]>
Commit | Line | Data |
---|---|---|
0975678f | 1 | @c Copyright (C) 1988,1989,1992,1993,1994,1996,1998,1999,2000,2001,2002 Free Software Foundation, Inc. |
c1f7febf RK |
2 | @c This is part of the GCC manual. |
3 | @c For copying conditions, see the file gcc.texi. | |
4 | ||
fe203faf RH |
5 | @node C Implementation |
6 | @chapter C Implementation-defined behavior | |
7 | @cindex implementation-defined behavior, C language | |
8 | ||
9 | A conforming implementation of ISO C is required to document its | |
10 | choice of behavior in each of the areas that are designated | |
11 | ``implementation defined.'' The following lists all such areas, | |
12 | along with the section number from the ISO/IEC 9899:1999 standard. | |
13 | ||
14 | @menu | |
15 | * Translation implementation:: | |
16 | * Environment implementation:: | |
17 | * Identifiers implementation:: | |
18 | * Characters implementation:: | |
19 | * Integers implementation:: | |
20 | * Floating point implementation:: | |
21 | * Arrays and pointers implementation:: | |
22 | * Hints implementation:: | |
23 | * Structures unions enumerations and bit-fields implementation:: | |
24 | * Qualifiers implementation:: | |
25 | * Preprocessing directives implementation:: | |
26 | * Library functions implementation:: | |
27 | * Architecture implementation:: | |
28 | * Locale-specific behavior implementation:: | |
29 | @end menu | |
30 | ||
31 | @node Translation implementation | |
32 | @section Translation | |
33 | ||
34 | @itemize @bullet | |
35 | @item | |
36 | @cite{How a diagnostic is identified (3.10, 5.1.1.3).} | |
37 | ||
38 | @item | |
39 | @cite{Whether each nonempty sequence of white-space characters other than | |
40 | new-line is retained or replaced by one space character in translation | |
41 | phase 3 (5.1.1.2).} | |
42 | @end itemize | |
43 | ||
44 | @node Environment implementation | |
45 | @section Environment | |
46 | ||
0c688a7d | 47 | The behavior of these points are dependent on the implementation |
fe203faf RH |
48 | of the C library, and are not defined by GCC itself. |
49 | ||
50 | @node Identifiers implementation | |
51 | @section Identifiers | |
52 | ||
53 | @itemize @bullet | |
54 | @item | |
55 | @cite{Which additional multibyte characters may appear in identifiers | |
56 | and their correspondence to universal character names (6.4.2).} | |
57 | ||
58 | @item | |
59 | @cite{The number of significant initial characters in an identifier | |
60 | (5.2.4.1, 6.4.2).} | |
61 | @end itemize | |
62 | ||
63 | @node Characters implementation | |
64 | @section Characters | |
65 | ||
66 | @itemize @bullet | |
67 | @item | |
68 | @cite{The number of bits in a byte (3.6).} | |
69 | ||
70 | @item | |
71 | @cite{The values of the members of the execution character set (5.2.1).} | |
72 | ||
73 | @item | |
74 | @cite{The unique value of the member of the execution character set produced | |
75 | for each of the standard alphabetic escape sequences (5.2.2).} | |
76 | ||
77 | @item | |
78 | @cite{The value of a @code{char} object into which has been stored any | |
79 | character other than a member of the basic execution character set (6.2.5).} | |
80 | ||
81 | @item | |
82 | @cite{Which of @code{signed char} or @code{unsigned char} has the same range, | |
39ffd3cb | 83 | representation, and behavior as ``plain'' @code{char} (6.2.5, 6.3.1.1).} |
fe203faf RH |
84 | |
85 | @item | |
86 | @cite{The mapping of members of the source character set (in character | |
87 | constants and string literals) to members of the execution character | |
88 | set (6.4.4.4, 5.1.1.2).} | |
89 | ||
90 | @item | |
91 | @cite{The value of an integer character constant containing more than one | |
92 | character or containing a character or escape sequence that does not map | |
93 | to a single-byte execution character (6.4.4.4).} | |
94 | ||
95 | @item | |
96 | @cite{The value of a wide character constant containing more than one | |
97 | multibyte character, or containing a multibyte character or escape | |
98 | sequence not represented in the extended execution character set (6.4.4.4).} | |
99 | ||
100 | @item | |
101 | @cite{The current locale used to convert a wide character constant consisting | |
102 | of a single multibyte character that maps to a member of the extended | |
103 | execution character set into a corresponding wide character code (6.4.4.4).} | |
104 | ||
105 | @item | |
106 | @cite{The current locale used to convert a wide string literal into | |
107 | corresponding wide character codes (6.4.5).} | |
108 | ||
109 | @item | |
110 | @cite{The value of a string literal containing a multibyte character or escape | |
111 | sequence not represented in the execution character set (6.4.5).} | |
112 | @end itemize | |
113 | ||
114 | @node Integers implementation | |
115 | @section Integers | |
116 | ||
117 | @itemize @bullet | |
118 | @item | |
119 | @cite{Any extended integer types that exist in the implementation (6.2.5).} | |
120 | ||
121 | @item | |
122 | @cite{Whether signed integer types are represented using sign and magnitude, | |
123 | two's complement, or one's complement, and whether the extraordinary value | |
124 | is a trap representation or an ordinary value (6.2.6.2).} | |
125 | ||
126 | @item | |
127 | @cite{The rank of any extended integer type relative to another extended | |
128 | integer type with the same precision (6.3.1.1).} | |
129 | ||
130 | @item | |
131 | @cite{The result of, or the signal raised by, converting an integer to a | |
132 | signed integer type when the value cannot be represented in an object of | |
133 | that type (6.3.1.3).} | |
134 | ||
135 | @item | |
136 | @cite{The results of some bitwise operations on signed integers (6.5).} | |
137 | @end itemize | |
138 | ||
139 | @node Floating point implementation | |
140 | @section Floating point | |
141 | ||
142 | @itemize @bullet | |
143 | @item | |
144 | @cite{The accuracy of the floating-point operations and of the library | |
39ffd3cb | 145 | functions in @code{<math.h>} and @code{<complex.h>} that return floating-point |
fe203faf RH |
146 | results (5.2.4.2.2).} |
147 | ||
148 | @item | |
149 | @cite{The rounding behaviors characterized by non-standard values | |
9c34dbbf ZW |
150 | of @code{FLT_ROUNDS} @gol |
151 | (5.2.4.2.2).} | |
fe203faf RH |
152 | |
153 | @item | |
154 | @cite{The evaluation methods characterized by non-standard negative | |
155 | values of @code{FLT_EVAL_METHOD} (5.2.4.2.2).} | |
156 | ||
157 | @item | |
158 | @cite{The direction of rounding when an integer is converted to a | |
159 | floating-point number that cannot exactly represent the original | |
160 | value (6.3.1.4).} | |
161 | ||
162 | @item | |
163 | @cite{The direction of rounding when a floating-point number is | |
164 | converted to a narrower floating-point number (6.3.1.5).} | |
165 | ||
166 | @item | |
167 | @cite{How the nearest representable value or the larger or smaller | |
168 | representable value immediately adjacent to the nearest representable | |
169 | value is chosen for certain floating constants (6.4.4.2).} | |
170 | ||
171 | @item | |
172 | @cite{Whether and how floating expressions are contracted when not | |
173 | disallowed by the @code{FP_CONTRACT} pragma (6.5).} | |
174 | ||
175 | @item | |
176 | @cite{The default state for the @code{FENV_ACCESS} pragma (7.6.1).} | |
177 | ||
178 | @item | |
179 | @cite{Additional floating-point exceptions, rounding modes, environments, | |
180 | and classifications, and their macro names (7.6, 7.12).} | |
181 | ||
182 | @item | |
183 | @cite{The default state for the @code{FP_CONTRACT} pragma (7.12.2).} | |
184 | ||
185 | @item | |
186 | @cite{Whether the ``inexact'' floating-point exception can be raised | |
187 | when the rounded result actually does equal the mathematical result | |
188 | in an IEC 60559 conformant implementation (F.9).} | |
189 | ||
190 | @item | |
191 | @cite{Whether the ``underflow'' (and ``inexact'') floating-point | |
192 | exception can be raised when a result is tiny but not inexact in an | |
193 | IEC 60559 conformant implementation (F.9).} | |
194 | ||
195 | @end itemize | |
196 | ||
197 | @node Arrays and pointers implementation | |
198 | @section Arrays and pointers | |
199 | ||
200 | @itemize @bullet | |
201 | @item | |
202 | @cite{The result of converting a pointer to an integer or | |
203 | vice versa (6.3.2.3).} | |
204 | ||
cbf4c36f | 205 | A cast from pointer to integer discards most-significant bits if the |
58f4de4f RH |
206 | pointer representation is larger than the integer type, |
207 | sign-extends@footnote{Future versions of GCC may zero-extend, or use | |
208 | a target-defined @code{ptr_extend} pattern. Do not rely on sign extension.} | |
cbf4c36f RH |
209 | if the pointer representation is smaller than the integer type, otherwise |
210 | the bits are unchanged. | |
211 | @c ??? We've always claimed that pointers were unsigned entities. | |
212 | @c Shouldn't we therefore be doing zero-extension? If so, the bug | |
213 | @c is in convert_to_integer, where we call type_for_size and request | |
214 | @c a signed integral type. On the other hand, it might be most useful | |
215 | @c for the target if we extend according to POINTERS_EXTEND_UNSIGNED. | |
216 | ||
217 | A cast from integer to pointer discards most-significant bits if the | |
218 | pointer representation is smaller than the integer type, extends according | |
219 | to the signedness of the integer type if the pointer representation | |
220 | is larger than the integer type, otherwise the bits are unchanged. | |
221 | ||
222 | When casting from pointer to integer and back again, the resulting | |
223 | pointer must reference the same object as the original pointer, otherwise | |
224 | the behavior is undefined. That is, one may not use integer arithmetic to | |
225 | avoid the undefined behavior of pointer arithmetic as proscribed in 6.5.6/8. | |
226 | ||
fe203faf RH |
227 | @item |
228 | @cite{The size of the result of subtracting two pointers to elements | |
229 | of the same array (6.5.6).} | |
230 | ||
231 | @end itemize | |
232 | ||
233 | @node Hints implementation | |
234 | @section Hints | |
235 | ||
236 | @itemize @bullet | |
237 | @item | |
238 | @cite{The extent to which suggestions made by using the @code{register} | |
239 | storage-class specifier are effective (6.7.1).} | |
240 | ||
241 | @item | |
242 | @cite{The extent to which suggestions made by using the inline function | |
243 | specifier are effective (6.7.4).} | |
244 | ||
245 | @end itemize | |
246 | ||
247 | @node Structures unions enumerations and bit-fields implementation | |
248 | @section Structures, unions, enumerations, and bit-fields | |
249 | ||
250 | @itemize @bullet | |
251 | @item | |
252 | @cite{Whether a ``plain'' int bit-field is treated as a @code{signed int} | |
253 | bit-field or as an @code{unsigned int} bit-field (6.7.2, 6.7.2.1).} | |
254 | ||
255 | @item | |
256 | @cite{Allowable bit-field types other than @code{_Bool}, @code{signed int}, | |
257 | and @code{unsigned int} (6.7.2.1).} | |
258 | ||
259 | @item | |
260 | @cite{Whether a bit-field can straddle a storage-unit boundary (6.7.2.1).} | |
261 | ||
262 | @item | |
263 | @cite{The order of allocation of bit-fields within a unit (6.7.2.1).} | |
264 | ||
265 | @item | |
266 | @cite{The alignment of non-bit-field members of structures (6.7.2.1).} | |
267 | ||
268 | @item | |
269 | @cite{The integer type compatible with each enumerated type (6.7.2.2).} | |
270 | ||
271 | @end itemize | |
272 | ||
273 | @node Qualifiers implementation | |
274 | @section Qualifiers | |
275 | ||
276 | @itemize @bullet | |
277 | @item | |
278 | @cite{What constitutes an access to an object that has volatile-qualified | |
279 | type (6.7.3).} | |
280 | ||
281 | @end itemize | |
282 | ||
283 | @node Preprocessing directives implementation | |
284 | @section Preprocessing directives | |
285 | ||
286 | @itemize @bullet | |
287 | @item | |
288 | @cite{How sequences in both forms of header names are mapped to headers | |
289 | or external source file names (6.4.7).} | |
290 | ||
291 | @item | |
292 | @cite{Whether the value of a character constant in a constant expression | |
293 | that controls conditional inclusion matches the value of the same character | |
294 | constant in the execution character set (6.10.1).} | |
295 | ||
296 | @item | |
297 | @cite{Whether the value of a single-character character constant in a | |
298 | constant expression that controls conditional inclusion may have a | |
299 | negative value (6.10.1).} | |
300 | ||
301 | @item | |
302 | @cite{The places that are searched for an included @samp{<>} delimited | |
303 | header, and how the places are specified or the header is | |
304 | identified (6.10.2).} | |
305 | ||
306 | @item | |
307 | @cite{How the named source file is searched for in an included @samp{""} | |
308 | delimited header (6.10.2).} | |
309 | ||
310 | @item | |
311 | @cite{The method by which preprocessing tokens (possibly resulting from | |
312 | macro expansion) in a @code{#include} directive are combined into a header | |
313 | name (6.10.2).} | |
314 | ||
315 | @item | |
316 | @cite{The nesting limit for @code{#include} processing (6.10.2).} | |
317 | ||
318 | @item | |
319 | @cite{Whether the @samp{#} operator inserts a @samp{\} character before | |
320 | the @samp{\} character that begins a universal character name in a | |
321 | character constant or string literal (6.10.3.2).} | |
322 | ||
323 | @item | |
324 | @cite{The behavior on each recognized non-@code{STDC #pragma} | |
325 | directive (6.10.6).} | |
326 | ||
327 | @item | |
328 | @cite{The definitions for @code{__DATE__} and @code{__TIME__} when | |
329 | respectively, the date and time of translation are not available (6.10.8).} | |
330 | ||
331 | @end itemize | |
332 | ||
333 | @node Library functions implementation | |
334 | @section Library functions | |
335 | ||
0c688a7d | 336 | The behavior of these points are dependent on the implementation |
fe203faf RH |
337 | of the C library, and are not defined by GCC itself. |
338 | ||
339 | @node Architecture implementation | |
340 | @section Architecture | |
341 | ||
342 | @itemize @bullet | |
343 | @item | |
344 | @cite{The values or expressions assigned to the macros specified in the | |
39ffd3cb | 345 | headers @code{<float.h>}, @code{<limits.h>}, and @code{<stdint.h>} |
fe203faf RH |
346 | (5.2.4.2, 7.18.2, 7.18.3).} |
347 | ||
348 | @item | |
349 | @cite{The number, order, and encoding of bytes in any object | |
350 | (when not explicitly specified in this International Standard) (6.2.6.1).} | |
351 | ||
352 | @item | |
353 | @cite{The value of the result of the sizeof operator (6.5.3.4).} | |
354 | ||
355 | @end itemize | |
356 | ||
357 | @node Locale-specific behavior implementation | |
358 | @section Locale-specific behavior | |
359 | ||
0c688a7d | 360 | The behavior of these points are dependent on the implementation |
fe203faf RH |
361 | of the C library, and are not defined by GCC itself. |
362 | ||
c1f7febf RK |
363 | @node C Extensions |
364 | @chapter Extensions to the C Language Family | |
365 | @cindex extensions, C language | |
366 | @cindex C language extensions | |
367 | ||
84330467 | 368 | @opindex pedantic |
161d7b59 | 369 | GNU C provides several language features not found in ISO standard C@. |
f0523f02 | 370 | (The @option{-pedantic} option directs GCC to print a warning message if |
c1f7febf RK |
371 | any of these features is used.) To test for the availability of these |
372 | features in conditional compilation, check for a predefined macro | |
161d7b59 | 373 | @code{__GNUC__}, which is always defined under GCC@. |
c1f7febf | 374 | |
161d7b59 | 375 | These extensions are available in C and Objective-C@. Most of them are |
c1f7febf RK |
376 | also available in C++. @xref{C++ Extensions,,Extensions to the |
377 | C++ Language}, for extensions that apply @emph{only} to C++. | |
378 | ||
4b404517 JM |
379 | Some features that are in ISO C99 but not C89 or C++ are also, as |
380 | extensions, accepted by GCC in C89 mode and in C++. | |
5490d604 | 381 | |
c1f7febf RK |
382 | @menu |
383 | * Statement Exprs:: Putting statements and declarations inside expressions. | |
384 | * Local Labels:: Labels local to a statement-expression. | |
385 | * Labels as Values:: Getting pointers to labels, and computed gotos. | |
386 | * Nested Functions:: As in Algol and Pascal, lexical scoping of functions. | |
387 | * Constructing Calls:: Dispatching a call to another function. | |
388 | * Naming Types:: Giving a name to the type of some expression. | |
389 | * Typeof:: @code{typeof}: referring to the type of an expression. | |
390 | * Lvalues:: Using @samp{?:}, @samp{,} and casts in lvalues. | |
391 | * Conditionals:: Omitting the middle operand of a @samp{?:} expression. | |
392 | * Long Long:: Double-word integers---@code{long long int}. | |
393 | * Complex:: Data types for complex numbers. | |
6f4d7222 | 394 | * Hex Floats:: Hexadecimal floating-point constants. |
c1f7febf RK |
395 | * Zero Length:: Zero-length arrays. |
396 | * Variable Length:: Arrays whose length is computed at run time. | |
ccd96f0a NB |
397 | * Variadic Macros:: Macros with a variable number of arguments. |
398 | * Escaped Newlines:: Slightly looser rules for escaped newlines. | |
399 | * Multi-line Strings:: String literals with embedded newlines. | |
c1f7febf RK |
400 | * Subscripting:: Any array can be subscripted, even if not an lvalue. |
401 | * Pointer Arith:: Arithmetic on @code{void}-pointers and function pointers. | |
402 | * Initializers:: Non-constant initializers. | |
4b404517 | 403 | * Compound Literals:: Compound literals give structures, unions |
c1f7febf | 404 | or arrays as values. |
4b404517 | 405 | * Designated Inits:: Labeling elements of initializers. |
c1f7febf RK |
406 | * Cast to Union:: Casting to union type from any member of the union. |
407 | * Case Ranges:: `case 1 ... 9' and such. | |
4b404517 | 408 | * Mixed Declarations:: Mixing declarations and code. |
c1f7febf RK |
409 | * Function Attributes:: Declaring that functions have no side effects, |
410 | or that they can never return. | |
2c5e91d2 | 411 | * Attribute Syntax:: Formal syntax for attributes. |
c1f7febf RK |
412 | * Function Prototypes:: Prototype declarations and old-style definitions. |
413 | * C++ Comments:: C++ comments are recognized. | |
414 | * Dollar Signs:: Dollar sign is allowed in identifiers. | |
415 | * Character Escapes:: @samp{\e} stands for the character @key{ESC}. | |
416 | * Variable Attributes:: Specifying attributes of variables. | |
417 | * Type Attributes:: Specifying attributes of types. | |
418 | * Alignment:: Inquiring about the alignment of a type or variable. | |
419 | * Inline:: Defining inline functions (as fast as macros). | |
420 | * Extended Asm:: Assembler instructions with C expressions as operands. | |
421 | (With them you can define ``built-in'' functions.) | |
422 | * Constraints:: Constraints for asm operands | |
423 | * Asm Labels:: Specifying the assembler name to use for a C symbol. | |
424 | * Explicit Reg Vars:: Defining variables residing in specified registers. | |
425 | * Alternate Keywords:: @code{__const__}, @code{__asm__}, etc., for header files. | |
426 | * Incomplete Enums:: @code{enum foo;}, with details to follow. | |
427 | * Function Names:: Printable strings which are the name of the current | |
428 | function. | |
429 | * Return Address:: Getting the return or frame address of a function. | |
1255c85c | 430 | * Vector Extensions:: Using vector instructions through built-in functions. |
c5c76735 | 431 | * Other Builtins:: Other built-in functions. |
0975678f | 432 | * Target Builtins:: Built-in functions specific to particular targets. |
0168a849 | 433 | * Pragmas:: Pragmas accepted by GCC. |
b11cc610 | 434 | * Unnamed Fields:: Unnamed struct/union fields within structs/unions. |
c1f7febf | 435 | @end menu |
c1f7febf RK |
436 | |
437 | @node Statement Exprs | |
438 | @section Statements and Declarations in Expressions | |
439 | @cindex statements inside expressions | |
440 | @cindex declarations inside expressions | |
441 | @cindex expressions containing statements | |
442 | @cindex macros, statements in expressions | |
443 | ||
444 | @c the above section title wrapped and causes an underfull hbox.. i | |
445 | @c changed it from "within" to "in". --mew 4feb93 | |
446 | ||
447 | A compound statement enclosed in parentheses may appear as an expression | |
161d7b59 | 448 | in GNU C@. This allows you to use loops, switches, and local variables |
c1f7febf RK |
449 | within an expression. |
450 | ||
451 | Recall that a compound statement is a sequence of statements surrounded | |
452 | by braces; in this construct, parentheses go around the braces. For | |
453 | example: | |
454 | ||
455 | @example | |
456 | (@{ int y = foo (); int z; | |
457 | if (y > 0) z = y; | |
458 | else z = - y; | |
459 | z; @}) | |
460 | @end example | |
461 | ||
462 | @noindent | |
463 | is a valid (though slightly more complex than necessary) expression | |
464 | for the absolute value of @code{foo ()}. | |
465 | ||
466 | The last thing in the compound statement should be an expression | |
467 | followed by a semicolon; the value of this subexpression serves as the | |
468 | value of the entire construct. (If you use some other kind of statement | |
469 | last within the braces, the construct has type @code{void}, and thus | |
470 | effectively no value.) | |
471 | ||
472 | This feature is especially useful in making macro definitions ``safe'' (so | |
473 | that they evaluate each operand exactly once). For example, the | |
474 | ``maximum'' function is commonly defined as a macro in standard C as | |
475 | follows: | |
476 | ||
477 | @example | |
478 | #define max(a,b) ((a) > (b) ? (a) : (b)) | |
479 | @end example | |
480 | ||
481 | @noindent | |
482 | @cindex side effects, macro argument | |
483 | But this definition computes either @var{a} or @var{b} twice, with bad | |
484 | results if the operand has side effects. In GNU C, if you know the | |
485 | type of the operands (here let's assume @code{int}), you can define | |
486 | the macro safely as follows: | |
487 | ||
488 | @example | |
489 | #define maxint(a,b) \ | |
490 | (@{int _a = (a), _b = (b); _a > _b ? _a : _b; @}) | |
491 | @end example | |
492 | ||
493 | Embedded statements are not allowed in constant expressions, such as | |
c771326b | 494 | the value of an enumeration constant, the width of a bit-field, or |
c1f7febf RK |
495 | the initial value of a static variable. |
496 | ||
497 | If you don't know the type of the operand, you can still do this, but you | |
498 | must use @code{typeof} (@pxref{Typeof}) or type naming (@pxref{Naming | |
499 | Types}). | |
500 | ||
b98e139b MM |
501 | Statement expressions are not supported fully in G++, and their fate |
502 | there is unclear. (It is possible that they will become fully supported | |
503 | at some point, or that they will be deprecated, or that the bugs that | |
504 | are present will continue to exist indefinitely.) Presently, statement | |
02f52e19 | 505 | expressions do not work well as default arguments. |
b98e139b MM |
506 | |
507 | In addition, there are semantic issues with statement-expressions in | |
508 | C++. If you try to use statement-expressions instead of inline | |
509 | functions in C++, you may be surprised at the way object destruction is | |
510 | handled. For example: | |
511 | ||
512 | @example | |
513 | #define foo(a) (@{int b = (a); b + 3; @}) | |
514 | @end example | |
515 | ||
516 | @noindent | |
517 | does not work the same way as: | |
518 | ||
519 | @example | |
54e1d3a6 | 520 | inline int foo(int a) @{ int b = a; return b + 3; @} |
b98e139b MM |
521 | @end example |
522 | ||
523 | @noindent | |
524 | In particular, if the expression passed into @code{foo} involves the | |
525 | creation of temporaries, the destructors for those temporaries will be | |
526 | run earlier in the case of the macro than in the case of the function. | |
527 | ||
528 | These considerations mean that it is probably a bad idea to use | |
529 | statement-expressions of this form in header files that are designed to | |
54e1d3a6 MM |
530 | work with C++. (Note that some versions of the GNU C Library contained |
531 | header files using statement-expression that lead to precisely this | |
532 | bug.) | |
b98e139b | 533 | |
c1f7febf RK |
534 | @node Local Labels |
535 | @section Locally Declared Labels | |
536 | @cindex local labels | |
537 | @cindex macros, local labels | |
538 | ||
539 | Each statement expression is a scope in which @dfn{local labels} can be | |
540 | declared. A local label is simply an identifier; you can jump to it | |
541 | with an ordinary @code{goto} statement, but only from within the | |
542 | statement expression it belongs to. | |
543 | ||
544 | A local label declaration looks like this: | |
545 | ||
546 | @example | |
547 | __label__ @var{label}; | |
548 | @end example | |
549 | ||
550 | @noindent | |
551 | or | |
552 | ||
553 | @example | |
554 | __label__ @var{label1}, @var{label2}, @dots{}; | |
555 | @end example | |
556 | ||
557 | Local label declarations must come at the beginning of the statement | |
558 | expression, right after the @samp{(@{}, before any ordinary | |
559 | declarations. | |
560 | ||
561 | The label declaration defines the label @emph{name}, but does not define | |
562 | the label itself. You must do this in the usual way, with | |
563 | @code{@var{label}:}, within the statements of the statement expression. | |
564 | ||
565 | The local label feature is useful because statement expressions are | |
566 | often used in macros. If the macro contains nested loops, a @code{goto} | |
567 | can be useful for breaking out of them. However, an ordinary label | |
568 | whose scope is the whole function cannot be used: if the macro can be | |
569 | expanded several times in one function, the label will be multiply | |
570 | defined in that function. A local label avoids this problem. For | |
571 | example: | |
572 | ||
573 | @example | |
574 | #define SEARCH(array, target) \ | |
310668e8 | 575 | (@{ \ |
c1f7febf RK |
576 | __label__ found; \ |
577 | typeof (target) _SEARCH_target = (target); \ | |
578 | typeof (*(array)) *_SEARCH_array = (array); \ | |
579 | int i, j; \ | |
580 | int value; \ | |
581 | for (i = 0; i < max; i++) \ | |
582 | for (j = 0; j < max; j++) \ | |
583 | if (_SEARCH_array[i][j] == _SEARCH_target) \ | |
310668e8 | 584 | @{ value = i; goto found; @} \ |
c1f7febf RK |
585 | value = -1; \ |
586 | found: \ | |
587 | value; \ | |
588 | @}) | |
589 | @end example | |
590 | ||
591 | @node Labels as Values | |
592 | @section Labels as Values | |
593 | @cindex labels as values | |
594 | @cindex computed gotos | |
595 | @cindex goto with computed label | |
596 | @cindex address of a label | |
597 | ||
598 | You can get the address of a label defined in the current function | |
599 | (or a containing function) with the unary operator @samp{&&}. The | |
600 | value has type @code{void *}. This value is a constant and can be used | |
601 | wherever a constant of that type is valid. For example: | |
602 | ||
603 | @example | |
604 | void *ptr; | |
605 | @dots{} | |
606 | ptr = &&foo; | |
607 | @end example | |
608 | ||
609 | To use these values, you need to be able to jump to one. This is done | |
610 | with the computed goto statement@footnote{The analogous feature in | |
611 | Fortran is called an assigned goto, but that name seems inappropriate in | |
612 | C, where one can do more than simply store label addresses in label | |
613 | variables.}, @code{goto *@var{exp};}. For example, | |
614 | ||
615 | @example | |
616 | goto *ptr; | |
617 | @end example | |
618 | ||
619 | @noindent | |
620 | Any expression of type @code{void *} is allowed. | |
621 | ||
622 | One way of using these constants is in initializing a static array that | |
623 | will serve as a jump table: | |
624 | ||
625 | @example | |
626 | static void *array[] = @{ &&foo, &&bar, &&hack @}; | |
627 | @end example | |
628 | ||
629 | Then you can select a label with indexing, like this: | |
630 | ||
631 | @example | |
632 | goto *array[i]; | |
633 | @end example | |
634 | ||
635 | @noindent | |
636 | Note that this does not check whether the subscript is in bounds---array | |
637 | indexing in C never does that. | |
638 | ||
639 | Such an array of label values serves a purpose much like that of the | |
640 | @code{switch} statement. The @code{switch} statement is cleaner, so | |
641 | use that rather than an array unless the problem does not fit a | |
642 | @code{switch} statement very well. | |
643 | ||
644 | Another use of label values is in an interpreter for threaded code. | |
645 | The labels within the interpreter function can be stored in the | |
646 | threaded code for super-fast dispatching. | |
647 | ||
02f52e19 | 648 | You may not use this mechanism to jump to code in a different function. |
47620e09 | 649 | If you do that, totally unpredictable things will happen. The best way to |
c1f7febf RK |
650 | avoid this is to store the label address only in automatic variables and |
651 | never pass it as an argument. | |
652 | ||
47620e09 RH |
653 | An alternate way to write the above example is |
654 | ||
655 | @example | |
310668e8 JM |
656 | static const int array[] = @{ &&foo - &&foo, &&bar - &&foo, |
657 | &&hack - &&foo @}; | |
47620e09 RH |
658 | goto *(&&foo + array[i]); |
659 | @end example | |
660 | ||
661 | @noindent | |
662 | This is more friendly to code living in shared libraries, as it reduces | |
663 | the number of dynamic relocations that are needed, and by consequence, | |
664 | allows the data to be read-only. | |
665 | ||
c1f7febf RK |
666 | @node Nested Functions |
667 | @section Nested Functions | |
668 | @cindex nested functions | |
669 | @cindex downward funargs | |
670 | @cindex thunks | |
671 | ||
672 | A @dfn{nested function} is a function defined inside another function. | |
673 | (Nested functions are not supported for GNU C++.) The nested function's | |
674 | name is local to the block where it is defined. For example, here we | |
675 | define a nested function named @code{square}, and call it twice: | |
676 | ||
677 | @example | |
678 | @group | |
679 | foo (double a, double b) | |
680 | @{ | |
681 | double square (double z) @{ return z * z; @} | |
682 | ||
683 | return square (a) + square (b); | |
684 | @} | |
685 | @end group | |
686 | @end example | |
687 | ||
688 | The nested function can access all the variables of the containing | |
689 | function that are visible at the point of its definition. This is | |
690 | called @dfn{lexical scoping}. For example, here we show a nested | |
691 | function which uses an inherited variable named @code{offset}: | |
692 | ||
693 | @example | |
aee96fe9 | 694 | @group |
c1f7febf RK |
695 | bar (int *array, int offset, int size) |
696 | @{ | |
697 | int access (int *array, int index) | |
698 | @{ return array[index + offset]; @} | |
699 | int i; | |
700 | @dots{} | |
701 | for (i = 0; i < size; i++) | |
702 | @dots{} access (array, i) @dots{} | |
703 | @} | |
aee96fe9 | 704 | @end group |
c1f7febf RK |
705 | @end example |
706 | ||
707 | Nested function definitions are permitted within functions in the places | |
708 | where variable definitions are allowed; that is, in any block, before | |
709 | the first statement in the block. | |
710 | ||
711 | It is possible to call the nested function from outside the scope of its | |
712 | name by storing its address or passing the address to another function: | |
713 | ||
714 | @example | |
715 | hack (int *array, int size) | |
716 | @{ | |
717 | void store (int index, int value) | |
718 | @{ array[index] = value; @} | |
719 | ||
720 | intermediate (store, size); | |
721 | @} | |
722 | @end example | |
723 | ||
724 | Here, the function @code{intermediate} receives the address of | |
725 | @code{store} as an argument. If @code{intermediate} calls @code{store}, | |
726 | the arguments given to @code{store} are used to store into @code{array}. | |
727 | But this technique works only so long as the containing function | |
728 | (@code{hack}, in this example) does not exit. | |
729 | ||
730 | If you try to call the nested function through its address after the | |
731 | containing function has exited, all hell will break loose. If you try | |
732 | to call it after a containing scope level has exited, and if it refers | |
733 | to some of the variables that are no longer in scope, you may be lucky, | |
734 | but it's not wise to take the risk. If, however, the nested function | |
735 | does not refer to anything that has gone out of scope, you should be | |
736 | safe. | |
737 | ||
9c34dbbf ZW |
738 | GCC implements taking the address of a nested function using a technique |
739 | called @dfn{trampolines}. A paper describing them is available as | |
740 | ||
741 | @noindent | |
742 | @uref{http://people.debian.org/~karlheg/Usenix88-lexic.pdf}. | |
c1f7febf RK |
743 | |
744 | A nested function can jump to a label inherited from a containing | |
745 | function, provided the label was explicitly declared in the containing | |
746 | function (@pxref{Local Labels}). Such a jump returns instantly to the | |
747 | containing function, exiting the nested function which did the | |
748 | @code{goto} and any intermediate functions as well. Here is an example: | |
749 | ||
750 | @example | |
751 | @group | |
752 | bar (int *array, int offset, int size) | |
753 | @{ | |
754 | __label__ failure; | |
755 | int access (int *array, int index) | |
756 | @{ | |
757 | if (index > size) | |
758 | goto failure; | |
759 | return array[index + offset]; | |
760 | @} | |
761 | int i; | |
762 | @dots{} | |
763 | for (i = 0; i < size; i++) | |
764 | @dots{} access (array, i) @dots{} | |
765 | @dots{} | |
766 | return 0; | |
767 | ||
768 | /* @r{Control comes here from @code{access} | |
769 | if it detects an error.} */ | |
770 | failure: | |
771 | return -1; | |
772 | @} | |
773 | @end group | |
774 | @end example | |
775 | ||
776 | A nested function always has internal linkage. Declaring one with | |
777 | @code{extern} is erroneous. If you need to declare the nested function | |
778 | before its definition, use @code{auto} (which is otherwise meaningless | |
779 | for function declarations). | |
780 | ||
781 | @example | |
782 | bar (int *array, int offset, int size) | |
783 | @{ | |
784 | __label__ failure; | |
785 | auto int access (int *, int); | |
786 | @dots{} | |
787 | int access (int *array, int index) | |
788 | @{ | |
789 | if (index > size) | |
790 | goto failure; | |
791 | return array[index + offset]; | |
792 | @} | |
793 | @dots{} | |
794 | @} | |
795 | @end example | |
796 | ||
797 | @node Constructing Calls | |
798 | @section Constructing Function Calls | |
799 | @cindex constructing calls | |
800 | @cindex forwarding calls | |
801 | ||
802 | Using the built-in functions described below, you can record | |
803 | the arguments a function received, and call another function | |
804 | with the same arguments, without knowing the number or types | |
805 | of the arguments. | |
806 | ||
807 | You can also record the return value of that function call, | |
808 | and later return that value, without knowing what data type | |
809 | the function tried to return (as long as your caller expects | |
810 | that data type). | |
811 | ||
84330467 JM |
812 | @deftypefn {Built-in Function} {void *} __builtin_apply_args () |
813 | This built-in function returns a pointer to data | |
c1f7febf RK |
814 | describing how to perform a call with the same arguments as were passed |
815 | to the current function. | |
816 | ||
817 | The function saves the arg pointer register, structure value address, | |
818 | and all registers that might be used to pass arguments to a function | |
819 | into a block of memory allocated on the stack. Then it returns the | |
820 | address of that block. | |
84330467 | 821 | @end deftypefn |
c1f7febf | 822 | |
84330467 JM |
823 | @deftypefn {Built-in Function} {void *} __builtin_apply (void (*@var{function})(), void *@var{arguments}, size_t @var{size}) |
824 | This built-in function invokes @var{function} | |
825 | with a copy of the parameters described by @var{arguments} | |
826 | and @var{size}. | |
c1f7febf RK |
827 | |
828 | The value of @var{arguments} should be the value returned by | |
829 | @code{__builtin_apply_args}. The argument @var{size} specifies the size | |
830 | of the stack argument data, in bytes. | |
831 | ||
84330467 | 832 | This function returns a pointer to data describing |
c1f7febf RK |
833 | how to return whatever value was returned by @var{function}. The data |
834 | is saved in a block of memory allocated on the stack. | |
835 | ||
836 | It is not always simple to compute the proper value for @var{size}. The | |
837 | value is used by @code{__builtin_apply} to compute the amount of data | |
838 | that should be pushed on the stack and copied from the incoming argument | |
839 | area. | |
84330467 | 840 | @end deftypefn |
c1f7febf | 841 | |
84330467 | 842 | @deftypefn {Built-in Function} {void} __builtin_return (void *@var{result}) |
c1f7febf RK |
843 | This built-in function returns the value described by @var{result} from |
844 | the containing function. You should specify, for @var{result}, a value | |
845 | returned by @code{__builtin_apply}. | |
84330467 | 846 | @end deftypefn |
c1f7febf RK |
847 | |
848 | @node Naming Types | |
849 | @section Naming an Expression's Type | |
850 | @cindex naming types | |
851 | ||
852 | You can give a name to the type of an expression using a @code{typedef} | |
853 | declaration with an initializer. Here is how to define @var{name} as a | |
854 | type name for the type of @var{exp}: | |
855 | ||
856 | @example | |
857 | typedef @var{name} = @var{exp}; | |
858 | @end example | |
859 | ||
860 | This is useful in conjunction with the statements-within-expressions | |
861 | feature. Here is how the two together can be used to define a safe | |
862 | ``maximum'' macro that operates on any arithmetic type: | |
863 | ||
864 | @example | |
865 | #define max(a,b) \ | |
866 | (@{typedef _ta = (a), _tb = (b); \ | |
867 | _ta _a = (a); _tb _b = (b); \ | |
868 | _a > _b ? _a : _b; @}) | |
869 | @end example | |
870 | ||
871 | @cindex underscores in variables in macros | |
872 | @cindex @samp{_} in variables in macros | |
873 | @cindex local variables in macros | |
874 | @cindex variables, local, in macros | |
875 | @cindex macros, local variables in | |
876 | ||
877 | The reason for using names that start with underscores for the local | |
878 | variables is to avoid conflicts with variable names that occur within the | |
879 | expressions that are substituted for @code{a} and @code{b}. Eventually we | |
880 | hope to design a new form of declaration syntax that allows you to declare | |
881 | variables whose scopes start only after their initializers; this will be a | |
882 | more reliable way to prevent such conflicts. | |
883 | ||
884 | @node Typeof | |
885 | @section Referring to a Type with @code{typeof} | |
886 | @findex typeof | |
887 | @findex sizeof | |
888 | @cindex macros, types of arguments | |
889 | ||
890 | Another way to refer to the type of an expression is with @code{typeof}. | |
891 | The syntax of using of this keyword looks like @code{sizeof}, but the | |
892 | construct acts semantically like a type name defined with @code{typedef}. | |
893 | ||
894 | There are two ways of writing the argument to @code{typeof}: with an | |
895 | expression or with a type. Here is an example with an expression: | |
896 | ||
897 | @example | |
898 | typeof (x[0](1)) | |
899 | @end example | |
900 | ||
901 | @noindent | |
89aed483 JM |
902 | This assumes that @code{x} is an array of pointers to functions; |
903 | the type described is that of the values of the functions. | |
c1f7febf RK |
904 | |
905 | Here is an example with a typename as the argument: | |
906 | ||
907 | @example | |
908 | typeof (int *) | |
909 | @end example | |
910 | ||
911 | @noindent | |
912 | Here the type described is that of pointers to @code{int}. | |
913 | ||
5490d604 | 914 | If you are writing a header file that must work when included in ISO C |
c1f7febf RK |
915 | programs, write @code{__typeof__} instead of @code{typeof}. |
916 | @xref{Alternate Keywords}. | |
917 | ||
918 | A @code{typeof}-construct can be used anywhere a typedef name could be | |
919 | used. For example, you can use it in a declaration, in a cast, or inside | |
920 | of @code{sizeof} or @code{typeof}. | |
921 | ||
922 | @itemize @bullet | |
923 | @item | |
924 | This declares @code{y} with the type of what @code{x} points to. | |
925 | ||
926 | @example | |
927 | typeof (*x) y; | |
928 | @end example | |
929 | ||
930 | @item | |
931 | This declares @code{y} as an array of such values. | |
932 | ||
933 | @example | |
934 | typeof (*x) y[4]; | |
935 | @end example | |
936 | ||
937 | @item | |
938 | This declares @code{y} as an array of pointers to characters: | |
939 | ||
940 | @example | |
941 | typeof (typeof (char *)[4]) y; | |
942 | @end example | |
943 | ||
944 | @noindent | |
945 | It is equivalent to the following traditional C declaration: | |
946 | ||
947 | @example | |
948 | char *y[4]; | |
949 | @end example | |
950 | ||
951 | To see the meaning of the declaration using @code{typeof}, and why it | |
952 | might be a useful way to write, let's rewrite it with these macros: | |
953 | ||
954 | @example | |
955 | #define pointer(T) typeof(T *) | |
956 | #define array(T, N) typeof(T [N]) | |
957 | @end example | |
958 | ||
959 | @noindent | |
960 | Now the declaration can be rewritten this way: | |
961 | ||
962 | @example | |
963 | array (pointer (char), 4) y; | |
964 | @end example | |
965 | ||
966 | @noindent | |
967 | Thus, @code{array (pointer (char), 4)} is the type of arrays of 4 | |
968 | pointers to @code{char}. | |
969 | @end itemize | |
970 | ||
971 | @node Lvalues | |
972 | @section Generalized Lvalues | |
973 | @cindex compound expressions as lvalues | |
974 | @cindex expressions, compound, as lvalues | |
975 | @cindex conditional expressions as lvalues | |
976 | @cindex expressions, conditional, as lvalues | |
977 | @cindex casts as lvalues | |
978 | @cindex generalized lvalues | |
979 | @cindex lvalues, generalized | |
980 | @cindex extensions, @code{?:} | |
981 | @cindex @code{?:} extensions | |
982 | Compound expressions, conditional expressions and casts are allowed as | |
983 | lvalues provided their operands are lvalues. This means that you can take | |
984 | their addresses or store values into them. | |
985 | ||
986 | Standard C++ allows compound expressions and conditional expressions as | |
987 | lvalues, and permits casts to reference type, so use of this extension | |
988 | is deprecated for C++ code. | |
989 | ||
990 | For example, a compound expression can be assigned, provided the last | |
991 | expression in the sequence is an lvalue. These two expressions are | |
992 | equivalent: | |
993 | ||
994 | @example | |
995 | (a, b) += 5 | |
996 | a, (b += 5) | |
997 | @end example | |
998 | ||
999 | Similarly, the address of the compound expression can be taken. These two | |
1000 | expressions are equivalent: | |
1001 | ||
1002 | @example | |
1003 | &(a, b) | |
1004 | a, &b | |
1005 | @end example | |
1006 | ||
1007 | A conditional expression is a valid lvalue if its type is not void and the | |
1008 | true and false branches are both valid lvalues. For example, these two | |
1009 | expressions are equivalent: | |
1010 | ||
1011 | @example | |
1012 | (a ? b : c) = 5 | |
1013 | (a ? b = 5 : (c = 5)) | |
1014 | @end example | |
1015 | ||
1016 | A cast is a valid lvalue if its operand is an lvalue. A simple | |
1017 | assignment whose left-hand side is a cast works by converting the | |
1018 | right-hand side first to the specified type, then to the type of the | |
1019 | inner left-hand side expression. After this is stored, the value is | |
1020 | converted back to the specified type to become the value of the | |
1021 | assignment. Thus, if @code{a} has type @code{char *}, the following two | |
1022 | expressions are equivalent: | |
1023 | ||
1024 | @example | |
1025 | (int)a = 5 | |
1026 | (int)(a = (char *)(int)5) | |
1027 | @end example | |
1028 | ||
1029 | An assignment-with-arithmetic operation such as @samp{+=} applied to a cast | |
1030 | performs the arithmetic using the type resulting from the cast, and then | |
1031 | continues as in the previous case. Therefore, these two expressions are | |
1032 | equivalent: | |
1033 | ||
1034 | @example | |
1035 | (int)a += 5 | |
1036 | (int)(a = (char *)(int) ((int)a + 5)) | |
1037 | @end example | |
1038 | ||
1039 | You cannot take the address of an lvalue cast, because the use of its | |
1040 | address would not work out coherently. Suppose that @code{&(int)f} were | |
1041 | permitted, where @code{f} has type @code{float}. Then the following | |
1042 | statement would try to store an integer bit-pattern where a floating | |
1043 | point number belongs: | |
1044 | ||
1045 | @example | |
1046 | *&(int)f = 1; | |
1047 | @end example | |
1048 | ||
1049 | This is quite different from what @code{(int)f = 1} would do---that | |
1050 | would convert 1 to floating point and store it. Rather than cause this | |
1051 | inconsistency, we think it is better to prohibit use of @samp{&} on a cast. | |
1052 | ||
1053 | If you really do want an @code{int *} pointer with the address of | |
1054 | @code{f}, you can simply write @code{(int *)&f}. | |
1055 | ||
1056 | @node Conditionals | |
1057 | @section Conditionals with Omitted Operands | |
1058 | @cindex conditional expressions, extensions | |
1059 | @cindex omitted middle-operands | |
1060 | @cindex middle-operands, omitted | |
1061 | @cindex extensions, @code{?:} | |
1062 | @cindex @code{?:} extensions | |
1063 | ||
1064 | The middle operand in a conditional expression may be omitted. Then | |
1065 | if the first operand is nonzero, its value is the value of the conditional | |
1066 | expression. | |
1067 | ||
1068 | Therefore, the expression | |
1069 | ||
1070 | @example | |
1071 | x ? : y | |
1072 | @end example | |
1073 | ||
1074 | @noindent | |
1075 | has the value of @code{x} if that is nonzero; otherwise, the value of | |
1076 | @code{y}. | |
1077 | ||
1078 | This example is perfectly equivalent to | |
1079 | ||
1080 | @example | |
1081 | x ? x : y | |
1082 | @end example | |
1083 | ||
1084 | @cindex side effect in ?: | |
1085 | @cindex ?: side effect | |
1086 | @noindent | |
1087 | In this simple case, the ability to omit the middle operand is not | |
1088 | especially useful. When it becomes useful is when the first operand does, | |
1089 | or may (if it is a macro argument), contain a side effect. Then repeating | |
1090 | the operand in the middle would perform the side effect twice. Omitting | |
1091 | the middle operand uses the value already computed without the undesirable | |
1092 | effects of recomputing it. | |
1093 | ||
1094 | @node Long Long | |
1095 | @section Double-Word Integers | |
1096 | @cindex @code{long long} data types | |
1097 | @cindex double-word arithmetic | |
1098 | @cindex multiprecision arithmetic | |
4b404517 JM |
1099 | @cindex @code{LL} integer suffix |
1100 | @cindex @code{ULL} integer suffix | |
c1f7febf | 1101 | |
4b404517 JM |
1102 | ISO C99 supports data types for integers that are at least 64 bits wide, |
1103 | and as an extension GCC supports them in C89 mode and in C++. | |
1104 | Simply write @code{long long int} for a signed integer, or | |
c1f7febf | 1105 | @code{unsigned long long int} for an unsigned integer. To make an |
84330467 | 1106 | integer constant of type @code{long long int}, add the suffix @samp{LL} |
c1f7febf | 1107 | to the integer. To make an integer constant of type @code{unsigned long |
84330467 | 1108 | long int}, add the suffix @samp{ULL} to the integer. |
c1f7febf RK |
1109 | |
1110 | You can use these types in arithmetic like any other integer types. | |
1111 | Addition, subtraction, and bitwise boolean operations on these types | |
1112 | are open-coded on all types of machines. Multiplication is open-coded | |
1113 | if the machine supports fullword-to-doubleword a widening multiply | |
1114 | instruction. Division and shifts are open-coded only on machines that | |
1115 | provide special support. The operations that are not open-coded use | |
161d7b59 | 1116 | special library routines that come with GCC@. |
c1f7febf RK |
1117 | |
1118 | There may be pitfalls when you use @code{long long} types for function | |
1119 | arguments, unless you declare function prototypes. If a function | |
1120 | expects type @code{int} for its argument, and you pass a value of type | |
1121 | @code{long long int}, confusion will result because the caller and the | |
1122 | subroutine will disagree about the number of bytes for the argument. | |
1123 | Likewise, if the function expects @code{long long int} and you pass | |
1124 | @code{int}. The best way to avoid such problems is to use prototypes. | |
1125 | ||
1126 | @node Complex | |
1127 | @section Complex Numbers | |
1128 | @cindex complex numbers | |
4b404517 JM |
1129 | @cindex @code{_Complex} keyword |
1130 | @cindex @code{__complex__} keyword | |
c1f7febf | 1131 | |
4b404517 JM |
1132 | ISO C99 supports complex floating data types, and as an extension GCC |
1133 | supports them in C89 mode and in C++, and supports complex integer data | |
1134 | types which are not part of ISO C99. You can declare complex types | |
1135 | using the keyword @code{_Complex}. As an extension, the older GNU | |
1136 | keyword @code{__complex__} is also supported. | |
c1f7febf | 1137 | |
4b404517 | 1138 | For example, @samp{_Complex double x;} declares @code{x} as a |
c1f7febf | 1139 | variable whose real part and imaginary part are both of type |
4b404517 | 1140 | @code{double}. @samp{_Complex short int y;} declares @code{y} to |
c1f7febf RK |
1141 | have real and imaginary parts of type @code{short int}; this is not |
1142 | likely to be useful, but it shows that the set of complex types is | |
1143 | complete. | |
1144 | ||
1145 | To write a constant with a complex data type, use the suffix @samp{i} or | |
1146 | @samp{j} (either one; they are equivalent). For example, @code{2.5fi} | |
4b404517 JM |
1147 | has type @code{_Complex float} and @code{3i} has type |
1148 | @code{_Complex int}. Such a constant always has a pure imaginary | |
c1f7febf | 1149 | value, but you can form any complex value you like by adding one to a |
4b404517 JM |
1150 | real constant. This is a GNU extension; if you have an ISO C99 |
1151 | conforming C library (such as GNU libc), and want to construct complex | |
1152 | constants of floating type, you should include @code{<complex.h>} and | |
1153 | use the macros @code{I} or @code{_Complex_I} instead. | |
c1f7febf | 1154 | |
4b404517 JM |
1155 | @cindex @code{__real__} keyword |
1156 | @cindex @code{__imag__} keyword | |
c1f7febf RK |
1157 | To extract the real part of a complex-valued expression @var{exp}, write |
1158 | @code{__real__ @var{exp}}. Likewise, use @code{__imag__} to | |
4b404517 JM |
1159 | extract the imaginary part. This is a GNU extension; for values of |
1160 | floating type, you should use the ISO C99 functions @code{crealf}, | |
1161 | @code{creal}, @code{creall}, @code{cimagf}, @code{cimag} and | |
1162 | @code{cimagl}, declared in @code{<complex.h>} and also provided as | |
161d7b59 | 1163 | built-in functions by GCC@. |
c1f7febf | 1164 | |
4b404517 | 1165 | @cindex complex conjugation |
c1f7febf | 1166 | The operator @samp{~} performs complex conjugation when used on a value |
4b404517 JM |
1167 | with a complex type. This is a GNU extension; for values of |
1168 | floating type, you should use the ISO C99 functions @code{conjf}, | |
1169 | @code{conj} and @code{conjl}, declared in @code{<complex.h>} and also | |
161d7b59 | 1170 | provided as built-in functions by GCC@. |
c1f7febf | 1171 | |
f0523f02 | 1172 | GCC can allocate complex automatic variables in a noncontiguous |
c1f7febf RK |
1173 | fashion; it's even possible for the real part to be in a register while |
1174 | the imaginary part is on the stack (or vice-versa). None of the | |
1175 | supported debugging info formats has a way to represent noncontiguous | |
f0523f02 | 1176 | allocation like this, so GCC describes a noncontiguous complex |
c1f7febf RK |
1177 | variable as if it were two separate variables of noncomplex type. |
1178 | If the variable's actual name is @code{foo}, the two fictitious | |
1179 | variables are named @code{foo$real} and @code{foo$imag}. You can | |
1180 | examine and set these two fictitious variables with your debugger. | |
1181 | ||
1182 | A future version of GDB will know how to recognize such pairs and treat | |
1183 | them as a single variable with a complex type. | |
1184 | ||
6f4d7222 | 1185 | @node Hex Floats |
6b42b9ea UD |
1186 | @section Hex Floats |
1187 | @cindex hex floats | |
c5c76735 | 1188 | |
4b404517 | 1189 | ISO C99 supports floating-point numbers written not only in the usual |
6f4d7222 | 1190 | decimal notation, such as @code{1.55e1}, but also numbers such as |
4b404517 JM |
1191 | @code{0x1.fp3} written in hexadecimal format. As a GNU extension, GCC |
1192 | supports this in C89 mode (except in some cases when strictly | |
1193 | conforming) and in C++. In that format the | |
84330467 | 1194 | @samp{0x} hex introducer and the @samp{p} or @samp{P} exponent field are |
6f4d7222 | 1195 | mandatory. The exponent is a decimal number that indicates the power of |
84330467 | 1196 | 2 by which the significant part will be multiplied. Thus @samp{0x1.f} is |
aee96fe9 JM |
1197 | @tex |
1198 | $1 {15\over16}$, | |
1199 | @end tex | |
1200 | @ifnottex | |
1201 | 1 15/16, | |
1202 | @end ifnottex | |
1203 | @samp{p3} multiplies it by 8, and the value of @code{0x1.fp3} | |
6f4d7222 UD |
1204 | is the same as @code{1.55e1}. |
1205 | ||
1206 | Unlike for floating-point numbers in the decimal notation the exponent | |
1207 | is always required in the hexadecimal notation. Otherwise the compiler | |
1208 | would not be able to resolve the ambiguity of, e.g., @code{0x1.f}. This | |
84330467 | 1209 | could mean @code{1.0f} or @code{1.9375} since @samp{f} is also the |
6f4d7222 UD |
1210 | extension for floating-point constants of type @code{float}. |
1211 | ||
c1f7febf RK |
1212 | @node Zero Length |
1213 | @section Arrays of Length Zero | |
1214 | @cindex arrays of length zero | |
1215 | @cindex zero-length arrays | |
1216 | @cindex length-zero arrays | |
ffc5c6a9 | 1217 | @cindex flexible array members |
c1f7febf | 1218 | |
161d7b59 | 1219 | Zero-length arrays are allowed in GNU C@. They are very useful as the |
584ef5fe | 1220 | last element of a structure which is really a header for a variable-length |
c1f7febf RK |
1221 | object: |
1222 | ||
1223 | @example | |
1224 | struct line @{ | |
1225 | int length; | |
1226 | char contents[0]; | |
1227 | @}; | |
1228 | ||
584ef5fe RH |
1229 | struct line *thisline = (struct line *) |
1230 | malloc (sizeof (struct line) + this_length); | |
1231 | thisline->length = this_length; | |
c1f7febf RK |
1232 | @end example |
1233 | ||
a25f1211 | 1234 | In ISO C89, you would have to give @code{contents} a length of 1, which |
c1f7febf RK |
1235 | means either you waste space or complicate the argument to @code{malloc}. |
1236 | ||
02f52e19 | 1237 | In ISO C99, you would use a @dfn{flexible array member}, which is |
584ef5fe RH |
1238 | slightly different in syntax and semantics: |
1239 | ||
1240 | @itemize @bullet | |
1241 | @item | |
1242 | Flexible array members are written as @code{contents[]} without | |
1243 | the @code{0}. | |
1244 | ||
1245 | @item | |
1246 | Flexible array members have incomplete type, and so the @code{sizeof} | |
1247 | operator may not be applied. As a quirk of the original implementation | |
1248 | of zero-length arrays, @code{sizeof} evaluates to zero. | |
1249 | ||
1250 | @item | |
1251 | Flexible array members may only appear as the last member of a | |
e7b6a0ee | 1252 | @code{struct} that is otherwise non-empty. |
ffc5c6a9 | 1253 | @end itemize |
a25f1211 | 1254 | |
ffc5c6a9 | 1255 | GCC versions before 3.0 allowed zero-length arrays to be statically |
e7b6a0ee DD |
1256 | initialized, as if they were flexible arrays. In addition to those |
1257 | cases that were useful, it also allowed initializations in situations | |
1258 | that would corrupt later data. Non-empty initialization of zero-length | |
1259 | arrays is now treated like any case where there are more initializer | |
1260 | elements than the array holds, in that a suitable warning about "excess | |
1261 | elements in array" is given, and the excess elements (all of them, in | |
1262 | this case) are ignored. | |
ffc5c6a9 RH |
1263 | |
1264 | Instead GCC allows static initialization of flexible array members. | |
1265 | This is equivalent to defining a new structure containing the original | |
1266 | structure followed by an array of sufficient size to contain the data. | |
e979f9e8 | 1267 | I.e.@: in the following, @code{f1} is constructed as if it were declared |
ffc5c6a9 | 1268 | like @code{f2}. |
a25f1211 RH |
1269 | |
1270 | @example | |
ffc5c6a9 RH |
1271 | struct f1 @{ |
1272 | int x; int y[]; | |
1273 | @} f1 = @{ 1, @{ 2, 3, 4 @} @}; | |
1274 | ||
1275 | struct f2 @{ | |
1276 | struct f1 f1; int data[3]; | |
1277 | @} f2 = @{ @{ 1 @}, @{ 2, 3, 4 @} @}; | |
1278 | @end example | |
584ef5fe | 1279 | |
ffc5c6a9 RH |
1280 | @noindent |
1281 | The convenience of this extension is that @code{f1} has the desired | |
1282 | type, eliminating the need to consistently refer to @code{f2.f1}. | |
1283 | ||
1284 | This has symmetry with normal static arrays, in that an array of | |
1285 | unknown size is also written with @code{[]}. | |
a25f1211 | 1286 | |
ffc5c6a9 RH |
1287 | Of course, this extension only makes sense if the extra data comes at |
1288 | the end of a top-level object, as otherwise we would be overwriting | |
1289 | data at subsequent offsets. To avoid undue complication and confusion | |
1290 | with initialization of deeply nested arrays, we simply disallow any | |
1291 | non-empty initialization except when the structure is the top-level | |
1292 | object. For example: | |
584ef5fe | 1293 | |
ffc5c6a9 RH |
1294 | @example |
1295 | struct foo @{ int x; int y[]; @}; | |
1296 | struct bar @{ struct foo z; @}; | |
1297 | ||
13ba36b4 JM |
1298 | struct foo a = @{ 1, @{ 2, 3, 4 @} @}; // @r{Valid.} |
1299 | struct bar b = @{ @{ 1, @{ 2, 3, 4 @} @} @}; // @r{Invalid.} | |
1300 | struct bar c = @{ @{ 1, @{ @} @} @}; // @r{Valid.} | |
1301 | struct foo d[1] = @{ @{ 1 @{ 2, 3, 4 @} @} @}; // @r{Invalid.} | |
a25f1211 | 1302 | @end example |
4b606faf | 1303 | |
c1f7febf RK |
1304 | @node Variable Length |
1305 | @section Arrays of Variable Length | |
1306 | @cindex variable-length arrays | |
1307 | @cindex arrays of variable length | |
4b404517 | 1308 | @cindex VLAs |
c1f7febf | 1309 | |
4b404517 JM |
1310 | Variable-length automatic arrays are allowed in ISO C99, and as an |
1311 | extension GCC accepts them in C89 mode and in C++. (However, GCC's | |
1312 | implementation of variable-length arrays does not yet conform in detail | |
1313 | to the ISO C99 standard.) These arrays are | |
c1f7febf RK |
1314 | declared like any other automatic arrays, but with a length that is not |
1315 | a constant expression. The storage is allocated at the point of | |
1316 | declaration and deallocated when the brace-level is exited. For | |
1317 | example: | |
1318 | ||
1319 | @example | |
1320 | FILE * | |
1321 | concat_fopen (char *s1, char *s2, char *mode) | |
1322 | @{ | |
1323 | char str[strlen (s1) + strlen (s2) + 1]; | |
1324 | strcpy (str, s1); | |
1325 | strcat (str, s2); | |
1326 | return fopen (str, mode); | |
1327 | @} | |
1328 | @end example | |
1329 | ||
1330 | @cindex scope of a variable length array | |
1331 | @cindex variable-length array scope | |
1332 | @cindex deallocating variable length arrays | |
1333 | Jumping or breaking out of the scope of the array name deallocates the | |
1334 | storage. Jumping into the scope is not allowed; you get an error | |
1335 | message for it. | |
1336 | ||
1337 | @cindex @code{alloca} vs variable-length arrays | |
1338 | You can use the function @code{alloca} to get an effect much like | |
1339 | variable-length arrays. The function @code{alloca} is available in | |
1340 | many other C implementations (but not in all). On the other hand, | |
1341 | variable-length arrays are more elegant. | |
1342 | ||
1343 | There are other differences between these two methods. Space allocated | |
1344 | with @code{alloca} exists until the containing @emph{function} returns. | |
1345 | The space for a variable-length array is deallocated as soon as the array | |
1346 | name's scope ends. (If you use both variable-length arrays and | |
1347 | @code{alloca} in the same function, deallocation of a variable-length array | |
1348 | will also deallocate anything more recently allocated with @code{alloca}.) | |
1349 | ||
1350 | You can also use variable-length arrays as arguments to functions: | |
1351 | ||
1352 | @example | |
1353 | struct entry | |
1354 | tester (int len, char data[len][len]) | |
1355 | @{ | |
1356 | @dots{} | |
1357 | @} | |
1358 | @end example | |
1359 | ||
1360 | The length of an array is computed once when the storage is allocated | |
1361 | and is remembered for the scope of the array in case you access it with | |
1362 | @code{sizeof}. | |
1363 | ||
1364 | If you want to pass the array first and the length afterward, you can | |
1365 | use a forward declaration in the parameter list---another GNU extension. | |
1366 | ||
1367 | @example | |
1368 | struct entry | |
1369 | tester (int len; char data[len][len], int len) | |
1370 | @{ | |
1371 | @dots{} | |
1372 | @} | |
1373 | @end example | |
1374 | ||
1375 | @cindex parameter forward declaration | |
1376 | The @samp{int len} before the semicolon is a @dfn{parameter forward | |
1377 | declaration}, and it serves the purpose of making the name @code{len} | |
1378 | known when the declaration of @code{data} is parsed. | |
1379 | ||
1380 | You can write any number of such parameter forward declarations in the | |
1381 | parameter list. They can be separated by commas or semicolons, but the | |
1382 | last one must end with a semicolon, which is followed by the ``real'' | |
1383 | parameter declarations. Each forward declaration must match a ``real'' | |
4b404517 JM |
1384 | declaration in parameter name and data type. ISO C99 does not support |
1385 | parameter forward declarations. | |
c1f7febf | 1386 | |
ccd96f0a NB |
1387 | @node Variadic Macros |
1388 | @section Macros with a Variable Number of Arguments. | |
c1f7febf RK |
1389 | @cindex variable number of arguments |
1390 | @cindex macro with variable arguments | |
1391 | @cindex rest argument (in macro) | |
ccd96f0a | 1392 | @cindex variadic macros |
c1f7febf | 1393 | |
ccd96f0a NB |
1394 | In the ISO C standard of 1999, a macro can be declared to accept a |
1395 | variable number of arguments much as a function can. The syntax for | |
1396 | defining the macro is similar to that of a function. Here is an | |
1397 | example: | |
c1f7febf RK |
1398 | |
1399 | @example | |
ccd96f0a | 1400 | #define debug(format, ...) fprintf (stderr, format, __VA_ARGS__) |
c1f7febf RK |
1401 | @end example |
1402 | ||
ccd96f0a NB |
1403 | Here @samp{@dots{}} is a @dfn{variable argument}. In the invocation of |
1404 | such a macro, it represents the zero or more tokens until the closing | |
1405 | parenthesis that ends the invocation, including any commas. This set of | |
1406 | tokens replaces the identifier @code{__VA_ARGS__} in the macro body | |
1407 | wherever it appears. See the CPP manual for more information. | |
1408 | ||
1409 | GCC has long supported variadic macros, and used a different syntax that | |
1410 | allowed you to give a name to the variable arguments just like any other | |
1411 | argument. Here is an example: | |
c1f7febf RK |
1412 | |
1413 | @example | |
ccd96f0a | 1414 | #define debug(format, args...) fprintf (stderr, format, args) |
c1f7febf RK |
1415 | @end example |
1416 | ||
ccd96f0a NB |
1417 | This is in all ways equivalent to the ISO C example above, but arguably |
1418 | more readable and descriptive. | |
c1f7febf | 1419 | |
ccd96f0a NB |
1420 | GNU CPP has two further variadic macro extensions, and permits them to |
1421 | be used with either of the above forms of macro definition. | |
1422 | ||
1423 | In standard C, you are not allowed to leave the variable argument out | |
1424 | entirely; but you are allowed to pass an empty argument. For example, | |
1425 | this invocation is invalid in ISO C, because there is no comma after | |
1426 | the string: | |
c1f7febf RK |
1427 | |
1428 | @example | |
ccd96f0a | 1429 | debug ("A message") |
c1f7febf RK |
1430 | @end example |
1431 | ||
ccd96f0a NB |
1432 | GNU CPP permits you to completely omit the variable arguments in this |
1433 | way. In the above examples, the compiler would complain, though since | |
1434 | the expansion of the macro still has the extra comma after the format | |
1435 | string. | |
1436 | ||
1437 | To help solve this problem, CPP behaves specially for variable arguments | |
1438 | used with the token paste operator, @samp{##}. If instead you write | |
c1f7febf RK |
1439 | |
1440 | @example | |
ccd96f0a | 1441 | #define debug(format, ...) fprintf (stderr, format, ## __VA_ARGS__) |
c1f7febf RK |
1442 | @end example |
1443 | ||
ccd96f0a NB |
1444 | and if the variable arguments are omitted or empty, the @samp{##} |
1445 | operator causes the preprocessor to remove the comma before it. If you | |
1446 | do provide some variable arguments in your macro invocation, GNU CPP | |
1447 | does not complain about the paste operation and instead places the | |
1448 | variable arguments after the comma. Just like any other pasted macro | |
1449 | argument, these arguments are not macro expanded. | |
1450 | ||
1451 | @node Escaped Newlines | |
1452 | @section Slightly Looser Rules for Escaped Newlines | |
1453 | @cindex escaped newlines | |
1454 | @cindex newlines (escaped) | |
1455 | ||
f458d1d5 ZW |
1456 | Recently, the preprocessor has relaxed its treatment of escaped |
1457 | newlines. Previously, the newline had to immediately follow a | |
ccd96f0a NB |
1458 | backslash. The current implementation allows whitespace in the form of |
1459 | spaces, horizontal and vertical tabs, and form feeds between the | |
1460 | backslash and the subsequent newline. The preprocessor issues a | |
1461 | warning, but treats it as a valid escaped newline and combines the two | |
1462 | lines to form a single logical line. This works within comments and | |
1463 | tokens, including multi-line strings, as well as between tokens. | |
1464 | Comments are @emph{not} treated as whitespace for the purposes of this | |
1465 | relaxation, since they have not yet been replaced with spaces. | |
1466 | ||
1467 | @node Multi-line Strings | |
1468 | @section String Literals with Embedded Newlines | |
1469 | @cindex multi-line string literals | |
1470 | ||
1471 | As an extension, GNU CPP permits string literals to cross multiple lines | |
1472 | without escaping the embedded newlines. Each embedded newline is | |
1473 | replaced with a single @samp{\n} character in the resulting string | |
1474 | literal, regardless of what form the newline took originally. | |
1475 | ||
1476 | CPP currently allows such strings in directives as well (other than the | |
1477 | @samp{#include} family). This is deprecated and will eventually be | |
1478 | removed. | |
c1f7febf RK |
1479 | |
1480 | @node Subscripting | |
1481 | @section Non-Lvalue Arrays May Have Subscripts | |
1482 | @cindex subscripting | |
1483 | @cindex arrays, non-lvalue | |
1484 | ||
1485 | @cindex subscripting and function values | |
207bf485 JM |
1486 | In ISO C99, arrays that are not lvalues still decay to pointers, and |
1487 | may be subscripted, although they may not be modified or used after | |
1488 | the next sequence point and the unary @samp{&} operator may not be | |
1489 | applied to them. As an extension, GCC allows such arrays to be | |
1490 | subscripted in C89 mode, though otherwise they do not decay to | |
1491 | pointers outside C99 mode. For example, | |
4b404517 | 1492 | this is valid in GNU C though not valid in C89: |
c1f7febf RK |
1493 | |
1494 | @example | |
1495 | @group | |
1496 | struct foo @{int a[4];@}; | |
1497 | ||
1498 | struct foo f(); | |
1499 | ||
1500 | bar (int index) | |
1501 | @{ | |
1502 | return f().a[index]; | |
1503 | @} | |
1504 | @end group | |
1505 | @end example | |
1506 | ||
1507 | @node Pointer Arith | |
1508 | @section Arithmetic on @code{void}- and Function-Pointers | |
1509 | @cindex void pointers, arithmetic | |
1510 | @cindex void, size of pointer to | |
1511 | @cindex function pointers, arithmetic | |
1512 | @cindex function, size of pointer to | |
1513 | ||
1514 | In GNU C, addition and subtraction operations are supported on pointers to | |
1515 | @code{void} and on pointers to functions. This is done by treating the | |
1516 | size of a @code{void} or of a function as 1. | |
1517 | ||
1518 | A consequence of this is that @code{sizeof} is also allowed on @code{void} | |
1519 | and on function types, and returns 1. | |
1520 | ||
84330467 JM |
1521 | @opindex Wpointer-arith |
1522 | The option @option{-Wpointer-arith} requests a warning if these extensions | |
c1f7febf RK |
1523 | are used. |
1524 | ||
1525 | @node Initializers | |
1526 | @section Non-Constant Initializers | |
1527 | @cindex initializers, non-constant | |
1528 | @cindex non-constant initializers | |
1529 | ||
4b404517 | 1530 | As in standard C++ and ISO C99, the elements of an aggregate initializer for an |
161d7b59 | 1531 | automatic variable are not required to be constant expressions in GNU C@. |
c1f7febf RK |
1532 | Here is an example of an initializer with run-time varying elements: |
1533 | ||
1534 | @example | |
1535 | foo (float f, float g) | |
1536 | @{ | |
1537 | float beat_freqs[2] = @{ f-g, f+g @}; | |
1538 | @dots{} | |
1539 | @} | |
1540 | @end example | |
1541 | ||
4b404517 JM |
1542 | @node Compound Literals |
1543 | @section Compound Literals | |
c1f7febf RK |
1544 | @cindex constructor expressions |
1545 | @cindex initializations in expressions | |
1546 | @cindex structures, constructor expression | |
1547 | @cindex expressions, constructor | |
4b404517 JM |
1548 | @cindex compound literals |
1549 | @c The GNU C name for what C99 calls compound literals was "constructor expressions". | |
c1f7febf | 1550 | |
4b404517 | 1551 | ISO C99 supports compound literals. A compound literal looks like |
c1f7febf RK |
1552 | a cast containing an initializer. Its value is an object of the |
1553 | type specified in the cast, containing the elements specified in | |
db3acfa5 JM |
1554 | the initializer; it is an lvalue. As an extension, GCC supports |
1555 | compound literals in C89 mode and in C++. | |
c1f7febf RK |
1556 | |
1557 | Usually, the specified type is a structure. Assume that | |
1558 | @code{struct foo} and @code{structure} are declared as shown: | |
1559 | ||
1560 | @example | |
1561 | struct foo @{int a; char b[2];@} structure; | |
1562 | @end example | |
1563 | ||
1564 | @noindent | |
4b404517 | 1565 | Here is an example of constructing a @code{struct foo} with a compound literal: |
c1f7febf RK |
1566 | |
1567 | @example | |
1568 | structure = ((struct foo) @{x + y, 'a', 0@}); | |
1569 | @end example | |
1570 | ||
1571 | @noindent | |
1572 | This is equivalent to writing the following: | |
1573 | ||
1574 | @example | |
1575 | @{ | |
1576 | struct foo temp = @{x + y, 'a', 0@}; | |
1577 | structure = temp; | |
1578 | @} | |
1579 | @end example | |
1580 | ||
4b404517 | 1581 | You can also construct an array. If all the elements of the compound literal |
c1f7febf | 1582 | are (made up of) simple constant expressions, suitable for use in |
db3acfa5 JM |
1583 | initializers of objects of static storage duration, then the compound |
1584 | literal can be coerced to a pointer to its first element and used in | |
1585 | such an initializer, as shown here: | |
c1f7febf RK |
1586 | |
1587 | @example | |
1588 | char **foo = (char *[]) @{ "x", "y", "z" @}; | |
1589 | @end example | |
1590 | ||
4b404517 JM |
1591 | Compound literals for scalar types and union types are is |
1592 | also allowed, but then the compound literal is equivalent | |
c1f7febf RK |
1593 | to a cast. |
1594 | ||
59c83dbf JJ |
1595 | As a GNU extension, GCC allows initialization of objects with static storage |
1596 | duration by compound literals (which is not possible in ISO C99, because | |
1597 | the initializer is not a constant). | |
1598 | It is handled as if the object was initialized only with the bracket | |
1599 | enclosed list if compound literal's and object types match. | |
1600 | The initializer list of the compound literal must be constant. | |
1601 | If the object being initialized has array type of unknown size, the size is | |
ad47f1e5 | 1602 | determined by compound literal size. |
59c83dbf JJ |
1603 | |
1604 | @example | |
1605 | static struct foo x = (struct foo) @{1, 'a', 'b'@}; | |
1606 | static int y[] = (int []) @{1, 2, 3@}; | |
1607 | static int z[] = (int [3]) @{1@}; | |
1608 | @end example | |
1609 | ||
1610 | @noindent | |
1611 | The above lines are equivalent to the following: | |
1612 | @example | |
1613 | static struct foo x = @{1, 'a', 'b'@}; | |
1614 | static int y[] = @{1, 2, 3@}; | |
ad47f1e5 | 1615 | static int z[] = @{1, 0, 0@}; |
59c83dbf JJ |
1616 | @end example |
1617 | ||
4b404517 JM |
1618 | @node Designated Inits |
1619 | @section Designated Initializers | |
c1f7febf RK |
1620 | @cindex initializers with labeled elements |
1621 | @cindex labeled elements in initializers | |
1622 | @cindex case labels in initializers | |
4b404517 | 1623 | @cindex designated initializers |
c1f7febf | 1624 | |
26d4fec7 | 1625 | Standard C89 requires the elements of an initializer to appear in a fixed |
c1f7febf RK |
1626 | order, the same as the order of the elements in the array or structure |
1627 | being initialized. | |
1628 | ||
26d4fec7 JM |
1629 | In ISO C99 you can give the elements in any order, specifying the array |
1630 | indices or structure field names they apply to, and GNU C allows this as | |
1631 | an extension in C89 mode as well. This extension is not | |
c1f7febf RK |
1632 | implemented in GNU C++. |
1633 | ||
26d4fec7 | 1634 | To specify an array index, write |
c1f7febf RK |
1635 | @samp{[@var{index}] =} before the element value. For example, |
1636 | ||
1637 | @example | |
26d4fec7 | 1638 | int a[6] = @{ [4] = 29, [2] = 15 @}; |
c1f7febf RK |
1639 | @end example |
1640 | ||
1641 | @noindent | |
1642 | is equivalent to | |
1643 | ||
1644 | @example | |
1645 | int a[6] = @{ 0, 0, 15, 0, 29, 0 @}; | |
1646 | @end example | |
1647 | ||
1648 | @noindent | |
1649 | The index values must be constant expressions, even if the array being | |
1650 | initialized is automatic. | |
1651 | ||
26d4fec7 JM |
1652 | An alternative syntax for this which has been obsolete since GCC 2.5 but |
1653 | GCC still accepts is to write @samp{[@var{index}]} before the element | |
1654 | value, with no @samp{=}. | |
1655 | ||
c1f7febf | 1656 | To initialize a range of elements to the same value, write |
26d4fec7 JM |
1657 | @samp{[@var{first} ... @var{last}] = @var{value}}. This is a GNU |
1658 | extension. For example, | |
c1f7febf RK |
1659 | |
1660 | @example | |
1661 | int widths[] = @{ [0 ... 9] = 1, [10 ... 99] = 2, [100] = 3 @}; | |
1662 | @end example | |
1663 | ||
8b6a5902 JJ |
1664 | @noindent |
1665 | If the value in it has side-effects, the side-effects will happen only once, | |
1666 | not for each initialized field by the range initializer. | |
1667 | ||
c1f7febf RK |
1668 | @noindent |
1669 | Note that the length of the array is the highest value specified | |
1670 | plus one. | |
1671 | ||
1672 | In a structure initializer, specify the name of a field to initialize | |
26d4fec7 | 1673 | with @samp{.@var{fieldname} =} before the element value. For example, |
c1f7febf RK |
1674 | given the following structure, |
1675 | ||
1676 | @example | |
1677 | struct point @{ int x, y; @}; | |
1678 | @end example | |
1679 | ||
1680 | @noindent | |
1681 | the following initialization | |
1682 | ||
1683 | @example | |
26d4fec7 | 1684 | struct point p = @{ .y = yvalue, .x = xvalue @}; |
c1f7febf RK |
1685 | @end example |
1686 | ||
1687 | @noindent | |
1688 | is equivalent to | |
1689 | ||
1690 | @example | |
1691 | struct point p = @{ xvalue, yvalue @}; | |
1692 | @end example | |
1693 | ||
26d4fec7 JM |
1694 | Another syntax which has the same meaning, obsolete since GCC 2.5, is |
1695 | @samp{@var{fieldname}:}, as shown here: | |
c1f7febf RK |
1696 | |
1697 | @example | |
26d4fec7 | 1698 | struct point p = @{ y: yvalue, x: xvalue @}; |
c1f7febf RK |
1699 | @end example |
1700 | ||
4b404517 JM |
1701 | @cindex designators |
1702 | The @samp{[@var{index}]} or @samp{.@var{fieldname}} is known as a | |
1703 | @dfn{designator}. You can also use a designator (or the obsolete colon | |
1704 | syntax) when initializing a union, to specify which element of the union | |
1705 | should be used. For example, | |
c1f7febf RK |
1706 | |
1707 | @example | |
1708 | union foo @{ int i; double d; @}; | |
1709 | ||
26d4fec7 | 1710 | union foo f = @{ .d = 4 @}; |
c1f7febf RK |
1711 | @end example |
1712 | ||
1713 | @noindent | |
1714 | will convert 4 to a @code{double} to store it in the union using | |
1715 | the second element. By contrast, casting 4 to type @code{union foo} | |
1716 | would store it into the union as the integer @code{i}, since it is | |
1717 | an integer. (@xref{Cast to Union}.) | |
1718 | ||
1719 | You can combine this technique of naming elements with ordinary C | |
1720 | initialization of successive elements. Each initializer element that | |
4b404517 | 1721 | does not have a designator applies to the next consecutive element of the |
c1f7febf RK |
1722 | array or structure. For example, |
1723 | ||
1724 | @example | |
1725 | int a[6] = @{ [1] = v1, v2, [4] = v4 @}; | |
1726 | @end example | |
1727 | ||
1728 | @noindent | |
1729 | is equivalent to | |
1730 | ||
1731 | @example | |
1732 | int a[6] = @{ 0, v1, v2, 0, v4, 0 @}; | |
1733 | @end example | |
1734 | ||
1735 | Labeling the elements of an array initializer is especially useful | |
1736 | when the indices are characters or belong to an @code{enum} type. | |
1737 | For example: | |
1738 | ||
1739 | @example | |
1740 | int whitespace[256] | |
1741 | = @{ [' '] = 1, ['\t'] = 1, ['\h'] = 1, | |
1742 | ['\f'] = 1, ['\n'] = 1, ['\r'] = 1 @}; | |
1743 | @end example | |
1744 | ||
4b404517 | 1745 | @cindex designator lists |
26d4fec7 | 1746 | You can also write a series of @samp{.@var{fieldname}} and |
4b404517 | 1747 | @samp{[@var{index}]} designators before an @samp{=} to specify a |
26d4fec7 JM |
1748 | nested subobject to initialize; the list is taken relative to the |
1749 | subobject corresponding to the closest surrounding brace pair. For | |
1750 | example, with the @samp{struct point} declaration above: | |
1751 | ||
1752 | @example | |
1753 | struct point ptarray[10] = @{ [2].y = yv2, [2].x = xv2, [0].x = xv0 @}; | |
1754 | @end example | |
1755 | ||
8b6a5902 JJ |
1756 | @noindent |
1757 | If the same field is initialized multiple times, it will have value from | |
1758 | the last initialization. If any such overridden initialization has | |
1759 | side-effect, it is unspecified whether the side-effect happens or not. | |
1760 | Currently, gcc will discard them and issue a warning. | |
1761 | ||
c1f7febf RK |
1762 | @node Case Ranges |
1763 | @section Case Ranges | |
1764 | @cindex case ranges | |
1765 | @cindex ranges in case statements | |
1766 | ||
1767 | You can specify a range of consecutive values in a single @code{case} label, | |
1768 | like this: | |
1769 | ||
1770 | @example | |
1771 | case @var{low} ... @var{high}: | |
1772 | @end example | |
1773 | ||
1774 | @noindent | |
1775 | This has the same effect as the proper number of individual @code{case} | |
1776 | labels, one for each integer value from @var{low} to @var{high}, inclusive. | |
1777 | ||
1778 | This feature is especially useful for ranges of ASCII character codes: | |
1779 | ||
1780 | @example | |
1781 | case 'A' ... 'Z': | |
1782 | @end example | |
1783 | ||
1784 | @strong{Be careful:} Write spaces around the @code{...}, for otherwise | |
1785 | it may be parsed wrong when you use it with integer values. For example, | |
1786 | write this: | |
1787 | ||
1788 | @example | |
1789 | case 1 ... 5: | |
1790 | @end example | |
1791 | ||
1792 | @noindent | |
1793 | rather than this: | |
1794 | ||
1795 | @example | |
1796 | case 1...5: | |
1797 | @end example | |
1798 | ||
1799 | @node Cast to Union | |
1800 | @section Cast to a Union Type | |
1801 | @cindex cast to a union | |
1802 | @cindex union, casting to a | |
1803 | ||
1804 | A cast to union type is similar to other casts, except that the type | |
1805 | specified is a union type. You can specify the type either with | |
1806 | @code{union @var{tag}} or with a typedef name. A cast to union is actually | |
1807 | a constructor though, not a cast, and hence does not yield an lvalue like | |
4b404517 | 1808 | normal casts. (@xref{Compound Literals}.) |
c1f7febf RK |
1809 | |
1810 | The types that may be cast to the union type are those of the members | |
1811 | of the union. Thus, given the following union and variables: | |
1812 | ||
1813 | @example | |
1814 | union foo @{ int i; double d; @}; | |
1815 | int x; | |
1816 | double y; | |
1817 | @end example | |
1818 | ||
1819 | @noindent | |
aee96fe9 | 1820 | both @code{x} and @code{y} can be cast to type @code{union foo}. |
c1f7febf RK |
1821 | |
1822 | Using the cast as the right-hand side of an assignment to a variable of | |
1823 | union type is equivalent to storing in a member of the union: | |
1824 | ||
1825 | @example | |
1826 | union foo u; | |
1827 | @dots{} | |
1828 | u = (union foo) x @equiv{} u.i = x | |
1829 | u = (union foo) y @equiv{} u.d = y | |
1830 | @end example | |
1831 | ||
1832 | You can also use the union cast as a function argument: | |
1833 | ||
1834 | @example | |
1835 | void hack (union foo); | |
1836 | @dots{} | |
1837 | hack ((union foo) x); | |
1838 | @end example | |
1839 | ||
4b404517 JM |
1840 | @node Mixed Declarations |
1841 | @section Mixed Declarations and Code | |
1842 | @cindex mixed declarations and code | |
1843 | @cindex declarations, mixed with code | |
1844 | @cindex code, mixed with declarations | |
1845 | ||
1846 | ISO C99 and ISO C++ allow declarations and code to be freely mixed | |
1847 | within compound statements. As an extension, GCC also allows this in | |
1848 | C89 mode. For example, you could do: | |
1849 | ||
1850 | @example | |
1851 | int i; | |
1852 | @dots{} | |
1853 | i++; | |
1854 | int j = i + 2; | |
1855 | @end example | |
1856 | ||
1857 | Each identifier is visible from where it is declared until the end of | |
1858 | the enclosing block. | |
1859 | ||
c1f7febf RK |
1860 | @node Function Attributes |
1861 | @section Declaring Attributes of Functions | |
1862 | @cindex function attributes | |
1863 | @cindex declaring attributes of functions | |
1864 | @cindex functions that never return | |
1865 | @cindex functions that have no side effects | |
1866 | @cindex functions in arbitrary sections | |
2a59078d | 1867 | @cindex functions that behave like malloc |
c1f7febf RK |
1868 | @cindex @code{volatile} applied to function |
1869 | @cindex @code{const} applied to function | |
26f6672d | 1870 | @cindex functions with @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style arguments |
c1f7febf RK |
1871 | @cindex functions that are passed arguments in registers on the 386 |
1872 | @cindex functions that pop the argument stack on the 386 | |
1873 | @cindex functions that do not pop the argument stack on the 386 | |
1874 | ||
1875 | In GNU C, you declare certain things about functions called in your program | |
1876 | which help the compiler optimize function calls and check your code more | |
1877 | carefully. | |
1878 | ||
1879 | The keyword @code{__attribute__} allows you to specify special | |
1880 | attributes when making a declaration. This keyword is followed by an | |
9162542e | 1881 | attribute specification inside double parentheses. The following |
eacecf96 | 1882 | attributes are currently defined for functions on all targets: |
6aa77e6c AH |
1883 | @code{noreturn}, @code{noinline}, @code{always_inline}, |
1884 | @code{pure}, @code{const}, | |
9162542e AO |
1885 | @code{format}, @code{format_arg}, @code{no_instrument_function}, |
1886 | @code{section}, @code{constructor}, @code{destructor}, @code{used}, | |
e23bd218 IR |
1887 | @code{unused}, @code{deprecated}, @code{weak}, @code{malloc}, and |
1888 | @code{alias}. Several other attributes are defined for functions on | |
1889 | particular target systems. Other attributes, including @code{section} | |
1890 | are supported for variables declarations (@pxref{Variable Attributes}) | |
1891 | and for types (@pxref{Type Attributes}). | |
c1f7febf RK |
1892 | |
1893 | You may also specify attributes with @samp{__} preceding and following | |
1894 | each keyword. This allows you to use them in header files without | |
1895 | being concerned about a possible macro of the same name. For example, | |
1896 | you may use @code{__noreturn__} instead of @code{noreturn}. | |
1897 | ||
2c5e91d2 JM |
1898 | @xref{Attribute Syntax}, for details of the exact syntax for using |
1899 | attributes. | |
1900 | ||
c1f7febf RK |
1901 | @table @code |
1902 | @cindex @code{noreturn} function attribute | |
1903 | @item noreturn | |
1904 | A few standard library functions, such as @code{abort} and @code{exit}, | |
f0523f02 | 1905 | cannot return. GCC knows this automatically. Some programs define |
c1f7febf RK |
1906 | their own functions that never return. You can declare them |
1907 | @code{noreturn} to tell the compiler this fact. For example, | |
1908 | ||
1909 | @smallexample | |
aee96fe9 | 1910 | @group |
c1f7febf RK |
1911 | void fatal () __attribute__ ((noreturn)); |
1912 | ||
1913 | void | |
1914 | fatal (@dots{}) | |
1915 | @{ | |
1916 | @dots{} /* @r{Print error message.} */ @dots{} | |
1917 | exit (1); | |
1918 | @} | |
aee96fe9 | 1919 | @end group |
c1f7febf RK |
1920 | @end smallexample |
1921 | ||
1922 | The @code{noreturn} keyword tells the compiler to assume that | |
1923 | @code{fatal} cannot return. It can then optimize without regard to what | |
1924 | would happen if @code{fatal} ever did return. This makes slightly | |
1925 | better code. More importantly, it helps avoid spurious warnings of | |
1926 | uninitialized variables. | |
1927 | ||
1928 | Do not assume that registers saved by the calling function are | |
1929 | restored before calling the @code{noreturn} function. | |
1930 | ||
1931 | It does not make sense for a @code{noreturn} function to have a return | |
1932 | type other than @code{void}. | |
1933 | ||
f0523f02 | 1934 | The attribute @code{noreturn} is not implemented in GCC versions |
c1f7febf RK |
1935 | earlier than 2.5. An alternative way to declare that a function does |
1936 | not return, which works in the current version and in some older | |
1937 | versions, is as follows: | |
1938 | ||
1939 | @smallexample | |
1940 | typedef void voidfn (); | |
1941 | ||
1942 | volatile voidfn fatal; | |
1943 | @end smallexample | |
1944 | ||
9162542e AO |
1945 | @cindex @code{noinline} function attribute |
1946 | @item noinline | |
1947 | This function attribute prevents a function from being considered for | |
1948 | inlining. | |
1949 | ||
6aa77e6c AH |
1950 | @cindex @code{always_inline} function attribute |
1951 | @item always_inline | |
1952 | Generally, functions are not inlined unless optimization is specified. | |
1953 | For functions declared inline, this attribute inlines the function even | |
1954 | if no optimization level was specified. | |
1955 | ||
2a8f6b90 JH |
1956 | @cindex @code{pure} function attribute |
1957 | @item pure | |
1958 | Many functions have no effects except the return value and their | |
d4047e24 | 1959 | return value depends only on the parameters and/or global variables. |
2a8f6b90 | 1960 | Such a function can be subject |
c1f7febf RK |
1961 | to common subexpression elimination and loop optimization just as an |
1962 | arithmetic operator would be. These functions should be declared | |
2a8f6b90 | 1963 | with the attribute @code{pure}. For example, |
c1f7febf RK |
1964 | |
1965 | @smallexample | |
2a8f6b90 | 1966 | int square (int) __attribute__ ((pure)); |
c1f7febf RK |
1967 | @end smallexample |
1968 | ||
1969 | @noindent | |
1970 | says that the hypothetical function @code{square} is safe to call | |
1971 | fewer times than the program says. | |
1972 | ||
2a8f6b90 JH |
1973 | Some of common examples of pure functions are @code{strlen} or @code{memcmp}. |
1974 | Interesting non-pure functions are functions with infinite loops or those | |
1975 | depending on volatile memory or other system resource, that may change between | |
2a59078d | 1976 | two consecutive calls (such as @code{feof} in a multithreading environment). |
2a8f6b90 | 1977 | |
f0523f02 | 1978 | The attribute @code{pure} is not implemented in GCC versions earlier |
2a8f6b90 JH |
1979 | than 2.96. |
1980 | @cindex @code{const} function attribute | |
1981 | @item const | |
1982 | Many functions do not examine any values except their arguments, and | |
1983 | have no effects except the return value. Basically this is just slightly | |
84330467 | 1984 | more strict class than the @code{pure} attribute above, since function is not |
2a59078d | 1985 | allowed to read global memory. |
2a8f6b90 JH |
1986 | |
1987 | @cindex pointer arguments | |
1988 | Note that a function that has pointer arguments and examines the data | |
1989 | pointed to must @emph{not} be declared @code{const}. Likewise, a | |
1990 | function that calls a non-@code{const} function usually must not be | |
1991 | @code{const}. It does not make sense for a @code{const} function to | |
1992 | return @code{void}. | |
1993 | ||
f0523f02 | 1994 | The attribute @code{const} is not implemented in GCC versions earlier |
c1f7febf RK |
1995 | than 2.5. An alternative way to declare that a function has no side |
1996 | effects, which works in the current version and in some older versions, | |
1997 | is as follows: | |
1998 | ||
1999 | @smallexample | |
2000 | typedef int intfn (); | |
2001 | ||
2002 | extern const intfn square; | |
2003 | @end smallexample | |
2004 | ||
2005 | This approach does not work in GNU C++ from 2.6.0 on, since the language | |
2006 | specifies that the @samp{const} must be attached to the return value. | |
2007 | ||
c1f7febf RK |
2008 | |
2009 | @item format (@var{archetype}, @var{string-index}, @var{first-to-check}) | |
2010 | @cindex @code{format} function attribute | |
84330467 | 2011 | @opindex Wformat |
bb72a084 | 2012 | The @code{format} attribute specifies that a function takes @code{printf}, |
26f6672d JM |
2013 | @code{scanf}, @code{strftime} or @code{strfmon} style arguments which |
2014 | should be type-checked against a format string. For example, the | |
2015 | declaration: | |
c1f7febf RK |
2016 | |
2017 | @smallexample | |
2018 | extern int | |
2019 | my_printf (void *my_object, const char *my_format, ...) | |
2020 | __attribute__ ((format (printf, 2, 3))); | |
2021 | @end smallexample | |
2022 | ||
2023 | @noindent | |
2024 | causes the compiler to check the arguments in calls to @code{my_printf} | |
2025 | for consistency with the @code{printf} style format string argument | |
2026 | @code{my_format}. | |
2027 | ||
2028 | The parameter @var{archetype} determines how the format string is | |
26f6672d JM |
2029 | interpreted, and should be @code{printf}, @code{scanf}, @code{strftime} |
2030 | or @code{strfmon}. (You can also use @code{__printf__}, | |
2031 | @code{__scanf__}, @code{__strftime__} or @code{__strfmon__}.) The | |
c1f7febf RK |
2032 | parameter @var{string-index} specifies which argument is the format |
2033 | string argument (starting from 1), while @var{first-to-check} is the | |
2034 | number of the first argument to check against the format string. For | |
2035 | functions where the arguments are not available to be checked (such as | |
2036 | @code{vprintf}), specify the third parameter as zero. In this case the | |
b722c82c JM |
2037 | compiler only checks the format string for consistency. For |
2038 | @code{strftime} formats, the third parameter is required to be zero. | |
c1f7febf RK |
2039 | |
2040 | In the example above, the format string (@code{my_format}) is the second | |
2041 | argument of the function @code{my_print}, and the arguments to check | |
2042 | start with the third argument, so the correct parameters for the format | |
2043 | attribute are 2 and 3. | |
2044 | ||
84330467 | 2045 | @opindex ffreestanding |
c1f7febf | 2046 | The @code{format} attribute allows you to identify your own functions |
f0523f02 | 2047 | which take format strings as arguments, so that GCC can check the |
b722c82c | 2048 | calls to these functions for errors. The compiler always (unless |
84330467 | 2049 | @option{-ffreestanding} is used) checks formats |
b722c82c | 2050 | for the standard library functions @code{printf}, @code{fprintf}, |
bb72a084 | 2051 | @code{sprintf}, @code{scanf}, @code{fscanf}, @code{sscanf}, @code{strftime}, |
c1f7febf | 2052 | @code{vprintf}, @code{vfprintf} and @code{vsprintf} whenever such |
84330467 | 2053 | warnings are requested (using @option{-Wformat}), so there is no need to |
b722c82c JM |
2054 | modify the header file @file{stdio.h}. In C99 mode, the functions |
2055 | @code{snprintf}, @code{vsnprintf}, @code{vscanf}, @code{vfscanf} and | |
26f6672d | 2056 | @code{vsscanf} are also checked. Except in strictly conforming C |
b4c984fb KG |
2057 | standard modes, the X/Open function @code{strfmon} is also checked as |
2058 | are @code{printf_unlocked} and @code{fprintf_unlocked}. | |
b722c82c | 2059 | @xref{C Dialect Options,,Options Controlling C Dialect}. |
c1f7febf RK |
2060 | |
2061 | @item format_arg (@var{string-index}) | |
2062 | @cindex @code{format_arg} function attribute | |
84330467 | 2063 | @opindex Wformat-nonliteral |
26f6672d JM |
2064 | The @code{format_arg} attribute specifies that a function takes a format |
2065 | string for a @code{printf}, @code{scanf}, @code{strftime} or | |
2066 | @code{strfmon} style function and modifies it (for example, to translate | |
2067 | it into another language), so the result can be passed to a | |
2068 | @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} style | |
2069 | function (with the remaining arguments to the format function the same | |
2070 | as they would have been for the unmodified string). For example, the | |
2071 | declaration: | |
c1f7febf RK |
2072 | |
2073 | @smallexample | |
2074 | extern char * | |
2075 | my_dgettext (char *my_domain, const char *my_format) | |
2076 | __attribute__ ((format_arg (2))); | |
2077 | @end smallexample | |
2078 | ||
2079 | @noindent | |
26f6672d JM |
2080 | causes the compiler to check the arguments in calls to a @code{printf}, |
2081 | @code{scanf}, @code{strftime} or @code{strfmon} type function, whose | |
2082 | format string argument is a call to the @code{my_dgettext} function, for | |
2083 | consistency with the format string argument @code{my_format}. If the | |
2084 | @code{format_arg} attribute had not been specified, all the compiler | |
2085 | could tell in such calls to format functions would be that the format | |
2086 | string argument is not constant; this would generate a warning when | |
84330467 | 2087 | @option{-Wformat-nonliteral} is used, but the calls could not be checked |
26f6672d | 2088 | without the attribute. |
c1f7febf RK |
2089 | |
2090 | The parameter @var{string-index} specifies which argument is the format | |
2091 | string argument (starting from 1). | |
2092 | ||
2093 | The @code{format-arg} attribute allows you to identify your own | |
f0523f02 | 2094 | functions which modify format strings, so that GCC can check the |
26f6672d JM |
2095 | calls to @code{printf}, @code{scanf}, @code{strftime} or @code{strfmon} |
2096 | type function whose operands are a call to one of your own function. | |
2097 | The compiler always treats @code{gettext}, @code{dgettext}, and | |
2098 | @code{dcgettext} in this manner except when strict ISO C support is | |
84330467 JM |
2099 | requested by @option{-ansi} or an appropriate @option{-std} option, or |
2100 | @option{-ffreestanding} is used. @xref{C Dialect Options,,Options | |
26f6672d | 2101 | Controlling C Dialect}. |
c1f7febf | 2102 | |
07417085 KR |
2103 | @item no_instrument_function |
2104 | @cindex @code{no_instrument_function} function attribute | |
84330467 JM |
2105 | @opindex finstrument-functions |
2106 | If @option{-finstrument-functions} is given, profiling function calls will | |
07417085 KR |
2107 | be generated at entry and exit of most user-compiled functions. |
2108 | Functions with this attribute will not be so instrumented. | |
2109 | ||
84330467 | 2110 | @item section ("@var{section-name}") |
c1f7febf RK |
2111 | @cindex @code{section} function attribute |
2112 | Normally, the compiler places the code it generates in the @code{text} section. | |
2113 | Sometimes, however, you need additional sections, or you need certain | |
2114 | particular functions to appear in special sections. The @code{section} | |
2115 | attribute specifies that a function lives in a particular section. | |
2116 | For example, the declaration: | |
2117 | ||
2118 | @smallexample | |
2119 | extern void foobar (void) __attribute__ ((section ("bar"))); | |
2120 | @end smallexample | |
2121 | ||
2122 | @noindent | |
2123 | puts the function @code{foobar} in the @code{bar} section. | |
2124 | ||
2125 | Some file formats do not support arbitrary sections so the @code{section} | |
2126 | attribute is not available on all platforms. | |
2127 | If you need to map the entire contents of a module to a particular | |
2128 | section, consider using the facilities of the linker instead. | |
2129 | ||
2130 | @item constructor | |
2131 | @itemx destructor | |
2132 | @cindex @code{constructor} function attribute | |
2133 | @cindex @code{destructor} function attribute | |
2134 | The @code{constructor} attribute causes the function to be called | |
2135 | automatically before execution enters @code{main ()}. Similarly, the | |
2136 | @code{destructor} attribute causes the function to be called | |
2137 | automatically after @code{main ()} has completed or @code{exit ()} has | |
2138 | been called. Functions with these attributes are useful for | |
2139 | initializing data that will be used implicitly during the execution of | |
2140 | the program. | |
2141 | ||
161d7b59 | 2142 | These attributes are not currently implemented for Objective-C@. |
c1f7febf | 2143 | |
9162542e | 2144 | @cindex @code{unused} attribute. |
c1f7febf RK |
2145 | @item unused |
2146 | This attribute, attached to a function, means that the function is meant | |
f0523f02 | 2147 | to be possibly unused. GCC will not produce a warning for this |
c1f7febf RK |
2148 | function. GNU C++ does not currently support this attribute as |
2149 | definitions without parameters are valid in C++. | |
2150 | ||
9162542e AO |
2151 | @cindex @code{used} attribute. |
2152 | @item used | |
2153 | This attribute, attached to a function, means that code must be emitted | |
2154 | for the function even if it appears that the function is not referenced. | |
2155 | This is useful, for example, when the function is referenced only in | |
2156 | inline assembly. | |
2157 | ||
e23bd218 IR |
2158 | @cindex @code{deprecated} attribute. |
2159 | @item deprecated | |
2160 | The @code{deprecated} attribute results in a warning if the function | |
2161 | is used anywhere in the source file. This is useful when identifying | |
2162 | functions that are expected to be removed in a future version of a | |
2163 | program. The warning also includes the location of the declaration | |
2164 | of the deprecated function, to enable users to easily find further | |
2165 | information about why the function is deprecated, or what they should | |
2166 | do instead. Note that the warnings only occurs for uses: | |
2167 | ||
2168 | @smallexample | |
2169 | int old_fn () __attribute__ ((deprecated)); | |
2170 | int old_fn (); | |
2171 | int (*fn_ptr)() = old_fn; | |
2172 | @end smallexample | |
2173 | ||
2174 | results in a warning on line 3 but not line 2. | |
2175 | ||
2176 | The @code{deprecated} attribute can also be used for variables and | |
2177 | types (@pxref{Variable Attributes}, @pxref{Type Attributes}.) | |
2178 | ||
c1f7febf RK |
2179 | @item weak |
2180 | @cindex @code{weak} attribute | |
2181 | The @code{weak} attribute causes the declaration to be emitted as a weak | |
2182 | symbol rather than a global. This is primarily useful in defining | |
2183 | library functions which can be overridden in user code, though it can | |
2184 | also be used with non-function declarations. Weak symbols are supported | |
2185 | for ELF targets, and also for a.out targets when using the GNU assembler | |
2186 | and linker. | |
2187 | ||
140592a0 AG |
2188 | @item malloc |
2189 | @cindex @code{malloc} attribute | |
2190 | The @code{malloc} attribute is used to tell the compiler that a function | |
2191 | may be treated as if it were the malloc function. The compiler assumes | |
2192 | that calls to malloc result in a pointers that cannot alias anything. | |
2193 | This will often improve optimization. | |
2194 | ||
84330467 | 2195 | @item alias ("@var{target}") |
c1f7febf RK |
2196 | @cindex @code{alias} attribute |
2197 | The @code{alias} attribute causes the declaration to be emitted as an | |
2198 | alias for another symbol, which must be specified. For instance, | |
2199 | ||
2200 | @smallexample | |
47bd70b5 | 2201 | void __f () @{ /* @r{Do something.} */; @} |
c1f7febf RK |
2202 | void f () __attribute__ ((weak, alias ("__f"))); |
2203 | @end smallexample | |
2204 | ||
2205 | declares @samp{f} to be a weak alias for @samp{__f}. In C++, the | |
2206 | mangled name for the target must be used. | |
2207 | ||
af3e86c2 RK |
2208 | Not all target machines support this attribute. |
2209 | ||
47bd70b5 JJ |
2210 | @item visibility ("@var{visibility_type}") |
2211 | @cindex @code{visibility} attribute | |
2212 | The @code{visibility} attribute on ELF targets causes the declaration | |
2213 | to be emitted with hidden, protected or internal visibility. | |
2214 | ||
2215 | @smallexample | |
2216 | void __attribute__ ((visibility ("protected"))) | |
2217 | f () @{ /* @r{Do something.} */; @} | |
2218 | int i __attribute__ ((visibility ("hidden"))); | |
2219 | @end smallexample | |
2220 | ||
9e8aab55 RH |
2221 | See the ELF gABI for complete details, but the short story is |
2222 | ||
2223 | @table @dfn | |
2224 | @item hidden | |
2225 | Hidden visibility indicates that the symbol will not be placed into | |
2226 | the dynamic symbol table, so no other @dfn{module} (executable or | |
2227 | shared library) can reference it directly. | |
2228 | ||
2229 | @item protected | |
2230 | Protected visibility indicates that the symbol will be placed in the | |
2231 | dynamic symbol table, but that references within the defining module | |
2232 | will bind to the local symbol. That is, the symbol cannot be overridden | |
2233 | by another module. | |
2234 | ||
2235 | @item internal | |
2236 | Internal visibility is like hidden visibility, but with additional | |
2237 | processor specific semantics. Unless otherwise specified by the psABI, | |
2238 | gcc defines internal visibility to mean that the function is @emph{never} | |
2239 | called from another module. Note that hidden symbols, while then cannot | |
2240 | be referenced directly by other modules, can be referenced indirectly via | |
2241 | function pointers. By indicating that a symbol cannot be called from | |
2242 | outside the module, gcc may for instance omit the load of a PIC register | |
2243 | since it is known that the calling function loaded the correct value. | |
2244 | @end table | |
2245 | ||
47bd70b5 JJ |
2246 | Not all ELF targets support this attribute. |
2247 | ||
c1f7febf RK |
2248 | @item regparm (@var{number}) |
2249 | @cindex functions that are passed arguments in registers on the 386 | |
2250 | On the Intel 386, the @code{regparm} attribute causes the compiler to | |
84330467 JM |
2251 | pass up to @var{number} integer arguments in registers EAX, |
2252 | EDX, and ECX instead of on the stack. Functions that take a | |
c1f7febf RK |
2253 | variable number of arguments will continue to be passed all of their |
2254 | arguments on the stack. | |
2255 | ||
2256 | @item stdcall | |
2257 | @cindex functions that pop the argument stack on the 386 | |
2258 | On the Intel 386, the @code{stdcall} attribute causes the compiler to | |
2259 | assume that the called function will pop off the stack space used to | |
2260 | pass arguments, unless it takes a variable number of arguments. | |
2261 | ||
2262 | The PowerPC compiler for Windows NT currently ignores the @code{stdcall} | |
2263 | attribute. | |
2264 | ||
2265 | @item cdecl | |
2266 | @cindex functions that do pop the argument stack on the 386 | |
84330467 | 2267 | @opindex mrtd |
c1f7febf RK |
2268 | On the Intel 386, the @code{cdecl} attribute causes the compiler to |
2269 | assume that the calling function will pop off the stack space used to | |
2270 | pass arguments. This is | |
84330467 | 2271 | useful to override the effects of the @option{-mrtd} switch. |
c1f7febf RK |
2272 | |
2273 | The PowerPC compiler for Windows NT currently ignores the @code{cdecl} | |
2274 | attribute. | |
2275 | ||
a5c76ee6 | 2276 | @item longcall/shortcall |
c1f7febf RK |
2277 | @cindex functions called via pointer on the RS/6000 and PowerPC |
2278 | On the RS/6000 and PowerPC, the @code{longcall} attribute causes the | |
a5c76ee6 ZW |
2279 | compiler to always call this function via a pointer, just as it would if |
2280 | the @option{-mlongcall} option had been specified. The @code{shortcall} | |
2281 | attribute causes the compiler not to do this. These attributes override | |
2282 | both the @option{-mlongcall} switch and the @code{#pragma longcall} | |
2283 | setting. | |
2284 | ||
2285 | @xref{RS/6000 and PowerPC Options}, for more information on when long | |
2286 | calls are and are not necessary. | |
c1f7febf | 2287 | |
c27ba912 DM |
2288 | @item long_call/short_call |
2289 | @cindex indirect calls on ARM | |
2290 | This attribute allows to specify how to call a particular function on | |
161d7b59 | 2291 | ARM@. Both attributes override the @option{-mlong-calls} (@pxref{ARM Options}) |
c27ba912 DM |
2292 | command line switch and @code{#pragma long_calls} settings. The |
2293 | @code{long_call} attribute causes the compiler to always call the | |
2294 | function by first loading its address into a register and then using the | |
2295 | contents of that register. The @code{short_call} attribute always places | |
2296 | the offset to the function from the call site into the @samp{BL} | |
2297 | instruction directly. | |
2298 | ||
c1f7febf RK |
2299 | @item dllimport |
2300 | @cindex functions which are imported from a dll on PowerPC Windows NT | |
2301 | On the PowerPC running Windows NT, the @code{dllimport} attribute causes | |
2302 | the compiler to call the function via a global pointer to the function | |
2303 | pointer that is set up by the Windows NT dll library. The pointer name | |
2304 | is formed by combining @code{__imp_} and the function name. | |
2305 | ||
2306 | @item dllexport | |
2307 | @cindex functions which are exported from a dll on PowerPC Windows NT | |
2308 | On the PowerPC running Windows NT, the @code{dllexport} attribute causes | |
2309 | the compiler to provide a global pointer to the function pointer, so | |
2310 | that it can be called with the @code{dllimport} attribute. The pointer | |
2311 | name is formed by combining @code{__imp_} and the function name. | |
2312 | ||
2313 | @item exception (@var{except-func} [, @var{except-arg}]) | |
2314 | @cindex functions which specify exception handling on PowerPC Windows NT | |
2315 | On the PowerPC running Windows NT, the @code{exception} attribute causes | |
2316 | the compiler to modify the structured exception table entry it emits for | |
2317 | the declared function. The string or identifier @var{except-func} is | |
2318 | placed in the third entry of the structured exception table. It | |
2319 | represents a function, which is called by the exception handling | |
2320 | mechanism if an exception occurs. If it was specified, the string or | |
2321 | identifier @var{except-arg} is placed in the fourth entry of the | |
2322 | structured exception table. | |
2323 | ||
2324 | @item function_vector | |
2325 | @cindex calling functions through the function vector on the H8/300 processors | |
88ab0d1c | 2326 | Use this attribute on the H8/300 and H8/300H to indicate that the specified |
c1f7febf RK |
2327 | function should be called through the function vector. Calling a |
2328 | function through the function vector will reduce code size, however; | |
2329 | the function vector has a limited size (maximum 128 entries on the H8/300 | |
2330 | and 64 entries on the H8/300H) and shares space with the interrupt vector. | |
2331 | ||
2332 | You must use GAS and GLD from GNU binutils version 2.7 or later for | |
88ab0d1c | 2333 | this attribute to work correctly. |
c1f7febf | 2334 | |
6d3d9133 NC |
2335 | @item interrupt |
2336 | @cindex interrupt handler functions | |
88ab0d1c | 2337 | Use this attribute on the ARM, AVR, M32R/D and Xstormy16 ports to indicate |
9f339dde GK |
2338 | that the specified function is an interrupt handler. The compiler will |
2339 | generate function entry and exit sequences suitable for use in an | |
2340 | interrupt handler when this attribute is present. | |
6d3d9133 | 2341 | |
b93e3893 AO |
2342 | Note, interrupt handlers for the H8/300, H8/300H and SH processors can |
2343 | be specified via the @code{interrupt_handler} attribute. | |
6d3d9133 NC |
2344 | |
2345 | Note, on the AVR interrupts will be enabled inside the function. | |
2346 | ||
2347 | Note, for the ARM you can specify the kind of interrupt to be handled by | |
2348 | adding an optional parameter to the interrupt attribute like this: | |
2349 | ||
2350 | @smallexample | |
2351 | void f () __attribute__ ((interrupt ("IRQ"))); | |
2352 | @end smallexample | |
2353 | ||
161d7b59 | 2354 | Permissible values for this parameter are: IRQ, FIQ, SWI, ABORT and UNDEF@. |
6d3d9133 | 2355 | |
b93e3893 AO |
2356 | @item interrupt_handler |
2357 | @cindex interrupt handler functions on the H8/300 and SH processors | |
88ab0d1c | 2358 | Use this attribute on the H8/300, H8/300H and SH to indicate that the |
b93e3893 AO |
2359 | specified function is an interrupt handler. The compiler will generate |
2360 | function entry and exit sequences suitable for use in an interrupt | |
2361 | handler when this attribute is present. | |
2362 | ||
2363 | @item sp_switch | |
88ab0d1c | 2364 | Use this attribute on the SH to indicate an @code{interrupt_handler} |
b93e3893 AO |
2365 | function should switch to an alternate stack. It expects a string |
2366 | argument that names a global variable holding the address of the | |
2367 | alternate stack. | |
2368 | ||
2369 | @smallexample | |
2370 | void *alt_stack; | |
aee96fe9 JM |
2371 | void f () __attribute__ ((interrupt_handler, |
2372 | sp_switch ("alt_stack"))); | |
b93e3893 AO |
2373 | @end smallexample |
2374 | ||
2375 | @item trap_exit | |
88ab0d1c | 2376 | Use this attribute on the SH for an @code{interrupt_handle} to return using |
b93e3893 AO |
2377 | @code{trapa} instead of @code{rte}. This attribute expects an integer |
2378 | argument specifying the trap number to be used. | |
2379 | ||
c1f7febf RK |
2380 | @item eightbit_data |
2381 | @cindex eight bit data on the H8/300 and H8/300H | |
88ab0d1c | 2382 | Use this attribute on the H8/300 and H8/300H to indicate that the specified |
c1f7febf RK |
2383 | variable should be placed into the eight bit data section. |
2384 | The compiler will generate more efficient code for certain operations | |
2385 | on data in the eight bit data area. Note the eight bit data area is limited to | |
2386 | 256 bytes of data. | |
2387 | ||
2388 | You must use GAS and GLD from GNU binutils version 2.7 or later for | |
88ab0d1c | 2389 | this attribute to work correctly. |
c1f7febf RK |
2390 | |
2391 | @item tiny_data | |
2392 | @cindex tiny data section on the H8/300H | |
88ab0d1c | 2393 | Use this attribute on the H8/300H to indicate that the specified |
c1f7febf RK |
2394 | variable should be placed into the tiny data section. |
2395 | The compiler will generate more efficient code for loads and stores | |
2396 | on data in the tiny data section. Note the tiny data area is limited to | |
2397 | slightly under 32kbytes of data. | |
845da534 | 2398 | |
052a4b28 DC |
2399 | @item signal |
2400 | @cindex signal handler functions on the AVR processors | |
88ab0d1c | 2401 | Use this attribute on the AVR to indicate that the specified |
052a4b28 DC |
2402 | function is an signal handler. The compiler will generate function |
2403 | entry and exit sequences suitable for use in an signal handler when this | |
767094dd | 2404 | attribute is present. Interrupts will be disabled inside function. |
052a4b28 DC |
2405 | |
2406 | @item naked | |
6d3d9133 | 2407 | @cindex function without a prologue/epilogue code |
88ab0d1c | 2408 | Use this attribute on the ARM or AVR ports to indicate that the specified |
6d3d9133 NC |
2409 | function do not need prologue/epilogue sequences generated by the |
2410 | compiler. It is up to the programmer to provide these sequences. | |
052a4b28 | 2411 | |
845da534 DE |
2412 | @item model (@var{model-name}) |
2413 | @cindex function addressability on the M32R/D | |
2414 | Use this attribute on the M32R/D to set the addressability of an object, | |
2415 | and the code generated for a function. | |
2416 | The identifier @var{model-name} is one of @code{small}, @code{medium}, | |
2417 | or @code{large}, representing each of the code models. | |
2418 | ||
2419 | Small model objects live in the lower 16MB of memory (so that their | |
2420 | addresses can be loaded with the @code{ld24} instruction), and are | |
2421 | callable with the @code{bl} instruction. | |
2422 | ||
02f52e19 | 2423 | Medium model objects may live anywhere in the 32-bit address space (the |
845da534 DE |
2424 | compiler will generate @code{seth/add3} instructions to load their addresses), |
2425 | and are callable with the @code{bl} instruction. | |
2426 | ||
02f52e19 | 2427 | Large model objects may live anywhere in the 32-bit address space (the |
845da534 DE |
2428 | compiler will generate @code{seth/add3} instructions to load their addresses), |
2429 | and may not be reachable with the @code{bl} instruction (the compiler will | |
2430 | generate the much slower @code{seth/add3/jl} instruction sequence). | |
2431 | ||
c1f7febf RK |
2432 | @end table |
2433 | ||
2434 | You can specify multiple attributes in a declaration by separating them | |
2435 | by commas within the double parentheses or by immediately following an | |
2436 | attribute declaration with another attribute declaration. | |
2437 | ||
2438 | @cindex @code{#pragma}, reason for not using | |
2439 | @cindex pragma, reason for not using | |
9f1bbeaa JM |
2440 | Some people object to the @code{__attribute__} feature, suggesting that |
2441 | ISO C's @code{#pragma} should be used instead. At the time | |
2442 | @code{__attribute__} was designed, there were two reasons for not doing | |
2443 | this. | |
c1f7febf RK |
2444 | |
2445 | @enumerate | |
2446 | @item | |
2447 | It is impossible to generate @code{#pragma} commands from a macro. | |
2448 | ||
2449 | @item | |
2450 | There is no telling what the same @code{#pragma} might mean in another | |
2451 | compiler. | |
2452 | @end enumerate | |
2453 | ||
9f1bbeaa JM |
2454 | These two reasons applied to almost any application that might have been |
2455 | proposed for @code{#pragma}. It was basically a mistake to use | |
2456 | @code{#pragma} for @emph{anything}. | |
2457 | ||
2458 | The ISO C99 standard includes @code{_Pragma}, which now allows pragmas | |
2459 | to be generated from macros. In addition, a @code{#pragma GCC} | |
2460 | namespace is now in use for GCC-specific pragmas. However, it has been | |
2461 | found convenient to use @code{__attribute__} to achieve a natural | |
2462 | attachment of attributes to their corresponding declarations, whereas | |
2463 | @code{#pragma GCC} is of use for constructs that do not naturally form | |
2464 | part of the grammar. @xref{Other Directives,,Miscellaneous | |
2465 | Preprocessing Directives, cpp, The C Preprocessor}. | |
c1f7febf | 2466 | |
2c5e91d2 JM |
2467 | @node Attribute Syntax |
2468 | @section Attribute Syntax | |
2469 | @cindex attribute syntax | |
2470 | ||
2471 | This section describes the syntax with which @code{__attribute__} may be | |
2472 | used, and the constructs to which attribute specifiers bind, for the C | |
161d7b59 | 2473 | language. Some details may vary for C++ and Objective-C@. Because of |
2c5e91d2 JM |
2474 | infelicities in the grammar for attributes, some forms described here |
2475 | may not be successfully parsed in all cases. | |
2476 | ||
91d231cb JM |
2477 | There are some problems with the semantics of attributes in C++. For |
2478 | example, there are no manglings for attributes, although they may affect | |
2479 | code generation, so problems may arise when attributed types are used in | |
2480 | conjunction with templates or overloading. Similarly, @code{typeid} | |
2481 | does not distinguish between types with different attributes. Support | |
2482 | for attributes in C++ may be restricted in future to attributes on | |
2483 | declarations only, but not on nested declarators. | |
2484 | ||
2c5e91d2 JM |
2485 | @xref{Function Attributes}, for details of the semantics of attributes |
2486 | applying to functions. @xref{Variable Attributes}, for details of the | |
2487 | semantics of attributes applying to variables. @xref{Type Attributes}, | |
2488 | for details of the semantics of attributes applying to structure, union | |
2489 | and enumerated types. | |
2490 | ||
2491 | An @dfn{attribute specifier} is of the form | |
2492 | @code{__attribute__ ((@var{attribute-list}))}. An @dfn{attribute list} | |
2493 | is a possibly empty comma-separated sequence of @dfn{attributes}, where | |
2494 | each attribute is one of the following: | |
2495 | ||
2496 | @itemize @bullet | |
2497 | @item | |
2498 | Empty. Empty attributes are ignored. | |
2499 | ||
2500 | @item | |
2501 | A word (which may be an identifier such as @code{unused}, or a reserved | |
2502 | word such as @code{const}). | |
2503 | ||
2504 | @item | |
2505 | A word, followed by, in parentheses, parameters for the attribute. | |
2506 | These parameters take one of the following forms: | |
2507 | ||
2508 | @itemize @bullet | |
2509 | @item | |
2510 | An identifier. For example, @code{mode} attributes use this form. | |
2511 | ||
2512 | @item | |
2513 | An identifier followed by a comma and a non-empty comma-separated list | |
2514 | of expressions. For example, @code{format} attributes use this form. | |
2515 | ||
2516 | @item | |
2517 | A possibly empty comma-separated list of expressions. For example, | |
2518 | @code{format_arg} attributes use this form with the list being a single | |
2519 | integer constant expression, and @code{alias} attributes use this form | |
2520 | with the list being a single string constant. | |
2521 | @end itemize | |
2522 | @end itemize | |
2523 | ||
2524 | An @dfn{attribute specifier list} is a sequence of one or more attribute | |
2525 | specifiers, not separated by any other tokens. | |
2526 | ||
2527 | An attribute specifier list may appear after the colon following a | |
2528 | label, other than a @code{case} or @code{default} label. The only | |
2529 | attribute it makes sense to use after a label is @code{unused}. This | |
2530 | feature is intended for code generated by programs which contains labels | |
2531 | that may be unused but which is compiled with @option{-Wall}. It would | |
2532 | not normally be appropriate to use in it human-written code, though it | |
2533 | could be useful in cases where the code that jumps to the label is | |
2534 | contained within an @code{#ifdef} conditional. | |
2535 | ||
2536 | An attribute specifier list may appear as part of a @code{struct}, | |
2537 | @code{union} or @code{enum} specifier. It may go either immediately | |
2538 | after the @code{struct}, @code{union} or @code{enum} keyword, or after | |
2539 | the closing brace. It is ignored if the content of the structure, union | |
2540 | or enumerated type is not defined in the specifier in which the | |
2541 | attribute specifier list is used---that is, in usages such as | |
2542 | @code{struct __attribute__((foo)) bar} with no following opening brace. | |
2543 | Where attribute specifiers follow the closing brace, they are considered | |
2544 | to relate to the structure, union or enumerated type defined, not to any | |
2545 | enclosing declaration the type specifier appears in, and the type | |
2546 | defined is not complete until after the attribute specifiers. | |
2547 | @c Otherwise, there would be the following problems: a shift/reduce | |
4fe9b91c | 2548 | @c conflict between attributes binding the struct/union/enum and |
2c5e91d2 JM |
2549 | @c binding to the list of specifiers/qualifiers; and "aligned" |
2550 | @c attributes could use sizeof for the structure, but the size could be | |
2551 | @c changed later by "packed" attributes. | |
2552 | ||
2553 | Otherwise, an attribute specifier appears as part of a declaration, | |
2554 | counting declarations of unnamed parameters and type names, and relates | |
2555 | to that declaration (which may be nested in another declaration, for | |
91d231cb JM |
2556 | example in the case of a parameter declaration), or to a particular declarator |
2557 | within a declaration. Where an | |
ff867905 JM |
2558 | attribute specifier is applied to a parameter declared as a function or |
2559 | an array, it should apply to the function or array rather than the | |
2560 | pointer to which the parameter is implicitly converted, but this is not | |
2561 | yet correctly implemented. | |
2c5e91d2 JM |
2562 | |
2563 | Any list of specifiers and qualifiers at the start of a declaration may | |
2564 | contain attribute specifiers, whether or not such a list may in that | |
2565 | context contain storage class specifiers. (Some attributes, however, | |
2566 | are essentially in the nature of storage class specifiers, and only make | |
2567 | sense where storage class specifiers may be used; for example, | |
2568 | @code{section}.) There is one necessary limitation to this syntax: the | |
2569 | first old-style parameter declaration in a function definition cannot | |
2570 | begin with an attribute specifier, because such an attribute applies to | |
2571 | the function instead by syntax described below (which, however, is not | |
2572 | yet implemented in this case). In some other cases, attribute | |
2573 | specifiers are permitted by this grammar but not yet supported by the | |
2574 | compiler. All attribute specifiers in this place relate to the | |
c771326b | 2575 | declaration as a whole. In the obsolescent usage where a type of |
2c5e91d2 JM |
2576 | @code{int} is implied by the absence of type specifiers, such a list of |
2577 | specifiers and qualifiers may be an attribute specifier list with no | |
2578 | other specifiers or qualifiers. | |
2579 | ||
2580 | An attribute specifier list may appear immediately before a declarator | |
2581 | (other than the first) in a comma-separated list of declarators in a | |
2582 | declaration of more than one identifier using a single list of | |
4b01f8d8 | 2583 | specifiers and qualifiers. Such attribute specifiers apply |
9c34dbbf ZW |
2584 | only to the identifier before whose declarator they appear. For |
2585 | example, in | |
2586 | ||
2587 | @smallexample | |
2588 | __attribute__((noreturn)) void d0 (void), | |
2589 | __attribute__((format(printf, 1, 2))) d1 (const char *, ...), | |
2590 | d2 (void) | |
2591 | @end smallexample | |
2592 | ||
2593 | @noindent | |
2594 | the @code{noreturn} attribute applies to all the functions | |
4b01f8d8 | 2595 | declared; the @code{format} attribute only applies to @code{d1}. |
2c5e91d2 JM |
2596 | |
2597 | An attribute specifier list may appear immediately before the comma, | |
2598 | @code{=} or semicolon terminating the declaration of an identifier other | |
2599 | than a function definition. At present, such attribute specifiers apply | |
2600 | to the declared object or function, but in future they may attach to the | |
2601 | outermost adjacent declarator. In simple cases there is no difference, | |
f282ffb3 | 2602 | but, for example, in |
9c34dbbf ZW |
2603 | |
2604 | @smallexample | |
2605 | void (****f)(void) __attribute__((noreturn)); | |
2606 | @end smallexample | |
2607 | ||
2608 | @noindent | |
2609 | at present the @code{noreturn} attribute applies to @code{f}, which | |
2610 | causes a warning since @code{f} is not a function, but in future it may | |
2611 | apply to the function @code{****f}. The precise semantics of what | |
2612 | attributes in such cases will apply to are not yet specified. Where an | |
2613 | assembler name for an object or function is specified (@pxref{Asm | |
2614 | Labels}), at present the attribute must follow the @code{asm} | |
2615 | specification; in future, attributes before the @code{asm} specification | |
2616 | may apply to the adjacent declarator, and those after it to the declared | |
2617 | object or function. | |
2c5e91d2 JM |
2618 | |
2619 | An attribute specifier list may, in future, be permitted to appear after | |
2620 | the declarator in a function definition (before any old-style parameter | |
2621 | declarations or the function body). | |
2622 | ||
0e03329a JM |
2623 | Attribute specifiers may be mixed with type qualifiers appearing inside |
2624 | the @code{[]} of a parameter array declarator, in the C99 construct by | |
2625 | which such qualifiers are applied to the pointer to which the array is | |
2626 | implicitly converted. Such attribute specifiers apply to the pointer, | |
2627 | not to the array, but at present this is not implemented and they are | |
2628 | ignored. | |
2629 | ||
2c5e91d2 JM |
2630 | An attribute specifier list may appear at the start of a nested |
2631 | declarator. At present, there are some limitations in this usage: the | |
91d231cb JM |
2632 | attributes correctly apply to the declarator, but for most individual |
2633 | attributes the semantics this implies are not implemented. | |
2634 | When attribute specifiers follow the @code{*} of a pointer | |
4b01f8d8 | 2635 | declarator, they may be mixed with any type qualifiers present. |
91d231cb | 2636 | The following describes the formal semantics of this syntax. It will make the |
2c5e91d2 JM |
2637 | most sense if you are familiar with the formal specification of |
2638 | declarators in the ISO C standard. | |
2639 | ||
2640 | Consider (as in C99 subclause 6.7.5 paragraph 4) a declaration @code{T | |
2641 | D1}, where @code{T} contains declaration specifiers that specify a type | |
2642 | @var{Type} (such as @code{int}) and @code{D1} is a declarator that | |
2643 | contains an identifier @var{ident}. The type specified for @var{ident} | |
2644 | for derived declarators whose type does not include an attribute | |
2645 | specifier is as in the ISO C standard. | |
2646 | ||
2647 | If @code{D1} has the form @code{( @var{attribute-specifier-list} D )}, | |
2648 | and the declaration @code{T D} specifies the type | |
2649 | ``@var{derived-declarator-type-list} @var{Type}'' for @var{ident}, then | |
2650 | @code{T D1} specifies the type ``@var{derived-declarator-type-list} | |
2651 | @var{attribute-specifier-list} @var{Type}'' for @var{ident}. | |
2652 | ||
2653 | If @code{D1} has the form @code{* | |
2654 | @var{type-qualifier-and-attribute-specifier-list} D}, and the | |
2655 | declaration @code{T D} specifies the type | |
2656 | ``@var{derived-declarator-type-list} @var{Type}'' for @var{ident}, then | |
2657 | @code{T D1} specifies the type ``@var{derived-declarator-type-list} | |
2658 | @var{type-qualifier-and-attribute-specifier-list} @var{Type}'' for | |
2659 | @var{ident}. | |
2660 | ||
f282ffb3 | 2661 | For example, |
9c34dbbf ZW |
2662 | |
2663 | @smallexample | |
2664 | void (__attribute__((noreturn)) ****f) (void); | |
2665 | @end smallexample | |
2666 | ||
2667 | @noindent | |
2668 | specifies the type ``pointer to pointer to pointer to pointer to | |
2669 | non-returning function returning @code{void}''. As another example, | |
2670 | ||
2671 | @smallexample | |
2672 | char *__attribute__((aligned(8))) *f; | |
2673 | @end smallexample | |
2674 | ||
2675 | @noindent | |
2676 | specifies the type ``pointer to 8-byte-aligned pointer to @code{char}''. | |
91d231cb JM |
2677 | Note again that this does not work with most attributes; for example, |
2678 | the usage of @samp{aligned} and @samp{noreturn} attributes given above | |
2679 | is not yet supported. | |
2680 | ||
2681 | For compatibility with existing code written for compiler versions that | |
2682 | did not implement attributes on nested declarators, some laxity is | |
2683 | allowed in the placing of attributes. If an attribute that only applies | |
2684 | to types is applied to a declaration, it will be treated as applying to | |
2685 | the type of that declaration. If an attribute that only applies to | |
2686 | declarations is applied to the type of a declaration, it will be treated | |
2687 | as applying to that declaration; and, for compatibility with code | |
2688 | placing the attributes immediately before the identifier declared, such | |
2689 | an attribute applied to a function return type will be treated as | |
2690 | applying to the function type, and such an attribute applied to an array | |
2691 | element type will be treated as applying to the array type. If an | |
2692 | attribute that only applies to function types is applied to a | |
2693 | pointer-to-function type, it will be treated as applying to the pointer | |
2694 | target type; if such an attribute is applied to a function return type | |
2695 | that is not a pointer-to-function type, it will be treated as applying | |
2696 | to the function type. | |
2c5e91d2 | 2697 | |
c1f7febf RK |
2698 | @node Function Prototypes |
2699 | @section Prototypes and Old-Style Function Definitions | |
2700 | @cindex function prototype declarations | |
2701 | @cindex old-style function definitions | |
2702 | @cindex promotion of formal parameters | |
2703 | ||
5490d604 | 2704 | GNU C extends ISO C to allow a function prototype to override a later |
c1f7febf RK |
2705 | old-style non-prototype definition. Consider the following example: |
2706 | ||
2707 | @example | |
2708 | /* @r{Use prototypes unless the compiler is old-fashioned.} */ | |
d863830b | 2709 | #ifdef __STDC__ |
c1f7febf RK |
2710 | #define P(x) x |
2711 | #else | |
2712 | #define P(x) () | |
2713 | #endif | |
2714 | ||
2715 | /* @r{Prototype function declaration.} */ | |
2716 | int isroot P((uid_t)); | |
2717 | ||
2718 | /* @r{Old-style function definition.} */ | |
2719 | int | |
2720 | isroot (x) /* ??? lossage here ??? */ | |
2721 | uid_t x; | |
2722 | @{ | |
2723 | return x == 0; | |
2724 | @} | |
2725 | @end example | |
2726 | ||
5490d604 | 2727 | Suppose the type @code{uid_t} happens to be @code{short}. ISO C does |
c1f7febf RK |
2728 | not allow this example, because subword arguments in old-style |
2729 | non-prototype definitions are promoted. Therefore in this example the | |
2730 | function definition's argument is really an @code{int}, which does not | |
2731 | match the prototype argument type of @code{short}. | |
2732 | ||
5490d604 | 2733 | This restriction of ISO C makes it hard to write code that is portable |
c1f7febf RK |
2734 | to traditional C compilers, because the programmer does not know |
2735 | whether the @code{uid_t} type is @code{short}, @code{int}, or | |
2736 | @code{long}. Therefore, in cases like these GNU C allows a prototype | |
2737 | to override a later old-style definition. More precisely, in GNU C, a | |
2738 | function prototype argument type overrides the argument type specified | |
2739 | by a later old-style definition if the former type is the same as the | |
2740 | latter type before promotion. Thus in GNU C the above example is | |
2741 | equivalent to the following: | |
2742 | ||
2743 | @example | |
2744 | int isroot (uid_t); | |
2745 | ||
2746 | int | |
2747 | isroot (uid_t x) | |
2748 | @{ | |
2749 | return x == 0; | |
2750 | @} | |
2751 | @end example | |
2752 | ||
9c34dbbf | 2753 | @noindent |
c1f7febf RK |
2754 | GNU C++ does not support old-style function definitions, so this |
2755 | extension is irrelevant. | |
2756 | ||
2757 | @node C++ Comments | |
2758 | @section C++ Style Comments | |
2759 | @cindex // | |
2760 | @cindex C++ comments | |
2761 | @cindex comments, C++ style | |
2762 | ||
2763 | In GNU C, you may use C++ style comments, which start with @samp{//} and | |
2764 | continue until the end of the line. Many other C implementations allow | |
f458d1d5 ZW |
2765 | such comments, and they are included in the 1999 C standard. However, |
2766 | C++ style comments are not recognized if you specify an @option{-std} | |
2767 | option specifying a version of ISO C before C99, or @option{-ansi} | |
2768 | (equivalent to @option{-std=c89}). | |
c1f7febf RK |
2769 | |
2770 | @node Dollar Signs | |
2771 | @section Dollar Signs in Identifier Names | |
2772 | @cindex $ | |
2773 | @cindex dollar signs in identifier names | |
2774 | @cindex identifier names, dollar signs in | |
2775 | ||
79188db9 RK |
2776 | In GNU C, you may normally use dollar signs in identifier names. |
2777 | This is because many traditional C implementations allow such identifiers. | |
2778 | However, dollar signs in identifiers are not supported on a few target | |
2779 | machines, typically because the target assembler does not allow them. | |
c1f7febf RK |
2780 | |
2781 | @node Character Escapes | |
2782 | @section The Character @key{ESC} in Constants | |
2783 | ||
2784 | You can use the sequence @samp{\e} in a string or character constant to | |
2785 | stand for the ASCII character @key{ESC}. | |
2786 | ||
2787 | @node Alignment | |
2788 | @section Inquiring on Alignment of Types or Variables | |
2789 | @cindex alignment | |
2790 | @cindex type alignment | |
2791 | @cindex variable alignment | |
2792 | ||
2793 | The keyword @code{__alignof__} allows you to inquire about how an object | |
2794 | is aligned, or the minimum alignment usually required by a type. Its | |
2795 | syntax is just like @code{sizeof}. | |
2796 | ||
2797 | For example, if the target machine requires a @code{double} value to be | |
2798 | aligned on an 8-byte boundary, then @code{__alignof__ (double)} is 8. | |
2799 | This is true on many RISC machines. On more traditional machine | |
2800 | designs, @code{__alignof__ (double)} is 4 or even 2. | |
2801 | ||
2802 | Some machines never actually require alignment; they allow reference to any | |
2803 | data type even at an odd addresses. For these machines, @code{__alignof__} | |
2804 | reports the @emph{recommended} alignment of a type. | |
2805 | ||
5372b3fb NB |
2806 | If the operand of @code{__alignof__} is an lvalue rather than a type, |
2807 | its value is the required alignment for its type, taking into account | |
2808 | any minimum alignment specified with GCC's @code{__attribute__} | |
2809 | extension (@pxref{Variable Attributes}). For example, after this | |
2810 | declaration: | |
c1f7febf RK |
2811 | |
2812 | @example | |
2813 | struct foo @{ int x; char y; @} foo1; | |
2814 | @end example | |
2815 | ||
2816 | @noindent | |
5372b3fb NB |
2817 | the value of @code{__alignof__ (foo1.y)} is 1, even though its actual |
2818 | alignment is probably 2 or 4, the same as @code{__alignof__ (int)}. | |
c1f7febf | 2819 | |
9d27bffe SS |
2820 | It is an error to ask for the alignment of an incomplete type. |
2821 | ||
c1f7febf RK |
2822 | @node Variable Attributes |
2823 | @section Specifying Attributes of Variables | |
2824 | @cindex attribute of variables | |
2825 | @cindex variable attributes | |
2826 | ||
2827 | The keyword @code{__attribute__} allows you to specify special | |
2828 | attributes of variables or structure fields. This keyword is followed | |
e23bd218 | 2829 | by an attribute specification inside double parentheses. Ten |
c1f7febf RK |
2830 | attributes are currently defined for variables: @code{aligned}, |
2831 | @code{mode}, @code{nocommon}, @code{packed}, @code{section}, | |
e23bd218 IR |
2832 | @code{transparent_union}, @code{unused}, @code{deprecated}, |
2833 | @code{vector_size}, and @code{weak}. Some other attributes are defined | |
2834 | for variables on particular target systems. Other attributes are | |
2835 | available for functions (@pxref{Function Attributes}) and for types | |
2836 | (@pxref{Type Attributes}). Other front ends might define more | |
2837 | attributes (@pxref{C++ Extensions,,Extensions to the C++ Language}). | |
c1f7febf RK |
2838 | |
2839 | You may also specify attributes with @samp{__} preceding and following | |
2840 | each keyword. This allows you to use them in header files without | |
2841 | being concerned about a possible macro of the same name. For example, | |
2842 | you may use @code{__aligned__} instead of @code{aligned}. | |
2843 | ||
2c5e91d2 JM |
2844 | @xref{Attribute Syntax}, for details of the exact syntax for using |
2845 | attributes. | |
2846 | ||
c1f7febf RK |
2847 | @table @code |
2848 | @cindex @code{aligned} attribute | |
2849 | @item aligned (@var{alignment}) | |
2850 | This attribute specifies a minimum alignment for the variable or | |
2851 | structure field, measured in bytes. For example, the declaration: | |
2852 | ||
2853 | @smallexample | |
2854 | int x __attribute__ ((aligned (16))) = 0; | |
2855 | @end smallexample | |
2856 | ||
2857 | @noindent | |
2858 | causes the compiler to allocate the global variable @code{x} on a | |
2859 | 16-byte boundary. On a 68040, this could be used in conjunction with | |
2860 | an @code{asm} expression to access the @code{move16} instruction which | |
2861 | requires 16-byte aligned operands. | |
2862 | ||
2863 | You can also specify the alignment of structure fields. For example, to | |
2864 | create a double-word aligned @code{int} pair, you could write: | |
2865 | ||
2866 | @smallexample | |
2867 | struct foo @{ int x[2] __attribute__ ((aligned (8))); @}; | |
2868 | @end smallexample | |
2869 | ||
2870 | @noindent | |
2871 | This is an alternative to creating a union with a @code{double} member | |
2872 | that forces the union to be double-word aligned. | |
2873 | ||
c1f7febf RK |
2874 | As in the preceding examples, you can explicitly specify the alignment |
2875 | (in bytes) that you wish the compiler to use for a given variable or | |
2876 | structure field. Alternatively, you can leave out the alignment factor | |
2877 | and just ask the compiler to align a variable or field to the maximum | |
2878 | useful alignment for the target machine you are compiling for. For | |
2879 | example, you could write: | |
2880 | ||
2881 | @smallexample | |
2882 | short array[3] __attribute__ ((aligned)); | |
2883 | @end smallexample | |
2884 | ||
2885 | Whenever you leave out the alignment factor in an @code{aligned} attribute | |
2886 | specification, the compiler automatically sets the alignment for the declared | |
2887 | variable or field to the largest alignment which is ever used for any data | |
2888 | type on the target machine you are compiling for. Doing this can often make | |
2889 | copy operations more efficient, because the compiler can use whatever | |
2890 | instructions copy the biggest chunks of memory when performing copies to | |
2891 | or from the variables or fields that you have aligned this way. | |
2892 | ||
2893 | The @code{aligned} attribute can only increase the alignment; but you | |
2894 | can decrease it by specifying @code{packed} as well. See below. | |
2895 | ||
2896 | Note that the effectiveness of @code{aligned} attributes may be limited | |
2897 | by inherent limitations in your linker. On many systems, the linker is | |
2898 | only able to arrange for variables to be aligned up to a certain maximum | |
2899 | alignment. (For some linkers, the maximum supported alignment may | |
2900 | be very very small.) If your linker is only able to align variables | |
2901 | up to a maximum of 8 byte alignment, then specifying @code{aligned(16)} | |
2902 | in an @code{__attribute__} will still only provide you with 8 byte | |
2903 | alignment. See your linker documentation for further information. | |
2904 | ||
2905 | @item mode (@var{mode}) | |
2906 | @cindex @code{mode} attribute | |
2907 | This attribute specifies the data type for the declaration---whichever | |
2908 | type corresponds to the mode @var{mode}. This in effect lets you | |
2909 | request an integer or floating point type according to its width. | |
2910 | ||
2911 | You may also specify a mode of @samp{byte} or @samp{__byte__} to | |
2912 | indicate the mode corresponding to a one-byte integer, @samp{word} or | |
2913 | @samp{__word__} for the mode of a one-word integer, and @samp{pointer} | |
2914 | or @samp{__pointer__} for the mode used to represent pointers. | |
2915 | ||
2916 | @item nocommon | |
2917 | @cindex @code{nocommon} attribute | |
84330467 | 2918 | @opindex fno-common |
f0523f02 | 2919 | This attribute specifies requests GCC not to place a variable |
c1f7febf | 2920 | ``common'' but instead to allocate space for it directly. If you |
f0523f02 | 2921 | specify the @option{-fno-common} flag, GCC will do this for all |
c1f7febf RK |
2922 | variables. |
2923 | ||
2924 | Specifying the @code{nocommon} attribute for a variable provides an | |
2925 | initialization of zeros. A variable may only be initialized in one | |
2926 | source file. | |
2927 | ||
2928 | @item packed | |
2929 | @cindex @code{packed} attribute | |
2930 | The @code{packed} attribute specifies that a variable or structure field | |
2931 | should have the smallest possible alignment---one byte for a variable, | |
2932 | and one bit for a field, unless you specify a larger value with the | |
2933 | @code{aligned} attribute. | |
2934 | ||
2935 | Here is a structure in which the field @code{x} is packed, so that it | |
2936 | immediately follows @code{a}: | |
2937 | ||
2938 | @example | |
2939 | struct foo | |
2940 | @{ | |
2941 | char a; | |
2942 | int x[2] __attribute__ ((packed)); | |
2943 | @}; | |
2944 | @end example | |
2945 | ||
84330467 | 2946 | @item section ("@var{section-name}") |
c1f7febf RK |
2947 | @cindex @code{section} variable attribute |
2948 | Normally, the compiler places the objects it generates in sections like | |
2949 | @code{data} and @code{bss}. Sometimes, however, you need additional sections, | |
2950 | or you need certain particular variables to appear in special sections, | |
2951 | for example to map to special hardware. The @code{section} | |
2952 | attribute specifies that a variable (or function) lives in a particular | |
2953 | section. For example, this small program uses several specific section names: | |
2954 | ||
2955 | @smallexample | |
2956 | struct duart a __attribute__ ((section ("DUART_A"))) = @{ 0 @}; | |
2957 | struct duart b __attribute__ ((section ("DUART_B"))) = @{ 0 @}; | |
2958 | char stack[10000] __attribute__ ((section ("STACK"))) = @{ 0 @}; | |
2959 | int init_data __attribute__ ((section ("INITDATA"))) = 0; | |
2960 | ||
2961 | main() | |
2962 | @{ | |
2963 | /* Initialize stack pointer */ | |
2964 | init_sp (stack + sizeof (stack)); | |
2965 | ||
2966 | /* Initialize initialized data */ | |
2967 | memcpy (&init_data, &data, &edata - &data); | |
2968 | ||
2969 | /* Turn on the serial ports */ | |
2970 | init_duart (&a); | |
2971 | init_duart (&b); | |
2972 | @} | |
2973 | @end smallexample | |
2974 | ||
2975 | @noindent | |
2976 | Use the @code{section} attribute with an @emph{initialized} definition | |
f0523f02 | 2977 | of a @emph{global} variable, as shown in the example. GCC issues |
c1f7febf RK |
2978 | a warning and otherwise ignores the @code{section} attribute in |
2979 | uninitialized variable declarations. | |
2980 | ||
2981 | You may only use the @code{section} attribute with a fully initialized | |
2982 | global definition because of the way linkers work. The linker requires | |
2983 | each object be defined once, with the exception that uninitialized | |
2984 | variables tentatively go in the @code{common} (or @code{bss}) section | |
84330467 JM |
2985 | and can be multiply ``defined''. You can force a variable to be |
2986 | initialized with the @option{-fno-common} flag or the @code{nocommon} | |
c1f7febf RK |
2987 | attribute. |
2988 | ||
2989 | Some file formats do not support arbitrary sections so the @code{section} | |
2990 | attribute is not available on all platforms. | |
2991 | If you need to map the entire contents of a module to a particular | |
2992 | section, consider using the facilities of the linker instead. | |
2993 | ||
593d3a34 MK |
2994 | @item shared |
2995 | @cindex @code{shared} variable attribute | |
02f52e19 AJ |
2996 | On Windows NT, in addition to putting variable definitions in a named |
2997 | section, the section can also be shared among all running copies of an | |
161d7b59 | 2998 | executable or DLL@. For example, this small program defines shared data |
84330467 | 2999 | by putting it in a named section @code{shared} and marking the section |
593d3a34 MK |
3000 | shareable: |
3001 | ||
3002 | @smallexample | |
3003 | int foo __attribute__((section ("shared"), shared)) = 0; | |
3004 | ||
3005 | int | |
3006 | main() | |
3007 | @{ | |
310668e8 JM |
3008 | /* Read and write foo. All running |
3009 | copies see the same value. */ | |
593d3a34 MK |
3010 | return 0; |
3011 | @} | |
3012 | @end smallexample | |
3013 | ||
3014 | @noindent | |
3015 | You may only use the @code{shared} attribute along with @code{section} | |
02f52e19 | 3016 | attribute with a fully initialized global definition because of the way |
593d3a34 MK |
3017 | linkers work. See @code{section} attribute for more information. |
3018 | ||
161d7b59 | 3019 | The @code{shared} attribute is only available on Windows NT@. |
593d3a34 | 3020 | |
c1f7febf RK |
3021 | @item transparent_union |
3022 | This attribute, attached to a function parameter which is a union, means | |
3023 | that the corresponding argument may have the type of any union member, | |
3024 | but the argument is passed as if its type were that of the first union | |
3025 | member. For more details see @xref{Type Attributes}. You can also use | |
3026 | this attribute on a @code{typedef} for a union data type; then it | |
3027 | applies to all function parameters with that type. | |
3028 | ||
3029 | @item unused | |
3030 | This attribute, attached to a variable, means that the variable is meant | |
f0523f02 | 3031 | to be possibly unused. GCC will not produce a warning for this |
c1f7febf RK |
3032 | variable. |
3033 | ||
e23bd218 IR |
3034 | @item deprecated |
3035 | The @code{deprecated} attribute results in a warning if the variable | |
3036 | is used anywhere in the source file. This is useful when identifying | |
3037 | variables that are expected to be removed in a future version of a | |
3038 | program. The warning also includes the location of the declaration | |
3039 | of the deprecated variable, to enable users to easily find further | |
3040 | information about why the variable is deprecated, or what they should | |
3041 | do instead. Note that the warnings only occurs for uses: | |
3042 | ||
3043 | @smallexample | |
3044 | extern int old_var __attribute__ ((deprecated)); | |
3045 | extern int old_var; | |
3046 | int new_fn () @{ return old_var; @} | |
3047 | @end smallexample | |
3048 | ||
3049 | results in a warning on line 3 but not line 2. | |
3050 | ||
3051 | The @code{deprecated} attribute can also be used for functions and | |
3052 | types (@pxref{Function Attributes}, @pxref{Type Attributes}.) | |
3053 | ||
1b9191d2 AH |
3054 | @item vector_size (@var{bytes}) |
3055 | This attribute specifies the vector size for the variable, measured in | |
3056 | bytes. For example, the declaration: | |
3057 | ||
3058 | @smallexample | |
3059 | int foo __attribute__ ((vector_size (16))); | |
3060 | @end smallexample | |
3061 | ||
3062 | @noindent | |
3063 | causes the compiler to set the mode for @code{foo}, to be 16 bytes, | |
3064 | divided into @code{int} sized units. Assuming a 32-bit int (a vector of | |
3065 | 4 units of 4 bytes), the corresponding mode of @code{foo} will be V4SI@. | |
3066 | ||
3067 | This attribute is only applicable to integral and float scalars, | |
3068 | although arrays, pointers, and function return values are allowed in | |
3069 | conjunction with this construct. | |
3070 | ||
3071 | Aggregates with this attribute are invalid, even if they are of the same | |
3072 | size as a corresponding scalar. For example, the declaration: | |
3073 | ||
3074 | @smallexample | |
ad706f54 | 3075 | struct S @{ int a; @}; |
1b9191d2 AH |
3076 | struct S __attribute__ ((vector_size (16))) foo; |
3077 | @end smallexample | |
3078 | ||
3079 | @noindent | |
3080 | is invalid even if the size of the structure is the same as the size of | |
3081 | the @code{int}. | |
3082 | ||
c1f7febf RK |
3083 | @item weak |
3084 | The @code{weak} attribute is described in @xref{Function Attributes}. | |
845da534 DE |
3085 | |
3086 | @item model (@var{model-name}) | |
3087 | @cindex variable addressability on the M32R/D | |
3088 | Use this attribute on the M32R/D to set the addressability of an object. | |
3089 | The identifier @var{model-name} is one of @code{small}, @code{medium}, | |
3090 | or @code{large}, representing each of the code models. | |
3091 | ||
3092 | Small model objects live in the lower 16MB of memory (so that their | |
3093 | addresses can be loaded with the @code{ld24} instruction). | |
3094 | ||
02f52e19 | 3095 | Medium and large model objects may live anywhere in the 32-bit address space |
845da534 DE |
3096 | (the compiler will generate @code{seth/add3} instructions to load their |
3097 | addresses). | |
3098 | ||
c1f7febf RK |
3099 | @end table |
3100 | ||
3101 | To specify multiple attributes, separate them by commas within the | |
3102 | double parentheses: for example, @samp{__attribute__ ((aligned (16), | |
3103 | packed))}. | |
3104 | ||
3105 | @node Type Attributes | |
3106 | @section Specifying Attributes of Types | |
3107 | @cindex attribute of types | |
3108 | @cindex type attributes | |
3109 | ||
3110 | The keyword @code{__attribute__} allows you to specify special | |
3111 | attributes of @code{struct} and @code{union} types when you define such | |
3112 | types. This keyword is followed by an attribute specification inside | |
e23bd218 IR |
3113 | double parentheses. Five attributes are currently defined for types: |
3114 | @code{aligned}, @code{packed}, @code{transparent_union}, @code{unused}, | |
3115 | and @code{deprecated}. Other attributes are defined for functions | |
3116 | (@pxref{Function Attributes}) and for variables (@pxref{Variable Attributes}). | |
c1f7febf RK |
3117 | |
3118 | You may also specify any one of these attributes with @samp{__} | |
3119 | preceding and following its keyword. This allows you to use these | |
3120 | attributes in header files without being concerned about a possible | |
3121 | macro of the same name. For example, you may use @code{__aligned__} | |
3122 | instead of @code{aligned}. | |
3123 | ||
3124 | You may specify the @code{aligned} and @code{transparent_union} | |
3125 | attributes either in a @code{typedef} declaration or just past the | |
3126 | closing curly brace of a complete enum, struct or union type | |
3127 | @emph{definition} and the @code{packed} attribute only past the closing | |
3128 | brace of a definition. | |
3129 | ||
4051959b JM |
3130 | You may also specify attributes between the enum, struct or union |
3131 | tag and the name of the type rather than after the closing brace. | |
3132 | ||
2c5e91d2 JM |
3133 | @xref{Attribute Syntax}, for details of the exact syntax for using |
3134 | attributes. | |
3135 | ||
c1f7febf RK |
3136 | @table @code |
3137 | @cindex @code{aligned} attribute | |
3138 | @item aligned (@var{alignment}) | |
3139 | This attribute specifies a minimum alignment (in bytes) for variables | |
3140 | of the specified type. For example, the declarations: | |
3141 | ||
3142 | @smallexample | |
f69eecfb JL |
3143 | struct S @{ short f[3]; @} __attribute__ ((aligned (8))); |
3144 | typedef int more_aligned_int __attribute__ ((aligned (8))); | |
c1f7febf RK |
3145 | @end smallexample |
3146 | ||
3147 | @noindent | |
d863830b | 3148 | force the compiler to insure (as far as it can) that each variable whose |
c1f7febf RK |
3149 | type is @code{struct S} or @code{more_aligned_int} will be allocated and |
3150 | aligned @emph{at least} on a 8-byte boundary. On a Sparc, having all | |
3151 | variables of type @code{struct S} aligned to 8-byte boundaries allows | |
3152 | the compiler to use the @code{ldd} and @code{std} (doubleword load and | |
3153 | store) instructions when copying one variable of type @code{struct S} to | |
3154 | another, thus improving run-time efficiency. | |
3155 | ||
3156 | Note that the alignment of any given @code{struct} or @code{union} type | |
5490d604 | 3157 | is required by the ISO C standard to be at least a perfect multiple of |
c1f7febf RK |
3158 | the lowest common multiple of the alignments of all of the members of |
3159 | the @code{struct} or @code{union} in question. This means that you @emph{can} | |
3160 | effectively adjust the alignment of a @code{struct} or @code{union} | |
3161 | type by attaching an @code{aligned} attribute to any one of the members | |
3162 | of such a type, but the notation illustrated in the example above is a | |
3163 | more obvious, intuitive, and readable way to request the compiler to | |
3164 | adjust the alignment of an entire @code{struct} or @code{union} type. | |
3165 | ||
3166 | As in the preceding example, you can explicitly specify the alignment | |
3167 | (in bytes) that you wish the compiler to use for a given @code{struct} | |
3168 | or @code{union} type. Alternatively, you can leave out the alignment factor | |
3169 | and just ask the compiler to align a type to the maximum | |
3170 | useful alignment for the target machine you are compiling for. For | |
3171 | example, you could write: | |
3172 | ||
3173 | @smallexample | |
3174 | struct S @{ short f[3]; @} __attribute__ ((aligned)); | |
3175 | @end smallexample | |
3176 | ||
3177 | Whenever you leave out the alignment factor in an @code{aligned} | |
3178 | attribute specification, the compiler automatically sets the alignment | |
3179 | for the type to the largest alignment which is ever used for any data | |
3180 | type on the target machine you are compiling for. Doing this can often | |
3181 | make copy operations more efficient, because the compiler can use | |
3182 | whatever instructions copy the biggest chunks of memory when performing | |
3183 | copies to or from the variables which have types that you have aligned | |
3184 | this way. | |
3185 | ||
3186 | In the example above, if the size of each @code{short} is 2 bytes, then | |
3187 | the size of the entire @code{struct S} type is 6 bytes. The smallest | |
3188 | power of two which is greater than or equal to that is 8, so the | |
3189 | compiler sets the alignment for the entire @code{struct S} type to 8 | |
3190 | bytes. | |
3191 | ||
3192 | Note that although you can ask the compiler to select a time-efficient | |
3193 | alignment for a given type and then declare only individual stand-alone | |
3194 | objects of that type, the compiler's ability to select a time-efficient | |
3195 | alignment is primarily useful only when you plan to create arrays of | |
3196 | variables having the relevant (efficiently aligned) type. If you | |
3197 | declare or use arrays of variables of an efficiently-aligned type, then | |
3198 | it is likely that your program will also be doing pointer arithmetic (or | |
3199 | subscripting, which amounts to the same thing) on pointers to the | |
3200 | relevant type, and the code that the compiler generates for these | |
3201 | pointer arithmetic operations will often be more efficient for | |
3202 | efficiently-aligned types than for other types. | |
3203 | ||
3204 | The @code{aligned} attribute can only increase the alignment; but you | |
3205 | can decrease it by specifying @code{packed} as well. See below. | |
3206 | ||
3207 | Note that the effectiveness of @code{aligned} attributes may be limited | |
3208 | by inherent limitations in your linker. On many systems, the linker is | |
3209 | only able to arrange for variables to be aligned up to a certain maximum | |
3210 | alignment. (For some linkers, the maximum supported alignment may | |
3211 | be very very small.) If your linker is only able to align variables | |
3212 | up to a maximum of 8 byte alignment, then specifying @code{aligned(16)} | |
3213 | in an @code{__attribute__} will still only provide you with 8 byte | |
3214 | alignment. See your linker documentation for further information. | |
3215 | ||
3216 | @item packed | |
3217 | This attribute, attached to an @code{enum}, @code{struct}, or | |
3218 | @code{union} type definition, specified that the minimum required memory | |
3219 | be used to represent the type. | |
3220 | ||
84330467 | 3221 | @opindex fshort-enums |
c1f7febf RK |
3222 | Specifying this attribute for @code{struct} and @code{union} types is |
3223 | equivalent to specifying the @code{packed} attribute on each of the | |
84330467 | 3224 | structure or union members. Specifying the @option{-fshort-enums} |
c1f7febf RK |
3225 | flag on the line is equivalent to specifying the @code{packed} |
3226 | attribute on all @code{enum} definitions. | |
3227 | ||
3228 | You may only specify this attribute after a closing curly brace on an | |
1cd4bca9 BK |
3229 | @code{enum} definition, not in a @code{typedef} declaration, unless that |
3230 | declaration also contains the definition of the @code{enum}. | |
c1f7febf RK |
3231 | |
3232 | @item transparent_union | |
3233 | This attribute, attached to a @code{union} type definition, indicates | |
3234 | that any function parameter having that union type causes calls to that | |
3235 | function to be treated in a special way. | |
3236 | ||
3237 | First, the argument corresponding to a transparent union type can be of | |
3238 | any type in the union; no cast is required. Also, if the union contains | |
3239 | a pointer type, the corresponding argument can be a null pointer | |
3240 | constant or a void pointer expression; and if the union contains a void | |
3241 | pointer type, the corresponding argument can be any pointer expression. | |
3242 | If the union member type is a pointer, qualifiers like @code{const} on | |
3243 | the referenced type must be respected, just as with normal pointer | |
3244 | conversions. | |
3245 | ||
3246 | Second, the argument is passed to the function using the calling | |
3247 | conventions of first member of the transparent union, not the calling | |
3248 | conventions of the union itself. All members of the union must have the | |
3249 | same machine representation; this is necessary for this argument passing | |
3250 | to work properly. | |
3251 | ||
3252 | Transparent unions are designed for library functions that have multiple | |
3253 | interfaces for compatibility reasons. For example, suppose the | |
3254 | @code{wait} function must accept either a value of type @code{int *} to | |
3255 | comply with Posix, or a value of type @code{union wait *} to comply with | |
3256 | the 4.1BSD interface. If @code{wait}'s parameter were @code{void *}, | |
3257 | @code{wait} would accept both kinds of arguments, but it would also | |
3258 | accept any other pointer type and this would make argument type checking | |
3259 | less useful. Instead, @code{<sys/wait.h>} might define the interface | |
3260 | as follows: | |
3261 | ||
3262 | @smallexample | |
3263 | typedef union | |
3264 | @{ | |
3265 | int *__ip; | |
3266 | union wait *__up; | |
3267 | @} wait_status_ptr_t __attribute__ ((__transparent_union__)); | |
3268 | ||
3269 | pid_t wait (wait_status_ptr_t); | |
3270 | @end smallexample | |
3271 | ||
3272 | This interface allows either @code{int *} or @code{union wait *} | |
3273 | arguments to be passed, using the @code{int *} calling convention. | |
3274 | The program can call @code{wait} with arguments of either type: | |
3275 | ||
3276 | @example | |
3277 | int w1 () @{ int w; return wait (&w); @} | |
3278 | int w2 () @{ union wait w; return wait (&w); @} | |
3279 | @end example | |
3280 | ||
3281 | With this interface, @code{wait}'s implementation might look like this: | |
3282 | ||
3283 | @example | |
3284 | pid_t wait (wait_status_ptr_t p) | |
3285 | @{ | |
3286 | return waitpid (-1, p.__ip, 0); | |
3287 | @} | |
3288 | @end example | |
d863830b JL |
3289 | |
3290 | @item unused | |
3291 | When attached to a type (including a @code{union} or a @code{struct}), | |
3292 | this attribute means that variables of that type are meant to appear | |
f0523f02 | 3293 | possibly unused. GCC will not produce a warning for any variables of |
d863830b JL |
3294 | that type, even if the variable appears to do nothing. This is often |
3295 | the case with lock or thread classes, which are usually defined and then | |
3296 | not referenced, but contain constructors and destructors that have | |
956d6950 | 3297 | nontrivial bookkeeping functions. |
d863830b | 3298 | |
e23bd218 IR |
3299 | @item deprecated |
3300 | The @code{deprecated} attribute results in a warning if the type | |
3301 | is used anywhere in the source file. This is useful when identifying | |
3302 | types that are expected to be removed in a future version of a program. | |
3303 | If possible, the warning also includes the location of the declaration | |
3304 | of the deprecated type, to enable users to easily find further | |
3305 | information about why the type is deprecated, or what they should do | |
3306 | instead. Note that the warnings only occur for uses and then only | |
adc9fe67 | 3307 | if the type is being applied to an identifier that itself is not being |
e23bd218 IR |
3308 | declared as deprecated. |
3309 | ||
3310 | @smallexample | |
3311 | typedef int T1 __attribute__ ((deprecated)); | |
3312 | T1 x; | |
3313 | typedef T1 T2; | |
3314 | T2 y; | |
3315 | typedef T1 T3 __attribute__ ((deprecated)); | |
3316 | T3 z __attribute__ ((deprecated)); | |
3317 | @end smallexample | |
3318 | ||
3319 | results in a warning on line 2 and 3 but not lines 4, 5, or 6. No | |
3320 | warning is issued for line 4 because T2 is not explicitly | |
3321 | deprecated. Line 5 has no warning because T3 is explicitly | |
3322 | deprecated. Similarly for line 6. | |
3323 | ||
3324 | The @code{deprecated} attribute can also be used for functions and | |
3325 | variables (@pxref{Function Attributes}, @pxref{Variable Attributes}.) | |
3326 | ||
c1f7febf RK |
3327 | @end table |
3328 | ||
3329 | To specify multiple attributes, separate them by commas within the | |
3330 | double parentheses: for example, @samp{__attribute__ ((aligned (16), | |
3331 | packed))}. | |
3332 | ||
3333 | @node Inline | |
3334 | @section An Inline Function is As Fast As a Macro | |
3335 | @cindex inline functions | |
3336 | @cindex integrating function code | |
3337 | @cindex open coding | |
3338 | @cindex macros, inline alternative | |
3339 | ||
f0523f02 | 3340 | By declaring a function @code{inline}, you can direct GCC to |
c1f7febf RK |
3341 | integrate that function's code into the code for its callers. This |
3342 | makes execution faster by eliminating the function-call overhead; in | |
3343 | addition, if any of the actual argument values are constant, their known | |
3344 | values may permit simplifications at compile time so that not all of the | |
3345 | inline function's code needs to be included. The effect on code size is | |
3346 | less predictable; object code may be larger or smaller with function | |
3347 | inlining, depending on the particular case. Inlining of functions is an | |
3348 | optimization and it really ``works'' only in optimizing compilation. If | |
84330467 | 3349 | you don't use @option{-O}, no function is really inline. |
c1f7febf | 3350 | |
4b404517 JM |
3351 | Inline functions are included in the ISO C99 standard, but there are |
3352 | currently substantial differences between what GCC implements and what | |
3353 | the ISO C99 standard requires. | |
3354 | ||
c1f7febf RK |
3355 | To declare a function inline, use the @code{inline} keyword in its |
3356 | declaration, like this: | |
3357 | ||
3358 | @example | |
3359 | inline int | |
3360 | inc (int *a) | |
3361 | @{ | |
3362 | (*a)++; | |
3363 | @} | |
3364 | @end example | |
3365 | ||
5490d604 | 3366 | (If you are writing a header file to be included in ISO C programs, write |
c1f7febf | 3367 | @code{__inline__} instead of @code{inline}. @xref{Alternate Keywords}.) |
c1f7febf | 3368 | You can also make all ``simple enough'' functions inline with the option |
84330467 | 3369 | @option{-finline-functions}. |
247b14bd | 3370 | |
84330467 | 3371 | @opindex Winline |
247b14bd RH |
3372 | Note that certain usages in a function definition can make it unsuitable |
3373 | for inline substitution. Among these usages are: use of varargs, use of | |
3374 | alloca, use of variable sized data types (@pxref{Variable Length}), | |
3375 | use of computed goto (@pxref{Labels as Values}), use of nonlocal goto, | |
84330467 | 3376 | and nested functions (@pxref{Nested Functions}). Using @option{-Winline} |
247b14bd RH |
3377 | will warn when a function marked @code{inline} could not be substituted, |
3378 | and will give the reason for the failure. | |
c1f7febf | 3379 | |
2147b154 | 3380 | Note that in C and Objective-C, unlike C++, the @code{inline} keyword |
c1f7febf RK |
3381 | does not affect the linkage of the function. |
3382 | ||
3383 | @cindex automatic @code{inline} for C++ member fns | |
3384 | @cindex @code{inline} automatic for C++ member fns | |
3385 | @cindex member fns, automatically @code{inline} | |
3386 | @cindex C++ member fns, automatically @code{inline} | |
84330467 | 3387 | @opindex fno-default-inline |
f0523f02 | 3388 | GCC automatically inlines member functions defined within the class |
c1f7febf | 3389 | body of C++ programs even if they are not explicitly declared |
84330467 | 3390 | @code{inline}. (You can override this with @option{-fno-default-inline}; |
c1f7febf RK |
3391 | @pxref{C++ Dialect Options,,Options Controlling C++ Dialect}.) |
3392 | ||
3393 | @cindex inline functions, omission of | |
84330467 | 3394 | @opindex fkeep-inline-functions |
c1f7febf RK |
3395 | When a function is both inline and @code{static}, if all calls to the |
3396 | function are integrated into the caller, and the function's address is | |
3397 | never used, then the function's own assembler code is never referenced. | |
f0523f02 | 3398 | In this case, GCC does not actually output assembler code for the |
84330467 | 3399 | function, unless you specify the option @option{-fkeep-inline-functions}. |
c1f7febf RK |
3400 | Some calls cannot be integrated for various reasons (in particular, |
3401 | calls that precede the function's definition cannot be integrated, and | |
3402 | neither can recursive calls within the definition). If there is a | |
3403 | nonintegrated call, then the function is compiled to assembler code as | |
3404 | usual. The function must also be compiled as usual if the program | |
3405 | refers to its address, because that can't be inlined. | |
3406 | ||
3407 | @cindex non-static inline function | |
3408 | When an inline function is not @code{static}, then the compiler must assume | |
3409 | that there may be calls from other source files; since a global symbol can | |
3410 | be defined only once in any program, the function must not be defined in | |
3411 | the other source files, so the calls therein cannot be integrated. | |
3412 | Therefore, a non-@code{static} inline function is always compiled on its | |
3413 | own in the usual fashion. | |
3414 | ||
3415 | If you specify both @code{inline} and @code{extern} in the function | |
3416 | definition, then the definition is used only for inlining. In no case | |
3417 | is the function compiled on its own, not even if you refer to its | |
3418 | address explicitly. Such an address becomes an external reference, as | |
3419 | if you had only declared the function, and had not defined it. | |
3420 | ||
3421 | This combination of @code{inline} and @code{extern} has almost the | |
3422 | effect of a macro. The way to use it is to put a function definition in | |
3423 | a header file with these keywords, and put another copy of the | |
3424 | definition (lacking @code{inline} and @code{extern}) in a library file. | |
3425 | The definition in the header file will cause most calls to the function | |
3426 | to be inlined. If any uses of the function remain, they will refer to | |
3427 | the single copy in the library. | |
3428 | ||
4b404517 JM |
3429 | For future compatibility with when GCC implements ISO C99 semantics for |
3430 | inline functions, it is best to use @code{static inline} only. (The | |
3431 | existing semantics will remain available when @option{-std=gnu89} is | |
3432 | specified, but eventually the default will be @option{-std=gnu99} and | |
3433 | that will implement the C99 semantics, though it does not do so yet.) | |
3434 | ||
6aa77e6c AH |
3435 | GCC does not inline any functions when not optimizing unless you specify |
3436 | the @samp{always_inline} attribute for the function, like this: | |
3437 | ||
3438 | @example | |
3439 | /* Prototype. */ | |
3440 | inline void foo (const char) __attribute__((always_inline)); | |
3441 | @end example | |
c1f7febf RK |
3442 | |
3443 | @node Extended Asm | |
3444 | @section Assembler Instructions with C Expression Operands | |
3445 | @cindex extended @code{asm} | |
3446 | @cindex @code{asm} expressions | |
3447 | @cindex assembler instructions | |
3448 | @cindex registers | |
3449 | ||
c85f7c16 JL |
3450 | In an assembler instruction using @code{asm}, you can specify the |
3451 | operands of the instruction using C expressions. This means you need not | |
3452 | guess which registers or memory locations will contain the data you want | |
c1f7febf RK |
3453 | to use. |
3454 | ||
c85f7c16 JL |
3455 | You must specify an assembler instruction template much like what |
3456 | appears in a machine description, plus an operand constraint string for | |
3457 | each operand. | |
c1f7febf RK |
3458 | |
3459 | For example, here is how to use the 68881's @code{fsinx} instruction: | |
3460 | ||
3461 | @example | |
3462 | asm ("fsinx %1,%0" : "=f" (result) : "f" (angle)); | |
3463 | @end example | |
3464 | ||
3465 | @noindent | |
3466 | Here @code{angle} is the C expression for the input operand while | |
3467 | @code{result} is that of the output operand. Each has @samp{"f"} as its | |
c85f7c16 JL |
3468 | operand constraint, saying that a floating point register is required. |
3469 | The @samp{=} in @samp{=f} indicates that the operand is an output; all | |
3470 | output operands' constraints must use @samp{=}. The constraints use the | |
3471 | same language used in the machine description (@pxref{Constraints}). | |
3472 | ||
3473 | Each operand is described by an operand-constraint string followed by | |
3474 | the C expression in parentheses. A colon separates the assembler | |
3475 | template from the first output operand and another separates the last | |
3476 | output operand from the first input, if any. Commas separate the | |
84b72302 RH |
3477 | operands within each group. The total number of operands is currently |
3478 | limited to 30; this limitation may be lifted in some future version of | |
3479 | GCC. | |
c85f7c16 JL |
3480 | |
3481 | If there are no output operands but there are input operands, you must | |
3482 | place two consecutive colons surrounding the place where the output | |
c1f7febf RK |
3483 | operands would go. |
3484 | ||
84b72302 RH |
3485 | As of GCC version 3.1, it is also possible to specify input and output |
3486 | operands using symbolic names which can be referenced within the | |
3487 | assembler code. These names are specified inside square brackets | |
3488 | preceding the constraint string, and can be referenced inside the | |
3489 | assembler code using @code{%[@var{name}]} instead of a percentage sign | |
3490 | followed by the operand number. Using named operands the above example | |
3491 | could look like: | |
3492 | ||
3493 | @example | |
3494 | asm ("fsinx %[angle],%[output]" | |
3495 | : [output] "=f" (result) | |
3496 | : [angle] "f" (angle)); | |
3497 | @end example | |
3498 | ||
3499 | @noindent | |
3500 | Note that the symbolic operand names have no relation whatsoever to | |
3501 | other C identifiers. You may use any name you like, even those of | |
3502 | existing C symbols, but must ensure that no two operands within the same | |
3503 | assembler construct use the same symbolic name. | |
3504 | ||
c1f7febf | 3505 | Output operand expressions must be lvalues; the compiler can check this. |
c85f7c16 JL |
3506 | The input operands need not be lvalues. The compiler cannot check |
3507 | whether the operands have data types that are reasonable for the | |
3508 | instruction being executed. It does not parse the assembler instruction | |
3509 | template and does not know what it means or even whether it is valid | |
3510 | assembler input. The extended @code{asm} feature is most often used for | |
3511 | machine instructions the compiler itself does not know exist. If | |
3512 | the output expression cannot be directly addressed (for example, it is a | |
f0523f02 | 3513 | bit-field), your constraint must allow a register. In that case, GCC |
c85f7c16 JL |
3514 | will use the register as the output of the @code{asm}, and then store |
3515 | that register into the output. | |
3516 | ||
f0523f02 | 3517 | The ordinary output operands must be write-only; GCC will assume that |
c85f7c16 JL |
3518 | the values in these operands before the instruction are dead and need |
3519 | not be generated. Extended asm supports input-output or read-write | |
3520 | operands. Use the constraint character @samp{+} to indicate such an | |
3521 | operand and list it with the output operands. | |
3522 | ||
3523 | When the constraints for the read-write operand (or the operand in which | |
3524 | only some of the bits are to be changed) allows a register, you may, as | |
3525 | an alternative, logically split its function into two separate operands, | |
3526 | one input operand and one write-only output operand. The connection | |
3527 | between them is expressed by constraints which say they need to be in | |
3528 | the same location when the instruction executes. You can use the same C | |
3529 | expression for both operands, or different expressions. For example, | |
3530 | here we write the (fictitious) @samp{combine} instruction with | |
3531 | @code{bar} as its read-only source operand and @code{foo} as its | |
3532 | read-write destination: | |
c1f7febf RK |
3533 | |
3534 | @example | |
3535 | asm ("combine %2,%0" : "=r" (foo) : "0" (foo), "g" (bar)); | |
3536 | @end example | |
3537 | ||
3538 | @noindent | |
c85f7c16 | 3539 | The constraint @samp{"0"} for operand 1 says that it must occupy the |
84b72302 RH |
3540 | same location as operand 0. A number in constraint is allowed only in |
3541 | an input operand and it must refer to an output operand. | |
c1f7febf | 3542 | |
84b72302 | 3543 | Only a number in the constraint can guarantee that one operand will be in |
c85f7c16 JL |
3544 | the same place as another. The mere fact that @code{foo} is the value |
3545 | of both operands is not enough to guarantee that they will be in the | |
3546 | same place in the generated assembler code. The following would not | |
3547 | work reliably: | |
c1f7febf RK |
3548 | |
3549 | @example | |
3550 | asm ("combine %2,%0" : "=r" (foo) : "r" (foo), "g" (bar)); | |
3551 | @end example | |
3552 | ||
3553 | Various optimizations or reloading could cause operands 0 and 1 to be in | |
f0523f02 | 3554 | different registers; GCC knows no reason not to do so. For example, the |
c1f7febf RK |
3555 | compiler might find a copy of the value of @code{foo} in one register and |
3556 | use it for operand 1, but generate the output operand 0 in a different | |
3557 | register (copying it afterward to @code{foo}'s own address). Of course, | |
3558 | since the register for operand 1 is not even mentioned in the assembler | |
f0523f02 | 3559 | code, the result will not work, but GCC can't tell that. |
c1f7febf | 3560 | |
84b72302 RH |
3561 | As of GCC version 3.1, one may write @code{[@var{name}]} instead of |
3562 | the operand number for a matching constraint. For example: | |
3563 | ||
3564 | @example | |
3565 | asm ("cmoveq %1,%2,%[result]" | |
3566 | : [result] "=r"(result) | |
3567 | : "r" (test), "r"(new), "[result]"(old)); | |
3568 | @end example | |
3569 | ||
c85f7c16 JL |
3570 | Some instructions clobber specific hard registers. To describe this, |
3571 | write a third colon after the input operands, followed by the names of | |
3572 | the clobbered hard registers (given as strings). Here is a realistic | |
3573 | example for the VAX: | |
c1f7febf RK |
3574 | |
3575 | @example | |
3576 | asm volatile ("movc3 %0,%1,%2" | |
3577 | : /* no outputs */ | |
3578 | : "g" (from), "g" (to), "g" (count) | |
3579 | : "r0", "r1", "r2", "r3", "r4", "r5"); | |
3580 | @end example | |
3581 | ||
c5c76735 JL |
3582 | You may not write a clobber description in a way that overlaps with an |
3583 | input or output operand. For example, you may not have an operand | |
3584 | describing a register class with one member if you mention that register | |
3585 | in the clobber list. There is no way for you to specify that an input | |
3586 | operand is modified without also specifying it as an output | |
3587 | operand. Note that if all the output operands you specify are for this | |
3588 | purpose (and hence unused), you will then also need to specify | |
3589 | @code{volatile} for the @code{asm} construct, as described below, to | |
f0523f02 | 3590 | prevent GCC from deleting the @code{asm} statement as unused. |
8fe1938e | 3591 | |
c1f7febf | 3592 | If you refer to a particular hardware register from the assembler code, |
c85f7c16 JL |
3593 | you will probably have to list the register after the third colon to |
3594 | tell the compiler the register's value is modified. In some assemblers, | |
3595 | the register names begin with @samp{%}; to produce one @samp{%} in the | |
3596 | assembler code, you must write @samp{%%} in the input. | |
3597 | ||
3598 | If your assembler instruction can alter the condition code register, add | |
f0523f02 | 3599 | @samp{cc} to the list of clobbered registers. GCC on some machines |
c85f7c16 JL |
3600 | represents the condition codes as a specific hardware register; |
3601 | @samp{cc} serves to name this register. On other machines, the | |
3602 | condition code is handled differently, and specifying @samp{cc} has no | |
3603 | effect. But it is valid no matter what the machine. | |
c1f7febf RK |
3604 | |
3605 | If your assembler instruction modifies memory in an unpredictable | |
c85f7c16 | 3606 | fashion, add @samp{memory} to the list of clobbered registers. This |
f0523f02 | 3607 | will cause GCC to not keep memory values cached in registers across |
dd40655a GK |
3608 | the assembler instruction. You will also want to add the |
3609 | @code{volatile} keyword if the memory affected is not listed in the | |
3610 | inputs or outputs of the @code{asm}, as the @samp{memory} clobber does | |
3611 | not count as a side-effect of the @code{asm}. | |
c1f7febf | 3612 | |
c85f7c16 | 3613 | You can put multiple assembler instructions together in a single |
8720914b HPN |
3614 | @code{asm} template, separated by the characters normally used in assembly |
3615 | code for the system. A combination that works in most places is a newline | |
3616 | to break the line, plus a tab character to move to the instruction field | |
3617 | (written as @samp{\n\t}). Sometimes semicolons can be used, if the | |
3618 | assembler allows semicolons as a line-breaking character. Note that some | |
3619 | assembler dialects use semicolons to start a comment. | |
3620 | The input operands are guaranteed not to use any of the clobbered | |
c85f7c16 JL |
3621 | registers, and neither will the output operands' addresses, so you can |
3622 | read and write the clobbered registers as many times as you like. Here | |
3623 | is an example of multiple instructions in a template; it assumes the | |
3624 | subroutine @code{_foo} accepts arguments in registers 9 and 10: | |
c1f7febf RK |
3625 | |
3626 | @example | |
8720914b | 3627 | asm ("movl %0,r9\n\tmovl %1,r10\n\tcall _foo" |
c1f7febf RK |
3628 | : /* no outputs */ |
3629 | : "g" (from), "g" (to) | |
3630 | : "r9", "r10"); | |
3631 | @end example | |
3632 | ||
f0523f02 | 3633 | Unless an output operand has the @samp{&} constraint modifier, GCC |
c85f7c16 JL |
3634 | may allocate it in the same register as an unrelated input operand, on |
3635 | the assumption the inputs are consumed before the outputs are produced. | |
c1f7febf RK |
3636 | This assumption may be false if the assembler code actually consists of |
3637 | more than one instruction. In such a case, use @samp{&} for each output | |
c85f7c16 | 3638 | operand that may not overlap an input. @xref{Modifiers}. |
c1f7febf | 3639 | |
c85f7c16 JL |
3640 | If you want to test the condition code produced by an assembler |
3641 | instruction, you must include a branch and a label in the @code{asm} | |
3642 | construct, as follows: | |
c1f7febf RK |
3643 | |
3644 | @example | |
8720914b | 3645 | asm ("clr %0\n\tfrob %1\n\tbeq 0f\n\tmov #1,%0\n0:" |
c1f7febf RK |
3646 | : "g" (result) |
3647 | : "g" (input)); | |
3648 | @end example | |
3649 | ||
3650 | @noindent | |
3651 | This assumes your assembler supports local labels, as the GNU assembler | |
3652 | and most Unix assemblers do. | |
3653 | ||
3654 | Speaking of labels, jumps from one @code{asm} to another are not | |
c85f7c16 JL |
3655 | supported. The compiler's optimizers do not know about these jumps, and |
3656 | therefore they cannot take account of them when deciding how to | |
c1f7febf RK |
3657 | optimize. |
3658 | ||
3659 | @cindex macros containing @code{asm} | |
3660 | Usually the most convenient way to use these @code{asm} instructions is to | |
3661 | encapsulate them in macros that look like functions. For example, | |
3662 | ||
3663 | @example | |
3664 | #define sin(x) \ | |
3665 | (@{ double __value, __arg = (x); \ | |
3666 | asm ("fsinx %1,%0": "=f" (__value): "f" (__arg)); \ | |
3667 | __value; @}) | |
3668 | @end example | |
3669 | ||
3670 | @noindent | |
3671 | Here the variable @code{__arg} is used to make sure that the instruction | |
3672 | operates on a proper @code{double} value, and to accept only those | |
3673 | arguments @code{x} which can convert automatically to a @code{double}. | |
3674 | ||
c85f7c16 JL |
3675 | Another way to make sure the instruction operates on the correct data |
3676 | type is to use a cast in the @code{asm}. This is different from using a | |
c1f7febf RK |
3677 | variable @code{__arg} in that it converts more different types. For |
3678 | example, if the desired type were @code{int}, casting the argument to | |
3679 | @code{int} would accept a pointer with no complaint, while assigning the | |
3680 | argument to an @code{int} variable named @code{__arg} would warn about | |
3681 | using a pointer unless the caller explicitly casts it. | |
3682 | ||
f0523f02 | 3683 | If an @code{asm} has output operands, GCC assumes for optimization |
c85f7c16 JL |
3684 | purposes the instruction has no side effects except to change the output |
3685 | operands. This does not mean instructions with a side effect cannot be | |
3686 | used, but you must be careful, because the compiler may eliminate them | |
3687 | if the output operands aren't used, or move them out of loops, or | |
3688 | replace two with one if they constitute a common subexpression. Also, | |
3689 | if your instruction does have a side effect on a variable that otherwise | |
3690 | appears not to change, the old value of the variable may be reused later | |
3691 | if it happens to be found in a register. | |
c1f7febf RK |
3692 | |
3693 | You can prevent an @code{asm} instruction from being deleted, moved | |
3694 | significantly, or combined, by writing the keyword @code{volatile} after | |
3695 | the @code{asm}. For example: | |
3696 | ||
3697 | @example | |
310668e8 JM |
3698 | #define get_and_set_priority(new) \ |
3699 | (@{ int __old; \ | |
3700 | asm volatile ("get_and_set_priority %0, %1" \ | |
3701 | : "=g" (__old) : "g" (new)); \ | |
c85f7c16 | 3702 | __old; @}) |
24f98470 | 3703 | @end example |
c1f7febf RK |
3704 | |
3705 | @noindent | |
f0523f02 | 3706 | If you write an @code{asm} instruction with no outputs, GCC will know |
c85f7c16 | 3707 | the instruction has side-effects and will not delete the instruction or |
e71b34aa | 3708 | move it outside of loops. |
c85f7c16 | 3709 | |
e71b34aa MM |
3710 | The @code{volatile} keyword indicates that the instruction has |
3711 | important side-effects. GCC will not delete a volatile @code{asm} if | |
3712 | it is reachable. (The instruction can still be deleted if GCC can | |
3713 | prove that control-flow will never reach the location of the | |
3714 | instruction.) In addition, GCC will not reschedule instructions | |
3715 | across a volatile @code{asm} instruction. For example: | |
3716 | ||
3717 | @example | |
bd78000b | 3718 | *(volatile int *)addr = foo; |
e71b34aa MM |
3719 | asm volatile ("eieio" : : ); |
3720 | @end example | |
3721 | ||
ebb48a4d | 3722 | @noindent |
e71b34aa MM |
3723 | Assume @code{addr} contains the address of a memory mapped device |
3724 | register. The PowerPC @code{eieio} instruction (Enforce In-order | |
aee96fe9 | 3725 | Execution of I/O) tells the CPU to make sure that the store to that |
161d7b59 | 3726 | device register happens before it issues any other I/O@. |
c1f7febf RK |
3727 | |
3728 | Note that even a volatile @code{asm} instruction can be moved in ways | |
3729 | that appear insignificant to the compiler, such as across jump | |
3730 | instructions. You can't expect a sequence of volatile @code{asm} | |
3731 | instructions to remain perfectly consecutive. If you want consecutive | |
e71b34aa MM |
3732 | output, use a single @code{asm}. Also, GCC will perform some |
3733 | optimizations across a volatile @code{asm} instruction; GCC does not | |
3734 | ``forget everything'' when it encounters a volatile @code{asm} | |
3735 | instruction the way some other compilers do. | |
3736 | ||
3737 | An @code{asm} instruction without any operands or clobbers (an ``old | |
3738 | style'' @code{asm}) will be treated identically to a volatile | |
3739 | @code{asm} instruction. | |
c1f7febf RK |
3740 | |
3741 | It is a natural idea to look for a way to give access to the condition | |
3742 | code left by the assembler instruction. However, when we attempted to | |
3743 | implement this, we found no way to make it work reliably. The problem | |
3744 | is that output operands might need reloading, which would result in | |
3745 | additional following ``store'' instructions. On most machines, these | |
3746 | instructions would alter the condition code before there was time to | |
3747 | test it. This problem doesn't arise for ordinary ``test'' and | |
3748 | ``compare'' instructions because they don't have any output operands. | |
3749 | ||
eda3fbbe GB |
3750 | For reasons similar to those described above, it is not possible to give |
3751 | an assembler instruction access to the condition code left by previous | |
3752 | instructions. | |
3753 | ||
5490d604 | 3754 | If you are writing a header file that should be includable in ISO C |
c1f7febf RK |
3755 | programs, write @code{__asm__} instead of @code{asm}. @xref{Alternate |
3756 | Keywords}. | |
3757 | ||
fe0ce426 JH |
3758 | @subsection i386 floating point asm operands |
3759 | ||
3760 | There are several rules on the usage of stack-like regs in | |
3761 | asm_operands insns. These rules apply only to the operands that are | |
3762 | stack-like regs: | |
3763 | ||
3764 | @enumerate | |
3765 | @item | |
3766 | Given a set of input regs that die in an asm_operands, it is | |
3767 | necessary to know which are implicitly popped by the asm, and | |
3768 | which must be explicitly popped by gcc. | |
3769 | ||
3770 | An input reg that is implicitly popped by the asm must be | |
3771 | explicitly clobbered, unless it is constrained to match an | |
3772 | output operand. | |
3773 | ||
3774 | @item | |
3775 | For any input reg that is implicitly popped by an asm, it is | |
3776 | necessary to know how to adjust the stack to compensate for the pop. | |
3777 | If any non-popped input is closer to the top of the reg-stack than | |
3778 | the implicitly popped reg, it would not be possible to know what the | |
84330467 | 3779 | stack looked like---it's not clear how the rest of the stack ``slides |
fe0ce426 JH |
3780 | up''. |
3781 | ||
3782 | All implicitly popped input regs must be closer to the top of | |
3783 | the reg-stack than any input that is not implicitly popped. | |
3784 | ||
3785 | It is possible that if an input dies in an insn, reload might | |
3786 | use the input reg for an output reload. Consider this example: | |
3787 | ||
3788 | @example | |
3789 | asm ("foo" : "=t" (a) : "f" (b)); | |
3790 | @end example | |
3791 | ||
3792 | This asm says that input B is not popped by the asm, and that | |
c771326b | 3793 | the asm pushes a result onto the reg-stack, i.e., the stack is one |
fe0ce426 JH |
3794 | deeper after the asm than it was before. But, it is possible that |
3795 | reload will think that it can use the same reg for both the input and | |
3796 | the output, if input B dies in this insn. | |
3797 | ||
3798 | If any input operand uses the @code{f} constraint, all output reg | |
3799 | constraints must use the @code{&} earlyclobber. | |
3800 | ||
3801 | The asm above would be written as | |
3802 | ||
3803 | @example | |
3804 | asm ("foo" : "=&t" (a) : "f" (b)); | |
3805 | @end example | |
3806 | ||
3807 | @item | |
3808 | Some operands need to be in particular places on the stack. All | |
84330467 | 3809 | output operands fall in this category---there is no other way to |
fe0ce426 JH |
3810 | know which regs the outputs appear in unless the user indicates |
3811 | this in the constraints. | |
3812 | ||
3813 | Output operands must specifically indicate which reg an output | |
3814 | appears in after an asm. @code{=f} is not allowed: the operand | |
3815 | constraints must select a class with a single reg. | |
3816 | ||
3817 | @item | |
3818 | Output operands may not be ``inserted'' between existing stack regs. | |
3819 | Since no 387 opcode uses a read/write operand, all output operands | |
3820 | are dead before the asm_operands, and are pushed by the asm_operands. | |
3821 | It makes no sense to push anywhere but the top of the reg-stack. | |
3822 | ||
3823 | Output operands must start at the top of the reg-stack: output | |
3824 | operands may not ``skip'' a reg. | |
3825 | ||
3826 | @item | |
3827 | Some asm statements may need extra stack space for internal | |
3828 | calculations. This can be guaranteed by clobbering stack registers | |
3829 | unrelated to the inputs and outputs. | |
3830 | ||
3831 | @end enumerate | |
3832 | ||
3833 | Here are a couple of reasonable asms to want to write. This asm | |
3834 | takes one input, which is internally popped, and produces two outputs. | |
3835 | ||
3836 | @example | |
3837 | asm ("fsincos" : "=t" (cos), "=u" (sin) : "0" (inp)); | |
3838 | @end example | |
3839 | ||
3840 | This asm takes two inputs, which are popped by the @code{fyl2xp1} opcode, | |
3841 | and replaces them with one output. The user must code the @code{st(1)} | |
3842 | clobber for reg-stack.c to know that @code{fyl2xp1} pops both inputs. | |
3843 | ||
3844 | @example | |
3845 | asm ("fyl2xp1" : "=t" (result) : "0" (x), "u" (y) : "st(1)"); | |
3846 | @end example | |
3847 | ||
c1f7febf | 3848 | @include md.texi |
c1f7febf RK |
3849 | |
3850 | @node Asm Labels | |
3851 | @section Controlling Names Used in Assembler Code | |
3852 | @cindex assembler names for identifiers | |
3853 | @cindex names used in assembler code | |
3854 | @cindex identifiers, names in assembler code | |
3855 | ||
3856 | You can specify the name to be used in the assembler code for a C | |
3857 | function or variable by writing the @code{asm} (or @code{__asm__}) | |
3858 | keyword after the declarator as follows: | |
3859 | ||
3860 | @example | |
3861 | int foo asm ("myfoo") = 2; | |
3862 | @end example | |
3863 | ||
3864 | @noindent | |
3865 | This specifies that the name to be used for the variable @code{foo} in | |
3866 | the assembler code should be @samp{myfoo} rather than the usual | |
3867 | @samp{_foo}. | |
3868 | ||
3869 | On systems where an underscore is normally prepended to the name of a C | |
3870 | function or variable, this feature allows you to define names for the | |
3871 | linker that do not start with an underscore. | |
3872 | ||
0adc3c19 MM |
3873 | It does not make sense to use this feature with a non-static local |
3874 | variable since such variables do not have assembler names. If you are | |
3875 | trying to put the variable in a particular register, see @ref{Explicit | |
3876 | Reg Vars}. GCC presently accepts such code with a warning, but will | |
3877 | probably be changed to issue an error, rather than a warning, in the | |
3878 | future. | |
3879 | ||
c1f7febf RK |
3880 | You cannot use @code{asm} in this way in a function @emph{definition}; but |
3881 | you can get the same effect by writing a declaration for the function | |
3882 | before its definition and putting @code{asm} there, like this: | |
3883 | ||
3884 | @example | |
3885 | extern func () asm ("FUNC"); | |
3886 | ||
3887 | func (x, y) | |
3888 | int x, y; | |
3889 | @dots{} | |
3890 | @end example | |
3891 | ||
3892 | It is up to you to make sure that the assembler names you choose do not | |
3893 | conflict with any other assembler symbols. Also, you must not use a | |
f0523f02 JM |
3894 | register name; that would produce completely invalid assembler code. GCC |
3895 | does not as yet have the ability to store static variables in registers. | |
c1f7febf RK |
3896 | Perhaps that will be added. |
3897 | ||
3898 | @node Explicit Reg Vars | |
3899 | @section Variables in Specified Registers | |
3900 | @cindex explicit register variables | |
3901 | @cindex variables in specified registers | |
3902 | @cindex specified registers | |
3903 | @cindex registers, global allocation | |
3904 | ||
3905 | GNU C allows you to put a few global variables into specified hardware | |
3906 | registers. You can also specify the register in which an ordinary | |
3907 | register variable should be allocated. | |
3908 | ||
3909 | @itemize @bullet | |
3910 | @item | |
3911 | Global register variables reserve registers throughout the program. | |
3912 | This may be useful in programs such as programming language | |
3913 | interpreters which have a couple of global variables that are accessed | |
3914 | very often. | |
3915 | ||
3916 | @item | |
3917 | Local register variables in specific registers do not reserve the | |
3918 | registers. The compiler's data flow analysis is capable of determining | |
3919 | where the specified registers contain live values, and where they are | |
8d344fbc | 3920 | available for other uses. Stores into local register variables may be deleted |
0deaf590 JL |
3921 | when they appear to be dead according to dataflow analysis. References |
3922 | to local register variables may be deleted or moved or simplified. | |
c1f7febf RK |
3923 | |
3924 | These local variables are sometimes convenient for use with the extended | |
3925 | @code{asm} feature (@pxref{Extended Asm}), if you want to write one | |
3926 | output of the assembler instruction directly into a particular register. | |
3927 | (This will work provided the register you specify fits the constraints | |
3928 | specified for that operand in the @code{asm}.) | |
3929 | @end itemize | |
3930 | ||
3931 | @menu | |
3932 | * Global Reg Vars:: | |
3933 | * Local Reg Vars:: | |
3934 | @end menu | |
3935 | ||
3936 | @node Global Reg Vars | |
3937 | @subsection Defining Global Register Variables | |
3938 | @cindex global register variables | |
3939 | @cindex registers, global variables in | |
3940 | ||
3941 | You can define a global register variable in GNU C like this: | |
3942 | ||
3943 | @example | |
3944 | register int *foo asm ("a5"); | |
3945 | @end example | |
3946 | ||
3947 | @noindent | |
3948 | Here @code{a5} is the name of the register which should be used. Choose a | |
3949 | register which is normally saved and restored by function calls on your | |
3950 | machine, so that library routines will not clobber it. | |
3951 | ||
3952 | Naturally the register name is cpu-dependent, so you would need to | |
3953 | conditionalize your program according to cpu type. The register | |
3954 | @code{a5} would be a good choice on a 68000 for a variable of pointer | |
3955 | type. On machines with register windows, be sure to choose a ``global'' | |
3956 | register that is not affected magically by the function call mechanism. | |
3957 | ||
3958 | In addition, operating systems on one type of cpu may differ in how they | |
3959 | name the registers; then you would need additional conditionals. For | |
3960 | example, some 68000 operating systems call this register @code{%a5}. | |
3961 | ||
3962 | Eventually there may be a way of asking the compiler to choose a register | |
3963 | automatically, but first we need to figure out how it should choose and | |
3964 | how to enable you to guide the choice. No solution is evident. | |
3965 | ||
3966 | Defining a global register variable in a certain register reserves that | |
3967 | register entirely for this use, at least within the current compilation. | |
3968 | The register will not be allocated for any other purpose in the functions | |
3969 | in the current compilation. The register will not be saved and restored by | |
3970 | these functions. Stores into this register are never deleted even if they | |
3971 | would appear to be dead, but references may be deleted or moved or | |
3972 | simplified. | |
3973 | ||
3974 | It is not safe to access the global register variables from signal | |
3975 | handlers, or from more than one thread of control, because the system | |
3976 | library routines may temporarily use the register for other things (unless | |
3977 | you recompile them specially for the task at hand). | |
3978 | ||
3979 | @cindex @code{qsort}, and global register variables | |
3980 | It is not safe for one function that uses a global register variable to | |
3981 | call another such function @code{foo} by way of a third function | |
e979f9e8 | 3982 | @code{lose} that was compiled without knowledge of this variable (i.e.@: in a |
c1f7febf RK |
3983 | different source file in which the variable wasn't declared). This is |
3984 | because @code{lose} might save the register and put some other value there. | |
3985 | For example, you can't expect a global register variable to be available in | |
3986 | the comparison-function that you pass to @code{qsort}, since @code{qsort} | |
3987 | might have put something else in that register. (If you are prepared to | |
3988 | recompile @code{qsort} with the same global register variable, you can | |
3989 | solve this problem.) | |
3990 | ||
3991 | If you want to recompile @code{qsort} or other source files which do not | |
3992 | actually use your global register variable, so that they will not use that | |
3993 | register for any other purpose, then it suffices to specify the compiler | |
84330467 | 3994 | option @option{-ffixed-@var{reg}}. You need not actually add a global |
c1f7febf RK |
3995 | register declaration to their source code. |
3996 | ||
3997 | A function which can alter the value of a global register variable cannot | |
3998 | safely be called from a function compiled without this variable, because it | |
3999 | could clobber the value the caller expects to find there on return. | |
4000 | Therefore, the function which is the entry point into the part of the | |
4001 | program that uses the global register variable must explicitly save and | |
4002 | restore the value which belongs to its caller. | |
4003 | ||
4004 | @cindex register variable after @code{longjmp} | |
4005 | @cindex global register after @code{longjmp} | |
4006 | @cindex value after @code{longjmp} | |
4007 | @findex longjmp | |
4008 | @findex setjmp | |
4009 | On most machines, @code{longjmp} will restore to each global register | |
4010 | variable the value it had at the time of the @code{setjmp}. On some | |
4011 | machines, however, @code{longjmp} will not change the value of global | |
4012 | register variables. To be portable, the function that called @code{setjmp} | |
4013 | should make other arrangements to save the values of the global register | |
4014 | variables, and to restore them in a @code{longjmp}. This way, the same | |
4015 | thing will happen regardless of what @code{longjmp} does. | |
4016 | ||
4017 | All global register variable declarations must precede all function | |
4018 | definitions. If such a declaration could appear after function | |
4019 | definitions, the declaration would be too late to prevent the register from | |
4020 | being used for other purposes in the preceding functions. | |
4021 | ||
4022 | Global register variables may not have initial values, because an | |
4023 | executable file has no means to supply initial contents for a register. | |
4024 | ||
4025 | On the Sparc, there are reports that g3 @dots{} g7 are suitable | |
4026 | registers, but certain library functions, such as @code{getwd}, as well | |
4027 | as the subroutines for division and remainder, modify g3 and g4. g1 and | |
4028 | g2 are local temporaries. | |
4029 | ||
4030 | On the 68000, a2 @dots{} a5 should be suitable, as should d2 @dots{} d7. | |
4031 | Of course, it will not do to use more than a few of those. | |
4032 | ||
4033 | @node Local Reg Vars | |
4034 | @subsection Specifying Registers for Local Variables | |
4035 | @cindex local variables, specifying registers | |
4036 | @cindex specifying registers for local variables | |
4037 | @cindex registers for local variables | |
4038 | ||
4039 | You can define a local register variable with a specified register | |
4040 | like this: | |
4041 | ||
4042 | @example | |
4043 | register int *foo asm ("a5"); | |
4044 | @end example | |
4045 | ||
4046 | @noindent | |
4047 | Here @code{a5} is the name of the register which should be used. Note | |
4048 | that this is the same syntax used for defining global register | |
4049 | variables, but for a local variable it would appear within a function. | |
4050 | ||
4051 | Naturally the register name is cpu-dependent, but this is not a | |
4052 | problem, since specific registers are most often useful with explicit | |
4053 | assembler instructions (@pxref{Extended Asm}). Both of these things | |
4054 | generally require that you conditionalize your program according to | |
4055 | cpu type. | |
4056 | ||
4057 | In addition, operating systems on one type of cpu may differ in how they | |
4058 | name the registers; then you would need additional conditionals. For | |
4059 | example, some 68000 operating systems call this register @code{%a5}. | |
4060 | ||
c1f7febf RK |
4061 | Defining such a register variable does not reserve the register; it |
4062 | remains available for other uses in places where flow control determines | |
4063 | the variable's value is not live. However, these registers are made | |
e5e809f4 JL |
4064 | unavailable for use in the reload pass; excessive use of this feature |
4065 | leaves the compiler too few available registers to compile certain | |
4066 | functions. | |
4067 | ||
f0523f02 | 4068 | This option does not guarantee that GCC will generate code that has |
e5e809f4 JL |
4069 | this variable in the register you specify at all times. You may not |
4070 | code an explicit reference to this register in an @code{asm} statement | |
4071 | and assume it will always refer to this variable. | |
c1f7febf | 4072 | |
8d344fbc | 4073 | Stores into local register variables may be deleted when they appear to be dead |
0deaf590 JL |
4074 | according to dataflow analysis. References to local register variables may |
4075 | be deleted or moved or simplified. | |
4076 | ||
c1f7febf RK |
4077 | @node Alternate Keywords |
4078 | @section Alternate Keywords | |
4079 | @cindex alternate keywords | |
4080 | @cindex keywords, alternate | |
4081 | ||
5490d604 | 4082 | @option{-ansi} and the various @option{-std} options disable certain |
f458d1d5 ZW |
4083 | keywords. This causes trouble when you want to use GNU C extensions, or |
4084 | a general-purpose header file that should be usable by all programs, | |
4085 | including ISO C programs. The keywords @code{asm}, @code{typeof} and | |
4086 | @code{inline} are not available in programs compiled with | |
4087 | @option{-ansi} or @option{-std} (although @code{inline} can be used in a | |
4088 | program compiled with @option{-std=c99}). The ISO C99 keyword | |
5490d604 JM |
4089 | @code{restrict} is only available when @option{-std=gnu99} (which will |
4090 | eventually be the default) or @option{-std=c99} (or the equivalent | |
bd819a4a | 4091 | @option{-std=iso9899:1999}) is used. |
c1f7febf RK |
4092 | |
4093 | The way to solve these problems is to put @samp{__} at the beginning and | |
4094 | end of each problematical keyword. For example, use @code{__asm__} | |
f458d1d5 | 4095 | instead of @code{asm}, and @code{__inline__} instead of @code{inline}. |
c1f7febf RK |
4096 | |
4097 | Other C compilers won't accept these alternative keywords; if you want to | |
4098 | compile with another compiler, you can define the alternate keywords as | |
4099 | macros to replace them with the customary keywords. It looks like this: | |
4100 | ||
4101 | @example | |
4102 | #ifndef __GNUC__ | |
4103 | #define __asm__ asm | |
4104 | #endif | |
4105 | @end example | |
4106 | ||
6e6b0525 | 4107 | @findex __extension__ |
84330467 JM |
4108 | @opindex pedantic |
4109 | @option{-pedantic} and other options cause warnings for many GNU C extensions. | |
dbe519e0 | 4110 | You can |
c1f7febf RK |
4111 | prevent such warnings within one expression by writing |
4112 | @code{__extension__} before the expression. @code{__extension__} has no | |
4113 | effect aside from this. | |
4114 | ||
4115 | @node Incomplete Enums | |
4116 | @section Incomplete @code{enum} Types | |
4117 | ||
4118 | You can define an @code{enum} tag without specifying its possible values. | |
4119 | This results in an incomplete type, much like what you get if you write | |
4120 | @code{struct foo} without describing the elements. A later declaration | |
4121 | which does specify the possible values completes the type. | |
4122 | ||
4123 | You can't allocate variables or storage using the type while it is | |
4124 | incomplete. However, you can work with pointers to that type. | |
4125 | ||
4126 | This extension may not be very useful, but it makes the handling of | |
4127 | @code{enum} more consistent with the way @code{struct} and @code{union} | |
4128 | are handled. | |
4129 | ||
4130 | This extension is not supported by GNU C++. | |
4131 | ||
4132 | @node Function Names | |
4133 | @section Function Names as Strings | |
4b404517 JM |
4134 | @cindex @code{__FUNCTION__} identifier |
4135 | @cindex @code{__PRETTY_FUNCTION__} identifier | |
4136 | @cindex @code{__func__} identifier | |
c1f7febf | 4137 | |
f0523f02 | 4138 | GCC predefines two magic identifiers to hold the name of the current |
767094dd JM |
4139 | function. The identifier @code{__FUNCTION__} holds the name of the function |
4140 | as it appears in the source. The identifier @code{__PRETTY_FUNCTION__} | |
22acfb79 NM |
4141 | holds the name of the function pretty printed in a language specific |
4142 | fashion. | |
c1f7febf RK |
4143 | |
4144 | These names are always the same in a C function, but in a C++ function | |
4145 | they may be different. For example, this program: | |
4146 | ||
4147 | @smallexample | |
4148 | extern "C" @{ | |
4149 | extern int printf (char *, ...); | |
4150 | @} | |
4151 | ||
4152 | class a @{ | |
4153 | public: | |
4154 | sub (int i) | |
4155 | @{ | |
4156 | printf ("__FUNCTION__ = %s\n", __FUNCTION__); | |
4157 | printf ("__PRETTY_FUNCTION__ = %s\n", __PRETTY_FUNCTION__); | |
4158 | @} | |
4159 | @}; | |
4160 | ||
4161 | int | |
4162 | main (void) | |
4163 | @{ | |
4164 | a ax; | |
4165 | ax.sub (0); | |
4166 | return 0; | |
4167 | @} | |
4168 | @end smallexample | |
4169 | ||
4170 | @noindent | |
4171 | gives this output: | |
4172 | ||
4173 | @smallexample | |
4174 | __FUNCTION__ = sub | |
4175 | __PRETTY_FUNCTION__ = int a::sub (int) | |
4176 | @end smallexample | |
4177 | ||
22acfb79 | 4178 | The compiler automagically replaces the identifiers with a string |
767094dd | 4179 | literal containing the appropriate name. Thus, they are neither |
22acfb79 | 4180 | preprocessor macros, like @code{__FILE__} and @code{__LINE__}, nor |
767094dd JM |
4181 | variables. This means that they catenate with other string literals, and |
4182 | that they can be used to initialize char arrays. For example | |
22acfb79 NM |
4183 | |
4184 | @smallexample | |
4185 | char here[] = "Function " __FUNCTION__ " in " __FILE__; | |
4186 | @end smallexample | |
4187 | ||
4188 | On the other hand, @samp{#ifdef __FUNCTION__} does not have any special | |
c1f7febf RK |
4189 | meaning inside a function, since the preprocessor does not do anything |
4190 | special with the identifier @code{__FUNCTION__}. | |
4191 | ||
9aa8a1df NB |
4192 | Note that these semantics are deprecated, and that GCC 3.2 will handle |
4193 | @code{__FUNCTION__} and @code{__PRETTY_FUNCTION__} the same way as | |
4194 | @code{__func__}. @code{__func__} is defined by the ISO standard C99: | |
22acfb79 NM |
4195 | |
4196 | @display | |
4197 | The identifier @code{__func__} is implicitly declared by the translator | |
4198 | as if, immediately following the opening brace of each function | |
4199 | definition, the declaration | |
4200 | ||
4201 | @smallexample | |
4202 | static const char __func__[] = "function-name"; | |
4203 | @end smallexample | |
4204 | ||
4205 | appeared, where function-name is the name of the lexically-enclosing | |
767094dd | 4206 | function. This name is the unadorned name of the function. |
22acfb79 NM |
4207 | @end display |
4208 | ||
4209 | By this definition, @code{__func__} is a variable, not a string literal. | |
4210 | In particular, @code{__func__} does not catenate with other string | |
4211 | literals. | |
4212 | ||
4213 | In @code{C++}, @code{__FUNCTION__} and @code{__PRETTY_FUNCTION__} are | |
4214 | variables, declared in the same way as @code{__func__}. | |
4215 | ||
c1f7febf RK |
4216 | @node Return Address |
4217 | @section Getting the Return or Frame Address of a Function | |
4218 | ||
4219 | These functions may be used to get information about the callers of a | |
4220 | function. | |
4221 | ||
84330467 | 4222 | @deftypefn {Built-in Function} {void *} __builtin_return_address (unsigned int @var{level}) |
c1f7febf RK |
4223 | This function returns the return address of the current function, or of |
4224 | one of its callers. The @var{level} argument is number of frames to | |
4225 | scan up the call stack. A value of @code{0} yields the return address | |
4226 | of the current function, a value of @code{1} yields the return address | |
4227 | of the caller of the current function, and so forth. | |
4228 | ||
4229 | The @var{level} argument must be a constant integer. | |
4230 | ||
4231 | On some machines it may be impossible to determine the return address of | |
4232 | any function other than the current one; in such cases, or when the top | |
dd96fbc5 L |
4233 | of the stack has been reached, this function will return @code{0} or a |
4234 | random value. In addition, @code{__builtin_frame_address} may be used | |
4235 | to determine if the top of the stack has been reached. | |
c1f7febf | 4236 | |
df2a54e9 | 4237 | This function should only be used with a nonzero argument for debugging |
c1f7febf | 4238 | purposes. |
84330467 | 4239 | @end deftypefn |
c1f7febf | 4240 | |
84330467 | 4241 | @deftypefn {Built-in Function} {void *} __builtin_frame_address (unsigned int @var{level}) |
c1f7febf RK |
4242 | This function is similar to @code{__builtin_return_address}, but it |
4243 | returns the address of the function frame rather than the return address | |
4244 | of the function. Calling @code{__builtin_frame_address} with a value of | |
4245 | @code{0} yields the frame address of the current function, a value of | |
4246 | @code{1} yields the frame address of the caller of the current function, | |
4247 | and so forth. | |
4248 | ||
4249 | The frame is the area on the stack which holds local variables and saved | |
4250 | registers. The frame address is normally the address of the first word | |
4251 | pushed on to the stack by the function. However, the exact definition | |
4252 | depends upon the processor and the calling convention. If the processor | |
4253 | has a dedicated frame pointer register, and the function has a frame, | |
4254 | then @code{__builtin_frame_address} will return the value of the frame | |
4255 | pointer register. | |
4256 | ||
dd96fbc5 L |
4257 | On some machines it may be impossible to determine the frame address of |
4258 | any function other than the current one; in such cases, or when the top | |
4259 | of the stack has been reached, this function will return @code{0} if | |
4260 | the first frame pointer is properly initialized by the startup code. | |
4261 | ||
df2a54e9 | 4262 | This function should only be used with a nonzero argument for debugging |
dd96fbc5 | 4263 | purposes. |
84330467 | 4264 | @end deftypefn |
c1f7febf | 4265 | |
1255c85c BS |
4266 | @node Vector Extensions |
4267 | @section Using vector instructions through built-in functions | |
4268 | ||
4269 | On some targets, the instruction set contains SIMD vector instructions that | |
4270 | operate on multiple values contained in one large register at the same time. | |
4271 | For example, on the i386 the MMX, 3Dnow! and SSE extensions can be used | |
4272 | this way. | |
4273 | ||
4274 | The first step in using these extensions is to provide the necessary data | |
4275 | types. This should be done using an appropriate @code{typedef}: | |
4276 | ||
4277 | @example | |
4278 | typedef int v4si __attribute__ ((mode(V4SI))); | |
4279 | @end example | |
4280 | ||
4281 | The base type @code{int} is effectively ignored by the compiler, the | |
4282 | actual properties of the new type @code{v4si} are defined by the | |
4283 | @code{__attribute__}. It defines the machine mode to be used; for vector | |
80ebf43e BS |
4284 | types these have the form @code{V@var{n}@var{B}}; @var{n} should be the |
4285 | number of elements in the vector, and @var{B} should be the base mode of the | |
1255c85c BS |
4286 | individual elements. The following can be used as base modes: |
4287 | ||
4288 | @table @code | |
4289 | @item QI | |
4290 | An integer that is as wide as the smallest addressable unit, usually 8 bits. | |
4291 | @item HI | |
4292 | An integer, twice as wide as a QI mode integer, usually 16 bits. | |
4293 | @item SI | |
4294 | An integer, four times as wide as a QI mode integer, usually 32 bits. | |
4295 | @item DI | |
4296 | An integer, eight times as wide as a QI mode integer, usually 64 bits. | |
4297 | @item SF | |
4298 | A floating point value, as wide as a SI mode integer, usually 32 bits. | |
4299 | @item DF | |
4300 | A floating point value, as wide as a DI mode integer, usually 64 bits. | |
4301 | @end table | |
4302 | ||
4303 | Not all base types or combinations are always valid; which modes can be used | |
4304 | is determined by the target machine. For example, if targetting the i386 MMX | |
4305 | extensions, only @code{V8QI}, @code{V4HI} and @code{V2SI} are allowed modes. | |
4306 | ||
4307 | There are no @code{V1xx} vector modes - they would be identical to the | |
4308 | corresponding base mode. | |
4309 | ||
4310 | There is no distinction between signed and unsigned vector modes. This | |
4311 | distinction is made by the operations that perform on the vectors, not | |
4312 | by the data type. | |
4313 | ||
4314 | The types defined in this manner are somewhat special, they cannot be | |
4315 | used with most normal C operations (i.e., a vector addition can @emph{not} | |
4316 | be represented by a normal addition of two vector type variables). You | |
4317 | can declare only variables and use them in function calls and returns, as | |
4318 | well as in assignments and some casts. It is possible to cast from one | |
4319 | vector type to another, provided they are of the same size (in fact, you | |
4320 | can also cast vectors to and from other datatypes of the same size). | |
4321 | ||
4322 | A port that supports vector operations provides a set of built-in functions | |
4323 | that can be used to operate on vectors. For example, a function to add two | |
4324 | vectors and multiply the result by a third could look like this: | |
4325 | ||
4326 | @example | |
4327 | v4si f (v4si a, v4si b, v4si c) | |
4328 | @{ | |
4329 | v4si tmp = __builtin_addv4si (a, b); | |
4330 | return __builtin_mulv4si (tmp, c); | |
4331 | @} | |
4332 | ||
4333 | @end example | |
4334 | ||
185ebd6c | 4335 | @node Other Builtins |
f0523f02 | 4336 | @section Other built-in functions provided by GCC |
c771326b | 4337 | @cindex built-in functions |
01702459 JM |
4338 | @findex __builtin_isgreater |
4339 | @findex __builtin_isgreaterequal | |
4340 | @findex __builtin_isless | |
4341 | @findex __builtin_islessequal | |
4342 | @findex __builtin_islessgreater | |
4343 | @findex __builtin_isunordered | |
4344 | @findex abort | |
4345 | @findex abs | |
4346 | @findex alloca | |
4347 | @findex bcmp | |
4348 | @findex bzero | |
341e3d11 JM |
4349 | @findex cimag |
4350 | @findex cimagf | |
4351 | @findex cimagl | |
4352 | @findex conj | |
4353 | @findex conjf | |
4354 | @findex conjl | |
01702459 JM |
4355 | @findex cos |
4356 | @findex cosf | |
4357 | @findex cosl | |
341e3d11 JM |
4358 | @findex creal |
4359 | @findex crealf | |
4360 | @findex creall | |
01702459 JM |
4361 | @findex exit |
4362 | @findex _exit | |
796cdb65 | 4363 | @findex _Exit |
01702459 JM |
4364 | @findex fabs |
4365 | @findex fabsf | |
4366 | @findex fabsl | |
4367 | @findex ffs | |
18f988a0 | 4368 | @findex fprintf |
b4c984fb | 4369 | @findex fprintf_unlocked |
01702459 | 4370 | @findex fputs |
b4c984fb | 4371 | @findex fputs_unlocked |
e78f4a97 | 4372 | @findex imaxabs |
c7b6c6cd | 4373 | @findex index |
01702459 JM |
4374 | @findex labs |
4375 | @findex llabs | |
4376 | @findex memcmp | |
4377 | @findex memcpy | |
4378 | @findex memset | |
4379 | @findex printf | |
b4c984fb | 4380 | @findex printf_unlocked |
c7b6c6cd | 4381 | @findex rindex |
01702459 JM |
4382 | @findex sin |
4383 | @findex sinf | |
4384 | @findex sinl | |
4385 | @findex sqrt | |
4386 | @findex sqrtf | |
4387 | @findex sqrtl | |
d118937d | 4388 | @findex strcat |
01702459 JM |
4389 | @findex strchr |
4390 | @findex strcmp | |
4391 | @findex strcpy | |
d118937d | 4392 | @findex strcspn |
01702459 | 4393 | @findex strlen |
d118937d | 4394 | @findex strncat |
da9e9f08 KG |
4395 | @findex strncmp |
4396 | @findex strncpy | |
01702459 JM |
4397 | @findex strpbrk |
4398 | @findex strrchr | |
d118937d | 4399 | @findex strspn |
01702459 | 4400 | @findex strstr |
185ebd6c | 4401 | |
f0523f02 | 4402 | GCC provides a large number of built-in functions other than the ones |
185ebd6c RH |
4403 | mentioned above. Some of these are for internal use in the processing |
4404 | of exceptions or variable-length argument lists and will not be | |
4405 | documented here because they may change from time to time; we do not | |
4406 | recommend general use of these functions. | |
4407 | ||
4408 | The remaining functions are provided for optimization purposes. | |
4409 | ||
84330467 | 4410 | @opindex fno-builtin |
9c34dbbf ZW |
4411 | GCC includes built-in versions of many of the functions in the standard |
4412 | C library. The versions prefixed with @code{__builtin_} will always be | |
4413 | treated as having the same meaning as the C library function even if you | |
4414 | specify the @option{-fno-builtin} option. (@pxref{C Dialect Options}) | |
4415 | Many of these functions are only optimized in certain cases; if they are | |
01702459 JM |
4416 | not optimized in a particular case, a call to the library function will |
4417 | be emitted. | |
4418 | ||
84330467 JM |
4419 | @opindex ansi |
4420 | @opindex std | |
796cdb65 JM |
4421 | The functions @code{abort}, @code{exit}, @code{_Exit} and @code{_exit} |
4422 | are recognized and presumed not to return, but otherwise are not built | |
84330467 JM |
4423 | in. @code{_exit} is not recognized in strict ISO C mode (@option{-ansi}, |
4424 | @option{-std=c89} or @option{-std=c99}). @code{_Exit} is not recognized in | |
4425 | strict C89 mode (@option{-ansi} or @option{-std=c89}). | |
01702459 JM |
4426 | |
4427 | Outside strict ISO C mode, the functions @code{alloca}, @code{bcmp}, | |
b4c984fb KG |
4428 | @code{bzero}, @code{index}, @code{rindex}, @code{ffs}, @code{fputs_unlocked}, |
4429 | @code{printf_unlocked} and @code{fprintf_unlocked} may be handled as | |
4430 | built-in functions. All these functions have corresponding versions | |
9c34dbbf ZW |
4431 | prefixed with @code{__builtin_}, which may be used even in strict C89 |
4432 | mode. | |
01702459 | 4433 | |
341e3d11 JM |
4434 | The ISO C99 functions @code{conj}, @code{conjf}, @code{conjl}, |
4435 | @code{creal}, @code{crealf}, @code{creall}, @code{cimag}, @code{cimagf}, | |
9c34dbbf ZW |
4436 | @code{cimagl}, @code{llabs} and @code{imaxabs} are handled as built-in |
4437 | functions except in strict ISO C89 mode. There are also built-in | |
4438 | versions of the ISO C99 functions @code{cosf}, @code{cosl}, | |
4439 | @code{fabsf}, @code{fabsl}, @code{sinf}, @code{sinl}, @code{sqrtf}, and | |
4440 | @code{sqrtl}, that are recognized in any mode since ISO C89 reserves | |
4441 | these names for the purpose to which ISO C99 puts them. All these | |
4442 | functions have corresponding versions prefixed with @code{__builtin_}. | |
4443 | ||
4444 | The ISO C89 functions @code{abs}, @code{cos}, @code{fabs}, | |
18f988a0 KG |
4445 | @code{fprintf}, @code{fputs}, @code{labs}, @code{memcmp}, @code{memcpy}, |
4446 | @code{memset}, @code{printf}, @code{sin}, @code{sqrt}, @code{strcat}, | |
4447 | @code{strchr}, @code{strcmp}, @code{strcpy}, @code{strcspn}, | |
4448 | @code{strlen}, @code{strncat}, @code{strncmp}, @code{strncpy}, | |
9c34dbbf ZW |
4449 | @code{strpbrk}, @code{strrchr}, @code{strspn}, and @code{strstr} are all |
4450 | recognized as built-in functions unless @option{-fno-builtin} is | |
7d14c755 | 4451 | specified (or @option{-fno-builtin-@var{function}} is specified for an |
dc6f4158 AJ |
4452 | individual function). All of these functions have corresponding |
4453 | versions prefixed with @code{__builtin_}. | |
9c34dbbf ZW |
4454 | |
4455 | GCC provides built-in versions of the ISO C99 floating point comparison | |
4456 | macros that avoid raising exceptions for unordered operands. They have | |
4457 | the same names as the standard macros ( @code{isgreater}, | |
4458 | @code{isgreaterequal}, @code{isless}, @code{islessequal}, | |
4459 | @code{islessgreater}, and @code{isunordered}) , with @code{__builtin_} | |
4460 | prefixed. We intend for a library implementor to be able to simply | |
4461 | @code{#define} each standard macro to its built-in equivalent. | |
185ebd6c | 4462 | |
ecbcf7b3 AH |
4463 | @deftypefn {Built-in Function} int __builtin_types_compatible_p (@var{type1}, @var{type2}) |
4464 | ||
4465 | You can use the built-in function @code{__builtin_types_compatible_p} to | |
4466 | determine whether two types are the same. | |
4467 | ||
4468 | This built-in function returns 1 if the unqualified versions of the | |
4469 | types @var{type1} and @var{type2} (which are types, not expressions) are | |
4470 | compatible, 0 otherwise. The result of this built-in function can be | |
4471 | used in integer constant expressions. | |
4472 | ||
4473 | This built-in function ignores top level qualifiers (e.g., @code{const}, | |
4474 | @code{volatile}). For example, @code{int} is equivalent to @code{const | |
4475 | int}. | |
4476 | ||
4477 | The type @code{int[]} and @code{int[5]} are compatible. On the other | |
4478 | hand, @code{int} and @code{char *} are not compatible, even if the size | |
4479 | of their types, on the particular architecture are the same. Also, the | |
4480 | amount of pointer indirection is taken into account when determining | |
4481 | similarity. Consequently, @code{short *} is not similar to | |
4482 | @code{short **}. Furthermore, two types that are typedefed are | |
4483 | considered compatible if their underlying types are compatible. | |
4484 | ||
4485 | An @code{enum} type is considered to be compatible with another | |
4486 | @code{enum} type. For example, @code{enum @{foo, bar@}} is similar to | |
4487 | @code{enum @{hot, dog@}}. | |
4488 | ||
4489 | You would typically use this function in code whose execution varies | |
4490 | depending on the arguments' types. For example: | |
4491 | ||
4492 | @smallexample | |
6e5bb5ad JM |
4493 | #define foo(x) \ |
4494 | (@{ \ | |
4495 | typeof (x) tmp; \ | |
4496 | if (__builtin_types_compatible_p (typeof (x), long double)) \ | |
4497 | tmp = foo_long_double (tmp); \ | |
4498 | else if (__builtin_types_compatible_p (typeof (x), double)) \ | |
4499 | tmp = foo_double (tmp); \ | |
4500 | else if (__builtin_types_compatible_p (typeof (x), float)) \ | |
4501 | tmp = foo_float (tmp); \ | |
4502 | else \ | |
4503 | abort (); \ | |
4504 | tmp; \ | |
ecbcf7b3 AH |
4505 | @}) |
4506 | @end smallexample | |
4507 | ||
4508 | @emph{Note:} This construct is only available for C. | |
4509 | ||
4510 | @end deftypefn | |
4511 | ||
4512 | @deftypefn {Built-in Function} @var{type} __builtin_choose_expr (@var{const_exp}, @var{exp1}, @var{exp2}) | |
4513 | ||
4514 | You can use the built-in function @code{__builtin_choose_expr} to | |
4515 | evaluate code depending on the value of a constant expression. This | |
4516 | built-in function returns @var{exp1} if @var{const_exp}, which is a | |
4517 | constant expression that must be able to be determined at compile time, | |
4518 | is nonzero. Otherwise it returns 0. | |
4519 | ||
4520 | This built-in function is analogous to the @samp{? :} operator in C, | |
4521 | except that the expression returned has its type unaltered by promotion | |
4522 | rules. Also, the built-in function does not evaluate the expression | |
4523 | that was not chosen. For example, if @var{const_exp} evaluates to true, | |
4524 | @var{exp2} is not evaluated even if it has side-effects. | |
4525 | ||
4526 | This built-in function can return an lvalue if the chosen argument is an | |
4527 | lvalue. | |
4528 | ||
4529 | If @var{exp1} is returned, the return type is the same as @var{exp1}'s | |
4530 | type. Similarly, if @var{exp2} is returned, its return type is the same | |
4531 | as @var{exp2}. | |
4532 | ||
4533 | Example: | |
4534 | ||
4535 | @smallexample | |
4536 | #define foo(x) \ | |
4537 | __builtin_choose_expr (__builtin_types_compatible_p (typeof (x), double), \ | |
4538 | foo_double (x), \ | |
4539 | __builtin_choose_expr (__builtin_types_compatible_p (typeof (x), float), \ | |
4540 | foo_float (x), \ | |
4541 | /* @r{The void expression results in a compile-time error} \ | |
4542 | @r{when assigning the result to something.} */ \ | |
4543 | (void)0)) | |
4544 | @end smallexample | |
4545 | ||
4546 | @emph{Note:} This construct is only available for C. Furthermore, the | |
4547 | unused expression (@var{exp1} or @var{exp2} depending on the value of | |
4548 | @var{const_exp}) may still generate syntax errors. This may change in | |
4549 | future revisions. | |
4550 | ||
4551 | @end deftypefn | |
4552 | ||
84330467 JM |
4553 | @deftypefn {Built-in Function} int __builtin_constant_p (@var{exp}) |
4554 | You can use the built-in function @code{__builtin_constant_p} to | |
185ebd6c | 4555 | determine if a value is known to be constant at compile-time and hence |
f0523f02 | 4556 | that GCC can perform constant-folding on expressions involving that |
185ebd6c RH |
4557 | value. The argument of the function is the value to test. The function |
4558 | returns the integer 1 if the argument is known to be a compile-time | |
4559 | constant and 0 if it is not known to be a compile-time constant. A | |
4560 | return of 0 does not indicate that the value is @emph{not} a constant, | |
f0523f02 | 4561 | but merely that GCC cannot prove it is a constant with the specified |
84330467 | 4562 | value of the @option{-O} option. |
185ebd6c RH |
4563 | |
4564 | You would typically use this function in an embedded application where | |
4565 | memory was a critical resource. If you have some complex calculation, | |
4566 | you may want it to be folded if it involves constants, but need to call | |
4567 | a function if it does not. For example: | |
4568 | ||
4d390518 | 4569 | @smallexample |
310668e8 JM |
4570 | #define Scale_Value(X) \ |
4571 | (__builtin_constant_p (X) \ | |
4572 | ? ((X) * SCALE + OFFSET) : Scale (X)) | |
185ebd6c RH |
4573 | @end smallexample |
4574 | ||
84330467 | 4575 | You may use this built-in function in either a macro or an inline |
185ebd6c | 4576 | function. However, if you use it in an inlined function and pass an |
f0523f02 | 4577 | argument of the function as the argument to the built-in, GCC will |
185ebd6c | 4578 | never return 1 when you call the inline function with a string constant |
4b404517 | 4579 | or compound literal (@pxref{Compound Literals}) and will not return 1 |
185ebd6c | 4580 | when you pass a constant numeric value to the inline function unless you |
84330467 | 4581 | specify the @option{-O} option. |
13104975 ZW |
4582 | |
4583 | You may also use @code{__builtin_constant_p} in initializers for static | |
4584 | data. For instance, you can write | |
4585 | ||
4586 | @smallexample | |
79323c50 | 4587 | static const int table[] = @{ |
13104975 ZW |
4588 | __builtin_constant_p (EXPRESSION) ? (EXPRESSION) : -1, |
4589 | /* ... */ | |
79323c50 | 4590 | @}; |
13104975 ZW |
4591 | @end smallexample |
4592 | ||
4593 | @noindent | |
4594 | This is an acceptable initializer even if @var{EXPRESSION} is not a | |
4595 | constant expression. GCC must be more conservative about evaluating the | |
4596 | built-in in this case, because it has no opportunity to perform | |
4597 | optimization. | |
4598 | ||
4599 | Previous versions of GCC did not accept this built-in in data | |
4600 | initializers. The earliest version where it is completely safe is | |
4601 | 3.0.1. | |
84330467 | 4602 | @end deftypefn |
185ebd6c | 4603 | |
84330467 JM |
4604 | @deftypefn {Built-in Function} long __builtin_expect (long @var{exp}, long @var{c}) |
4605 | @opindex fprofile-arcs | |
02f52e19 | 4606 | You may use @code{__builtin_expect} to provide the compiler with |
994a57cd | 4607 | branch prediction information. In general, you should prefer to |
84330467 | 4608 | use actual profile feedback for this (@option{-fprofile-arcs}), as |
994a57cd | 4609 | programmers are notoriously bad at predicting how their programs |
60b6e1f5 | 4610 | actually perform. However, there are applications in which this |
994a57cd RH |
4611 | data is hard to collect. |
4612 | ||
4613 | The return value is the value of @var{exp}, which should be an | |
4614 | integral expression. The value of @var{c} must be a compile-time | |
84330467 | 4615 | constant. The semantics of the built-in are that it is expected |
994a57cd RH |
4616 | that @var{exp} == @var{c}. For example: |
4617 | ||
4618 | @smallexample | |
4619 | if (__builtin_expect (x, 0)) | |
4620 | foo (); | |
4621 | @end smallexample | |
4622 | ||
4623 | @noindent | |
4624 | would indicate that we do not expect to call @code{foo}, since | |
4625 | we expect @code{x} to be zero. Since you are limited to integral | |
4626 | expressions for @var{exp}, you should use constructions such as | |
4627 | ||
4628 | @smallexample | |
4629 | if (__builtin_expect (ptr != NULL, 1)) | |
4630 | error (); | |
4631 | @end smallexample | |
4632 | ||
4633 | @noindent | |
4634 | when testing pointer or floating-point values. | |
84330467 | 4635 | @end deftypefn |
994a57cd | 4636 | |
3bca17dd | 4637 | @deftypefn {Built-in Function} void __builtin_prefetch (const void *@var{addr}, ...) |
a9ccbb60 JJ |
4638 | This function is used to minimize cache-miss latency by moving data into |
4639 | a cache before it is accessed. | |
4640 | You can insert calls to @code{__builtin_prefetch} into code for which | |
4641 | you know addresses of data in memory that is likely to be accessed soon. | |
4642 | If the target supports them, data prefetch instructions will be generated. | |
4643 | If the prefetch is done early enough before the access then the data will | |
4644 | be in the cache by the time it is accessed. | |
4645 | ||
4646 | The value of @var{addr} is the address of the memory to prefetch. | |
e83d297b | 4647 | There are two optional arguments, @var{rw} and @var{locality}. |
a9ccbb60 | 4648 | The value of @var{rw} is a compile-time constant one or zero; one |
e83d297b JJ |
4649 | means that the prefetch is preparing for a write to the memory address |
4650 | and zero, the default, means that the prefetch is preparing for a read. | |
a9ccbb60 JJ |
4651 | The value @var{locality} must be a compile-time constant integer between |
4652 | zero and three. A value of zero means that the data has no temporal | |
4653 | locality, so it need not be left in the cache after the access. A value | |
4654 | of three means that the data has a high degree of temporal locality and | |
4655 | should be left in all levels of cache possible. Values of one and two | |
e83d297b JJ |
4656 | mean, respectively, a low or moderate degree of temporal locality. The |
4657 | default is three. | |
a9ccbb60 JJ |
4658 | |
4659 | @smallexample | |
4660 | for (i = 0; i < n; i++) | |
4661 | @{ | |
4662 | a[i] = a[i] + b[i]; | |
4663 | __builtin_prefetch (&a[i+j], 1, 1); | |
4664 | __builtin_prefetch (&b[i+j], 0, 1); | |
4665 | /* ... */ | |
4666 | @} | |
4667 | @end smallexample | |
4668 | ||
f282ffb3 | 4669 | Data prefetch does not generate faults if @var{addr} is invalid, but |
a9ccbb60 JJ |
4670 | the address expression itself must be valid. For example, a prefetch |
4671 | of @code{p->next} will not fault if @code{p->next} is not a valid | |
4672 | address, but evaluation will fault if @code{p} is not a valid address. | |
4673 | ||
4674 | If the target does not support data prefetch, the address expression | |
4675 | is evaluated if it includes side effects but no other code is generated | |
4676 | and GCC does not issue a warning. | |
4677 | @end deftypefn | |
4678 | ||
0975678f JM |
4679 | @node Target Builtins |
4680 | @section Built-in Functions Specific to Particular Target Machines | |
4681 | ||
4682 | On some target machines, GCC supports many built-in functions specific | |
4683 | to those machines. Generally these generate calls to specific machine | |
4684 | instructions, but allow the compiler to schedule those calls. | |
4685 | ||
4686 | @menu | |
4687 | * X86 Built-in Functions:: | |
333c8841 | 4688 | * PowerPC AltiVec Built-in Functions:: |
0975678f JM |
4689 | @end menu |
4690 | ||
4691 | @node X86 Built-in Functions | |
4692 | @subsection X86 Built-in Functions | |
4693 | ||
4694 | These built-in functions are available for the i386 and x86-64 family | |
4695 | of computers, depending on the command-line switches used. | |
4696 | ||
4697 | The following machine modes are available for use with MMX built-in functions | |
333c8841 AH |
4698 | (@pxref{Vector Extensions}): @code{V2SI} for a vector of two 32-bit integers, |
4699 | @code{V4HI} for a vector of four 16-bit integers, and @code{V8QI} for a | |
4700 | vector of eight 8-bit integers. Some of the built-in functions operate on | |
4701 | MMX registers as a whole 64-bit entity, these use @code{DI} as their mode. | |
0975678f JM |
4702 | |
4703 | If 3Dnow extensions are enabled, @code{V2SF} is used as a mode for a vector | |
333c8841 | 4704 | of two 32-bit floating point values. |
0975678f | 4705 | |
333c8841 AH |
4706 | If SSE extensions are enabled, @code{V4SF} is used for a vector of four 32-bit |
4707 | floating point values. Some instructions use a vector of four 32-bit | |
0975678f | 4708 | integers, these use @code{V4SI}. Finally, some instructions operate on an |
333c8841 | 4709 | entire vector register, interpreting it as a 128-bit integer, these use mode |
0975678f JM |
4710 | @code{TI}. |
4711 | ||
4712 | The following built-in functions are made available by @option{-mmmx}. | |
4713 | All of them generate the machine instruction that is part of the name. | |
4714 | ||
4715 | @example | |
4716 | v8qi __builtin_ia32_paddb (v8qi, v8qi) | |
4717 | v4hi __builtin_ia32_paddw (v4hi, v4hi) | |
4718 | v2si __builtin_ia32_paddd (v2si, v2si) | |
4719 | v8qi __builtin_ia32_psubb (v8qi, v8qi) | |
4720 | v4hi __builtin_ia32_psubw (v4hi, v4hi) | |
4721 | v2si __builtin_ia32_psubd (v2si, v2si) | |
4722 | v8qi __builtin_ia32_paddsb (v8qi, v8qi) | |
4723 | v4hi __builtin_ia32_paddsw (v4hi, v4hi) | |
4724 | v8qi __builtin_ia32_psubsb (v8qi, v8qi) | |
4725 | v4hi __builtin_ia32_psubsw (v4hi, v4hi) | |
4726 | v8qi __builtin_ia32_paddusb (v8qi, v8qi) | |
4727 | v4hi __builtin_ia32_paddusw (v4hi, v4hi) | |
4728 | v8qi __builtin_ia32_psubusb (v8qi, v8qi) | |
4729 | v4hi __builtin_ia32_psubusw (v4hi, v4hi) | |
4730 | v4hi __builtin_ia32_pmullw (v4hi, v4hi) | |
4731 | v4hi __builtin_ia32_pmulhw (v4hi, v4hi) | |
4732 | di __builtin_ia32_pand (di, di) | |
4733 | di __builtin_ia32_pandn (di,di) | |
4734 | di __builtin_ia32_por (di, di) | |
4735 | di __builtin_ia32_pxor (di, di) | |
4736 | v8qi __builtin_ia32_pcmpeqb (v8qi, v8qi) | |
4737 | v4hi __builtin_ia32_pcmpeqw (v4hi, v4hi) | |
4738 | v2si __builtin_ia32_pcmpeqd (v2si, v2si) | |
4739 | v8qi __builtin_ia32_pcmpgtb (v8qi, v8qi) | |
4740 | v4hi __builtin_ia32_pcmpgtw (v4hi, v4hi) | |
4741 | v2si __builtin_ia32_pcmpgtd (v2si, v2si) | |
4742 | v8qi __builtin_ia32_punpckhbw (v8qi, v8qi) | |
4743 | v4hi __builtin_ia32_punpckhwd (v4hi, v4hi) | |
4744 | v2si __builtin_ia32_punpckhdq (v2si, v2si) | |
4745 | v8qi __builtin_ia32_punpcklbw (v8qi, v8qi) | |
4746 | v4hi __builtin_ia32_punpcklwd (v4hi, v4hi) | |
4747 | v2si __builtin_ia32_punpckldq (v2si, v2si) | |
4748 | v8qi __builtin_ia32_packsswb (v4hi, v4hi) | |
4749 | v4hi __builtin_ia32_packssdw (v2si, v2si) | |
4750 | v8qi __builtin_ia32_packuswb (v4hi, v4hi) | |
4751 | @end example | |
4752 | ||
4753 | The following built-in functions are made available either with | |
4754 | @option{-msse}, or with a combination of @option{-m3dnow} and | |
4755 | @option{-march=athlon}. All of them generate the machine | |
4756 | instruction that is part of the name. | |
4757 | ||
4758 | @example | |
4759 | v4hi __builtin_ia32_pmulhuw (v4hi, v4hi) | |
4760 | v8qi __builtin_ia32_pavgb (v8qi, v8qi) | |
4761 | v4hi __builtin_ia32_pavgw (v4hi, v4hi) | |
4762 | v4hi __builtin_ia32_psadbw (v8qi, v8qi) | |
4763 | v8qi __builtin_ia32_pmaxub (v8qi, v8qi) | |
4764 | v4hi __builtin_ia32_pmaxsw (v4hi, v4hi) | |
4765 | v8qi __builtin_ia32_pminub (v8qi, v8qi) | |
4766 | v4hi __builtin_ia32_pminsw (v4hi, v4hi) | |
4767 | int __builtin_ia32_pextrw (v4hi, int) | |
4768 | v4hi __builtin_ia32_pinsrw (v4hi, int, int) | |
4769 | int __builtin_ia32_pmovmskb (v8qi) | |
4770 | void __builtin_ia32_maskmovq (v8qi, v8qi, char *) | |
4771 | void __builtin_ia32_movntq (di *, di) | |
4772 | void __builtin_ia32_sfence (void) | |
4773 | @end example | |
4774 | ||
4775 | The following built-in functions are available when @option{-msse} is used. | |
4776 | All of them generate the machine instruction that is part of the name. | |
4777 | ||
4778 | @example | |
4779 | int __builtin_ia32_comieq (v4sf, v4sf) | |
4780 | int __builtin_ia32_comineq (v4sf, v4sf) | |
4781 | int __builtin_ia32_comilt (v4sf, v4sf) | |
4782 | int __builtin_ia32_comile (v4sf, v4sf) | |
4783 | int __builtin_ia32_comigt (v4sf, v4sf) | |
4784 | int __builtin_ia32_comige (v4sf, v4sf) | |
4785 | int __builtin_ia32_ucomieq (v4sf, v4sf) | |
4786 | int __builtin_ia32_ucomineq (v4sf, v4sf) | |
4787 | int __builtin_ia32_ucomilt (v4sf, v4sf) | |
4788 | int __builtin_ia32_ucomile (v4sf, v4sf) | |
4789 | int __builtin_ia32_ucomigt (v4sf, v4sf) | |
4790 | int __builtin_ia32_ucomige (v4sf, v4sf) | |
4791 | v4sf __builtin_ia32_addps (v4sf, v4sf) | |
4792 | v4sf __builtin_ia32_subps (v4sf, v4sf) | |
4793 | v4sf __builtin_ia32_mulps (v4sf, v4sf) | |
4794 | v4sf __builtin_ia32_divps (v4sf, v4sf) | |
4795 | v4sf __builtin_ia32_addss (v4sf, v4sf) | |
4796 | v4sf __builtin_ia32_subss (v4sf, v4sf) | |
4797 | v4sf __builtin_ia32_mulss (v4sf, v4sf) | |
4798 | v4sf __builtin_ia32_divss (v4sf, v4sf) | |
4799 | v4si __builtin_ia32_cmpeqps (v4sf, v4sf) | |
4800 | v4si __builtin_ia32_cmpltps (v4sf, v4sf) | |
4801 | v4si __builtin_ia32_cmpleps (v4sf, v4sf) | |
4802 | v4si __builtin_ia32_cmpgtps (v4sf, v4sf) | |
4803 | v4si __builtin_ia32_cmpgeps (v4sf, v4sf) | |
4804 | v4si __builtin_ia32_cmpunordps (v4sf, v4sf) | |
4805 | v4si __builtin_ia32_cmpneqps (v4sf, v4sf) | |
4806 | v4si __builtin_ia32_cmpnltps (v4sf, v4sf) | |
4807 | v4si __builtin_ia32_cmpnleps (v4sf, v4sf) | |
4808 | v4si __builtin_ia32_cmpngtps (v4sf, v4sf) | |
4809 | v4si __builtin_ia32_cmpngeps (v4sf, v4sf) | |
4810 | v4si __builtin_ia32_cmpordps (v4sf, v4sf) | |
4811 | v4si __builtin_ia32_cmpeqss (v4sf, v4sf) | |
4812 | v4si __builtin_ia32_cmpltss (v4sf, v4sf) | |
4813 | v4si __builtin_ia32_cmpless (v4sf, v4sf) | |
4814 | v4si __builtin_ia32_cmpgtss (v4sf, v4sf) | |
4815 | v4si __builtin_ia32_cmpgess (v4sf, v4sf) | |
4816 | v4si __builtin_ia32_cmpunordss (v4sf, v4sf) | |
4817 | v4si __builtin_ia32_cmpneqss (v4sf, v4sf) | |
4818 | v4si __builtin_ia32_cmpnlts (v4sf, v4sf) | |
4819 | v4si __builtin_ia32_cmpnless (v4sf, v4sf) | |
4820 | v4si __builtin_ia32_cmpngtss (v4sf, v4sf) | |
4821 | v4si __builtin_ia32_cmpngess (v4sf, v4sf) | |
4822 | v4si __builtin_ia32_cmpordss (v4sf, v4sf) | |
4823 | v4sf __builtin_ia32_maxps (v4sf, v4sf) | |
4824 | v4sf __builtin_ia32_maxss (v4sf, v4sf) | |
4825 | v4sf __builtin_ia32_minps (v4sf, v4sf) | |
4826 | v4sf __builtin_ia32_minss (v4sf, v4sf) | |
4827 | v4sf __builtin_ia32_andps (v4sf, v4sf) | |
4828 | v4sf __builtin_ia32_andnps (v4sf, v4sf) | |
4829 | v4sf __builtin_ia32_orps (v4sf, v4sf) | |
4830 | v4sf __builtin_ia32_xorps (v4sf, v4sf) | |
4831 | v4sf __builtin_ia32_movss (v4sf, v4sf) | |
4832 | v4sf __builtin_ia32_movhlps (v4sf, v4sf) | |
4833 | v4sf __builtin_ia32_movlhps (v4sf, v4sf) | |
4834 | v4sf __builtin_ia32_unpckhps (v4sf, v4sf) | |
4835 | v4sf __builtin_ia32_unpcklps (v4sf, v4sf) | |
4836 | v4sf __builtin_ia32_cvtpi2ps (v4sf, v2si) | |
4837 | v4sf __builtin_ia32_cvtsi2ss (v4sf, int) | |
4838 | v2si __builtin_ia32_cvtps2pi (v4sf) | |
4839 | int __builtin_ia32_cvtss2si (v4sf) | |
4840 | v2si __builtin_ia32_cvttps2pi (v4sf) | |
4841 | int __builtin_ia32_cvttss2si (v4sf) | |
4842 | v4sf __builtin_ia32_rcpps (v4sf) | |
4843 | v4sf __builtin_ia32_rsqrtps (v4sf) | |
4844 | v4sf __builtin_ia32_sqrtps (v4sf) | |
4845 | v4sf __builtin_ia32_rcpss (v4sf) | |
4846 | v4sf __builtin_ia32_rsqrtss (v4sf) | |
4847 | v4sf __builtin_ia32_sqrtss (v4sf) | |
4848 | v4sf __builtin_ia32_shufps (v4sf, v4sf, int) | |
4849 | void __builtin_ia32_movntps (float *, v4sf) | |
4850 | int __builtin_ia32_movmskps (v4sf) | |
4851 | @end example | |
4852 | ||
4853 | The following built-in functions are available when @option{-msse} is used. | |
4854 | ||
4855 | @table @code | |
4856 | @item v4sf __builtin_ia32_loadaps (float *) | |
4857 | Generates the @code{movaps} machine instruction as a load from memory. | |
4858 | @item void __builtin_ia32_storeaps (float *, v4sf) | |
4859 | Generates the @code{movaps} machine instruction as a store to memory. | |
4860 | @item v4sf __builtin_ia32_loadups (float *) | |
4861 | Generates the @code{movups} machine instruction as a load from memory. | |
4862 | @item void __builtin_ia32_storeups (float *, v4sf) | |
4863 | Generates the @code{movups} machine instruction as a store to memory. | |
4864 | @item v4sf __builtin_ia32_loadsss (float *) | |
4865 | Generates the @code{movss} machine instruction as a load from memory. | |
4866 | @item void __builtin_ia32_storess (float *, v4sf) | |
4867 | Generates the @code{movss} machine instruction as a store to memory. | |
4868 | @item v4sf __builtin_ia32_loadhps (v4sf, v2si *) | |
4869 | Generates the @code{movhps} machine instruction as a load from memory. | |
4870 | @item v4sf __builtin_ia32_loadlps (v4sf, v2si *) | |
4871 | Generates the @code{movlps} machine instruction as a load from memory | |
4872 | @item void __builtin_ia32_storehps (v4sf, v2si *) | |
4873 | Generates the @code{movhps} machine instruction as a store to memory. | |
4874 | @item void __builtin_ia32_storelps (v4sf, v2si *) | |
4875 | Generates the @code{movlps} machine instruction as a store to memory. | |
4876 | @end table | |
4877 | ||
4878 | The following built-in functions are available when @option{-m3dnow} is used. | |
4879 | All of them generate the machine instruction that is part of the name. | |
4880 | ||
4881 | @example | |
4882 | void __builtin_ia32_femms (void) | |
4883 | v8qi __builtin_ia32_pavgusb (v8qi, v8qi) | |
4884 | v2si __builtin_ia32_pf2id (v2sf) | |
4885 | v2sf __builtin_ia32_pfacc (v2sf, v2sf) | |
4886 | v2sf __builtin_ia32_pfadd (v2sf, v2sf) | |
4887 | v2si __builtin_ia32_pfcmpeq (v2sf, v2sf) | |
4888 | v2si __builtin_ia32_pfcmpge (v2sf, v2sf) | |
4889 | v2si __builtin_ia32_pfcmpgt (v2sf, v2sf) | |
4890 | v2sf __builtin_ia32_pfmax (v2sf, v2sf) | |
4891 | v2sf __builtin_ia32_pfmin (v2sf, v2sf) | |
4892 | v2sf __builtin_ia32_pfmul (v2sf, v2sf) | |
4893 | v2sf __builtin_ia32_pfrcp (v2sf) | |
4894 | v2sf __builtin_ia32_pfrcpit1 (v2sf, v2sf) | |
4895 | v2sf __builtin_ia32_pfrcpit2 (v2sf, v2sf) | |
4896 | v2sf __builtin_ia32_pfrsqrt (v2sf) | |
4897 | v2sf __builtin_ia32_pfrsqrtit1 (v2sf, v2sf) | |
4898 | v2sf __builtin_ia32_pfsub (v2sf, v2sf) | |
4899 | v2sf __builtin_ia32_pfsubr (v2sf, v2sf) | |
4900 | v2sf __builtin_ia32_pi2fd (v2si) | |
4901 | v4hi __builtin_ia32_pmulhrw (v4hi, v4hi) | |
4902 | @end example | |
4903 | ||
4904 | The following built-in functions are available when both @option{-m3dnow} | |
4905 | and @option{-march=athlon} are used. All of them generate the machine | |
4906 | instruction that is part of the name. | |
4907 | ||
4908 | @example | |
4909 | v2si __builtin_ia32_pf2iw (v2sf) | |
4910 | v2sf __builtin_ia32_pfnacc (v2sf, v2sf) | |
4911 | v2sf __builtin_ia32_pfpnacc (v2sf, v2sf) | |
4912 | v2sf __builtin_ia32_pi2fw (v2si) | |
4913 | v2sf __builtin_ia32_pswapdsf (v2sf) | |
4914 | v2si __builtin_ia32_pswapdsi (v2si) | |
4915 | @end example | |
4916 | ||
333c8841 AH |
4917 | @node PowerPC AltiVec Built-in Functions |
4918 | @subsection PowerPC AltiVec Built-in Functions | |
4919 | ||
4920 | These built-in functions are available for the PowerPC family | |
4921 | of computers, depending on the command-line switches used. | |
4922 | ||
4923 | The following machine modes are available for use with AltiVec built-in | |
4924 | functions (@pxref{Vector Extensions}): @code{V4SI} for a vector of four | |
4925 | 32-bit integers, @code{V4SF} for a vector of four 32-bit floating point | |
4926 | numbers, @code{V8HI} for a vector of eight 16-bit integers, and | |
4927 | @code{V16QI} for a vector of sixteen 8-bit integers. | |
4928 | ||
4929 | The following functions are made available by including | |
4930 | @code{<altivec.h>} and using @option{-maltivec} and | |
4931 | @option{-mabi=altivec}. The functions implement the functionality | |
4932 | described in Motorola's AltiVec Programming Interface Manual. | |
4933 | ||
ae4b4a02 AH |
4934 | @emph{Note:} Only the @code{<altivec.h>} interface is supported. |
4935 | Internally, GCC uses built-in functions to achieve the functionality in | |
4936 | the aforementioned header file, but they are not supported and are | |
4937 | subject to change without notice. | |
4938 | ||
333c8841 AH |
4939 | @smallexample |
4940 | vector signed char vec_abs (vector signed char, vector signed char); | |
4941 | vector signed short vec_abs (vector signed short, vector signed short); | |
4942 | vector signed int vec_abs (vector signed int, vector signed int); | |
4943 | vector signed float vec_abs (vector signed float, vector signed float); | |
4944 | ||
4945 | vector signed char vec_abss (vector signed char, vector signed char); | |
4946 | vector signed short vec_abss (vector signed short, vector signed short); | |
4947 | ||
4948 | vector signed char vec_add (vector signed char, vector signed char); | |
4949 | vector unsigned char vec_add (vector signed char, vector unsigned char); | |
4950 | ||
4951 | vector unsigned char vec_add (vector unsigned char, vector signed char); | |
4952 | ||
924fcc4e JM |
4953 | vector unsigned char vec_add (vector unsigned char, |
4954 | vector unsigned char); | |
333c8841 | 4955 | vector signed short vec_add (vector signed short, vector signed short); |
924fcc4e JM |
4956 | vector unsigned short vec_add (vector signed short, |
4957 | vector unsigned short); | |
4958 | vector unsigned short vec_add (vector unsigned short, | |
4959 | vector signed short); | |
6e5bb5ad JM |
4960 | vector unsigned short vec_add (vector unsigned short, |
4961 | vector unsigned short); | |
333c8841 AH |
4962 | vector signed int vec_add (vector signed int, vector signed int); |
4963 | vector unsigned int vec_add (vector signed int, vector unsigned int); | |
4964 | vector unsigned int vec_add (vector unsigned int, vector signed int); | |
4965 | vector unsigned int vec_add (vector unsigned int, vector unsigned int); | |
4966 | vector float vec_add (vector float, vector float); | |
4967 | ||
4968 | vector unsigned int vec_addc (vector unsigned int, vector unsigned int); | |
4969 | ||
924fcc4e JM |
4970 | vector unsigned char vec_adds (vector signed char, |
4971 | vector unsigned char); | |
4972 | vector unsigned char vec_adds (vector unsigned char, | |
4973 | vector signed char); | |
4974 | vector unsigned char vec_adds (vector unsigned char, | |
4975 | vector unsigned char); | |
333c8841 | 4976 | vector signed char vec_adds (vector signed char, vector signed char); |
924fcc4e JM |
4977 | vector unsigned short vec_adds (vector signed short, |
4978 | vector unsigned short); | |
4979 | vector unsigned short vec_adds (vector unsigned short, | |
4980 | vector signed short); | |
6e5bb5ad JM |
4981 | vector unsigned short vec_adds (vector unsigned short, |
4982 | vector unsigned short); | |
333c8841 AH |
4983 | vector signed short vec_adds (vector signed short, vector signed short); |
4984 | ||
4985 | vector unsigned int vec_adds (vector signed int, vector unsigned int); | |
4986 | vector unsigned int vec_adds (vector unsigned int, vector signed int); | |
4987 | vector unsigned int vec_adds (vector unsigned int, vector unsigned int); | |
4988 | ||
4989 | vector signed int vec_adds (vector signed int, vector signed int); | |
4990 | ||
4991 | vector float vec_and (vector float, vector float); | |
4992 | vector float vec_and (vector float, vector signed int); | |
4993 | vector float vec_and (vector signed int, vector float); | |
4994 | vector signed int vec_and (vector signed int, vector signed int); | |
4995 | vector unsigned int vec_and (vector signed int, vector unsigned int); | |
4996 | vector unsigned int vec_and (vector unsigned int, vector signed int); | |
4997 | vector unsigned int vec_and (vector unsigned int, vector unsigned int); | |
4998 | vector signed short vec_and (vector signed short, vector signed short); | |
924fcc4e JM |
4999 | vector unsigned short vec_and (vector signed short, |
5000 | vector unsigned short); | |
5001 | vector unsigned short vec_and (vector unsigned short, | |
5002 | vector signed short); | |
6e5bb5ad JM |
5003 | vector unsigned short vec_and (vector unsigned short, |
5004 | vector unsigned short); | |
333c8841 AH |
5005 | vector signed char vec_and (vector signed char, vector signed char); |
5006 | vector unsigned char vec_and (vector signed char, vector unsigned char); | |
5007 | ||
5008 | vector unsigned char vec_and (vector unsigned char, vector signed char); | |
5009 | ||
924fcc4e JM |
5010 | vector unsigned char vec_and (vector unsigned char, |
5011 | vector unsigned char); | |
333c8841 AH |
5012 | |
5013 | vector float vec_andc (vector float, vector float); | |
5014 | vector float vec_andc (vector float, vector signed int); | |
5015 | vector float vec_andc (vector signed int, vector float); | |
5016 | vector signed int vec_andc (vector signed int, vector signed int); | |
5017 | vector unsigned int vec_andc (vector signed int, vector unsigned int); | |
5018 | vector unsigned int vec_andc (vector unsigned int, vector signed int); | |
5019 | vector unsigned int vec_andc (vector unsigned int, vector unsigned int); | |
5020 | ||
5021 | vector signed short vec_andc (vector signed short, vector signed short); | |
5022 | ||
924fcc4e JM |
5023 | vector unsigned short vec_andc (vector signed short, |
5024 | vector unsigned short); | |
5025 | vector unsigned short vec_andc (vector unsigned short, | |
5026 | vector signed short); | |
6e5bb5ad JM |
5027 | vector unsigned short vec_andc (vector unsigned short, |
5028 | vector unsigned short); | |
333c8841 | 5029 | vector signed char vec_andc (vector signed char, vector signed char); |
924fcc4e JM |
5030 | vector unsigned char vec_andc (vector signed char, |
5031 | vector unsigned char); | |
5032 | vector unsigned char vec_andc (vector unsigned char, | |
5033 | vector signed char); | |
5034 | vector unsigned char vec_andc (vector unsigned char, | |
5035 | vector unsigned char); | |
333c8841 | 5036 | |
924fcc4e JM |
5037 | vector unsigned char vec_avg (vector unsigned char, |
5038 | vector unsigned char); | |
333c8841 | 5039 | vector signed char vec_avg (vector signed char, vector signed char); |
6e5bb5ad JM |
5040 | vector unsigned short vec_avg (vector unsigned short, |
5041 | vector unsigned short); | |
333c8841 AH |
5042 | vector signed short vec_avg (vector signed short, vector signed short); |
5043 | vector unsigned int vec_avg (vector unsigned int, vector unsigned int); | |
5044 | vector signed int vec_avg (vector signed int, vector signed int); | |
5045 | ||
5046 | vector float vec_ceil (vector float); | |
5047 | ||
5048 | vector signed int vec_cmpb (vector float, vector float); | |
5049 | ||
5050 | vector signed char vec_cmpeq (vector signed char, vector signed char); | |
924fcc4e JM |
5051 | vector signed char vec_cmpeq (vector unsigned char, |
5052 | vector unsigned char); | |
5053 | vector signed short vec_cmpeq (vector signed short, | |
5054 | vector signed short); | |
6e5bb5ad JM |
5055 | vector signed short vec_cmpeq (vector unsigned short, |
5056 | vector unsigned short); | |
333c8841 AH |
5057 | vector signed int vec_cmpeq (vector signed int, vector signed int); |
5058 | vector signed int vec_cmpeq (vector unsigned int, vector unsigned int); | |
5059 | vector signed int vec_cmpeq (vector float, vector float); | |
5060 | ||
5061 | vector signed int vec_cmpge (vector float, vector float); | |
5062 | ||
924fcc4e JM |
5063 | vector signed char vec_cmpgt (vector unsigned char, |
5064 | vector unsigned char); | |
333c8841 | 5065 | vector signed char vec_cmpgt (vector signed char, vector signed char); |
6e5bb5ad JM |
5066 | vector signed short vec_cmpgt (vector unsigned short, |
5067 | vector unsigned short); | |
924fcc4e JM |
5068 | vector signed short vec_cmpgt (vector signed short, |
5069 | vector signed short); | |
333c8841 AH |
5070 | vector signed int vec_cmpgt (vector unsigned int, vector unsigned int); |
5071 | vector signed int vec_cmpgt (vector signed int, vector signed int); | |
5072 | vector signed int vec_cmpgt (vector float, vector float); | |
5073 | ||
5074 | vector signed int vec_cmple (vector float, vector float); | |
5075 | ||
924fcc4e JM |
5076 | vector signed char vec_cmplt (vector unsigned char, |
5077 | vector unsigned char); | |
333c8841 | 5078 | vector signed char vec_cmplt (vector signed char, vector signed char); |
6e5bb5ad JM |
5079 | vector signed short vec_cmplt (vector unsigned short, |
5080 | vector unsigned short); | |
924fcc4e JM |
5081 | vector signed short vec_cmplt (vector signed short, |
5082 | vector signed short); | |
333c8841 AH |
5083 | vector signed int vec_cmplt (vector unsigned int, vector unsigned int); |
5084 | vector signed int vec_cmplt (vector signed int, vector signed int); | |
5085 | vector signed int vec_cmplt (vector float, vector float); | |
5086 | ||
5087 | vector float vec_ctf (vector unsigned int, const char); | |
5088 | vector float vec_ctf (vector signed int, const char); | |
5089 | ||
5090 | vector signed int vec_cts (vector float, const char); | |
5091 | ||
5092 | vector unsigned int vec_ctu (vector float, const char); | |
5093 | ||
5094 | void vec_dss (const char); | |
5095 | ||
5096 | void vec_dssall (void); | |
5097 | ||
5098 | void vec_dst (void *, int, const char); | |
5099 | ||
5100 | void vec_dstst (void *, int, const char); | |
5101 | ||
5102 | void vec_dststt (void *, int, const char); | |
5103 | ||
5104 | void vec_dstt (void *, int, const char); | |
5105 | ||
5106 | vector float vec_expte (vector float, vector float); | |
5107 | ||
5108 | vector float vec_floor (vector float, vector float); | |
5109 | ||
5110 | vector float vec_ld (int, vector float *); | |
5111 | vector float vec_ld (int, float *): | |
5112 | vector signed int vec_ld (int, int *); | |
5113 | vector signed int vec_ld (int, vector signed int *); | |
5114 | vector unsigned int vec_ld (int, vector unsigned int *); | |
5115 | vector unsigned int vec_ld (int, unsigned int *); | |
5116 | vector signed short vec_ld (int, short *, vector signed short *); | |
6e5bb5ad JM |
5117 | vector unsigned short vec_ld (int, unsigned short *, |
5118 | vector unsigned short *); | |
333c8841 AH |
5119 | vector signed char vec_ld (int, signed char *); |
5120 | vector signed char vec_ld (int, vector signed char *); | |
5121 | vector unsigned char vec_ld (int, unsigned char *); | |
5122 | vector unsigned char vec_ld (int, vector unsigned char *); | |
5123 | ||
5124 | vector signed char vec_lde (int, signed char *); | |
5125 | vector unsigned char vec_lde (int, unsigned char *); | |
5126 | vector signed short vec_lde (int, short *); | |
5127 | vector unsigned short vec_lde (int, unsigned short *); | |
5128 | vector float vec_lde (int, float *); | |
5129 | vector signed int vec_lde (int, int *); | |
5130 | vector unsigned int vec_lde (int, unsigned int *); | |
5131 | ||
5132 | void float vec_ldl (int, float *); | |
5133 | void float vec_ldl (int, vector float *); | |
5134 | void signed int vec_ldl (int, vector signed int *); | |
5135 | void signed int vec_ldl (int, int *); | |
5136 | void unsigned int vec_ldl (int, unsigned int *); | |
5137 | void unsigned int vec_ldl (int, vector unsigned int *); | |
5138 | void signed short vec_ldl (int, vector signed short *); | |
5139 | void signed short vec_ldl (int, short *); | |
5140 | void unsigned short vec_ldl (int, vector unsigned short *); | |
5141 | void unsigned short vec_ldl (int, unsigned short *); | |
5142 | void signed char vec_ldl (int, vector signed char *); | |
5143 | void signed char vec_ldl (int, signed char *); | |
5144 | void unsigned char vec_ldl (int, vector unsigned char *); | |
5145 | void unsigned char vec_ldl (int, unsigned char *); | |
5146 | ||
5147 | vector float vec_loge (vector float); | |
5148 | ||
5149 | vector unsigned char vec_lvsl (int, void *, int *); | |
5150 | ||
5151 | vector unsigned char vec_lvsr (int, void *, int *); | |
5152 | ||
5153 | vector float vec_madd (vector float, vector float, vector float); | |
5154 | ||
6e5bb5ad JM |
5155 | vector signed short vec_madds (vector signed short, vector signed short, |
5156 | vector signed short); | |
333c8841 AH |
5157 | |
5158 | vector unsigned char vec_max (vector signed char, vector unsigned char); | |
5159 | ||
5160 | vector unsigned char vec_max (vector unsigned char, vector signed char); | |
5161 | ||
924fcc4e JM |
5162 | vector unsigned char vec_max (vector unsigned char, |
5163 | vector unsigned char); | |
333c8841 | 5164 | vector signed char vec_max (vector signed char, vector signed char); |
924fcc4e JM |
5165 | vector unsigned short vec_max (vector signed short, |
5166 | vector unsigned short); | |
5167 | vector unsigned short vec_max (vector unsigned short, | |
5168 | vector signed short); | |
6e5bb5ad JM |
5169 | vector unsigned short vec_max (vector unsigned short, |
5170 | vector unsigned short); | |
333c8841 AH |
5171 | vector signed short vec_max (vector signed short, vector signed short); |
5172 | vector unsigned int vec_max (vector signed int, vector unsigned int); | |
5173 | vector unsigned int vec_max (vector unsigned int, vector signed int); | |
5174 | vector unsigned int vec_max (vector unsigned int, vector unsigned int); | |
5175 | vector signed int vec_max (vector signed int, vector signed int); | |
5176 | vector float vec_max (vector float, vector float); | |
5177 | ||
5178 | vector signed char vec_mergeh (vector signed char, vector signed char); | |
6e5bb5ad JM |
5179 | vector unsigned char vec_mergeh (vector unsigned char, |
5180 | vector unsigned char); | |
924fcc4e JM |
5181 | vector signed short vec_mergeh (vector signed short, |
5182 | vector signed short); | |
6e5bb5ad JM |
5183 | vector unsigned short vec_mergeh (vector unsigned short, |
5184 | vector unsigned short); | |
333c8841 AH |
5185 | vector float vec_mergeh (vector float, vector float); |
5186 | vector signed int vec_mergeh (vector signed int, vector signed int); | |
924fcc4e JM |
5187 | vector unsigned int vec_mergeh (vector unsigned int, |
5188 | vector unsigned int); | |
333c8841 AH |
5189 | |
5190 | vector signed char vec_mergel (vector signed char, vector signed char); | |
6e5bb5ad JM |
5191 | vector unsigned char vec_mergel (vector unsigned char, |
5192 | vector unsigned char); | |
924fcc4e JM |
5193 | vector signed short vec_mergel (vector signed short, |
5194 | vector signed short); | |
6e5bb5ad JM |
5195 | vector unsigned short vec_mergel (vector unsigned short, |
5196 | vector unsigned short); | |
333c8841 AH |
5197 | vector float vec_mergel (vector float, vector float); |
5198 | vector signed int vec_mergel (vector signed int, vector signed int); | |
924fcc4e JM |
5199 | vector unsigned int vec_mergel (vector unsigned int, |
5200 | vector unsigned int); | |
333c8841 AH |
5201 | |
5202 | vector unsigned short vec_mfvscr (void); | |
5203 | ||
5204 | vector unsigned char vec_min (vector signed char, vector unsigned char); | |
5205 | ||
5206 | vector unsigned char vec_min (vector unsigned char, vector signed char); | |
5207 | ||
924fcc4e JM |
5208 | vector unsigned char vec_min (vector unsigned char, |
5209 | vector unsigned char); | |
333c8841 | 5210 | vector signed char vec_min (vector signed char, vector signed char); |
924fcc4e JM |
5211 | vector unsigned short vec_min (vector signed short, |
5212 | vector unsigned short); | |
5213 | vector unsigned short vec_min (vector unsigned short, | |
5214 | vector signed short); | |
6e5bb5ad JM |
5215 | vector unsigned short vec_min (vector unsigned short, |
5216 | vector unsigned short); | |
333c8841 AH |
5217 | vector signed short vec_min (vector signed short, vector signed short); |
5218 | vector unsigned int vec_min (vector signed int, vector unsigned int); | |
5219 | vector unsigned int vec_min (vector unsigned int, vector signed int); | |
5220 | vector unsigned int vec_min (vector unsigned int, vector unsigned int); | |
5221 | vector signed int vec_min (vector signed int, vector signed int); | |
5222 | vector float vec_min (vector float, vector float); | |
5223 | ||
6e5bb5ad JM |
5224 | vector signed short vec_mladd (vector signed short, vector signed short, |
5225 | vector signed short); | |
924fcc4e JM |
5226 | vector signed short vec_mladd (vector signed short, |
5227 | vector unsigned short, | |
6e5bb5ad | 5228 | vector unsigned short); |
924fcc4e JM |
5229 | vector signed short vec_mladd (vector unsigned short, |
5230 | vector signed short, | |
6e5bb5ad JM |
5231 | vector signed short); |
5232 | vector unsigned short vec_mladd (vector unsigned short, | |
5233 | vector unsigned short, | |
5234 | vector unsigned short); | |
5235 | ||
924fcc4e JM |
5236 | vector signed short vec_mradds (vector signed short, |
5237 | vector signed short, | |
6e5bb5ad JM |
5238 | vector signed short); |
5239 | ||
924fcc4e JM |
5240 | vector unsigned int vec_msum (vector unsigned char, |
5241 | vector unsigned char, | |
6e5bb5ad JM |
5242 | vector unsigned int); |
5243 | vector signed int vec_msum (vector signed char, vector unsigned char, | |
5244 | vector signed int); | |
924fcc4e JM |
5245 | vector unsigned int vec_msum (vector unsigned short, |
5246 | vector unsigned short, | |
6e5bb5ad JM |
5247 | vector unsigned int); |
5248 | vector signed int vec_msum (vector signed short, vector signed short, | |
5249 | vector signed int); | |
5250 | ||
5251 | vector unsigned int vec_msums (vector unsigned short, | |
924fcc4e JM |
5252 | vector unsigned short, |
5253 | vector unsigned int); | |
6e5bb5ad JM |
5254 | vector signed int vec_msums (vector signed short, vector signed short, |
5255 | vector signed int); | |
333c8841 AH |
5256 | |
5257 | void vec_mtvscr (vector signed int); | |
5258 | void vec_mtvscr (vector unsigned int); | |
5259 | void vec_mtvscr (vector signed short); | |
5260 | void vec_mtvscr (vector unsigned short); | |
5261 | void vec_mtvscr (vector signed char); | |
5262 | void vec_mtvscr (vector unsigned char); | |
5263 | ||
924fcc4e JM |
5264 | vector unsigned short vec_mule (vector unsigned char, |
5265 | vector unsigned char); | |
333c8841 | 5266 | vector signed short vec_mule (vector signed char, vector signed char); |
924fcc4e JM |
5267 | vector unsigned int vec_mule (vector unsigned short, |
5268 | vector unsigned short); | |
333c8841 AH |
5269 | vector signed int vec_mule (vector signed short, vector signed short); |
5270 | ||
924fcc4e JM |
5271 | vector unsigned short vec_mulo (vector unsigned char, |
5272 | vector unsigned char); | |
333c8841 | 5273 | vector signed short vec_mulo (vector signed char, vector signed char); |
924fcc4e JM |
5274 | vector unsigned int vec_mulo (vector unsigned short, |
5275 | vector unsigned short); | |
333c8841 AH |
5276 | vector signed int vec_mulo (vector signed short, vector signed short); |
5277 | ||
5278 | vector float vec_nmsub (vector float, vector float, vector float); | |
5279 | ||
5280 | vector float vec_nor (vector float, vector float); | |
5281 | vector signed int vec_nor (vector signed int, vector signed int); | |
5282 | vector unsigned int vec_nor (vector unsigned int, vector unsigned int); | |
5283 | vector signed short vec_nor (vector signed short, vector signed short); | |
6e5bb5ad JM |
5284 | vector unsigned short vec_nor (vector unsigned short, |
5285 | vector unsigned short); | |
333c8841 | 5286 | vector signed char vec_nor (vector signed char, vector signed char); |
924fcc4e JM |
5287 | vector unsigned char vec_nor (vector unsigned char, |
5288 | vector unsigned char); | |
333c8841 AH |
5289 | |
5290 | vector float vec_or (vector float, vector float); | |
5291 | vector float vec_or (vector float, vector signed int); | |
5292 | vector float vec_or (vector signed int, vector float); | |
5293 | vector signed int vec_or (vector signed int, vector signed int); | |
5294 | vector unsigned int vec_or (vector signed int, vector unsigned int); | |
5295 | vector unsigned int vec_or (vector unsigned int, vector signed int); | |
5296 | vector unsigned int vec_or (vector unsigned int, vector unsigned int); | |
5297 | vector signed short vec_or (vector signed short, vector signed short); | |
924fcc4e JM |
5298 | vector unsigned short vec_or (vector signed short, |
5299 | vector unsigned short); | |
5300 | vector unsigned short vec_or (vector unsigned short, | |
5301 | vector signed short); | |
5302 | vector unsigned short vec_or (vector unsigned short, | |
5303 | vector unsigned short); | |
333c8841 AH |
5304 | vector signed char vec_or (vector signed char, vector signed char); |
5305 | vector unsigned char vec_or (vector signed char, vector unsigned char); | |
5306 | vector unsigned char vec_or (vector unsigned char, vector signed char); | |
924fcc4e JM |
5307 | vector unsigned char vec_or (vector unsigned char, |
5308 | vector unsigned char); | |
333c8841 AH |
5309 | |
5310 | vector signed char vec_pack (vector signed short, vector signed short); | |
6e5bb5ad JM |
5311 | vector unsigned char vec_pack (vector unsigned short, |
5312 | vector unsigned short); | |
333c8841 | 5313 | vector signed short vec_pack (vector signed int, vector signed int); |
924fcc4e JM |
5314 | vector unsigned short vec_pack (vector unsigned int, |
5315 | vector unsigned int); | |
333c8841 | 5316 | |
924fcc4e JM |
5317 | vector signed short vec_packpx (vector unsigned int, |
5318 | vector unsigned int); | |
333c8841 | 5319 | |
6e5bb5ad JM |
5320 | vector unsigned char vec_packs (vector unsigned short, |
5321 | vector unsigned short); | |
333c8841 AH |
5322 | vector signed char vec_packs (vector signed short, vector signed short); |
5323 | ||
924fcc4e JM |
5324 | vector unsigned short vec_packs (vector unsigned int, |
5325 | vector unsigned int); | |
333c8841 AH |
5326 | vector signed short vec_packs (vector signed int, vector signed int); |
5327 | ||
6e5bb5ad JM |
5328 | vector unsigned char vec_packsu (vector unsigned short, |
5329 | vector unsigned short); | |
924fcc4e JM |
5330 | vector unsigned char vec_packsu (vector signed short, |
5331 | vector signed short); | |
5332 | vector unsigned short vec_packsu (vector unsigned int, | |
5333 | vector unsigned int); | |
333c8841 AH |
5334 | vector unsigned short vec_packsu (vector signed int, vector signed int); |
5335 | ||
924fcc4e JM |
5336 | vector float vec_perm (vector float, vector float, |
5337 | vector unsigned char); | |
6e5bb5ad JM |
5338 | vector signed int vec_perm (vector signed int, vector signed int, |
5339 | vector unsigned char); | |
5340 | vector unsigned int vec_perm (vector unsigned int, vector unsigned int, | |
5341 | vector unsigned char); | |
5342 | vector signed short vec_perm (vector signed short, vector signed short, | |
5343 | vector unsigned char); | |
5344 | vector unsigned short vec_perm (vector unsigned short, | |
5345 | vector unsigned short, | |
5346 | vector unsigned char); | |
5347 | vector signed char vec_perm (vector signed char, vector signed char, | |
5348 | vector unsigned char); | |
924fcc4e JM |
5349 | vector unsigned char vec_perm (vector unsigned char, |
5350 | vector unsigned char, | |
6e5bb5ad | 5351 | vector unsigned char); |
333c8841 AH |
5352 | |
5353 | vector float vec_re (vector float); | |
5354 | ||
5355 | vector signed char vec_rl (vector signed char, vector unsigned char); | |
924fcc4e JM |
5356 | vector unsigned char vec_rl (vector unsigned char, |
5357 | vector unsigned char); | |
333c8841 AH |
5358 | vector signed short vec_rl (vector signed short, vector unsigned short); |
5359 | ||
924fcc4e JM |
5360 | vector unsigned short vec_rl (vector unsigned short, |
5361 | vector unsigned short); | |
333c8841 AH |
5362 | vector signed int vec_rl (vector signed int, vector unsigned int); |
5363 | vector unsigned int vec_rl (vector unsigned int, vector unsigned int); | |
5364 | ||
5365 | vector float vec_round (vector float); | |
5366 | ||
5367 | vector float vec_rsqrte (vector float); | |
5368 | ||
5369 | vector float vec_sel (vector float, vector float, vector signed int); | |
5370 | vector float vec_sel (vector float, vector float, vector unsigned int); | |
6e5bb5ad JM |
5371 | vector signed int vec_sel (vector signed int, vector signed int, |
5372 | vector signed int); | |
5373 | vector signed int vec_sel (vector signed int, vector signed int, | |
5374 | vector unsigned int); | |
5375 | vector unsigned int vec_sel (vector unsigned int, vector unsigned int, | |
5376 | vector signed int); | |
5377 | vector unsigned int vec_sel (vector unsigned int, vector unsigned int, | |
5378 | vector unsigned int); | |
5379 | vector signed short vec_sel (vector signed short, vector signed short, | |
5380 | vector signed short); | |
5381 | vector signed short vec_sel (vector signed short, vector signed short, | |
5382 | vector unsigned short); | |
5383 | vector unsigned short vec_sel (vector unsigned short, | |
924fcc4e JM |
5384 | vector unsigned short, |
5385 | vector signed short); | |
6e5bb5ad JM |
5386 | vector unsigned short vec_sel (vector unsigned short, |
5387 | vector unsigned short, | |
5388 | vector unsigned short); | |
5389 | vector signed char vec_sel (vector signed char, vector signed char, | |
5390 | vector signed char); | |
5391 | vector signed char vec_sel (vector signed char, vector signed char, | |
5392 | vector unsigned char); | |
924fcc4e JM |
5393 | vector unsigned char vec_sel (vector unsigned char, |
5394 | vector unsigned char, | |
6e5bb5ad | 5395 | vector signed char); |
924fcc4e JM |
5396 | vector unsigned char vec_sel (vector unsigned char, |
5397 | vector unsigned char, | |
6e5bb5ad | 5398 | vector unsigned char); |
333c8841 AH |
5399 | |
5400 | vector signed char vec_sl (vector signed char, vector unsigned char); | |
924fcc4e JM |
5401 | vector unsigned char vec_sl (vector unsigned char, |
5402 | vector unsigned char); | |
333c8841 AH |
5403 | vector signed short vec_sl (vector signed short, vector unsigned short); |
5404 | ||
924fcc4e JM |
5405 | vector unsigned short vec_sl (vector unsigned short, |
5406 | vector unsigned short); | |
333c8841 AH |
5407 | vector signed int vec_sl (vector signed int, vector unsigned int); |
5408 | vector unsigned int vec_sl (vector unsigned int, vector unsigned int); | |
5409 | ||
5410 | vector float vec_sld (vector float, vector float, const char); | |
6e5bb5ad JM |
5411 | vector signed int vec_sld (vector signed int, vector signed int, |
5412 | const char); | |
5413 | vector unsigned int vec_sld (vector unsigned int, vector unsigned int, | |
5414 | const char); | |
5415 | vector signed short vec_sld (vector signed short, vector signed short, | |
5416 | const char); | |
5417 | vector unsigned short vec_sld (vector unsigned short, | |
5418 | vector unsigned short, const char); | |
5419 | vector signed char vec_sld (vector signed char, vector signed char, | |
5420 | const char); | |
924fcc4e JM |
5421 | vector unsigned char vec_sld (vector unsigned char, |
5422 | vector unsigned char, | |
6e5bb5ad | 5423 | const char); |
333c8841 AH |
5424 | |
5425 | vector signed int vec_sll (vector signed int, vector unsigned int); | |
5426 | vector signed int vec_sll (vector signed int, vector unsigned short); | |
5427 | vector signed int vec_sll (vector signed int, vector unsigned char); | |
5428 | vector unsigned int vec_sll (vector unsigned int, vector unsigned int); | |
924fcc4e JM |
5429 | vector unsigned int vec_sll (vector unsigned int, |
5430 | vector unsigned short); | |
333c8841 AH |
5431 | vector unsigned int vec_sll (vector unsigned int, vector unsigned char); |
5432 | ||
5433 | vector signed short vec_sll (vector signed short, vector unsigned int); | |
924fcc4e JM |
5434 | vector signed short vec_sll (vector signed short, |
5435 | vector unsigned short); | |
333c8841 AH |
5436 | vector signed short vec_sll (vector signed short, vector unsigned char); |
5437 | ||
924fcc4e JM |
5438 | vector unsigned short vec_sll (vector unsigned short, |
5439 | vector unsigned int); | |
6e5bb5ad JM |
5440 | vector unsigned short vec_sll (vector unsigned short, |
5441 | vector unsigned short); | |
924fcc4e JM |
5442 | vector unsigned short vec_sll (vector unsigned short, |
5443 | vector unsigned char); | |
333c8841 AH |
5444 | vector signed char vec_sll (vector signed char, vector unsigned int); |
5445 | vector signed char vec_sll (vector signed char, vector unsigned short); | |
5446 | vector signed char vec_sll (vector signed char, vector unsigned char); | |
924fcc4e JM |
5447 | vector unsigned char vec_sll (vector unsigned char, |
5448 | vector unsigned int); | |
5449 | vector unsigned char vec_sll (vector unsigned char, | |
5450 | vector unsigned short); | |
5451 | vector unsigned char vec_sll (vector unsigned char, | |
5452 | vector unsigned char); | |
333c8841 AH |
5453 | |
5454 | vector float vec_slo (vector float, vector signed char); | |
5455 | vector float vec_slo (vector float, vector unsigned char); | |
5456 | vector signed int vec_slo (vector signed int, vector signed char); | |
5457 | vector signed int vec_slo (vector signed int, vector unsigned char); | |
5458 | vector unsigned int vec_slo (vector unsigned int, vector signed char); | |
5459 | vector unsigned int vec_slo (vector unsigned int, vector unsigned char); | |
5460 | ||
5461 | vector signed short vec_slo (vector signed short, vector signed char); | |
5462 | vector signed short vec_slo (vector signed short, vector unsigned char); | |
5463 | ||
924fcc4e JM |
5464 | vector unsigned short vec_slo (vector unsigned short, |
5465 | vector signed char); | |
5466 | vector unsigned short vec_slo (vector unsigned short, | |
5467 | vector unsigned char); | |
333c8841 AH |
5468 | vector signed char vec_slo (vector signed char, vector signed char); |
5469 | vector signed char vec_slo (vector signed char, vector unsigned char); | |
5470 | vector unsigned char vec_slo (vector unsigned char, vector signed char); | |
5471 | ||
924fcc4e JM |
5472 | vector unsigned char vec_slo (vector unsigned char, |
5473 | vector unsigned char); | |
333c8841 AH |
5474 | |
5475 | vector signed char vec_splat (vector signed char, const char); | |
5476 | vector unsigned char vec_splat (vector unsigned char, const char); | |
5477 | vector signed short vec_splat (vector signed short, const char); | |
5478 | vector unsigned short vec_splat (vector unsigned short, const char); | |
5479 | vector float vec_splat (vector float, const char); | |
5480 | vector signed int vec_splat (vector signed int, const char); | |
5481 | vector unsigned int vec_splat (vector unsigned int, const char); | |
5482 | ||
5483 | vector signed char vec_splat_s8 (const char); | |
5484 | ||
5485 | vector signed short vec_splat_s16 (const char); | |
5486 | ||
5487 | vector signed int vec_splat_s32 (const char); | |
5488 | ||
5489 | vector unsigned char vec_splat_u8 (const char); | |
5490 | ||
5491 | vector unsigned short vec_splat_u16 (const char); | |
5492 | ||
5493 | vector unsigned int vec_splat_u32 (const char); | |
5494 | ||
5495 | vector signed char vec_sr (vector signed char, vector unsigned char); | |
924fcc4e JM |
5496 | vector unsigned char vec_sr (vector unsigned char, |
5497 | vector unsigned char); | |
333c8841 AH |
5498 | vector signed short vec_sr (vector signed short, vector unsigned short); |
5499 | ||
924fcc4e JM |
5500 | vector unsigned short vec_sr (vector unsigned short, |
5501 | vector unsigned short); | |
333c8841 AH |
5502 | vector signed int vec_sr (vector signed int, vector unsigned int); |
5503 | vector unsigned int vec_sr (vector unsigned int, vector unsigned int); | |
5504 | ||
5505 | vector signed char vec_sra (vector signed char, vector unsigned char); | |
924fcc4e JM |
5506 | vector unsigned char vec_sra (vector unsigned char, |
5507 | vector unsigned char); | |
5508 | vector signed short vec_sra (vector signed short, | |
5509 | vector unsigned short); | |
6e5bb5ad JM |
5510 | vector unsigned short vec_sra (vector unsigned short, |
5511 | vector unsigned short); | |
333c8841 AH |
5512 | vector signed int vec_sra (vector signed int, vector unsigned int); |
5513 | vector unsigned int vec_sra (vector unsigned int, vector unsigned int); | |
5514 | ||
5515 | vector signed int vec_srl (vector signed int, vector unsigned int); | |
5516 | vector signed int vec_srl (vector signed int, vector unsigned short); | |
5517 | vector signed int vec_srl (vector signed int, vector unsigned char); | |
5518 | vector unsigned int vec_srl (vector unsigned int, vector unsigned int); | |
924fcc4e JM |
5519 | vector unsigned int vec_srl (vector unsigned int, |
5520 | vector unsigned short); | |
333c8841 AH |
5521 | vector unsigned int vec_srl (vector unsigned int, vector unsigned char); |
5522 | ||
5523 | vector signed short vec_srl (vector signed short, vector unsigned int); | |
924fcc4e JM |
5524 | vector signed short vec_srl (vector signed short, |
5525 | vector unsigned short); | |
333c8841 AH |
5526 | vector signed short vec_srl (vector signed short, vector unsigned char); |
5527 | ||
924fcc4e JM |
5528 | vector unsigned short vec_srl (vector unsigned short, |
5529 | vector unsigned int); | |
6e5bb5ad JM |
5530 | vector unsigned short vec_srl (vector unsigned short, |
5531 | vector unsigned short); | |
924fcc4e JM |
5532 | vector unsigned short vec_srl (vector unsigned short, |
5533 | vector unsigned char); | |
333c8841 AH |
5534 | vector signed char vec_srl (vector signed char, vector unsigned int); |
5535 | vector signed char vec_srl (vector signed char, vector unsigned short); | |
5536 | vector signed char vec_srl (vector signed char, vector unsigned char); | |
924fcc4e JM |
5537 | vector unsigned char vec_srl (vector unsigned char, |
5538 | vector unsigned int); | |
5539 | vector unsigned char vec_srl (vector unsigned char, | |
5540 | vector unsigned short); | |
5541 | vector unsigned char vec_srl (vector unsigned char, | |
5542 | vector unsigned char); | |
333c8841 AH |
5543 | |
5544 | vector float vec_sro (vector float, vector signed char); | |
5545 | vector float vec_sro (vector float, vector unsigned char); | |
5546 | vector signed int vec_sro (vector signed int, vector signed char); | |
5547 | vector signed int vec_sro (vector signed int, vector unsigned char); | |
5548 | vector unsigned int vec_sro (vector unsigned int, vector signed char); | |
5549 | vector unsigned int vec_sro (vector unsigned int, vector unsigned char); | |
5550 | ||
5551 | vector signed short vec_sro (vector signed short, vector signed char); | |
5552 | vector signed short vec_sro (vector signed short, vector unsigned char); | |
5553 | ||
924fcc4e JM |
5554 | vector unsigned short vec_sro (vector unsigned short, |
5555 | vector signed char); | |
5556 | vector unsigned short vec_sro (vector unsigned short, | |
5557 | vector unsigned char); | |
333c8841 AH |
5558 | vector signed char vec_sro (vector signed char, vector signed char); |
5559 | vector signed char vec_sro (vector signed char, vector unsigned char); | |
5560 | vector unsigned char vec_sro (vector unsigned char, vector signed char); | |
5561 | ||
924fcc4e JM |
5562 | vector unsigned char vec_sro (vector unsigned char, |
5563 | vector unsigned char); | |
333c8841 AH |
5564 | |
5565 | void vec_st (vector float, int, float *); | |
5566 | void vec_st (vector float, int, vector float *); | |
5567 | void vec_st (vector signed int, int, int *); | |
5568 | void vec_st (vector signed int, int, unsigned int *); | |
5569 | void vec_st (vector unsigned int, int, unsigned int *); | |
5570 | void vec_st (vector unsigned int, int, vector unsigned int *); | |
5571 | void vec_st (vector signed short, int, short *); | |
5572 | void vec_st (vector signed short, int, vector unsigned short *); | |
5573 | void vec_st (vector signed short, int, vector signed short *); | |
5574 | void vec_st (vector unsigned short, int, unsigned short *); | |
5575 | void vec_st (vector unsigned short, int, vector unsigned short *); | |
5576 | void vec_st (vector signed char, int, signed char *); | |
5577 | void vec_st (vector signed char, int, unsigned char *); | |
5578 | void vec_st (vector signed char, int, vector signed char *); | |
5579 | void vec_st (vector unsigned char, int, unsigned char *); | |
5580 | void vec_st (vector unsigned char, int, vector unsigned char *); | |
5581 | ||
5582 | void vec_ste (vector signed char, int, unsigned char *); | |
5583 | void vec_ste (vector signed char, int, signed char *); | |
5584 | void vec_ste (vector unsigned char, int, unsigned char *); | |
5585 | void vec_ste (vector signed short, int, short *); | |
5586 | void vec_ste (vector signed short, int, unsigned short *); | |
5587 | void vec_ste (vector unsigned short, int, void *); | |
5588 | void vec_ste (vector signed int, int, unsigned int *); | |
5589 | void vec_ste (vector signed int, int, int *); | |
5590 | void vec_ste (vector unsigned int, int, unsigned int *); | |
5591 | void vec_ste (vector float, int, float *); | |
5592 | ||
5593 | void vec_stl (vector float, int, vector float *); | |
5594 | void vec_stl (vector float, int, float *); | |
5595 | void vec_stl (vector signed int, int, vector signed int *); | |
5596 | void vec_stl (vector signed int, int, int *); | |
5597 | void vec_stl (vector signed int, int, unsigned int *); | |
5598 | void vec_stl (vector unsigned int, int, vector unsigned int *); | |
5599 | void vec_stl (vector unsigned int, int, unsigned int *); | |
5600 | void vec_stl (vector signed short, int, short *); | |
5601 | void vec_stl (vector signed short, int, unsigned short *); | |
5602 | void vec_stl (vector signed short, int, vector signed short *); | |
5603 | void vec_stl (vector unsigned short, int, unsigned short *); | |
5604 | void vec_stl (vector unsigned short, int, vector signed short *); | |
5605 | void vec_stl (vector signed char, int, signed char *); | |
5606 | void vec_stl (vector signed char, int, unsigned char *); | |
5607 | void vec_stl (vector signed char, int, vector signed char *); | |
5608 | void vec_stl (vector unsigned char, int, unsigned char *); | |
5609 | void vec_stl (vector unsigned char, int, vector unsigned char *); | |
5610 | ||
5611 | vector signed char vec_sub (vector signed char, vector signed char); | |
5612 | vector unsigned char vec_sub (vector signed char, vector unsigned char); | |
5613 | ||
5614 | vector unsigned char vec_sub (vector unsigned char, vector signed char); | |
5615 | ||
924fcc4e JM |
5616 | vector unsigned char vec_sub (vector unsigned char, |
5617 | vector unsigned char); | |
333c8841 | 5618 | vector signed short vec_sub (vector signed short, vector signed short); |
924fcc4e JM |
5619 | vector unsigned short vec_sub (vector signed short, |
5620 | vector unsigned short); | |
5621 | vector unsigned short vec_sub (vector unsigned short, | |
5622 | vector signed short); | |
6e5bb5ad JM |
5623 | vector unsigned short vec_sub (vector unsigned short, |
5624 | vector unsigned short); | |
333c8841 AH |
5625 | vector signed int vec_sub (vector signed int, vector signed int); |
5626 | vector unsigned int vec_sub (vector signed int, vector unsigned int); | |
5627 | vector unsigned int vec_sub (vector unsigned int, vector signed int); | |
5628 | vector unsigned int vec_sub (vector unsigned int, vector unsigned int); | |
5629 | vector float vec_sub (vector float, vector float); | |
5630 | ||
5631 | vector unsigned int vec_subc (vector unsigned int, vector unsigned int); | |
5632 | ||
924fcc4e JM |
5633 | vector unsigned char vec_subs (vector signed char, |
5634 | vector unsigned char); | |
5635 | vector unsigned char vec_subs (vector unsigned char, | |
5636 | vector signed char); | |
5637 | vector unsigned char vec_subs (vector unsigned char, | |
5638 | vector unsigned char); | |
333c8841 | 5639 | vector signed char vec_subs (vector signed char, vector signed char); |
924fcc4e JM |
5640 | vector unsigned short vec_subs (vector signed short, |
5641 | vector unsigned short); | |
5642 | vector unsigned short vec_subs (vector unsigned short, | |
5643 | vector signed short); | |
6e5bb5ad JM |
5644 | vector unsigned short vec_subs (vector unsigned short, |
5645 | vector unsigned short); | |
333c8841 AH |
5646 | vector signed short vec_subs (vector signed short, vector signed short); |
5647 | ||
5648 | vector unsigned int vec_subs (vector signed int, vector unsigned int); | |
5649 | vector unsigned int vec_subs (vector unsigned int, vector signed int); | |
5650 | vector unsigned int vec_subs (vector unsigned int, vector unsigned int); | |
5651 | ||
5652 | vector signed int vec_subs (vector signed int, vector signed int); | |
5653 | ||
924fcc4e JM |
5654 | vector unsigned int vec_sum4s (vector unsigned char, |
5655 | vector unsigned int); | |
333c8841 AH |
5656 | vector signed int vec_sum4s (vector signed char, vector signed int); |
5657 | vector signed int vec_sum4s (vector signed short, vector signed int); | |
5658 | ||
5659 | vector signed int vec_sum2s (vector signed int, vector signed int); | |
5660 | ||
5661 | vector signed int vec_sums (vector signed int, vector signed int); | |
5662 | ||
5663 | vector float vec_trunc (vector float); | |
5664 | ||
5665 | vector signed short vec_unpackh (vector signed char); | |
5666 | vector unsigned int vec_unpackh (vector signed short); | |
5667 | vector signed int vec_unpackh (vector signed short); | |
5668 | ||
5669 | vector signed short vec_unpackl (vector signed char); | |
5670 | vector unsigned int vec_unpackl (vector signed short); | |
5671 | vector signed int vec_unpackl (vector signed short); | |
5672 | ||
5673 | vector float vec_xor (vector float, vector float); | |
5674 | vector float vec_xor (vector float, vector signed int); | |
5675 | vector float vec_xor (vector signed int, vector float); | |
5676 | vector signed int vec_xor (vector signed int, vector signed int); | |
5677 | vector unsigned int vec_xor (vector signed int, vector unsigned int); | |
5678 | vector unsigned int vec_xor (vector unsigned int, vector signed int); | |
5679 | vector unsigned int vec_xor (vector unsigned int, vector unsigned int); | |
5680 | vector signed short vec_xor (vector signed short, vector signed short); | |
924fcc4e JM |
5681 | vector unsigned short vec_xor (vector signed short, |
5682 | vector unsigned short); | |
5683 | vector unsigned short vec_xor (vector unsigned short, | |
5684 | vector signed short); | |
6e5bb5ad JM |
5685 | vector unsigned short vec_xor (vector unsigned short, |
5686 | vector unsigned short); | |
333c8841 AH |
5687 | vector signed char vec_xor (vector signed char, vector signed char); |
5688 | vector unsigned char vec_xor (vector signed char, vector unsigned char); | |
5689 | ||
5690 | vector unsigned char vec_xor (vector unsigned char, vector signed char); | |
5691 | ||
924fcc4e JM |
5692 | vector unsigned char vec_xor (vector unsigned char, |
5693 | vector unsigned char); | |
333c8841 AH |
5694 | |
5695 | vector signed int vec_all_eq (vector signed char, vector unsigned char); | |
5696 | ||
5697 | vector signed int vec_all_eq (vector signed char, vector signed char); | |
5698 | vector signed int vec_all_eq (vector unsigned char, vector signed char); | |
5699 | ||
924fcc4e JM |
5700 | vector signed int vec_all_eq (vector unsigned char, |
5701 | vector unsigned char); | |
5702 | vector signed int vec_all_eq (vector signed short, | |
5703 | vector unsigned short); | |
333c8841 AH |
5704 | vector signed int vec_all_eq (vector signed short, vector signed short); |
5705 | ||
924fcc4e JM |
5706 | vector signed int vec_all_eq (vector unsigned short, |
5707 | vector signed short); | |
5708 | vector signed int vec_all_eq (vector unsigned short, | |
5709 | vector unsigned short); | |
333c8841 AH |
5710 | vector signed int vec_all_eq (vector signed int, vector unsigned int); |
5711 | vector signed int vec_all_eq (vector signed int, vector signed int); | |
5712 | vector signed int vec_all_eq (vector unsigned int, vector signed int); | |
5713 | vector signed int vec_all_eq (vector unsigned int, vector unsigned int); | |
5714 | ||
5715 | vector signed int vec_all_eq (vector float, vector float); | |
5716 | ||
5717 | vector signed int vec_all_ge (vector signed char, vector unsigned char); | |
5718 | ||
5719 | vector signed int vec_all_ge (vector unsigned char, vector signed char); | |
5720 | ||
924fcc4e JM |
5721 | vector signed int vec_all_ge (vector unsigned char, |
5722 | vector unsigned char); | |
333c8841 | 5723 | vector signed int vec_all_ge (vector signed char, vector signed char); |
924fcc4e JM |
5724 | vector signed int vec_all_ge (vector signed short, |
5725 | vector unsigned short); | |
5726 | vector signed int vec_all_ge (vector unsigned short, | |
5727 | vector signed short); | |
5728 | vector signed int vec_all_ge (vector unsigned short, | |
5729 | vector unsigned short); | |
333c8841 AH |
5730 | vector signed int vec_all_ge (vector signed short, vector signed short); |
5731 | ||
5732 | vector signed int vec_all_ge (vector signed int, vector unsigned int); | |
5733 | vector signed int vec_all_ge (vector unsigned int, vector signed int); | |
5734 | vector signed int vec_all_ge (vector unsigned int, vector unsigned int); | |
5735 | ||
5736 | vector signed int vec_all_ge (vector signed int, vector signed int); | |
5737 | vector signed int vec_all_ge (vector float, vector float); | |
5738 | ||
5739 | vector signed int vec_all_gt (vector signed char, vector unsigned char); | |
5740 | ||
5741 | vector signed int vec_all_gt (vector unsigned char, vector signed char); | |
5742 | ||
924fcc4e JM |
5743 | vector signed int vec_all_gt (vector unsigned char, |
5744 | vector unsigned char); | |
333c8841 | 5745 | vector signed int vec_all_gt (vector signed char, vector signed char); |
924fcc4e JM |
5746 | vector signed int vec_all_gt (vector signed short, |
5747 | vector unsigned short); | |
f282ffb3 | 5748 | vector signed int vec_all_gt (vector unsigned short, |
924fcc4e JM |
5749 | vector signed short); |
5750 | vector signed int vec_all_gt (vector unsigned short, | |
5751 | vector unsigned short); | |
333c8841 AH |
5752 | vector signed int vec_all_gt (vector signed short, vector signed short); |
5753 | ||
5754 | vector signed int vec_all_gt (vector signed int, vector unsigned int); | |
5755 | vector signed int vec_all_gt (vector unsigned int, vector signed int); | |
5756 | vector signed int vec_all_gt (vector unsigned int, vector unsigned int); | |
5757 | ||
5758 | vector signed int vec_all_gt (vector signed int, vector signed int); | |
5759 | vector signed int vec_all_gt (vector float, vector float); | |
5760 | ||
5761 | vector signed int vec_all_in (vector float, vector float); | |
5762 | ||
5763 | vector signed int vec_all_le (vector signed char, vector unsigned char); | |
5764 | ||
5765 | vector signed int vec_all_le (vector unsigned char, vector signed char); | |
5766 | ||
924fcc4e JM |
5767 | vector signed int vec_all_le (vector unsigned char, |
5768 | vector unsigned char); | |
333c8841 | 5769 | vector signed int vec_all_le (vector signed char, vector signed char); |
924fcc4e JM |
5770 | vector signed int vec_all_le (vector signed short, |
5771 | vector unsigned short); | |
5772 | vector signed int vec_all_le (vector unsigned short, | |
5773 | vector signed short); | |
5774 | vector signed int vec_all_le (vector unsigned short, | |
5775 | vector unsigned short); | |
333c8841 AH |
5776 | vector signed int vec_all_le (vector signed short, vector signed short); |
5777 | ||
5778 | vector signed int vec_all_le (vector signed int, vector unsigned int); | |
5779 | vector signed int vec_all_le (vector unsigned int, vector signed int); | |
5780 | vector signed int vec_all_le (vector unsigned int, vector unsigned int); | |
5781 | ||
5782 | vector signed int vec_all_le (vector signed int, vector signed int); | |
5783 | vector signed int vec_all_le (vector float, vector float); | |
5784 | ||
5785 | vector signed int vec_all_lt (vector signed char, vector unsigned char); | |
5786 | ||
5787 | vector signed int vec_all_lt (vector unsigned char, vector signed char); | |
5788 | ||
924fcc4e JM |
5789 | vector signed int vec_all_lt (vector unsigned char, |
5790 | vector unsigned char); | |
333c8841 | 5791 | vector signed int vec_all_lt (vector signed char, vector signed char); |
924fcc4e JM |
5792 | vector signed int vec_all_lt (vector signed short, |
5793 | vector unsigned short); | |
5794 | vector signed int vec_all_lt (vector unsigned short, | |
5795 | vector signed short); | |
5796 | vector signed int vec_all_lt (vector unsigned short, | |
5797 | vector unsigned short); | |
333c8841 AH |
5798 | vector signed int vec_all_lt (vector signed short, vector signed short); |
5799 | ||
5800 | vector signed int vec_all_lt (vector signed int, vector unsigned int); | |
5801 | vector signed int vec_all_lt (vector unsigned int, vector signed int); | |
5802 | vector signed int vec_all_lt (vector unsigned int, vector unsigned int); | |
5803 | ||
5804 | vector signed int vec_all_lt (vector signed int, vector signed int); | |
5805 | vector signed int vec_all_lt (vector float, vector float); | |
5806 | ||
5807 | vector signed int vec_all_nan (vector float); | |
5808 | ||
5809 | vector signed int vec_all_ne (vector signed char, vector unsigned char); | |
5810 | ||
5811 | vector signed int vec_all_ne (vector signed char, vector signed char); | |
5812 | vector signed int vec_all_ne (vector unsigned char, vector signed char); | |
5813 | ||
924fcc4e JM |
5814 | vector signed int vec_all_ne (vector unsigned char, |
5815 | vector unsigned char); | |
5816 | vector signed int vec_all_ne (vector signed short, | |
5817 | vector unsigned short); | |
333c8841 AH |
5818 | vector signed int vec_all_ne (vector signed short, vector signed short); |
5819 | ||
924fcc4e JM |
5820 | vector signed int vec_all_ne (vector unsigned short, |
5821 | vector signed short); | |
5822 | vector signed int vec_all_ne (vector unsigned short, | |
5823 | vector unsigned short); | |
333c8841 AH |
5824 | vector signed int vec_all_ne (vector signed int, vector unsigned int); |
5825 | vector signed int vec_all_ne (vector signed int, vector signed int); | |
5826 | vector signed int vec_all_ne (vector unsigned int, vector signed int); | |
5827 | vector signed int vec_all_ne (vector unsigned int, vector unsigned int); | |
5828 | ||
5829 | vector signed int vec_all_ne (vector float, vector float); | |
5830 | ||
5831 | vector signed int vec_all_nge (vector float, vector float); | |
5832 | ||
5833 | vector signed int vec_all_ngt (vector float, vector float); | |
5834 | ||
5835 | vector signed int vec_all_nle (vector float, vector float); | |
5836 | ||
5837 | vector signed int vec_all_nlt (vector float, vector float); | |
5838 | ||
5839 | vector signed int vec_all_numeric (vector float); | |
5840 | ||
5841 | vector signed int vec_any_eq (vector signed char, vector unsigned char); | |
5842 | ||
5843 | vector signed int vec_any_eq (vector signed char, vector signed char); | |
5844 | vector signed int vec_any_eq (vector unsigned char, vector signed char); | |
5845 | ||
924fcc4e JM |
5846 | vector signed int vec_any_eq (vector unsigned char, |
5847 | vector unsigned char); | |
5848 | vector signed int vec_any_eq (vector signed short, | |
5849 | vector unsigned short); | |
333c8841 AH |
5850 | vector signed int vec_any_eq (vector signed short, vector signed short); |
5851 | ||
924fcc4e JM |
5852 | vector signed int vec_any_eq (vector unsigned short, |
5853 | vector signed short); | |
5854 | vector signed int vec_any_eq (vector unsigned short, | |
5855 | vector unsigned short); | |
333c8841 AH |
5856 | vector signed int vec_any_eq (vector signed int, vector unsigned int); |
5857 | vector signed int vec_any_eq (vector signed int, vector signed int); | |
5858 | vector signed int vec_any_eq (vector unsigned int, vector signed int); | |
5859 | vector signed int vec_any_eq (vector unsigned int, vector unsigned int); | |
5860 | ||
5861 | vector signed int vec_any_eq (vector float, vector float); | |
5862 | ||
5863 | vector signed int vec_any_ge (vector signed char, vector unsigned char); | |
5864 | ||
5865 | vector signed int vec_any_ge (vector unsigned char, vector signed char); | |
5866 | ||
924fcc4e JM |
5867 | vector signed int vec_any_ge (vector unsigned char, |
5868 | vector unsigned char); | |
333c8841 | 5869 | vector signed int vec_any_ge (vector signed char, vector signed char); |
924fcc4e JM |
5870 | vector signed int vec_any_ge (vector signed short, |
5871 | vector unsigned short); | |
5872 | vector signed int vec_any_ge (vector unsigned short, | |
5873 | vector signed short); | |
5874 | vector signed int vec_any_ge (vector unsigned short, | |
5875 | vector unsigned short); | |
333c8841 AH |
5876 | vector signed int vec_any_ge (vector signed short, vector signed short); |
5877 | ||
5878 | vector signed int vec_any_ge (vector signed int, vector unsigned int); | |
5879 | vector signed int vec_any_ge (vector unsigned int, vector signed int); | |
5880 | vector signed int vec_any_ge (vector unsigned int, vector unsigned int); | |
5881 | ||
5882 | vector signed int vec_any_ge (vector signed int, vector signed int); | |
5883 | vector signed int vec_any_ge (vector float, vector float); | |
5884 | ||
5885 | vector signed int vec_any_gt (vector signed char, vector unsigned char); | |
5886 | ||
5887 | vector signed int vec_any_gt (vector unsigned char, vector signed char); | |
5888 | ||
924fcc4e JM |
5889 | vector signed int vec_any_gt (vector unsigned char, |
5890 | vector unsigned char); | |
333c8841 | 5891 | vector signed int vec_any_gt (vector signed char, vector signed char); |
924fcc4e JM |
5892 | vector signed int vec_any_gt (vector signed short, |
5893 | vector unsigned short); | |
5894 | vector signed int vec_any_gt (vector unsigned short, | |
5895 | vector signed short); | |
5896 | vector signed int vec_any_gt (vector unsigned short, | |
5897 | vector unsigned short); | |
333c8841 AH |
5898 | vector signed int vec_any_gt (vector signed short, vector signed short); |
5899 | ||
5900 | vector signed int vec_any_gt (vector signed int, vector unsigned int); | |
5901 | vector signed int vec_any_gt (vector unsigned int, vector signed int); | |
5902 | vector signed int vec_any_gt (vector unsigned int, vector unsigned int); | |
5903 | ||
5904 | vector signed int vec_any_gt (vector signed int, vector signed int); | |
5905 | vector signed int vec_any_gt (vector float, vector float); | |
5906 | ||
5907 | vector signed int vec_any_le (vector signed char, vector unsigned char); | |
5908 | ||
5909 | vector signed int vec_any_le (vector unsigned char, vector signed char); | |
5910 | ||
924fcc4e JM |
5911 | vector signed int vec_any_le (vector unsigned char, |
5912 | vector unsigned char); | |
333c8841 | 5913 | vector signed int vec_any_le (vector signed char, vector signed char); |
924fcc4e JM |
5914 | vector signed int vec_any_le (vector signed short, |
5915 | vector unsigned short); | |
5916 | vector signed int vec_any_le (vector unsigned short, | |
5917 | vector signed short); | |
5918 | vector signed int vec_any_le (vector unsigned short, | |
5919 | vector unsigned short); | |
333c8841 AH |
5920 | vector signed int vec_any_le (vector signed short, vector signed short); |
5921 | ||
5922 | vector signed int vec_any_le (vector signed int, vector unsigned int); | |
5923 | vector signed int vec_any_le (vector unsigned int, vector signed int); | |
5924 | vector signed int vec_any_le (vector unsigned int, vector unsigned int); | |
5925 | ||
5926 | vector signed int vec_any_le (vector signed int, vector signed int); | |
5927 | vector signed int vec_any_le (vector float, vector float); | |
5928 | ||
5929 | vector signed int vec_any_lt (vector signed char, vector unsigned char); | |
5930 | ||
5931 | vector signed int vec_any_lt (vector unsigned char, vector signed char); | |
5932 | ||
924fcc4e JM |
5933 | vector signed int vec_any_lt (vector unsigned char, |
5934 | vector unsigned char); | |
333c8841 | 5935 | vector signed int vec_any_lt (vector signed char, vector signed char); |
924fcc4e JM |
5936 | vector signed int vec_any_lt (vector signed short, |
5937 | vector unsigned short); | |
5938 | vector signed int vec_any_lt (vector unsigned short, | |
5939 | vector signed short); | |
5940 | vector signed int vec_any_lt (vector unsigned short, | |
5941 | vector unsigned short); | |
333c8841 AH |
5942 | vector signed int vec_any_lt (vector signed short, vector signed short); |
5943 | ||
5944 | vector signed int vec_any_lt (vector signed int, vector unsigned int); | |
5945 | vector signed int vec_any_lt (vector unsigned int, vector signed int); | |
5946 | vector signed int vec_any_lt (vector unsigned int, vector unsigned int); | |
5947 | ||
5948 | vector signed int vec_any_lt (vector signed int, vector signed int); | |
5949 | vector signed int vec_any_lt (vector float, vector float); | |
5950 | ||
5951 | vector signed int vec_any_nan (vector float); | |
5952 | ||
5953 | vector signed int vec_any_ne (vector signed char, vector unsigned char); | |
5954 | ||
5955 | vector signed int vec_any_ne (vector signed char, vector signed char); | |
5956 | vector signed int vec_any_ne (vector unsigned char, vector signed char); | |
5957 | ||
924fcc4e JM |
5958 | vector signed int vec_any_ne (vector unsigned char, |
5959 | vector unsigned char); | |
5960 | vector signed int vec_any_ne (vector signed short, | |
5961 | vector unsigned short); | |
333c8841 AH |
5962 | vector signed int vec_any_ne (vector signed short, vector signed short); |
5963 | ||
924fcc4e JM |
5964 | vector signed int vec_any_ne (vector unsigned short, |
5965 | vector signed short); | |
5966 | vector signed int vec_any_ne (vector unsigned short, | |
5967 | vector unsigned short); | |
333c8841 AH |
5968 | vector signed int vec_any_ne (vector signed int, vector unsigned int); |
5969 | vector signed int vec_any_ne (vector signed int, vector signed int); | |
5970 | vector signed int vec_any_ne (vector unsigned int, vector signed int); | |
5971 | vector signed int vec_any_ne (vector unsigned int, vector unsigned int); | |
5972 | ||
5973 | vector signed int vec_any_ne (vector float, vector float); | |
5974 | ||
5975 | vector signed int vec_any_nge (vector float, vector float); | |
5976 | ||
5977 | vector signed int vec_any_ngt (vector float, vector float); | |
5978 | ||
5979 | vector signed int vec_any_nle (vector float, vector float); | |
5980 | ||
5981 | vector signed int vec_any_nlt (vector float, vector float); | |
5982 | ||
5983 | vector signed int vec_any_numeric (vector float); | |
5984 | ||
5985 | vector signed int vec_any_out (vector float, vector float); | |
5986 | @end smallexample | |
5987 | ||
0168a849 SS |
5988 | @node Pragmas |
5989 | @section Pragmas Accepted by GCC | |
5990 | @cindex pragmas | |
5991 | @cindex #pragma | |
5992 | ||
5993 | GCC supports several types of pragmas, primarily in order to compile | |
5994 | code originally written for other compilers. Note that in general | |
5995 | we do not recommend the use of pragmas; @xref{Function Attributes}, | |
5996 | for further explanation. | |
5997 | ||
5998 | @menu | |
5999 | * ARM Pragmas:: | |
a5c76ee6 | 6000 | * RS/6000 and PowerPC Pragmas:: |
0168a849 | 6001 | * Darwin Pragmas:: |
41c64394 RH |
6002 | * Solaris Pragmas:: |
6003 | * Tru64 Pragmas:: | |
0168a849 SS |
6004 | @end menu |
6005 | ||
6006 | @node ARM Pragmas | |
6007 | @subsection ARM Pragmas | |
6008 | ||
6009 | The ARM target defines pragmas for controlling the default addition of | |
6010 | @code{long_call} and @code{short_call} attributes to functions. | |
6011 | @xref{Function Attributes}, for information about the effects of these | |
6012 | attributes. | |
6013 | ||
6014 | @table @code | |
6015 | @item long_calls | |
6016 | @cindex pragma, long_calls | |
6017 | Set all subsequent functions to have the @code{long_call} attribute. | |
6018 | ||
6019 | @item no_long_calls | |
6020 | @cindex pragma, no_long_calls | |
6021 | Set all subsequent functions to have the @code{short_call} attribute. | |
6022 | ||
6023 | @item long_calls_off | |
6024 | @cindex pragma, long_calls_off | |
6025 | Do not affect the @code{long_call} or @code{short_call} attributes of | |
6026 | subsequent functions. | |
6027 | @end table | |
6028 | ||
a5c76ee6 ZW |
6029 | @node RS/6000 and PowerPC Pragmas |
6030 | @subsection RS/6000 and PowerPC Pragmas | |
6031 | ||
6032 | The RS/6000 and PowerPC targets define one pragma for controlling | |
6033 | whether or not the @code{longcall} attribute is added to function | |
6034 | declarations by default. This pragma overrides the @option{-mlongcall} | |
6035 | option, but not the @code{longcall} and @code{shortcall} attributes. | |
6036 | @xref{RS/6000 and PowerPC Options}, for more information about when long | |
6037 | calls are and are not necessary. | |
6038 | ||
6039 | @table @code | |
6040 | @item longcall (1) | |
6041 | @cindex pragma, longcall | |
6042 | Apply the @code{longcall} attribute to all subsequent function | |
6043 | declarations. | |
6044 | ||
6045 | @item longcall (0) | |
6046 | Do not apply the @code{longcall} attribute to subsequent function | |
6047 | declarations. | |
6048 | @end table | |
6049 | ||
0168a849 SS |
6050 | @c Describe c4x pragmas here. |
6051 | @c Describe h8300 pragmas here. | |
6052 | @c Describe i370 pragmas here. | |
6053 | @c Describe i960 pragmas here. | |
6054 | @c Describe sh pragmas here. | |
6055 | @c Describe v850 pragmas here. | |
6056 | ||
6057 | @node Darwin Pragmas | |
6058 | @subsection Darwin Pragmas | |
6059 | ||
6060 | The following pragmas are available for all architectures running the | |
6061 | Darwin operating system. These are useful for compatibility with other | |
6062 | MacOS compilers. | |
6063 | ||
6064 | @table @code | |
6065 | @item mark @var{tokens}@dots{} | |
6066 | @cindex pragma, mark | |
6067 | This pragma is accepted, but has no effect. | |
6068 | ||
6069 | @item options align=@var{alignment} | |
6070 | @cindex pragma, options align | |
6071 | This pragma sets the alignment of fields in structures. The values of | |
6072 | @var{alignment} may be @code{mac68k}, to emulate m68k alignment, or | |
6073 | @code{power}, to emulate PowerPC alignment. Uses of this pragma nest | |
6074 | properly; to restore the previous setting, use @code{reset} for the | |
6075 | @var{alignment}. | |
6076 | ||
6077 | @item segment @var{tokens}@dots{} | |
6078 | @cindex pragma, segment | |
6079 | This pragma is accepted, but has no effect. | |
6080 | ||
6081 | @item unused (@var{var} [, @var{var}]@dots{}) | |
6082 | @cindex pragma, unused | |
6083 | This pragma declares variables to be possibly unused. GCC will not | |
6084 | produce warnings for the listed variables. The effect is similar to | |
6085 | that of the @code{unused} attribute, except that this pragma may appear | |
6086 | anywhere within the variables' scopes. | |
6087 | @end table | |
6088 | ||
41c64394 RH |
6089 | @node Solaris Pragmas |
6090 | @subsection Solaris Pragmas | |
6091 | ||
6092 | For compatibility with the SunPRO compiler, the following pragma | |
6093 | is supported. | |
6094 | ||
6095 | @table @code | |
6096 | @item redefine_extname @var{oldname} @var{newname} | |
6097 | @cindex pragma, redefine_extname | |
6098 | ||
6099 | This pragma gives the C function @var{oldname} the assembler label | |
6100 | @var{newname}. The pragma must appear before the function declaration. | |
6101 | This pragma is equivalent to the asm labels extension (@pxref{Asm | |
6102 | Labels}). The preprocessor defines @code{__PRAGMA_REDEFINE_EXTNAME} | |
6103 | if the pragma is available. | |
6104 | @end table | |
6105 | ||
6106 | @node Tru64 Pragmas | |
6107 | @subsection Tru64 Pragmas | |
6108 | ||
6109 | For compatibility with the Compaq C compiler, the following pragma | |
6110 | is supported. | |
6111 | ||
6112 | @table @code | |
6113 | @item extern_prefix @var{string} | |
6114 | @cindex pragma, extern_prefix | |
6115 | ||
6116 | This pragma renames all subsequent function and variable declarations | |
6117 | such that @var{string} is prepended to the name. This effect may be | |
6118 | terminated by using another @code{extern_prefix} pragma with the | |
6119 | empty string. | |
6120 | ||
6121 | This pragma is similar in intent to to the asm labels extension | |
6122 | (@pxref{Asm Labels}) in that the system programmer wants to change | |
6123 | the assembly-level ABI without changing the source-level API. The | |
6124 | preprocessor defines @code{__EXTERN_PREFIX} if the pragma is available. | |
6125 | @end table | |
6126 | ||
3e96a2fd DD |
6127 | @node Unnamed Fields |
6128 | @section Unnamed struct/union fields within structs/unions. | |
6129 | @cindex struct | |
6130 | @cindex union | |
6131 | ||
6132 | For compatibility with other compilers, GCC allows you to define | |
6133 | a structure or union that contains, as fields, structures and unions | |
6134 | without names. For example: | |
6135 | ||
6136 | @example | |
6137 | struct @{ | |
6138 | int a; | |
6139 | union @{ | |
6140 | int b; | |
6141 | float c; | |
6142 | @}; | |
6143 | int d; | |
6144 | @} foo; | |
6145 | @end example | |
6146 | ||
6147 | In this example, the user would be able to access members of the unnamed | |
6148 | union with code like @samp{foo.b}. Note that only unnamed structs and | |
6149 | unions are allowed, you may not have, for example, an unnamed | |
6150 | @code{int}. | |
6151 | ||
6152 | You must never create such structures that cause ambiguous field definitions. | |
6153 | For example, this structure: | |
6154 | ||
6155 | @example | |
6156 | struct @{ | |
6157 | int a; | |
6158 | struct @{ | |
6159 | int a; | |
6160 | @}; | |
6161 | @} foo; | |
6162 | @end example | |
6163 | ||
6164 | It is ambiguous which @code{a} is being referred to with @samp{foo.a}. | |
6165 | Such constructs are not supported and must be avoided. In the future, | |
6166 | such constructs may be detected and treated as compilation errors. | |
6167 | ||
c1f7febf RK |
6168 | @node C++ Extensions |
6169 | @chapter Extensions to the C++ Language | |
6170 | @cindex extensions, C++ language | |
6171 | @cindex C++ language extensions | |
6172 | ||
6173 | The GNU compiler provides these extensions to the C++ language (and you | |
6174 | can also use most of the C language extensions in your C++ programs). If you | |
6175 | want to write code that checks whether these features are available, you can | |
6176 | test for the GNU compiler the same way as for C programs: check for a | |
6177 | predefined macro @code{__GNUC__}. You can also use @code{__GNUG__} to | |
6178 | test specifically for GNU C++ (@pxref{Standard Predefined,,Standard | |
6179 | Predefined Macros,cpp.info,The C Preprocessor}). | |
6180 | ||
6181 | @menu | |
c1f7febf | 6182 | * Min and Max:: C++ Minimum and maximum operators. |
02cac427 | 6183 | * Volatiles:: What constitutes an access to a volatile object. |
49419c8f | 6184 | * Restricted Pointers:: C99 restricted pointers and references. |
7a81cf7f | 6185 | * Vague Linkage:: Where G++ puts inlines, vtables and such. |
c1f7febf | 6186 | * C++ Interface:: You can use a single C++ header file for both |
e6f3b89d | 6187 | declarations and definitions. |
c1f7febf | 6188 | * Template Instantiation:: Methods for ensuring that exactly one copy of |
e6f3b89d | 6189 | each needed template instantiation is emitted. |
0ded1f18 JM |
6190 | * Bound member functions:: You can extract a function pointer to the |
6191 | method denoted by a @samp{->*} or @samp{.*} expression. | |
e6f3b89d | 6192 | * C++ Attributes:: Variable, function, and type attributes for C++ only. |
1f730ff7 | 6193 | * Java Exceptions:: Tweaking exception handling to work with Java. |
e6f3b89d PE |
6194 | * Deprecated Features:: Things might disappear from g++. |
6195 | * Backwards Compatibility:: Compatibilities with earlier definitions of C++. | |
c1f7febf RK |
6196 | @end menu |
6197 | ||
c1f7febf RK |
6198 | @node Min and Max |
6199 | @section Minimum and Maximum Operators in C++ | |
6200 | ||
6201 | It is very convenient to have operators which return the ``minimum'' or the | |
6202 | ``maximum'' of two arguments. In GNU C++ (but not in GNU C), | |
6203 | ||
6204 | @table @code | |
6205 | @item @var{a} <? @var{b} | |
6206 | @findex <? | |
6207 | @cindex minimum operator | |
6208 | is the @dfn{minimum}, returning the smaller of the numeric values | |
6209 | @var{a} and @var{b}; | |
6210 | ||
6211 | @item @var{a} >? @var{b} | |
6212 | @findex >? | |
6213 | @cindex maximum operator | |
6214 | is the @dfn{maximum}, returning the larger of the numeric values @var{a} | |
6215 | and @var{b}. | |
6216 | @end table | |
6217 | ||
6218 | These operations are not primitive in ordinary C++, since you can | |
6219 | use a macro to return the minimum of two things in C++, as in the | |
6220 | following example. | |
6221 | ||
6222 | @example | |
6223 | #define MIN(X,Y) ((X) < (Y) ? : (X) : (Y)) | |
6224 | @end example | |
6225 | ||
6226 | @noindent | |
6227 | You might then use @w{@samp{int min = MIN (i, j);}} to set @var{min} to | |
6228 | the minimum value of variables @var{i} and @var{j}. | |
6229 | ||
6230 | However, side effects in @code{X} or @code{Y} may cause unintended | |
6231 | behavior. For example, @code{MIN (i++, j++)} will fail, incrementing | |
6232 | the smaller counter twice. A GNU C extension allows you to write safe | |
6233 | macros that avoid this kind of problem (@pxref{Naming Types,,Naming an | |
6234 | Expression's Type}). However, writing @code{MIN} and @code{MAX} as | |
6235 | macros also forces you to use function-call notation for a | |
6236 | fundamental arithmetic operation. Using GNU C++ extensions, you can | |
6237 | write @w{@samp{int min = i <? j;}} instead. | |
6238 | ||
6239 | Since @code{<?} and @code{>?} are built into the compiler, they properly | |
6240 | handle expressions with side-effects; @w{@samp{int min = i++ <? j++;}} | |
6241 | works correctly. | |
6242 | ||
02cac427 NS |
6243 | @node Volatiles |
6244 | @section When is a Volatile Object Accessed? | |
6245 | @cindex accessing volatiles | |
6246 | @cindex volatile read | |
6247 | @cindex volatile write | |
6248 | @cindex volatile access | |
6249 | ||
767094dd JM |
6250 | Both the C and C++ standard have the concept of volatile objects. These |
6251 | are normally accessed by pointers and used for accessing hardware. The | |
8117da65 | 6252 | standards encourage compilers to refrain from optimizations |
02cac427 | 6253 | concerning accesses to volatile objects that it might perform on |
767094dd JM |
6254 | non-volatile objects. The C standard leaves it implementation defined |
6255 | as to what constitutes a volatile access. The C++ standard omits to | |
02cac427 | 6256 | specify this, except to say that C++ should behave in a similar manner |
767094dd | 6257 | to C with respect to volatiles, where possible. The minimum either |
8117da65 | 6258 | standard specifies is that at a sequence point all previous accesses to |
02cac427 | 6259 | volatile objects have stabilized and no subsequent accesses have |
767094dd | 6260 | occurred. Thus an implementation is free to reorder and combine |
02cac427 | 6261 | volatile accesses which occur between sequence points, but cannot do so |
767094dd | 6262 | for accesses across a sequence point. The use of volatiles does not |
02cac427 NS |
6263 | allow you to violate the restriction on updating objects multiple times |
6264 | within a sequence point. | |
6265 | ||
6266 | In most expressions, it is intuitively obvious what is a read and what is | |
767094dd | 6267 | a write. For instance |
02cac427 NS |
6268 | |
6269 | @example | |
c771326b JM |
6270 | volatile int *dst = @var{somevalue}; |
6271 | volatile int *src = @var{someothervalue}; | |
02cac427 NS |
6272 | *dst = *src; |
6273 | @end example | |
6274 | ||
6275 | @noindent | |
6276 | will cause a read of the volatile object pointed to by @var{src} and stores the | |
767094dd | 6277 | value into the volatile object pointed to by @var{dst}. There is no |
02cac427 NS |
6278 | guarantee that these reads and writes are atomic, especially for objects |
6279 | larger than @code{int}. | |
6280 | ||
6281 | Less obvious expressions are where something which looks like an access | |
767094dd | 6282 | is used in a void context. An example would be, |
02cac427 NS |
6283 | |
6284 | @example | |
c771326b | 6285 | volatile int *src = @var{somevalue}; |
02cac427 NS |
6286 | *src; |
6287 | @end example | |
6288 | ||
6289 | With C, such expressions are rvalues, and as rvalues cause a read of | |
f0523f02 | 6290 | the object, GCC interprets this as a read of the volatile being pointed |
767094dd | 6291 | to. The C++ standard specifies that such expressions do not undergo |
02cac427 | 6292 | lvalue to rvalue conversion, and that the type of the dereferenced |
767094dd | 6293 | object may be incomplete. The C++ standard does not specify explicitly |
02cac427 | 6294 | that it is this lvalue to rvalue conversion which is responsible for |
767094dd JM |
6295 | causing an access. However, there is reason to believe that it is, |
6296 | because otherwise certain simple expressions become undefined. However, | |
f0523f02 | 6297 | because it would surprise most programmers, G++ treats dereferencing a |
02cac427 | 6298 | pointer to volatile object of complete type in a void context as a read |
767094dd | 6299 | of the object. When the object has incomplete type, G++ issues a |
02cac427 NS |
6300 | warning. |
6301 | ||
6302 | @example | |
6303 | struct S; | |
6304 | struct T @{int m;@}; | |
c771326b JM |
6305 | volatile S *ptr1 = @var{somevalue}; |
6306 | volatile T *ptr2 = @var{somevalue}; | |
02cac427 NS |
6307 | *ptr1; |
6308 | *ptr2; | |
6309 | @end example | |
6310 | ||
6311 | In this example, a warning is issued for @code{*ptr1}, and @code{*ptr2} | |
767094dd | 6312 | causes a read of the object pointed to. If you wish to force an error on |
02cac427 NS |
6313 | the first case, you must force a conversion to rvalue with, for instance |
6314 | a static cast, @code{static_cast<S>(*ptr1)}. | |
6315 | ||
f0523f02 | 6316 | When using a reference to volatile, G++ does not treat equivalent |
02cac427 | 6317 | expressions as accesses to volatiles, but instead issues a warning that |
767094dd | 6318 | no volatile is accessed. The rationale for this is that otherwise it |
02cac427 NS |
6319 | becomes difficult to determine where volatile access occur, and not |
6320 | possible to ignore the return value from functions returning volatile | |
767094dd | 6321 | references. Again, if you wish to force a read, cast the reference to |
02cac427 NS |
6322 | an rvalue. |
6323 | ||
535233a8 NS |
6324 | @node Restricted Pointers |
6325 | @section Restricting Pointer Aliasing | |
6326 | @cindex restricted pointers | |
6327 | @cindex restricted references | |
6328 | @cindex restricted this pointer | |
6329 | ||
49419c8f | 6330 | As with gcc, g++ understands the C99 feature of restricted pointers, |
535233a8 | 6331 | specified with the @code{__restrict__}, or @code{__restrict} type |
767094dd | 6332 | qualifier. Because you cannot compile C++ by specifying the @option{-std=c99} |
535233a8 NS |
6333 | language flag, @code{restrict} is not a keyword in C++. |
6334 | ||
6335 | In addition to allowing restricted pointers, you can specify restricted | |
6336 | references, which indicate that the reference is not aliased in the local | |
6337 | context. | |
6338 | ||
6339 | @example | |
6340 | void fn (int *__restrict__ rptr, int &__restrict__ rref) | |
6341 | @{ | |
6342 | @dots{} | |
6343 | @} | |
6344 | @end example | |
6345 | ||
6346 | @noindent | |
6347 | In the body of @code{fn}, @var{rptr} points to an unaliased integer and | |
6348 | @var{rref} refers to a (different) unaliased integer. | |
6349 | ||
6350 | You may also specify whether a member function's @var{this} pointer is | |
6351 | unaliased by using @code{__restrict__} as a member function qualifier. | |
6352 | ||
6353 | @example | |
6354 | void T::fn () __restrict__ | |
6355 | @{ | |
6356 | @dots{} | |
6357 | @} | |
6358 | @end example | |
6359 | ||
6360 | @noindent | |
6361 | Within the body of @code{T::fn}, @var{this} will have the effective | |
767094dd | 6362 | definition @code{T *__restrict__ const this}. Notice that the |
535233a8 NS |
6363 | interpretation of a @code{__restrict__} member function qualifier is |
6364 | different to that of @code{const} or @code{volatile} qualifier, in that it | |
767094dd | 6365 | is applied to the pointer rather than the object. This is consistent with |
535233a8 NS |
6366 | other compilers which implement restricted pointers. |
6367 | ||
6368 | As with all outermost parameter qualifiers, @code{__restrict__} is | |
767094dd | 6369 | ignored in function definition matching. This means you only need to |
535233a8 NS |
6370 | specify @code{__restrict__} in a function definition, rather than |
6371 | in a function prototype as well. | |
6372 | ||
7a81cf7f JM |
6373 | @node Vague Linkage |
6374 | @section Vague Linkage | |
6375 | @cindex vague linkage | |
6376 | ||
6377 | There are several constructs in C++ which require space in the object | |
6378 | file but are not clearly tied to a single translation unit. We say that | |
6379 | these constructs have ``vague linkage''. Typically such constructs are | |
6380 | emitted wherever they are needed, though sometimes we can be more | |
6381 | clever. | |
6382 | ||
6383 | @table @asis | |
6384 | @item Inline Functions | |
6385 | Inline functions are typically defined in a header file which can be | |
6386 | included in many different compilations. Hopefully they can usually be | |
6387 | inlined, but sometimes an out-of-line copy is necessary, if the address | |
6388 | of the function is taken or if inlining fails. In general, we emit an | |
6389 | out-of-line copy in all translation units where one is needed. As an | |
6390 | exception, we only emit inline virtual functions with the vtable, since | |
6391 | it will always require a copy. | |
6392 | ||
6393 | Local static variables and string constants used in an inline function | |
6394 | are also considered to have vague linkage, since they must be shared | |
6395 | between all inlined and out-of-line instances of the function. | |
6396 | ||
6397 | @item VTables | |
6398 | @cindex vtable | |
6399 | C++ virtual functions are implemented in most compilers using a lookup | |
6400 | table, known as a vtable. The vtable contains pointers to the virtual | |
6401 | functions provided by a class, and each object of the class contains a | |
6402 | pointer to its vtable (or vtables, in some multiple-inheritance | |
6403 | situations). If the class declares any non-inline, non-pure virtual | |
6404 | functions, the first one is chosen as the ``key method'' for the class, | |
6405 | and the vtable is only emitted in the translation unit where the key | |
6406 | method is defined. | |
6407 | ||
6408 | @emph{Note:} If the chosen key method is later defined as inline, the | |
6409 | vtable will still be emitted in every translation unit which defines it. | |
6410 | Make sure that any inline virtuals are declared inline in the class | |
6411 | body, even if they are not defined there. | |
6412 | ||
6413 | @item type_info objects | |
6414 | @cindex type_info | |
6415 | @cindex RTTI | |
6416 | C++ requires information about types to be written out in order to | |
6417 | implement @samp{dynamic_cast}, @samp{typeid} and exception handling. | |
6418 | For polymorphic classes (classes with virtual functions), the type_info | |
6419 | object is written out along with the vtable so that @samp{dynamic_cast} | |
6420 | can determine the dynamic type of a class object at runtime. For all | |
6421 | other types, we write out the type_info object when it is used: when | |
6422 | applying @samp{typeid} to an expression, throwing an object, or | |
6423 | referring to a type in a catch clause or exception specification. | |
6424 | ||
6425 | @item Template Instantiations | |
6426 | Most everything in this section also applies to template instantiations, | |
6427 | but there are other options as well. | |
6428 | @xref{Template Instantiation,,Where's the Template?}. | |
6429 | ||
6430 | @end table | |
6431 | ||
6432 | When used with GNU ld version 2.8 or later on an ELF system such as | |
6433 | Linux/GNU or Solaris 2, or on Microsoft Windows, duplicate copies of | |
6434 | these constructs will be discarded at link time. This is known as | |
6435 | COMDAT support. | |
6436 | ||
6437 | On targets that don't support COMDAT, but do support weak symbols, GCC | |
6438 | will use them. This way one copy will override all the others, but | |
6439 | the unused copies will still take up space in the executable. | |
6440 | ||
6441 | For targets which do not support either COMDAT or weak symbols, | |
6442 | most entities with vague linkage will be emitted as local symbols to | |
6443 | avoid duplicate definition errors from the linker. This will not happen | |
6444 | for local statics in inlines, however, as having multiple copies will | |
6445 | almost certainly break things. | |
6446 | ||
6447 | @xref{C++ Interface,,Declarations and Definitions in One Header}, for | |
6448 | another way to control placement of these constructs. | |
6449 | ||
c1f7febf RK |
6450 | @node C++ Interface |
6451 | @section Declarations and Definitions in One Header | |
6452 | ||
6453 | @cindex interface and implementation headers, C++ | |
6454 | @cindex C++ interface and implementation headers | |
6455 | C++ object definitions can be quite complex. In principle, your source | |
6456 | code will need two kinds of things for each object that you use across | |
6457 | more than one source file. First, you need an @dfn{interface} | |
6458 | specification, describing its structure with type declarations and | |
6459 | function prototypes. Second, you need the @dfn{implementation} itself. | |
6460 | It can be tedious to maintain a separate interface description in a | |
6461 | header file, in parallel to the actual implementation. It is also | |
6462 | dangerous, since separate interface and implementation definitions may | |
6463 | not remain parallel. | |
6464 | ||
6465 | @cindex pragmas, interface and implementation | |
6466 | With GNU C++, you can use a single header file for both purposes. | |
6467 | ||
6468 | @quotation | |
6469 | @emph{Warning:} The mechanism to specify this is in transition. For the | |
6470 | nonce, you must use one of two @code{#pragma} commands; in a future | |
6471 | release of GNU C++, an alternative mechanism will make these | |
6472 | @code{#pragma} commands unnecessary. | |
6473 | @end quotation | |
6474 | ||
6475 | The header file contains the full definitions, but is marked with | |
6476 | @samp{#pragma interface} in the source code. This allows the compiler | |
6477 | to use the header file only as an interface specification when ordinary | |
6478 | source files incorporate it with @code{#include}. In the single source | |
6479 | file where the full implementation belongs, you can use either a naming | |
6480 | convention or @samp{#pragma implementation} to indicate this alternate | |
6481 | use of the header file. | |
6482 | ||
6483 | @table @code | |
6484 | @item #pragma interface | |
6485 | @itemx #pragma interface "@var{subdir}/@var{objects}.h" | |
6486 | @kindex #pragma interface | |
6487 | Use this directive in @emph{header files} that define object classes, to save | |
6488 | space in most of the object files that use those classes. Normally, | |
6489 | local copies of certain information (backup copies of inline member | |
6490 | functions, debugging information, and the internal tables that implement | |
6491 | virtual functions) must be kept in each object file that includes class | |
6492 | definitions. You can use this pragma to avoid such duplication. When a | |
6493 | header file containing @samp{#pragma interface} is included in a | |
6494 | compilation, this auxiliary information will not be generated (unless | |
6495 | the main input source file itself uses @samp{#pragma implementation}). | |
6496 | Instead, the object files will contain references to be resolved at link | |
6497 | time. | |
6498 | ||
6499 | The second form of this directive is useful for the case where you have | |
6500 | multiple headers with the same name in different directories. If you | |
6501 | use this form, you must specify the same string to @samp{#pragma | |
6502 | implementation}. | |
6503 | ||
6504 | @item #pragma implementation | |
6505 | @itemx #pragma implementation "@var{objects}.h" | |
6506 | @kindex #pragma implementation | |
6507 | Use this pragma in a @emph{main input file}, when you want full output from | |
6508 | included header files to be generated (and made globally visible). The | |
6509 | included header file, in turn, should use @samp{#pragma interface}. | |
6510 | Backup copies of inline member functions, debugging information, and the | |
6511 | internal tables used to implement virtual functions are all generated in | |
6512 | implementation files. | |
6513 | ||
6514 | @cindex implied @code{#pragma implementation} | |
6515 | @cindex @code{#pragma implementation}, implied | |
6516 | @cindex naming convention, implementation headers | |
6517 | If you use @samp{#pragma implementation} with no argument, it applies to | |
6518 | an include file with the same basename@footnote{A file's @dfn{basename} | |
6519 | was the name stripped of all leading path information and of trailing | |
6520 | suffixes, such as @samp{.h} or @samp{.C} or @samp{.cc}.} as your source | |
6521 | file. For example, in @file{allclass.cc}, giving just | |
6522 | @samp{#pragma implementation} | |
6523 | by itself is equivalent to @samp{#pragma implementation "allclass.h"}. | |
6524 | ||
6525 | In versions of GNU C++ prior to 2.6.0 @file{allclass.h} was treated as | |
6526 | an implementation file whenever you would include it from | |
6527 | @file{allclass.cc} even if you never specified @samp{#pragma | |
6528 | implementation}. This was deemed to be more trouble than it was worth, | |
6529 | however, and disabled. | |
6530 | ||
6531 | If you use an explicit @samp{#pragma implementation}, it must appear in | |
6532 | your source file @emph{before} you include the affected header files. | |
6533 | ||
6534 | Use the string argument if you want a single implementation file to | |
6535 | include code from multiple header files. (You must also use | |
6536 | @samp{#include} to include the header file; @samp{#pragma | |
6537 | implementation} only specifies how to use the file---it doesn't actually | |
6538 | include it.) | |
6539 | ||
6540 | There is no way to split up the contents of a single header file into | |
6541 | multiple implementation files. | |
6542 | @end table | |
6543 | ||
6544 | @cindex inlining and C++ pragmas | |
6545 | @cindex C++ pragmas, effect on inlining | |
6546 | @cindex pragmas in C++, effect on inlining | |
6547 | @samp{#pragma implementation} and @samp{#pragma interface} also have an | |
6548 | effect on function inlining. | |
6549 | ||
6550 | If you define a class in a header file marked with @samp{#pragma | |
6551 | interface}, the effect on a function defined in that class is similar to | |
6552 | an explicit @code{extern} declaration---the compiler emits no code at | |
6553 | all to define an independent version of the function. Its definition | |
6554 | is used only for inlining with its callers. | |
6555 | ||
84330467 | 6556 | @opindex fno-implement-inlines |
c1f7febf RK |
6557 | Conversely, when you include the same header file in a main source file |
6558 | that declares it as @samp{#pragma implementation}, the compiler emits | |
6559 | code for the function itself; this defines a version of the function | |
6560 | that can be found via pointers (or by callers compiled without | |
6561 | inlining). If all calls to the function can be inlined, you can avoid | |
84330467 | 6562 | emitting the function by compiling with @option{-fno-implement-inlines}. |
c1f7febf RK |
6563 | If any calls were not inlined, you will get linker errors. |
6564 | ||
6565 | @node Template Instantiation | |
6566 | @section Where's the Template? | |
6567 | ||
6568 | @cindex template instantiation | |
6569 | ||
6570 | C++ templates are the first language feature to require more | |
6571 | intelligence from the environment than one usually finds on a UNIX | |
6572 | system. Somehow the compiler and linker have to make sure that each | |
6573 | template instance occurs exactly once in the executable if it is needed, | |
6574 | and not at all otherwise. There are two basic approaches to this | |
6575 | problem, which I will refer to as the Borland model and the Cfront model. | |
6576 | ||
6577 | @table @asis | |
6578 | @item Borland model | |
6579 | Borland C++ solved the template instantiation problem by adding the code | |
469b759e JM |
6580 | equivalent of common blocks to their linker; the compiler emits template |
6581 | instances in each translation unit that uses them, and the linker | |
6582 | collapses them together. The advantage of this model is that the linker | |
6583 | only has to consider the object files themselves; there is no external | |
6584 | complexity to worry about. This disadvantage is that compilation time | |
6585 | is increased because the template code is being compiled repeatedly. | |
6586 | Code written for this model tends to include definitions of all | |
6587 | templates in the header file, since they must be seen to be | |
6588 | instantiated. | |
c1f7febf RK |
6589 | |
6590 | @item Cfront model | |
6591 | The AT&T C++ translator, Cfront, solved the template instantiation | |
6592 | problem by creating the notion of a template repository, an | |
469b759e JM |
6593 | automatically maintained place where template instances are stored. A |
6594 | more modern version of the repository works as follows: As individual | |
6595 | object files are built, the compiler places any template definitions and | |
6596 | instantiations encountered in the repository. At link time, the link | |
6597 | wrapper adds in the objects in the repository and compiles any needed | |
6598 | instances that were not previously emitted. The advantages of this | |
6599 | model are more optimal compilation speed and the ability to use the | |
6600 | system linker; to implement the Borland model a compiler vendor also | |
c1f7febf | 6601 | needs to replace the linker. The disadvantages are vastly increased |
469b759e JM |
6602 | complexity, and thus potential for error; for some code this can be |
6603 | just as transparent, but in practice it can been very difficult to build | |
c1f7febf | 6604 | multiple programs in one directory and one program in multiple |
469b759e JM |
6605 | directories. Code written for this model tends to separate definitions |
6606 | of non-inline member templates into a separate file, which should be | |
6607 | compiled separately. | |
c1f7febf RK |
6608 | @end table |
6609 | ||
469b759e | 6610 | When used with GNU ld version 2.8 or later on an ELF system such as |
a4b3b54a JM |
6611 | Linux/GNU or Solaris 2, or on Microsoft Windows, g++ supports the |
6612 | Borland model. On other systems, g++ implements neither automatic | |
6613 | model. | |
469b759e JM |
6614 | |
6615 | A future version of g++ will support a hybrid model whereby the compiler | |
6616 | will emit any instantiations for which the template definition is | |
6617 | included in the compile, and store template definitions and | |
6618 | instantiation context information into the object file for the rest. | |
6619 | The link wrapper will extract that information as necessary and invoke | |
6620 | the compiler to produce the remaining instantiations. The linker will | |
6621 | then combine duplicate instantiations. | |
6622 | ||
6623 | In the mean time, you have the following options for dealing with | |
6624 | template instantiations: | |
c1f7febf RK |
6625 | |
6626 | @enumerate | |
d863830b | 6627 | @item |
84330467 JM |
6628 | @opindex frepo |
6629 | Compile your template-using code with @option{-frepo}. The compiler will | |
d863830b JL |
6630 | generate files with the extension @samp{.rpo} listing all of the |
6631 | template instantiations used in the corresponding object files which | |
6632 | could be instantiated there; the link wrapper, @samp{collect2}, will | |
6633 | then update the @samp{.rpo} files to tell the compiler where to place | |
6634 | those instantiations and rebuild any affected object files. The | |
6635 | link-time overhead is negligible after the first pass, as the compiler | |
6636 | will continue to place the instantiations in the same files. | |
6637 | ||
6638 | This is your best option for application code written for the Borland | |
6639 | model, as it will just work. Code written for the Cfront model will | |
6640 | need to be modified so that the template definitions are available at | |
6641 | one or more points of instantiation; usually this is as simple as adding | |
6642 | @code{#include <tmethods.cc>} to the end of each template header. | |
6643 | ||
6644 | For library code, if you want the library to provide all of the template | |
6645 | instantiations it needs, just try to link all of its object files | |
6646 | together; the link will fail, but cause the instantiations to be | |
6647 | generated as a side effect. Be warned, however, that this may cause | |
6648 | conflicts if multiple libraries try to provide the same instantiations. | |
6649 | For greater control, use explicit instantiation as described in the next | |
6650 | option. | |
6651 | ||
c1f7febf | 6652 | @item |
84330467 JM |
6653 | @opindex fno-implicit-templates |
6654 | Compile your code with @option{-fno-implicit-templates} to disable the | |
c1f7febf RK |
6655 | implicit generation of template instances, and explicitly instantiate |
6656 | all the ones you use. This approach requires more knowledge of exactly | |
6657 | which instances you need than do the others, but it's less | |
6658 | mysterious and allows greater control. You can scatter the explicit | |
6659 | instantiations throughout your program, perhaps putting them in the | |
6660 | translation units where the instances are used or the translation units | |
6661 | that define the templates themselves; you can put all of the explicit | |
6662 | instantiations you need into one big file; or you can create small files | |
6663 | like | |
6664 | ||
6665 | @example | |
6666 | #include "Foo.h" | |
6667 | #include "Foo.cc" | |
6668 | ||
6669 | template class Foo<int>; | |
6670 | template ostream& operator << | |
6671 | (ostream&, const Foo<int>&); | |
6672 | @end example | |
6673 | ||
6674 | for each of the instances you need, and create a template instantiation | |
6675 | library from those. | |
6676 | ||
6677 | If you are using Cfront-model code, you can probably get away with not | |
84330467 | 6678 | using @option{-fno-implicit-templates} when compiling files that don't |
c1f7febf RK |
6679 | @samp{#include} the member template definitions. |
6680 | ||
6681 | If you use one big file to do the instantiations, you may want to | |
84330467 | 6682 | compile it without @option{-fno-implicit-templates} so you get all of the |
c1f7febf RK |
6683 | instances required by your explicit instantiations (but not by any |
6684 | other files) without having to specify them as well. | |
6685 | ||
6686 | g++ has extended the template instantiation syntax outlined in the | |
03d0f4af | 6687 | Working Paper to allow forward declaration of explicit instantiations |
4003d7f9 | 6688 | (with @code{extern}), instantiation of the compiler support data for a |
e979f9e8 | 6689 | template class (i.e.@: the vtable) without instantiating any of its |
4003d7f9 JM |
6690 | members (with @code{inline}), and instantiation of only the static data |
6691 | members of a template class, without the support data or member | |
6692 | functions (with (@code{static}): | |
c1f7febf RK |
6693 | |
6694 | @example | |
6695 | extern template int max (int, int); | |
c1f7febf | 6696 | inline template class Foo<int>; |
4003d7f9 | 6697 | static template class Foo<int>; |
c1f7febf RK |
6698 | @end example |
6699 | ||
6700 | @item | |
6701 | Do nothing. Pretend g++ does implement automatic instantiation | |
6702 | management. Code written for the Borland model will work fine, but | |
6703 | each translation unit will contain instances of each of the templates it | |
6704 | uses. In a large program, this can lead to an unacceptable amount of code | |
6705 | duplication. | |
6706 | ||
6707 | @item | |
84330467 | 6708 | @opindex fexternal-templates |
c1f7febf RK |
6709 | Add @samp{#pragma interface} to all files containing template |
6710 | definitions. For each of these files, add @samp{#pragma implementation | |
6711 | "@var{filename}"} to the top of some @samp{.C} file which | |
6712 | @samp{#include}s it. Then compile everything with | |
84330467 | 6713 | @option{-fexternal-templates}. The templates will then only be expanded |
e979f9e8 | 6714 | in the translation unit which implements them (i.e.@: has a @samp{#pragma |
c1f7febf RK |
6715 | implementation} line for the file where they live); all other files will |
6716 | use external references. If you're lucky, everything should work | |
6717 | properly. If you get undefined symbol errors, you need to make sure | |
6718 | that each template instance which is used in the program is used in the | |
6719 | file which implements that template. If you don't have any use for a | |
6720 | particular instance in that file, you can just instantiate it | |
6721 | explicitly, using the syntax from the latest C++ working paper: | |
6722 | ||
6723 | @example | |
6724 | template class A<int>; | |
6725 | template ostream& operator << (ostream&, const A<int>&); | |
6726 | @end example | |
6727 | ||
6728 | This strategy will work with code written for either model. If you are | |
6729 | using code written for the Cfront model, the file containing a class | |
6730 | template and the file containing its member templates should be | |
6731 | implemented in the same translation unit. | |
6732 | ||
9c34dbbf | 6733 | @item |
84330467 | 6734 | @opindex falt-external-templates |
9c34dbbf ZW |
6735 | A slight variation on this approach is to use the flag |
6736 | @option{-falt-external-templates} instead. This flag causes template | |
c1f7febf RK |
6737 | instances to be emitted in the translation unit that implements the |
6738 | header where they are first instantiated, rather than the one which | |
6739 | implements the file where the templates are defined. This header must | |
6740 | be the same in all translation units, or things are likely to break. | |
6741 | ||
6742 | @xref{C++ Interface,,Declarations and Definitions in One Header}, for | |
6743 | more discussion of these pragmas. | |
6744 | @end enumerate | |
6745 | ||
0ded1f18 JM |
6746 | @node Bound member functions |
6747 | @section Extracting the function pointer from a bound pointer to member function | |
6748 | ||
6749 | @cindex pmf | |
6750 | @cindex pointer to member function | |
6751 | @cindex bound pointer to member function | |
6752 | ||
6753 | In C++, pointer to member functions (PMFs) are implemented using a wide | |
6754 | pointer of sorts to handle all the possible call mechanisms; the PMF | |
6755 | needs to store information about how to adjust the @samp{this} pointer, | |
6756 | and if the function pointed to is virtual, where to find the vtable, and | |
6757 | where in the vtable to look for the member function. If you are using | |
6758 | PMFs in an inner loop, you should really reconsider that decision. If | |
6759 | that is not an option, you can extract the pointer to the function that | |
6760 | would be called for a given object/PMF pair and call it directly inside | |
6761 | the inner loop, to save a bit of time. | |
6762 | ||
6763 | Note that you will still be paying the penalty for the call through a | |
6764 | function pointer; on most modern architectures, such a call defeats the | |
161d7b59 | 6765 | branch prediction features of the CPU@. This is also true of normal |
0ded1f18 JM |
6766 | virtual function calls. |
6767 | ||
6768 | The syntax for this extension is | |
6769 | ||
6770 | @example | |
6771 | extern A a; | |
6772 | extern int (A::*fp)(); | |
6773 | typedef int (*fptr)(A *); | |
6774 | ||
6775 | fptr p = (fptr)(a.*fp); | |
6776 | @end example | |
6777 | ||
e979f9e8 | 6778 | For PMF constants (i.e.@: expressions of the form @samp{&Klasse::Member}), |
767094dd | 6779 | no object is needed to obtain the address of the function. They can be |
0fb6bbf5 ML |
6780 | converted to function pointers directly: |
6781 | ||
6782 | @example | |
6783 | fptr p1 = (fptr)(&A::foo); | |
6784 | @end example | |
6785 | ||
84330467 JM |
6786 | @opindex Wno-pmf-conversions |
6787 | You must specify @option{-Wno-pmf-conversions} to use this extension. | |
0ded1f18 | 6788 | |
5c25e11d PE |
6789 | @node C++ Attributes |
6790 | @section C++-Specific Variable, Function, and Type Attributes | |
6791 | ||
6792 | Some attributes only make sense for C++ programs. | |
6793 | ||
6794 | @table @code | |
6795 | @item init_priority (@var{priority}) | |
6796 | @cindex init_priority attribute | |
6797 | ||
6798 | ||
6799 | In Standard C++, objects defined at namespace scope are guaranteed to be | |
6800 | initialized in an order in strict accordance with that of their definitions | |
6801 | @emph{in a given translation unit}. No guarantee is made for initializations | |
6802 | across translation units. However, GNU C++ allows users to control the | |
3844cd2e | 6803 | order of initialization of objects defined at namespace scope with the |
5c25e11d PE |
6804 | @code{init_priority} attribute by specifying a relative @var{priority}, |
6805 | a constant integral expression currently bounded between 101 and 65535 | |
6806 | inclusive. Lower numbers indicate a higher priority. | |
6807 | ||
6808 | In the following example, @code{A} would normally be created before | |
6809 | @code{B}, but the @code{init_priority} attribute has reversed that order: | |
6810 | ||
6811 | @example | |
6812 | Some_Class A __attribute__ ((init_priority (2000))); | |
6813 | Some_Class B __attribute__ ((init_priority (543))); | |
6814 | @end example | |
6815 | ||
6816 | @noindent | |
6817 | Note that the particular values of @var{priority} do not matter; only their | |
6818 | relative ordering. | |
6819 | ||
60c87482 BM |
6820 | @item java_interface |
6821 | @cindex java_interface attribute | |
6822 | ||
02f52e19 | 6823 | This type attribute informs C++ that the class is a Java interface. It may |
60c87482 | 6824 | only be applied to classes declared within an @code{extern "Java"} block. |
02f52e19 AJ |
6825 | Calls to methods declared in this interface will be dispatched using GCJ's |
6826 | interface table mechanism, instead of regular virtual table dispatch. | |
60c87482 | 6827 | |
5c25e11d PE |
6828 | @end table |
6829 | ||
1f730ff7 ZW |
6830 | @node Java Exceptions |
6831 | @section Java Exceptions | |
6832 | ||
6833 | The Java language uses a slightly different exception handling model | |
6834 | from C++. Normally, GNU C++ will automatically detect when you are | |
6835 | writing C++ code that uses Java exceptions, and handle them | |
6836 | appropriately. However, if C++ code only needs to execute destructors | |
6837 | when Java exceptions are thrown through it, GCC will guess incorrectly. | |
9c34dbbf | 6838 | Sample problematic code is: |
1f730ff7 ZW |
6839 | |
6840 | @example | |
6841 | struct S @{ ~S(); @}; | |
9c34dbbf | 6842 | extern void bar(); // is written in Java, and may throw exceptions |
1f730ff7 ZW |
6843 | void foo() |
6844 | @{ | |
6845 | S s; | |
6846 | bar(); | |
6847 | @} | |
6848 | @end example | |
6849 | ||
6850 | @noindent | |
6851 | The usual effect of an incorrect guess is a link failure, complaining of | |
6852 | a missing routine called @samp{__gxx_personality_v0}. | |
6853 | ||
6854 | You can inform the compiler that Java exceptions are to be used in a | |
6855 | translation unit, irrespective of what it might think, by writing | |
6856 | @samp{@w{#pragma GCC java_exceptions}} at the head of the file. This | |
6857 | @samp{#pragma} must appear before any functions that throw or catch | |
6858 | exceptions, or run destructors when exceptions are thrown through them. | |
6859 | ||
6860 | You cannot mix Java and C++ exceptions in the same translation unit. It | |
6861 | is believed to be safe to throw a C++ exception from one file through | |
9c34dbbf ZW |
6862 | another file compiled for the Java exception model, or vice versa, but |
6863 | there may be bugs in this area. | |
1f730ff7 | 6864 | |
e6f3b89d PE |
6865 | @node Deprecated Features |
6866 | @section Deprecated Features | |
6867 | ||
6868 | In the past, the GNU C++ compiler was extended to experiment with new | |
767094dd | 6869 | features, at a time when the C++ language was still evolving. Now that |
e6f3b89d | 6870 | the C++ standard is complete, some of those features are superseded by |
767094dd JM |
6871 | superior alternatives. Using the old features might cause a warning in |
6872 | some cases that the feature will be dropped in the future. In other | |
e6f3b89d PE |
6873 | cases, the feature might be gone already. |
6874 | ||
6875 | While the list below is not exhaustive, it documents some of the options | |
6876 | that are now deprecated: | |
6877 | ||
6878 | @table @code | |
6879 | @item -fexternal-templates | |
6880 | @itemx -falt-external-templates | |
6881 | These are two of the many ways for g++ to implement template | |
767094dd | 6882 | instantiation. @xref{Template Instantiation}. The C++ standard clearly |
e6f3b89d | 6883 | defines how template definitions have to be organized across |
767094dd | 6884 | implementation units. g++ has an implicit instantiation mechanism that |
e6f3b89d PE |
6885 | should work just fine for standard-conforming code. |
6886 | ||
6887 | @item -fstrict-prototype | |
6888 | @itemx -fno-strict-prototype | |
6889 | Previously it was possible to use an empty prototype parameter list to | |
6890 | indicate an unspecified number of parameters (like C), rather than no | |
767094dd | 6891 | parameters, as C++ demands. This feature has been removed, except where |
e6f3b89d PE |
6892 | it is required for backwards compatibility @xref{Backwards Compatibility}. |
6893 | @end table | |
6894 | ||
ad1a6d45 NS |
6895 | The named return value extension has been deprecated, and is now |
6896 | removed from g++. | |
e6f3b89d | 6897 | |
82c18d5c | 6898 | The use of initializer lists with new expressions has been deprecated, |
ad1a6d45 NS |
6899 | and is now removed from g++. |
6900 | ||
6901 | Floating and complex non-type template parameters have been deprecated, | |
6902 | and are now removed from g++. | |
6903 | ||
6904 | The implicit typename extension has been deprecated and will be removed | |
6905 | from g++ at some point. In some cases g++ determines that a dependant | |
6906 | type such as @code{TPL<T>::X} is a type without needing a | |
6907 | @code{typename} keyword, contrary to the standard. | |
82c18d5c | 6908 | |
e6f3b89d PE |
6909 | @node Backwards Compatibility |
6910 | @section Backwards Compatibility | |
6911 | @cindex Backwards Compatibility | |
6912 | @cindex ARM [Annotated C++ Reference Manual] | |
6913 | ||
aee96fe9 | 6914 | Now that there is a definitive ISO standard C++, G++ has a specification |
767094dd | 6915 | to adhere to. The C++ language evolved over time, and features that |
e6f3b89d | 6916 | used to be acceptable in previous drafts of the standard, such as the ARM |
767094dd | 6917 | [Annotated C++ Reference Manual], are no longer accepted. In order to allow |
aee96fe9 | 6918 | compilation of C++ written to such drafts, G++ contains some backwards |
767094dd | 6919 | compatibilities. @emph{All such backwards compatibility features are |
aee96fe9 | 6920 | liable to disappear in future versions of G++.} They should be considered |
e6f3b89d PE |
6921 | deprecated @xref{Deprecated Features}. |
6922 | ||
6923 | @table @code | |
6924 | @item For scope | |
6925 | If a variable is declared at for scope, it used to remain in scope until | |
6926 | the end of the scope which contained the for statement (rather than just | |
aee96fe9 | 6927 | within the for scope). G++ retains this, but issues a warning, if such a |
e6f3b89d PE |
6928 | variable is accessed outside the for scope. |
6929 | ||
ad1a6d45 | 6930 | @item Implicit C language |
630d3d5a | 6931 | Old C system header files did not contain an @code{extern "C" @{@dots{}@}} |
767094dd JM |
6932 | scope to set the language. On such systems, all header files are |
6933 | implicitly scoped inside a C language scope. Also, an empty prototype | |
e6f3b89d PE |
6934 | @code{()} will be treated as an unspecified number of arguments, rather |
6935 | than no arguments, as C++ demands. | |
6936 | @end table |