[people/ms/u-boot.git] / include / configs / M54451EVB.h

/*
 * Configuation settings for the Freescale MCF54451 EVB board.
 *
 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M54451EVB_H
#define _M54451EVB_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MCF5445x		/* define processor family */
#define CONFIG_M54451		/* define processor type */
#define CONFIG_M54451EVB	/* M54451EVB board */

#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE		115200

#undef CONFIG_WATCHDOG

#define CONFIG_TIMESTAMP	/* Print image info with timestamp */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/* Command line configuration */
#include <config_cmd_default.h>

#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_I2C
#undef CONFIG_CMD_JFFS2
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF

#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS

/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#	define CONFIG_MII		1
#	define CONFIG_MII_INIT		1
#	define CONFIG_SYS_DISCOVER_PHY
#	define CONFIG_SYS_RX_ETH_BUFFER	8
#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

#	define CONFIG_SYS_FEC0_PINMUX	0
#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
#	define MCFFEC_TOUT_LOOP 50000

#	define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
#	define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
#	define CONFIG_ETHADDR		00:e0:0c:bc:e5:60
#	define CONFIG_ETHPRIME		"FEC0"
#	define CONFIG_IPADDR		192.162.1.2
#	define CONFIG_NETMASK		255.255.255.0
#	define CONFIG_SERVERIP		192.162.1.1
#	define CONFIG_GATEWAYIP		192.162.1.1
#	define CONFIG_OVERWRITE_ETHADDR_ONCE

/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#	ifndef CONFIG_SYS_DISCOVER_PHY
#		define FECDUPLEX	FULL
#		define FECSPEED		_100BASET
#	else
#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#		endif
#	endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_HOSTNAME		M54451EVB
#ifdef CONFIG_SYS_STMICRO_BOOT
/* ST Micro serial flash */
#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=0x40010000\0"			\
	"sbfhdr=sbfhdr.bin\0"			\
	"uboot=u-boot.bin\0"			\
	"load=tftp ${loadaddr} ${sbfhdr};"	\
	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
	"upd=run load; run prog\0"		\
	"prog=sf probe 0:1 1000000 3;"		\
	"sf erase 0 30000;"			\
	"sf write ${loadaddr} 0 30000;"		\
	"save\0"				\
	""
#else
#define CONFIG_SYS_UBOOT_END	0x3FFFF
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=40010000\0"			\
	"u-boot=u-boot.bin\0"			\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"		\
	"prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END)	\
	"; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;"	\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"				\
	""
#endif

/* Realtime clock */
#define CONFIG_MCFRTC
#undef RTC_DEBUG
#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2c */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	80000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR

/* DSPI and Serial Flash */
#define CONFIG_CF_SPI
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE		0x7
#ifdef CONFIG_CMD_SPI
#	define CONFIG_SPI_FLASH
#	define CONFIG_SPI_FLASH_STMICRO

#	define CONFIG_SYS_DSPI_CTAR0	(DSPI_CTAR_TRSZ(7) | \
					 DSPI_CTAR_PCSSCK_1CLK | \
					 DSPI_CTAR_PASC(0) | \
					 DSPI_CTAR_PDT(0) | \
					 DSPI_CTAR_CSSCK(0) | \
					 DSPI_CTAR_ASC(0) | \
					 DSPI_CTAR_DT(1))
#	define CONFIG_SYS_DSPI_CTAR1	(CONFIG_SYS_DSPI_CTAR0)
#	define CONFIG_SYS_DSPI_CTAR2	(CONFIG_SYS_DSPI_CTAR0)
#endif

/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK

#define CONFIG_PRAM			2048	/* 2048 KB */

#define CONFIG_SYS_PROMPT		"-> "
#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE			1024	/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE			256	/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)

#define CONFIG_SYS_MBAR			0xFC000000

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1		0x33633F30
#define CONFIG_SYS_SDRAM_CFG2		0x57670000
#define CONFIG_SYS_SDRAM_CTRL		0xE20D2C00
#define CONFIG_SYS_SDRAM_EMOD		0x80810000
#define CONFIG_SYS_SDRAM_MODE		0x008D0000
#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x44

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)

#ifdef CONFIG_CF_SBF
#	define CONFIG_SERIAL_BOOT
#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
#else
#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */

/* Reserve 256 kB for malloc() */
#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
/* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))

/* Configuration for environment
 * Environment is not embedded in u-boot. First time runing may have env
 * crc error warning if there is no correct environment on the flash.
 */
#if defined(CONFIG_SYS_STMICRO_BOOT)
#	define CONFIG_ENV_IS_IN_SPI_FLASH	1
#	define CONFIG_ENV_SPI_CS		1
#	define CONFIG_ENV_OFFSET		0x20000
#	define CONFIG_ENV_SIZE		0x2000
#	define CONFIG_ENV_SECT_SIZE	0x10000
#else
#	define CONFIG_ENV_IS_IN_FLASH	1
#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
#	define CONFIG_ENV_SIZE		0x2000
#	define CONFIG_ENV_SECT_SIZE	0x20000
#endif
#undef CONFIG_ENV_OVERWRITE

/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI

#	define CONFIG_FLASH_CFI_DRIVER	1
#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
#	define CONFIG_SYS_FLASH_CHECKSUM
#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }

#endif

/*
 * This is setting for JFFS2 support in u-boot.
 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 */
#ifdef CONFIG_CMD_JFFS2
#	define CONFIG_JFFS2_DEV		"nor0"
#	define CONFIG_JFFS2_PART_SIZE	0x01000000
#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
#endif

/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE		16

#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
					 CF_CACR_ICINVA | CF_CACR_EUSP)
#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
					 CF_CACR_DEC | CF_CACR_DDCM_P | \
					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)

/*-----------------------------------------------------------------------
 * Memory bank definitions
 */
/*
 * CS0 - NOR Flash 16MB
 * CS1 - Available
 * CS2 - Available
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */

 /* Flash */
#define CONFIG_SYS_CS0_BASE		0x00000000
#define CONFIG_SYS_CS0_MASK		0x00FF0001
#define CONFIG_SYS_CS0_CTRL		0x00004D80

#define CONFIG_SYS_SPANSION_BASE	CONFIG_SYS_CS0_BASE

#endif				/* _M54451EVB_H */
Commit	Line	Data
05316f8e TL	1	/*
	2	* Configuation settings for the Freescale MCF54451 EVB board.
	3	*
	4	* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
	5	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
05316f8e TL	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M54451EVB_H
	15	#define _M54451EVB_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
	21	#define CONFIG_MCF5445x /* define processor family */
	22	#define CONFIG_M54451 /* define processor type */
	23	#define CONFIG_M54451EVB /* M54451EVB board */
	24
1313db48 AW	25	#define CONFIG_DISPLAY_BOARDINFO
1313db48 AW	26
05316f8e	27	#define CONFIG_MCFUART
6d0f6bcf	28	#define CONFIG_SYS_UART_PORT (0)
05316f8e	29	#define CONFIG_BAUDRATE 115200
05316f8e TL	30
	31	#undef CONFIG_WATCHDOG
	32
	33	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	34
	35	/*
	36	* BOOTP options
	37	*/
	38	#define CONFIG_BOOTP_BOOTFILESIZE
	39	#define CONFIG_BOOTP_BOOTPATH
	40	#define CONFIG_BOOTP_GATEWAY
	41	#define CONFIG_BOOTP_HOSTNAME
	42
	43	/* Command line configuration */
	44	#include <config_cmd_default.h>
	45
	46	#define CONFIG_CMD_BOOTD
	47	#define CONFIG_CMD_CACHE
	48	#define CONFIG_CMD_DATE
	49	#define CONFIG_CMD_DHCP
	50	#define CONFIG_CMD_ELF
	51	#define CONFIG_CMD_FLASH
	52	#define CONFIG_CMD_I2C
	53	#undef CONFIG_CMD_JFFS2
	54	#define CONFIG_CMD_MEMORY
	55	#define CONFIG_CMD_MISC
	56	#define CONFIG_CMD_MII
	57	#define CONFIG_CMD_NET
709b384b	58	#define CONFIG_CMD_NFS
05316f8e TL	59	#define CONFIG_CMD_PING
	60	#define CONFIG_CMD_REGINFO
	61	#define CONFIG_CMD_SPI
	62	#define CONFIG_CMD_SF
	63
	64	#undef CONFIG_CMD_LOADB
	65	#undef CONFIG_CMD_LOADS
	66
	67	/* Network configuration */
	68	#define CONFIG_MCFFEC
	69	#ifdef CONFIG_MCFFEC
05316f8e TL	70	# define CONFIG_MII 1
05316f8e TL	71	# define CONFIG_MII_INIT 1
6d0f6bcf JCPV	72	# define CONFIG_SYS_DISCOVER_PHY
	73	# define CONFIG_SYS_RX_ETH_BUFFER 8
	74	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
05316f8e	75
6d0f6bcf JCPV	76	# define CONFIG_SYS_FEC0_PINMUX 0
6d0f6bcf JCPV	77	# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
05316f8e TL	78	# define MCFFEC_TOUT_LOOP 50000
	79
	80	# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
052c0891	81	# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
05316f8e TL	82	# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
	83	# define CONFIG_ETHPRIME "FEC0"
	84	# define CONFIG_IPADDR 192.162.1.2
	85	# define CONFIG_NETMASK 255.255.255.0
	86	# define CONFIG_SERVERIP 192.162.1.1
	87	# define CONFIG_GATEWAYIP 192.162.1.1
	88	# define CONFIG_OVERWRITE_ETHADDR_ONCE
	89
6d0f6bcf JCPV	90	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
6d0f6bcf JCPV	91	# ifndef CONFIG_SYS_DISCOVER_PHY
05316f8e TL	92	# define FECDUPLEX FULL
	93	# define FECSPEED _100BASET
	94	# else
6d0f6bcf JCPV	95	# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
6d0f6bcf JCPV	96	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
05316f8e	97	# endif
6d0f6bcf	98	# endif /* CONFIG_SYS_DISCOVER_PHY */
05316f8e TL	99	#endif
	100
	101	#define CONFIG_HOSTNAME M54451EVB
6d0f6bcf	102	#ifdef CONFIG_SYS_STMICRO_BOOT
05316f8e	103	/* ST Micro serial flash */
6d0f6bcf	104	#define CONFIG_SYS_LOAD_ADDR2 0x40010007
05316f8e TL	105	#define CONFIG_EXTRA_ENV_SETTINGS \
05316f8e TL	106	"netdev=eth0\0" \
5368c55d	107	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
05316f8e TL	108	"loadaddr=0x40010000\0" \
	109	"sbfhdr=sbfhdr.bin\0" \
	110	"uboot=u-boot.bin\0" \
	111	"load=tftp ${loadaddr} ${sbfhdr};" \
5368c55d	112	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
05316f8e	113	"upd=run load; run prog\0" \
09933fb0	114	"prog=sf probe 0:1 1000000 3;" \
05316f8e TL	115	"sf erase 0 30000;" \
	116	"sf write ${loadaddr} 0 30000;" \
	117	"save\0" \
	118	""
	119	#else
6d0f6bcf	120	#define CONFIG_SYS_UBOOT_END 0x3FFFF
05316f8e TL	121	#define CONFIG_EXTRA_ENV_SETTINGS \
05316f8e TL	122	"netdev=eth0\0" \
5368c55d	123	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
05316f8e TL	124	"loadaddr=40010000\0" \
	125	"u-boot=u-boot.bin\0" \
	126	"load=tftp ${loadaddr) ${u-boot}\0" \
	127	"upd=run load; run prog\0" \
5368c55d MV	128	"prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END) \
5368c55d MV	129	"; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;" \
05316f8e TL	130	"cp.b ${loadaddr} 0 ${filesize};" \
	131	"save\0" \
	132	""
	133	#endif
	134
	135	/* Realtime clock */
	136	#define CONFIG_MCFRTC
	137	#undef RTC_DEBUG
6d0f6bcf	138	#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ)
05316f8e TL	139
	140	/* Timer */
	141	#define CONFIG_MCFTMR
	142	#undef CONFIG_MCFPIT
	143
	144	/* I2c */
00f792e0 HS	145	#define CONFIG_SYS_I2C
	146	#define CONFIG_SYS_I2C_FSL
	147	#define CONFIG_SYS_FSL_I2C_SPEED 80000
	148	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	149	#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
709b384b	150	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
05316f8e TL	151
05316f8e TL	152	/* DSPI and Serial Flash */
ee0a8462	153	#define CONFIG_CF_SPI
05316f8e TL	154	#define CONFIG_CF_DSPI
	155	#define CONFIG_SERIAL_FLASH
	156	#define CONFIG_HARD_SPI
6d0f6bcf	157	#define CONFIG_SYS_SBFHDR_SIZE 0x7
05316f8e TL	158	#ifdef CONFIG_CMD_SPI
	159	# define CONFIG_SPI_FLASH
	160	# define CONFIG_SPI_FLASH_STMICRO
	161
ee0a8462 TL	162	# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) \| \
	163	DSPI_CTAR_PCSSCK_1CLK \| \
	164	DSPI_CTAR_PASC(0) \| \
	165	DSPI_CTAR_PDT(0) \| \
	166	DSPI_CTAR_CSSCK(0) \| \
	167	DSPI_CTAR_ASC(0) \| \
	168	DSPI_CTAR_DT(1))
	169	# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
	170	# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
05316f8e TL	171	#endif
	172
	173	/* Input, PCI, Flexbus, and VCO */
	174	#define CONFIG_EXTRA_CLOCK
	175
709b384b	176	#define CONFIG_PRAM 2048 /* 2048 KB */
05316f8e	177
6d0f6bcf JCPV	178	#define CONFIG_SYS_PROMPT "-> "
6d0f6bcf JCPV	179	#define CONFIG_SYS_LONGHELP /* undef to save memory */
05316f8e TL	180
05316f8e TL	181	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	182	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
05316f8e	183	#else
6d0f6bcf	184	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
05316f8e	185	#endif
6d0f6bcf JCPV	186	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	187	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	188	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
05316f8e	189
6d0f6bcf	190	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
05316f8e	191
709b384b	192	#define CONFIG_SYS_MBAR 0xFC000000
05316f8e TL	193
	194	/*
	195	* Low Level Configuration Settings
	196	* (address mappings, register initial values, etc.)
	197	* You should know what you are doing if you make changes here.
	198	*/
	199
	200	/*-----------------------------------------------------------------------
	201	* Definitions for initial stack pointer and data area (in DPRAM)
	202	*/
6d0f6bcf	203	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
553f0982	204	#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
6d0f6bcf	205	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
25ddd1fb	206	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
6d0f6bcf	207	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
553f0982	208	#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
05316f8e TL	209
	210	/*-----------------------------------------------------------------------
	211	* Start addresses for the final memory configuration
	212	* (Set up by the startup code)
6d0f6bcf	213	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
05316f8e	214	*/
6d0f6bcf JCPV	215	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	216	#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */
	217	#define CONFIG_SYS_SDRAM_CFG1 0x33633F30
	218	#define CONFIG_SYS_SDRAM_CFG2 0x57670000
	219	#define CONFIG_SYS_SDRAM_CTRL 0xE20D2C00
	220	#define CONFIG_SYS_SDRAM_EMOD 0x80810000
	221	#define CONFIG_SYS_SDRAM_MODE 0x008D0000
	222	#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x44
	223
	224	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
	225	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
05316f8e TL	226
05316f8e TL	227	#ifdef CONFIG_CF_SBF
09933fb0	228	# define CONFIG_SERIAL_BOOT
14d0a02a	229	# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
05316f8e	230	#else
6d0f6bcf	231	# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
05316f8e	232	#endif
6d0f6bcf JCPV	233	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
6d0f6bcf JCPV	234	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
05316f8e	235
09933fb0 JJ	236	/* Reserve 256 kB for malloc() */
09933fb0 JJ	237	#define CONFIG_SYS_MALLOC_LEN (256 << 10)
05316f8e TL	238	/*
	239	* For booting Linux, the board info and command line data
	240	* have to be in the first 8 MB of memory, since this is
	241	* the maximum mapped by the Linux kernel during initialization ??
	242	*/
	243	/* Initial Memory map for Linux */
6d0f6bcf	244	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
05316f8e TL	245
05316f8e TL	246	/* Configuration for environment
09933fb0 JJ	247	* Environment is not embedded in u-boot. First time runing may have env
09933fb0 JJ	248	* crc error warning if there is no correct environment on the flash.
05316f8e	249	*/
709b384b	250	#if defined(CONFIG_SYS_STMICRO_BOOT)
0b5099a8	251	# define CONFIG_ENV_IS_IN_SPI_FLASH 1
0e8d1586 JCPV	252	# define CONFIG_ENV_SPI_CS 1
	253	# define CONFIG_ENV_OFFSET 0x20000
	254	# define CONFIG_ENV_SIZE 0x2000
	255	# define CONFIG_ENV_SECT_SIZE 0x10000
05316f8e	256	#else
5a1aceb0	257	# define CONFIG_ENV_IS_IN_FLASH 1
09933fb0	258	# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
709b384b	259	# define CONFIG_ENV_SIZE 0x2000
09933fb0	260	# define CONFIG_ENV_SECT_SIZE 0x20000
05316f8e TL	261	#endif
05316f8e TL	262	#undef CONFIG_ENV_OVERWRITE
05316f8e	263
ee0a8462 TL	264	/* FLASH organization */
ee0a8462 TL	265	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
05316f8e	266
6d0f6bcf JCPV	267	#define CONFIG_SYS_FLASH_CFI
6d0f6bcf JCPV	268	#ifdef CONFIG_SYS_FLASH_CFI
05316f8e TL	269
05316f8e TL	270	# define CONFIG_FLASH_CFI_DRIVER 1
709b384b	271	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
6d0f6bcf JCPV	272	# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
	273	# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	274	# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	275	# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
	276	# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
	277	# define CONFIG_SYS_FLASH_CHECKSUM
	278	# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE }
05316f8e TL	279
	280	#endif
	281
	282	/*
	283	* This is setting for JFFS2 support in u-boot.
	284	* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
	285	*/
709b384b	286	#ifdef CONFIG_CMD_JFFS2
05316f8e TL	287	# define CONFIG_JFFS2_DEV "nor0"
05316f8e TL	288	# define CONFIG_JFFS2_PART_SIZE 0x01000000
6d0f6bcf	289	# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
05316f8e TL	290	#endif
05316f8e TL	291
709b384b	292	/* Cache Configuration */
6d0f6bcf	293	#define CONFIG_SYS_CACHELINE_SIZE 16
05316f8e	294
dd9f054e	295	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	296	CONFIG_SYS_INIT_RAM_SIZE - 8)
dd9f054e	297	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	298	CONFIG_SYS_INIT_RAM_SIZE - 4)
dd9f054e TL	299	#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
	300	#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
	301	#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE \| \
	302	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	303	CF_ACR_EN \| CF_ACR_SM_ALL)
	304	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC \| CF_CACR_IEC \| \
	305	CF_CACR_ICINVA \| CF_CACR_EUSP)
	306	#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR \| \
	307	CF_CACR_DEC \| CF_CACR_DDCM_P \| \
	308	CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
	309
05316f8e TL	310	/*-----------------------------------------------------------------------
	311	* Memory bank definitions
	312	*/
	313	/*
709b384b	314	* CS0 - NOR Flash 16MB
05316f8e TL	315	* CS1 - Available
	316	* CS2 - Available
	317	* CS3 - Available
	318	* CS4 - Available
	319	* CS5 - Available
	320	*/
	321
709b384b	322	/* Flash */
6d0f6bcf	323	#define CONFIG_SYS_CS0_BASE 0x00000000
709b384b TL	324	#define CONFIG_SYS_CS0_MASK 0x00FF0001
709b384b TL	325	#define CONFIG_SYS_CS0_CTRL 0x00004D80
05316f8e	326
6d0f6bcf	327	#define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE
05316f8e TL	328
05316f8e TL	329	#endif /* _M54451EVB_H */