]>
Commit | Line | Data |
---|---|---|
32e6d418 | 1 | # Makefile for GNU C compiler. |
90c04b70 | 2 | # Copyright (C) 1987, 1988, 1990, 1991, 1992 Free Software Foundation, Inc. |
32e6d418 | 3 | |
4 | #This file is part of GNU CC. | |
5 | ||
6 | #GNU CC is free software; you can redistribute it and/or modify | |
7 | #it under the terms of the GNU General Public License as published by | |
8 | #the Free Software Foundation; either version 2, or (at your option) | |
9 | #any later version. | |
10 | ||
11 | #GNU CC is distributed in the hope that it will be useful, | |
12 | #but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | #GNU General Public License for more details. | |
15 | ||
16 | #You should have received a copy of the GNU General Public License | |
17 | #along with GNU CC; see the file COPYING. If not, write to | |
18 | #the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
19 | ||
20 | # The targets for external use include: | |
21 | # all, doc, proto, install, install-cross, install-cross-rest, | |
c6396a0b | 22 | # uninstall, TAGS, mostlyclean, clean, distclean, realclean, |
32e6d418 | 23 | # stage1, stage2, stage3, stage4. |
24 | ||
c6396a0b | 25 | # Suppress smart makes who think they know how to automake Yacc files |
26 | .y.c: | |
27 | ||
32e6d418 | 28 | # Variables that exist for you to override. |
29 | # See below for how to change them for certain systems. | |
30 | ||
31 | # Selection of languages to be made. | |
32 | LANGUAGES = c c++ objective-c proto | |
33 | ||
34 | ALLOCA = | |
1ab99fde | 35 | ALLOCA_FLAGS = |
94c53b91 | 36 | ALLOCA_FINISH = true |
32e6d418 | 37 | |
38 | # Various ways of specifying flags for compilations: | |
39 | # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. | |
40 | # BOOT_CFLAGS is the value of CFLAGS to pass | |
41 | # to the stage2 and stage3 compilations | |
42 | # XCFLAGS is used for most compilations but not when using the GCC just built. | |
43 | XCFLAGS = | |
44 | CFLAGS = -g | |
45 | BOOT_CFLAGS = -O $(CFLAGS) | |
46 | # These exists to be overridden by the x-* and t-* files, respectively. | |
47 | X_CFLAGS = | |
48 | T_CFLAGS = | |
49 | ||
50 | X_CPPFLAGS = | |
51 | T_CPPFLAGS = | |
52 | ||
53 | CC = cc | |
54 | BISON = bison | |
9e74f24f | 55 | BISONFLAGS = -v |
32e6d418 | 56 | AR = ar |
57 | OLDAR_FLAGS = qc | |
58 | AR_FLAGS = rc | |
59 | SHELL = /bin/sh | |
60 | # on sysV, define this as cp. | |
61 | INSTALL = install -c | |
62 | # These permit overriding just for certain files. | |
63 | INSTALL_PROGRAM = $(INSTALL) | |
64 | INSTALL_DATA = $(INSTALL) | |
65 | SYMLINK = ln -s | |
bc51108a | 66 | MAKEINFO = makeinfo |
32e6d418 | 67 | |
68 | # Define this as & to perform parallel make on a Sequent. | |
69 | # Note that this has some bugs, and it seems currently necessary | |
70 | # to compile all the gen* files first by hand to avoid erroneous results. | |
71 | P = | |
72 | ||
73 | # How to invoke ranlib. | |
74 | RANLIB = ranlib | |
75 | # Test to use to see whether ranlib exists on the system. | |
76 | RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ] | |
77 | ||
78 | # Compiler to use for compiling libgcc1.a. | |
79 | # OLDCC should not be the GNU C compiler, | |
80 | # since that would compile typical libgcc1.a functions such as mulsi3 | |
81 | # into infinite recursions. | |
82 | OLDCC = cc | |
83 | ||
84 | # CFLAGS for use with OLDCC, for compiling libgcc1.a. | |
85 | # NOTE: -O does not work on some Unix systems! | |
86 | CCLIBFLAGS = -O | |
87 | ||
c6396a0b | 88 | # Version of ar to use when compiling libgcc1.a. |
32e6d418 | 89 | OLDAR = ar |
90 | ||
2cfd79fe | 91 | # Target to use when installing include directory. Either |
92 | # install-headers-tar or install-headers-cpio. | |
93 | INSTALL_HEADERS_DIR = install-headers-tar | |
94 | ||
b3781cc4 | 95 | # The GCC to use for compiling libgcc2.a, enquire, and cross-test. |
96 | # Usually the one we just built. | |
32e6d418 | 97 | # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS). |
79613d1b | 98 | GCC_FOR_TARGET = ./xgcc -B./ |
32e6d418 | 99 | |
100 | # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. | |
101 | # It omits XCFLAGS, and specifies -B./. | |
b3781cc4 | 102 | # It also specifies -B$(tooldir)/ to find as and ld for a cross compiler. |
66e9b81a | 103 | GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) |
32e6d418 | 104 | |
105 | # Special flags for compiling enquire. | |
106 | # We disable optimization to make floating point more reliable. | |
f06c46e6 | 107 | ENQUIRE_CFLAGS = -DNO_MEM -DNO_STDDEF -DNO_LONG_DOUBLE_IO -O0 |
32e6d418 | 108 | ENQUIRE_LDFLAGS = $(LDFLAGS) |
109 | ||
110 | # Tools to use when building a cross-compiler. | |
111 | # These are used because `configure' appends `cross-make' | |
112 | # to the makefile when making a cross-compiler. | |
113 | ||
114 | TARGET_TOOLPREFIX = $(tooldir)/bin/ | |
115 | AR_FOR_TARGET = $(TARGET_TOOLPREFIX)ar | |
116 | AR_FOR_TARGET_FLAGS = rc | |
117 | RANLIB_FOR_TARGET = $(TARGET_TOOLPREFIX)ranlib | |
118 | RANLIB_TEST_FOR_TARGET = [ -f $(TARGET_TOOLPREFIX)ranlib ] | |
32e6d418 | 119 | |
3f69fed5 | 120 | # Dir to search for system headers. Overridden by cross-make. |
121 | SYSTEM_HEADER_DIR = /usr/include | |
122 | ||
8bd8ea06 | 123 | # There may be a premade insn-attrtab.c for this machine. |
124 | # (You could rebuild it with genattrtab as usual, but it takes a long time.) | |
125 | # PREMADE_ATTRTAB is the file name of the file to use. | |
126 | # PREMADE_ATTRTAB_MD is the md file it corresponds to. | |
127 | PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md. | |
128 | PREMADE_ATTRTAB = | |
129 | ||
32e6d418 | 130 | target= ... `configure' substitutes actual target name here. |
131 | xmake_file= ... `configure' substitutes actual x- file name here. | |
132 | tmake_file= ... `configure' substitutes actual t- file name here. | |
18196d1e | 133 | version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c` |
32e6d418 | 134 | |
135 | # Directory where sources are, from where we are. | |
136 | srcdir = . | |
137 | # Common prefix for installation directories. | |
138 | # NOTE: This directory must exist when you start installation. | |
139 | prefix = /usr/local | |
2ffdcadf | 140 | # Directory in which to put localized header files. On the systems with |
141 | # gcc as the native cc, `local_prefix' may not be `prefix' which is | |
142 | # `/usr'. | |
143 | local_prefix = $(prefix) | |
c6396a0b | 144 | # Directory in which to put host dependent programs and libraries |
145 | exec_prefix = $(prefix) | |
32e6d418 | 146 | # Directory in which to put the executable for the command `gcc' |
c6396a0b | 147 | bindir = $(exec_prefix)/bin |
32e6d418 | 148 | # Directory in which to put the directories used by the compiler. |
c6396a0b | 149 | libdir = $(exec_prefix)/lib |
32e6d418 | 150 | # Directory in which the compiler finds executables, libraries, etc. |
c6396a0b | 151 | libsubdir = $(libdir)/gcc-lib/$(target)/$(version) |
f8330604 | 152 | # Directory for header file assert.h. |
9671ce48 | 153 | includedir = $(local_prefix)/include |
db9a0b19 | 154 | # assertdir is overridden in cross-make. |
155 | assertdir = $(includedir) | |
32e6d418 | 156 | # Extension (if any) to put in installed man-page filename. |
157 | manext = .1 | |
158 | # Directory in which to put man pages. | |
159 | mandir = $(prefix)/man/man1 | |
160 | # Directory in which to find other cross-compilation tools and headers. | |
161 | # Used in install-cross. | |
162 | tooldir = $(prefix)/$(target) | |
f32abccb | 163 | # Dir for temp files. |
164 | tmpdir = /tmp | |
32e6d418 | 165 | |
166 | # Additional system libraries to link with. | |
167 | CLIB= | |
168 | ||
169 | # Change this to a null string if obstacks are installed in the | |
170 | # system library. | |
171 | OBSTACK=obstack.o | |
172 | ||
173 | # Specify the rule for actually making libgcc1.a. | |
c6396a0b | 174 | # The value may be empty; that means to do absolutely nothing |
175 | # with or for libgcc1.a. | |
32e6d418 | 176 | LIBGCC1 = libgcc1.a |
177 | ||
178 | # Specify the rule for actually making libgcc2.a. | |
179 | LIBGCC2 = libgcc2.a | |
180 | ||
181 | # Options to use when compiling libgcc2.a. | |
182 | # -g1 causes output of debug info only for file-scope entities. | |
183 | # we use this here because that should be enough, and also | |
184 | # so that -g1 will be tested. | |
185 | LIBGCC2_CFLAGS = -O2 $(GCC_CFLAGS) -g1 | |
186 | ||
187 | # List of extra executables that should be compiled for this target machine | |
188 | # that are used for compiling from source code to object code. | |
189 | # The rules for compiling them should be in the t-* file for the machine. | |
190 | EXTRA_PASSES = | |
191 | ||
c6396a0b | 192 | # Like EXTRA_PASSES, but these are used when linking. |
193 | EXTRA_PROGRAMS = | |
194 | ||
195 | # List of extra object files that should be compiled for this target machine. | |
32e6d418 | 196 | # The rules for compiling them should be in the t-* file for the machine. |
197 | EXTRA_PARTS = | |
198 | ||
c6396a0b | 199 | # List of extra object files that should be compiled and linked with |
200 | # compiler proper (cc1, cc1obj, cc1plus). | |
201 | EXTRA_OBJS = | |
202 | ||
630c76ba | 203 | # List of additional header files to install. |
204 | # Often this is edited directly by `configure'. | |
205 | EXTRA_HEADERS = | |
206 | ||
79f818d0 | 207 | # Set this to `ld' to enable use of collect2. |
208 | # USE_COLLECT2 = | |
209 | # It is convenient for configure to add the assignment at the beginning, | |
210 | # so don't override it here. | |
211 | ||
32e6d418 | 212 | # List of extra C and assembler files to add to libgcc1.a. |
213 | # Assembler files should have names ending in `.asm'. | |
214 | LIB1FUNCS_EXTRA = | |
215 | ||
216 | # List of extra C and assembler files to add to libgcc2.a. | |
217 | # Assembler files should have names ending in `.asm'. | |
218 | LIB2FUNCS_EXTRA = | |
219 | ||
2cfd79fe | 220 | # Default float.h source to use for cross-compiler. |
221 | CROSS_FLOAT_H=float.h-cross | |
222 | ||
32e6d418 | 223 | # Program to convert libraries. |
224 | LIBCONVERT = | |
225 | ||
226 | # Control whether header files are installed. | |
32e6d418 | 227 | INSTALL_HEADERS=install-headers |
228 | ||
229 | # Select which version of fixincludes to use (I.E. regular versus SVR4) | |
6848a9c6 | 230 | # This value is overridden directly by configure. |
32e6d418 | 231 | FIXINCLUDES=fixincludes |
232 | ||
106a27e5 | 233 | # Additional directories of header files to run fixincludes on. |
234 | # On most systems, this is empty. | |
235 | OTHER_FIXINCLUDES_DIRS= | |
236 | ||
77a164d8 | 237 | # List of things which should already be built whenever we try to use xgcc |
32e6d418 | 238 | # to compile anything (without linking). |
77a164d8 | 239 | GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES) |
32e6d418 | 240 | |
77a164d8 | 241 | # List of things which should already be built whenever we try to use xgcc |
32e6d418 | 242 | # to link anything. |
79f818d0 | 243 | GCC_PARTS=$(GCC_PASSES) libgcc.a $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS) |
32e6d418 | 244 | |
32e6d418 | 245 | # Directory to link to, when using the target `maketest'. |
246 | DIR = ../gcc | |
247 | ||
248 | # Flags to use when cross-building GCC. | |
249 | # Prefix to apply to names of object files when using them | |
250 | # to run on the machine we are compiling on. | |
251 | HOST_PREFIX= | |
252 | # Prefix to apply to names of object files when compiling them | |
253 | # to run on the machine we are compiling on. | |
254 | # The default for this variable is chosen to keep these rules | |
255 | # out of the way of the other rules for compiling the same source files. | |
256 | HOST_PREFIX_1=loser- | |
257 | HOST_CC=$(CC) | |
258 | HOST_CFLAGS=$(ALL_CFLAGS) | |
c6396a0b | 259 | HOST_CLIB=$(CLIB) |
32e6d418 | 260 | HOST_LDFLAGS=$(LDFLAGS) |
261 | HOST_CPPFLAGS=$(ALL_CPPFLAGS) | |
c6396a0b | 262 | HOST_ALLOCA=$(ALLOCA) |
263 | HOST_MALLOC=$(MALLOC) | |
264 | HOST_OBSTACK=$(OBSTACK) | |
32e6d418 | 265 | |
266 | # Choose the real default target. | |
267 | ALL=all.internal | |
268 | ||
269 | # Choose the real install target. | |
2cfd79fe | 270 | INSTALL_TARGET=install-normal |
271 | ||
272 | # Source for float.h. Overridden by cross-make. | |
273 | FLOAT_H=float.h-nat | |
32e6d418 | 274 | |
275 | # End of variables for you to override. | |
276 | ||
277 | # Definition of `all' is here so that new rules inserted by sed | |
278 | # do not specify the default target. | |
279 | # The real definition is under `all.internal' (for native compilers) | |
280 | # or `all.cross' (for cross compilers). | |
c6396a0b | 281 | all: all.indirect |
32e6d418 | 282 | |
131b361e | 283 | # This tells GNU Make version 3 not to put all variables in the environment. |
284 | .NOEXPORT: | |
285 | ||
32e6d418 | 286 | # sed inserts variable overrides after the following line. |
a0a99f10 | 287 | ####target overrides |
288 | ####host overrides | |
289 | ####cross overrides | |
e77fd588 | 290 | ####build overrides |
32e6d418 | 291 | \f |
292 | # Now figure out from those variables how to compile and link. | |
293 | ||
c6396a0b | 294 | all.indirect: $(ALL) |
295 | ||
34b1478f | 296 | # IN_GCC tells obstack.h to use gstddef.h. |
297 | INTERNAL_CFLAGS = $(CROSS) -DIN_GCC | |
32e6d418 | 298 | |
299 | # This is the variable actually used when we compile. | |
300 | ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) | |
301 | ||
302 | # Likewise. | |
303 | ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) | |
304 | ||
305 | # Even if ALLOCA is set, don't use it if compiling with GCC. | |
c6396a0b | 306 | USE_ALLOCA= ` case "${CC}" in "${OLDCC}") echo ${ALLOCA} ;; esac ` |
307 | USE_HOST_ALLOCA= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac ` | |
308 | USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac ` | |
309 | USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac ` | |
32e6d418 | 310 | |
311 | # Dependency on obstack, alloca, malloc or whatever library facilities | |
312 | # are not installed in the system libraries. | |
313 | # We don't use USE_ALLOCA because backquote expansion doesn't work in deps. | |
314 | LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC) | |
315 | ||
316 | # Likewise, for use in the tools that must run on this machine | |
317 | # even if we are cross-building GCC. | |
318 | # We don't use USE_ALLOCA because backquote expansion doesn't work in deps. | |
c6396a0b | 319 | HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) |
32e6d418 | 320 | |
321 | # How to link with both our special library facilities | |
322 | # and the system's installed libraries. | |
323 | LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB) | |
324 | ||
325 | # Likewise, for use in the tools that must run on this machine | |
326 | # even if we are cross-building GCC. | |
c6396a0b | 327 | HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \ |
328 | $(HOST_CLIB) | |
32e6d418 | 329 | |
330 | HOST_RTL = $(HOST_PREFIX)rtl.o | |
331 | HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o | |
262d46de | 332 | HOST_PRINT = $(HOST_PREFIX)print-rtl.o |
32e6d418 | 333 | |
334 | # Specify the directories to be searched for header files. | |
335 | # Both . and srcdir are used, in that order, | |
336 | # so that tm.h and config.h will be found in the compilation | |
337 | # subdirectory rather than in the source directory. | |
338 | INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config | |
339 | SUBDIR_INCLUDES = -I.. -I../$(srcdir) -I../$(srcdir)/config | |
340 | ||
341 | # Always use -I$(srcdir)/config when compiling. | |
342 | .c.o: | |
343 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< | |
344 | ||
345 | # This tells GNU make version 3 not to export all the variables | |
346 | # defined in this file into the environment. | |
347 | .NOEXPORT: | |
348 | \f | |
349 | # Lists of files for various purposes. | |
350 | ||
351 | # A list of all the language-specific executables. | |
352 | COMPILERS = cc1 cc1plus cc1obj | |
353 | ||
354 | # Language-specific object files for C. | |
1294913b | 355 | C_OBJS = c-parse.o c-lang.o c-lex.o c-pragma.o \ |
356 | c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o | |
32e6d418 | 357 | |
358 | # Language-specific object files for Objectionable C. | |
1294913b | 359 | OBJC_OBJS = objc-parse.o objc-act.o c-lex.o c-pragma.o \ |
360 | c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o | |
32e6d418 | 361 | |
362 | # Language-specific object files for C++. | |
363 | CPLUS_OBJS = cp-parse.o cp-decl.o cp-decl2.o \ | |
364 | cp-typeck.o cp-type2.o cp-tree.o cp-ptree.o \ | |
365 | cp-cvt.o cp-search.o cp-lex.o cp-gc.o cp-call.o \ | |
366 | cp-class.o cp-init.o cp-method.o cp-except.o \ | |
367 | cp-expr.o cp-pt.o cp-edsel.o cp-xref.o \ | |
368 | $(CPLUS_INPUT) cp-spew.o c-common.o | |
369 | ||
370 | # Language-independent object files. | |
371 | OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \ | |
372 | function.o stmt.o expr.o calls.o expmed.o explow.o optabs.o varasm.o \ | |
79f818d0 | 373 | rtl.o print-rtl.o rtlanal.o emit-rtl.o \ |
374 | dbxout.o sdbout.o dwarfout.o xcoffout.o \ | |
32e6d418 | 375 | integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \ |
8a4b1e01 | 376 | regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \ |
32e6d418 | 377 | insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \ |
bdb66cef | 378 | insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \ |
de6985af | 379 | insn-attrtab.o aux-output.o getpwd.o convert.o $(EXTRA_OBJS) |
32e6d418 | 380 | |
381 | # GEN files are listed separately, so they can be built before doing parallel | |
382 | # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load | |
383 | # them before rtl.o is compiled. | |
384 | GEN= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep | |
385 | ||
386 | # Files to be copied away after each stage in building. | |
387 | STAGESTUFF = *.o insn-flags.h insn-config.h insn-codes.h \ | |
388 | insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \ | |
389 | insn-attr.h insn-attrtab.c \ | |
390 | stamp-flags stamp-config stamp-codes \ | |
391 | stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \ | |
d7330690 | 392 | stamp-attr stamp-attrtab stamp-proto \ |
32e6d418 | 393 | genemit genoutput genrecog genextract genflags gencodes genconfig genpeep \ |
394 | genattrtab genattr \ | |
79f818d0 | 395 | $(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross cccp \ |
0b20f012 | 396 | cc1plus cc1obj enquire protoize unprotoize specs collect2 $(USE_COLLECT2) |
32e6d418 | 397 | |
398 | # Members of libgcc1.a. | |
399 | LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \ | |
400 | _lshrsi3 _lshlsi3 _ashrsi3 _ashlsi3 \ | |
401 | _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \ | |
402 | _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \ | |
403 | _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \ | |
404 | _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \ | |
405 | _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2 | |
406 | ||
407 | # Library members defined in libgcc2.c. | |
408 | LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \ | |
dc1db499 | 409 | _lshrdi3 _lshldi3 _ashldi3 _ashrdi3 _ffsdi2 \ |
4b8f50a8 | 410 | _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \ |
32e6d418 | 411 | _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \ |
03ae18f4 | 412 | __gcc_bcmp _varargs _eprintf _op_new _new_handler _op_delete \ |
c59af377 | 413 | _bb _shtab _clear_cache _trampoline __main _exit _ctors |
32e6d418 | 414 | |
415 | # Header files that are made available under the same name | |
77a164d8 | 416 | # to programs compiled with GCC. |
f8330604 | 417 | USER_H = va-alpha.h va-i860.h va-i960.h va-mips.h va-m88k.h \ |
131bde04 | 418 | va-pa.h va-pyr.h va-sparc.h va-clipper.h va-spur.h proto.h $(EXTRA_HEADERS) |
32e6d418 | 419 | |
32e6d418 | 420 | # The files that "belong" in CONFIG_H are deliberately omitted |
421 | # because having them there would not be useful in actual practice. | |
422 | # All they would do is cause complete recompilation every time | |
423 | # one of the machine description files is edited. | |
424 | # That may or may not be what one wants to do. | |
425 | # If it is, rm *.o is an easy way to do it. | |
426 | # CONFIG_H = config.h tm.h | |
427 | CONFIG_H = | |
428 | RTL_H = rtl.h rtl.def machmode.h machmode.def | |
429 | TREE_H = tree.h real.h tree.def machmode.h machmode.def | |
430 | CPLUS_TREE_H = $(TREE_H) cp-tree.h cp-tree.def | |
431 | \f | |
432 | # Avoid a lot of time thinking about remaking Makefile.in and *.def. | |
433 | .SUFFIXES: .in .def | |
434 | ||
79f818d0 | 435 | Makefile: $(srcdir)/Makefile.in $(srcdir)/configure $(srcdir)/version.c \ |
32e6d418 | 436 | $(srcdir)/config/$(xmake_file) $(srcdir)/config/$(tmake_file) |
437 | sh config.status | |
438 | ||
439 | all.internal: start.encap rest.encap | |
440 | # This is what to compile if making a cross-compiler. | |
87540b0a | 441 | # Note that we can compile enquire using the cross-compiler just build, |
442 | # although we can't run it on this machine. | |
443 | all.cross: native gcc-cross specs libgcc.a stmp-headers cross-test enquire $(EXTRA_PARTS) | |
e77fd588 | 444 | # This is what to compile if making gcc with a cross-compiler. |
2cd018ae | 445 | all.build: native xgcc $(EXTRA_PARTS) |
32e6d418 | 446 | # This is what must be made before installing GCC and converting libraries. |
3f69fed5 | 447 | start.encap: native xgcc specs $(LIBGCC1) xlimits.h |
32e6d418 | 448 | # Use this to make a GCC that will be used only to recompile GCC. |
449 | for-bootstrap: start.encap libgcc.a | |
450 | # These can't be made, with COFF encapsulation, until after GCC can run. | |
2cfd79fe | 451 | rest.encap: libgcc.a stmp-headers $(EXTRA_PARTS) |
32e6d418 | 452 | # This is what is made with the host's compiler |
453 | # whether making a cross compiler or not. | |
79f818d0 | 454 | native: config.status cpp $(LANGUAGES) $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) |
32e6d418 | 455 | |
456 | # Define the names for selecting languages in LANGUAGES. | |
457 | C c: cc1 | |
458 | C++ c++: cc1plus | |
4f1fd857 | 459 | OBJC objc: cc1obj objc-runtime |
460 | OBJECTIVE-C objective-c: cc1obj objc-runtime | |
32e6d418 | 461 | PROTO: proto |
462 | ||
c6396a0b | 463 | # Really, really stupid make features, such as SUN's KEEP_STATE, may force |
464 | # a target to build even if it is up-to-date. So we must verify that | |
465 | # config.status does not exist before failing. | |
32e6d418 | 466 | config.status: |
c6396a0b | 467 | @if [ ! -f config.status ] ; then \ |
468 | echo You must configure gcc. Look at the INSTALL file for details.; \ | |
469 | false; \ | |
470 | else \ | |
471 | true; \ | |
472 | fi | |
32e6d418 | 473 | |
840a6e8d | 474 | # On the target machine, finish building a cross compiler. |
475 | # This does the things that can't be done on the host machine. | |
d82b9c93 | 476 | rest.cross: libgcc.a gfloat.h specs |
840a6e8d | 477 | |
d7330690 | 478 | # Verify that it works to compile and link cross-test. |
479 | # If it does, then there are sufficient replacements for libgcc1.a. | |
6b2f2531 | 480 | cross-test: cross-test.o native gcc-cross libgcc.a $(GCC_PARTS) |
d7330690 | 481 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) cross-test.o -o $@ |
482 | cross-test.o: cross-test.c native gcc-cross | |
483 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/cross-test.c | |
484 | ||
840a6e8d | 485 | # Recompile all the language-independent object files. |
486 | # This is used only if the user explicitly asks for it. | |
32e6d418 | 487 | compilations: ${OBJS} |
488 | ||
77a164d8 | 489 | # We call this executable `xgcc' rather than `gcc' |
490 | # to avoid confusion if the current directory is in the path | |
491 | # and CC is `gcc'. It is renamed to `gcc' when it is installed. | |
492 | xgcc: gcc.o version.o $(LIBDEPS) | |
493 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o xgcc gcc.o version.o $(LIBS) | |
840a6e8d | 494 | |
495 | # Dump a specs file to make -B./ read these specs over installed ones. | |
77a164d8 | 496 | specs: xgcc |
c666179a | 497 | $(GCC_FOR_TARGET) -dumpspecs > specs |
32e6d418 | 498 | |
77a164d8 | 499 | # We do want to create an executable named `xgcc', so we can use it to |
32e6d418 | 500 | # compile libgcc2.a. |
501 | # Also create gcc-cross, so that install-common will install properly. | |
77a164d8 | 502 | gcc-cross: xgcc |
503 | cp xgcc gcc-cross | |
32e6d418 | 504 | |
505 | cc1:$(P) $(C_OBJS) $(OBJS) $(LIBDEPS) | |
506 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1 $(C_OBJS) $(OBJS) $(LIBS) | |
507 | ||
508 | cc1plus:$(P) $(CPLUS_OBJS) $(OBJS) $(LIBDEPS) | |
509 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1plus $(CPLUS_OBJS) $(OBJS) $(LIBS) | |
510 | ||
511 | cc1obj:$(P) $(OBJC_OBJS) $(OBJS) $(LIBDEPS) | |
512 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1obj $(OBJC_OBJS) $(OBJS) $(LIBS) | |
513 | ||
2cfd79fe | 514 | # Copy float.h from its source. |
d82b9c93 | 515 | gfloat.h: $(FLOAT_H) |
516 | cp $(FLOAT_H) gfloat.h | |
2cfd79fe | 517 | |
518 | # Create float.h source for the native machine. | |
519 | float.h-nat: enquire | |
520 | -./enquire -f > float.h-nat | |
521 | ||
522 | # Create a dummy float.h source for a cross-compiler. | |
523 | float.h-cross: | |
524 | echo "#error float.h values not known for cross-compiler" > float.h-cross | |
32e6d418 | 525 | |
526 | # Used to compile enquire with standard cc, but have forgotten why. | |
527 | # Let's try with GCC. | |
528 | enquire: enquire.o $(GCC_PARTS) | |
529 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@ | |
530 | enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) | |
1a754c64 | 531 | # -if [ "$(srcdir)" != "." ]; then rm -f ./enquire.c; else true; fi |
532 | # -cp $(srcdir)/enquire.c . > /dev/null 2>&1 | |
c6396a0b | 533 | # Breaking this line caused a problem with one version of GNU make. |
1a754c64 | 534 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c |
3f69fed5 | 535 | |
536 | # Build the version of limits.h that we will install. | |
537 | xlimits.h: glimits.h limitx.h limity.h | |
538 | if [ -f $(SYSTEM_HEADER_DIR)/limits.h ] ; then \ | |
539 | cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > xlimits.h; \ | |
540 | else \ | |
541 | cat $(srcdir)/glimits.h > xlimits.h; \ | |
542 | fi | |
32e6d418 | 543 | \f |
544 | # Build libgcc.a. | |
545 | # This is done in two parts because some functions, in libgcc1.c, | |
77a164d8 | 546 | # must be compiled with something other than GCC, |
547 | # while the rest, in libgcc2.c, must be compiled with xgcc. | |
548 | # That means we can't do libgcc2.c until after xgcc, cc1, etc. | |
32e6d418 | 549 | |
550 | # Use this as value of LIBGCC1 to cause conversion to GNU library format. | |
551 | # LIBCONVERT should put its output in libgcc1.conv. | |
552 | libgcc1.conv: libgcc1.a | |
553 | $(LIBCONVERT) libgcc1.a libgcc1.conv | |
554 | ||
555 | # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely. | |
556 | # Make an empty file instead. | |
66e9b81a | 557 | libgcc1.null: $(GCC_PASSES) |
32e6d418 | 558 | echo "__foo () {}" > dummy.c |
559 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c | |
560 | $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy.o | |
561 | rm -f dummy.o dummy.c | |
562 | ||
fe918d35 | 563 | # This is $(LIBGCC1) for a cross-compiler. |
564 | # We have no automatic way of building libgcc1.a, | |
565 | # so it's up to the installer to find a way to do that. | |
566 | # This rule deliberately does not depend on libgcc1.a | |
567 | # so that it will fail if the installer hasn't provided it. | |
568 | libgcc1.cross: | |
569 | mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false) | |
570 | ||
32e6d418 | 571 | # Compile the library of arithmetic subroutines with the native compiler. |
77a164d8 | 572 | # Don't compile it with GCC! |
32e6d418 | 573 | # (That would cause most arithmetic functions to call themselves.) |
574 | libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status | |
575 | -rm -f tmplibgcc1.a | |
576 | # Actually build it in tmplibgcc1.a, then rename at end, | |
577 | # so that libgcc1.a itself remains nonexistent if compilation is aborted. | |
578 | # -e causes any failing command to make this rule fail. | |
579 | # -e doesn't work in certain shells, so we test $$? as well. | |
580 | set -e; \ | |
581 | for name in $(LIB1FUNCS); \ | |
582 | do \ | |
583 | echo $${name}; \ | |
584 | rm -f $${name}.o; \ | |
585 | $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \ | |
586 | if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ | |
587 | mv libgcc1.o $${name}.o; \ | |
588 | $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \ | |
589 | rm -f $${name}.o; \ | |
590 | done | |
591 | # Some shells crash when a loop has no items. | |
592 | # So make sure there is always at least one--`..'. | |
593 | # Then ignore it. | |
594 | # We don't use -e here because there are if statements | |
595 | # that should not make the command give up when the if condition is false. | |
596 | # Instead, we test for failure after each command where it matters. | |
c6396a0b | 597 | -for file in .. $(LIB1FUNCS_EXTRA); \ |
32e6d418 | 598 | do \ |
599 | if [ x$${file} != x.. ]; then \ | |
600 | name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \ | |
601 | echo $${name}; \ | |
602 | if [ $${name}.asm = $${file} ]; then \ | |
f32abccb | 603 | cp $${file} $${name}.s || exit 1; file=$${name}.s; \ |
32e6d418 | 604 | else true; fi; \ |
605 | $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \ | |
606 | if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ | |
607 | $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \ | |
608 | if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ | |
609 | rm -f $${name}.[so]; \ | |
610 | else true; \ | |
611 | fi; \ | |
612 | done | |
613 | mv tmplibgcc1.a libgcc1.a | |
614 | ||
615 | # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled. | |
616 | # But recompiling cc1 should not force recompilation of libgcc2.a. | |
617 | # If you want to force recompilation, delete libgcc2.a. | |
66e9b81a | 618 | libgcc2.ready: $(GCC_PASSES) |
32e6d418 | 619 | -if [ -f libgcc2.ready ] ; then \ |
620 | true; \ | |
621 | else \ | |
622 | touch libgcc2.ready; \ | |
623 | fi | |
624 | ||
625 | libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \ | |
33927595 | 626 | machmode.h longlong.h gbl-ctors.h config.status |
32e6d418 | 627 | # Actually build it in tmplibgcc2.a, then rename at end, |
628 | # so that libgcc2.a itself remains nonexistent if compilation is aborted. | |
629 | -rm -f tmplibgcc2.a | |
630 | # -e causes any failing command to make this rule fail. | |
631 | # -e doesn't work in certain shells, so we test $$? as well. | |
632 | set -e; \ | |
633 | for name in $(LIB2FUNCS); \ | |
634 | do \ | |
635 | echo $${name}; \ | |
c6396a0b | 636 | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \ |
32e6d418 | 637 | $(srcdir)/libgcc2.c -o $${name}.o; \ |
638 | if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ | |
639 | $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \ | |
640 | rm -f $${name}.o; \ | |
641 | done | |
642 | # Some shells crash when a loop has no items. | |
643 | # So make sure there is always at least one--`..'. | |
644 | # Then ignore it. | |
645 | # We don't use -e here because there are if statements | |
646 | # that should not make the command give up when the if condition is false. | |
647 | # Instead, we test for failure after each command where it matters. | |
c6396a0b | 648 | -for file in .. $(LIB2FUNCS_EXTRA); \ |
32e6d418 | 649 | do \ |
650 | if [ x$${file} != x.. ]; then \ | |
651 | name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \ | |
652 | echo $${name}; \ | |
653 | if [ $${name}.asm = $${file} ]; then \ | |
f32abccb | 654 | cp $${file} $${name}.s || exit 1; file=$${name}.s; \ |
32e6d418 | 655 | else true; fi; \ |
c6396a0b | 656 | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \ |
32e6d418 | 657 | if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
658 | $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \ | |
659 | rm -f $${name}.[so]; \ | |
660 | else true; \ | |
661 | fi; \ | |
662 | done | |
663 | mv tmplibgcc2.a libgcc2.a | |
664 | # These lines were deleted from above the mv command | |
665 | # because ranlibing libgcc.a itself should suffice. | |
666 | # -if [ x${HPUX_GAS} = x ] ; then \ | |
667 | # if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi \ | |
668 | # else true; fi | |
669 | ||
670 | # Combine the various libraries into a single library, libgcc.a. | |
671 | libgcc.a: $(LIBGCC1) $(LIBGCC2) | |
672 | -rm -rf tmplibgcc.a libgcc.a tmpcopy | |
673 | mkdir tmpcopy | |
c6396a0b | 674 | -if [ x$(LIBGCC1) != x ]; \ |
675 | then (cd tmpcopy; $(AR) x ../$(LIBGCC1)); \ | |
676 | else true; \ | |
677 | fi | |
32e6d418 | 678 | (cd tmpcopy; $(AR) x ../$(LIBGCC2)) |
679 | (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *.o) | |
680 | rm -rf tmpcopy | |
681 | -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi | |
682 | # Actually build it in tmplibgcc.a, then rename at end, | |
683 | # so that libgcc.a itself remains nonexistent if compilation is aborted. | |
684 | mv tmplibgcc.a libgcc.a | |
685 | ||
4f1fd857 | 686 | objc-runtime: libobjc.a |
687 | ||
bd594491 | 688 | # Build the Objective C runtime library. |
4f1fd857 | 689 | libobjc.a: cc1obj libgcc2.ready |
d6518ea8 | 690 | if [ -d objc ]; then true; else mkdir objc; fi |
4f1fd857 | 691 | thisdir1=`pwd`; \ |
e5190fd1 | 692 | srcdir1=`cd $(srcdir); pwd`; \ |
4f1fd857 | 693 | cd objc; \ |
72bce1c3 | 694 | $(MAKE) -f $${srcdir1}/objc/Makefile libobjc.a \ |
695 | srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \ | |
696 | GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \ | |
4f1fd857 | 697 | GCC_CFLAGS="$(GCC_CFLAGS)" |
553479e8 | 698 | -rm -f libobjc.a |
8281617f | 699 | ln objc/libobjc.a . >/dev/null 2>&1 || cp objc/libobjc.a . |
4f1fd857 | 700 | -if $(RANLIB_TEST) ; then $(RANLIB) libobjc.a; else true; fi |
701 | ||
702 | # This is used by objc/Makefile if the user runs that directly. | |
703 | sublibobjc.a: cc1obj libgcc2.ready | |
e5190fd1 | 704 | thisdir1=`pwd`; \ |
705 | srcdir1=`cd $(srcdir); pwd`; \ | |
706 | cd objc; \ | |
553479e8 | 707 | $(MAKE) -f $$srcdir1/objc/Makefile libobjc.a \ |
e5190fd1 | 708 | srcdir=$$srcdir1 tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \ |
709 | GCC_FOR_TARGET="$$thisdir1/xgcc -B$$thisdir1/" \ | |
710 | GCC_CFLAGS="$(GCC_CFLAGS)" | |
32e6d418 | 711 | |
712 | # Compile two additional files that are linked with every program | |
713 | # linked using GCC on system V, for the sake of C++ constructors. | |
714 | crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h | |
715 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) -DCRT_BEGIN \ | |
c6396a0b | 716 | -finhibit-size-directive -g0 -c $(srcdir)/crtstuff.c -o crtbegin.o |
32e6d418 | 717 | |
718 | crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h | |
719 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) -DCRT_END \ | |
c6396a0b | 720 | -finhibit-size-directive -g0 -c $(srcdir)/crtstuff.c -o crtend.o |
32e6d418 | 721 | \f |
722 | # Compiling object files from source files. | |
723 | ||
724 | # Note that dependencies on obstack.h are not written | |
725 | # because that file is not part of GCC. | |
726 | # Dependencies on gvarargs.h are not written | |
727 | # because all that file does, when not compiling with GCC, | |
728 | # is include the system varargs.h. | |
729 | ||
730 | # C language specific files. | |
731 | ||
f678532a | 732 | c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h c-parse.h \ |
733 | c-tree.h input.h flags.h | |
32e6d418 | 734 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c |
735 | $(srcdir)/c-parse.c $(srcdir)/c-parse.h: $(srcdir)/c-parse.y | |
736 | cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c | |
c373bd56 | 737 | $(srcdir)/c-parse.y: $(srcdir)/c-parse.in $(srcdir)/cond.awk |
738 | cd $(srcdir); awk -f cond.awk objc=0 c-parse.in > c-parse.y | |
32e6d418 | 739 | |
740 | c-decl.o : c-decl.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h | |
741 | c-typeck.o : c-typeck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h | |
742 | c-lang.o : c-lang.c $(CONFIG_H) $(TREE_H) | |
743 | c-lex.o : c-lex.c $(CONFIG_H) $(TREE_H) c-lex.h c-tree.h c-parse.h \ | |
744 | input.h flags.h | |
745 | c-aux-info.o : c-aux-info.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h | |
746 | c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h | |
b3781cc4 | 747 | c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) |
1294913b | 748 | c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h |
32e6d418 | 749 | |
750 | # C++ language specific files. | |
751 | ||
2ee73e3e | 752 | cp-parse.o : $(srcdir)/cp-parse.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h cp-lex.h |
32e6d418 | 753 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
754 | `echo $(srcdir)/cp-parse.c | sed 's,^\./,,'` | |
755 | ||
756 | $(srcdir)/cp-parse.c $(srcdir)/cp-parse.h : $(srcdir)/cp-parse.y | |
bb02c0b3 | 757 | @echo expect 29 shift/reduce conflicts and 14 reduce/reduce conflicts |
32e6d418 | 758 | cd $(srcdir); $(BISON) $(BISONFLAGS) -d -o cp-parse.c cp-parse.y |
fe918d35 | 759 | cd $(srcdir); grep '^#define[ ]*YYEMPTY' cp-parse.c >>cp-parse.h |
32e6d418 | 760 | |
761 | cp-spew.o : cp-spew.c $(CONFIG_H) $(CPLUS_TREE_H) \ | |
2ee73e3e | 762 | $(srcdir)/cp-parse.h flags.h cp-lex.h |
32e6d418 | 763 | cp-lex.o : cp-lex.c $(CONFIG_H) $(CPLUS_TREE_H) \ |
2ee73e3e | 764 | $(srcdir)/cp-parse.h $(srcdir)/cp-input.c flags.h cp-hash.h cp-lex.h |
32e6d418 | 765 | cp-decl.o : cp-decl.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h \ |
766 | cp-lex.h cp-decl.h stack.h | |
767 | cp-decl2.o : cp-decl2.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h \ | |
768 | cp-lex.h cp-decl.h | |
769 | cp-type2.o : cp-type2.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h | |
2ee73e3e | 770 | cp-typeck.o : cp-typeck.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H) |
771 | cp-class.o : cp-class.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h | |
772 | cp-call.o : cp-call.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h | |
773 | cp-init.o : cp-init.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H) | |
32e6d418 | 774 | cp-method.o : cp-method.c $(CONFIG_H) $(CPLUS_TREE_H) |
775 | cp-cvt.o : cp-cvt.c $(CONFIG_H) $(CPLUS_TREE_H) | |
776 | cp-search.o : cp-search.c $(CONFIG_H) $(CPLUS_TREE_H) stack.h flags.h | |
777 | cp-tree.o : cp-tree.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h | |
778 | cp-ptree.o : cp-ptree.c $(CONFIG_H) $(CPLUS_TREE_H) | |
779 | cp-gc.o : cp-gc.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h | |
2ee73e3e | 780 | cp-except.o : cp-except.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H) |
32e6d418 | 781 | cp-expr.o : cp-expr.c $(CONFIG_H) $(CPLUS_TREE_H) $(RTL_H) flags.h \ |
782 | expr.h insn-codes.h | |
783 | cp-edsel.o : cp-edsel.c $(CONFIG_H) $(CPLUS_TREE_H) stack.h flags.h | |
2ee73e3e | 784 | cp-xref.o : cp-xref.c $(CONFIG_H) $(CPLUS_TREE_H) input.h |
32e6d418 | 785 | cp-pt.o : cp-pt.c $(CONFIG_H) $(CPLUS_TREE_H) cp-decl.h cp-parse.h |
786 | ||
79f818d0 | 787 | # To make a configuration always use collect2, set USE_COLLECT2 to ld. |
788 | ld: collect2 | |
789 | rm -f ld | |
790 | ln collect2 ld | |
791 | ||
32e6d418 | 792 | collect2 : collect2.o version.o $(LIBDEPS) |
e77fd588 | 793 | # Don't try modifying collect2 (aka ld) in place--it might be linking this. |
794 | -rm -f collect2 | |
32e6d418 | 795 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o collect2 collect2.o version.o $(LIBS) |
796 | ||
797 | collect2.o : collect2.c $(CONFIG_H) gstab.h | |
5e03c63d | 798 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
799 | -DTARGET_MACHINE=\"$(target)\" \ | |
800 | -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'` | |
32e6d418 | 801 | |
802 | # Objectionable C language specific files. | |
803 | ||
804 | objc-parse.o : $(srcdir)/objc-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \ | |
222e139b | 805 | c-tree.h input.h flags.h objc-act.h |
32e6d418 | 806 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/objc-parse.c |
807 | $(srcdir)/objc-parse.c : $(srcdir)/objc-parse.y | |
808 | cd $(srcdir); $(BISON) $(BISONFLAGS) objc-parse.y -o objc-parse.c | |
c373bd56 | 809 | $(srcdir)/objc-parse.y: $(srcdir)/c-parse.in $(srcdir)/cond.awk |
810 | cd $(srcdir); awk -f cond.awk objc=1 c-parse.in > objc-parse.y | |
32e6d418 | 811 | |
222e139b | 812 | objc-act.o : objc-act.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h \ |
813 | flags.h objc-act.h | |
32e6d418 | 814 | |
815 | # A file used by all variants of C. | |
816 | ||
817 | c-common.o : c-common.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h | |
818 | ||
819 | # Language-independent files. | |
820 | ||
1294913b | 821 | gcc.o: gcc.c $(CONFIG_H) gvarargs.h config.status |
32e6d418 | 822 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
823 | -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \ | |
c6396a0b | 824 | -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \ |
32e6d418 | 825 | -DDEFAULT_TARGET_MACHINE=\"$(target)\" \ |
aa2143b5 | 826 | -DTOOLDIR_BASE_PREFIX=\"$(prefix)/\" \ |
ae0fea3a | 827 | -DTOOLDIR=\"$(tooldir)/\" \ |
8618ef50 | 828 | $(MAYBE_TARGET_DEFAULT) \ |
32e6d418 | 829 | -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'` |
830 | ||
831 | dumpvers: dumpvers.c | |
832 | ||
833 | version.o: version.c | |
834 | obstack.o: obstack.c | |
835 | ||
beb68ac1 | 836 | convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h |
837 | ||
32e6d418 | 838 | tree.o : tree.c $(CONFIG_H) $(TREE_H) gvarargs.h flags.h function.h |
839 | print-tree.o : print-tree.c $(CONFIG_H) $(TREE_H) | |
840 | stor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H) function.h | |
841 | fold-const.o : fold-const.c $(CONFIG_H) $(TREE_H) flags.h | |
c6396a0b | 842 | toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h input.h \ |
aadb7c33 | 843 | insn-attr.h xcoffout.h defaults.h |
79f818d0 | 844 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
fe918d35 | 845 | $(MAYBE_TARGET_DEFAULT) $(MAYBE_USE_COLLECT2) \ |
846 | -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'` | |
32e6d418 | 847 | |
848 | rtl.o : rtl.c $(CONFIG_H) $(RTL_H) | |
849 | ||
850 | print-rtl.o : print-rtl.c $(CONFIG_H) $(RTL_H) | |
851 | rtlanal.o : rtlanal.c $(CONFIG_H) $(RTL_H) | |
852 | ||
35325097 | 853 | varasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h function.h \ |
854 | defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h | |
32e6d418 | 855 | function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \ |
856 | insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \ | |
857 | recog.h output.h | |
858 | stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \ | |
859 | insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h loop.h recog.h | |
d077a015 | 860 | expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \ |
32e6d418 | 861 | insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h typeclass.h |
862 | calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \ | |
d077a015 | 863 | insn-flags.h gvarargs.h |
32e6d418 | 864 | expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \ |
865 | insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h | |
866 | explow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h hard-reg-set.h \ | |
867 | insn-config.h expr.h recog.h insn-flags.h insn-codes.h | |
868 | optabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \ | |
869 | insn-flags.h insn-config.h insn-codes.h expr.h recog.h | |
870 | dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \ | |
e7748130 | 871 | insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h |
32e6d418 | 872 | sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) gsyms.h flags.h \ |
873 | insn-config.h reload.h | |
874 | dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \ | |
8a19d0d5 | 875 | insn-config.h reload.h output.h defaults.h |
79f818d0 | 876 | xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h |
32e6d418 | 877 | emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) flags.h gvarargs.h function.h \ |
878 | regs.h insn-config.h insn-codes.h real.h expr.h | |
c6396a0b | 879 | getpwd.o : getpwd.c $(CONFIG_H) |
32e6d418 | 880 | |
881 | integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \ | |
882 | insn-flags.h insn-config.h insn-codes.h expr.h real.h function.h | |
883 | ||
884 | jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \ | |
885 | insn-config.h insn-flags.h insn-codes.h expr.h real.h | |
886 | stupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h | |
887 | ||
888 | cse.o : cse.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h real.h \ | |
889 | insn-config.h recog.h | |
890 | loop.o : loop.c $(CONFIG_H) $(RTL_H) flags.h loop.h insn-config.h \ | |
891 | insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h | |
892 | unroll.o : unroll.c $(CONFIG_H) $(RTL_H) insn-config.h insn-codes.h \ | |
893 | integrate.h regs.h flags.h expr.h loop.h | |
894 | flow.o : flow.c $(CONFIG_H) $(RTL_H) flags.h insn-config.h \ | |
895 | basic-block.h regs.h hard-reg-set.h output.h | |
896 | combine.o : combine.c $(CONFIG_H) $(RTL_H) gvarargs.h flags.h \ | |
897 | insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \ | |
898 | basic-block.h recog.h real.h | |
899 | regclass.o : regclass.c $(CONFIG_H) $(RTL_H) hard-reg-set.h flags.h \ | |
4023cea7 | 900 | basic-block.h regs.h insn-config.h recog.h reload.h real.h |
32e6d418 | 901 | local-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) flags.h basic-block.h \ |
902 | regs.h hard-reg-set.h insn-config.h recog.h output.h | |
8a4b1e01 | 903 | global.o : global.c $(CONFIG_H) $(RTL_H) flags.h \ |
32e6d418 | 904 | basic-block.h regs.h hard-reg-set.h insn-config.h output.h |
905 | ||
906 | reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h \ | |
907 | reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h | |
908 | reload1.o : reload1.c $(CONFIG_H) $(RTL_H) flags.h expr.h \ | |
909 | reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \ | |
910 | basic-block.h recog.h output.h | |
911 | caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \ | |
912 | regs.h hard-reg-set.h insn-config.h basic-block.h recog.h reload.h expr.h | |
913 | reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \ | |
914 | basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \ | |
915 | flags.h output.h | |
916 | sched.o : sched.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h \ | |
917 | flags.h insn-config.h insn-attr.h | |
918 | final.o : final.c $(CONFIG_H) $(RTL_H) gvarargs.h flags.h regs.h \ | |
919 | recog.h conditions.h insn-config.h insn-attr.h real.h output.h \ | |
fe918d35 | 920 | hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h |
32e6d418 | 921 | recog.o : recog.c $(CONFIG_H) $(RTL_H) \ |
922 | regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \ | |
923 | insn-flags.h insn-codes.h real.h | |
924 | reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \ | |
925 | regs.h hard-reg-set.h flags.h insn-config.h | |
48c6936b | 926 | |
32e6d418 | 927 | aux-output.o : aux-output.c $(CONFIG_H) \ |
928 | $(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \ | |
929 | insn-flags.h output.h insn-attr.h insn-codes.h | |
930 | ||
931 | # Normally this target is not used; but it is used if you | |
932 | # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c | |
933 | # from the GNU Emacs distribution. | |
32e6d418 | 934 | alloca.o: alloca.c |
32e6d418 | 935 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \ |
fe918d35 | 936 | -Demacs -c `echo $(srcdir)/alloca.c | sed 's,^\./,,'` |
32e6d418 | 937 | $(ALLOCA_FINISH) |
938 | \f | |
939 | # Generate header and source files from the machine description, | |
940 | # and compile them. | |
941 | ||
942 | .PRECIOUS: insn-config.h insn-flags.h insn-codes.h \ | |
943 | insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \ | |
944 | insn-attr.h insn-attrtab.c | |
945 | ||
946 | # The following pair of rules has this effect: | |
947 | # genconfig is run only if the md has changed since genconfig was last run; | |
948 | # but the file insn-config.h is touched only when its contents actually change. | |
949 | ||
950 | # Each of the other insn-* files is handled by a similar pair of rules. | |
951 | ||
3f69fed5 | 952 | # This causes an anomaly in the results of make -n |
953 | # because insn-* is older than stamp-* | |
954 | # and thus make -n thinks that insn-* will be updated | |
955 | # and force recompilation of things that depend on it. | |
9ac790c5 | 956 | # We use move-if-change precisely to avoid such recompilation. |
3f69fed5 | 957 | # But there is no way to teach make -n that it will be avoided. |
958 | ||
32e6d418 | 959 | # Each of the insn-*.[ch] rules has a semicolon at the end, |
960 | # for otherwise the system Make on SunOS 4.1 never tries | |
876dc5b0 | 961 | # to recompile insn-*.o. To avoid problems and extra noise from |
962 | # versions of make which don't like empty commands (nothing after the | |
963 | # trailing `;'), we call true for each. | |
32e6d418 | 964 | |
c2a18965 | 965 | insn-config.h: stamp-config ; @true |
32e6d418 | 966 | stamp-config : md genconfig $(srcdir)/move-if-change |
967 | ./genconfig md > tmp-config.h | |
968 | $(srcdir)/move-if-change tmp-config.h insn-config.h | |
969 | touch stamp-config | |
970 | ||
c2a18965 | 971 | insn-flags.h: stamp-flags ; @true |
32e6d418 | 972 | stamp-flags : md genflags $(srcdir)/move-if-change |
973 | ./genflags md > tmp-flags.h | |
974 | $(srcdir)/move-if-change tmp-flags.h insn-flags.h | |
975 | touch stamp-flags | |
976 | ||
c2a18965 | 977 | insn-codes.h: stamp-codes ; @true |
32e6d418 | 978 | stamp-codes : md gencodes $(srcdir)/move-if-change |
979 | ./gencodes md > tmp-codes.h | |
980 | $(srcdir)/move-if-change tmp-codes.h insn-codes.h | |
981 | touch stamp-codes | |
982 | ||
983 | insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h real.h output.h \ | |
984 | insn-config.h insn-flags.h insn-codes.h | |
985 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c | |
986 | ||
c2a18965 | 987 | insn-emit.c: stamp-emit ; @true |
32e6d418 | 988 | stamp-emit : md genemit $(srcdir)/move-if-change |
989 | ./genemit md > tmp-emit.c | |
990 | $(srcdir)/move-if-change tmp-emit.c insn-emit.c | |
991 | touch stamp-emit | |
992 | ||
993 | insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h \ | |
994 | real.h output.h flags.h | |
995 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c | |
996 | ||
c2a18965 | 997 | insn-recog.c: stamp-recog ; @true |
32e6d418 | 998 | stamp-recog : md genrecog $(srcdir)/move-if-change |
999 | ./genrecog md > tmp-recog.c | |
1000 | $(srcdir)/move-if-change tmp-recog.c insn-recog.c | |
1001 | touch stamp-recog | |
1002 | ||
bdb66cef | 1003 | insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \ |
1004 | insn-config.h flags.h rtl.h recog.h expr.h reload.h | |
1005 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c | |
1006 | ||
1007 | insn-opinit.c: stamp-opinit ; @true | |
1008 | stamp-opinit : md genopinit $(srcdir)/move-if-change | |
1009 | ./genopinit md > tmp-opinit.c | |
1010 | $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c | |
1011 | touch stamp-opinit | |
1012 | ||
32e6d418 | 1013 | insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) |
1014 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c | |
1015 | ||
c2a18965 | 1016 | insn-extract.c: stamp-extract ; @true |
32e6d418 | 1017 | stamp-extract : md genextract $(srcdir)/move-if-change |
1018 | ./genextract md > tmp-extract.c | |
1019 | $(srcdir)/move-if-change tmp-extract.c insn-extract.c | |
1020 | touch stamp-extract | |
1021 | ||
1022 | insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h | |
1023 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c | |
1024 | ||
c2a18965 | 1025 | insn-peep.c: stamp-peep ; @true |
32e6d418 | 1026 | stamp-peep : md genpeep $(srcdir)/move-if-change |
1027 | ./genpeep md > tmp-peep.c | |
1028 | $(srcdir)/move-if-change tmp-peep.c insn-peep.c | |
1029 | touch stamp-peep | |
1030 | ||
1031 | insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) regs.h real.h output.h \ | |
1032 | insn-attr.h insn-config.h | |
1033 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c | |
1034 | ||
c2a18965 | 1035 | insn-attr.h: stamp-attr ; @true |
32e6d418 | 1036 | stamp-attr : md genattr $(srcdir)/move-if-change |
1037 | ./genattr md > tmp-attr.h | |
1038 | $(srcdir)/move-if-change tmp-attr.h insn-attr.h | |
1039 | touch stamp-attr | |
1040 | ||
c2a18965 | 1041 | insn-attrtab.c: stamp-attrtab ; @true |
32e6d418 | 1042 | stamp-attrtab : md genattrtab $(srcdir)/move-if-change |
8bd8ea06 | 1043 | if cmp -s $(PREMADE_ATTRTAB_MD) md; \ |
1044 | then \ | |
1045 | echo Using $(PREMADE_ATTRTAB); \ | |
ab866dde | 1046 | cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \ |
8bd8ea06 | 1047 | else \ |
1048 | ./genattrtab md > tmp-attrtab.c; \ | |
1049 | fi | |
32e6d418 | 1050 | $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c |
1051 | touch stamp-attrtab | |
1052 | ||
1053 | insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h real.h conditions.h \ | |
1054 | hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \ | |
1055 | insn-codes.h | |
1056 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c | |
1057 | ||
c2a18965 | 1058 | insn-output.c: stamp-output ; @true |
32e6d418 | 1059 | stamp-output : md genoutput $(srcdir)/move-if-change |
1060 | ./genoutput md > tmp-output.c | |
1061 | $(srcdir)/move-if-change tmp-output.c insn-output.c | |
1062 | touch stamp-output | |
1063 | \f | |
1064 | # Compile the programs that generate insn-* from the machine description. | |
1065 | # They are compiled with $(HOST_CC), and associated libraries, | |
1066 | # since they need to run on this machine | |
1067 | # even if GCC is being compiled to run on some other machine. | |
1068 | ||
1069 | # $(CONFIG_H) is omitted from the deps of the gen*.o | |
1070 | # because these programs don't really depend on anything | |
1071 | # about the target machine. They do depend on config.h itself, | |
1072 | # since that describes the host machine. | |
1073 | ||
1074 | genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1075 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genconfig \ | |
1076 | genconfig.o $(HOST_RTL) $(HOST_LIBS) | |
1077 | ||
e77fd588 | 1078 | genconfig.o : genconfig.c $(RTL_H) hconfig.h |
32e6d418 | 1079 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c |
1080 | ||
1081 | genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1082 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genflags \ | |
1083 | genflags.o $(HOST_RTL) $(HOST_LIBS) | |
1084 | ||
e77fd588 | 1085 | genflags.o : genflags.c $(RTL_H) hconfig.h |
32e6d418 | 1086 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c |
1087 | ||
1088 | gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1089 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gencodes \ | |
1090 | gencodes.o $(HOST_RTL) $(HOST_LIBS) | |
1091 | ||
e77fd588 | 1092 | gencodes.o : gencodes.c $(RTL_H) hconfig.h |
32e6d418 | 1093 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c |
1094 | ||
1095 | genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1096 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genemit \ | |
1097 | genemit.o $(HOST_RTL) $(HOST_LIBS) | |
1098 | ||
e77fd588 | 1099 | genemit.o : genemit.c $(RTL_H) hconfig.h |
32e6d418 | 1100 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c |
1101 | ||
bdb66cef | 1102 | genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS) |
1103 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genopinit \ | |
1104 | genopinit.o $(HOST_RTL) $(HOST_LIBS) | |
1105 | ||
1106 | genopinit.o : genopinit.c $(RTL_H) hconfig.h | |
1107 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c | |
1108 | ||
32e6d418 | 1109 | genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS) |
1110 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genrecog \ | |
1111 | genrecog.o $(HOST_RTL) $(HOST_LIBS) | |
1112 | ||
e77fd588 | 1113 | genrecog.o : genrecog.c $(RTL_H) hconfig.h |
32e6d418 | 1114 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c |
1115 | ||
1116 | genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1117 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genextract \ | |
1118 | genextract.o $(HOST_RTL) $(HOST_LIBS) | |
1119 | ||
e77fd588 | 1120 | genextract.o : genextract.c $(RTL_H) hconfig.h insn-config.h |
32e6d418 | 1121 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c |
1122 | ||
1123 | genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1124 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genpeep \ | |
1125 | genpeep.o $(HOST_RTL) $(HOST_LIBS) | |
1126 | ||
e77fd588 | 1127 | genpeep.o : genpeep.c $(RTL_H) hconfig.h |
32e6d418 | 1128 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c |
1129 | ||
1130 | genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1131 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattr \ | |
1132 | genattr.o $(HOST_RTL) $(HOST_LIBS) | |
1133 | ||
e77fd588 | 1134 | genattr.o : genattr.c $(RTL_H) hconfig.h |
32e6d418 | 1135 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c |
1136 | ||
262d46de | 1137 | genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS) |
32e6d418 | 1138 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattrtab \ |
262d46de | 1139 | genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS) |
32e6d418 | 1140 | |
e77fd588 | 1141 | genattrtab.o : genattrtab.c $(RTL_H) hconfig.h insn-config.h |
32e6d418 | 1142 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c |
1143 | ||
1144 | genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS) | |
1145 | $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genoutput \ | |
1146 | genoutput.o $(HOST_RTL) $(HOST_LIBS) | |
1147 | ||
e77fd588 | 1148 | genoutput.o : genoutput.c $(RTL_H) hconfig.h |
32e6d418 | 1149 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c |
1150 | \f | |
1151 | # Compile the libraries to be used by gen*. | |
1152 | # If we are not cross-building, gen* use the same .o's that cc1 will use, | |
1153 | # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict | |
1154 | # with the rules for rtl.o, alloca.o, etc. | |
1155 | $(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) $(RTL_H) | |
1156 | rm -f $(HOST_PREFIX)rtl.c | |
e77fd588 | 1157 | sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c |
32e6d418 | 1158 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c |
1159 | ||
262d46de | 1160 | $(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H) |
1161 | rm -f $(HOST_PREFIX)print-rtl.c | |
e77fd588 | 1162 | sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c |
262d46de | 1163 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c |
1164 | ||
32e6d418 | 1165 | $(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H) |
1166 | rm -f $(HOST_PREFIX)rtlanal.c | |
e77fd588 | 1167 | sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c |
32e6d418 | 1168 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c |
1169 | ||
1170 | $(HOST_PREFIX_1)alloca.o: alloca.c | |
1171 | rm -f $(HOST_PREFIX)alloca.c | |
1172 | cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c | |
1173 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c | |
1174 | ||
1175 | $(HOST_PREFIX_1)obstack.o: obstack.c | |
1176 | rm -f $(HOST_PREFIX)obstack.c | |
e77fd588 | 1177 | sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c |
32e6d418 | 1178 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c |
1179 | ||
1180 | $(HOST_PREFIX_1)malloc.o: malloc.c | |
1181 | rm -f $(HOST_PREFIX)malloc.c | |
e77fd588 | 1182 | sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c |
32e6d418 | 1183 | $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c |
1184 | ||
1185 | # This satisfies the dependency that we get if you cross-compile a compiler | |
1186 | # that does not need to compile alloca, malloc or whatever. | |
1187 | $(HOST_PREFIX_1): | |
1188 | touch $(HOST_PREFIX_1) | |
1189 | \f | |
1190 | # Remake cpp and protoize. | |
1191 | ||
1192 | # Making the preprocessor | |
1193 | cpp: cccp | |
1194 | -rm -f cpp | |
1195 | ln cccp cpp | |
1196 | cccp: cccp.o cexp.o version.o $(LIBDEPS) | |
1197 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cccp cccp.o cexp.o version.o $(LIBS) | |
1198 | cexp.o: $(srcdir)/cexp.c $(CONFIG_H) | |
1199 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c | |
1200 | $(srcdir)/cexp.c: $(srcdir)/cexp.y | |
1201 | cd $(srcdir); $(BISON) -o cexp.c cexp.y | |
d6b50af2 | 1202 | cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status |
32e6d418 | 1203 | # The reason we use $(libdir)/g++-include rather than using libsubdir |
1204 | # is for compatibility with the current version of libg++. | |
1205 | $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ | |
c6396a0b | 1206 | -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
1207 | -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \ | |
2ffdcadf | 1208 | -DLOCAL_INCLUDE_DIR=\"$(local_prefix)/include\" \ |
c6396a0b | 1209 | -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \ |
46073b39 | 1210 | -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \ |
ae0fea3a | 1211 | -DTOOLDIR=\"$(tooldir)/\" \ |
32e6d418 | 1212 | -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'` |
1213 | ||
876dc5b0 | 1214 | # Note for the stamp targets, we run the program `true' instead of |
1215 | # having an empty command (nothing following the semicolon). | |
1216 | ||
77a164d8 | 1217 | proto: config.status protoize unprotoize SYSCALLS.c.X |
32e6d418 | 1218 | |
c6396a0b | 1219 | protoize: protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS) |
32e6d418 | 1220 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) \ |
c6396a0b | 1221 | protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) -o $@ |
c2a18965 | 1222 | protoize.o: stamp-proto ; @true |
ab866dde | 1223 | |
1224 | unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS) | |
1225 | $(CC) $(ALL_CFLAGS) $(LDFLAGS) \ | |
1226 | unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) -o $@ | |
c2a18965 | 1227 | unprotoize.o: stamp-proto ; @true |
ab866dde | 1228 | |
1229 | stamp-proto: $(srcdir)/protoize.c getopt.h $(CONFIG_H) | |
32e6d418 | 1230 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
1231 | -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ | |
c6396a0b | 1232 | -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \ |
32e6d418 | 1233 | -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \ |
46073b39 | 1234 | -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \ |
32e6d418 | 1235 | -DLOCAL_INCLUDE_DIR=\"$(prefix)/include\" \ |
1236 | -DSTD_PROTO_DIR=\"$(libsubdir)\" \ | |
ab866dde | 1237 | -DUNPROTOIZE $(srcdir)/protoize.c |
1238 | mv protoize.o unprotoize.o | |
32e6d418 | 1239 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
1240 | -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ | |
c6396a0b | 1241 | -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \ |
32e6d418 | 1242 | -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \ |
46073b39 | 1243 | -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \ |
32e6d418 | 1244 | -DLOCAL_INCLUDE_DIR=\"$(prefix)/include\" \ |
1245 | -DSTD_PROTO_DIR=\"$(libsubdir)\" \ | |
ab866dde | 1246 | $(srcdir)/protoize.c |
77a164d8 | 1247 | touch stamp-proto |
32e6d418 | 1248 | |
1249 | getopt.o: $(srcdir)/getopt.c getopt.h | |
1250 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c | |
1251 | getopt1.o: $(srcdir)/getopt1.c getopt.h | |
1252 | $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c | |
1253 | ||
32e6d418 | 1254 | # This info describes the target machine, so compile with GCC just built. |
79f818d0 | 1255 | SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) |
f678532a | 1256 | -rm -f SYSCALLS.c tmp-SYSCALLS.s |
79f818d0 | 1257 | cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c |
32e6d418 | 1258 | $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
f678532a | 1259 | -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c |
1260 | -rm -f SYSCALLS.c tmp-SYSCALLS.s | |
0b20f012 | 1261 | |
1262 | test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES) | |
c548e550 | 1263 | -rm -f tmp-proto.[cso] |
262d46de | 1264 | cp $(srcdir)/protoize.c tmp-proto.c |
1265 | chmod u+w tmp-proto.c | |
c548e550 | 1266 | ./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \ |
1267 | $(CFLAGS) $(INCLUDES) \ | |
0b20f012 | 1268 | -DGCC_INCLUDE_DIR=0 \ |
1269 | -DGPLUSPLUS_INCLUDE_DIR=0 \ | |
1270 | -DCROSS_INCLUDE_DIR=0 \ | |
46073b39 | 1271 | -DTOOL_INCLUDE_DIR=0 \ |
262d46de | 1272 | -DSTD_PROTO_DIR=0" tmp-proto.c |
1a754c64 | 1273 | @echo '**********' Expect 400 lines of differences. |
c548e550 | 1274 | -diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff |
1275 | -wc -l tmp-proto.diff | |
1276 | ./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \ | |
1277 | $(CFLAGS) $(INCLUDES) \ | |
0b20f012 | 1278 | -DGCC_INCLUDE_DIR=0 \ |
1279 | -DGPLUSPLUS_INCLUDE_DIR=0 \ | |
1280 | -DCROSS_INCLUDE_DIR=0 \ | |
46073b39 | 1281 | -DTOOL_INCLUDE_DIR=0 \ |
262d46de | 1282 | -DSTD_PROTO_DIR=0" tmp-proto.c |
0b20f012 | 1283 | @echo Expect zero differences. |
262d46de | 1284 | diff $(srcdir)/protoize.c tmp-proto.c | cat |
c548e550 | 1285 | -rm -f tmp-proto.[cso] |
32e6d418 | 1286 | \f |
2cfd79fe | 1287 | # Build the include directory. The stamp files are stmp-* rather than |
1288 | # stamp-* so that mostlyclean does not force the include directory to | |
1289 | # be rebuilt. | |
1290 | ||
9e74f24f | 1291 | stmp-headers: stmp-fixinc $(USER_H) gvarargs.h gstdarg.h gstddef.h gsyslimits.h xlimits.h gfloat.h |
2cfd79fe | 1292 | # Copy in the headers provided with gcc. |
1293 | # The sed command gets just the last file name component; | |
1294 | # this is necessary because VPATH could add a dirname. | |
1295 | # Using basename would be simpler, but some systems don't have it. | |
1296 | objdir=`pwd`; \ | |
1297 | cd $(srcdir); \ | |
1298 | for file in $(USER_H); do \ | |
1299 | realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \ | |
b5850e21 | 1300 | rm -f $$objdir/include/$$realfile; \ |
2cfd79fe | 1301 | cp $$realfile $$objdir/include; \ |
1302 | chmod a+r $$objdir/include/$$realfile; \ | |
1303 | done | |
b5850e21 | 1304 | rm -f include/syslimits.h |
13361668 | 1305 | if [ -f include/limits.h ]; then \ |
13361668 | 1306 | mv include/limits.h include/syslimits.h; \ |
2cfd79fe | 1307 | else \ |
13361668 | 1308 | cp $(srcdir)/gsyslimits.h include/syslimits.h; \ |
2cfd79fe | 1309 | fi |
1310 | chmod a+r include/syslimits.h | |
b5850e21 | 1311 | rm -f include/varargs.h |
2cfd79fe | 1312 | cp $(srcdir)/gvarargs.h include/varargs.h |
1313 | chmod a+r include/varargs.h | |
b5850e21 | 1314 | rm -f include/stdarg.h |
2cfd79fe | 1315 | cp $(srcdir)/gstdarg.h include/stdarg.h |
1316 | chmod a+r include/stdarg.h | |
b5850e21 | 1317 | rm -f include/stddef.h |
2cfd79fe | 1318 | cp $(srcdir)/gstddef.h include/stddef.h |
1319 | chmod a+r include/stddef.h | |
b5850e21 | 1320 | rm -f include/limits.h |
2cfd79fe | 1321 | cp xlimits.h include/limits.h |
1322 | chmod a+r include/limits.h | |
b5850e21 | 1323 | rm -f include/float.h |
d82b9c93 | 1324 | cp gfloat.h include/float.h |
2cfd79fe | 1325 | chmod a+r include/float.h |
1326 | # Install the README | |
b5850e21 | 1327 | rm -f include/README |
2cfd79fe | 1328 | cp $(srcdir)/README-fixinc include/README |
1329 | chmod a+r include/README | |
1330 | touch stmp-headers | |
1331 | ||
1332 | # Build fixed copies of system files. | |
9e74f24f | 1333 | stmp-fixinc: $(srcdir)/$(FIXINCLUDES) |
2cfd79fe | 1334 | rm -rf include |
1335 | mkdir include | |
92d223d1 | 1336 | if [ x$(FIXINCLUDES) != xMakefile.in ]; \ |
6848a9c6 | 1337 | then \ |
1338 | for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \ | |
1339 | if [ -d $$dir ]; \ | |
1340 | then \ | |
1341 | $(srcdir)/$(FIXINCLUDES) include $$dir $(srcdir); \ | |
1342 | else true; fi; \ | |
92d223d1 | 1343 | done; \ |
6848a9c6 | 1344 | else true; \ |
1345 | fi | |
9e74f24f | 1346 | touch stmp-fixinc |
2cfd79fe | 1347 | \f |
32e6d418 | 1348 | # Remake the info files. |
1349 | ||
6c76e6ec | 1350 | doc: $(srcdir)/cpp.info $(srcdir)/gcc.info |
32e6d418 | 1351 | |
630c76ba | 1352 | $(srcdir)/cpp.info: cpp.texi |
bc51108a | 1353 | $(MAKEINFO) `echo $(srcdir)/cpp.texi | sed 's,^\./,,'` |
32e6d418 | 1354 | |
630c76ba | 1355 | #$(srcdir)/gplus.info: gplus.texi |
bc51108a | 1356 | # $(MAKEINFO) `echo $(srcdir)/gplus.texi | sed 's,^\./,,'` |
32e6d418 | 1357 | |
630c76ba | 1358 | $(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \ |
1359 | md.texi rtl.texi tm.texi | |
bc51108a | 1360 | $(MAKEINFO) `echo $(srcdir)/gcc.texi | sed 's,^\./,,'` |
630c76ba | 1361 | |
64616031 | 1362 | # This works with GNU Make's default rule. |
1363 | $(srcdir)/gcc.dvi: gcc.texi extend.texi install.texi invoke.texi \ | |
1364 | md.texi rtl.texi tm.texi | |
1365 | ||
1366 | # This works with GNU Make's default rule. | |
1367 | $(srcdir)/cpp.dvi: cpp.texi | |
1368 | ||
630c76ba | 1369 | $(srcdir)/INSTALL: install1.texi install.texi |
bc51108a | 1370 | $(MAKEINFO) -D INSTALLONLY --no-header `echo $(srcdir)/install1.texi | sed 's,^\./,,'` |
32e6d418 | 1371 | \f |
1372 | # Deletion of files made during compilation. | |
1373 | # There are four levels of this: | |
79f818d0 | 1374 | # `mostlyclean', `clean', `distclean' and `realclean'. |
32e6d418 | 1375 | # `mostlyclean' is useful while working on a particular type of machine. |
c6396a0b | 1376 | # It deletes most, but not all, of the files made by compilation. |
32e6d418 | 1377 | # It does not delete libgcc.a or its parts, so it won't have to be recompiled. |
c6396a0b | 1378 | # `clean' deletes everything made by running `make all'. |
79f818d0 | 1379 | # `distclean' also deletes the files made by config. |
32e6d418 | 1380 | # `realclean' also deletes everything that could be regenerated automatically. |
1381 | ||
79f818d0 | 1382 | |
32e6d418 | 1383 | mostlyclean: |
1384 | -rm -f $(STAGESTUFF) | |
343505c4 | 1385 | # Clean the objc subdir if we created one. |
1386 | if [ -d objc ]; then \ | |
1387 | srcdir1=`cd $(srcdir); pwd`; \ | |
8c6da369 | 1388 | cd objc; $(MAKE) -f $$srcdir1/objc/Makefile mostlyclean; \ |
343505c4 | 1389 | else true; fi |
bd594491 | 1390 | -rm -f libobjc.a |
32e6d418 | 1391 | # Delete the temporary source copies for cross compilation. |
1392 | -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c | |
1393 | -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c | |
1394 | -rm -f $(HOST_PREFIX_1)obstack.c | |
1395 | # Delete the temp files made in the course of building libgcc.a. | |
590613c7 | 1396 | -rm -f tmplibgcc* tmpcopy xlimits.h |
32e6d418 | 1397 | for name in $(LIB1FUNCS); do rm -f $${name}.c; done |
1398 | # Delete other temporary files. | |
83bd2d97 | 1399 | -rm -f tmp-float.h tmp-gcc.xtar.Z |
f678532a | 1400 | -rm -f tmp-foo1 tmp-foo2 tmp-proto.* tmp-unproto.1 tmp-SYSCALLS.s |
32e6d418 | 1401 | # Delete the stamp files. |
1402 | -rm -f stamp-* tmp-* | |
c6396a0b | 1403 | # Delete debugging dump files. |
32e6d418 | 1404 | -rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop |
c6396a0b | 1405 | -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack |
1406 | # Delete some files made during installation. | |
d82b9c93 | 1407 | -rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c |
79f818d0 | 1408 | -rm -f collect collect2 ld mips-tfile mips-tdump alloca.s |
c6396a0b | 1409 | # Delete unwanted output files from TeX. |
1410 | -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg | |
79f818d0 | 1411 | # Delete sorted indices we don't actually use. |
1412 | -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns | |
c6396a0b | 1413 | # Delete core dumps. |
8d14a5ba | 1414 | -rm -f core config/core |
32e6d418 | 1415 | |
79f818d0 | 1416 | # Delete all files made by compilation |
1417 | # that don't exist in the distribution. | |
32e6d418 | 1418 | clean: mostlyclean |
8bd8ea06 | 1419 | # It may not be quite desirable to delete unprotoize.c here, |
1420 | # but the spec for `make clean' requires it. | |
1421 | # Using unprotoize.c is not quite right in the first place, | |
1422 | # but what better way is there? | |
840a6e8d | 1423 | -rm -f libgcc.a libgcc1.a libgcc2.a libgcc2.ready libgcc1.null |
131b361e | 1424 | -rm -f *.dvi |
2cfd79fe | 1425 | # Delete the include directory. |
1426 | -rm -rf stmp-* include | |
32e6d418 | 1427 | |
79f818d0 | 1428 | # Delete all files that users would normally create |
1429 | # while building and installing GCC. | |
c6396a0b | 1430 | distclean: clean |
7267fd67 | 1431 | -rm -f tm.h aux-output.c config.h md config.status tconfig.h hconfig.h |
ab866dde | 1432 | -rm -f Makefile *.oaux |
79f818d0 | 1433 | -rm -fr stage1 stage2 stage3 stage4 |
c6396a0b | 1434 | |
1435 | # Delete anything likely to be found in the source directory | |
1436 | # that shouldn't be in the distribution. | |
1437 | extraclean: distclean | |
bbbdbddd | 1438 | -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~* |
131b361e | 1439 | -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej |
a0b2dfb4 | 1440 | -rm -f *.dvi *.oaux *.d *.Z *.tar *.xtar *diff |
8d14a5ba | 1441 | -rm -f *lose config/*lose |
3a0781a0 | 1442 | -rm -f *.s *.s[0-9] *.i install1.texi config/ChangeLog |
32e6d418 | 1443 | |
1444 | # Get rid of every file that's generated from some other file. | |
1445 | # Most of these files ARE PRESENT in the GCC distribution. | |
c6396a0b | 1446 | realclean: distclean |
c373bd56 | 1447 | -rm -f c-parse.y objc-parse.y |
32e6d418 | 1448 | -rm -f cp-parse.c cp-parse.h cp-parse.output |
1449 | -rm -f objc-parse.c objc-parse.output | |
32e6d418 | 1450 | -rm -f c-parse.c c-parse.h c-parse.output |
1451 | -rm -f cexp.c cexp.output TAGS | |
c6396a0b | 1452 | -rm -f cpp.info* cpp.??s cpp.*aux |
1453 | -rm -f gcc.info* gcc.??s gcc.*aux | |
1454 | -rm -f gplus.info* gplus.??s gplus.*aux | |
32e6d418 | 1455 | \f |
1456 | # Entry points `install' and `uninstall'. | |
c6396a0b | 1457 | # Also use `install-collect2' to install collect2 when the config files don't. |
32e6d418 | 1458 | |
3f69fed5 | 1459 | # The semicolon is to prevent the install.sh -> install default rule |
876dc5b0 | 1460 | # from doing anything. Having it run true helps avoid problems and |
1461 | # noise from versions of make which don't like to have null commands. | |
c2a18965 | 1462 | install: $(INSTALL_TARGET) ; @true |
32e6d418 | 1463 | |
2cfd79fe | 1464 | # Copy the compiler files into directories where they will be run. |
1465 | install-normal: install-common install-libgcc $(INSTALL_HEADERS) install-man | |
32e6d418 | 1466 | |
e77fd588 | 1467 | # Do nothing while making gcc with a cross-compiler. The person who |
1468 | # makes gcc for the target machine has to know how to put a complete | |
1469 | # gcc together by hand. | |
1470 | install-build: force | |
1471 | @echo You have to install gcc on your target machine by hand. | |
1472 | ||
32e6d418 | 1473 | # Run this on the target machine |
1474 | # to finish installation of cross compiler. | |
1475 | install-cross-rest: install-float-h-cross | |
1476 | ||
1477 | # Install float.h for cross compiler. | |
1478 | # Run this on the target machine! | |
1479 | install-float-h-cross: | |
9f10de4b | 1480 | # if [ -f enquire ] ; then true; else false; fi |
1481 | # Note: don't use -. We should fail right away if enquire was not made. | |
1482 | ./enquire -f > $(tmpdir)/float.h | |
32e6d418 | 1483 | -rm -f $(libsubdir)/include/float.h |
f32abccb | 1484 | $(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h |
1485 | -rm -f $(tmpdir)/float.h | |
32e6d418 | 1486 | chmod a-x $(libsubdir)/include/float.h |
1487 | ||
1488 | # Create the installation directory. | |
1489 | install-dir: | |
2388f67d | 1490 | -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi |
1491 | -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; fi | |
d0561ed0 | 1492 | # This dir isn't curretly searched by cpp. |
1493 | # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; fi | |
2388f67d | 1494 | -if [ -d $(libdir)/gcc-lib/$(target) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target) ; fi |
1495 | -if [ -d $(libdir)/gcc-lib/$(target)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version) ; fi | |
630c76ba | 1496 | -if [ -d $(libdir)/gcc-lib/$(target)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version)/include ; fi |
2388f67d | 1497 | -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi |
69184f78 | 1498 | -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; fi |
3ecfbab6 | 1499 | -if [ -f gcc-cross ] ; \ |
10b27eb7 | 1500 | then \ |
fea00636 | 1501 | if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; fi ; \ |
10b27eb7 | 1502 | if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; fi ; \ |
3ecfbab6 | 1503 | else true; \ |
1504 | fi | |
32e6d418 | 1505 | # We don't use mkdir -p to create the parents of mandir, |
1506 | # because some systems don't support it. | |
1507 | # Instead, we use this technique to create the immediate parent of mandir. | |
2388f67d | 1508 | -parent=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \ |
32e6d418 | 1509 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi |
1510 | -if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; fi | |
1511 | ||
1512 | # Install the compiler executables built during cross compilation. | |
90c04b70 | 1513 | # Deps on $(srcdir)/g++ $(srcdir)/c++ would be natural here, |
1514 | # but the latter would get confused with the target `c++'. | |
1515 | install-common: native install-dir xgcc $(EXTRA_PARTS) | |
32e6d418 | 1516 | for file in $(COMPILERS); do \ |
1517 | if [ -f $$file ] ; then \ | |
1518 | rm -f $(libsubdir)/$$file; \ | |
1519 | $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \ | |
1520 | else true; \ | |
1521 | fi; \ | |
1522 | done | |
79f818d0 | 1523 | for file in $(EXTRA_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \ |
32e6d418 | 1524 | if [ x"$$file" != x.. ]; then \ |
1525 | rm -f $(libsubdir)/$$file; \ | |
1526 | $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \ | |
1527 | else true; fi; \ | |
1528 | done | |
8a4b1e01 | 1529 | # Don't mess with specs if it doesn't exist yet. |
94c53b91 | 1530 | -if [ -f specs ] ; then \ |
1531 | rm -f $(libsubdir)/specs; \ | |
8a4b1e01 | 1532 | $(INSTALL_DATA) specs $(libsubdir)/specs; \ |
1533 | fi | |
32e6d418 | 1534 | # Install the driver program as gcc-$(target) |
1535 | # and also as either gcc (if native) or $(tooldir)/bin/gcc. | |
1536 | -if [ -f gcc-cross ] ; then \ | |
c6396a0b | 1537 | $(INSTALL_PROGRAM) gcc-cross $(bindir)/gcc-$(target); \ |
32e6d418 | 1538 | if [ -d $(tooldir)/bin/. ] ; then \ |
1539 | rm -f $(tooldir)/bin/gcc; \ | |
1540 | $(INSTALL_PROGRAM) gcc-cross $(tooldir)/bin/gcc; \ | |
32e6d418 | 1541 | else true; fi; \ |
1542 | else \ | |
1543 | rm -f $(bindir)/gcc; \ | |
77a164d8 | 1544 | $(INSTALL_PROGRAM) xgcc $(bindir)/gcc; \ |
32e6d418 | 1545 | rm -f $(bindir)/gcc-$(target)-1; \ |
1546 | ln $(bindir)/gcc $(bindir)/gcc-$(target)-1; \ | |
1547 | mv $(bindir)/gcc-$(target)-1 $(bindir)/gcc-$(target); \ | |
1548 | fi | |
9cee99f7 | 1549 | # Install protoize if it was compiled. |
ae0fea3a | 1550 | -if [ -f protoize ]; \ |
9cee99f7 | 1551 | then \ |
1552 | rm -f $(bindir)/protoize; \ | |
1553 | $(INSTALL_PROGRAM) protoize $(bindir)/protoize; \ | |
1554 | rm -f $(bindir)/unprotoize; \ | |
1555 | $(INSTALL_PROGRAM) unprotoize $(bindir)/unprotoize; \ | |
1556 | rm -f $(libsubdir)/SYSCALLS.c.X; \ | |
1557 | $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \ | |
1558 | chmod a-x $(libsubdir)/SYSCALLS.c.X; \ | |
1559 | fi | |
1fe386e3 | 1560 | -if [ -f cc1plus ] ; then \ |
1561 | rm -f $(bindir)/c++ ; \ | |
1562 | $(INSTALL_PROGRAM) $(srcdir)/c++ $(bindir)/c++ ; \ | |
1563 | rm -f $(bindir)/g++ ; \ | |
1564 | $(INSTALL_PROGRAM) $(srcdir)/g++ $(bindir)/g++ ; \ | |
1565 | fi | |
32e6d418 | 1566 | -rm -f $(libsubdir)/cpp |
1567 | $(INSTALL_PROGRAM) cpp $(libsubdir)/cpp | |
1568 | ||
32e6d418 | 1569 | # Install the man pages. |
77a164d8 | 1570 | install-man: install-dir $(srcdir)/gcc.1 $(srcdir)/cccp.1 $(srcdir)/g++.1 |
32e6d418 | 1571 | -rm -f $(mandir)/gcc$(manext) |
ab866dde | 1572 | -$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/gcc$(manext) |
1573 | -chmod a-x $(mandir)/gcc$(manext) | |
c6396a0b | 1574 | -rm -f $(mandir)/cccp$(manext) |
ab866dde | 1575 | -$(INSTALL_DATA) $(srcdir)/cccp.1 $(mandir)/cccp$(manext) |
1576 | -chmod a-x $(mandir)/cccp$(manext) | |
ab866dde | 1577 | -$(INSTALL_DATA) $(srcdir)/g++.1 $(mandir)/g++$(manext) |
1578 | -chmod a-x $(mandir)/g++$(manext) | |
32e6d418 | 1579 | |
1580 | # Install the library. | |
807a86f6 | 1581 | install-libgcc: libgcc.a install-dir |
32e6d418 | 1582 | -if [ -f libgcc.a ] ; then \ |
1583 | rm -f $(libsubdir)/libgcc.a; \ | |
1584 | $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \ | |
1585 | if $(RANLIB_TEST) ; then \ | |
1586 | (cd $(libsubdir); $(RANLIB) libgcc.a); else true; fi; \ | |
1587 | chmod a-x $(libsubdir)/libgcc.a; \ | |
1588 | else true; fi | |
1589 | ||
f32abccb | 1590 | # Install the objc run time library. |
1591 | install-libobjc: libobjc.a install-dir | |
1592 | -if [ -f libobjc.a ] ; then \ | |
1593 | rm -f $(libsubdir)/libobjc.a; \ | |
1594 | $(INSTALL_DATA) libobjc.a $(libsubdir)/libobjc.a; \ | |
1595 | if $(RANLIB_TEST) ; then \ | |
1596 | (cd $(libsubdir); $(RANLIB) libobjc.a); else true; fi; \ | |
1597 | chmod a-x $(libsubdir)/libobjc.a; \ | |
1598 | else true; fi | |
1599 | ||
2cfd79fe | 1600 | # Install all the header files built in the include subdirectory. |
1601 | install-headers: install-include-dir $(INSTALL_HEADERS_DIR) install-assert-h | |
1602 | # Fix symlinks to absolute paths in the installed include directory to | |
1603 | # point to the installed directory, not the build directory. | |
1604 | -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \ | |
1605 | if [ $$? -eq 0 ]; then \ | |
1606 | dir=`cd include; pwd`; \ | |
1607 | for i in $$files; do \ | |
1608 | dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \ | |
1609 | if expr "$$dest" : "$$dir.*" > /dev/null; then \ | |
1610 | rm -f $(libsubdir)/include/$$i; \ | |
5822e312 | 1611 | ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \ |
2cfd79fe | 1612 | fi; \ |
1613 | done; \ | |
1614 | fi | |
32e6d418 | 1615 | |
2cfd79fe | 1616 | # Create or recreate the gcc private include file directory. |
2fc395f6 | 1617 | install-include-dir: install-dir |
2cfd79fe | 1618 | -rm -rf $(libsubdir)/include |
1619 | mkdir $(libsubdir)/include | |
1620 | -chmod a+rx $(libsubdir)/include | |
1621 | ||
1622 | # Install the include directory using tar. | |
1623 | install-headers-tar: stmp-headers install-include-dir | |
bea171c6 | 1624 | cd include; tar cf - . | (cd $(libsubdir)/include; tar xpBf - ) |
2cfd79fe | 1625 | |
1626 | # Install the include directory using cpio. | |
1627 | install-headers-cpio: stmp-headers install-include-dir | |
bea171c6 | 1628 | cd include; find . -print | cpio -pdum $(libsubdir)/include |
32e6d418 | 1629 | |
88d74741 | 1630 | # Put assert.h in /usr/local/include, so it won't override GNU libc's assert.h. |
1631 | # Don't replace the assert.h already there if it is not from GCC. | |
eb5a0caa | 1632 | # This code would be simpler if it tested for -f ... && ! grep ... |
1633 | # but supposedly the ! operator is missing in sh on some systems. | |
2cfd79fe | 1634 | install-assert-h: assert.h install-dir |
eb5a0caa | 1635 | if [ -f $(assertdir)/assert.h ]; \ |
1636 | then \ | |
95856242 | 1637 | if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \ |
a953974c | 1638 | then \ |
eb5a0caa | 1639 | rm -f $(assertdir)/assert.h; \ |
1640 | $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \ | |
04873c54 | 1641 | chmod a-x $(assertdir)/assert.h; \ |
eb5a0caa | 1642 | else true; \ |
1643 | fi; \ | |
2ba284c3 | 1644 | else \ |
db9a0b19 | 1645 | rm -f $(assertdir)/assert.h; \ |
1646 | $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \ | |
04873c54 | 1647 | chmod a-x $(assertdir)/assert.h; \ |
2ba284c3 | 1648 | fi |
32e6d418 | 1649 | |
c6396a0b | 1650 | # Use this target to install the program `collect2' under the name `ld'. |
1651 | install-collect2: collect2 | |
1652 | $(INSTALL_PROGRAM) collect2 $(libsubdir)/ld | |
1653 | # Install the driver program as $(libsubdir)/gcc for collect2. | |
77a164d8 | 1654 | $(INSTALL_PROGRAM) xgcc $(libsubdir)/gcc |
c6396a0b | 1655 | |
32e6d418 | 1656 | # Cancel installation by deleting the installed files. |
1657 | uninstall: | |
1658 | -rm -rf $(libsubdir) | |
1659 | -rm -rf $(bindir)/gcc | |
32e6d418 | 1660 | -rm -rf $(bindir)/protoize |
1661 | -rm -rf $(bindir)/unprotoize | |
1662 | -rm -rf $(mandir)/gcc$(manext) | |
3b50af09 | 1663 | -rm -rf $(mandir)/g++$(manext) |
c6396a0b | 1664 | -rm -rf $(mandir)/cccp$(manext) |
32e6d418 | 1665 | -rm -rf $(mandir)/protoize$(manext) |
1666 | -rm -rf $(mandir)/unprotoize$(manext) | |
1667 | \f | |
1668 | # These exist for maintenance purposes. | |
1669 | ||
1670 | # Update the tags table. | |
1671 | TAGS: force | |
1672 | cd $(srcdir); \ | |
1673 | mkdir temp; \ | |
8c1b3852 | 1674 | mv -f c-parse.[ch] cp-parse.[ch] objc-parse.c cexp.c =*.[chy] temp; \ |
32e6d418 | 1675 | etags *.y *.h *.c; \ |
1676 | mv temp/* .; \ | |
1677 | rmdir temp | |
1678 | ||
1679 | # Create the distribution tar file. | |
1680 | #dist: gcc-$(version).tar.Z | |
1681 | dist: gcc.xtar.Z | |
1682 | ||
c6396a0b | 1683 | gcc.xtar.Z: gcc.xtar |
32e6d418 | 1684 | compress < gcc.xtar > tmp-gcc.xtar.Z |
1685 | mv tmp-gcc.xtar.Z gcc.xtar.Z | |
1686 | ||
1687 | #gcc-$(version).tar.Z: gcc-$(version).tar | |
1688 | # compress < gcc-$(version).tar > gcc-$(version).tar.Z | |
1689 | ||
1690 | #gcc-$(version).tar: | |
6c76e6ec | 1691 | gcc.xtar: distdir |
1692 | # Make the distribution. | |
1693 | tar chf gcc.xtar gcc-$(version) | |
1694 | ||
3b50af09 | 1695 | distdir: doc $(srcdir)/INSTALL c-parse.y objc-parse.y cp-parse.y \ |
1696 | c-parse.c cp-parse.c objc-parse.c cexp.c | |
630c76ba | 1697 | if grep -s "for version ${version}" gcc.texi; \ |
1698 | then true; \ | |
0dce1b01 | 1699 | else echo "You must update the version number in \`gcc.texi'"; sleep 10;\ |
630c76ba | 1700 | fi |
131b361e | 1701 | # Update the version number in README |
1702 | awk '$$1 " " $$2 " " $$3 == "This directory contains" \ | |
1703 | { $$6 = version; print $$0 } \ | |
1704 | $$1 " " $$2 " " $$3 != "This directory contains"' \ | |
1705 | version=$(version) README > tmp.README | |
1706 | mv tmp.README README | |
c6396a0b | 1707 | -rm -rf gcc-$(version) tmp |
32e6d418 | 1708 | # Put all the files in a temporary subdirectory |
1709 | # which has the name that we want to have in the tar file. | |
c6396a0b | 1710 | mkdir tmp |
1711 | mkdir tmp/config | |
4f1fd857 | 1712 | mkdir tmp/objc |
c6396a0b | 1713 | for file in *[0-9a-zA-Z+]; do \ |
131b361e | 1714 | ln $$file tmp > /dev/null 2>&1 || cp $$file tmp; \ |
c6396a0b | 1715 | done |
1716 | cd config; \ | |
1717 | for file in *[0-9a-zA-Z+]; do \ | |
131b361e | 1718 | ln $$file ../tmp/config >/dev/null 2>&1 || cp $$file ../tmp/config; \ |
32e6d418 | 1719 | done |
4f1fd857 | 1720 | cd objc; \ |
1721 | for file in *[0-9a-zA-Z+]; do \ | |
e77fd588 | 1722 | ln $$file ../tmp/objc >/dev/null 2>&1 || cp $$file ../tmp/objc; \ |
4f1fd857 | 1723 | done |
c6396a0b | 1724 | ln .gdbinit tmp |
1725 | mv tmp gcc-$(version) | |
32e6d418 | 1726 | # Get rid of everything we don't want in the distribution. |
c6396a0b | 1727 | cd gcc-$(version); make -f Makefile.in extraclean |
32e6d418 | 1728 | |
1729 | # do make -f ../gcc/Makefile maketest DIR=../gcc | |
1730 | # in the intended test directory to make it a suitable test directory. | |
1731 | # THIS IS OBSOLETE; use the -srcdir operand in configure instead. | |
1732 | maketest: | |
1733 | ln -s $(DIR)/*.[chy] . | |
1734 | ln -s $(DIR)/configure . | |
1735 | ln -s $(DIR)/*.def . | |
1736 | -rm -f =* | |
1737 | ln -s $(DIR)/.gdbinit . | |
1738 | ln -s $(DIR)/$(FIXINCLUDES) . | |
1739 | -ln -s $(DIR)/bison.simple . | |
1740 | ln -s $(DIR)/config . | |
1741 | ln -s $(DIR)/move-if-change . | |
1742 | # The then and else were swapped to avoid a problem on Ultrix. | |
1743 | if [ ! -f Makefile ] ; then ln -s $(DIR)/Makefile .; else false; fi | |
1744 | -rm tm.h aux-output.c config.h md | |
1745 | make clean | |
1746 | # You must then run config to set up for compilation. | |
77a164d8 | 1747 | |
41f63c60 | 1748 | bootstrap: force |
1749 | # Only build the C compiler for stage1, because that is the only one that | |
1750 | # we can guarantee will build with the native compiler, and also it is the | |
1751 | # only thing useful for building stage2. | |
3ef0efe3 | 1752 | $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES=c |
32e6d418 | 1753 | $(MAKE) stage1 |
c6396a0b | 1754 | # This used to define ALLOCA as empty, but that would lead to bad results |
1755 | # for a subsequent `make install' since that would not have ALLOCA empty. | |
1756 | # To prevent `make install' from compiling alloca.o and then relinking cc1 | |
1757 | # because alloca.o is newer, we permit these recursive makes to compile | |
1758 | # alloca.o. Then cc1 is newer, so it won't have to be relinked. | |
12343c6a | 1759 | $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)" |
32e6d418 | 1760 | $(MAKE) stage2 |
12343c6a | 1761 | $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)" |
32e6d418 | 1762 | |
1763 | bootstrap2: force | |
12343c6a | 1764 | $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)" |
32e6d418 | 1765 | $(MAKE) stage2 |
12343c6a | 1766 | $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)" |
32e6d418 | 1767 | |
1768 | bootstrap3: force | |
12343c6a | 1769 | $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)" |
32e6d418 | 1770 | |
48c6936b | 1771 | # Compare the object files in the current directory with those in the |
1772 | # stage2 directory. | |
1773 | ||
1774 | compare: force | |
1775 | for file in *.o; do \ | |
77a164d8 | 1776 | tail +16c $$file > tmp-foo1; \ |
1777 | tail +16c stage2/$$file > tmp-foo2 2>/dev/null \ | |
1778 | && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \ | |
48c6936b | 1779 | done |
1780 | -rm -f tmp-foo* | |
1781 | ||
1782 | # Similar, but compare with stage3 directory | |
1783 | compare3: force | |
1784 | for file in *.o; do \ | |
77a164d8 | 1785 | tail +16c $$file > tmp-foo1; \ |
1786 | tail +16c stage3/$$file > tmp-foo2 2>/dev/null \ | |
1787 | && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \ | |
48c6936b | 1788 | done |
1789 | -rm -f tmp-foo* | |
1790 | ||
32e6d418 | 1791 | # Copy the object files from a particular stage into a subdirectory. |
1792 | stage1: force | |
c6396a0b | 1793 | -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi |
32e6d418 | 1794 | -mv $(STAGESTUFF) stage1 |
1795 | -rm -f stage1/libgcc.a | |
1796 | -cp libgcc.a stage1 | |
1797 | -if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi | |
1798 | ||
1799 | stage2: force | |
c6396a0b | 1800 | -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi |
32e6d418 | 1801 | -mv $(STAGESTUFF) stage2 |
1802 | -rm -f stage2/libgcc.a | |
1803 | -cp libgcc.a stage2 | |
1804 | -if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi | |
1805 | ||
1806 | stage3: force | |
2388f67d | 1807 | -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi |
32e6d418 | 1808 | -mv $(STAGESTUFF) stage3 |
1809 | -rm -f stage3/libgcc.a | |
1810 | -cp libgcc.a stage3 | |
1811 | -if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi | |
1812 | ||
1813 | stage4: force | |
2388f67d | 1814 | -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi |
32e6d418 | 1815 | -mv $(STAGESTUFF) stage4 |
1816 | -rm -f stage4/libgcc.a | |
1817 | -cp libgcc.a stage4 | |
1818 | -if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi | |
1819 | ||
1820 | # Copy just the executable files from a particular stage into a subdirectory, | |
1821 | # and delete the object files. Use this if you're just verifying a version | |
1822 | # that is pretty sure to work, and you are short of disk space. | |
1823 | risky-stage1: force | |
2388f67d | 1824 | -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi |
e650197c | 1825 | -mv $(GCC_PARTS) stage1 |
32e6d418 | 1826 | -rm -f stage1/libgcc.a |
1827 | -cp libgcc.a stage1 && $(RANLIB) stage1/libgcc.a | |
1828 | -make clean | |
1829 | ||
1830 | risky-stage2: force | |
2388f67d | 1831 | -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi |
e650197c | 1832 | -mv $(GCC_PARTS) stage2 |
32e6d418 | 1833 | -rm -f stage2/libgcc.a |
1834 | -cp libgcc.a stage2 && $(RANLIB) stage2/libgcc.a | |
1835 | -make clean | |
1836 | ||
1837 | risky-stage3: force | |
2388f67d | 1838 | -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi |
e650197c | 1839 | -mv $(GCC_PARTS) stage3 |
32e6d418 | 1840 | -rm -f stage3/libgcc.a |
1841 | -cp libgcc.a stage3 && $(RANLIB) stage3/libgcc.a | |
1842 | -make clean | |
1843 | ||
1844 | risky-stage4: force | |
2388f67d | 1845 | -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi |
e650197c | 1846 | -mv $(GCC_PARTS) stage4 |
32e6d418 | 1847 | -rm -f stage4/libgcc.a |
1848 | -cp libgcc.a stage4 && $(RANLIB) stage4/libgcc.a | |
1849 | -make clean | |
1850 | ||
1851 | #In GNU Make, ignore whether `stage*' exists. | |
1852 | .PHONY: stage1 stage2 stage3 stage4 clean realclean TAGS bootstrap | |
1853 | .PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4 | |
1854 | ||
1855 | force: |