]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/integratorap.h
imx6: move MXC_GPIO define to mx6_common.h
[people/ms/u-boot.git] / include / configs / integratorap.h
CommitLineData
3d3befa7
WD
1/*
2 * (C) Copyright 2003
3 * Texas Instruments.
4 * Kshitij Gupta <kshitij@ti.com>
5 * Configuation settings for the TI OMAP Innovator board.
6 *
7 * (C) Copyright 2004
8 * ARM Ltd.
9 * Philippe Robin, <philippe.robin@arm.com>
10 * Configuration for Integrator AP board.
11 *.
3765b3e7 12 * SPDX-License-Identifier: GPL-2.0+
3d3befa7 13 */
fe7eb5d8 14
3d3befa7
WD
15#ifndef __CONFIG_H
16#define __CONFIG_H
23b3ae0f 17
e62b008f
LW
18#include "integrator-common.h"
19
20/* Integrator/AP-specific configuration */
6d0f6bcf 21#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
3d3befa7
WD
22
23/*
24 * PL010 Configuration
25 */
48d0192f 26#define CONFIG_PL010_SERIAL
3d3befa7 27#define CONFIG_CONS_INDEX 0
716c1dcb 28#define CONFIG_BAUDRATE 38400
6d0f6bcf 29#define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
6d0f6bcf
JCPV
30#define CONFIG_SYS_SERIAL0 0x16000000
31#define CONFIG_SYS_SERIAL1 0x17000000
3d3befa7 32
3d3befa7 33
079a136c
JL
34/*
35 * BOOTP options
36 */
37#define CONFIG_BOOTP_BOOTFILESIZE
38#define CONFIG_BOOTP_BOOTPATH
39#define CONFIG_BOOTP_GATEWAY
40#define CONFIG_BOOTP_HOSTNAME
41
42
1d2c6bc4
JL
43/*
44 * Command line configuration.
45 */
2458716a 46#include <config_cmd_default.h>
3d3befa7 47
716c1dcb 48#define CONFIG_BOOTDELAY 2
bc87d764 49#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty"
716c1dcb 50#define CONFIG_BOOTCOMMAND ""
3d3befa7
WD
51
52/*
53 * Miscellaneous configurable options
54 */
6d0f6bcf 55#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
3d3befa7 56
a7b00a7b
LW
57/* Flash settings */
58#define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */
6d0f6bcf 59#define CONFIG_SYS_MAX_FLASH_SECT 128
a7b00a7b 60#define CONFIG_ENV_IS_NOWHERE 1
46937b27 61#define CONFIG_ENV_SIZE 32768
3d3befa7 62
3d3befa7
WD
63/*-----------------------------------------------------------------------
64 * PCI definitions
65 */
66
2458716a
LW
67#define CONFIG_PCI
68#define CONFIG_CMD_PCI
69#define CONFIG_PCI_PNP
3d3befa7 70
2458716a
LW
71#define CONFIG_NET_MULTI
72#define CONFIG_TULIP
3d3befa7 73#define CONFIG_EEPRO100
6d0f6bcf 74#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
3d3befa7 75
3d3befa7 76
74f4304e
WD
77/*-----------------------------------------------------------------------
78 * There are various dependencies on the core module (CM) fitted
79 * Users should refer to their CM user guide
80 * - when porting adjust u-boot/Makefile accordingly
81 * to define the necessary CONFIG_ s for the CM involved
82 * see e.g. integratorcp_CM926EJ-S_config
83 */
9b880bd4 84#include "armcoremodule.h"
74f4304e 85
716c1dcb 86#endif /* __CONFIG_H */