[people/ms/u-boot.git] / include / configs / flea3.h

/*
 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
 *
 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
 *
 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
 *
 * Configuration for the flea3 board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

 /* High Level Configuration Options */
#define CONFIG_ARM1136	/* This is an arm1136 CPU core */
#define CONFIG_MX35

#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_CACHELINE_SIZE	32

#define CONFIG_DISPLAY_CPUINFO

/* Only in case the value is not present in mach-types.h */
#ifndef MACH_TYPE_FLEA3
#define MACH_TYPE_FLEA3                3668
#endif

#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3

/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_SYS_TEXT_BASE	0xA0000000

/* This is required to setup the ESDC controller */
#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)

/*
 * Hardware drivers
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
#define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO

/*
 * UART (console)
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART3_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		115200

/*
 * Command definition
 */

#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS

#define CONFIG_CMD_NAND
#define CONFIG_CMD_CACHE

#define CONFIG_CMD_I2C
#define CONFIG_CMD_SPI
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_NET_RETRY_COUNT	100

#define CONFIG_BOOTDELAY	3

#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */


/*
 * Ethernet on SOC (FEC)
 */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE	FEC_BASE_ADDR
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_FEC_MXC_PHYADDR	0x1

#define CONFIG_MII

#define CONFIG_ARP_TIMEOUT	200UL

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP	/* undef to save memory */
#define CONFIG_SYS_PROMPT	"flea3 U-Boot > "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x10000

#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_GBL_DATA_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:50m(root1)," \
				"32m(rootfb)," \
				"64m(pcache)," \
				"64m(app1)," \
				"10m(app2),-(spool);" \
				"physmap-flash.0:512k(u-boot),64k(env1)," \
				"64k(env2),3776k(kernel1),3776k(kernel2)"

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
/* Monitor at beginning of flash */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
				CONFIG_SYS_MONITOR_LEN)

#define CONFIG_ENV_IS_IN_FLASH

/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
#define CONFIG_FLASH_CFI_DRIVER

/* A non-standard buffered write algorithm */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */

/*
 * NAND FLASH driver setup
 */
#define CONFIG_NAND_MXC
#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE

/*
 * Default environment and default scripts
 * to update uboot and load kernel
 */

#define CONFIG_HOSTNAME flea3
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"				\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttymxc2,${baudrate}\0"			\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"loadaddr=80800000\0"						\
	"kernel_addr_r=80800000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=if run net_self_load;then "				\
		"run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
		"else echo Images not loades;fi\0"			\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
	"update=protect off ${uboot_addr} +40000;"			\
		"erase ${uboot_addr} +40000;"				\
		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\
	"bootcmd=run net_nfs\0"

#endif				/* __CONFIG_H */
Commit	Line	Data
deb53483 SB	1	/*
	2	* (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
	3	*
	4	* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
	5	*
	6	* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
	7	*
	8	* Configuration for the flea3 board.
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
deb53483 SB	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
	15
	16	#include <asm/arch/imx-regs.h>
	17
	18	/* High Level Configuration Options */
	19	#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
	20	#define CONFIG_MX35
deb53483 SB	21
deb53483 SB	22	#define CONFIG_SYS_DCACHE_OFF
81b1c9eb	23	#define CONFIG_SYS_CACHELINE_SIZE 32
deb53483 SB	24
	25	#define CONFIG_DISPLAY_CPUINFO
	26
	27	/* Only in case the value is not present in mach-types.h */
	28	#ifndef MACH_TYPE_FLEA3
	29	#define MACH_TYPE_FLEA3 3668
	30	#endif
	31
	32	#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
	33
	34	/* Set TEXT at the beginning of the NOR flash */
	35	#define CONFIG_SYS_TEXT_BASE 0xA0000000
	36
deb53483 SB	37	/* This is required to setup the ESDC controller */
	38	#define CONFIG_BOARD_EARLY_INIT_F
	39
	40	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	41	#define CONFIG_REVISION_TAG
	42	#define CONFIG_SETUP_MEMORY_TAGS
	43	#define CONFIG_INITRD_TAG
	44
	45	/*
	46	* Size of malloc() pool
	47	*/
	48	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
	49
	50	/*
	51	* Hardware drivers
	52	*/
b089d039	53	#define CONFIG_SYS_I2C
	54	#define CONFIG_SYS_I2C_MXC
	55	#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
	56	#define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe
deb53483 SB	57	#define CONFIG_MXC_SPI
	58	#define CONFIG_MXC_GPIO
	59
	60	/*
	61	* UART (console)
	62	*/
	63	#define CONFIG_MXC_UART
40f6fffe	64	#define CONFIG_MXC_UART_BASE UART3_BASE
deb53483 SB	65
	66	/* allow to overwrite serial and ethaddr */
	67	#define CONFIG_ENV_OVERWRITE
	68	#define CONFIG_CONS_INDEX 1
	69	#define CONFIG_BAUDRATE 115200
deb53483 SB	70
	71	/*
	72	* Command definition
	73	*/
	74
	75	#include <config_cmd_default.h>
	76
	77	#define CONFIG_CMD_PING
	78	#define CONFIG_CMD_DHCP
	79	#define CONFIG_BOOTP_SUBNETMASK
	80	#define CONFIG_BOOTP_GATEWAY
	81	#define CONFIG_BOOTP_DNS
	82
	83	#define CONFIG_CMD_NAND
81b1c9eb	84	#define CONFIG_CMD_CACHE
deb53483 SB	85
	86	#define CONFIG_CMD_I2C
	87	#define CONFIG_CMD_SPI
	88	#define CONFIG_CMD_MII
	89	#define CONFIG_CMD_NET
	90	#define CONFIG_NET_RETRY_COUNT 100
	91
	92	#define CONFIG_BOOTDELAY 3
	93
fda241d5	94	#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
deb53483 SB	95
	96
	97	/*
	98	* Ethernet on SOC (FEC)
	99	*/
deb53483 SB	100	#define CONFIG_FEC_MXC
	101	#define IMX_FEC_BASE FEC_BASE_ADDR
	102	#define CONFIG_PHYLIB
	103	#define CONFIG_PHY_MICREL
	104	#define CONFIG_FEC_MXC_PHYADDR 0x1
	105
	106	#define CONFIG_MII
deb53483 SB	107
	108	#define CONFIG_ARP_TIMEOUT 200UL
	109
	110	/*
	111	* Miscellaneous configurable options
	112	*/
	113	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	114	#define CONFIG_SYS_PROMPT "flea3 U-Boot > "
	115	#define CONFIG_CMDLINE_EDITING
	116	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
deb53483 SB	117
	118	#define CONFIG_AUTO_COMPLETE
	119	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	120	/* Print Buffer Size */
	121	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	122	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	123	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	124
	125	#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
	126	#define CONFIG_SYS_MEMTEST_END 0x10000
	127
	128	#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
	129
	130	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	131
deb53483 SB	132	/*
	133	* Physical Memory Map
	134	*/
	135	#define CONFIG_NR_DRAM_BANKS 1
fda241d5	136	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
deb53483 SB	137	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
deb53483 SB	138
fda241d5	139	#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
deb53483 SB	140	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
	141	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
	142	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	143	GENERATED_GBL_DATA_SIZE)
	144	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	145	CONFIG_SYS_GBL_DATA_OFFSET)
	146
	147	/*
	148	* MTD Command for mtdparts
	149	*/
	150	#define CONFIG_CMD_MTDPARTS
	151	#define CONFIG_MTD_DEVICE
	152	#define CONFIG_FLASH_CFI_MTD
	153	#define CONFIG_MTD_PARTITIONS
	154	#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
fda241d5 SB	155	#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \
	156	"32m(rootfb)," \
	157	"64m(pcache)," \
	158	"64m(app1)," \
	159	"10m(app2),-(spool);" \
deb53483 SB	160	"physmap-flash.0:512k(u-boot),64k(env1)," \
deb53483 SB	161	"64k(env2),3776k(kernel1),3776k(kernel2)"
fda241d5	162
deb53483 SB	163	/*
	164	* FLASH and environment organization
	165	*/
	166	#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
	167	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	168	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	169	/* Monitor at beginning of flash */
	170	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	171	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	172
	173	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	174	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	175
	176	/* Address and size of Redundant Environment Sector */
	177	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	178	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	179
	180	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
	181	CONFIG_SYS_MONITOR_LEN)
	182
	183	#define CONFIG_ENV_IS_IN_FLASH
	184
	185	/*
	186	* CFI FLASH driver setup
	187	*/
	188	#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
	189	#define CONFIG_FLASH_CFI_DRIVER
	190
	191	/* A non-standard buffered write algorithm */
	192	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
	193	#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
	194
	195	/*
	196	* NAND FLASH driver setup
	197	*/
	198	#define CONFIG_NAND_MXC
deb53483 SB	199	#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
	200	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	201	#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
	202	#define CONFIG_MXC_NAND_HWECC
	203	#define CONFIG_SYS_NAND_LARGEPAGE
	204
	205	/*
	206	* Default environment and default scripts
	207	* to update uboot and load kernel
	208	*/
deb53483 SB	209
	210	#define CONFIG_HOSTNAME flea3
	211	#define CONFIG_EXTRA_ENV_SETTINGS \
	212	"netdev=eth0\0" \
	213	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	214	"nfsroot=${serverip}:${rootpath}\0" \
	215	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	216	"addip_sta=setenv bootargs ${bootargs} " \
	217	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	218	":${hostname}:${netdev}:off panic=1\0" \
	219	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
	220	"addip=if test -n ${ipdyn};then run addip_dyn;" \
93ea89f0	221	"else run addip_sta;fi\0" \
deb53483 SB	222	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
deb53483 SB	223	"addtty=setenv bootargs ${bootargs}" \
fda241d5	224	" console=ttymxc2,${baudrate}\0" \
deb53483	225	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
fda241d5 SB	226	"loadaddr=80800000\0" \
fda241d5 SB	227	"kernel_addr_r=80800000\0" \
93ea89f0 MV	228	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	229	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	230	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
deb53483 SB	231	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	232	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	233	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	234	"bootm ${kernel_addr}\0" \
	235	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	236	"run nfsargs addip addtty addmtd addmisc;" \
	237	"bootm ${kernel_addr_r}\0" \
	238	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	239	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	240	"net_self=if run net_self_load;then " \
	241	"run ramargs addip addtty addmtd addmisc;" \
	242	"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
	243	"else echo Images not loades;fi\0" \
93ea89f0	244	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
deb53483	245	"load=tftp ${loadaddr} ${u-boot}\0" \
93ea89f0	246	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
deb53483 SB	247	"update=protect off ${uboot_addr} +40000;" \
	248	"erase ${uboot_addr} +40000;" \
	249	"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
	250	"upd=if run load;then echo Updating u-boot;if run update;" \
	251	"then echo U-Boot updated;" \
	252	"else echo Error updating u-boot !;" \
	253	"echo Board without bootloader !!;" \
	254	"fi;" \
	255	"else echo U-Boot not downloaded..exiting;fi\0" \
	256	"bootcmd=run net_nfs\0"
	257
	258	#endif /* __CONFIG_H */