[thirdparty/u-boot.git] / include / configs / novena.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Configuration settings for the Novena U-Boot.
 *
 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* System configurations */
#define CONFIG_KEYBOARD

#include "mx6_common.h"

/* U-Boot Commands */

/* U-Boot general configurations */

/* U-Boot environment */
/*
 * Environment is on MMC, starting at offset 512KiB from start of the card.
 * Please place first partition at offset 1MiB from the start of the card
 * as recommended by GNU/fdisk. See below for details:
 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
 */

/* Booting Linux */
#define CONFIG_BOOTFILE			"fitImage"
#define CONFIG_HOSTNAME			"novena"

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

/* SPL */
#include "imx6_spl.h"			/* common IMX6 SPL configuration */

/* Ethernet Configuration */
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_ETH
#endif

/* I2C */
#define CONFIG_SYS_I2C_LEGACY
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_SPD_BUS_NUM		0

/* I2C EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_BUS	2
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* PCI express */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
#endif

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* SATA Configs */
#define CONFIG_LBA48

/* UART */
#define CONFIG_MXC_UART_BASE		UART2_BASE

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
/* Gadget part */
#define CONFIG_USBD_HS
#endif

/* Video output */
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* Extra U-Boot environment. */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"consdev=ttymxc1\0"						\
	"baudrate=115200\0"						\
	"bootdev=/dev/mmcblk0p1\0"					\
	"rootdev=/dev/mmcblk0p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
	"ramdisk_addr_r=0x28000000\0"		   			\
	"fdt_addr_r=0x18000000\0"					\
	"fdtfile=imx6q-novena.dtb\0"					\
	"stdout=serial,vidconsole\0"					\
	"stderr=serial,vidconsole\0"					\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"update_sd_spl_filename=SPL\0"					\
	"update_sd_uboot_filename=u-boot.img\0"				\
	"update_sd_firmware="	/* Update the SD firmware partition */	\
		"if mmc rescan ; then "					\
		"if dhcp ${update_sd_spl_filename} ; then "		\
		"mmc write ${loadaddr} 2 0x200 ; "			\
		"fi ; "							\
		"if dhcp ${update_sd_uboot_filename} ; then "		\
		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
		"fi ; "							\
		"fi\0"							\
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#else
#define CONFIG_EXTRA_ENV_SETTINGS
#endif /* CONFIG_SPL_BUILD */

#endif				/* __CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
f91c09ac	2	/*
a187559e	3	* Configuration settings for the Novena U-Boot.
f91c09ac MV	4	*
f91c09ac MV	5	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
f91c09ac MV	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	/* System configurations */
f91c09ac	12	#define CONFIG_KEYBOARD
f91c09ac	13
60667a53	14	#include "mx6_common.h"
f91c09ac MV	15
f91c09ac MV	16	/* U-Boot Commands */
f91c09ac MV	17
f91c09ac MV	18	/* U-Boot general configurations */
f91c09ac MV	19
f91c09ac MV	20	/* U-Boot environment */
f91c09ac MV	21	/*
	22	* Environment is on MMC, starting at offset 512KiB from start of the card.
	23	* Please place first partition at offset 1MiB from the start of the card
	24	* as recommended by GNU/fdisk. See below for details:
	25	* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
	26	*/
f91c09ac MV	27
f91c09ac MV	28	/* Booting Linux */
f91c09ac	29	#define CONFIG_BOOTFILE "fitImage"
5bc0543d	30	#define CONFIG_HOSTNAME "novena"
f91c09ac MV	31
f91c09ac MV	32	/* Physical Memory Map */
f91c09ac	33	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
f91c09ac MV	34
	35	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	36	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	37	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	38
	39	#define CONFIG_SYS_INIT_SP_OFFSET \
	40	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	41	#define CONFIG_SYS_INIT_SP_ADDR \
	42	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	43
f91c09ac MV	44	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
	45
	46	/* SPL */
f91c09ac MV	47	#include "imx6_spl.h" /* common IMX6 SPL configuration */
f91c09ac MV	48
f91c09ac	49	/* Ethernet Configuration */
b91f28de MV	50	#ifdef CONFIG_SPL_BUILD
b91f28de MV	51	#undef CONFIG_DM_ETH
f91c09ac MV	52	#endif
	53
	54	/* I2C */
69d9eda4	55	#define CONFIG_SYS_I2C_LEGACY
f91c09ac	56	#define CONFIG_SYS_I2C_MXC
03544c66 AA	57	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	58	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	59	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
f91c09ac	60	#define CONFIG_I2C_MULTI_BUS
f91c09ac	61	#define CONFIG_SYS_I2C_SPEED 100000
735b1a2e	62	#define CONFIG_SYS_SPD_BUS_NUM 0
f91c09ac MV	63
	64	/* I2C EEPROM */
	65	#ifdef CONFIG_CMD_EEPROM
	66	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
735b1a2e	67	#define CONFIG_SYS_I2C_EEPROM_BUS 2
f91c09ac MV	68	#endif
	69
	70	/* MMC Configs */
f91c09ac MV	71	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
f91c09ac MV	72	#define CONFIG_SYS_FSL_USDHC_NUM 2
f91c09ac	73
f91c09ac MV	74	/* PCI express */
f91c09ac MV	75	#ifdef CONFIG_CMD_PCI
f91c09ac MV	76	#define CONFIG_PCI_SCAN_SHOW
	77	#define CONFIG_PCIE_IMX
	78	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
	79	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
	80	#endif
	81
	82	/* PMIC */
	83	#define CONFIG_POWER
	84	#define CONFIG_POWER_I2C
	85	#define CONFIG_POWER_PFUZE100
	86	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	87
	88	/* SATA Configs */
f91c09ac	89	#define CONFIG_LBA48
f91c09ac MV	90
f91c09ac MV	91	/* UART */
f91c09ac	92	#define CONFIG_MXC_UART_BASE UART2_BASE
f91c09ac MV	93
	94	/* USB Configs */
	95	#ifdef CONFIG_CMD_USB
f91c09ac MV	96	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	97	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	98	#define CONFIG_MXC_USB_FLAGS 0
	99	/* Gadget part */
f91c09ac	100	#define CONFIG_USBD_HS
f91c09ac MV	101	#endif
	102
	103	/* Video output */
f91c09ac	104	#define CONFIG_VIDEO_LOGO
f91c09ac MV	105	#define CONFIG_IMX_HDMI
f91c09ac MV	106	#define CONFIG_IMX_VIDEO_SKIP
f91c09ac MV	107
f91c09ac MV	108	/* Extra U-Boot environment. */
1c2d4a50	109	#ifndef CONFIG_SPL_BUILD
f91c09ac MV	110	#define CONFIG_EXTRA_ENV_SETTINGS \
	111	"fdt_high=0xffffffff\0" \
	112	"initrd_high=0xffffffff\0" \
	113	"consdev=ttymxc1\0" \
	114	"baudrate=115200\0" \
	115	"bootdev=/dev/mmcblk0p1\0" \
	116	"rootdev=/dev/mmcblk0p2\0" \
	117	"netdev=eth0\0" \
233509a5	118	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
1c2d4a50 VC	119	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	120	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
	121	"ramdisk_addr_r=0x28000000\0" \
	122	"fdt_addr_r=0x18000000\0" \
	123	"fdtfile=imx6q-novena.dtb\0" \
2f1c06c7 MV	124	"stdout=serial,vidconsole\0" \
2f1c06c7 MV	125	"stderr=serial,vidconsole\0" \
f91c09ac MV	126	"addcons=" \
	127	"setenv bootargs ${bootargs} " \
	128	"console=${consdev},${baudrate}\0" \
	129	"addip=" \
	130	"setenv bootargs ${bootargs} " \
	131	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	132	"${netmask}:${hostname}:${netdev}:off\0" \
	133	"addmisc=" \
	134	"setenv bootargs ${bootargs} ${miscargs}\0" \
	135	"addargs=run addcons addmisc\0" \
	136	"mmcload=" \
	137	"mmc rescan ; " \
	138	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	139	"netload=" \
	140	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	141	"miscargs=nohlt panic=1\0" \
	142	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	143	"nfsargs=" \
	144	"setenv bootargs root=/dev/nfs rw " \
	145	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	146	"mmc_mmc=" \
	147	"run mmcload mmcargs addargs ; " \
	148	"bootm ${kernel_addr_r}\0" \
	149	"mmc_nfs=" \
	150	"run mmcload nfsargs addip addargs ; " \
	151	"bootm ${kernel_addr_r}\0" \
	152	"net_mmc=" \
	153	"run netload mmcargs addargs ; " \
	154	"bootm ${kernel_addr_r}\0" \
	155	"net_nfs=" \
	156	"run netload nfsargs addip addargs ; " \
	157	"bootm ${kernel_addr_r}\0" \
	158	"update_sd_spl_filename=SPL\0" \
	159	"update_sd_uboot_filename=u-boot.img\0" \
	160	"update_sd_firmware=" /* Update the SD firmware partition */ \
	161	"if mmc rescan ; then " \
	162	"if dhcp ${update_sd_spl_filename} ; then " \
	163	"mmc write ${loadaddr} 2 0x200 ; " \
	164	"fi ; " \
	165	"if dhcp ${update_sd_uboot_filename} ; then " \
	166	"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
	167	"fi ; " \
	168	"fi\0" \
1c2d4a50 VC	169	BOOTENV
	170
	171	#define BOOT_TARGET_DEVICES(func) \
	172	func(MMC, mmc, 0) \
	173	func(USB, usb, 0) \
	174	func(SATA, sata, 0) \
	175	func(PXE, pxe, na) \
	176	func(DHCP, dhcp, na)
	177
	178	#include <config_distro_bootcmd.h>
	179
	180	#else
	181	#define CONFIG_EXTRA_ENV_SETTINGS
	182	#endif /* CONFIG_SPL_BUILD */
f91c09ac MV	183
f91c09ac MV	184	#endif /* __CONFIG_H */