]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/colibri_vf.h
common/board_f.c: modify the macro to use get_clocks() more common
[people/ms/u-boot.git] / include / configs / colibri_vf.h
CommitLineData
e7b860fa
SM
1/*
2 * Copyright 2015 Toradex, Inc.
3 *
4 * Configuration settings for the Toradex VF50/VF61 module.
5 *
6 * Based on vf610twr.h:
7 * Copyright 2013 Freescale Semiconductor, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef __CONFIG_H
13#define __CONFIG_H
14
15#include <asm/arch/imx-regs.h>
e7b860fa
SM
16
17#define CONFIG_VF610
18#define CONFIG_SYS_THUMB_BUILD
19#define CONFIG_USE_ARCH_MEMCPY
20#define CONFIG_USE_ARCH_MEMSET
677f970b 21#define CONFIG_FSL_CLK
e7b860fa 22
e7b860fa
SM
23#define CONFIG_ARCH_MISC_INIT
24#define CONFIG_DISPLAY_CPUINFO
25#define CONFIG_DISPLAY_BOARDINFO
26
27#define CONFIG_SKIP_LOWLEVEL_INIT
28
29#define CONFIG_CMD_FUSE
30#ifdef CONFIG_CMD_FUSE
31#define CONFIG_MXC_OCOTP
32#endif
33
34/* Size of malloc() pool */
35#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
36
37#define CONFIG_BOARD_EARLY_INIT_F
38
39#define CONFIG_FSL_LPUART
40#define LPUART_BASE UART0_BASE
41
42/* Allow to overwrite serial and ethaddr */
43#define CONFIG_ENV_OVERWRITE
44#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
45#define CONFIG_VERSION_VARIABLE
46#define CONFIG_SYS_UART_PORT (0)
47#define CONFIG_BAUDRATE 115200
48#define CONFIG_CMD_ASKENV
49
50/* NAND support */
51#define CONFIG_CMD_NAND
8fca2d8c 52#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa
SM
53#define CONFIG_SYS_MAX_NAND_DEVICE 1
54#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
55
30748d81
BD
56/* GPIO support */
57#define CONFIG_DM_GPIO
58#define CONFIG_CMD_GPIO
59#define CONFIG_VYBRID_GPIO
60
e7b860fa
SM
61/* Dynamic MTD partition support */
62#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
63#define CONFIG_MTD_PARTITIONS
64#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
65#define MTDIDS_DEFAULT "nand0=vf610_nfc"
66#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
67 "128k(vf-bcb)ro," \
68 "1408k(u-boot)ro," \
69 "512k(u-boot-env)," \
70 "-(ubi)"
71
e7b860fa
SM
72#define CONFIG_MMC
73#define CONFIG_FSL_ESDHC
74#define CONFIG_SYS_FSL_ESDHC_ADDR 0
75#define CONFIG_SYS_FSL_ESDHC_NUM 1
76
77#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
78
79#define CONFIG_CMD_MMC
80#define CONFIG_GENERIC_MMC
81#define CONFIG_CMD_FAT
82#define CONFIG_CMD_EXT3
83#define CONFIG_CMD_EXT4
84#define CONFIG_DOS_PARTITION
85
86#define CONFIG_RBTREE
87#define CONFIG_LZO
88#define CONFIG_CMD_FS_GENERIC
89#define CONFIG_CMD_BOOTZ
90#define CONFIG_CMD_UBI
91#define CONFIG_MTD_UBI_FASTMAP
92#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
93
94#define CONFIG_CMD_PING
95#define CONFIG_CMD_DHCP
96#define CONFIG_CMD_MII
e7b860fa
SM
97#define CONFIG_FEC_MXC
98#define CONFIG_MII
99#define IMX_FEC_BASE ENET1_BASE_ADDR
100#define CONFIG_FEC_XCV_TYPE RMII
101#define CONFIG_FEC_MXC_PHYADDR 0
102#define CONFIG_PHYLIB
103#define CONFIG_PHY_MICREL
104
105#define CONFIG_IPADDR 192.168.10.2
106#define CONFIG_NETMASK 255.255.255.0
107#define CONFIG_SERVERIP 192.168.10.1
108
109#define CONFIG_BOOTDELAY 1
110#define CONFIG_BOARD_LATE_INIT
111
112#define CONFIG_LOADADDR 0x80008000
113#define CONFIG_FDTADDR 0x84000000
114
115/* We boot from the gfxRAM area of the OCRAM. */
116#define CONFIG_SYS_TEXT_BASE 0x3f408000
117#define CONFIG_BOARD_SIZE_LIMIT 524288
118
119#define SD_BOOTCMD \
120 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
121 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
122 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
123 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
124 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
125 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
126
127#define NFS_BOOTCMD \
128 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
129 "nfsboot=run setup; " \
130 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
131 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
132 "dhcp ${kernel_addr_r} && " \
133 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
134 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
135
136#define UBI_BOOTCMD \
137 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
138 "ubi.fm_autoconvert=1\0" \
139 "ubiboot=run setup; " \
140 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
141 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
142 "ubi part ubi && ubifsmount ubi0:rootfs && " \
143 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
144 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
145 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
146
147#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
148
bba97cd2
SM
149#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
150
e7b860fa
SM
151#define CONFIG_EXTRA_ENV_SETTINGS \
152 "kernel_addr_r=0x82000000\0" \
153 "fdt_addr_r=0x84000000\0" \
154 "kernel_file=zImage\0" \
155 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
156 "fdt_board=eval-v3\0" \
157 "defargs=\0" \
158 "console=ttyLP0\0" \
159 "setup=setenv setupargs " \
160 "console=tty1 console=${console}" \
161 ",${baudrate}n8 ${memargs}\0" \
162 "setsdupdate=mmc rescan && set interface mmc && " \
163 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
164 "source ${loadaddr}\0" \
165 "setusbupdate=usb start && set interface usb && " \
166 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
167 "source ${loadaddr}\0" \
168 "setupdate=run setsdupdate || run setusbupdate\0" \
169 "mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2 170 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa
SM
171 SD_BOOTCMD \
172 NFS_BOOTCMD \
173 UBI_BOOTCMD
174
175/* Miscellaneous configurable options */
176#define CONFIG_SYS_LONGHELP /* undef to save memory */
177#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
178#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
e7b860fa 179#undef CONFIG_AUTO_COMPLETE
aa5a0d98 180#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e7b860fa
SM
181#define CONFIG_SYS_PBSIZE \
182 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
183#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
184#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
185
186#define CONFIG_CMD_MEMTEST
187#define CONFIG_SYS_MEMTEST_START 0x80010000
188#define CONFIG_SYS_MEMTEST_END 0x87C00000
189
190#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
191#define CONFIG_SYS_HZ 1000
192#define CONFIG_CMDLINE_EDITING
193
194/*
195 * Stack sizes
196 * The stack sizes are set up in start.S using the settings below
197 */
198#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
199
200/* Physical memory map */
201#define CONFIG_NR_DRAM_BANKS 1
202#define PHYS_SDRAM (0x80000000)
203#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
204
205#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
206#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
207#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
208
209#define CONFIG_SYS_INIT_SP_OFFSET \
210 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211#define CONFIG_SYS_INIT_SP_ADDR \
212 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
213
214/* Environment organization */
215#define CONFIG_SYS_NO_FLASH
216
217#ifdef CONFIG_ENV_IS_IN_MMC
218#define CONFIG_SYS_MMC_ENV_DEV 0
219#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
220#define CONFIG_ENV_SIZE (8 * 1024)
221#endif
222
223#ifdef CONFIG_ENV_IS_IN_NAND
224#define CONFIG_ENV_SIZE (64 * 2048)
225#define CONFIG_ENV_RANGE (4 * 64 * 2048)
226#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
227#endif
228
229#define CONFIG_OF_LIBFDT
230#define CONFIG_CMD_BOOTZ
231
232#define CONFIG_SYS_NO_FLASH
233
234#define CONFIG_SYS_CACHELINE_SIZE 32
235
bba97cd2
SM
236/* USB Host Support */
237#define CONFIG_CMD_USB
238#define CONFIG_USB_EHCI
239#define CONFIG_USB_EHCI_VF
240#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
241#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
242
243/* USB Client Support */
244#define CONFIG_USB_GADGET
245#define CONFIG_CI_UDC
246#define CONFIG_USB_GADGET_DUALSPEED
247#define CONFIG_USB_GADGET_VBUS_DRAW 2
248#define CONFIG_TRDX_VID 0x1B67
249#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
250#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
251#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
252#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
253#define CONFIG_G_DNL_MANUFACTURER "Toradex"
254#define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
255#define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
256
257/* USB DFU */
01acd6ab 258#define CONFIG_USB_GADGET_DOWNLOAD
bba97cd2 259#define CONFIG_CMD_DFU
01acd6ab 260#define CONFIG_USB_FUNCTION_DFU
bba97cd2
SM
261#define CONFIG_DFU_NAND
262#define CONFIG_DFU_MMC
263#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
264
265/* USB Storage */
266#define CONFIG_USB_STORAGE
01acd6ab 267#define CONFIG_USB_FUNCTION_MASS_STORAGE
bba97cd2
SM
268#define CONFIG_CMD_USB_MASS_STORAGE
269
98e3fd3d
BD
270/* Enable SPI support */
271#ifdef CONFIG_OF_CONTROL
272#define CONFIG_DM_SPI
273#define CONFIG_CMD_SPI
274#define CONFIG_FSL_DSPI
275#endif
276
e7b860fa 277#endif /* __CONFIG_H */