]>
Commit | Line | Data |
---|---|---|
6310eb9d WD |
1 | /* |
2 | * (C) Copyright 2002 | |
3 | * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net | |
4 | * | |
5 | * (C) Copyright 2002 | |
6 | * Sysgo Real-Time Solutions, GmbH <www.elinos.com> | |
7 | * Marius Groeger <mgroeger@sysgo.de> | |
8 | * | |
9 | * Configuration settings for the PLEB 2 board. | |
10 | * | |
11 | * See file CREDITS for list of people who contributed to this | |
12 | * project. | |
13 | * | |
14 | * This program is free software; you can redistribute it and/or | |
15 | * modify it under the terms of the GNU General Public License as | |
16 | * published by the Free Software Foundation; either version 2 of | |
17 | * the License, or (at your option) any later version. | |
18 | * | |
19 | * This program is distributed in the hope that it will be useful, | |
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
22 | * GNU General Public License for more details. | |
23 | * | |
24 | * You should have received a copy of the GNU General Public License | |
25 | * along with this program; if not, write to the Free Software | |
26 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
27 | * MA 02111-1307 USA | |
28 | */ | |
29 | ||
30 | #ifndef __CONFIG_H | |
31 | #define __CONFIG_H | |
32 | ||
6310eb9d WD |
33 | /* |
34 | * High Level Configuration Options | |
35 | * (easy to change) | |
36 | */ | |
37 | #define CONFIG_PXA250 1 /* This is an PXA255 CPU */ | |
38 | #define CONFIG_PLEB2 1 /* on an PLEB2 Board */ | |
39 | #undef CONFIG_LCD | |
40 | #undef CONFIG_MMC | |
41 | #define BOARD_LATE_INIT 1 | |
42 | ||
43 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ | |
44 | ||
45 | /* | |
46 | * Size of malloc() pool | |
47 | */ | |
6d0f6bcf JCPV |
48 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
49 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ | |
6310eb9d WD |
50 | |
51 | /* | |
52 | * Hardware drivers | |
53 | */ | |
54 | ||
55 | /* None - PLEB 2 doesn't have any of this. | |
56 | #define CONFIG_DRIVER_LAN91C96 | |
57 | #define CONFIG_LAN91C96_BASE 0x0C000000 */ | |
58 | ||
59 | /* | |
60 | * select serial console configuration | |
61 | */ | |
62 | #define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */ | |
63 | ||
64 | /* allow to overwrite serial and ethaddr */ | |
65 | #define CONFIG_ENV_OVERWRITE | |
66 | ||
67 | #define CONFIG_BAUDRATE 115200 | |
68 | ||
6310eb9d | 69 | |
079a136c JL |
70 | /* |
71 | * BOOTP options | |
72 | */ | |
73 | #define CONFIG_BOOTP_BOOTFILESIZE | |
74 | #define CONFIG_BOOTP_BOOTPATH | |
75 | #define CONFIG_BOOTP_GATEWAY | |
76 | #define CONFIG_BOOTP_HOSTNAME | |
77 | ||
78 | ||
26a34560 JL |
79 | /* |
80 | * Command line configuration. | |
81 | */ | |
82 | #include <config_cmd_default.h> | |
83 | ||
84 | #undef CONFIG_CMD_NET | |
85 | ||
6310eb9d WD |
86 | |
87 | #define CONFIG_BOOTDELAY 3 | |
88 | #define CONFIG_ETHADDR 08:00:3e:26:0a:5b | |
89 | #define CONFIG_NETMASK 255.255.0.0 | |
90 | #define CONFIG_IPADDR 192.168.0.21 | |
91 | #define CONFIG_SERVERIP 192.168.0.250 | |
92 | #define CONFIG_BOOTCOMMAND "bootm 40000" | |
93 | #define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200" | |
94 | ||
95 | #define CONFIG_CMDLINE_TAG | |
96 | #define CONFIG_INITRD_TAG | |
97 | #define CONFIG_SETUP_MEMORY_TAGS | |
98 | ||
26a34560 | 99 | #if defined(CONFIG_CMD_KGDB) |
6310eb9d WD |
100 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
101 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
102 | #endif | |
103 | ||
104 | /* | |
105 | * Miscellaneous configurable options | |
106 | */ | |
6d0f6bcf JCPV |
107 | #define CONFIG_SYS_HUSH_PARSER 1 |
108 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
6310eb9d | 109 | |
6d0f6bcf JCPV |
110 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
111 | #ifdef CONFIG_SYS_HUSH_PARSER | |
112 | #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ | |
6310eb9d | 113 | #else |
6d0f6bcf | 114 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
6310eb9d | 115 | #endif |
6d0f6bcf JCPV |
116 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
117 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ | |
118 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
119 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
120 | #define CONFIG_SYS_DEVICE_NULLDEV 1 | |
6310eb9d | 121 | |
6d0f6bcf JCPV |
122 | #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
123 | #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ | |
6310eb9d | 124 | |
6d0f6bcf | 125 | #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
6310eb9d | 126 | |
6d0f6bcf | 127 | #define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ |
6310eb9d | 128 | |
6d0f6bcf JCPV |
129 | #define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |
130 | #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ | |
6310eb9d WD |
131 | |
132 | /* valid baudrates */ | |
6d0f6bcf | 133 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
6310eb9d WD |
134 | |
135 | /* | |
136 | * Stack sizes | |
137 | * | |
138 | * The stack sizes are set up in start.S using the settings below | |
139 | */ | |
140 | #define CONFIG_STACKSIZE (128*1024) /* regular stack */ | |
141 | #ifdef CONFIG_USE_IRQ | |
142 | #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ | |
143 | #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ | |
144 | #endif | |
145 | ||
146 | /* | |
147 | * Physical Memory Map | |
148 | */ | |
149 | #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ | |
150 | #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ | |
151 | #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ | |
152 | #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ | |
153 | #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ | |
154 | #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ | |
155 | #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ | |
156 | #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ | |
157 | #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ | |
158 | ||
159 | #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ | |
160 | #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ | |
161 | #define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */ | |
162 | ||
163 | /* Not entirely sure about this - DS/CHC */ | |
164 | #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ | |
165 | #define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ | |
166 | ||
6d0f6bcf JCPV |
167 | #define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1 |
168 | #define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE | |
6310eb9d | 169 | |
6d0f6bcf JCPV |
170 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
171 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE | |
6310eb9d WD |
172 | |
173 | /* | |
174 | * GPIO settings | |
175 | */ | |
6d0f6bcf JCPV |
176 | #define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */ |
177 | #define CONFIG_SYS_GPSR1_VAL 0x00000080 | |
178 | #define CONFIG_SYS_GPSR2_VAL 0x00000000 | |
6310eb9d | 179 | |
6d0f6bcf JCPV |
180 | #define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */ |
181 | #define CONFIG_SYS_GPCR1_VAL 0x00000000 | |
182 | #define CONFIG_SYS_GPCR2_VAL 0x00000000 | |
6310eb9d | 183 | |
6d0f6bcf JCPV |
184 | #define CONFIG_SYS_GPDR0_VAL 0x00000000 |
185 | #define CONFIG_SYS_GPDR1_VAL 0x000007C3 | |
186 | #define CONFIG_SYS_GPDR2_VAL 0x00000000 | |
6310eb9d WD |
187 | |
188 | /* Edge detect registers (these are set by the kernel) */ | |
6d0f6bcf JCPV |
189 | #define CONFIG_SYS_GRER0_VAL 0x00000000 |
190 | #define CONFIG_SYS_GRER1_VAL 0x00000000 | |
191 | #define CONFIG_SYS_GRER2_VAL 0x00000000 | |
192 | #define CONFIG_SYS_GFER0_VAL 0x00000000 | |
193 | #define CONFIG_SYS_GFER1_VAL 0x00000000 | |
194 | #define CONFIG_SYS_GFER2_VAL 0x00000000 | |
195 | ||
196 | #define CONFIG_SYS_GAFR0_L_VAL 0x00000000 | |
197 | #define CONFIG_SYS_GAFR0_U_VAL 0x00000000 | |
198 | #define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */ | |
199 | #define CONFIG_SYS_GAFR1_U_VAL 0x00000000 | |
200 | #define CONFIG_SYS_GAFR2_L_VAL 0x00000000 | |
201 | #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 | |
202 | ||
203 | #define CONFIG_SYS_PSSR_VAL 0x20 | |
204 | #define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ | |
205 | #define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ | |
206 | #define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ | |
6310eb9d WD |
207 | |
208 | /* | |
209 | * Memory settings | |
210 | */ | |
6d0f6bcf JCPV |
211 | #define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */ |
212 | #define CONFIG_SYS_MSC1_VAL 0x00000000 | |
213 | #define CONFIG_SYS_MSC2_VAL 0x00000000 | |
6310eb9d | 214 | |
6d0f6bcf | 215 | #define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. |
6310eb9d WD |
216 | tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ |
217 | ||
6d0f6bcf | 218 | #define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */ |
400558b5 | 219 | /* bits set in lowlevel_init.S */ |
6d0f6bcf | 220 | #define CONFIG_SYS_MDMRS_VAL 0x00000000 |
6310eb9d WD |
221 | |
222 | /* | |
223 | * PCMCIA and CF Interfaces | |
224 | */ | |
6d0f6bcf | 225 | #define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock. |
6310eb9d | 226 | Needs calculating. (DS/CHC) */ |
6d0f6bcf JCPV |
227 | #define CONFIG_SYS_MCMEM0_VAL 0x00010504 |
228 | #define CONFIG_SYS_MCMEM1_VAL 0x00010504 | |
229 | #define CONFIG_SYS_MCATT0_VAL 0x00010504 | |
230 | #define CONFIG_SYS_MCATT1_VAL 0x00010504 | |
231 | #define CONFIG_SYS_MCIO0_VAL 0x00004715 | |
232 | #define CONFIG_SYS_MCIO1_VAL 0x00004715 | |
6310eb9d WD |
233 | |
234 | /* | |
235 | * FLASH and environment organization | |
236 | */ | |
6d0f6bcf JCPV |
237 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
238 | #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ | |
6310eb9d WD |
239 | |
240 | /* timeout values are in ticks */ | |
241 | /* FIXME */ | |
6d0f6bcf JCPV |
242 | #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
243 | #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ | |
6310eb9d WD |
244 | |
245 | /* Flash protection */ | |
6d0f6bcf | 246 | #define CONFIG_SYS_FLASH_PROTECTION 1 |
6310eb9d WD |
247 | |
248 | /* FIXME */ | |
5a1aceb0 | 249 | #define CONFIG_ENV_IS_IN_FLASH 1 |
0e8d1586 JCPV |
250 | #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */ |
251 | #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */ | |
252 | #define CONFIG_ENV_SECT_SIZE 0x20000 | |
6310eb9d WD |
253 | |
254 | /* Option added to get around byte ordering issues in the flash driver */ | |
6d0f6bcf | 255 | #define CONFIG_SYS_LITTLE_ENDIAN 1 |
6310eb9d WD |
256 | |
257 | #endif /* __CONFIG_H */ |