[people/ms/u-boot.git] / include / configs / mx53ard.h

/*
 * Copyright (C) 2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the MX53ARD Freescale board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MX53

#define CONFIG_MACH_TYPE	MACH_TYPE_MX53_ARD

#include <asm/arch/imx-regs.h>

#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_SYS_FSL_CLK

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
#define CONFIG_NAND_MXC
#define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_CMD_NAND

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART1_BASE

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	2

#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

/* Eth Configs */
#define CONFIG_HAS_ETH1
#define CONFIG_MII

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */

#define CONFIG_ETHPRIME		"smc911x"

/*Support LAN9217*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE CS1_BASE_ADDR

#define CONFIG_LOADADDR		0x72000000	/* loadaddr env var */
#define CONFIG_SYS_TEXT_BASE    0x77800000

#define CONFIG_DEFAULT_FDT_FILE		"imx53-ard.dtb"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x78000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loaduimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

#define CONFIG_ARP_TIMEOUT	200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START       0x70000000
#define CONFIG_SYS_MEMTEST_END         0x70010000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	2
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
#define PHYS_SDRAM_2		CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
#define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)

#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
#define CONFIG_ENV_SIZE        (8 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV	0

#define MX53ARD_CS1GCR1		(CSEN | DSZ(2))
#define MX53ARD_CS1RCR1		(RCSN(2) | OEN (1) | RWSC(22))
#define MX53ARD_CS1RCR2		RBEN(2)
#define MX53ARD_CS1WCR1		(WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))

#endif				/* __CONFIG_H */
Commit	Line	Data
47c3e074 FE	1	/*
	2	* Copyright (C) 2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the MX53ARD Freescale board.
	5	*
3765b3e7	6	* SPDX-License-Identifier: GPL-2.0+
47c3e074 FE	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#define CONFIG_MX53
	13
7c2eabab FE	14	#define CONFIG_MACH_TYPE MACH_TYPE_MX53_ARD
7c2eabab FE	15
47c3e074 FE	16	#include <asm/arch/imx-regs.h>
	17
	18	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
47c3e074 FE	19	#define CONFIG_SETUP_MEMORY_TAGS
47c3e074 FE	20	#define CONFIG_INITRD_TAG
fd622f23	21	#define CONFIG_REVISION_TAG
47c3e074	22
18fb0e3c	23	#define CONFIG_SYS_FSL_CLK
4677b1b6	24
47c3e074 FE	25	/* Size of malloc() pool */
	26	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	27
	28	#define CONFIG_BOARD_EARLY_INIT_F
	29	#define CONFIG_MXC_GPIO
	30
68fbc0e6 BT	31	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	32	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
	33	#define CONFIG_NAND_MXC
	34	#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
	35	#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
	36	#define CONFIG_SYS_NAND_LARGEPAGE
	37	#define CONFIG_MXC_NAND_HWECC
	38	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	39	#define CONFIG_CMD_NAND
	40
47c3e074	41	#define CONFIG_MXC_UART
40f6fffe	42	#define CONFIG_MXC_UART_BASE UART1_BASE
47c3e074 FE	43
47c3e074 FE	44	/* I2C Configs */
b089d039	45	#define CONFIG_SYS_I2C
b089d039	46	#define CONFIG_SYS_I2C_MXC
03544c66 AA	47	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	48	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	49	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
47c3e074 FE	50
	51	/* MMC Configs */
	52	#define CONFIG_FSL_ESDHC
	53	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	54	#define CONFIG_SYS_FSL_ESDHC_NUM 2
	55
	56	#define CONFIG_MMC
47c3e074	57	#define CONFIG_GENERIC_MMC
47c3e074 FE	58	#define CONFIG_DOS_PARTITION
	59
	60	/* Eth Configs */
	61	#define CONFIG_HAS_ETH1
47c3e074	62	#define CONFIG_MII
47c3e074	63
47c3e074 FE	64	/* allow to overwrite serial and ethaddr */
	65	#define CONFIG_ENV_OVERWRITE
	66	#define CONFIG_CONS_INDEX 1
	67	#define CONFIG_BAUDRATE 115200
47c3e074 FE	68
47c3e074 FE	69	/* Command definition */
47c3e074	70
28b119e9	71	#define CONFIG_ETHPRIME "smc911x"
47c3e074 FE	72
	73	/Support LAN9217/
	74	#define CONFIG_SMC911X
	75	#define CONFIG_SMC911X_16_BIT
	76	#define CONFIG_SMC911X_BASE CS1_BASE_ADDR
	77
547e31d2	78	#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
47c3e074 FE	79	#define CONFIG_SYS_TEXT_BASE 0x77800000
47c3e074 FE	80
547e31d2 OS	81	#define CONFIG_DEFAULT_FDT_FILE "imx53-ard.dtb"
547e31d2 OS	82
47c3e074 FE	83	#define CONFIG_EXTRA_ENV_SETTINGS \
47c3e074 FE	84	"script=boot.scr\0" \
3c525ecf	85	"uimage=zImage\0" \
547e31d2 OS	86	"console=ttymxc0\0" \
	87	"fdt_high=0xffffffff\0" \
	88	"initrd_high=0xffffffff\0" \
	89	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
3c525ecf	90	"fdt_addr=0x78000000\0" \
547e31d2 OS	91	"boot_fdt=try\0" \
	92	"ip_dyn=yes\0" \
	93	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
a3f170cd OS	94	"mmcpart=1\0" \
a3f170cd OS	95	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
547e31d2 OS	96	"update_sd_firmware_filename=u-boot.imx\0" \
	97	"update_sd_firmware=" \
	98	"if test ${ip_dyn} = yes; then " \
	99	"setenv get_cmd dhcp; " \
	100	"else " \
	101	"setenv get_cmd tftp; " \
	102	"fi; " \
	103	"if mmc dev ${mmcdev}; then " \
	104	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	105	"setexpr fw_sz ${filesize} / 0x200; " \
	106	"setexpr fw_sz ${fw_sz} + 1; " \
	107	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	108	"fi; " \
	109	"fi\0" \
	110	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	111	"root=${mmcroot}\0" \
47c3e074 FE	112	"loadbootscript=" \
	113	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	114	"bootscript=echo Running bootscript from mmc ...; " \
	115	"source\0" \
	116	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
547e31d2	117	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
47c3e074 FE	118	"mmcboot=echo Booting from mmc ...; " \
47c3e074 FE	119	"run mmcargs; " \
547e31d2 OS	120	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
547e31d2 OS	121	"if run loadfdt; then " \
3c525ecf	122	"bootz ${loadaddr} - ${fdt_addr}; " \
547e31d2 OS	123	"else " \
547e31d2 OS	124	"if test ${boot_fdt} = try; then " \
3c525ecf	125	"bootz; " \
547e31d2 OS	126	"else " \
	127	"echo WARN: Cannot load the DT; " \
	128	"fi; " \
	129	"fi; " \
	130	"else " \
3c525ecf	131	"bootz; " \
547e31d2 OS	132	"fi;\0" \
547e31d2 OS	133	"netargs=setenv bootargs console=${console},${baudrate} " \
47c3e074	134	"root=/dev/nfs " \
547e31d2 OS	135	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
547e31d2 OS	136	"netboot=echo Booting from net ...; " \
47c3e074	137	"run netargs; " \
547e31d2 OS	138	"if test ${ip_dyn} = yes; then " \
547e31d2 OS	139	"setenv get_cmd dhcp; " \
47c3e074	140	"else " \
547e31d2	141	"setenv get_cmd tftp; " \
47c3e074	142	"fi; " \
547e31d2 OS	143	"${get_cmd} ${uimage}; " \
	144	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	145	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
3c525ecf	146	"bootz ${loadaddr} - ${fdt_addr}; " \
547e31d2 OS	147	"else " \
547e31d2 OS	148	"if test ${boot_fdt} = try; then " \
3c525ecf	149	"bootz; " \
547e31d2 OS	150	"else " \
	151	"echo WARN: Cannot load the DT; " \
	152	"fi; " \
	153	"fi; " \
	154	"else " \
3c525ecf	155	"bootz; " \
547e31d2 OS	156	"fi;\0"
	157
	158	#define CONFIG_BOOTCOMMAND \
	159	"mmc dev ${mmcdev}; if mmc rescan; then " \
	160	"if run loadbootscript; then " \
	161	"run bootscript; " \
	162	"else " \
	163	"if run loaduimage; then " \
	164	"run mmcboot; " \
	165	"else run netboot; " \
	166	"fi; " \
	167	"fi; " \
	168	"else run netboot; fi"
	169
47c3e074 FE	170	#define CONFIG_ARP_TIMEOUT 200UL
	171
	172	/* Miscellaneous configurable options */
	173	#define CONFIG_SYS_LONGHELP /* undef to save memory */
47c3e074 FE	174	#define CONFIG_AUTO_COMPLETE
	175	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	176
	177	/* Print Buffer Size */
	178	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	179	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	180	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	181
	182	#define CONFIG_SYS_MEMTEST_START 0x70000000
	183	#define CONFIG_SYS_MEMTEST_END 0x70010000
	184
	185	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	186
47c3e074 FE	187	#define CONFIG_CMDLINE_EDITING
47c3e074 FE	188
47c3e074 FE	189	/* Physical Memory Map */
	190	#define CONFIG_NR_DRAM_BANKS 2
	191	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	192	#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
	193	#define PHYS_SDRAM_2 CSD1_BASE_ADDR
	194	#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024)
	195	#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
	196
	197	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	198	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	199	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
	200
	201	#define CONFIG_SYS_INIT_SP_OFFSET \
	202	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	203	#define CONFIG_SYS_INIT_SP_ADDR \
	204	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	205
	206	/* FLASH and environment organization */
	207	#define CONFIG_SYS_NO_FLASH
	208
	209	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	210	#define CONFIG_ENV_SIZE (8 * 1024)
	211	#define CONFIG_ENV_IS_IN_MMC
	212	#define CONFIG_SYS_MMC_ENV_DEV 0
	213
47c3e074 FE	214	#define MX53ARD_CS1GCR1 (CSEN \| DSZ(2))
	215	#define MX53ARD_CS1RCR1 (RCSN(2) \| OEN (1) \| RWSC(22))
	216	#define MX53ARD_CS1RCR2 RBEN(2)
	217	#define MX53ARD_CS1WCR1 (WCSN(2) \| WEN(2) \| WBEN(2) \| WWSC(22))
	218
	219	#endif /* __CONFIG_H */