[people/ms/u-boot.git] / include / configs / BSC9131RDB.h

/*
 * Copyright 2011-2012 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * BSC9131 RDB board configuration file
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_BOARDINFO

#ifdef CONFIG_BSC9131RDB
#define CONFIG_BSC9131
#define CONFIG_NAND_FSL_IFC
#endif

#ifdef CONFIG_SPIFLASH
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_SYS_TEXT_BASE		0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
#endif

#ifdef CONFIG_NAND
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"

#define CONFIG_SYS_TEXT_BASE		0x00201000
#define CONFIG_SPL_TEXT_BASE		0xFFFFE000
#define CONFIG_SPL_MAX_SIZE		8192
#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
#define CONFIG_SPL_RELOC_STACK		0x00100000
#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)
#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#endif

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
#endif


/* High Level Configuration Options */
#define CONFIG_BOOKE			/* BOOKE */
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_FSL_IFC			/* Enable IFC Support */
#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */

#define CONFIG_FSL_LAW			/* Use common FSL init code */
#define CONFIG_TSEC_ENET
#define CONFIG_ENV_OVERWRITE

#define CONFIG_DDR_CLK_FREQ	66666666 /* DDRCLK on 9131 RDB */
#if defined(CONFIG_SYS_CLK_100)
#define CONFIG_SYS_CLK_FREQ    100000000 /* SYSCLK for 9131 RDB */
#else
#define CONFIG_SYS_CLK_FREQ	66666666 /* SYSCLK for 9131 RDB */
#endif

#define CONFIG_HWCONFIG
/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* enable branch predition */

#define CONFIG_SYS_MEMTEST_START	0x01000000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x01ffffff

/* DDR Setup */
#define CONFIG_SYS_FSL_DDR3
#undef CONFIG_SYS_DDR_RAW_TIMING
#undef CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM		0
#define SPD_EEPROM_ADDRESS		0x52 /* I2C access */

#define CONFIG_MEM_INIT_VALUE		0xDeadBeef

#ifndef __ASSEMBLY__
extern unsigned long get_sdram_size(void);
#endif
#define CONFIG_SYS_SDRAM_SIZE		get_sdram_size() /* DDR size */
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1

#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000

#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000

#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
#define CONFIG_SYS_DDR_RCW_1		0x00000000
#define CONFIG_SYS_DDR_RCW_2		0x00000000
#define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3	*/
#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
#define CONFIG_SYS_DDR_TIMING_4		0x00000001
#define CONFIG_SYS_DDR_TIMING_5		0x02401400

#define CONFIG_SYS_DDR_TIMING_3_800		0x00030000
#define CONFIG_SYS_DDR_TIMING_0_800		0x00110104
#define CONFIG_SYS_DDR_TIMING_1_800		0x6f6b8644
#define CONFIG_SYS_DDR_TIMING_2_800		0x0fa888cf
#define CONFIG_SYS_DDR_CLK_CTRL_800		0x03000000
#define CONFIG_SYS_DDR_MODE_1_800		0x00441420
#define CONFIG_SYS_DDR_MODE_2_800		0x8000c000
#define CONFIG_SYS_DDR_INTERVAL_800		0x0c300100
#define CONFIG_SYS_DDR_WRLVL_CONTROL_800	0x8675f608

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
/* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR	CONFIG_SYS_CCSRBAR_DEFAULT
#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR_DEFAULT

#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses */
							/* CONFIG_SYS_IMMR */
/* DSP CCSRBAR */
#define CONFIG_SYS_FSL_DSP_CCSRBAR	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT

/*
 * Memory map
 *
 * 0x0000_0000	0x3FFF_FFFF	DDR			1G cacheable
 * 0x8800_0000	0x8810_0000	IFC internal SRAM		1M
 * 0xB000_0000	0xB0FF_FFFF	DSP core M2 memory	16M
 * 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
 * 0xC1F0_0000	0xC1F3_FFFF	PA L2 SRAM Region 0	256K
 * 0xC1F8_0000	0xC1F9_FFFF	PA L2 SRAM Region 1	128K
 * 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
 * 0xFF60_0000	0xFF6F_FFFF	DSP CCSR		1M
 * 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
 * 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND flash buffer	8M
 *
 */

/*
 * IFC Definitions
 */
#define CONFIG_SYS_NO_FLASH

/* NAND Flash on IFC */
#define CONFIG_SYS_NAND_BASE		0xff800000
#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE

#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
				| CSPR_PORT_SIZE_8	/* Port Size = 8 bit*/ \
				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
				| CSPR_V)
#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)

#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
				| CSOR_NAND_RAL_2	/* RAL = 2Byes */ \
				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/

/* NAND Flash Timing Params */
#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x03)  \
					| FTIM0_NAND_TWP(0x05)   \
					| FTIM0_NAND_TWCHT(0x02) \
					| FTIM0_NAND_TWH(0x04))
#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x1C) \
					| FTIM1_NAND_TWBE(0x1E) \
					| FTIM1_NAND_TRR(0x07)  \
					| FTIM1_NAND_TRP(0x05))
#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x08)  \
					| FTIM2_NAND_TREH(0x04) \
					| FTIM2_NAND_TWHRE(0x11))
#define CONFIG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x04)

#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

#define CONFIG_SYS_NAND_DDR_LAW		11

/* Set up IFC registers for boot location NAND */
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3

#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_pre_init */

#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
#define CONFIG_SYS_INIT_RAM_END		0x00004000/* End of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
						- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/

/* Serial Port */
#define CONFIG_CONS_INDEX	1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif

#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000

/* I2C EEPROM */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5

#define CONFIG_CMD_I2C


#define CONFIG_FSL_ESPI
/* eSPI - Enhanced SPI */
#ifdef CONFIG_FSL_ESPI
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		10000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

#if defined(CONFIG_TSEC_ENET)

#define CONFIG_MII			/* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"eTSEC1"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"eTSEC2"

#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		3

#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX		0

#define TSEC2_PHYIDX		0

#define CONFIG_ETHPRIME		"eTSEC1"

#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */

#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS	0
#define CONFIG_ENV_SPI_CS	0
#define CONFIG_ENV_SPI_MAX_HZ	10000000
#define CONFIG_ENV_SPI_MODE	0
#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
#define CONFIG_ENV_SECT_SIZE	0x10000
#define CONFIG_ENV_SIZE		0x2000
#elif defined(CONFIG_NAND)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
#elif defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE		0x2000
#endif

#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change */

/*
 * Command line configuration.
 */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
						/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#endif

/* Hash command with SHA acceleration supported in hardware */
#ifdef CONFIG_FSL_CAAM
#define CONFIG_CMD_HASH
#define CONFIG_SHA_HW_ACCEL
#endif

#define CONFIG_USB_EHCI

#ifdef CONFIG_USB_EHCI
#define CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
#define CONFIG_USB_STORAGE
#define CONFIG_HAS_FSL_DR_USB
#endif

/*
 * Dynamic MTD Partition support with mtdparts
 */
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
			"8m(kernel),512k(dtb),-(fs)"
/*
 * Override partitions in device tree using info
 * in "mtdparts" environment variable
 */
#ifdef CONFIG_CMD_MTDPARTS
#define CONFIG_FDT_FIXUP_PARTITIONS
#endif

/*
 * Environment Configuration
 */

#if defined(CONFIG_TSEC_ENET)
#define CONFIG_HAS_ETH0
#endif

#define CONFIG_HOSTNAME		BSC9131rdb
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	"u-boot.bin" /* U-Boot image on TFTP server */

#define CONFIG_BAUDRATE		115200
#define CONFIG_BOOTDELAY	10 /* -1 disable auto-boot */

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"netdev=eth0\0"						\
	"uboot=" CONFIG_UBOOTPATH "\0"				\
	"loadaddr=1000000\0"			\
	"bootfile=uImage\0"	\
	"consoledev=ttyS0\0"				\
	"ramdiskaddr=2000000\0"			\
	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
	"fdtaddr=c00000\0"				\
	"fdtfile=bsc9131rdb.dtb\0"		\
	"bdev=sda1\0"	\
	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"	\
	"bootm_size=0x37000000\0"	\
	"othbootargs=ramdisk_size=600000 " \
	"default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
	"usbext2boot=setenv bootargs root=/dev/ram rw "	\
	"console=$consoledev,$baudrate $othbootargs; "	\
	"usb start;"			\
	"ext2load usb 0:4 $loadaddr $bootfile;"		\
	"ext2load usb 0:4 $fdtaddr $fdtfile;"	\
	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\
	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\

#define CONFIG_RAMBOOTCOMMAND		\
	"setenv bootargs root=/dev/ram rw "	\
	"console=$consoledev,$baudrate $othbootargs; "	\
	"tftp $ramdiskaddr $ramdiskfile;"	\
	"tftp $loadaddr $bootfile;"		\
	"tftp $fdtaddr $fdtfile;"		\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
7530d341 PK	1	/*
	2	* Copyright 2011-2012 Freescale Semiconductor, Inc.
	3	*
1a459660	4	* SPDX-License-Identifier: GPL-2.0+
7530d341 PK	5	*/
	6
	7	/*
	8	* BSC9131 RDB board configuration file
	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
4aafbb44	14	#define CONFIG_SYS_GENERIC_BOARD
	15	#define CONFIG_DISPLAY_BOARDINFO
	16
7530d341 PK	17	#ifdef CONFIG_BSC9131RDB
	18	#define CONFIG_BSC9131
	19	#define CONFIG_NAND_FSL_IFC
	20	#endif
	21
	22	#ifdef CONFIG_SPIFLASH
	23	#define CONFIG_RAMBOOT_SPIFLASH
	24	#define CONFIG_SYS_RAMBOOT
	25	#define CONFIG_SYS_EXTRA_ENV_RELOC
	26	#define CONFIG_SYS_TEXT_BASE 0x11000000
e222b1f3	27	#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
7530d341 PK	28	#endif
7530d341 PK	29
f1593269	30	#ifdef CONFIG_NAND
f1593269 PK	31	#define CONFIG_SPL_INIT_MINIMAL
	32	#define CONFIG_SPL_SERIAL_SUPPORT
	33	#define CONFIG_SPL_NAND_SUPPORT
fbe76ae4	34	#define CONFIG_SPL_NAND_BOOT
f1593269 PK	35	#define CONFIG_SPL_FLUSH_IMAGE
	36	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
	37
	38	#define CONFIG_SYS_TEXT_BASE 0x00201000
	39	#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
	40	#define CONFIG_SPL_MAX_SIZE 8192
	41	#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
	42	#define CONFIG_SPL_RELOC_STACK 0x00100000
e222b1f3	43	#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
f1593269 PK	44	#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
	45	#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
	46	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
	47	#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
7530d341 PK	48	#endif
7530d341 PK	49
f1593269 PK	50	#ifdef CONFIG_SPL_BUILD
	51	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	52	#else
	53	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	54	#endif
	55
	56
7530d341 PK	57	/* High Level Configuration Options */
	58	#define CONFIG_BOOKE /* BOOKE */
	59	#define CONFIG_E500 /* BOOKE e500 family */
7530d341	60	#define CONFIG_FSL_IFC /* Enable IFC Support */
737537ef	61	#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
7530d341 PK	62
	63	#define CONFIG_FSL_LAW /* Use common FSL init code */
	64	#define CONFIG_TSEC_ENET
	65	#define CONFIG_ENV_OVERWRITE
	66
	67	#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */
087cf44f PJ	68	#if defined(CONFIG_SYS_CLK_100)
	69	#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */
	70	#else
7530d341	71	#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */
087cf44f	72	#endif
7530d341 PK	73
	74	#define CONFIG_HWCONFIG
	75	/*
	76	* These can be toggled for performance analysis, otherwise use default.
	77	*/
	78	#define CONFIG_L2_CACHE /* toggle L2 cache */
	79	#define CONFIG_BTB /* enable branch predition */
	80
	81	#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
	82	#define CONFIG_SYS_MEMTEST_END 0x01ffffff
	83
	84	/* DDR Setup */
5614e71b	85	#define CONFIG_SYS_FSL_DDR3
7530d341 PK	86	#undef CONFIG_SYS_DDR_RAW_TIMING
	87	#undef CONFIG_DDR_SPD
	88	#define CONFIG_SYS_SPD_BUS_NUM 0
	89	#define SPD_EEPROM_ADDRESS 0x52 /* I2C access */
	90
	91	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	92
	93	#ifndef __ASSEMBLY__
	94	extern unsigned long get_sdram_size(void);
	95	#endif
	96	#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
	97	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	98	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	99
	100	#define CONFIG_NUM_DDR_CONTROLLERS 1
	101	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	102	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
	103
	104	#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
	105	#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
	106	#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
	107
	108	#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
	109	#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
	110	#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
	111	#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
	112
	113	#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
	114	#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
	115	#define CONFIG_SYS_DDR_RCW_1 0x00000000
	116	#define CONFIG_SYS_DDR_RCW_2 0x00000000
	117	#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
	118	#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
	119	#define CONFIG_SYS_DDR_TIMING_4 0x00000001
	120	#define CONFIG_SYS_DDR_TIMING_5 0x02401400
	121
	122	#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
	123	#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
	124	#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
	125	#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf
	126	#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
	127	#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
	128	#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
	129	#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
	130	#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
	131
	132	/*
	133	* Base addresses -- Note these are effective addresses where the
	134	* actual resources get mapped (not physical addresses)
	135	*/
	136	/* relocated CCSRBAR */
	137	#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
	138	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
	139
	140	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
	141	/* CONFIG_SYS_IMMR */
765b0bdb PJ	142	/* DSP CCSRBAR */
	143	#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
	144	#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
7530d341 PK	145
	146	/*
	147	* Memory map
	148	*
	149	* 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable
	150	* 0x8800_0000 0x8810_0000 IFC internal SRAM 1M
765b0bdb	151	* 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M
7530d341 PK	152	* 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
	153	* 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K
	154	* 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K
	155	* 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
765b0bdb	156	* 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
7530d341 PK	157	* 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
	158	* 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M
	159	*
	160	*/
	161
	162	/*
	163	* IFC Definitions
	164	*/
	165	#define CONFIG_SYS_NO_FLASH
	166
	167	/* NAND Flash on IFC */
	168	#define CONFIG_SYS_NAND_BASE 0xff800000
	169	#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
	170
	171	#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
	172	\| CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \
	173	\| CSPR_MSEL_NAND /* MSEL = NAND */ \
	174	\| CSPR_V)
	175	#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
	176
	177	#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	178	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	179	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	180	\| CSOR_NAND_RAL_2 /* RAL = 2Byes */ \
	181	\| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
	182	\| CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
	183	\| CSOR_NAND_PB(64)) /Pages Per Block = 64/
	184
	185	/* NAND Flash Timing Params */
4544fd29 PK	186	#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \
	187	\| FTIM0_NAND_TWP(0x05) \
	188	\| FTIM0_NAND_TWCHT(0x02) \
7530d341	189	\| FTIM0_NAND_TWH(0x04))
4544fd29 PK	190	#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \
	191	\| FTIM1_NAND_TWBE(0x1E) \
	192	\| FTIM1_NAND_TRR(0x07) \
7530d341 PK	193	\| FTIM1_NAND_TRP(0x05))
	194	#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \
	195	\| FTIM2_NAND_TREH(0x04) \
4544fd29 PK	196	\| FTIM2_NAND_TWHRE(0x11))
4544fd29 PK	197	#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
7530d341 PK	198
	199	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
	200	#define CONFIG_SYS_MAX_NAND_DEVICE 1
7530d341 PK	201	#define CONFIG_CMD_NAND
	202	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	203
	204	#define CONFIG_SYS_NAND_DDR_LAW 11
	205
	206	/* Set up IFC registers for boot location NAND */
	207	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
	208	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
	209	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
	210	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
	211	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
	212	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
	213	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
	214
	215	#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
	216
	217	#define CONFIG_SYS_INIT_RAM_LOCK
	218	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
	219	#define CONFIG_SYS_INIT_RAM_END 0x00004000/* End of used area in RAM */
	220
	221	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
	222	- GENERATED_GBL_DATA_SIZE)
	223	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	224
9307cbab	225	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
7530d341 PK	226	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
	227
	228	/* Serial Port */
	229	#define CONFIG_CONS_INDEX 1
	230	#undef CONFIG_SERIAL_SOFTWARE_FIFO
	231	#define CONFIG_SYS_NS16550
	232	#define CONFIG_SYS_NS16550_SERIAL
	233	#define CONFIG_SYS_NS16550_REG_SIZE 1
	234	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
f1593269 PK	235	#ifdef CONFIG_SPL_BUILD
	236	#define CONFIG_NS16550_MIN_FUNCTIONS
	237	#endif
7530d341 PK	238
	239	#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
	240
	241	#define CONFIG_SYS_BAUDRATE_TABLE \
	242	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	243
	244	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
	245
	246	/* Use the HUSH parser */
	247	#define CONFIG_SYS_HUSH_PARSER
	248	#ifdef CONFIG_SYS_HUSH_PARSER
	249	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	250	#endif
	251
	252	/*
	253	* Pass open firmware flat tree
	254	*/
	255	#define CONFIG_OF_LIBFDT
	256	#define CONFIG_OF_BOARD_SETUP
	257	#define CONFIG_OF_STDOUT_VIA_ALIAS
	258
	259	/* new uImage format support */
	260	#define CONFIG_FIT
	261	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
	262
00f792e0 HS	263	#define CONFIG_SYS_I2C
	264	#define CONFIG_SYS_I2C_FSL
	265	#define CONFIG_SYS_FSL_I2C_SPEED 400000
	266	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	267	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
7530d341 PK	268
	269	/* I2C EEPROM */
	270	#define CONFIG_CMD_EEPROM
	271	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	272	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	273	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	274	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	275
	276	#define CONFIG_CMD_I2C
	277
	278
	279	#define CONFIG_FSL_ESPI
	280	/* eSPI - Enhanced SPI */
	281	#ifdef CONFIG_FSL_ESPI
7530d341 PK	282	#define CONFIG_SPI_FLASH_SPANSION
	283	#define CONFIG_CMD_SF
	284	#define CONFIG_SF_DEFAULT_SPEED 10000000
	285	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	286	#endif
	287
	288	#if defined(CONFIG_TSEC_ENET)
	289
	290	#define CONFIG_MII /* MII PHY management */
	291	#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
	292	#define CONFIG_TSEC1 1
	293	#define CONFIG_TSEC1_NAME "eTSEC1"
	294	#define CONFIG_TSEC2 1
	295	#define CONFIG_TSEC2_NAME "eTSEC2"
	296
	297	#define TSEC1_PHY_ADDR 0
	298	#define TSEC2_PHY_ADDR 3
	299
	300	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	301	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	302
	303	#define TSEC1_PHYIDX 0
	304
	305	#define TSEC2_PHYIDX 0
	306
	307	#define CONFIG_ETHPRIME "eTSEC1"
	308
	309	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
	310
	311	#endif /* CONFIG_TSEC_ENET */
	312
	313	/*
	314	* Environment
	315	*/
7530d341 PK	316	#if defined(CONFIG_RAMBOOT_SPIFLASH)
	317	#define CONFIG_ENV_IS_IN_SPI_FLASH
	318	#define CONFIG_ENV_SPI_BUS 0
	319	#define CONFIG_ENV_SPI_CS 0
	320	#define CONFIG_ENV_SPI_MAX_HZ 10000000
	321	#define CONFIG_ENV_SPI_MODE 0
	322	#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
	323	#define CONFIG_ENV_SECT_SIZE 0x10000
	324	#define CONFIG_ENV_SIZE 0x2000
f1593269 PK	325	#elif defined(CONFIG_NAND)
	326	#define CONFIG_ENV_IS_IN_NAND
	327	#define CONFIG_SYS_EXTRA_ENV_RELOC
	328	#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
e222b1f3	329	#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
f1593269 PK	330	#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
	331	#elif defined(CONFIG_SYS_RAMBOOT)
	332	#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
7530d341	333	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
f1593269	334	#define CONFIG_ENV_SIZE 0x2000
7530d341 PK	335	#endif
	336
	337	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	338	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	339
	340	/*
	341	* Command line configuration.
	342	*/
7530d341 PK	343	#define CONFIG_CMD_DHCP
7530d341 PK	344	#define CONFIG_CMD_ERRATA
7530d341 PK	345	#define CONFIG_CMD_EXT2
	346	#define CONFIG_CMD_FAT
	347	#define CONFIG_CMD_IRQ
	348	#define CONFIG_CMD_MII
	349	#define CONFIG_DOS_PARTITION
	350	#define CONFIG_CMD_PING
	351	#define CONFIG_CMD_REGINFO
7530d341 PK	352
	353	/*
	354	* Miscellaneous configurable options
	355	*/
	356	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	357	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	358	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	359	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
7530d341 PK	360
	361	#if defined(CONFIG_CMD_KGDB)
	362	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	363	#else
	364	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	365	#endif
	366	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	367	/* Print Buffer Size */
	368	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	369	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
7530d341 PK	370
	371	/*
	372	* For booting Linux, the board info and command line data
	373	* have to be in the first 64 MB of memory, since this is
	374	* the maximum mapped by the Linux kernel during initialization.
	375	*/
	376	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
	377	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	378
	379	#if defined(CONFIG_CMD_KGDB)
	380	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
7530d341 PK	381	#endif
7530d341 PK	382
737537ef RG	383	/* Hash command with SHA acceleration supported in hardware */
	384	#ifdef CONFIG_FSL_CAAM
	385	#define CONFIG_CMD_HASH
	386	#define CONFIG_SHA_HW_ACCEL
	387	#endif
	388
7530d341 PK	389	#define CONFIG_USB_EHCI
	390
	391	#ifdef CONFIG_USB_EHCI
	392	#define CONFIG_CMD_USB
	393	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	394	#define CONFIG_USB_EHCI_FSL
	395	#define CONFIG_USB_STORAGE
	396	#define CONFIG_HAS_FSL_DR_USB
	397	#endif
	398
7ac1a24a AK	399	/*
	400	* Dynamic MTD Partition support with mtdparts
	401	*/
	402	#define CONFIG_MTD_DEVICE
	403	#define CONFIG_MTD_PARTITIONS
	404	#define CONFIG_CMD_MTDPARTS
	405	#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
	406	#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
	407	"8m(kernel),512k(dtb),-(fs)"
	408	/*
	409	* Override partitions in device tree using info
	410	* in "mtdparts" environment variable
	411	*/
	412	#ifdef CONFIG_CMD_MTDPARTS
	413	#define CONFIG_FDT_FIXUP_PARTITIONS
	414	#endif
	415
7530d341 PK	416	/*
	417	* Environment Configuration
	418	*/
	419
	420	#if defined(CONFIG_TSEC_ENET)
	421	#define CONFIG_HAS_ETH0
	422	#endif
	423
	424	#define CONFIG_HOSTNAME BSC9131rdb
	425	#define CONFIG_ROOTPATH "/opt/nfsroot"
	426	#define CONFIG_BOOTFILE "uImage"
	427	#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
	428
	429	#define CONFIG_BAUDRATE 115200
37811ec2	430	#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */
7530d341 PK	431
	432	#define CONFIG_EXTRA_ENV_SETTINGS \
	433	"netdev=eth0\0" \
	434	"uboot=" CONFIG_UBOOTPATH "\0" \
	435	"loadaddr=1000000\0" \
	436	"bootfile=uImage\0" \
	437	"consoledev=ttyS0\0" \
	438	"ramdiskaddr=2000000\0" \
	439	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
	440	"fdtaddr=c00000\0" \
	441	"fdtfile=bsc9131rdb.dtb\0" \
	442	"bdev=sda1\0" \
	443	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
1d2949ae PJ	444	"bootm_size=0x37000000\0" \
	445	"othbootargs=ramdisk_size=600000 " \
	446	"default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
7530d341 PK	447	"usbext2boot=setenv bootargs root=/dev/ram rw " \
	448	"console=$consoledev,$baudrate $othbootargs; " \
	449	"usb start;" \
	450	"ext2load usb 0:4 $loadaddr $bootfile;" \
	451	"ext2load usb 0:4 $fdtaddr $fdtfile;" \
	452	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
	453	"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
	454
	455	#define CONFIG_RAMBOOTCOMMAND \
	456	"setenv bootargs root=/dev/ram rw " \
	457	"console=$consoledev,$baudrate $othbootargs; " \
	458	"tftp $ramdiskaddr $ramdiskfile;" \
	459	"tftp $loadaddr $bootfile;" \
	460	"tftp $fdtaddr $fdtfile;" \
	461	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	462
	463	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
	464
	465	#endif /* __CONFIG_H */