[people/ms/u-boot.git] / include / configs / ipek01.h

/*
 * (C) Copyright 2006
 * MicroSys GmbH
 *
 * (C) Copyright 2009
 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#define CONFIG_MPC5200
#define CONFIG_MPX5200		1	/* MPX5200 board */
#define CONFIG_MPC5200_DDR	1	/* use DDR RAM */
#define CONFIG_IPEK01           	/* Motherboard is ipek01 */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_BOARDINFO

#define	CONFIG_SYS_TEXT_BASE	0xfc000000

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz */

#define CONFIG_MISC_INIT_R

#define CONFIG_SYS_CACHELINE_SIZE	32 /* For MPC5xxx CPUs */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CACHELINE_SHIFT	5  /* log base 2 of the above value */
#endif

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
#define CONFIG_BAUDRATE		115200	/* ... at 9600 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

#define CONFIG_CMDLINE_EDITING	1	/* add command line history */

/*
 * Video configuration for LIME GDC
 */
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
#define CONFIG_VIDEO_MB862xx_ACCEL
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */
/* Lime clock frequency */
#define CONFIG_SYS_MB862xx_CCF	0x90000	/* geo 166MHz other 133MHz */
/* SDRAM parameter */
#define CONFIG_SYS_MB862xx_MMR	0x41c767e3
#endif

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
#define CONFIG_PCI		1
#define CONFIG_PCI_PNP		1
#define CONFIG_PCI_SCAN_SHOW	1

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000

#define CONFIG_MII		1
#define CONFIG_EEPRO100		1
#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */

/* Partitions */
#define CONFIG_DOS_PARTITION

/* USB */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE

#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE		MPC5XXX_USB
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"mpc5200"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15

/*
 * Command line configuration.
 */
#ifdef CONFIG_VIDEO
#define CONFIG_CMD_BMP		/* BMP support */
#endif
#define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
#define CONFIG_CMD_DHCP		/* DHCP Support */
#define CONFIG_CMD_FAT		/* FAT support */
#define CONFIG_CMD_I2C		/* I2C serial bus support */
#define CONFIG_CMD_IDE		/* IDE harddisk support */
#define CONFIG_CMD_IRQ		/* irqinfo */
#define CONFIG_CMD_MII		/* MII support */
#define CONFIG_CMD_PCI		/* pciinfo */
#define CONFIG_CMD_USB		/* USB Support */

#define CONFIG_SYS_LOWBOOT	1

/*
 * Autobooting
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"consoledev=ttyPSC0\0"						\
	"hostname=ipek01\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs} "				\
		"console=${consoledev},${baudrate}\0"			\
	"flash_nfs=run nfsargs addip addtty;"				\
		"bootm ${kernel_addr} - ${fdtaddr}\0"			\
	"flash_self=run ramargs addip addtty;"				\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"	\
	"net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};"  \
		"run nfsargs addip addtty;"    				\
		 "bootm ${loadaddr} - ${fdtaddr}\0"			\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"bootfile=ipek01/uImage\0"					\
	"load=tftp 100000 ipek01/u-boot.bin\0"				\
	"update=protect off FC000000 +60000; era FC000000 +60000; "	\
		"cp.b 100000 FC000000 ${filesize}\0"   			\
	"upd=run load;run update\0"					\
	"fdtaddr=800000\0"						\
	"loadaddr=400000\0"						\
	"fdtfile=ipek01/ipek01.dtb\0"					\
	""

#define CONFIG_BOOTCOMMAND	"run flash_self"

/*
 * IPB Bus clocking configuration.
 */
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK 	/* for 133MHz */
/* PCI clock must be 33, because board will not boot */
#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* for 66MHz */

/*
 * Open firmware flat tree support
 */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_CPU			"PowerPC,5200@0"
#define OF_SOC			"soc5200@f0000000"
#define OF_TBCLK		(bd->bi_busfreq / 4)

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
#define CONFIG_SYS_I2C_MODULE	2	/* Select I2C module #1 or #2 */

#define CONFIG_SYS_I2C_SPEED	100000	/* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE	0x7F

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10

/*
 * RTC configuration
 */
#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR		0x51

#define CONFIG_SYS_FLASH_BASE		0xFC000000
#define CONFIG_SYS_FLASH_SIZE		0x01000000
#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
					 CONFIG_SYS_MONITOR_LEN)

#define CONFIG_SYS_MAX_FLASH_BANKS	1    /* max num of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT	256  /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_PROTECTION  /* "Real" (hardware) sectors protection */

/* use CFI flash driver */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_SIZE			0x10000
#define CONFIG_ENV_SECT_SIZE		0x20000
#define CONFIG_ENV_OVERWRITE		1
#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR			0xf0000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_DEFAULT_MBAR		0x80000000
#define	CONFIG_SYS_SRAM_BASE		0xF1000000
#define	CONFIG_SYS_SRAM_SIZE		0x00200000
#define	CONFIG_SYS_LIME_BASE		0xE4000000
#define	CONFIG_SYS_LIME_SIZE		0x04000000
#define	CONFIG_SYS_FPGA_BASE		0xC0000000
#define	CONFIG_SYS_FPGA_SIZE		0x10000000
#define	CONFIG_SYS_MPEG_BASE		0xe2000000
#define	CONFIG_SYS_MPEG_SIZE		0x01000000
#define CONFIG_SYS_CF_BASE		0xe1000000
#define CONFIG_SYS_CF_SIZE		0x01000000

/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
/* End of used area in DPRAM */
#define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#   define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN	(384 << 10)  /* Reserve 384 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20)    /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)    /* Initial Memory map for Linux */

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC		1
#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR			0x00

/*
 * GPIO configuration
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x1d556624

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#endif
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS		16
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1...15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */

#define CONFIG_LOOPW

/*
 * Various low-level settings
 */
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS1_START		CONFIG_SYS_SRAM_BASE
#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_SRAM_SIZE
#define CONFIG_SYS_CS3_START		CONFIG_SYS_LIME_BASE
#define CONFIG_SYS_CS3_SIZE		CONFIG_SYS_LIME_SIZE
#define	CONFIG_SYS_CS6_START		CONFIG_SYS_FPGA_BASE
#define	CONFIG_SYS_CS6_SIZE		CONFIG_SYS_FPGA_SIZE
#define	CONFIG_SYS_CS5_START		CONFIG_SYS_CF_BASE
#define	CONFIG_SYS_CS5_SIZE		CONFIG_SYS_CF_SIZE
#define	CONFIG_SYS_CS7_START		CONFIG_SYS_MPEG_BASE
#define	CONFIG_SYS_CS7_SIZE		CONFIG_SYS_MPEG_SIZE

#ifdef CONFIG_SYS_PCISPEED_66
#define CONFIG_SYS_BOOTCS_CFG		0x0006F900
#define CONFIG_SYS_CS1_CFG		0x0004FB00
#define CONFIG_SYS_CS2_CFG		0x0006F900
#else
#define CONFIG_SYS_BOOTCS_CFG		0x0002F900
#define CONFIG_SYS_CS1_CFG		0x0001FB00
#define CONFIG_SYS_CS2_CFG		0x0002F90C
#endif

/*
 * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
 * waitstates, writeswap and readswap enabled
 */
#define CONFIG_SYS_CS3_CFG		0x00FFFB0C
#define	CONFIG_SYS_CS6_CFG		0x00FFFB0C
#define	CONFIG_SYS_CS7_CFG		0x4040751C

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE		0x33330000

#define CONFIG_SYS_RESET_ADDRESS	0xff000000

/*-----------------------------------------------------------------------
 * USB stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_USB_CLOCK		0x0001BBBB
#define CONFIG_USB_CONFIG		0x00005000

/*-----------------------------------------------------------------------
 * IDE/ATA stuff Supports IDE harddisk
 *-----------------------------------------------------------------------
 */
#define CONFIG_IDE_PREINIT

#define CONFIG_SYS_IDE_MAXBUS		1 /* max. 1 IDE bus */
#define CONFIG_SYS_IDE_MAXDEVICE	2 /* max. 2 drives per IDE bus */

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA

/* Offset for data I/O */
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)

/* Offset for normal register accesses */
#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)

/* Offset for alternate registers */
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)

/* Interval between registers */
#define CONFIG_SYS_ATA_STRIDE		4

#endif /* __CONFIG_H */
Commit	Line	Data
cd12f615 WG	1	/*
	2	* (C) Copyright 2006
	3	* MicroSys GmbH
	4	*
	5	* (C) Copyright 2009
	6	* Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
	7	*
3765b3e7	8	* SPDX-License-Identifier: GPL-2.0+
cd12f615 WG	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	/*
	15	* High Level Configuration Options
	16	*/
	17
	18	#define CONFIG_MPC5200
b2a6dfe4 MY	19	#define CONFIG_MPX5200 1 /* MPX5200 board */
b2a6dfe4 MY	20	#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */
cd12f615	21	#define CONFIG_IPEK01 /* Motherboard is ipek01 */
dfcd23e3 AG	22	#define CONFIG_SYS_GENERIC_BOARD
dfcd23e3 AG	23	#define CONFIG_DISPLAY_BOARDINFO
cd12f615	24
2ae18241 WD	25	#define CONFIG_SYS_TEXT_BASE 0xfc000000
2ae18241 WD	26
cd12f615 WG	27	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
	28
	29	#define CONFIG_MISC_INIT_R
	30
cd12f615 WG	31	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	32	#ifdef CONFIG_CMD_KGDB
	33	#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	34	#endif
	35
	36	/*
	37	* Serial console configuration
	38	*/
	39	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	40	#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */
	41	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
	42
	43	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	44
	45	/*
	46	* Video configuration for LIME GDC
	47	*/
	48	#define CONFIG_VIDEO
	49	#ifdef CONFIG_VIDEO
	50	#define CONFIG_VIDEO_MB862xx
	51	#define CONFIG_VIDEO_MB862xx_ACCEL
	52	#define VIDEO_FB_16BPP_WORD_SWAP
	53	#define CONFIG_CFB_CONSOLE
	54	#define CONFIG_VIDEO_LOGO
	55	#define CONFIG_VIDEO_BMP_LOGO
	56	#define CONFIG_CONSOLE_EXTRA_INFO
	57	#define CONFIG_VGA_AS_SINGLE_DEVICE
	58	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	59	#define CONFIG_VIDEO_SW_CURSOR
	60	#define CONFIG_SPLASH_SCREEN
	61	#define CONFIG_VIDEO_BMP_GZIP
	62	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
	63	/* Lime clock frequency */
	64	#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */
	65	/* SDRAM parameter */
	66	#define CONFIG_SYS_MB862xx_MMR 0x41c767e3
	67	#endif
	68
	69	/*
	70	* PCI Mapping:
	71	* 0x40000000 - 0x4fffffff - PCI Memory
	72	* 0x50000000 - 0x50ffffff - PCI IO Space
	73	*/
	74	#define CONFIG_PCI 1
	75	#define CONFIG_PCI_PNP 1
	76	#define CONFIG_PCI_SCAN_SHOW 1
	77
	78	#define CONFIG_PCI_MEM_BUS 0x40000000
	79	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	80	#define CONFIG_PCI_MEM_SIZE 0x10000000
	81
	82	#define CONFIG_PCI_IO_BUS 0x50000000
	83	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	84	#define CONFIG_PCI_IO_SIZE 0x01000000
	85
cd12f615 WG	86	#define CONFIG_MII 1
	87	#define CONFIG_EEPRO100 1
	88	#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
	89
	90	/* Partitions */
	91	#define CONFIG_DOS_PARTITION
	92
	93	/* USB */
	94	#define CONFIG_USB_OHCI_NEW
	95	#define CONFIG_SYS_OHCI_BE_CONTROLLER
	96	#define CONFIG_USB_STORAGE
	97
	98	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	99	#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
	100	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
	101	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
	102
	103	/*
	104	* Command line configuration.
	105	*/
cd12f615 WG	106	#ifdef CONFIG_VIDEO
	107	#define CONFIG_CMD_BMP /* BMP support */
	108	#endif
	109	#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
	110	#define CONFIG_CMD_DHCP /* DHCP Support */
	111	#define CONFIG_CMD_FAT /* FAT support */
	112	#define CONFIG_CMD_I2C /* I2C serial bus support */
	113	#define CONFIG_CMD_IDE /* IDE harddisk support */
	114	#define CONFIG_CMD_IRQ /* irqinfo */
	115	#define CONFIG_CMD_MII /* MII support */
	116	#define CONFIG_CMD_PCI /* pciinfo */
	117	#define CONFIG_CMD_USB /* USB Support */
	118
	119	#define CONFIG_SYS_LOWBOOT 1
	120
	121	/*
	122	* Autobooting
	123	*/
	124	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	125
	126	#define CONFIG_PREBOOT "echo;" \
	127	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	128	"echo"
	129
	130	#undef CONFIG_BOOTARGS
	131
	132	#define CONFIG_EXTRA_ENV_SETTINGS \
	133	"netdev=eth0\0" \
	134	"consoledev=ttyPSC0\0" \
	135	"hostname=ipek01\0" \
	136	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	137	"nfsroot=${serverip}:${rootpath}\0" \
	138	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	139	"addip=setenv bootargs ${bootargs} " \
	140	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	141	":${hostname}:${netdev}:off panic=1\0" \
	142	"addtty=setenv bootargs ${bootargs} " \
	143	"console=${consoledev},${baudrate}\0" \
	144	"flash_nfs=run nfsargs addip addtty;" \
	145	"bootm ${kernel_addr} - ${fdtaddr}\0" \
	146	"flash_self=run ramargs addip addtty;" \
	147	"bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \
	148	"net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \
	149	"run nfsargs addip addtty;" \
	150	"bootm ${loadaddr} - ${fdtaddr}\0" \
	151	"rootpath=/opt/eldk/ppc_6xx\0" \
	152	"bootfile=ipek01/uImage\0" \
	153	"load=tftp 100000 ipek01/u-boot.bin\0" \
	154	"update=protect off FC000000 +60000; era FC000000 +60000; " \
	155	"cp.b 100000 FC000000 ${filesize}\0" \
	156	"upd=run load;run update\0" \
	157	"fdtaddr=800000\0" \
	158	"loadaddr=400000\0" \
	159	"fdtfile=ipek01/ipek01.dtb\0" \
	160	""
	161
	162	#define CONFIG_BOOTCOMMAND "run flash_self"
	163
	164	/*
	165	* IPB Bus clocking configuration.
	166	*/
	167	#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */
	168	/* PCI clock must be 33, because board will not boot */
	169	#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */
170
171	/*
172	* Open firmware flat tree support
173	*/
174	#define CONFIG_OF_LIBFDT 1
175	#define CONFIG_OF_BOARD_SETUP 1
176
177	#define OF_CPU "PowerPC,5200@0"
178	#define OF_SOC "soc5200@f0000000"
179	#define OF_TBCLK (bd->bi_busfreq / 4)
180
181	/*
182	* I2C configuration
183	*/
184	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
185	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
186
187	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
188	#define CONFIG_SYS_I2C_SLAVE 0x7F
189
190	/*
191	* EEPROM configuration
192	*/
193	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
194	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
195	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
196	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
197
198	/*
199	* RTC configuration
200	*/
201	#define CONFIG_RTC_PCF8563
202	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
203
204	#define CONFIG_SYS_FLASH_BASE 0xFC000000
205	#define CONFIG_SYS_FLASH_SIZE 0x01000000
206	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
207	CONFIG_SYS_MONITOR_LEN)
208
209	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
210	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
211	#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
212
213	/* use CFI flash driver */
214	#define CONFIG_FLASH_CFI_DRIVER
215	#define CONFIG_SYS_FLASH_CFI
216	#define CONFIG_SYS_FLASH_EMPTY_INFO
217	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
218
219	/*
220	* Environment settings
221	*/
222	#define CONFIG_ENV_IS_IN_FLASH 1
223	#define CONFIG_ENV_SIZE 0x10000
224	#define CONFIG_ENV_SECT_SIZE 0x20000
225	#define CONFIG_ENV_OVERWRITE 1
226	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
227	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
228
229	/*
230	* Memory map
231	*/
232	#define CONFIG_SYS_MBAR 0xf0000000
233	#define CONFIG_SYS_SDRAM_BASE 0x00000000
234	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
235	#define CONFIG_SYS_SRAM_BASE 0xF1000000
236	#define CONFIG_SYS_SRAM_SIZE 0x00200000
237	#define CONFIG_SYS_LIME_BASE 0xE4000000
238	#define CONFIG_SYS_LIME_SIZE 0x04000000
239	#define CONFIG_SYS_FPGA_BASE 0xC0000000
240	#define CONFIG_SYS_FPGA_SIZE 0x10000000
241	#define CONFIG_SYS_MPEG_BASE 0xe2000000
242	#define CONFIG_SYS_MPEG_SIZE 0x01000000
243	#define CONFIG_SYS_CF_BASE 0xe1000000
244	#define CONFIG_SYS_CF_SIZE 0x01000000
245
246	/* Use SRAM until RAM will be available */
247	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
248	/* End of used area in DPRAM */
553f0982	249	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
cd12f615	250
553f0982	251	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
25ddd1fb	252	GENERATED_GBL_DATA_SIZE)
cd12f615 WG	253	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
cd12f615 WG	254
14d0a02a	255	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
cd12f615 WG	256	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	257	# define CONFIG_SYS_RAMBOOT 1
	258	#endif
	259
	260	#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
	261	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */
	262	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	263
	264	/*
	265	* Ethernet configuration
	266	*/
	267	#define CONFIG_MPC5xxx_FEC 1
	268	#define CONFIG_MPC5xxx_FEC_MII100
	269	#define CONFIG_PHY_ADDR 0x00
	270
	271	/*
	272	* GPIO configuration
	273	*/
	274	#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624
	275
	276	/*
	277	* Miscellaneous configurable options
	278	*/
	279	#define CONFIG_SYS_LONGHELP /* undef to save memory */
cd12f615 WG	280	#ifdef CONFIG_CMD_KGDB
	281	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	282	#else
	283	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	284	#endif
	285	/* Print Buffer Size */
	286	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	287	sizeof(CONFIG_SYS_PROMPT) + 16)
	288	/* max number of command args */
	289	#define CONFIG_SYS_MAXARGS 16
	290	/* Boot Argument Buffer Size */
	291	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	292
cd12f615 WG	293	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	294	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */
	295
	296	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
	297
cd12f615 WG	298	#define CONFIG_LOOPW
	299
	300	/*
	301	* Various low-level settings
	302	*/
cd12f615 WG	303	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
cd12f615 WG	304	#define CONFIG_SYS_HID0_FINAL HID0_ICE
cd12f615 WG	305
	306	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	307	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	308	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	309	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
	310	#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE
	311	#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE
	312	#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE
	313	#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE
	314	#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE
	315	#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE
	316	#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE
	317	#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE
	318	#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE
	319	#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE
	320
	321	#ifdef CONFIG_SYS_PCISPEED_66
	322	#define CONFIG_SYS_BOOTCS_CFG 0x0006F900
	323	#define CONFIG_SYS_CS1_CFG 0x0004FB00
	324	#define CONFIG_SYS_CS2_CFG 0x0006F900
	325	#else
	326	#define CONFIG_SYS_BOOTCS_CFG 0x0002F900
	327	#define CONFIG_SYS_CS1_CFG 0x0001FB00
	328	#define CONFIG_SYS_CS2_CFG 0x0002F90C
	329	#endif
	330
	331	/*
	332	* Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
	333	* waitstates, writeswap and readswap enabled
	334	*/
	335	#define CONFIG_SYS_CS3_CFG 0x00FFFB0C
	336	#define CONFIG_SYS_CS6_CFG 0x00FFFB0C
	337	#define CONFIG_SYS_CS7_CFG 0x4040751C
	338
	339	#define CONFIG_SYS_CS_BURST 0x00000000
	340	#define CONFIG_SYS_CS_DEADCYCLE 0x33330000
	341
	342	#define CONFIG_SYS_RESET_ADDRESS 0xff000000
	343
	344	/*-----------------------------------------------------------------------
	345	* USB stuff
	346	*-----------------------------------------------------------------------
	347	*/
	348	#define CONFIG_USB_CLOCK 0x0001BBBB
	349	#define CONFIG_USB_CONFIG 0x00005000
	350
	351	/*-----------------------------------------------------------------------
	352	* IDE/ATA stuff Supports IDE harddisk
	353	*-----------------------------------------------------------------------
	354	*/
	355	#define CONFIG_IDE_PREINIT
	356
	357	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
	358	#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
	359
	360	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	361
	362	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
	363
	364	/* Offset for data I/O */
	365	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
	366
	367	/* Offset for normal register accesses */
	368	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
369
370	/* Offset for alternate registers */
371	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
372
373	/* Interval between registers */
374	#define CONFIG_SYS_ATA_STRIDE 4
375
376	#endif /* __CONFIG_H */