]> git.ipfire.org Git - thirdparty/openssl.git/blame - crypto/bn/bn_lcl.h
Make sure to print the BN counting (BN_COUNT) to stderr instead of
[thirdparty/openssl.git] / crypto / bn / bn_lcl.h
CommitLineData
d02b48c6 1/* crypto/bn/bn_lcl.h */
58964a49 2/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
d02b48c6
RE
3 * All rights reserved.
4 *
5 * This package is an SSL implementation written
6 * by Eric Young (eay@cryptsoft.com).
7 * The implementation was written so as to conform with Netscapes SSL.
8 *
9 * This library is free for commercial and non-commercial use as long as
10 * the following conditions are aheared to. The following conditions
11 * apply to all code found in this distribution, be it the RC4, RSA,
12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
13 * included with this distribution is covered by the same copyright terms
14 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
15 *
16 * Copyright remains Eric Young's, and as such any Copyright notices in
17 * the code are not to be removed.
18 * If this package is used in a product, Eric Young should be given attribution
19 * as the author of the parts of the library used.
20 * This can be in the form of a textual message at program startup or
21 * in documentation (online or textual) provided with the package.
22 *
23 * Redistribution and use in source and binary forms, with or without
24 * modification, are permitted provided that the following conditions
25 * are met:
26 * 1. Redistributions of source code must retain the copyright
27 * notice, this list of conditions and the following disclaimer.
28 * 2. Redistributions in binary form must reproduce the above copyright
29 * notice, this list of conditions and the following disclaimer in the
30 * documentation and/or other materials provided with the distribution.
31 * 3. All advertising materials mentioning features or use of this software
32 * must display the following acknowledgement:
33 * "This product includes cryptographic software written by
34 * Eric Young (eay@cryptsoft.com)"
35 * The word 'cryptographic' can be left out if the rouines from the library
36 * being used are not cryptographic related :-).
37 * 4. If you include any Windows specific code (or a derivative thereof) from
38 * the apps directory (application code) you must include an acknowledgement:
39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
40 *
41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
51 * SUCH DAMAGE.
52 *
53 * The licence and distribution terms for any publically available version or
54 * derivative of this code cannot be changed. i.e. this code cannot simply be
55 * copied and put under another distribution licence
56 * [including the GNU Public Licence.]
57 */
dc434bbc
BM
58/* ====================================================================
59 * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved.
60 *
61 * Redistribution and use in source and binary forms, with or without
62 * modification, are permitted provided that the following conditions
63 * are met:
64 *
65 * 1. Redistributions of source code must retain the above copyright
66 * notice, this list of conditions and the following disclaimer.
67 *
68 * 2. Redistributions in binary form must reproduce the above copyright
69 * notice, this list of conditions and the following disclaimer in
70 * the documentation and/or other materials provided with the
71 * distribution.
72 *
73 * 3. All advertising materials mentioning features or use of this
74 * software must display the following acknowledgment:
75 * "This product includes software developed by the OpenSSL Project
76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
77 *
78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
79 * endorse or promote products derived from this software without
80 * prior written permission. For written permission, please contact
81 * openssl-core@openssl.org.
82 *
83 * 5. Products derived from this software may not be called "OpenSSL"
84 * nor may "OpenSSL" appear in their names without prior written
85 * permission of the OpenSSL Project.
86 *
87 * 6. Redistributions of any form whatsoever must retain the following
88 * acknowledgment:
89 * "This product includes software developed by the OpenSSL Project
90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
91 *
92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
103 * OF THE POSSIBILITY OF SUCH DAMAGE.
104 * ====================================================================
105 *
106 * This product includes cryptographic software written by Eric Young
107 * (eay@cryptsoft.com). This product includes software written by Tim
108 * Hudson (tjh@cryptsoft.com).
109 *
110 */
d02b48c6
RE
111
112#ifndef HEADER_BN_LCL_H
113#define HEADER_BN_LCL_H
114
ec577822 115#include <openssl/bn.h>
d02b48c6
RE
116
117#ifdef __cplusplus
118extern "C" {
119#endif
120
dc434bbc
BM
121
122/*
123 * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
124 *
125 *
126 * For window size 'w' (w >= 2) and a random 'b' bits exponent,
127 * the number of multiplications is a constant plus on average
128 *
129 * 2^(w-1) + (b-w)/(w+1);
130 *
131 * here 2^(w-1) is for precomputing the table (we actually need
132 * entries only for windows that have the lowest bit set), and
133 * (b-w)/(w+1) is an approximation for the expected number of
134 * w-bit windows, not counting the first one.
135 *
136 * Thus we should use
137 *
138 * w >= 6 if b > 671
139 * w = 5 if 671 > b > 239
140 * w = 4 if 239 > b > 79
141 * w = 3 if 79 > b > 23
142 * w <= 2 if 23 > b
143 *
144 * (with draws in between). Very small exponents are often selected
145 * with low Hamming weight, so we use w = 1 for b <= 23.
146 */
147#if 1
148#define BN_window_bits_for_exponent_size(b) \
149 ((b) > 671 ? 6 : \
150 (b) > 239 ? 5 : \
151 (b) > 79 ? 4 : \
152 (b) > 23 ? 3 : 1)
153#else
154/* Old SSLeay/OpenSSL table.
155 * Maximum window size was 5, so this table differs for b==1024;
156 * but it coincides for other interesting values (b==160, b==512).
157 */
158#define BN_window_bits_for_exponent_size(b) \
159 ((b) > 255 ? 5 : \
160 (b) > 127 ? 4 : \
161 (b) > 17 ? 3 : 1)
162#endif
163
164
165
dfeab068
RE
166/* Pentium pro 16,16,16,32,64 */
167/* Alpha 16,16,16,16.64 */
27eb622b
DSH
168#define BN_MULL_SIZE_NORMAL (16) /* 32 */
169#define BN_MUL_RECURSIVE_SIZE_NORMAL (16) /* 32 less than */
170#define BN_SQR_RECURSIVE_SIZE_NORMAL (16) /* 32 */
171#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */
172#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */
dfeab068 173
89cee61b 174#if !defined(NO_ASM) && !defined(NO_INLINE_ASM) && !defined(PEDANTIC)
fb81ac5e
AP
175/*
176 * BN_UMULT_HIGH section.
177 *
178 * No, I'm not trying to overwhelm you when stating that the
179 * product of N-bit numbers is 2*N bits wide:-) No, I don't expect
180 * you to be impressed when I say that if the compiler doesn't
181 * support 2*N integer type, then you have to replace every N*N
182 * multiplication with 4 (N/2)*(N/2) accompanied by some shifts
183 * and additions which unavoidably results in severe performance
184 * penalties. Of course provided that the hardware is capable of
185 * producing 2*N result... That's when you normally start
186 * considering assembler implementation. However! It should be
187 * pointed out that some CPUs (most notably Alpha, PowerPC and
188 * upcoming IA-64 family:-) provide *separate* instruction
189 * calculating the upper half of the product placing the result
190 * into a general purpose register. Now *if* the compiler supports
191 * inline assembler, then it's not impossible to implement the
192 * "bignum" routines (and have the compiler optimize 'em)
193 * exhibiting "native" performance in C. That's what BN_UMULT_HIGH
194 * macro is about:-)
195 *
196 * <appro@fy.chalmers.se>
197 */
198# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
199# if defined(__DECC)
200# include <c_asm.h>
201# define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
202# elif defined(__GNUC__)
203# define BN_UMULT_HIGH(a,b) ({ \
204 register BN_ULONG ret; \
205 asm ("umulh %1,%2,%0" \
206 : "=r"(ret) \
207 : "r"(a), "r"(b)); \
208 ret; })
209# endif /* compiler */
210# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
211# if defined(__GNUC__)
212# define BN_UMULT_HIGH(a,b) ({ \
213 register BN_ULONG ret; \
214 asm ("mulhdu %0,%1,%2" \
215 : "=r"(ret) \
216 : "r"(a), "r"(b)); \
217 ret; })
218# endif /* compiler */
219# endif /* cpu */
220#endif /* NO_ASM */
221
d02b48c6
RE
222/*************************************************************
223 * Using the long long type
224 */
225#define Lw(t) (((BN_ULONG)(t))&BN_MASK2)
226#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
227
775c63fc 228/* This is used for internal error checking and is not normally used */
dfeab068 229#ifdef BN_DEBUG
775c63fc 230# include <assert.h>
c9b51693 231# define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);
dfeab068 232#else
775c63fc 233# define bn_check_top(a)
dfeab068
RE
234#endif
235
236/* This macro is to add extra stuff for development checking */
237#ifdef BN_DEBUG
238#define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))
239#else
240#define bn_set_max(r)
241#endif
242
243/* These macros are used to 'take' a section of a bignum for read only use */
244#define bn_set_low(r,a,n) \
245 { \
246 (r)->top=((a)->top > (n))?(n):(a)->top; \
247 (r)->d=(a)->d; \
248 (r)->neg=(a)->neg; \
249 (r)->flags|=BN_FLG_STATIC_DATA; \
250 bn_set_max(r); \
251 }
252
253#define bn_set_high(r,a,n) \
254 { \
255 if ((a)->top > (n)) \
256 { \
257 (r)->top=(a)->top-n; \
258 (r)->d= &((a)->d[n]); \
259 } \
260 else \
261 (r)->top=0; \
262 (r)->neg=(a)->neg; \
263 (r)->flags|=BN_FLG_STATIC_DATA; \
264 bn_set_max(r); \
d02b48c6
RE
265 }
266
d02b48c6
RE
267#ifdef BN_LLONG
268#define mul_add(r,a,w,c) { \
269 BN_ULLONG t; \
270 t=(BN_ULLONG)w * (a) + (r) + (c); \
58964a49 271 (r)= Lw(t); \
d02b48c6
RE
272 (c)= Hw(t); \
273 }
274
275#define mul(r,a,w,c) { \
276 BN_ULLONG t; \
277 t=(BN_ULLONG)w * (a) + (c); \
58964a49 278 (r)= Lw(t); \
d02b48c6
RE
279 (c)= Hw(t); \
280 }
281
fb81ac5e
AP
282#define sqr(r0,r1,a) { \
283 BN_ULLONG t; \
284 t=(BN_ULLONG)(a)*(a); \
285 (r0)=Lw(t); \
aff0825c 286 (r1)=Hw(t); \
fb81ac5e
AP
287 }
288
289#elif defined(BN_UMULT_HIGH)
290#define mul_add(r,a,w,c) { \
291 BN_ULONG high,low,ret,tmp=(a); \
292 ret = (r); \
293 high= BN_UMULT_HIGH(w,tmp); \
294 ret += (c); \
295 low = (w) * tmp; \
296 (c) = (ret<(c))?1:0; \
297 (c) += high; \
298 ret += low; \
299 (c) += (ret<low)?1:0; \
300 (r) = ret; \
301 }
302
303#define mul(r,a,w,c) { \
304 BN_ULONG high,low,ret,ta=(a); \
305 low = (w) * ta; \
306 high= BN_UMULT_HIGH(w,ta); \
307 ret = low + (c); \
308 (c) = high; \
309 (c) += (ret<low)?1:0; \
310 (r) = ret; \
311 }
312
313#define sqr(r0,r1,a) { \
314 BN_ULONG tmp=(a); \
315 (r0) = tmp * tmp; \
316 (r1) = BN_UMULT_HIGH(tmp,tmp); \
317 }
318
d02b48c6
RE
319#else
320/*************************************************************
321 * No long long type
322 */
323
324#define LBITS(a) ((a)&BN_MASK2l)
325#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l)
326#define L2HBITS(a) ((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)
327
328#define LLBITS(a) ((a)&BN_MASKl)
329#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl)
330#define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)
331
332#define mul64(l,h,bl,bh) \
333 { \
334 BN_ULONG m,m1,lt,ht; \
335 \
336 lt=l; \
337 ht=h; \
338 m =(bh)*(lt); \
339 lt=(bl)*(lt); \
340 m1=(bl)*(ht); \
341 ht =(bh)*(ht); \
58964a49 342 m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \
d02b48c6
RE
343 ht+=HBITS(m); \
344 m1=L2HBITS(m); \
58964a49 345 lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
d02b48c6
RE
346 (l)=lt; \
347 (h)=ht; \
348 }
349
350#define sqr64(lo,ho,in) \
351 { \
352 BN_ULONG l,h,m; \
353 \
354 h=(in); \
355 l=LBITS(h); \
356 h=HBITS(h); \
357 m =(l)*(h); \
358 l*=l; \
359 h*=h; \
360 h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \
361 m =(m&BN_MASK2l)<<(BN_BITS4+1); \
58964a49 362 l=(l+m)&BN_MASK2; if (l < m) h++; \
d02b48c6
RE
363 (lo)=l; \
364 (ho)=h; \
365 }
366
367#define mul_add(r,a,bl,bh,c) { \
368 BN_ULONG l,h; \
369 \
370 h= (a); \
371 l=LBITS(h); \
372 h=HBITS(h); \
373 mul64(l,h,(bl),(bh)); \
374 \
375 /* non-multiply part */ \
58964a49 376 l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
d02b48c6 377 (c)=(r); \
58964a49 378 l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
d02b48c6 379 (c)=h&BN_MASK2; \
58964a49 380 (r)=l; \
d02b48c6
RE
381 }
382
383#define mul(r,a,bl,bh,c) { \
384 BN_ULONG l,h; \
385 \
386 h= (a); \
387 l=LBITS(h); \
388 h=HBITS(h); \
389 mul64(l,h,(bl),(bh)); \
390 \
391 /* non-multiply part */ \
392 l+=(c); if ((l&BN_MASK2) < (c)) h++; \
393 (c)=h&BN_MASK2; \
394 (r)=l&BN_MASK2; \
395 }
775c63fc 396#endif /* !BN_LLONG */
d02b48c6 397
fb92ba64
UM
398void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
399void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
400void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
401void bn_sqr_normal(BN_ULONG *r, BN_ULONG *a, int n, BN_ULONG *tmp);
402void bn_sqr_comba8(BN_ULONG *r,BN_ULONG *a);
403void bn_sqr_comba4(BN_ULONG *r,BN_ULONG *a);
404int bn_cmp_words(BN_ULONG *a,BN_ULONG *b,int n);
405void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t);
406void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
407 int tn, int n,BN_ULONG *t);
408void bn_sqr_recursive(BN_ULONG *r,BN_ULONG *a, int n2, BN_ULONG *t);
409void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
410void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
411 BN_ULONG *t);
412void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
413 BN_ULONG *t);
58964a49 414
d02b48c6
RE
415#ifdef __cplusplus
416}
417#endif
418
419#endif