]>
Commit | Line | Data |
---|---|---|
7530d341 PK |
1 | /* |
2 | * Copyright 2011-2012 Freescale Semiconductor, Inc. | |
3 | * | |
1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
7530d341 PK |
5 | */ |
6 | ||
7 | /* | |
8 | * BSC9131 RDB board configuration file | |
9 | */ | |
10 | ||
11 | #ifndef __CONFIG_H | |
12 | #define __CONFIG_H | |
13 | ||
7530d341 | 14 | #define CONFIG_NAND_FSL_IFC |
7530d341 PK |
15 | |
16 | #ifdef CONFIG_SPIFLASH | |
17 | #define CONFIG_RAMBOOT_SPIFLASH | |
18 | #define CONFIG_SYS_RAMBOOT | |
19 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
20 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
e222b1f3 | 21 | #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
7530d341 PK |
22 | #endif |
23 | ||
f1593269 | 24 | #ifdef CONFIG_NAND |
f1593269 | 25 | #define CONFIG_SPL_INIT_MINIMAL |
fbe76ae4 | 26 | #define CONFIG_SPL_NAND_BOOT |
f1593269 PK |
27 | #define CONFIG_SPL_FLUSH_IMAGE |
28 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
29 | ||
30 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
31 | #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 | |
32 | #define CONFIG_SPL_MAX_SIZE 8192 | |
33 | #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 | |
34 | #define CONFIG_SPL_RELOC_STACK 0x00100000 | |
e222b1f3 | 35 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) |
f1593269 PK |
36 | #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) |
37 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
38 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 | |
39 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
7530d341 PK |
40 | #endif |
41 | ||
f1593269 PK |
42 | #ifdef CONFIG_SPL_BUILD |
43 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
44 | #else | |
45 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
46 | #endif | |
47 | ||
7530d341 | 48 | /* High Level Configuration Options */ |
7530d341 | 49 | |
7530d341 PK |
50 | #define CONFIG_TSEC_ENET |
51 | #define CONFIG_ENV_OVERWRITE | |
52 | ||
53 | #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */ | |
087cf44f PJ |
54 | #if defined(CONFIG_SYS_CLK_100) |
55 | #define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */ | |
56 | #else | |
7530d341 | 57 | #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */ |
087cf44f | 58 | #endif |
7530d341 PK |
59 | |
60 | #define CONFIG_HWCONFIG | |
61 | /* | |
62 | * These can be toggled for performance analysis, otherwise use default. | |
63 | */ | |
64 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
65 | #define CONFIG_BTB /* enable branch predition */ | |
66 | ||
67 | #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ | |
68 | #define CONFIG_SYS_MEMTEST_END 0x01ffffff | |
69 | ||
70 | /* DDR Setup */ | |
7530d341 PK |
71 | #undef CONFIG_SYS_DDR_RAW_TIMING |
72 | #undef CONFIG_DDR_SPD | |
73 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
74 | #define SPD_EEPROM_ADDRESS 0x52 /* I2C access */ | |
75 | ||
76 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
77 | ||
78 | #ifndef __ASSEMBLY__ | |
79 | extern unsigned long get_sdram_size(void); | |
80 | #endif | |
81 | #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ | |
82 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
83 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
84 | ||
7530d341 PK |
85 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
86 | #define CONFIG_CHIP_SELECTS_PER_CTRL 1 | |
87 | ||
88 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f | |
89 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 | |
90 | #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 | |
91 | ||
92 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
93 | #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 | |
94 | #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 | |
95 | #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 | |
96 | ||
97 | #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 | |
98 | #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 | |
99 | #define CONFIG_SYS_DDR_RCW_1 0x00000000 | |
100 | #define CONFIG_SYS_DDR_RCW_2 0x00000000 | |
101 | #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ | |
102 | #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 | |
103 | #define CONFIG_SYS_DDR_TIMING_4 0x00000001 | |
104 | #define CONFIG_SYS_DDR_TIMING_5 0x02401400 | |
105 | ||
106 | #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 | |
107 | #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 | |
108 | #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 | |
109 | #define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf | |
110 | #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 | |
111 | #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 | |
112 | #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 | |
113 | #define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 | |
114 | #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 | |
115 | ||
116 | /* | |
117 | * Base addresses -- Note these are effective addresses where the | |
118 | * actual resources get mapped (not physical addresses) | |
119 | */ | |
120 | /* relocated CCSRBAR */ | |
121 | #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT | |
122 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT | |
123 | ||
124 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ | |
125 | /* CONFIG_SYS_IMMR */ | |
765b0bdb PJ |
126 | /* DSP CCSRBAR */ |
127 | #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT | |
128 | #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT | |
7530d341 PK |
129 | |
130 | /* | |
131 | * Memory map | |
132 | * | |
133 | * 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable | |
134 | * 0x8800_0000 0x8810_0000 IFC internal SRAM 1M | |
765b0bdb | 135 | * 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M |
7530d341 PK |
136 | * 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M |
137 | * 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K | |
138 | * 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K | |
139 | * 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K | |
765b0bdb | 140 | * 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M |
7530d341 PK |
141 | * 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M |
142 | * 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M | |
143 | * | |
144 | */ | |
145 | ||
146 | /* | |
147 | * IFC Definitions | |
148 | */ | |
7530d341 PK |
149 | |
150 | /* NAND Flash on IFC */ | |
151 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
152 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
153 | ||
154 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
155 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \ | |
156 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
157 | | CSPR_V) | |
158 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
159 | ||
160 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
161 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
162 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
163 | | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ | |
164 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
165 | | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ | |
166 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
167 | ||
168 | /* NAND Flash Timing Params */ | |
4544fd29 PK |
169 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ |
170 | | FTIM0_NAND_TWP(0x05) \ | |
171 | | FTIM0_NAND_TWCHT(0x02) \ | |
7530d341 | 172 | | FTIM0_NAND_TWH(0x04)) |
4544fd29 PK |
173 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \ |
174 | | FTIM1_NAND_TWBE(0x1E) \ | |
175 | | FTIM1_NAND_TRR(0x07) \ | |
7530d341 PK |
176 | | FTIM1_NAND_TRP(0x05)) |
177 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ | |
178 | | FTIM2_NAND_TREH(0x04) \ | |
4544fd29 PK |
179 | | FTIM2_NAND_TWHRE(0x11)) |
180 | #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) | |
7530d341 PK |
181 | |
182 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
183 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
7530d341 PK |
184 | #define CONFIG_CMD_NAND |
185 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
186 | ||
187 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
188 | ||
189 | /* Set up IFC registers for boot location NAND */ | |
190 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
191 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
192 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
193 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
194 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
195 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
196 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
197 | ||
7530d341 PK |
198 | #define CONFIG_SYS_INIT_RAM_LOCK |
199 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ | |
b39d1213 | 200 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* End of used area in RAM */ |
7530d341 | 201 | |
b39d1213 | 202 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ |
7530d341 PK |
203 | - GENERATED_GBL_DATA_SIZE) |
204 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
205 | ||
9307cbab | 206 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
7530d341 PK |
207 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ |
208 | ||
209 | /* Serial Port */ | |
210 | #define CONFIG_CONS_INDEX 1 | |
211 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
7530d341 PK |
212 | #define CONFIG_SYS_NS16550_SERIAL |
213 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
214 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
f1593269 PK |
215 | #ifdef CONFIG_SPL_BUILD |
216 | #define CONFIG_NS16550_MIN_FUNCTIONS | |
217 | #endif | |
7530d341 | 218 | |
7530d341 PK |
219 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
220 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
221 | ||
222 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
223 | ||
00f792e0 HS |
224 | #define CONFIG_SYS_I2C |
225 | #define CONFIG_SYS_I2C_FSL | |
226 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
227 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
228 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
7530d341 PK |
229 | |
230 | /* I2C EEPROM */ | |
7530d341 PK |
231 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
232 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
233 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
234 | ||
7530d341 PK |
235 | /* eSPI - Enhanced SPI */ |
236 | #ifdef CONFIG_FSL_ESPI | |
7530d341 PK |
237 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
238 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
239 | #endif | |
240 | ||
241 | #if defined(CONFIG_TSEC_ENET) | |
242 | ||
243 | #define CONFIG_MII /* MII PHY management */ | |
244 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
245 | #define CONFIG_TSEC1 1 | |
246 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
247 | #define CONFIG_TSEC2 1 | |
248 | #define CONFIG_TSEC2_NAME "eTSEC2" | |
249 | ||
250 | #define TSEC1_PHY_ADDR 0 | |
251 | #define TSEC2_PHY_ADDR 3 | |
252 | ||
253 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
254 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
255 | ||
256 | #define TSEC1_PHYIDX 0 | |
257 | ||
258 | #define TSEC2_PHYIDX 0 | |
259 | ||
260 | #define CONFIG_ETHPRIME "eTSEC1" | |
261 | ||
262 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
263 | ||
264 | #endif /* CONFIG_TSEC_ENET */ | |
265 | ||
266 | /* | |
267 | * Environment | |
268 | */ | |
7530d341 PK |
269 | #if defined(CONFIG_RAMBOOT_SPIFLASH) |
270 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
271 | #define CONFIG_ENV_SPI_BUS 0 | |
272 | #define CONFIG_ENV_SPI_CS 0 | |
273 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
274 | #define CONFIG_ENV_SPI_MODE 0 | |
275 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
276 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
277 | #define CONFIG_ENV_SIZE 0x2000 | |
f1593269 PK |
278 | #elif defined(CONFIG_NAND) |
279 | #define CONFIG_ENV_IS_IN_NAND | |
280 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
281 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
e222b1f3 | 282 | #define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) |
f1593269 PK |
283 | #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) |
284 | #elif defined(CONFIG_SYS_RAMBOOT) | |
285 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ | |
7530d341 | 286 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) |
f1593269 | 287 | #define CONFIG_ENV_SIZE 0x2000 |
7530d341 PK |
288 | #endif |
289 | ||
290 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
291 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
292 | ||
293 | /* | |
294 | * Command line configuration. | |
295 | */ | |
7530d341 | 296 | #define CONFIG_CMD_REGINFO |
7530d341 PK |
297 | |
298 | /* | |
299 | * Miscellaneous configurable options | |
300 | */ | |
301 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
302 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
303 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
304 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
7530d341 PK |
305 | |
306 | #if defined(CONFIG_CMD_KGDB) | |
307 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
308 | #else | |
309 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
310 | #endif | |
311 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
312 | /* Print Buffer Size */ | |
313 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
314 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
7530d341 PK |
315 | |
316 | /* | |
317 | * For booting Linux, the board info and command line data | |
318 | * have to be in the first 64 MB of memory, since this is | |
319 | * the maximum mapped by the Linux kernel during initialization. | |
320 | */ | |
321 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ | |
322 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
323 | ||
324 | #if defined(CONFIG_CMD_KGDB) | |
325 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
7530d341 PK |
326 | #endif |
327 | ||
8850c5d5 | 328 | #ifdef CONFIG_USB_EHCI_HCD |
7530d341 PK |
329 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
330 | #define CONFIG_USB_EHCI_FSL | |
7530d341 PK |
331 | #define CONFIG_HAS_FSL_DR_USB |
332 | #endif | |
333 | ||
7ac1a24a AK |
334 | /* |
335 | * Dynamic MTD Partition support with mtdparts | |
336 | */ | |
337 | #define CONFIG_MTD_DEVICE | |
338 | #define CONFIG_MTD_PARTITIONS | |
339 | #define CONFIG_CMD_MTDPARTS | |
340 | #define MTDIDS_DEFAULT "nand0=ff800000.flash," | |
341 | #define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \ | |
342 | "8m(kernel),512k(dtb),-(fs)" | |
7ac1a24a | 343 | |
7530d341 PK |
344 | /* |
345 | * Environment Configuration | |
346 | */ | |
347 | ||
348 | #if defined(CONFIG_TSEC_ENET) | |
349 | #define CONFIG_HAS_ETH0 | |
350 | #endif | |
351 | ||
352 | #define CONFIG_HOSTNAME BSC9131rdb | |
353 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
354 | #define CONFIG_BOOTFILE "uImage" | |
355 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ | |
356 | ||
7530d341 PK |
357 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
358 | "netdev=eth0\0" \ | |
359 | "uboot=" CONFIG_UBOOTPATH "\0" \ | |
360 | "loadaddr=1000000\0" \ | |
361 | "bootfile=uImage\0" \ | |
362 | "consoledev=ttyS0\0" \ | |
363 | "ramdiskaddr=2000000\0" \ | |
364 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
b24a4f62 | 365 | "fdtaddr=1e00000\0" \ |
7530d341 PK |
366 | "fdtfile=bsc9131rdb.dtb\0" \ |
367 | "bdev=sda1\0" \ | |
368 | "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ | |
1d2949ae PJ |
369 | "bootm_size=0x37000000\0" \ |
370 | "othbootargs=ramdisk_size=600000 " \ | |
371 | "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \ | |
7530d341 PK |
372 | "usbext2boot=setenv bootargs root=/dev/ram rw " \ |
373 | "console=$consoledev,$baudrate $othbootargs; " \ | |
374 | "usb start;" \ | |
375 | "ext2load usb 0:4 $loadaddr $bootfile;" \ | |
376 | "ext2load usb 0:4 $fdtaddr $fdtfile;" \ | |
377 | "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ | |
378 | "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ | |
379 | ||
380 | #define CONFIG_RAMBOOTCOMMAND \ | |
381 | "setenv bootargs root=/dev/ram rw " \ | |
382 | "console=$consoledev,$baudrate $othbootargs; " \ | |
383 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
384 | "tftp $loadaddr $bootfile;" \ | |
385 | "tftp $fdtaddr $fdtfile;" \ | |
386 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
387 | ||
388 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
389 | ||
390 | #endif /* __CONFIG_H */ |