[people/ms/u-boot.git] / include / configs / flea3.h

/*
 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
 *
 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
 *
 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
 *
 * Configuration for the flea3 board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

 /* High Level Configuration Options */
#define CONFIG_MX35

#define CONFIG_SYS_DCACHE_OFF

#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3

/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_SYS_TEXT_BASE	0xA0000000

/* This is required to setup the ESDC controller */

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)

/*
 * Hardware drivers
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
#define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO

/*
 * UART (console)
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART3_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1

/*
 * Command definition
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS

#define CONFIG_NET_RETRY_COUNT	100


#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */

/*
 * Ethernet on SOC (FEC)
 */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE	FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR	0x1

#define CONFIG_MII

#define CONFIG_ARP_TIMEOUT	200UL

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP	/* undef to save memory */
#define CONFIG_CMDLINE_EDITING

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x10000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_GBL_DATA_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_MTD_DEVICE
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_PARTITIONS

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
/* Monitor at beginning of flash */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
				CONFIG_SYS_MONITOR_LEN)

/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
#define CONFIG_FLASH_CFI_DRIVER

/* A non-standard buffered write algorithm */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */

/*
 * NAND FLASH driver setup
 */
#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE

/*
 * Default environment and default scripts
 * to update uboot and load kernel
 */

#define CONFIG_HOSTNAME flea3
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"				\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttymxc2,${baudrate}\0"			\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"loadaddr=80800000\0"						\
	"kernel_addr_r=80800000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=if run net_self_load;then "				\
		"run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
		"else echo Images not loades;fi\0"			\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
	"update=protect off ${uboot_addr} +80000;"			\
		"erase ${uboot_addr} +80000;"				\
		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\
	"bootcmd=run net_nfs\0"

#endif				/* __CONFIG_H */
Commit	Line	Data
deb53483 SB	1	/*
	2	* (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
	3	*
	4	* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
	5	*
	6	* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
	7	*
	8	* Configuration for the flea3 board.
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
deb53483 SB	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
	15
	16	#include <asm/arch/imx-regs.h>
	17
	18	/* High Level Configuration Options */
deb53483	19	#define CONFIG_MX35
deb53483 SB	20
	21	#define CONFIG_SYS_DCACHE_OFF
	22
deb53483 SB	23	#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
	24
	25	/* Set TEXT at the beginning of the NOR flash */
	26	#define CONFIG_SYS_TEXT_BASE 0xA0000000
	27
deb53483	28	/* This is required to setup the ESDC controller */
deb53483 SB	29
	30	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	31	#define CONFIG_REVISION_TAG
	32	#define CONFIG_SETUP_MEMORY_TAGS
	33	#define CONFIG_INITRD_TAG
	34
	35	/*
	36	* Size of malloc() pool
	37	*/
	38	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
	39
	40	/*
	41	* Hardware drivers
	42	*/
b089d039	43	#define CONFIG_SYS_I2C
b089d039	44	#define CONFIG_SYS_I2C_MXC
03544c66 AA	45	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	46	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	47	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
b089d039	48	#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
b089d039	49	#define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe
deb53483 SB	50	#define CONFIG_MXC_SPI
	51	#define CONFIG_MXC_GPIO
	52
	53	/*
	54	* UART (console)
	55	*/
	56	#define CONFIG_MXC_UART
40f6fffe	57	#define CONFIG_MXC_UART_BASE UART3_BASE
deb53483 SB	58
	59	/* allow to overwrite serial and ethaddr */
	60	#define CONFIG_ENV_OVERWRITE
	61	#define CONFIG_CONS_INDEX 1
deb53483 SB	62
	63	/*
	64	* Command definition
	65	*/
deb53483 SB	66	#define CONFIG_BOOTP_SUBNETMASK
	67	#define CONFIG_BOOTP_GATEWAY
	68	#define CONFIG_BOOTP_DNS
	69
deb53483 SB	70	#define CONFIG_NET_RETRY_COUNT 100
deb53483 SB	71
deb53483	72
fda241d5	73	#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
deb53483	74
deb53483 SB	75	/*
	76	* Ethernet on SOC (FEC)
	77	*/
deb53483 SB	78	#define CONFIG_FEC_MXC
deb53483 SB	79	#define IMX_FEC_BASE FEC_BASE_ADDR
deb53483 SB	80	#define CONFIG_FEC_MXC_PHYADDR 0x1
	81
	82	#define CONFIG_MII
deb53483 SB	83
	84	#define CONFIG_ARP_TIMEOUT 200UL
	85
	86	/*
	87	* Miscellaneous configurable options
	88	*/
	89	#define CONFIG_SYS_LONGHELP /* undef to save memory */
deb53483	90	#define CONFIG_CMDLINE_EDITING
deb53483 SB	91
deb53483 SB	92	#define CONFIG_AUTO_COMPLETE
45a3ad81	93	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
deb53483	94	/* Print Buffer Size */
45a3ad81	95	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
deb53483 SB	96
	97	#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
	98	#define CONFIG_SYS_MEMTEST_END 0x10000
	99
deb53483 SB	100	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
deb53483 SB	101
deb53483 SB	102	/*
	103	* Physical Memory Map
	104	*/
	105	#define CONFIG_NR_DRAM_BANKS 1
fda241d5	106	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
deb53483 SB	107	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
deb53483 SB	108
fda241d5	109	#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
deb53483 SB	110	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
	111	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
	112	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	113	GENERATED_GBL_DATA_SIZE)
	114	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	115	CONFIG_SYS_GBL_DATA_OFFSET)
	116
	117	/*
	118	* MTD Command for mtdparts
	119	*/
deb53483 SB	120	#define CONFIG_MTD_DEVICE
	121	#define CONFIG_FLASH_CFI_MTD
	122	#define CONFIG_MTD_PARTITIONS
fda241d5	123
deb53483 SB	124	/*
	125	* FLASH and environment organization
	126	*/
	127	#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
	128	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	129	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	130	/* Monitor at beginning of flash */
	131	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	132	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	133
	134	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	135	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	136
	137	/* Address and size of Redundant Environment Sector */
	138	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	139	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	140
	141	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
	142	CONFIG_SYS_MONITOR_LEN)
	143
deb53483 SB	144	/*
	145	* CFI FLASH driver setup
	146	*/
	147	#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
	148	#define CONFIG_FLASH_CFI_DRIVER
	149
	150	/* A non-standard buffered write algorithm */
	151	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
	152	#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
	153
	154	/*
	155	* NAND FLASH driver setup
	156	*/
deb53483 SB	157	#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
	158	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	159	#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
	160	#define CONFIG_MXC_NAND_HWECC
	161	#define CONFIG_SYS_NAND_LARGEPAGE
	162
	163	/*
	164	* Default environment and default scripts
	165	* to update uboot and load kernel
	166	*/
deb53483 SB	167
	168	#define CONFIG_HOSTNAME flea3
	169	#define CONFIG_EXTRA_ENV_SETTINGS \
	170	"netdev=eth0\0" \
	171	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	172	"nfsroot=${serverip}:${rootpath}\0" \
	173	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	174	"addip_sta=setenv bootargs ${bootargs} " \
	175	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	176	":${hostname}:${netdev}:off panic=1\0" \
	177	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
	178	"addip=if test -n ${ipdyn};then run addip_dyn;" \
93ea89f0	179	"else run addip_sta;fi\0" \
deb53483 SB	180	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
deb53483 SB	181	"addtty=setenv bootargs ${bootargs}" \
fda241d5	182	" console=ttymxc2,${baudrate}\0" \
deb53483	183	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
fda241d5 SB	184	"loadaddr=80800000\0" \
fda241d5 SB	185	"kernel_addr_r=80800000\0" \
93ea89f0 MV	186	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	187	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	188	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
deb53483 SB	189	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	190	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	191	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	192	"bootm ${kernel_addr}\0" \
	193	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	194	"run nfsargs addip addtty addmtd addmisc;" \
	195	"bootm ${kernel_addr_r}\0" \
	196	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	197	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	198	"net_self=if run net_self_load;then " \
	199	"run ramargs addip addtty addmtd addmisc;" \
	200	"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
	201	"else echo Images not loades;fi\0" \
93ea89f0	202	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
deb53483	203	"load=tftp ${loadaddr} ${u-boot}\0" \
93ea89f0	204	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
45a3ad81 HS	205	"update=protect off ${uboot_addr} +80000;" \
45a3ad81 HS	206	"erase ${uboot_addr} +80000;" \
deb53483 SB	207	"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
	208	"upd=if run load;then echo Updating u-boot;if run update;" \
	209	"then echo U-Boot updated;" \
	210	"else echo Error updating u-boot !;" \
	211	"echo Board without bootloader !!;" \
	212	"fi;" \
	213	"else echo U-Boot not downloaded..exiting;fi\0" \
	214	"bootcmd=run net_nfs\0"
	215
	216	#endif /* __CONFIG_H */