protoize.c (safe_read, safe_write): Avoid the gcc extension of using arithmetic on...

[thirdparty/gcc.git] / gcc / Makefile.in

# Makefile for GNU C compiler.
#   Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.

#This file is part of GNU CC.

#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.

#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING.  If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston MA 02111-1307, USA.

# The targets for external use include:
# all, doc, proto, install, install-cross, install-cross-rest,
# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
# stage1, stage2, stage3, stage4.

# Suppress smart makes who think they know how to automake Yacc files
.y.c:

# Directory where sources are, from where we are.
srcdir = @srcdir@
VPATH = @srcdir@

# Variables that exist for you to override.
# See below for how to change them for certain systems.

# List of language subdirectories.
# This is overridden by configure.
SUBDIRS =@subdirs@

# Selection of languages to be made.
# This is overridden by configure.
CONFIG_LANGUAGES = @all_languages@
LANGUAGES = c proto gcov$(exeext) $(CONFIG_LANGUAGES)

# Languages should create dependencies of $(INTL_TARGETS) on generated
# sources in Make-lang.in.  Example:
# $(INTL_TARGETS): $(srcdir)/cp/parse.c
INTL_TARGETS = intl.all intl.install intl.distdir

# Selection of languages to be made during stage1 build.
# This is overridden by configure.
BOOT_LANGUAGES = c @all_boot_languages@

ALLOCA =
ALLOCA_FLAGS =
ALLOCA_FINISH = true

# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
# WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
# (And for stage 1 if the native compiler is GCC.)  It is
# separate from BOOT_CFLAGS because people tend to override optimization
# flags and we'd like them to still have warnings turned on.  They are free
# to explicitly turn warnings off if they wish.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
XCFLAGS =
TCFLAGS =
CFLAGS = -g @stage1_warn_cflags@
BOOT_CFLAGS = -O2 $(CFLAGS)
WARN_CFLAGS = -W -Wall
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =

X_CPPFLAGS =
T_CPPFLAGS =

AWK = @AWK@
CC = @CC@
# srcdir might be a relative pathname which won't be valid in a subdirectory,
# so we must use objdir/srcdir instead to make it safe.  objdir is always
# a full pathname.
BISON = `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
	/*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
	*) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
	esac; else echo bison ; fi`
BISONFLAGS =
LEX = `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
LEXFLAGS =
AR = ar
AR_FLAGS = rc
LN = @symbolic_link@
DLLTOOL = dlltool
SHELL = /bin/sh
# on sysV, define this as cp.
INSTALL = @INSTALL@
# Some systems may be missing symbolic links, regular links, or both.
# Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
LN=@LN@
LN_S=@LN_S@
# These permit overriding just for certain files.
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
MAKEINFO = `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
	then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
	else echo makeinfo ; fi`
MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
@SET_MAKE@

# Define this as & to perform parallel make on a Sequent.
# Note that this has some bugs, and it seems currently necessary
# to compile all the gen* files first by hand to avoid erroneous results.
P =

# How to invoke ranlib.
RANLIB = ranlib
# Test to use to see whether ranlib exists on the system.
RANLIB_TEST = \
  [ -f $(RANLIB) ] \
  || [ -f /usr/bin/ranlib -o -f /bin/ranlib ]

# Compiler to use for compiling libgcc1.a.
# OLDCC should not be the GNU C compiler,
# since that would compile typical libgcc1.a functions such as mulsi3
# into infinite recursions.
OLDCC = cc

# CFLAGS for use with OLDCC, for compiling libgcc1.a.
# NOTE: -O does not work on some Unix systems!
CCLIBFLAGS = -O

# Version of ar to use when compiling libgcc1.a.
OLDAR = ar
OLDAR_FLAGS = qc

# Target to use when installing include directory.  Either
# install-headers-tar or install-headers-cpio.
INSTALL_HEADERS_DIR = @build_install_headers_dir@

# Header files that are made available under the same name
# to programs compiled with GCC.
USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
    $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/proto.h \
    $(srcdir)/ginclude/stdbool.h $(srcdir)/ginclude/iso646.h \
    $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS)

# Target to use whe installing assert.h.  Some systems may
# want to set this empty.
INSTALL_ASSERT_H = install-assert-h

# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
GCC_FOR_TARGET = ./xgcc -B$(build_tooldir)/bin/ -B./ -I$(build_tooldir)/include

# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -I./include to find, e.g., stddef.h.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)

# Sed command to transform gcc to installed name.  Overwritten by configure.
program_transform_name = @program_transform_name@
program_transform_cross_name = s,^,$(target_alias)-,

build_canonical = @build_canonical@
host_canonical = @host_canonical@

# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
# to the makefile when making a cross-compiler.

# Use the tools from the build tree, if they are available.

# objdir is set by configure.
objdir = @objdir@

AR_FOR_TARGET = ` \
  if [ -f $(objdir)/../binutils/ar ] ; then \
    echo $(objdir)/../binutils/ar ; \
  else \
    if [ "$(host_canonical)" = "$(target)" ] ; then \
      echo ar; \
    else \
       t='$(program_transform_name)'; echo ar | sed -e $$t ; \
    fi; \
  fi`
AR_FLAGS_FOR_TARGET = rc
RANLIB_FOR_TARGET = ` \
  if [ -f $(objdir)/../binutils/ranlib ] ; then \
    echo $(objdir)/../binutils/ranlib ; \
  else \
    if [ "$(host_canonical)" = "$(target)" ] ; then \
      echo ranlib; \
    else \
       t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
    fi; \
  fi`
RANLIB_TEST_FOR_TARGET = \
  [ -f $(RANLIB_FOR_TARGET) ] \
  || ( [ "$(host_canonical)" = "$(target)" ] \
       && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )

# Dir to search for system headers.  Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include

# Control whether to run fixproto.
STMP_FIXPROTO = stmp-fixproto

# Test to see whether <limits.h> exists in the system header files.
LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]

target=@target@
target_alias=@target_alias@
xmake_file=@dep_host_xmake_file@
tmake_file=@dep_tmake_file@
out_file=$(srcdir)/config/@out_file@
out_object_file=@out_object_file@
md_file=$(srcdir)/config/@md_file@
tm_file=@tm_file_list@
build_xm_file=@build_xm_file_list@
host_xm_file=@host_xm_file_list@
lang_specs_files=@lang_specs_files@
lang_options_files=@lang_options_files@
lang_tree_files=@lang_tree_files@
GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
GTHREAD_FLAGS=@gthread_flags@
# Be prepared for gcc2 merges.
gcc_version=@gcc_version@
gcc_version_trigger=@gcc_version_trigger@
version=$(gcc_version)
mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`

# Common prefix for installation directories.
# NOTE: This directory must exist when you start installation.
prefix = @prefix@
# Directory in which to put localized header files. On the systems with
# gcc as the native cc, `local_prefix' may not be `prefix' which is
# `/usr'.
# NOTE: local_prefix *should not* default from prefix.
local_prefix = @local_prefix@
# Directory in which to put host dependent programs and libraries
exec_prefix = @exec_prefix@
# Directory in which to put the executable for the command `gcc'
bindir = @bindir@
# Directory in which to put the directories used by the compiler.
libdir = @libdir@
# Directory in which the compiler finds executables, libraries, etc.
libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(version)
# Used to produce a relative $(gcc_tooldir) in gcc.o
unlibsubdir = ../../..
# Directory in which to find other cross-compilation tools and headers.
dollar = @dollar@
# Used in install-cross.
gcc_tooldir = @gcc_tooldir@
# Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
build_tooldir = $(exec_prefix)/$(target_alias)
# Directory in which the compiler finds g++ includes.
gcc_gxx_include_dir= @gcc_gxx_include_dir@
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# assertdir is overridden in cross-make.
# (But this currently agrees with what is in cross-make.)
assertdir = $(gcc_tooldir)/include
# where the info files go
infodir = @infodir@
# Where cpp should go besides $prefix/bin if necessary
cpp_install_dir = @cpp_install_dir@
# where the locale files go
datadir = $(prefix)/@DATADIRNAME@
localedir = $(datadir)/locale
# Extension (if any) to put in installed man-page filename.
manext = .1
objext = .o
exeext = @host_exeext@
build_exeext = @build_exeext@

# Directory in which to put man pages.
mandir = @mandir@
man1dir = $(mandir)/man1
# Dir for temp files.
tmpdir = /tmp

# Top build directory, relative to here.
top_builddir = .

# Whether we were configured with NLS.
USE_NLS = @USE_NLS@

# Internationalization library.
INTLLIBS = @INTLLIBS@

# List of internationalization subdirectories.
POSUB = @POSUB@
INTL_SUBDIRS = intl $(POSUB)

# Additional system libraries to link with.
CLIB=

# Change this to a null string if obstacks are installed in the
# system library.
OBSTACK=obstack.o

# The GC method to be used on this system.
GGC=@GGC@.o

# If a supplementary library is being used for the GC.
GGC_LIB=

# Configure will set these if you need vfprintf and possibly _doprnt support.
VFPRINTF=@vfprintf@
DOPRINT=@doprint@

# Specify the rule for actually making libgcc.a,
LIBGCC = libgcc.a
# and the rule for installing it.
INSTALL_LIBGCC = install-libgcc

# Specify the rule for actually making libgcc1.a.
# The value may be empty; that means to do absolutely nothing
# with or for libgcc1.a.
LIBGCC1 = libgcc1.a

# Specify the rule for making libgcc1.a for a cross-compiler.
# The default rule assumes that libgcc1.a is supplied by the user.
CROSS_LIBGCC1 = libgcc1.cross

# Specify the rule for actually making libgcc2.a.
LIBGCC2 = libgcc2.a

# Options to use when compiling libgcc2.a.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# so that -g1 will be tested.
#
LIBGCC2_DEBUG_CFLAGS = -g1
LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@

# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
LIBGCC2_INCLUDES =

# Additional target-dependent options for compiling libgcc2.a.
TARGET_LIBGCC2_CFLAGS =

# Things which must be built before building libgcc2.a.
# Some targets override this to stmp-int-hdrs
LIBGCC2_DEPS =

# libgcc1-test target (must also be overridable for a target)
LIBGCC1_TEST = libgcc1-test

# List of extra executables that should be compiled for this target machine
# that are used for compiling from source code to object code.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PASSES =@extra_passes@

# Like EXTRA_PASSES, but these are used when linking.
EXTRA_PROGRAMS = @extra_programs@

# List of extra object files that should be compiled for this target machine.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PARTS = @extra_parts@

# List of extra object files that should be compiled and linked with
# compiler proper (cc1, cc1obj, cc1plus).
EXTRA_OBJS = @extra_objs@

# List of extra object files that should be compiled and linked with
# the gcc driver.
EXTRA_GCC_OBJS =@host_extra_gcc_objs@

# List of additional header files to install.
# Often this is edited directly by `configure'.
EXTRA_HEADERS =@extra_headers_list@

# Set this to `collect2' to enable use of collect2.
USE_COLLECT2 = @will_use_collect2@
# If we might be using collect2, then this variable will be set to
# -DUSE_COLLECT2.  toplev.c, collect2.c and libgcc2.c all need to
# if we may be using collect2.
MAYBE_USE_COLLECT2 = @maybe_use_collect2@
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
USE_COLLECT2 = collect2$(exeext)

# List of extra C and assembler files to add to libgcc1.a.
# Assembler files should have names ending in `.asm'.
LIB1FUNCS_EXTRA =

# List of extra C and assembler files to add to libgcc2.a.
# Assembler files should have names ending in `.asm'.
LIB2FUNCS_EXTRA =

# Handle cpp installation.
INSTALL_CPP=
UNINSTALL_CPP=

# We do not try to build float.h anymore.  Let configure select the
# appropriate pre-built float.h file for the target.
FLOAT_H=@float_h_file@

# Program to convert libraries.
LIBCONVERT =

# Control whether header files are installed.
INSTALL_HEADERS=install-headers

# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
# *Do not* use this for directories that happen to contain
# header files, but are not searched automatically by default.
# On most systems, this is empty.
OTHER_FIXINCLUDES_DIRS=

# A list of all the language-specific executables.
# This is overridden by configure.
COMPILERS = cc1$(exeext) @all_compilers@

# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES)

# List of things which should already be built whenever we try to use xgcc
# to link anything.
GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)

# Directory to link to, when using the target `maketest'.
DIR = ../gcc

# Guaranteed to not exist when not passing md through cpp.
# This value is overridden directly by configure.
MD_FILE = md-cpp-not-used

# Flags to use when cross-building GCC.
# Prefix to apply to names of object files when using them
# to run on the machine we are compiling on.
HOST_PREFIX=
# Prefix to apply to names of object files when compiling them
# to run on the machine we are compiling on.
# The default for this variable is chosen to keep these rules
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
HOST_CFLAGS=$(ALL_CFLAGS)
HOST_CLIB=$(CLIB)
HOST_INTLLIBS=$(INTLLIBS)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
HOST_ALLOCA=$(ALLOCA)
HOST_MALLOC=$(MALLOC)
HOST_OBSTACK=$(OBSTACK)
HOST_VFPRINTF=$(VFPRINTF)
HOST_DOPRINT=$(DOPRINT)

# Actual name to use when installing a native compiler.
GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t`
CPP_INSTALL_NAME = `t='$(program_transform_name)'; echo cpp | sed -e $$t`
PROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo protoize | sed -e $$t`
UNPROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
GCOV_INSTALL_NAME = `t='$(program_transform_name)'; echo gcov | sed -e $$t`

# Actual name to use when installing a cross-compiler.
GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
PROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
UNPROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`

# Choose the real default target.
ALL=all.internal

# Choose the real install target.
INSTALL_TARGET=install-normal

# Setup the testing framework, if you have one
EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
            echo $${rootme}/../expect/expect ; \
          else echo expect ; fi`

RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
	       echo $${srcdir}/../dejagnu/runtest ; \
	    else echo runtest; fi`
RUNTESTFLAGS =

# Extra symbols for fixproto to define when parsing headers.
FIXPROTO_DEFINES =

# Extra flags to use when compiling crt{begin,end}.o.
CRTSTUFF_T_CFLAGS =

# Extra flags to use when compiling [m]crt0.o.
CRT0STUFF_T_CFLAGS =

# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
T =

# End of variables for you to override.

# Definition of `all' is here so that new rules inserted by sed
# do not specify the default target.
# The real definition is under `all.internal' (for native compilers)
# or `all.cross' (for cross compilers).
all: all.indirect

# This tells GNU Make version 3 not to put all variables in the environment.
.NOEXPORT:

# sed inserts variable overrides after the following line.
####target overrides
@target_overrides@

####host overrides
@host_overrides@

####cross overrides
@cross_defines@
@cross_overrides@

####build overrides
@build_overrides@
#\f
# Now figure out from those variables how to compile and link.

all.indirect: $(ALL)

# IN_GCC tells various files that system.h, toplev.c, etc are available.
INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@

# This is the variable actually used when we compile.
# If you change this line, you probably also need to change the definition
# of HOST_CFLAGS in build-make to match.
ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) \
	@DEFS@

# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)

# Even if ALLOCA is set, don't use it if compiling with GCC.
USE_ALLOCA= ${ALLOCA}
USE_HOST_ALLOCA= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
USE_HOST_VFPRINTF= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
USE_HOST_DOPRINT= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `

# Dependency on obstack, alloca, malloc or whatever library facilities
# are not installed in the system libraries.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
LIBDEPS= $(INTLLIBS) $(OBSTACK) $(ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT)

# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_INTLLIBS) $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)

# How to link with both our special library facilities
# and the system's installed libraries.
LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(INTLLIBS) @LIBS@ $(VFPRINTF) $(DOPRINT) $(CLIB) ../libiberty/libiberty.a

# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC)  \
	    $(HOST_INTLLIBS) $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) \
	    $(HOST_CLIB)

HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o $(HOST_PREFIX)ggc-none.o
HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
HOST_ERRORS = $(HOST_PREFIX)errors.o

# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config -I$(srcdir)/../include

# Always use -I$(srcdir)/config when compiling.
.c.o:
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

# This tells GNU make version 3 not to export all the variables
# defined in this file into the environment.
.NOEXPORT:
#\f
# Support for additional languages (other than c and objc).
# ??? objc can be supported this way too (leave for later).

# These next lines are overridden by configure.
LANG_MAKEFILES = @all_lang_makefiles@
LANG_STAGESTUFF = @all_stagestuff@
LANG_DIFF_EXCLUDES = @all_diff_excludes@
LANG_LIB2FUNCS = @all_lib2funcs@
LANG_EXTRA_HEADERS = @all_headers@

# Flags to pass to recursive makes.
# CC is set by configure.  Hosts without symlinks need special handling
# because we need CC="stage1/xgcc -Bstage1/" to work in the language
# subdirectories.
# ??? The choices here will need some experimenting with.
ORDINARY_FLAGS_TO_PASS = \
	"AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
	"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
	"BISON=$(BISON)" \
	"BISONFLAGS=$(BISONFLAGS)" \
	"CFLAGS=$(CFLAGS)" \
	"CLIB=$(CLIB)" \
	"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
	"LDFLAGS=$(LDFLAGS)" \
	"LEX=$(LEX)" \
	"LEXFLAGS=$(LEXFLAGS)" \
	"LN=$(LN)" \
	"LN_S=$(LN_S)" \
	"MAKEINFO=$(MAKEINFO)" \
	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
	"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
	"SHELL=$(SHELL)" \
	"STAGE_PREFIX=@stage_prefix_set_by_configure@" \
	"exeext=$(exeext)" \
	"build_exeext=$(build_exeext)" \
	"objext=$(objext)" \
	"exec_prefix=$(exec_prefix)" \
	"prefix=$(prefix)" \
	"local_prefix=$(local_prefix)" \
	"gxx_include_dir=$(gcc_gxx_include_dir)" \
	"tooldir=$(tooldir)" \
	"gcc_tooldir=$(gcc_tooldir)" \
	"bindir=$(bindir)" \
	"libsubdir=$(libsubdir)" \
	"datadir=$(datadir)" \
	"distdir=../tmp/\$$(subdir)" \
	"localedir=$(localedir)"
FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) "CC=@cc_set_by_configure@"
PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \
	-e 's|^ *[^ /][^ /]*/|%&|' \
	-e 's| -B| -B%|g' \
	-e 's|% *[^- /]|%&|g' \
	-e 's|%% *|../|g' \
	-e 's|%||g'
SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \
  "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
#\f
# Lists of files for various purposes.

# Language-specific object files for C and Objective C.
C_AND_OBJC_OBJS = c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
  c-aux-info.o c-common.o c-iterate.o @extra_c_objs@

# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)

# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
 builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
 insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
 profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
 lists.o ggc-common.o $(GGC)

# GEN files are listed separately, so they can be built before doing parallel
#  makes for cc1 or cc1plus.  Otherwise sequent parallel make attempts to load
#  them before rtl.o is compiled.
GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \
 genpeep gengenrtl gencheck

CCCP=@cpp_main@

# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
 s-flags s-config s-codes s-mlib s-unders s-genrtl \
 s-output s-recog s-emit s-extract s-peep s-check \
 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
 genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
 genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
 genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
 genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
 gencheck$(build_exeext) \
 xgcc$(exeext) xcpp$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \
 $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
 $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
 protoize$(exeext) unprotoize$(exeext) \
 specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
 gcov$(exeext) *.bp \
 *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
 *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse *.flow2 *.peephole2 \
 *.[si] libcpp.a \
 $(LANG_STAGESTUFF)

# Members of libgcc1.a.
LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
   _lshrsi3 _ashrsi3 _ashlsi3 \
   _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
   _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
   _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
   _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
   _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2

# Library members defined in libgcc2.c.
LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
     _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
    _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
    _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
    _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
    _fixtfdi _fixunstfdi _floatditf \
    __gcc_bcmp _varargs __dummy _eprintf \
    _bb _shtab _clear_cache _trampoline __main _exit \
    _ctors _pure

LIB2FUNCS_EH = _eh

FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
    _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
    _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
    _sf_to_df _thenan_sf

DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
    _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
    _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
    _df_to_sf _thenan_df

# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# All they would do is cause complete recompilation every time
# one of the machine description files is edited.
# That may or may not be what one wants to do.
# If it is, rm *.o is an easy way to do it.
# CONFIG_H = $(host_xm_file) $(tm_file)
CONFIG_H =
MACHMODE_H = machmode.h machmode.def
RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
RTL_H = $(RTL_BASE_H) genrtl.h
TREE_H = tree.h real.h tree.def $(MACHMODE_H) tree-check.h
BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h
DEMANGLE_H = $(srcdir)/../include/demangle.h
RECOG_H = recog.h
EXPR_H = expr.h insn-codes.h
REGS_H = regs.h varray.h $(MACHMODE_H)
#\f
# Language makefile fragments.

# The following targets define the interface between us and the languages.
#
# all.build, all.cross, start.encap, rest.encap,
# info, dvi,
# install-normal, install-common, install-info, install-man,
# uninstall, distdir,
# mostlyclean, clean, distclean, extraclean, maintainer-clean,
# stage1, stage2, stage3, stage4
#
# Each language is linked in with a series of hooks (since we can't use `::'
# targets).  The name of each hooked is "lang.${target_name}" (eg: lang.info).
# Configure computes and adds these here.

####language hooks
@language_hooks@

# sed inserts language fragments after the following line.
####language fragments
@language_fragments@

# End of language makefile fragments.
#\f
# The only suffixes we want for implicit rules are .c and .o, so clear
# the list and add them.  This speeds up GNU Make, and allows -r to work.
.SUFFIXES:
.SUFFIXES: .c .o

Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \
   $(xmake_file) $(tmake_file) $(LANG_MAKEFILES)
	$(SHELL) $(srcdir)/configure.frag $(srcdir) "$(SUBDIRS)" \
		"$(xmake_file)" "$(tmake_file)"
	cp config.status config.run
	LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.run
	rm -f config.run

$(srcdir)/configure: $(srcdir)/configure.in
	cd $(srcdir); autoconf

# cstamp-h.in controls rebuilding of config.in.
# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
# delete it.  A stamp file is needed as autoheader won't update the file if
# nothing has changed.
# It remains in the source directory and is part of the distribution.
# This follows what is done in shellutils, fileutils, etc.
# "echo timestamp" is used instead of touch to be consistent with other
# packages that use autoconf (??? perhaps also to avoid problems with patch?).
# ??? Newer versions have a maintainer mode that may be useful here.
$(srcdir)/config.in: $(srcdir)/cstamp-h.in
$(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
	cd $(srcdir) && autoheader
	@rm -f $(srcdir)/cstamp-h.in
	echo timestamp > $(srcdir)/cstamp-h.in
auto-host.h: cstamp-h ; @true
cstamp-h: config.in config.status
	CONFIG_HEADERS=auto-host.h:config.in LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status

# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date.  So we must verify that
# config.status does not exist before failing.
config.status: $(srcdir)/configure version.c
	@if [ ! -f config.status ] ; then \
	  echo You must configure gcc.  Look at the INSTALL file for details.; \
	  false; \
	else \
	  LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status --recheck; \
	fi

all.internal: start.encap rest.encap doc
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
all.cross: native gcc-cross xcpp$(exeext) specs stmp-headers $(STMP_FIXPROTO) \
	$(LIBGCC) $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc$(exeext) xcpp$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
start.encap: native xgcc$(exeext) xcpp$(exeext) specs $(LIBGCC1) \
	xlimits.h lang.start.encap
# These can't be made until after GCC can run.
rest.encap: stmp-headers $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
native: config.status auto-host.h cpp$(exeext) intl.all $(LANGUAGES) \
	$(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)

# Define the names for selecting languages in LANGUAGES.
C c: cc1$(exeext)
PROTO: proto

# Tell GNU make these are phony targets.
.PHONY: C c PROTO proto

# On the target machine, finish building a cross compiler.
# This does the things that can't be done on the host machine.
rest.cross: $(LIBGCC) specs

# Verify that it works to compile and link libgcc1-test.
# If it does, then there are sufficient replacements for libgcc1.a.
libgcc1-test: libgcc1-test.o native $(GCC_PARTS)
	@echo "Testing libgcc1.  Ignore linker warning messages."
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
	  -nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
libgcc1-test.o: libgcc1-test.c native xgcc$(exeext)
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c

# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
compilations: ${OBJS}

# Create a list of the language-independent object files so the language
# subdirectories needn't mention their names explicitly.
stamp-objlist: $(OBJS)
	echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist

# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
# and CC is `gcc'.  It is renamed to `gcc' when it is installed.
xgcc$(exeext): gcc.o gccspec.o version.o intl.o prefix.o \
   version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o gccspec.o intl.o \
	  prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)

# We call this executable `xcpp' rather than `cpp'
# since the real preprocessor is named `cpp'.  It too is renamed
# when it is installed.
# The only difference from xgcc is that it's linked with cppspec.o
# instead of gccspec.o.
xcpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \
   version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o cppspec.o intl.o \
	  prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)

# Dump a specs file to make -B./ read these specs over installed ones.
specs: xgcc$(exeext)
	$(GCC_FOR_TARGET) -dumpspecs > tmp-specs
	mv tmp-specs specs

# We do want to create an executable named `xgcc', so we can use it to
# compile libgcc2.a.
# Also create gcc-cross, so that install-common will install properly.
gcc-cross: xgcc$(exeext)
	cp xgcc$(exeext) gcc-cross$(exeext)

cc1$(exeext): $(P) $(OBJS) $(C_OBJS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(C_OBJS) $(LIBS)

# Build the version of limits.h that we will install.
xlimits.h: glimits.h limitx.h limity.h
	if $(LIMITS_H_TEST) ; then \
	  cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
	else \
	  cat $(srcdir)/glimits.h > tmp-xlimits.h; \
	fi
	mv tmp-xlimits.h xlimits.h
#\f
# Build libgcc.a.
# This is done in two parts because some functions, in libgcc1.c,
# must be compiled with something other than GCC,
# while the rest, in libgcc2.c, must be compiled with xgcc.
# That means we can't do libgcc2.c until after xgcc, cc1, etc.

# Use this as value of LIBGCC1 to cause conversion to GNU library format.
# LIBCONVERT should put its output in libgcc1.conv.
libgcc1.conv: libgcc1.a
	$(LIBCONVERT) libgcc1.a libgcc1.conv

# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
# Make an empty file instead.
libgcc1.null: $(GCC_PASSES)
	echo "void __foo () {}" > dummy.c
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
	$(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) libgcc1.null dummy$(objext)
	rm -f dummy$(objext) dummy.c

# This is $(LIBGCC1) for a cross-compiler.
# We have no automatic way of building libgcc1.a,
# so it's up to the installer to find a way to do that.
# This rule deliberately does not depend on libgcc1.a
# so that it will fail if the installer hasn't provided it.
libgcc1.cross:
	mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)

# Compile the library of arithmetic subroutines with the native compiler.
# Don't compile it with GCC!
# (That would cause most arithmetic functions to call themselves.)
#
# NOTE: If you modify these rules substantially, please be sure to
# check at least config/i386/t-sco5 and possibly other makefile
# fragments.
libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
	-rm -f tmplibgcc1.a
# Actually build it in tmplibgcc1.a, then rename at end,
# so that libgcc1.a itself remains nonexistent if compilation is aborted.
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
#	set -e;
	for name in $(LIB1FUNCS); \
	do \
	  echo $${name}; \
	  rm -f $${name}$(objext); \
	  $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	  mv libgcc1$(objext) $${name}$(objext); \
	  $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
	  rm -f $${name}$(objext); \
	done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
	for file in .. $(LIB1FUNCS_EXTRA); \
	do \
	  if [ x$${file} != x.. ]; then \
	    name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
	    echo $${name}; \
	    if [ $${name}.asm = $${file} ]; then \
	      cp $${file} $${name}.s || exit 1; file=$${name}.s; \
	    else true; fi; \
	    $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
	    if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	    $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
	    if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	    rm -f $${name}.s $${name}$(objext); \
	  else true; \
	  fi; \
	done
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) tmplibgcc1.a; \
	else true; fi
	mv tmplibgcc1.a libgcc1.a

# Build libgcc1.a from assembler source.  LIB1ASMFUNCS is the list of
# functions.  LIB1ASMSRC is the name of the source file in the config
# subdirectory.
libgcc1-asm.a: libgcc2.ready config.status $(srcdir)/config/$(LIB1ASMSRC)
	-rm -f tmplibgcc1.a libgcc1.S
	cp $(srcdir)/config/$(LIB1ASMSRC) libgcc1.S
# Actually build it in tmplibgcc1.a, then rename at end,
# so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
#	set -e;
	for name in $(LIB1ASMFUNCS); \
	do \
	  echo $${name}; \
	  $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	  mv libgcc1$(objext) $${name}$(objext); \
	  $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc1.a $${name}$(objext); \
	  rm -f $${name}$(objext); \
	done
	-rm -f libgcc1.S
	mv tmplibgcc1.a libgcc1-asm.a

# Generate assembly versions of the functions required for libgcc1.
# You'll still need to massage the code by hand (possibly hacking
# underscores and local labels) but this will get you started.
libgcc1.S: libgcc1.c $(CONFIG_H) config.status
	-rm -f libgcc1.S
	touch libgcc1.S
	for name in $(LIB1FUNCS); \
	do \
	  echo $${name}; \
	  $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	  echo '#ifdef ' L$${name} >> libgcc1.S; \
	  cat  libgcc1.s >> libgcc1.S; \
	  echo '#endif /*' L$${name} '*/' >> libgcc1.S; \
	  echo "" >> libgcc1.S; \
	done

# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
# But recompiling cc1 should not force recompilation of libgcc2.a.
# If you want to force recompilation, delete libgcc2.a.
libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs $(STMP_FIXPROTO)
	-if [ -f libgcc2.ready ] ; then \
		true; \
	else \
		touch libgcc2.ready; \
	fi

LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \
   $(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
	-rm -f tmplibgcc2.a
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
#	set -e;
	for name in $(LIB2FUNCS); \
	do \
	  echo $${name}; \
	  $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
	      $(MAYBE_USE_COLLECT2) $(srcdir)/libgcc2.c -o $${name}$(objext); \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	  $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
	  rm -f $${name}$(objext); \
	done
	for name in $(LIB2FUNCS_EH); \
	do \
	  echo $${name}; \
	  $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) -fexceptions $(INCLUDES) -c \
	      -DL$${name} $(srcdir)/libgcc2.c -o $${name}$(objext); \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	  $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
	  rm -f $${name}$(objext); \
	done
	if [ x$(FPBIT) != x ]; then \
	  for name in $(FPBIT_FUNCS); \
	  do \
	    echo $${name}; \
	    $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
	        -DFINE_GRAINED_LIBRARIES $(FPBIT) -o $${name}$(objext); \
	    if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	    $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
	    rm -f $${name}$(objext); \
	  done; \
	else true; fi;
	if [ x$(DPBIT) != x ]; then \
	  for name in $(DPBIT_FUNCS); \
	  do \
	    echo $${name}; \
	    $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
	        -DFINE_GRAINED_LIBRARIES $(DPBIT) -o $${name}$(objext); \
	    if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	    $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
	    rm -f $${name}$(objext); \
	  done; \
	else true; fi;
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
	for file in $(LIB2ADD); do \
	  name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
	  oname=` echo $${name} | sed -e 's,.*/,,'`; \
	  if [ $${name}.txt = $${file} ]; then \
	    for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
	      $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
		AR_FOR_TARGET="$(AR_FOR_TARGET)" \
		AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" CC="$(CC)" \
		CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
		HOST_PREFIX_1="$(HOST_PREFIX_1)" \
		LANGUAGES="$(LANGUAGES)" \
		LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
	      if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	      $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${f}; \
	      rm -f $${f}; \
	    else true; \
	    fi; done; \
	  else \
	    echo $${name}; \
	    if [ $${name}.asm = $${file} ]; then \
	      cp $${file} $${name}.s || exit 1; file=$${name}.s; \
	    else true; fi; \
	    $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
	    if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	    $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${oname}$(objext); \
	    rm -f $${name}.s $${oname}$(objext); \
	  fi; \
	done
	mv tmplibgcc2.a libgcc2.a
# These lines were deleted from above the mv command
# because ranlibing libgcc.a itself should suffice.
#	-if [ x${HPUX_GAS} = x ] ; then \
#	  if $(RANLIB_TEST_FOR_TARGET) ; then \
#	    $(RANLIB_FOR_TARGET) tmplibgcc2.a;
#	  else true; fi; \
#	else true; fi

# Combine the various libraries into a single library, libgcc.a.
libgcc.a: $(LIBGCC1) $(LIBGCC2)
	-rm -rf tmplibgcc.a libgcc.a tmpcopy
	mkdir tmpcopy
	-if [ x$(LIBGCC1) != x ];			\
	then (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC1));	\
	else true;					\
	fi
# Some versions of ar (specifically the one in RISC/os 5.x), create an
# unwritable table of contents file, and then print an error message when
# the second ar command tries to overwrite this file.  To avoid the error
# message from ar, we make sure all files are writable.
	-(cd tmpcopy; chmod +w * > /dev/null 2>&1)
	(cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC2))
	(cd tmpcopy; $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) ../tmplibgcc.a *$(objext))
	rm -rf tmpcopy
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) tmplibgcc.a; \
	else true; fi
# Actually build it in tmplibgcc.a, then rename at end,
# so that libgcc.a itself remains nonexistent if compilation is aborted.
	mv tmplibgcc.a libgcc.a

# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
# switches.
multilib.h: s-mlib; @true
s-mlib: $(srcdir)/genmultilib Makefile
	$(SHELL) $(srcdir)/genmultilib \
	  "$(MULTILIB_OPTIONS)" \
	  "$(MULTILIB_DIRNAMES)" \
	  "$(MULTILIB_MATCHES)" \
	  "$(MULTILIB_EXCEPTIONS)" \
	  "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
	$(SHELL) $(srcdir)/move-if-change tmp-mlib.h multilib.h
	touch s-mlib

# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
   frame.h \
   $(LIB2ADD) $(MACHMODE_H) longlong.h gbl-ctors.h config.status
	for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
	  dir=`echo $$i | sed -e 's/;.*$$//'`; \
	  flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
	  $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
	    AR_FOR_TARGET="$(AR_FOR_TARGET)" \
	    AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
	    CC="$(CC)" CFLAGS="$(CFLAGS)" \
	    RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
	    RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
	    LANGUAGES="$(LANGUAGES)" \
	    HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
	    LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
	    MULTILIB_CFLAGS="$${flags}" \
	    LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
	    dir="$${dir}" stmp-multilib-sub; \
	  if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
	done
	touch stmp-multilib

# Subroutine of stmp-multilib so make -n works.
stmp-multilib-sub:
	rm -f $(LIBGCC2)
	if [ -d $(dir) ]; then \
	  cd $(dir); \
	  rm -f libgcc.a $(EXTRA_MULTILIB_PARTS); \
	else true; \
	fi
	$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
	  AR_FOR_TARGET="$(AR_FOR_TARGET)" \
	  AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
	  CC="$(CC)" CFLAGS="$(CFLAGS)" \
	  HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
	  LANGUAGES="$(LANGUAGES)" \
	  LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2)
	if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
	then true; \
	else rm -f $(LIBGCC1); \
	fi
	if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
	then true; \
	else \
	  $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
	    AR_FOR_TARGET="$(AR_FOR_TARGET)" \
	    AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
	    CC="$(CC)" CFLAGS="$(CFLAGS)" \
	    HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
	    LANGUAGES="$(LANGUAGES)" \
	    LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \
	fi
	rm -rf tmplibgcc.a tmpcopy
	mkdir tmpcopy
	if [ x$(LIBGCC1) != x ]; \
	then (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC1)); \
	else true; \
	fi
# Some versions of ar (specifically the one in RISC/os 5.x), create an
# unwritable table of contents file, and then print an error message when
# the second ar command tries to overwrite this file.  To avoid the error
# message from ar, we make sure all files are writable.
	-(cd tmpcopy; chmod +w * > /dev/null 2>&1)
	(cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC2))
	(cd tmpcopy; $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) ../tmplibgcc.a *$(objext))
	rm -rf libgcc2.a tmpcopy
	if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) tmplibgcc.a; \
	else true; fi
	if [ -d $(dir) ]; then true; else mkdir $(dir); fi
	mv tmplibgcc.a $(dir)/libgcc.a
	for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
	  $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
	    AR_FOR_TARGET="$(AR_FOR_TARGET)" \
	    AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
	    CC="$(CC)" CFLAGS="$(CFLAGS)" \
	    HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
	    LANGUAGES="$(LANGUAGES)" \
	    MULTILIB_CFLAGS="$(MULTILIB_CFLAGS)" T="t" t$${f}; \
	  mv t$${f} $(dir)/$${f}; \
	else true; \
	fi; done

# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
# constructors.
$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
  defaults.h frame.h gbl-ctors.h
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
	  -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
	  -c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext)

$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
  defaults.h frame.h gbl-ctors.h
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
	  -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
	  -c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)

# On some systems we also want to install versions of these files
# compiled using PIC for use in shared libraries.
crtbeginS.o crtendS.o: s-crtS ; @true

s-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
  defaults.h frame.h gbl-ctors.h
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
	  -DCRT_BEGIN -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
	  -fno-exceptions -g0 -c $(srcdir)/crtstuff.c
	mv crtstuff$(objext) crtbeginS$(objext)
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
	  -DCRT_END -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
	  -fno-exceptions -g0 -c $(srcdir)/crtstuff.c -o crtendS$(objext)
	touch s-crtS

# Compile the start modules crt0.o and mcrt0.o that are linked with every program
crt0.o: s-crt0 ; @true
mcrt0.o: s-crt0; @true

s-crt0:	$(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
	  -o crt0.o -c $(CRT0_S)
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
	  -o mcrt0.o -c $(MCRT0_S)
	touch s-crt0
#\f
# Compiling object files from source files.

# Note that dependencies on obstack.h are not written
# because that file is not part of GCC.

# C language specific files.

c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h ggc.h \
    $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
	cd $(srcdir); $(BISON) $(BISONFLAGS) -d -o c-parse.c c-parse.y
$(srcdir)/c-parse.y: c-parse.in
	echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
	sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
	  -e "/^ifc$$/d" -e "/^end ifc$$/d" \
	  $(srcdir)/c-parse.in >>tmp-c-parse.y
	$(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y

$(srcdir)/c-gperf.h: c-parse.gperf
	gperf -L C -F ', 0, 0' -p -j1 -i 1 -g -o -t -G -N is_reserved_word \
	   -k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h || ( \
	echo "Please update your 'gperf' from the GCC infrastructure" >&2 ; \
	echo "	ftp://sourceware.cygnus.com/pub/egcs/infrastructure/gperf*" >&2 ; \
	exit 1 )
	 $(SHELL) $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h

c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
    c-lex.h flags.h function.h output.h toplev.h defaults.h
c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
    flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
    c-lex.h toplev.h output.h function.h
c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
    c-common.h $(srcdir)/c-parse.h $(srcdir)/c-gperf.h c-pragma.h input.h \
    intl.h flags.h toplev.h output.h mbchar.h ggc.h
c-aux-info.o : c-aux-info.c  $(CONFIG_H) system.h $(TREE_H) c-tree.h \
    c-common.h flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) function.h \
    defaults.h c-pragma.h toplev.h ggc.h
c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
    c-common.h flags.h toplev.h $(EXPR_H)
mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h
graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \
    function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H)

COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
	-rm -f collect2$(exeext)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(COLLECT2_OBJS) $(LIBS)

collect2.o : collect2.c $(CONFIG_H) system.h gstab.h intl.h \
	$(srcdir)/../include/obstack.h $(DEMANGLE_H) collect2.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES)  \
	-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
	-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`

tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h
hash.o: hash.c hash.h system.h toplev.h

vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h
	rm -f vfprintf.c
	$(LN_S) $(srcdir)/../libiberty/vfprintf.c vfprintf.c
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) vfprintf.c

splay-tree.o: $(srcdir)/../libiberty/splay-tree.c \
  $(srcdir)/../include/splay-tree.h $(srcdir)/../include/libiberty.h
	rm -f splay-tree.c
	$(LN_S) $(srcdir)/../libiberty/splay-tree.c splay-tree.c
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) splay-tree.c

underscore.c: s-under ; @true

s-under: $(GCC_PASSES)
	echo "int xxy_us_dummy;" >tmp-dum.c
	$(GCC_FOR_TARGET) -S tmp-dum.c
	echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
	if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \
	  echo "int prepends_underscore = 1;" >>tmp-under.c; \
	else \
	  echo "int prepends_underscore = 0;" >>tmp-under.c; \
	fi
	$(SHELL) $(srcdir)/move-if-change tmp-under.c underscore.c
	-rm -f tmp-dum.c tmp-dum.s
	touch s-under

# A file used by all variants of C.

c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
	c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) ggc.h

# Language-independent files.

DRIVER_DEFINES = \
  -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
  -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
  -DDEFAULT_TARGET_VERSION=\"$(version)\" \
  -DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
  -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\"
gcc.o: gcc.c $(CONFIG_H) system.h intl.h multilib.h \
    Makefile $(lang_specs_files) prefix.h gcc.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
  $(DRIVER_DEFINES) \
  -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`

gccspec.o: gccspec.c $(CONFIG_H) system.h gcc.h
cppspec.o: cppspec.c $(CONFIG_H) system.h gcc.h

tree-check.h: s-check ; @true
s-check : gencheck $(srcdir)/move-if-change
	./gencheck > tmp-check.h
	$(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h
	touch s-check

gencheck : gencheck.o $(lang_tree_files) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 gencheck.o $(HOST_LIBS)

gencheck.o : gencheck.c tree.def $(CONFIG_H) hconfig.h system.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
	  $(srcdir)/gencheck.c

dumpvers: dumpvers.c

version.o: version.c

ggc-common.o: ggc-common.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
	flags.h ggc.h varray.h hash.h

ggc-simple.o: ggc-simple.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
	ggc.h varray.h hash.h

ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
	ggc.h varray.h hash.h

ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) ggc.h

ggc-callbacks.o: ggc-callbacks.c $(CONFIG_H) $(RTL_H) $(TREE_H) ggc.h

obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H)
	rm -f obstack.c
	$(LN_S) $(srcdir)/../libiberty/obstack.c obstack.c
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) obstack.c

prefix.o: prefix.c $(CONFIG_H) system.h Makefile prefix.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	-DPREFIX=\"$(prefix)\" \
	  -c `echo $(srcdir)/prefix.c | sed 's,^\./,,'`

convert.o: convert.c $(CONFIG_H) system.h $(TREE_H) flags.h convert.h toplev.h

tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h \
   ggc.h
print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) ggc.h
stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
   function.h $(EXPR_H) $(RTL_H) toplev.h ggc.h
fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \
   $(RTL_H) ggc.h
toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) function.h \
   flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
   insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
   dwarf2out.h sdbout.h dbxout.h $(EXPR_H) $(BASIC_BLOCK_H) graph.h \
   $(lang_options_files)
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
	  -DTARGET_NAME=\"$(target_alias)\" \
	  -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`

rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h ggc.h

print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h basic-block.h
rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
errors.o : errors.c $(CONFIG_H) system.h errors.h

varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
   function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
   xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
   insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h ggc.h
stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h  \
   insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \
   loop.h $(RECOG_H) toplev.h output.h varray.h ggc.h
except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
   insn-config.h $(RECOG_H) output.h except.h toplev.h intl.h ggc.h
expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
   $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) \
   output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
   ggc.h
builtins.o : builtins.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   function.h $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h \
   $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
   except.h
calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
   insn-flags.h $(REGS_H) toplev.h output.h
expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h  \
   insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) real.h toplev.h
explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) insn-flags.h \
   insn-codes.h toplev.h
optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h  \
   insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h \
   toplev.h ggc.h
dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
   insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
   toplev.h
sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \
   function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) defaults.h real.h \
   insn-config.h $(srcdir)/../include/obstack.h xcoffout.h c-pragma.h \
   sdbout.h toplev.h
dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \
   flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \
   flags.h insn-config.h reload.h output.h defaults.h \
   hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h dyn-string.h
xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
   flags.h toplev.h output.h dbxout.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   function.h $(REGS_H) insn-config.h $(RECOG_H) real.h ggc.h \
   $(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h
real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
   integrate.h insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \
   intl.h function.h output.h $(RECOG_H) except.h toplev.h loop.h
jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
   insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
   toplev.h insn-attr.h
stupid.o : stupid.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
   $(BASIC_BLOCK_H) insn-config.h reload.h flags.h function.h toplev.h

cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
   real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h \
   $(srcdir)/../include/splay-tree.h
gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
   flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
   function.h output.h toplev.h
resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \
   $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h
lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
   real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \
   gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h function.h insn-config.h \
   ggc.h
loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h loop.h insn-config.h \
   insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
   function.h toplev.h varray.h
unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h function.h \
   integrate.h $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) loop.h toplev.h varray.h
flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h insn-config.h \
   $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h recog.h \
   insn-flags.h function.h
combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h function.h \
   insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \
   $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
   $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h \
   toplev.h function.h output.h ggc.h
local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
   $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
   output.h function.h insn-attr.h toplev.h
bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
   $(REGS_H)
global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h function.h \
   $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h
varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h
reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h $(EXPR_H) \
   reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h $(REGS_H) \
   function.h real.h toplev.h
reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h $(EXPR_H) \
   reload.h $(REGS_H) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
   $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h
caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \
   $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
   $(RECOG_H) reload.h $(EXPR_H) toplev.h
reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
   $(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h insn-flags.h \
   $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h
alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
   $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h
regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
   $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h function.h \
   $(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) \
   $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
   insn-attr.h toplev.h recog.h
final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \
   $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h function.h \
   real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
   xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
   dbxout.h
recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) function.h \
   $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
   insn-flags.h insn-codes.h real.h toplev.h output.h resource.h basic-block.h
reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) recog.h \
   $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
   varray.h function.h
dyn-string.o: dyn-string.c dyn-string.h $(CONFIG_H) system.h
lists.o: lists.c $(CONFIG_H) system.h toplev.h $(RTL_H) ggc.h

$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) ggc.h \
   $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
   insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)

# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)

mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h

mips-tdump: mips-tdump.o version.o $(LIBDEPS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)

mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) system.h

# Build file to support OSF/rose half-pic format.
halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) system.h

# Normally this target is not used; but it is used if you
# define ALLOCA=alloca.o.  In that case, you must get a suitable alloca.c
# from the GNU Emacs distribution.
alloca.o:	$(srcdir)/../libiberty/alloca.c
	rm -f alloca.c
	$(LN_S) $(srcdir)/../libiberty/alloca.c alloca.c
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
	  -c `echo alloca.c | sed 's,^\./,,'`
	$(ALLOCA_FINISH)
#\f
# Generate header and source files from the machine description,
# and compile them.

.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
  insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
  insn-attr.h insn-attrtab.c

# The following pair of rules has this effect:
# genconfig is run only if the md has changed since genconfig was last run;
# but the file insn-config.h is touched only when its contents actually change.

# Each of the other insn-* files is handled by a similar pair of rules.

# This causes an anomaly in the results of make -n
# because insn-* is older than s-*
# and thus make -n thinks that insn-* will be updated
# and force recompilation of things that depend on it.
# We use move-if-change precisely to avoid such recompilation.
# But there is no way to teach make -n that it will be avoided.

# Each of the insn-*.[ch] rules has a semicolon at the end,
# for otherwise the system Make on SunOS 4.1 never tries
# to recompile insn-*.o.  To avoid problems and extra noise from
# versions of make which don't like empty commands (nothing after the
# trailing `;'), we call true for each.

insn-config.h: s-config ; @true
s-config : $(md_file) genconfig $(srcdir)/move-if-change
	./genconfig $(md_file) > tmp-config.h
	$(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h
	touch s-config

insn-flags.h: s-flags ; @true
s-flags : $(md_file) genflags $(srcdir)/move-if-change
	./genflags $(md_file) > tmp-flags.h
	$(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
	touch s-flags

insn-codes.h: s-codes ; @true
s-codes : $(md_file) gencodes $(srcdir)/move-if-change
	./gencodes $(md_file) > tmp-codes.h
	$(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
	touch s-codes

insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \
  insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h function.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c

insn-emit.c: s-emit ; @true
s-emit : $(md_file) genemit $(srcdir)/move-if-change
	./genemit $(md_file) > tmp-emit.c
	$(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
	touch s-emit

insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \
  real.h output.h flags.h system.h function.h hard-reg-set.h resource.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c

insn-recog.c: s-recog ; @true
s-recog : $(md_file) genrecog $(srcdir)/move-if-change
	./genrecog $(md_file) > tmp-recog.c
	$(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
	touch s-recog

insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
  insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h system.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c

insn-opinit.c: s-opinit ; @true
s-opinit : $(md_file) genopinit $(srcdir)/move-if-change
	./genopinit $(md_file) > tmp-opinit.c
	$(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
	touch s-opinit

insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h toplev.h \
  insn-config.h recog.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c

insn-extract.c: s-extract ; @true
s-extract : $(md_file) genextract $(srcdir)/move-if-change
	./genextract $(md_file) > tmp-extract.c
	$(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
	touch s-extract

insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) $(REGS_H) output.h real.h \
	system.h insn-config.h recog.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c

insn-peep.c: s-peep ; @true
s-peep : $(md_file) genpeep $(srcdir)/move-if-change
	./genpeep $(md_file) > tmp-peep.c
	$(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
	touch s-peep

insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \
    output.h insn-attr.h insn-config.h system.h toplev.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c

insn-attr.h: s-attr ; @true
s-attr : $(md_file) genattr $(srcdir)/move-if-change
	./genattr $(md_file) > tmp-attr.h
	$(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
	touch s-attr

insn-attrtab.c: s-attrtab ; @true
s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
	./genattrtab $(md_file) > tmp-attrtab.c
	$(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
	touch s-attrtab

insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h conditions.h \
    hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h $(RECOG_H) \
    function.h insn-codes.h system.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c

insn-output.c: s-output ; @true
s-output : $(md_file) genoutput $(srcdir)/move-if-change
	./genoutput $(md_file) > tmp-output.c
	$(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
	touch s-output

genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h ggc.h
genrtl.c genrtl.h : s-genrtl
	@true	# force gnu make to recheck modification times.

s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H)
	./gengenrtl -h >tmp-genrtl.h
	$(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
	./gengenrtl >tmp-genrtl.c
	$(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
	touch s-genrtl
#\f
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
# since they need to run on this machine
# even if GCC is being compiled to run on some other machine.

# $(CONFIG_H) is omitted from the deps of the gen*.o
# because these programs don't really depend on anything
# about the target machine.  They do depend on config.h itself,
# since that describes the host machine.

# Pass the md file through cpp if the target requests it.
$(MD_FILE): $(MD_DEPS)
	rm -f $@
	$(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
	mv tmp-$@ $@

genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	  genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c

genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c

gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c

genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c

genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c

genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c

genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c

genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c

genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c

genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_RTLANAL) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_RTLANAL) $(HOST_LIBS)

genattrtab.o : genattrtab.c $(RTL_H)  $(build_xm_file) system.h errors.h ggc.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c

genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)

genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h errors.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c

gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
	 gengenrtl.o $(HOST_LIBS)

gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
#\f
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
	rm -f $(HOST_PREFIX)rtl.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c

$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H) \
	bitmap.h basic-block.h
	rm -f $(HOST_PREFIX)print-rtl.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c

$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \
  flags.h $(BASIC_BLOCK_H) $(REGS_H)
	rm -f $(HOST_PREFIX)bitmap.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c

$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
	rm -f $(HOST_PREFIX)rtlanal.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c

$(HOST_PREFIX_1)alloca.o: $(srcdir)/../libiberty/alloca.c
	rm -f $(HOST_PREFIX)alloca.c
	$(LN_S) $(srcdir)/../libiberty/alloca.c $(HOST_PREFIX)alloca.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c

$(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c
	rm -f $(HOST_PREFIX)obstack.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/obstack.c > $(HOST_PREFIX)obstack.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c

$(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c
	rm -f $(HOST_PREFIX)vfprintf.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/vfprintf.c > $(HOST_PREFIX)vfprintf.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c

$(HOST_PREFIX_1)doprint.o: doprint.c
	rm -f $(HOST_PREFIX)doprint.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c

$(HOST_PREFIX_1)malloc.o: malloc.c
	rm -f $(HOST_PREFIX)malloc.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c

$(HOST_PREFIX_1)errors.o: errors.c
	rm -f $(HOST_PREFIX)errors.c
	sed -e 's/config[.]h/hconfig.h/' $(srcdir)/errors.c > $(HOST_PREFIX)errors.c
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)errors.c


# This satisfies the dependency that we get if you cross-compile a compiler
# that does not need to compile alloca, malloc or whatever.
$(HOST_PREFIX_1):
	touch $(HOST_PREFIX_1)


#\f
# Remake internationalization support.

intl.o: intl.c intl.h gansidecl.h Makefile
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  -DLOCALEDIR=\"$(localedir)\" \
	  -c `echo $(srcdir)/intl.c | sed 's,^\./,,'`

# This is needed to when doing a partial build after a `make clean'.
# libintl.a does not depend on intl.all,
# as that would force a lot of recompiling.
$(top_builddir)/intl/libintl.a:
	@echo "$(MAKE) intl.all"
	@$(MAKE) $(FLAGS_TO_PASS) intl.all

# Make sure all the headers are there for xgettext to scan.
$(INTL_TARGETS): $(srcdir)/c-gperf.h \
    $(srcdir)/c-parse.c $(srcdir)/c-parse.h $(srcdir)/cexp.c

intl.all intl.install intl.uninstall intl.distdir \
  intl.mostlyclean intl.clean intl.distclean intl.maintainer-clean:
	@for d in $(INTL_SUBDIRS); do \
	  target=`expr $@ : 'intl.\(.*\)'` && \
	  echo "(cd $$d && $(MAKE) $$target)" && \
	  (cd $$d && AWK='$(AWK)' $(MAKE) $(SUBDIR_FLAGS_TO_PASS) $$target); \
	done

# intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
# but we need them for the `make extraclean' in distdir-finish.
intl.distdir-fixup:
	for d in $(INTL_SUBDIRS); do \
	  ln $$d/Makefile tmp/$$d || cp $$d/Makefile tmp/$$d || exit; \
	done
#\f
# Remake cpp and protoize.

# Making the preprocessor
cpp$(exeext): $(CCCP)$(exeext)
	-rm -f cpp$(exeext)
	$(LN) $(CCCP)$(exeext) cpp$(exeext)
CCCP_OBJS = cccp.o cexp.o intl.o prefix.o version.o @extra_cpp_objs@ mbchar.o
cccp$(exeext): $(CCCP_OBJS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CCCP_OBJS) $(LIBS)
cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h mbchar.h
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
	cd $(srcdir); $(BISON) -o cexp.c cexp.y

PREPROCESSOR_DEFINES = \
  -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
  -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
  -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
  -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
  -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
# We use $(libsubdir)/$(unlibsubdir) to match the
# -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
cccp.o: cccp.c $(CONFIG_H) intl.h pcp.h version.c config.status system.h \
           mbchar.h prefix.h Makefile.in
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  $(PREPROCESSOR_DEFINES) \
	  -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`

LIBCPP_OBJS =	cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
		cppinit.o cppulp.o prefix.o version.o mbchar.o @extra_cpp_objs@

# All the other archives built/used by this makefile are for targets.  This
# one is strictly for the host.
#
libcpp.a: $(LIBCPP_OBJS)
	$(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS)
	if $(RANLIB_TEST) ; then $(RANLIB) libcpp.a ; else true ; fi

cppmain$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cppmain$(exeext) cppmain.o \
	intl.o libcpp.a $(LIBS)

cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h system.h

cppulp.o:  cppulp.c  $(CONFIG_H) system.h output.h
cpplib.o:  cpplib.c  $(CONFIG_H) cpplib.h intl.h system.h cpphash.h
cpphash.o: cpphash.c $(CONFIG_H) cpplib.h intl.h system.h cpphash.h
cppalloc.o: cppalloc.c $(CONFIG_H) cpplib.h intl.h system.h
cpperror.o: cpperror.c $(CONFIG_H) cpplib.h intl.h system.h
cppexp.o:   cppexp.c   $(CONFIG_H) cpplib.h intl.h system.h cpphash.h
cppfiles.o: cppfiles.c $(CONFIG_H) cpplib.h intl.h system.h

cppinit.o:  cppinit.c $(CONFIG_H) cpplib.h intl.h system.h \
		cpphash.h prefix.h output.h Makefile
	$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  $(PREPROCESSOR_DEFINES) \
	  -c `echo $(srcdir)/cppinit.c | sed 's,^\./,,'`

# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).

proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X

PROTO_OBJS = intl.o version.o

protoize$(exeext): protoize.o $(PROTO_OBJS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ protoize.o $(PROTO_OBJS) $(LIBS)

unprotoize$(exeext): unprotoize.o $(PROTO_OBJS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ unprotoize.o $(PROTO_OBJS) $(LIBS)

protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) system.h \
   Makefile
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
	  $(srcdir)/protoize.c

unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \
   $(CONFIG_H) system.h Makefile
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
	  $(srcdir)/unprotoize.c

# This info describes the target machine, so compile with GCC just built.
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
   stmp-int-hdrs
	-rm -f SYSCALLS.c tmp-SYSCALLS.s
	cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
	-rm -f SYSCALLS.c tmp-SYSCALLS.s


test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES)
	-rm -f tmp-proto.[cso]
	cp $(srcdir)/protoize.c tmp-proto.c
	chmod u+w tmp-proto.c
	./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
	  $(GCC_CFLAGS) $(INCLUDES) \
	  -DGCC_INCLUDE_DIR=0 \
	  -DGPLUSPLUS_INCLUDE_DIR=0 \
	  -DCROSS_INCLUDE_DIR=0 \
	  -DTOOL_INCLUDE_DIR=0 \
	  -DSTANDARD_EXEC_PREFIX=0 \
	  -DDEFAULT_TARGET_MACHINE=0 \
	  -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
	@echo '**********' Expect 400 lines of differences.
	-diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff
	-wc -l tmp-proto.diff
	./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
	  $(GCC_CFLAGS) $(INCLUDES) \
	  -DGCC_INCLUDE_DIR=0 \
	  -DGPLUSPLUS_INCLUDE_DIR=0 \
	  -DCROSS_INCLUDE_DIR=0 \
	  -DTOOL_INCLUDE_DIR=0 \
	  -DSTANDARD_EXEC_PREFIX=0 \
	  -DDEFAULT_TARGET_MACHINE=0 \
	  -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
	@echo Expect zero differences.
	diff $(srcdir)/protoize.c tmp-proto.c | cat
	-rm -f tmp-proto.[cs] tmp-proto$(objext)

gcov.o: gcov.c gcov-io.h intl.h system.h

# Only one of 'gcov' or 'gcov.exe' is actually built, depending
# upon whether $(exeext) is empty or not.
GCOV_OBJS = gcov.o intl.o
gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@
#\f
# Build the include directory.  The stamp files are stmp-* rather than
# s-* so that mostlyclean does not force the include directory to
# be rebuilt.

# Build the include directory including float.h (which no longer depends upon
# enquire).
stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h
# Copy in the headers provided with gcc.
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
# The touch command is here to workaround an AIX/Linux NFS bug.
	for file in .. $(USER_H); do \
	  if [ X$$file != X.. ]; then \
	    realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
	    touch include/$$realfile; \
	    rm -f include/$$realfile; \
	    cp $$file include; \
	    chmod a+r include/$$realfile; \
	  fi; \
	done
	rm -f include/limits.h
	cp xlimits.h include/limits.h
	chmod a+r include/limits.h
	rm -f include/float.h
	if [ x$(FLOAT_H) != xMakefile.in ]; then \
	  cp $(srcdir)/config/$(FLOAT_H) include/float.h && \
	  chmod a+r include/float.h; \
	else :; fi
# Install the README
	rm -f include/README
	cp $(srcdir)/README-fixinc include/README
	chmod a+r include/README
	touch $@

# Now that float.h no longer depends upon enquire, this is actually a no-op.
stmp-headers:
	touch $@

FIXINCSRCDIR=$(srcdir)/fixinc
fixinc.sh: $(FIXINCSRCDIR)/mkfixinc.sh $(FIXINCSRCDIR)/fixincl.c \
	$(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/gnu-regex.c \
	$(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \
	$(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def
	MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
	export MAKE srcdir ; \
	cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target)

##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
##	rm -rf include
##	mkdir include
##	if [ x$(FIXINCLUDES) != xMakefile.in ]; \
##	then \
##	  for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
##	    if [ -d $$dir ]; \
##	    then \
##	      $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
##	    else true; fi; \
##	  done; \
##	  if [ x$(INSTALL_ASSERT_H) != x ] ; \
##	  then \
##	    rm -f include/assert.h; \
##	    cp $(srcdir)/assert.h include/assert.h; \
##	    chmod a+r include/assert.h; \
##	  fi \
##	else true; \
##	fi

# Build fixed copies of system files.
stmp-fixinc: fixinc.sh gsyslimits.h
	rm -rf include; mkdir include
	-chmod a+rx include
	TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \
	INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); SHELL=$(SHELL) ;\
	export TARGET_MACHINE srcdir INSTALL_ASSERT_H SHELL ; \
	$(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS)
	rm -f include/syslimits.h
	if [ -f include/limits.h ]; then \
	  mv include/limits.h include/syslimits.h; \
	else \
	  cp $(srcdir)/gsyslimits.h include/syslimits.h; \
	fi
	chmod a+r include/syslimits.h
# If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
# that directory exists, then make sure that $(libsubdir) exists.
# This is because cpp is compiled to find $(tooldir)/include via
# $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
# exists.
# We deliberately use tooldir instead of gcc_tooldir here.  gcc_tooldir
# won't work because libsubdir doesn't exist yet.
	if [ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
	   && [ -d $(tooldir)/sys-include ]; then \
	  if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi; \
	  if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib; fi; \
	  if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; fi; \
	  if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version) ; fi; \
	else true; fi
	touch stmp-fixinc

# Files related to the fixproto script.

deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
	if [ -d $(SYSTEM_HEADER_DIR) ]; \
	then \
	  CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
	  export CC; \
	  $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
	  mv tmp-deduced.h deduced.h; \
	else \
	  touch deduced.h; \
	fi

GEN_PROTOS_OBJS = gen-protos.o scan.o libcpp.a
gen-protos: $(GEN_PROTOS_OBJS) $(HOST_LIBDEPS)
	${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gen-protos \
	  $(GEN_PROTOS_OBJS) $(HOST_LIBS)

gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c

scan.o: scan.c scan.h $(build_xm_file) system.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c

xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
	cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
	mv tmp-fixtmp.c fixtmp.c
	$(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
	  | sed -e 's/	/ /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
	  | ./gen-protos >xsys-protos.hT
	mv xsys-protos.hT xsys-protos.h
	rm -rf fixtmp.c

fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
	    libcpp.a
	$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
	   scan-decls.o scan.o libcpp.a $(HOST_LIBS)

fix-header.o: fix-header.c $(srcdir)/../include/obstack.h scan.h \
	xsys-protos.h $(build_xm_file) system.h cpplib.h cpphash.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c

scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file) system.h
	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c

# stmp-fixproto depends on this, not on fix-header directly.
# The idea is to make sure fix-header gets built,
# but not rerun fixproto after each stage
# just because fix-header's mtime has changed.
fixhdr.ready: fix-header
	-if [ -f fixhdr.ready ] ; then \
		true; \
	else \
		touch fixhdr.ready; \
	fi

# stmp-headers is to make sure fixincludes has already finished.
# The if statement is so that we don't run fixproto a second time
# if it has already been run on the files in `include'.
stmp-fixproto: fixhdr.ready fixproto stmp-headers
	@echo "Various warnings and error messages from fixproto are normal"
	-if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
	-if [ -f include/fixed ] ; then true; \
	else \
	  : This line works around a 'make' bug in BSDI 1.1.; \
	  FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
	  mkinstalldirs="$(SHELL) $(srcdir)/mkinstalldirs"; \
	    export mkinstalldirs; \
	  if [ -d $(SYSTEM_HEADER_DIR) ] ; then \
	    $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
	  else true; fi; \
	  touch include/fixed; \
	fi
	touch stmp-fixproto
#\f
# Remake the info files.

doc: info
info: cpp.info gcc.info lang.info

cpp.info: $(srcdir)/cpp.texi
	$(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi

gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
	  $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
	  $(srcdir)/tm.texi $(srcdir)/gcov.texi
	$(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi

dvi: gcc.dvi cpp.dvi lang.dvi

# This works with GNU Make's default rule.
gcc.dvi: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
	 $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
	 $(srcdir)/tm.texi $(srcdir)/gcov.texi
	TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
	texindex gcc.??
	TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi

cpp.dvi: $(srcdir)/cpp.texi
	TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
	texindex cpp.??
	TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi


INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
	cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \
		--no-split -o INSTALL install1.texi
#\f
# Deletion of files made during compilation.
# There are four levels of this:
#   `mostlyclean', `clean', `distclean' and `maintainer-clean'.
# `mostlyclean' is useful while working on a particular type of machine.
# It deletes most, but not all, of the files made by compilation.
# It does not delete libgcc.a or its parts, so it won't have to be recompiled.
# `clean' deletes everything made by running `make all'.
# `distclean' also deletes the files made by config.
# `maintainer-clean' also deletes everything that could be regenerated
# automatically, except for `configure'.
# We remove as much from the language subdirectories as we can
# (less duplicated code).

INTL_MOSTLYCLEAN = intl.mostlyclean
mostlyclean: $(INTL_MOSTLYCLEAN) lang.mostlyclean
	-rm -f $(STAGESTUFF)
# Delete the temporary source copies for cross compilation.
	-rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
	-rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
	-rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
	-rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test
	for name in $(LIB1FUNCS); do rm -f $${name}.c; done
# Delete other built files.
	-rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
# Delete the stamp and temporary files.
	-rm -f s-* tmp-* stamp-* stmp-*
	-rm -f */stamp-* */tmp-*
# Delete debugging dump files.
	-rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
	-rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.addressof
	-rm -f *.regmove *.mach *.bp *.gcse *.flow2 *.peephole2
	-rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
	-rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
	-rm -f */*.sched2 */*.stack */*.regmove */*.gcse */*.flow2
	-rm -f */*.peephole2
# Delete some files made during installation.
	-rm -f specs float.h-* enquire SYSCALLS.c.X SYSCALLS.c
	-rm -f collect collect2 mips-tfile mips-tdump alloca.s
# Delete files generated for fixproto
	-rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
	  gen-protos fixproto.list fixtmp.* fixhdr.ready
# Delete unwanted output files from TeX.
	-rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
	-rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
# Delete sorted indices we don't actually use.
	-rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
# Delete core dumps.
	-rm -f core */core
	-rm -f *.bp */*.bp

# Delete all files made by compilation
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
# It may not be quite desirable to delete unprotoize.c here,
# but the spec for `make clean' requires it.
# Using unprotoize.c is not quite right in the first place,
# but what better way is there?
	-rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
	-rm -f libgcc1.null
	-rm -f *.dvi
	-rm -f */*.dvi
	-if [ -f md.pre-cpp ]; then \
	  rm -f md ; \
	fi
# Delete the include directory.
	-rm -rf include
# Delete files used by the "multilib" facility (including libgcc subdirs).
	-rm -f multilib.h tmpmultilib*
	-if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
	  rm -rf $(MULTILIB_DIRNAMES); \
	else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
	  rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
	fi ; fi
	-rm -fr stage1 stage2 stage3 stage4

# Delete all files that users would normally create
# while building and installing GCC.
INTL_DISTCLEAN = intl.distclean
distclean: clean $(INTL_DISTCLEAN) lang.distclean
	-rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
	-rm -f md cstamp-h
	-rm -f config.status config.run config.cache config.bak
	-rm -f Make-lang Make-hooks Make-host Make-target
	-rm -f Makefile specs.h options.h gencheck.h *.oaux
	-rm -f gthr-default.h
	-rm -f */stage1 */stage2 */stage3 */stage4 */include
	-rm -f c-parse.output
	-rm -f *.asm
	-rm -f float.h
	-rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
	-rm -f testsuite/{gcc,g++}.{log,sum}
	-rm -f intl/libintl.h libintl.h

# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
extraclean: distclean lang.extraclean
	-rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
	-rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
	-rm -f config/*/=* config/*/"#"* config/*/*~*
	-rm -f config/*/*.orig config/*/*.rej
	-rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
	-rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
	-rm -f *lose config/*lose config/*/*lose
	-rm -f *.s *.s[0-9] *.i config/ChangeLog
	-rm -f y.tab.c yacc.*
	-rm -f */=* */"#"* */*~*
	-rm -f */patch* */*.orig */*.rej
	-rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
	-rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs
	-rm -f */*lose */*.s */*.s[0-9] */*.i

# Get rid of every file that's generated from some other file, except for `configure'.
# Most of these files ARE PRESENT in the GCC distribution.
# We define INTL_DISTCLEAN, INTL_CLEAN & INTL_MOSTLYCLEAN to be empty in the
# submake, so that we don't descend into intl after its makefile has been
# removed.
maintainer-clean:
	@echo 'This command is intended for maintainers to use; it'
	@echo 'deletes files that may need special tools to rebuild.'
	$(MAKE) INTL_DISTCLEAN= INTL_CLEAN= INTL_MOSTLYCLEAN= \
		intl.maintainer-clean lang.maintainer-clean distclean
	-rm -f c-parse.y c-gperf.h
	-rm -f c-parse.c c-parse.h c-parse.output
	-rm -f cexp.c cexp.output TAGS
	-rm -f cpp.info* cpp.??s cpp.*aux
	-rm -f gcc.info* gcc.??s gcc.*aux
#\f
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.

# The semicolon is to prevent the install.sh -> install default rule
# from doing anything.  Having it run true helps avoid problems and
# noise from versions of make which don't like to have null commands.
install: $(INSTALL_TARGET) ; @true

# Copy the compiler files into directories where they will be run.
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
    $(INSTALL_CPP) install-man install-info intl.install lang.install-normal \
    install-driver

# Do nothing while making gcc with a cross-compiler. The person who
# makes gcc for the target machine has to know how to put a complete
# gcc together by hand.
install-build: force
	@echo You have to install gcc on your target machine by hand.

# Run this on the target machine
# to finish installation of cross compiler.
# This is not used anymore now that float.h does not depend on enquire.
install-cross-rest: install-float-h-cross

# Handle cpp installation.
install-cpp: xcpp$(exeext)
	-rm -f $(bindir)/$(CPP_INSTALL_NAME)$(exeext)
	$(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(bindir)/$(CPP_INSTALL_NAME)$(exeext)
	if [ x$(cpp_install_dir) != x ]; then \
	  rm -f $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
	  $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
	else true; fi

uninstall-cpp:
	-rm -f $(bindir)/cpp
	-if [ x$(cpp_install_dir) != x ]; then \
	  rm -f $(prefix)/$(cpp_install_dir)/cpp; \
	else true; fi

# Install float.h for cross compiler.
# Run this on the target machine!
# This is not used anymore now that float.h does not depend on enquire.
install-float-h-cross: installdirs
#	if [ -f enquire ] ; then true; else false; fi
# Note: don't use -.  We should fail right away if enquire was not made.
	./enquire -f > $(tmpdir)/float.h
	-rm -f $(libsubdir)/include/float.h
	$(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h
	-rm -f $(tmpdir)/float.h
	chmod a-x $(libsubdir)/include/float.h

# Create the installation directories.
installdirs:
	-if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; chmod a+rx $(prefix) ; fi
	-if [ -d $(exec_prefix) ] ; then true ; else mkdir $(exec_prefix) ; chmod a+rx $(exec_prefix) ; fi
	-if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
	-if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
# This dir isn't currently searched by cpp.
#	-if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
	-fdir= ; for dir in `echo $(libsubdir) | tr '/' ' '`; do \
	  fdir=$${fdir}/$${dir}; \
	  if [ -d $${fdir} ] ; then true ; else mkdir $${fdir}; chmod a+rx $${fdir}; fi ; \
	done
	-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
	-if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
	-if [ -d $(gcc_tooldir) ] ; then true ; else mkdir $(gcc_tooldir) ; chmod a+rx $(gcc_tooldir) ; fi
	-if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi
	-if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
# We don't use mkdir -p to create the parents of man1dir,
# because some systems don't support it.
# Instead, we use this technique to create the immediate parent of man1dir.
	-parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
	if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
	-if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; chmod a+rx $(man1dir) ; fi

# Install the compiler executables built during cross compilation.
install-common: native installdirs $(EXTRA_PARTS) lang.install-common
	for file in $(COMPILERS); do \
	  if [ -f $$file ] ; then \
	    rm -f $(libsubdir)/$$file; \
	    $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
	  else true; \
	  fi; \
	done
	for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
	  if [ x"$$file" != x.. ]; then \
	    rm -f $(libsubdir)/$$file; \
	    $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
	  else true; fi; \
	done
	for file in $(EXTRA_PARTS) ..; do \
	  if [ x"$$file" != x.. ]; then \
	    rm -f $(libsubdir)/$$file; \
	    $(INSTALL_DATA) $$file $(libsubdir)/$$file; \
	    chmod a-x $(libsubdir)/$$file; \
	  else true; fi; \
	done
# Don't mess with specs if it doesn't exist yet.
	-if [ -f specs ] ; then \
	  rm -f $(libsubdir)/specs; \
	  $(INSTALL_DATA) specs $(libsubdir)/specs; \
	  chmod a-x $(libsubdir)/specs; \
	fi
# Install protoize if it was compiled.
	-if [ -f protoize$(exeext) ]; \
	then \
	    if [ -f gcc-cross$(exeext) ] ; then \
		rm -f $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
		$(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
		rm -f $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
		$(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
	    else \
		rm -f $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
		$(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
		rm -f $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
		$(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
	    fi ; \
	    rm -f $(libsubdir)/SYSCALLS.c.X; \
	    $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
	    chmod a-x $(libsubdir)/SYSCALLS.c.X; \
	fi
	-rm -f $(libsubdir)/cpp$(exeext)
	$(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
# Install gcov if it was compiled.
	-if [ -f gcov$(exeext) ]; \
	then \
	    rm -f $(bindir)/gcov$(exeext); \
	    $(INSTALL_PROGRAM) gcov$(exeext) $(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
	fi

# Install the driver program as $(target_alias)-gcc
# and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
install-driver: xgcc$(exeext)
	-if [ -f gcc-cross$(exeext) ] ; then \
	  rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
	  $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
	  if [ -d $(gcc_tooldir)/bin/. ] ; then \
	    rm -f $(gcc_tooldir)/bin/gcc$(exeext); \
	    $(INSTALL_PROGRAM) gcc-cross$(exeext) $(gcc_tooldir)/bin/gcc$(exeext); \
	  else true; fi; \
	else \
	  rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
	  $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
	  rm -f $(bindir)/$(target_alias)-gcc-1$(exeext); \
	  $(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext); \
	  mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(target_alias)-gcc$(exeext); \
	fi

# Install the info files.
# $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
# to do the install.
install-info: doc installdirs lang.install-info
	-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
	for f in cpp.info* gcc.info*; do \
	    $(INSTALL_DATA) $$f $(infodir)/$$f; \
	done
	-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
	  if [ -f $(infodir)/dir ] ; then \
	    for f in cpp.info gcc.info; do \
		install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
	    done; \
	  else true; fi; \
	else true; fi;
	-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*

# Install the man pages.
install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
	-if [ -f gcc-cross$(exeext) ] ; then \
	  rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
	  $(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
	  chmod a-x $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
	else \
	  rm -f $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
	  $(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
	  chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
	fi
	-rm -f $(man1dir)/cccp$(manext)
	-$(INSTALL_DATA) $(srcdir)/cccp.1 $(man1dir)/cccp$(manext)
	-chmod a-x $(man1dir)/cccp$(manext)

# Install the library.
install-libgcc: libgcc.a installdirs
	-if [ -f libgcc.a ] ; then \
	  rm -f $(libsubdir)/libgcc.a; \
	  $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
	  if $(RANLIB_TEST_FOR_TARGET) ; then \
	    (cd $(libsubdir); $(RANLIB_FOR_TARGET) libgcc.a); else true; fi; \
	  chmod a-x $(libsubdir)/libgcc.a; \
	else true; fi

# Install multiple versions of libgcc.a.
install-multilib: stmp-multilib installdirs
	for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
	  dir=`echo $$i | sed -e 's/;.*$$//'`; \
	  if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; chmod a+rx $(libsubdir)/$${dir}; fi; \
	  for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \
	    rm -f $(libsubdir)/$${dir}/$${f}; \
	    $(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \
	  done; \
	  if $(RANLIB_TEST_FOR_TARGET); then \
	    (cd $(libsubdir)/$${dir}; $(RANLIB_FOR_TARGET) libgcc.a); \
	  else true; fi; \
	  chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
	done

# Install all the header files built in the include subdirectory.
install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
# Don't need to use LN_S here since we really do need ln -s and no substitutes.
	-files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
	if [ $$? -eq 0 ]; then \
	  dir=`cd include; pwd`; \
	  for i in $$files; do \
	    dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
	    if expr "$$dest" : "$$dir.*" > /dev/null; then \
	      rm -f $(libsubdir)/include/$$i; \
	      ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
	    fi; \
	  done; \
	fi

# Create or recreate the gcc private include file directory.
install-include-dir: installdirs
	-rm -rf $(libsubdir)/include
	mkdir $(libsubdir)/include
	-chmod a+rx $(libsubdir)/include

# Install the include directory using tar.
install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir
# We use `pwd`/include instead of just include to problems with CDPATH
# Unless a full pathname is provided, some shells would print the new CWD,
# found in CDPATH, corrupting the output.  We could just redirect the
# output of `cd', but some shells lose on redirection within `()'s
	(cd `pwd`/include ; \
	 tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar xpf - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.

# Install the include directory using cpio.
install-headers-cpio: stmp-headers $(STMP_FIXPROTO) install-include-dir
# See discussion about the use of `pwd` above
	cd `pwd`/include ; \
	find . -print | cpio -pdum $(libsubdir)/include

# Put assert.h where it won't override GNU libc's assert.h.
# It goes in a dir that is searched after GNU libc's headers;
# thus, the following conditionals are no longer needed.
# But it's not worth deleting them now.
## Don't replace the assert.h already there if it is not from GCC.
## This code would be simpler if it tested for -f ... && ! grep ...
## but supposedly the ! operator is missing in sh on some systems.
install-assert-h: assert.h installdirs
	if [ -f $(assertdir)/assert.h ]; \
	then \
	  if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
	    then \
	    rm -f $(assertdir)/assert.h; \
	    $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
	    chmod a-x $(assertdir)/assert.h; \
	  else true; \
	  fi; \
	else \
	  rm -f $(assertdir)/assert.h; \
	  $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
	  chmod a-x $(assertdir)/assert.h; \
	fi

# Use this target to install the program `collect2' under the name `collect2'.
install-collect2: collect2 installdirs
	$(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext)
# Install the driver program as $(libsubdir)/gcc for collect2.
	$(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)

# Cancel installation by deleting the installed files.
uninstall: intl.uninstall lang.uninstall $(UNINSTALL_CPP)
	-rm -rf $(libsubdir)
	-rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext)
	-rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext)
	-rm -rf $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext)
	-rm -rf $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext)
	-rm -rf $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
	-rm -rf $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext)
	-rm -rf $(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
	-rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(manext)
	-rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(manext)
	-rm -rf $(man1dir)/cccp$(manext)
	-rm -rf $(man1dir)/protoize$(manext)
	-rm -rf $(man1dir)/unprotoize$(manext)
	-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
#\f
# These targets are for the dejagnu testsuites. The file site.exp
# contains global variables that all the testsuites will use.

# Set to $(target_alias)/ for cross.
target_subdir = @target_subdir@

site.exp: ./config.status Makefile
	@echo "Making a new config file..."
	-@rm -f ./tmp?
	@touch site.exp
	-@mv site.exp site.bak
	@echo "## these variables are automatically generated by make ##" > ./tmp0
	@echo "# Do not edit here. If you wish to override these values" >> ./tmp0
	@echo "# add them to the last section" >> ./tmp0
	@echo "set rootme \"`pwd`\"" >> ./tmp0
	@echo "set srcdir \"`cd ${srcdir}; pwd`\"" >> ./tmp0
	@echo "set host_triplet $(host_canonical)" >> ./tmp0
	@echo "set build_triplet $(build_canonical)" >> ./tmp0
	@echo "set target_triplet $(target)" >> ./tmp0
	@echo "set target_alias $(target_alias)" >> ./tmp0
# CFLAGS is set even though it's empty to show we reserve the right to set it.
	@echo "set CFLAGS \"\"" >> ./tmp0
	@echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0
# If newlib has been configured, we need to pass -B to gcc so it can find
# newlib's crt0.o if it exists.  This will cause a "path prefix not used"
# message if it doesn't, but the testsuite is supposed to ignore the message -
# it's too difficult to tell when to and when not to pass -B (not all targets
# have crt0's).  We could only add the -B if ../newlib/crt0.o exists, but that
# seems like too selective a test.
# ??? Another way to solve this might be to rely on linker scripts.  Then
# theoretically the -B won't be needed.
# We also need to pass -L ../ld so that the linker can find ldscripts.
	@if [ -d $(objdir)/../$(target_subdir)newlib ] ; then \
	  echo "set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> ./tmp0; \
	  echo "set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> ./tmp0; \
	  echo "append CFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
	  echo "append CXXFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
	  echo "append LDFLAGS \" \$$newlib_ldflags\"" >> ./tmp0; \
	else true; \
	fi
	@if [ -d $(objdir)/../ld ] ; then \
	  echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \
	else true; \
	fi
	echo "set tmpdir $(objdir)/testsuite" >> ./tmp0
	@echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0
	@echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
	@cat ./tmp0 > site.exp
	@cat site.bak | sed \
		-e '1,/^## All variables above are.*##/ d' >> site.exp
	-@rm -f ./tmp?

CHECK_TARGETS = check-gcc check-g++ check-g77 check-objc

check: $(CHECK_TARGETS)

testsuite/site.exp: site.exp
	if [ -d testsuite ]; then \
	  true; \
	else \
	  mkdir testsuite; \
	fi
	rm -rf testsuite/site.exp
	cp site.exp testsuite/site.exp

check-g++: testsuite/site.exp
	-rootme=`pwd`; export rootme; \
	srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
	cd testsuite; \
	EXPECT=${EXPECT} ; export EXPECT ; \
	if [ -f $${rootme}/../expect/expect ] ; then  \
	   TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
	    export TCL_LIBRARY ; fi ; \
	$(RUNTEST) --tool g++ $(RUNTESTFLAGS)

check-gcc: testsuite/site.exp
	-rootme=`pwd`; export rootme; \
	srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
	cd testsuite; \
	EXPECT=${EXPECT} ; export EXPECT ; \
	if [ -f $${rootme}/../expect/expect ] ; then  \
	   TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
	   export TCL_LIBRARY ; fi ; \
	$(RUNTEST) --tool gcc $(RUNTESTFLAGS)

check-g77: testsuite/site.exp
	-rootme=`pwd`; export rootme; \
	srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
	cd testsuite; \
	EXPECT=${EXPECT} ; export EXPECT ; \
	if [ -f $${rootme}/../expect/expect ] ; then  \
	   TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
	   export TCL_LIBRARY ; fi ; \
	$(RUNTEST) --tool g77 $(RUNTESTFLAGS)

check-objc: testsuite/site.exp
	-rootme=`pwd`; export rootme; \
	srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
	cd testsuite; \
	EXPECT=${EXPECT} ; export EXPECT ; \
	if [ -f $${rootme}/../expect/expect ] ; then  \
	   TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
	    export TCL_LIBRARY ; fi ; \
	$(RUNTEST) --tool objc $(RUNTESTFLAGS)

# These exist for maintenance purposes.

# Update the tags table.
TAGS: force
	cd $(srcdir);							\
	mkdir tmp-tags;							\
	mv -f c-parse.[ch] cexp.c =*.[chy] tmp-tags;			\
	etags *.y *.h *.c;						\
	mv tmp-tags/* .;						\
	rmdir tmp-tags

# Create the distribution tar.gz file.
dist: tmp-gcc.xtar
	gzip --best < tmp-gcc.xtar > tmp-gcc.xtar.gz
	mv tmp-gcc.xtar.gz gcc-$(version).tar.gz

tmp-gcc.xtar: distdir
# Make the distribution.
	tar -chf tmp-gcc.xtar gcc-$(version)

distdir-cvs: force
	if [ -d $(srcdir)/CVS ]; then cd $(srcdir) && cvs -r update; fi

# This target exists to do the initial work before the language specific
# stuff gets done.
distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
  $(srcdir)/c-parse.c $(srcdir)/cexp.c $(srcdir)/config.in \
  $(srcdir)/version.c TAGS
	@case '$(USE_NLS)' in \
	yes) ;; \
	*) echo "configure with --enable-nls before making a distribution"; \
	   exit 1;; \
	esac
	@if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
	then true; \
	else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
	fi
# Update the version number in README
	$(AWK) '$$1 " " $$2 " " $$3 == "This directory contains" \
		{ $$6 = version; print $$0 } \
	     $$1 " " $$2 " " $$3 != "This directory contains"' \
	  version=$(version) $(srcdir)/README > tmp.README
	mv tmp.README README
	-rm -rf gcc-$(version) tmp
# Put all the files in a temporary subdirectory
# which has the name that we want to have in the tar file.
	mkdir tmp
	mkdir tmp/config
	mkdir tmp/ginclude
	mkdir tmp/objc
	mkdir tmp/intl
	mkdir tmp/po
	for file in `(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
	  test -f $(srcdir)/$$file && $(LN_S) $(srcdir)/$$file tmp; \
	done
	if test "$(srcdir)" != "." ; then \
	  for file in c-parse.c cexp.c ; do \
	    test -f ./$$file && $(LN_S) ../$$file tmp; \
	  done; \
	fi
	for file in `(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
	  if test -d $(srcdir)/config/$$file \
	      && test "$$file" != RCS && test "$$file" != CVS; then \
	    mkdir tmp/config/$$file; \
	    for subfile in `(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
	      $(LN_S) $(srcdir)/config/$$file/$$subfile tmp/config/$$file; \
	    done; \
	  else \
	    $(LN_S) $(srcdir)/config/$$file tmp/config; \
	  fi; \
	done
	for file in `(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
	  $(LN_S) $(srcdir)/ginclude/$$file tmp/ginclude; \
	done
	for file in `(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
	  $(LN_S) $(srcdir)/objc/$$file tmp/objc; \
	done
	$(LN_S) .gdbinit tmp

# Finish making `distdir', after the languages have done their thing.
distdir-finish:
	mv tmp gcc-$(version)
# Get rid of everything we don't want in the distribution.  We'd want
# this to use Makefile.in, but it doesn't have the `lang.foo' targets
# expanded.
	cd gcc-$(version); make extraclean distdir-check VERSION_DEP=

distdir-check:
	($(AWK) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' | sort) \
	  < po/POTFILES.in > tmp.POTFILES
	ls [A-Za-z]*.[ch] [a-z]*/[A-Za-z]*.[ch] \
	  [a-z]*/[a-z]*/[A-Za-z]*.[ch] | sort > tmp.src
	diff tmp.POTFILES tmp.src || { \
	  echo "po/POTFILES.in and sources do not match -- please fix"; \
	  exit 1; \
	}
	rm -f tmp.*

distdir: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
  lang.distdir distdir-finish

# make diff oldversion=M.N
# creates a diff file between an older distribution and this one.
# The -P option assumes this is GNU diff.
diff:
	diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
	  -x cexp.c -x -x TAGS -x INSTALL \
	  -x configure -x config.in \
	  -x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
	  -x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
	  $(LANG_DIFF_EXCLUDES) \
	  gcc-$(oldversion) gcc-$(version) > gcc-$(oldversion)-$(version).diff

bootstrap bootstrap-lean: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
	$(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
	$(MAKE) stage1
# This used to define ALLOCA as empty, but that would lead to bad results
# for a subsequent `make install' since that would not have ALLOCA empty.
# To prevent `make install' from compiling alloca.o and then relinking cc1
# because alloca.o is newer, we permit these recursive makes to compile
# alloca.o.  Then cc1 is newer, so it won't have to be relinked.
	$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
	$(MAKE) stage2
	-if test $@ = bootstrap-lean; then rm -rf stage1; else true; fi
	$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"

bootstrap2 bootstrap2-lean: force
	$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
	$(MAKE) stage2
	-if test $@ = bootstrap2-lean; then rm -rf stage1; else true; fi
	$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"

bootstrap3 bootstrap3-lean: force
	$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"

bootstrap4 bootstrap4-lean: force
	$(MAKE) CC="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"

# Compare the object files in the current directory with those in the
# stage2 directory.

# ./ avoids bug in some versions of tail.
compare compare3 compare4 compare-lean compare3-lean compare4-lean: force
	-rm -f .bad_compare
	case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	for file in *$(objext); do \
	  tail +16c ./$$file > tmp-foo1; \
	  tail +16c stage$$stage/$$file > tmp-foo2 \
	    && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
	done
	case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	for dir in tmp-foo intl $(SUBDIRS); do \
	  if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
	    for file in $$dir/*$(objext); do \
	      tail +16c ./$$file > tmp-foo1; \
	      tail +16c stage$$stage/$$file > tmp-foo2 \
	        && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
	    done; \
	  else true; fi; \
	done
	-rm -f tmp-foo*
	case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	if [ -f .bad_compare ]; then \
	  echo "Bootstrap comparison failure!"; \
	  cat .bad_compare; \
	  exit 1; \
	else \
	  case "$@" in \
	    *-lean ) rm -rf stage$$stage ;; \
	    *) ;; \
	  esac; true; \
	fi

# Compare the object files in the current directory with those in the
# stage2 directory.  Use gnu cmp (diffutils v2.4 or later) to avoid
# running tail and the overhead of twice copying each object file.

gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
	-rm -f .bad_compare
	case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	for file in *$(objext); do \
	  (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
	done
	case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	for dir in tmp-foo intl $(SUBDIRS); do \
	  if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
	    for file in $$dir/*$(objext); do \
	      (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
	    done; \
	  else true; fi; \
	done
	case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
	if [ -f .bad_compare ]; then \
	  echo "Bootstrap comparison failure!"; \
	  cat .bad_compare; \
	  exit 1; \
	else \
	  case "$@" in \
	    *-lean ) rm -rf stage$$stage ;; \
	  esac; true; \
	fi

# Copy the object files from a particular stage into a subdirectory.
stage1-start:
	-if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
	-for dir in intl $(SUBDIRS) ; \
	 do \
	   if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
	 done
	-mv $(STAGESTUFF) stage1
	-mv intl/*$(objext) stage1/intl
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
	-if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage1 ; else true ; fi
	-if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage1 ; else true ; fi
	-if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage1 ; else true ; fi
	-rm -f stage1/libgcc.a
	-cp libgcc.a stage1
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) stage1/libgcc.a; \
	else true; fi
	-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
	  cp stage1/$${f} . ; \
	else true; \
	fi; done
stage1: force stage1-start lang.stage1

stage2-start:
	-if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
	-for dir in intl $(SUBDIRS) ; \
	 do \
	   if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
	 done
	-mv $(STAGESTUFF) stage2
	-mv intl/*$(objext) stage2/intl
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
	-if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage2 ; else true ; fi
	-if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage2 ; else true ; fi
	-if [ -f collect-ld ] ; then $(LN_S) ../collect-ld$(exeext) stage2 ; else true ; fi
	-rm -f stage2/libgcc.a
	-cp libgcc.a stage2
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) stage2/libgcc.a; \
	else true; fi
	-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
	  cp stage2/$${f} . ; \
	else true; \
	fi; done
stage2: force stage2-start lang.stage2

stage3-start:
	-if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
	-for dir in intl $(SUBDIRS) ; \
	 do \
	   if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
	 done
	-mv $(STAGESTUFF) stage3
	-mv intl/*$(objext) stage3/intl
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
	-if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage3 ; else true ; fi
	-if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage3 ; else true ; fi
	-if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage3 ; else true ; fi
	-rm -f stage3/libgcc.a
	-cp libgcc.a stage3
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) stage3/libgcc.a; \
	else true; fi
	-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
	  cp stage3/$${f} . ; \
	else true; \
	fi; done
stage3: force stage3-start lang.stage3

stage4-start:
	-if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
	-for dir in intl $(SUBDIRS) ; \
	 do \
	   if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
	 done
	-mv $(STAGESTUFF) stage4
	-mv intl/*$(objext) stage4/intl
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
	-if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage4 ; else true ; fi
	-if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage4 ; else true ; fi
	-if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage4 ; else true ; fi
	-rm -f stage4/libgcc.a
	-cp libgcc.a stage4
	-if $(RANLIB_TEST_FOR_TARGET) ; then \
	  $(RANLIB_FOR_TARGET) stage4/libgcc.a; \
	else true; fi
	-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
	  cp stage4/$${f} . ; \
	else true; \
	fi; done
stage4: force stage4-start lang.stage4

# Copy just the executable files from a particular stage into a subdirectory,
# and delete the object files.  Use this if you're just verifying a version
# that is pretty sure to work, and you are short of disk space.
risky-stage1: stage1
	-make clean

risky-stage2: stage2
	-make clean

risky-stage3: stage3
	-make clean

risky-stage4: stage4
	-make clean

#In GNU Make, ignore whether `stage*' exists.
.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4

force:

# ---
# The enquire rules are still useful for building new float-anything.h.
# Special flags for compiling enquire.
# We disable optimization to make floating point more reliable.
ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
ENQUIRE_LDFLAGS = $(LDFLAGS)

# Enquire target (This is a variable so that a target can choose not to
# build it.)
ENQUIRE = enquire

# Test to see whether <float.h> exists in the system header files,
# and is not derived from GCC.
FLOAT_H_TEST = \
  [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \
  if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \
  then false; \
  else :; fi
# We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
# to ensure, we're emitting a full blown <float.h> ourselves.
FLOAT_H_TEST = false

# Used to compile enquire with standard cc, but have forgotten why.
# Let's try with GCC.
enquire: enquire.o $(GCC_PARTS)
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
	if $(FLOAT_H_TEST); then \
	  rm -f include/float.h; \
	  SYS_FLOAT_H_WRAP=1; \
	else :; \
	  SYS_FLOAT_H_WRAP=0; \
	fi; \
	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \
	  -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \
	  -I. -c $(srcdir)/enquire.c

# Create float.h source for the native machine.
# Make it empty if we can use the system float.h without changes.
float.h-nat: enquire
	-./enquire -f > tmp-float.h
	grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h
	mv tmp-float.h float.h-nat

# Create a dummy float.h source for a cross-compiler.
# ??? This isn't used anymore.  Should we create config/float-unkn.h
# and make that the default float_format in configure?
float.h-cross:
	echo "#ifndef	__GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
	echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
	echo "#endif" >> t-float.h-cross
	mv t-float.h-cross float.h-cross