[people/ms/u-boot.git] / include / configs / digsy_mtc.h

/*
 * (C) Copyright 2003-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * (C) Copyright 2005-2007
 * Modified for InterControl digsyMTC MPC5200 board by
 * Frank Bodammer, GCD Hard- & Software GmbH,
 *                 frank.bodammer@gcd-solutions.de
 *
 * (C) Copyright 2009 Semihalf
 * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU */
#define CONFIG_DIGSY_MTC	1	/* ... on InterControl digsyMTC board */
#define CONFIG_DISPLAY_BOARDINFO

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFFF00000	boot high (standard configuration)
 * 0xFE000000	boot low
 * 0x00100000	boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
#endif

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000

#define CONFIG_SYS_CACHELINE_SIZE	32

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	4	/* console is on PSC4  */
#define CONFIG_BAUDRATE		115200	/* ... at 115200  bps  */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
#define CONFIG_PCI		1
#define CONFIG_PCI_PNP		1
#define CONFIG_PCI_SCAN_SHOW	1
#define CONFIG_PCI_BOOTDELAY	250

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000

/*
 *  Partitions
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_BZIP2

/*
 * Video
 */
#define CONFIG_VIDEO

#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
#define CONFIG_VIDEO_MB862xx_ACCEL
#define CONFIG_VIDEO_CORALP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */

/* Coral-PA clock frequency, geo and other both 133MHz */
#define CONFIG_SYS_MB862xx_CCF	0x00050000
/* Video SDRAM parameters */
#define CONFIG_SYS_MB862xx_MMR	0x11d7fa72
#endif

/*
 * Command line configuration.
 */
#ifdef CONFIG_VIDEO
#define CONFIG_CMD_BMP
#endif
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB

#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
#define CONFIG_SYS_LOWBOOT	1
#endif

/*
 * Autobooting
 */
#define CONFIG_BOOTDELAY	1

#undef	CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fw_image=digsyMPC.img\0"					\
	"mtcb_start=mtc led diag orange; run mtcb_1\0"			\
	"mtcb_clearled=for x in user1 user2 usbpwr usbbusy; "		\
		"do mtc led $x; done\0"					\
	"mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; "	\
		"else run mtcb_fw; fi\0"				\
	"mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; "		\
		"else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0"	\
	"mtcb_update=mtc led user1 orange;"				\
		"while mtc key; do ; done; run mtcb_2;\0"		\
	"mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0"	\
	"mtcb_usb1=if fatload usb 0 400000 script.img; "		\
		"then run mtcb_doscript; else run mtcb_usb2; fi\0"	\
	"mtcb_usb2=if fatload usb 0 400000 $fw_image; "			\
		"then run mtcb_dousb; else run mtcb_ide; fi\0"		\
	"mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; "	\
		"run mtcb_wait_flickr mtcb_ds_1;\0"			\
	"mtcb_ds_1=if imi 400000; then mtc led usbbusy; "		\
		"source 400000; else run mtcb_error; fi\0"		\
	"mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0"	\
	"mtcb_du_1=if imi 400000; then run mtcb_du_2; "			\
		"else run mtcb_error; fi\0"				\
	"mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; "		\
		"run mtcb_checkfw\0"					\
	"mtcb_checkfw=if imi ff000000; then run mtcb_success; "		\
		"else run mtcb_error; fi\0"				\
	"mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0"	\
	"mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0"		\
	"mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
	"mtcb_uledflckr=mtc led user1 orange 11\0"			\
	"mtcb_error=mtc led user1 red\0"				\
	"mtcb_clear=erase ff000000 ff0fffff\0"				\
	"mtcb_prog=cp.b 400000 ff000000 ${filesize}\0"			\
	"mtcb_success=mtc led user1 green\0"				\
	"mtcb_ide=if fatload ide 0 400000 $fw_image;"			\
		"then run mtcb_doide; else run mtcb_error; fi\0"	\
	"mtcb_doide=mtc led user2 green 1;"				\
		"run mtcb_wait_flickr mtcb_di_1;\0"			\
	"mtcb_di_1=if imi 400000; then run mtcb_di_2;"			\
		"else run mtcb_error; fi\0"				\
	"mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0"	\
	"ramdisk_num_sector=16\0"					\
	"flash_base=ff000000\0"						\
	"flashdisk_size=e00000\0"					\
	"env_sector=fff60000\0"						\
	"flashdisk_start=ff100000\0"					\
	"load_cmd=tftp 400000 digsyMPC.img\0"				\
	"clear_cmd=erase ff000000 ff0fffff\0"				\
	"flash_cmd=cp.b 400000 ff000000 ${filesize}\0"			\
	"update_cmd=run load_cmd; "					\
	"iminfo 400000; "						\
	"run clear_cmd flash_cmd; "					\
	"iminfo ff000000\0"						\
	"spi_driver=yes\0"						\
	"spi_watchdog=no\0"						\
	"ftps_start=yes\0"						\
	"ftps_user1=admin\0"						\
	"ftps_pass1=admin\0"						\
	"ftps_base1=/\0"						\
	"ftps_home1=/\0"						\
	"plc_sio_srv=no\0"						\
	"plc_sio_baud=57600\0"						\
	"plc_sio_parity=no\0"						\
	"plc_sio_stop=1\0"						\
	"plc_sio_com=2\0"						\
	"plc_eth_srv=yes\0"						\
	"plc_eth_port=1200\0"						\
	"plc_root=/ide/\0"						\
	"diag_level=0\0"						\
	"webvisu=no\0"							\
	"plc_can1_routing=no\0"						\
	"plc_can1_baudrate=250\0"					\
	"plc_can2_routing=no\0"						\
	"plc_can2_baudrate=250\0"					\
	"plc_can3_routing=no\0"						\
	"plc_can3_baudrate=250\0"					\
	"plc_can4_routing=no\0"						\
	"plc_can4_baudrate=250\0"					\
	"netdev=eth0\0"							\
	"console=ttyPSC0\0"						\
	"kernel_addr_r=400000\0"					\
	"fdt_addr_r=600000\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
	"nfsroot=${serverip}:${rootpath}\0"				\
	"addip=setenv bootargs ${bootargs} "				\
	"ip=${ipaddr}:${serverip}:${gatewayip}:"			\
	"${netmask}:${hostname}:${netdev}:off panic=1\0"		\
	"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"tftp ${fdt_addr_r} ${fdt_file};"			\
		"run nfsargs addip addcons;"				\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=protect off FFF00000 +${filesize};"			\
		"erase FFF00000 +${filesize};"				\
		"cp.b 200000 FFF00000 ${filesize};"			\
		"protect on FFF00000 +${filesize}\0"			\
	""

#define CONFIG_BOOTCOMMAND	"run mtcb_start"

/*
 * SPI configuration
 */
#define CONFIG_HARD_SPI		1
#define CONFIG_MPC52XX_SPI	1

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1
#define CONFIG_SYS_I2C_MODULE	1
#define CONFIG_SYS_I2C_SPEED	100000
#define CONFIG_SYS_I2C_SLAVE	0x7F

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 	1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70

/*
 * RTC configuration
 */
#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_I2C_RTC_ADDR	0x56
#define CONFIG_RTC_RV3029
/* Enable 5k Ohm trickle charge resistor */
#define CONFIG_SYS_RV3029_TCR	0x20
#else
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_DS1339_TCR_VAL	0xAB	/* diode + 4k resistor */
#endif

/*
 * Flash configuration
 */
#define	CONFIG_SYS_FLASH_CFI		1
#define	CONFIG_FLASH_CFI_DRIVER	1

#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_FLASH_BASE		0xFE000000
#define CONFIG_SYS_FLASH_BASE_CS1	0xFC000000
#define CONFIG_SYS_MAX_FLASH_BANKS	2
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, \
					CONFIG_SYS_FLASH_BASE_CS1}
#define CONFIG_SYS_UPDATE_FLASH_SIZE
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
#else
#define CONFIG_SYS_FLASH_BASE		0xFF000000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#endif

#define CONFIG_SYS_MAX_FLASH_SECT	256
#define CONFIG_FLASH_16BIT
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE	0x01000000
#define CONFIG_SYS_FLASH_ERASE_TOUT	240000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

#define CONFIG_OF_LIBFDT  1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_CPU			"PowerPC,5200@0"
#define OF_SOC			"soc5200@f0000000"
#define OF_TBCLK		(bd->bi_busfreq / 4)

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#if defined(CONFIG_LOWBOOT)
#define CONFIG_ENV_ADDR		0xFF060000
#else	/* CONFIG_LOWBOOT */
#define CONFIG_ENV_ADDR		0xFFF60000
#endif	/* CONFIG_LOWBOOT */
#define CONFIG_ENV_SIZE		0x10000
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OVERWRITE	1

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#if !defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
#else
#define CONFIG_SYS_DEFAULT_MBAR	0xF0000000
#endif

/*
 *  Use SRAM until RAM will be available
 */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE

#define CONFIG_SYS_GBL_DATA_OFFSET	\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN	(256 << 10)
#define CONFIG_SYS_MALLOC_LEN	(4096 << 10)
#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
#define CONFIG_MPC5xxx_FEC_MII100
#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_PHY_ADDR		0x01
#else
#define CONFIG_PHY_ADDR		0x00
#endif
#define CONFIG_PHY_RESET_DELAY	1000

#define CONFIG_NETCONSOLE		/* include NetConsole support	*/

/*
 * GPIO configuration
 * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
 *  Bit 0   (mask 0x80000000) : 0x1
 * SPI on Tmr2/3/4/5 pins
 *  Bit 2:3 (mask 0x30000000) : 0x2
 * ATA cs0/1 on csb_4/5
 *  Bit 6:7 (mask 0x03000000) : 0x2
 * Ethernet 100Mbit with MD
 *  Bits 12:15 (mask 0x000f0000): 0x5
 * USB - Two UARTs
 *  Bits 18:19 (mask 0x00003000) : 0x2
 * PSC3 - USB2 on PSC3
 *  Bits 20:23 (mask 0x00000f00) : 0x1
 * PSC2 - CAN1&2 on PSC2 pins
 *  Bits 25:27 (mask 0x00000070) : 0x1
 * PSC1 - AC97 functionality
 *  Bits 29:31 (mask 0x00000007) : 0x2
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0xA2552112

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE	1
#define CONFIG_CMDLINE_EDITING	1
#define CONFIG_SYS_HUSH_PARSER

#define CONFIG_LOOPW		1
#define CONFIG_MX_CYCLIC	1
#define CONFIG_ZERO_BOOTDELAY_CHECK

#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		32
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH	0x00001000
#define CONFIG_SYS_MEMTEST_START	0x00010000
#define CONFIG_SYS_MEMTEST_END		0x019fffff

#define CONFIG_SYS_LOAD_ADDR		0x00100000

/*
 * Various low-level settings
 */
#define CONFIG_SYS_SDRAM_CS1		1
#define CONFIG_SYS_XLB_PIPELINING	1

#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#if defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG		0x0002DD00
#endif

#define CONFIG_SYS_CS4_START		0x60000000
#define CONFIG_SYS_CS4_SIZE		0x1000
#define CONFIG_SYS_CS4_CFG		0x0008FC00

#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS0_CFG		0x0002DD00

#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE_CS1
#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS1_CFG		0x0002DD00
#endif

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE	0x11111111

#if !defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
#else
#define CONFIG_SYS_RESET_ADDRESS	0xff000100
#endif

/*
 * USB
 */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE

#define CONFIG_USB_CLOCK	0x00013333
#define CONFIG_USB_CONFIG	0x00002000

#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
#define CONFIG_SYS_USB_OHCI_REGS_BASE	MPC5XXX_USB
#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"mpc5200"
#define CONFIG_SYS_USB_OHCI_CPU_INIT

/*
 * IDE/ATA
 */
#define CONFIG_IDE_RESET
#define CONFIG_IDE_PREINIT

#define CONFIG_SYS_ATA_CS_ON_I2C2
#define CONFIG_SYS_IDE_MAXBUS		1
#define CONFIG_SYS_IDE_MAXDEVICE	1

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
#define CONFIG_SYS_ATA_STRIDE		4

#define CONFIG_ATAPI		1
#define CONFIG_LBA48		1

#endif /* __CONFIG_H */
Commit	Line	Data
5c4fa9b4 GB	1	/*
	2	* (C) Copyright 2003-2004
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* (C) Copyright 2005-2007
	6	* Modified for InterControl digsyMTC MPC5200 board by
	7	* Frank Bodammer, GCD Hard- & Software GmbH,
	8	* frank.bodammer@gcd-solutions.de
	9	*
	10	* (C) Copyright 2009 Semihalf
	11	* Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
	12	*
1a459660	13	* SPDX-License-Identifier: GPL-2.0+
5c4fa9b4 GB	14	*/
	15
	16	#ifndef __CONFIG_H
	17	#define __CONFIG_H
	18
	19	/*
	20	* High Level Configuration Options
	21	*/
	22
b2a6dfe4	23	#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
5c4fa9b4	24	#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */
77d4357d	25	#define CONFIG_DISPLAY_BOARDINFO
5c4fa9b4	26
2ae18241 WD	27	/*
	28	* Valid values for CONFIG_SYS_TEXT_BASE are:
	29	* 0xFFF00000 boot high (standard configuration)
	30	* 0xFE000000 boot low
	31	* 0x00100000 boot from RAM (for testing only)
	32	*/
	33	#ifndef CONFIG_SYS_TEXT_BASE
	34	#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
	35	#endif
	36
5c4fa9b4 GB	37	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
5c4fa9b4 GB	38
5c4fa9b4 GB	39	#define CONFIG_SYS_CACHELINE_SIZE 32
	40
	41	/*
	42	* Serial console configuration
	43	*/
	44	#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */
	45	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	46	#define CONFIG_SYS_BAUDRATE_TABLE \
	47	{ 9600, 19200, 38400, 57600, 115200, 230400 }
	48
	49	/*
	50	* PCI Mapping:
	51	* 0x40000000 - 0x4fffffff - PCI Memory
	52	* 0x50000000 - 0x50ffffff - PCI IO Space
	53	*/
	54	#define CONFIG_PCI 1
	55	#define CONFIG_PCI_PNP 1
	56	#define CONFIG_PCI_SCAN_SHOW 1
4fc823dd	57	#define CONFIG_PCI_BOOTDELAY 250
5c4fa9b4 GB	58
	59	#define CONFIG_PCI_MEM_BUS 0x40000000
	60	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	61	#define CONFIG_PCI_MEM_SIZE 0x10000000
	62
	63	#define CONFIG_PCI_IO_BUS 0x50000000
	64	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	65	#define CONFIG_PCI_IO_SIZE 0x01000000
	66
	67	/*
	68	* Partitions
	69	*/
	70	#define CONFIG_DOS_PARTITION
	71	#define CONFIG_BZIP2
	72
a59996e3 AG	73	/*
	74	* Video
	75	*/
	76	#define CONFIG_VIDEO
	77
	78	#ifdef CONFIG_VIDEO
	79	#define CONFIG_VIDEO_MB862xx
	80	#define CONFIG_VIDEO_MB862xx_ACCEL
	81	#define CONFIG_VIDEO_CORALP
	82	#define CONFIG_CFB_CONSOLE
	83	#define CONFIG_VIDEO_LOGO
348de314	84	#define CONFIG_VIDEO_BMP_LOGO
a59996e3 AG	85	#define CONFIG_VIDEO_SW_CURSOR
	86	#define CONFIG_VGA_AS_SINGLE_DEVICE
	87	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	88	#define CONFIG_SPLASH_SCREEN
	89	#define CONFIG_VIDEO_BMP_GZIP
	90	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
	91
	92	/* Coral-PA clock frequency, geo and other both 133MHz */
	93	#define CONFIG_SYS_MB862xx_CCF 0x00050000
	94	/* Video SDRAM parameters */
	95	#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
	96	#endif
	97
5c4fa9b4 GB	98	/*
	99	* Command line configuration.
	100	*/
a59996e3 AG	101	#ifdef CONFIG_VIDEO
	102	#define CONFIG_CMD_BMP
	103	#endif
5c4fa9b4 GB	104	#define CONFIG_CMD_CACHE
	105	#define CONFIG_CMD_DATE
	106	#define CONFIG_CMD_DHCP
	107	#define CONFIG_CMD_DIAG
	108	#define CONFIG_CMD_EEPROM
5c4fa9b4 GB	109	#define CONFIG_CMD_EXT2
	110	#define CONFIG_CMD_FAT
	111	#define CONFIG_CMD_I2C
	112	#define CONFIG_CMD_IDE
	113	#define CONFIG_CMD_IRQ
	114	#define CONFIG_CMD_MII
	115	#define CONFIG_CMD_PCI
	116	#define CONFIG_CMD_PING
	117	#define CONFIG_CMD_REGINFO
	118	#define CONFIG_CMD_SAVES
f1f66edf	119	#define CONFIG_CMD_SPI
5c4fa9b4 GB	120	#define CONFIG_CMD_USB
5c4fa9b4 GB	121
14d0a02a	122	#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
5c4fa9b4 GB	123	#define CONFIG_SYS_LOWBOOT 1
	124	#endif
	125
	126	/*
	127	* Autobooting
	128	*/
	129	#define CONFIG_BOOTDELAY 1
	130
	131	#undef CONFIG_BOOTARGS
	132
ff27650b DZ	133	#define CONFIG_EXTRA_ENV_SETTINGS \
	134	"fw_image=digsyMPC.img\0" \
	135	"mtcb_start=mtc led diag orange; run mtcb_1\0" \
	136	"mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \
	137	"do mtc led $x; done\0" \
	138	"mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \
	139	"else run mtcb_fw; fi\0" \
	140	"mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \
	141	"else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \
	142	"mtcb_update=mtc led user1 orange;" \
	143	"while mtc key; do ; done; run mtcb_2;\0" \
	144	"mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \
	145	"mtcb_usb1=if fatload usb 0 400000 script.img; " \
	146	"then run mtcb_doscript; else run mtcb_usb2; fi\0" \
	147	"mtcb_usb2=if fatload usb 0 400000 $fw_image; " \
	148	"then run mtcb_dousb; else run mtcb_ide; fi\0" \
	149	"mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \
	150	"run mtcb_wait_flickr mtcb_ds_1;\0" \
	151	"mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \
	152	"source 400000; else run mtcb_error; fi\0" \
	153	"mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \
	154	"mtcb_du_1=if imi 400000; then run mtcb_du_2; " \
	155	"else run mtcb_error; fi\0" \
	156	"mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \
	157	"run mtcb_checkfw\0" \
	158	"mtcb_checkfw=if imi ff000000; then run mtcb_success; " \
	159	"else run mtcb_error; fi\0" \
	160	"mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
	161	"mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \
	162	"mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
	163	"mtcb_uledflckr=mtc led user1 orange 11\0" \
	164	"mtcb_error=mtc led user1 red\0" \
	165	"mtcb_clear=erase ff000000 ff0fffff\0" \
	166	"mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \
	167	"mtcb_success=mtc led user1 green\0" \
	168	"mtcb_ide=if fatload ide 0 400000 $fw_image;" \
	169	"then run mtcb_doide; else run mtcb_error; fi\0" \
	170	"mtcb_doide=mtc led user2 green 1;" \
	171	"run mtcb_wait_flickr mtcb_di_1;\0" \
	172	"mtcb_di_1=if imi 400000; then run mtcb_di_2;" \
	173	"else run mtcb_error; fi\0" \
	174	"mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \
	175	"ramdisk_num_sector=16\0" \
	176	"flash_base=ff000000\0" \
	177	"flashdisk_size=e00000\0" \
	178	"env_sector=fff60000\0" \
	179	"flashdisk_start=ff100000\0" \
	180	"load_cmd=tftp 400000 digsyMPC.img\0" \
	181	"clear_cmd=erase ff000000 ff0fffff\0" \
	182	"flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \
	183	"update_cmd=run load_cmd; " \
	184	"iminfo 400000; " \
	185	"run clear_cmd flash_cmd; " \
	186	"iminfo ff000000\0" \
	187	"spi_driver=yes\0" \
	188	"spi_watchdog=no\0" \
	189	"ftps_start=yes\0" \
	190	"ftps_user1=admin\0" \
	191	"ftps_pass1=admin\0" \
	192	"ftps_base1=/\0" \
	193	"ftps_home1=/\0" \
	194	"plc_sio_srv=no\0" \
	195	"plc_sio_baud=57600\0" \
	196	"plc_sio_parity=no\0" \
197	"plc_sio_stop=1\0" \
198	"plc_sio_com=2\0" \
199	"plc_eth_srv=yes\0" \
200	"plc_eth_port=1200\0" \
201	"plc_root=/ide/\0" \
202	"diag_level=0\0" \
203	"webvisu=no\0" \
204	"plc_can1_routing=no\0" \
205	"plc_can1_baudrate=250\0" \
206	"plc_can2_routing=no\0" \
207	"plc_can2_baudrate=250\0" \
208	"plc_can3_routing=no\0" \
209	"plc_can3_baudrate=250\0" \
210	"plc_can4_routing=no\0" \
211	"plc_can4_baudrate=250\0" \
212	"netdev=eth0\0" \
213	"console=ttyPSC0\0" \
214	"kernel_addr_r=400000\0" \
215	"fdt_addr_r=600000\0" \
216	"nfsargs=setenv bootargs root=/dev/nfs rw " \
217	"nfsroot=${serverip}:${rootpath}\0" \
218	"addip=setenv bootargs ${bootargs} " \
219	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
220	"${netmask}:${hostname}:${netdev}:off panic=1\0" \
5c4fa9b4	221	"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
ff27650b DZ	222	"rootpath=/opt/eldk/ppc_6xx\0" \
	223	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	224	"tftp ${fdt_addr_r} ${fdt_file};" \
	225	"run nfsargs addip addcons;" \
	226	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	227	"load=tftp 200000 ${u-boot}\0" \
	228	"update=protect off FFF00000 +${filesize};" \
	229	"erase FFF00000 +${filesize};" \
	230	"cp.b 200000 FFF00000 ${filesize};" \
	231	"protect on FFF00000 +${filesize}\0" \
5c4fa9b4 GB	232	""
5c4fa9b4 GB	233
ff27650b DZ	234	#define CONFIG_BOOTCOMMAND "run mtcb_start"
ff27650b DZ	235
f1f66edf GB	236	/*
	237	* SPI configuration
	238	*/
	239	#define CONFIG_HARD_SPI 1
	240	#define CONFIG_MPC52XX_SPI 1
	241
5c4fa9b4 GB	242	/*
	243	* I2C configuration
	244	*/
	245	#define CONFIG_HARD_I2C 1
	246	#define CONFIG_SYS_I2C_MODULE 1
	247	#define CONFIG_SYS_I2C_SPEED 100000
	248	#define CONFIG_SYS_I2C_SLAVE 0x7F
	249
	250	/*
	251	* EEPROM configuration
	252	*/
	253	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	254	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	255	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	256	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
	257
	258	/*
	259	* RTC configuration
	260	*/
466f0137 HS	261	#if defined(CONFIG_DIGSY_REV5)
	262	#define CONFIG_SYS_I2C_RTC_ADDR 0x56
	263	#define CONFIG_RTC_RV3029
a01ebd96 HS	264	/* Enable 5k Ohm trickle charge resistor */
a01ebd96 HS	265	#define CONFIG_SYS_RV3029_TCR 0x20
466f0137	266	#else
5c4fa9b4 GB	267	#define CONFIG_RTC_DS1337
5c4fa9b4 GB	268	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
c569ad6e	269	#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */
466f0137	270	#endif
5c4fa9b4 GB	271
	272	/*
	273	* Flash configuration
	274	*/
	275	#define CONFIG_SYS_FLASH_CFI 1
	276	#define CONFIG_FLASH_CFI_DRIVER 1
	277
466f0137 HS	278	#if defined(CONFIG_DIGSY_REV5)
	279	#define CONFIG_SYS_FLASH_BASE 0xFE000000
	280	#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000
	281	#define CONFIG_SYS_MAX_FLASH_BANKS 2
927d2cea HS	282	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
927d2cea HS	283	CONFIG_SYS_FLASH_BASE_CS1}
466f0137 HS	284	#define CONFIG_SYS_UPDATE_FLASH_SIZE
	285	#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
	286	#else
5c4fa9b4	287	#define CONFIG_SYS_FLASH_BASE 0xFF000000
5c4fa9b4	288	#define CONFIG_SYS_MAX_FLASH_BANKS 1
466f0137 HS	289	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	290	#endif
	291
5c4fa9b4 GB	292	#define CONFIG_SYS_MAX_FLASH_SECT 256
	293	#define CONFIG_FLASH_16BIT
	294	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
466f0137	295	#define CONFIG_SYS_FLASH_SIZE 0x01000000
5c4fa9b4 GB	296	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
	297	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	298
	299	#define CONFIG_OF_LIBFDT 1
	300	#define CONFIG_OF_BOARD_SETUP 1
	301
	302	#define OF_CPU "PowerPC,5200@0"
	303	#define OF_SOC "soc5200@f0000000"
	304	#define OF_TBCLK (bd->bi_busfreq / 4)
	305
	306	#define CONFIG_BOARD_EARLY_INIT_R
	307	#define CONFIG_MISC_INIT_R
	308
	309	/*
	310	* Environment settings
	311	*/
	312	#define CONFIG_ENV_IS_IN_FLASH 1
	313	#if defined(CONFIG_LOWBOOT)
	314	#define CONFIG_ENV_ADDR 0xFF060000
	315	#else /* CONFIG_LOWBOOT */
	316	#define CONFIG_ENV_ADDR 0xFFF60000
	317	#endif /* CONFIG_LOWBOOT */
	318	#define CONFIG_ENV_SIZE 0x10000
	319	#define CONFIG_ENV_SECT_SIZE 0x20000
	320	#define CONFIG_ENV_OVERWRITE 1
	321
	322	/*
	323	* Memory map
	324	*/
	325	#define CONFIG_SYS_MBAR 0xF0000000
	326	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	327	#if !defined(CONFIG_SYS_LOWBOOT)
	328	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
	329	#else
	330	#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
	331	#endif
	332
	333	/*
	334	* Use SRAM until RAM will be available
	335	*/
	336	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
553f0982	337	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
5c4fa9b4	338
5c4fa9b4	339	#define CONFIG_SYS_GBL_DATA_OFFSET \
25ddd1fb	340	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
5c4fa9b4 GB	341	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
5c4fa9b4 GB	342
14d0a02a	343	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
5c4fa9b4 GB	344	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	345	#define CONFIG_SYS_RAMBOOT 1
	346	#endif
	347
	348	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	349	#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
	350	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
	351
	352	/*
	353	* Ethernet configuration
	354	*/
	355	#define CONFIG_MPC5xxx_FEC 1
	356	#define CONFIG_MPC5xxx_FEC_MII100
1b41493d HS	357	#if defined(CONFIG_DIGSY_REV5)
	358	#define CONFIG_PHY_ADDR 0x01
	359	#else
5c4fa9b4	360	#define CONFIG_PHY_ADDR 0x00
1b41493d	361	#endif
5c4fa9b4 GB	362	#define CONFIG_PHY_RESET_DELAY 1000
	363
	364	#define CONFIG_NETCONSOLE /* include NetConsole support */
	365
	366	/*
	367	* GPIO configuration
12602339 GB	368	* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
	369	* Bit 0 (mask 0x80000000) : 0x1
	370	* SPI on Tmr2/3/4/5 pins
	371	* Bit 2:3 (mask 0x30000000) : 0x2
	372	* ATA cs0/1 on csb_4/5
	373	* Bit 6:7 (mask 0x03000000) : 0x2
	374	* Ethernet 100Mbit with MD
	375	* Bits 12:15 (mask 0x000f0000): 0x5
	376	* USB - Two UARTs
	377	* Bits 18:19 (mask 0x00003000) : 0x2
	378	* PSC3 - USB2 on PSC3
	379	* Bits 20:23 (mask 0x00000f00) : 0x1
	380	* PSC2 - CAN1&2 on PSC2 pins
	381	* Bits 25:27 (mask 0x00000070) : 0x1
	382	* PSC1 - AC97 functionality
	383	* Bits 29:31 (mask 0x00000007) : 0x2
5c4fa9b4 GB	384	*/
	385	#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112
	386
	387	/*
	388	* Miscellaneous configurable options
	389	*/
	390	#define CONFIG_SYS_LONGHELP
	391	#define CONFIG_AUTO_COMPLETE 1
a781de12	392	#define CONFIG_CMDLINE_EDITING 1
5c4fa9b4	393	#define CONFIG_SYS_HUSH_PARSER
5c4fa9b4	394
5c4fa9b4 GB	395	#define CONFIG_LOOPW 1
	396	#define CONFIG_MX_CYCLIC 1
	397	#define CONFIG_ZERO_BOOTDELAY_CHECK
	398
	399	#define CONFIG_SYS_CBSIZE 1024
	400	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	401	#define CONFIG_SYS_MAXARGS 32
	402	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	403
	404	#define CONFIG_SYS_ALT_MEMTEST
	405	#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000
	406	#define CONFIG_SYS_MEMTEST_START 0x00010000
	407	#define CONFIG_SYS_MEMTEST_END 0x019fffff
	408
	409	#define CONFIG_SYS_LOAD_ADDR 0x00100000
	410
5c4fa9b4 GB	411	/*
	412	* Various low-level settings
	413	*/
	414	#define CONFIG_SYS_SDRAM_CS1 1
	415	#define CONFIG_SYS_XLB_PIPELINING 1
	416
	417	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	418	#define CONFIG_SYS_HID0_FINAL HID0_ICE
	419
	420	#if defined(CONFIG_SYS_LOWBOOT)
	421	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	422	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	423	#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
	424	#endif
	425
	426	#define CONFIG_SYS_CS4_START 0x60000000
	427	#define CONFIG_SYS_CS4_SIZE 0x1000
	428	#define CONFIG_SYS_CS4_CFG 0x0008FC00
	429
	430	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	431	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
	432	#define CONFIG_SYS_CS0_CFG 0x0002DD00
	433
466f0137 HS	434	#if defined(CONFIG_DIGSY_REV5)
	435	#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1
	436	#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
	437	#define CONFIG_SYS_CS1_CFG 0x0002DD00
	438	#endif
	439
5c4fa9b4 GB	440	#define CONFIG_SYS_CS_BURST 0x00000000
	441	#define CONFIG_SYS_CS_DEADCYCLE 0x11111111
	442
	443	#if !defined(CONFIG_SYS_LOWBOOT)
	444	#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
	445	#else
	446	#define CONFIG_SYS_RESET_ADDRESS 0xff000100
	447	#endif
	448
	449	/*
	450	* USB
	451	*/
	452	#define CONFIG_USB_OHCI_NEW
	453	#define CONFIG_SYS_OHCI_BE_CONTROLLER
	454	#define CONFIG_USB_STORAGE
	455
	456	#define CONFIG_USB_CLOCK 0x00013333
	457	#define CONFIG_USB_CONFIG 0x00002000
	458
	459	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
	460	#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
	461	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
	462	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	463
	464	/*
	465	* IDE/ATA
	466	*/
	467	#define CONFIG_IDE_RESET
	468	#define CONFIG_IDE_PREINIT
	469
	470	#define CONFIG_SYS_ATA_CS_ON_I2C2
	471	#define CONFIG_SYS_IDE_MAXBUS 1
	472	#define CONFIG_SYS_IDE_MAXDEVICE 1
	473
	474	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	475	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
	476	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
	477	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
	478	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
	479	#define CONFIG_SYS_ATA_STRIDE 4
	480
	481	#define CONFIG_ATAPI 1
	482	#define CONFIG_LBA48 1
	483
	484	#endif /* __CONFIG_H */