include/configs/pleb2.h

   1 /*
   2  * (C) Copyright 2002
   3  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
   4  *
   5  * (C) Copyright 2002
   6  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   7  * Marius Groeger <mgroeger@sysgo.de>
   8  *
   9  * Configuration settings for the PLEB 2 board.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37 #define CONFIG_PXA250           1       /* This is an PXA255 CPU    */
  38 #define CONFIG_PLEB2            1       /* on an PLEB2 Board        */
  39 #undef CONFIG_LCD
  40 #undef CONFIG_MMC
  41 #define BOARD_LATE_INIT         1
  42
  43 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
  44
  45 /*
  46  * Size of malloc() pool
  47  */
  48 #define CONFIG_SYS_MALLOC_LEN       (CONFIG_ENV_SIZE + 128*1024)
  49 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
  50
  51 /*
  52  * Hardware drivers
  53  */
  54
  55 /* None - PLEB 2 doesn't have any of this.
  56    #define CONFIG_DRIVER_LAN91C96
  57    #define CONFIG_LAN91C96_BASE 0x0C000000 */
  58
  59 /*
  60  * select serial console configuration
  61  */
  62 #define CONFIG_FFUART          1       /* we use FFUART on PLEB 2 */
  63
  64 /* allow to overwrite serial and ethaddr */
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #define CONFIG_BAUDRATE         115200
  68
  69
  70 /*
  71  * BOOTP options
  72  */
  73 #define CONFIG_BOOTP_BOOTFILESIZE
  74 #define CONFIG_BOOTP_BOOTPATH
  75 #define CONFIG_BOOTP_GATEWAY
  76 #define CONFIG_BOOTP_HOSTNAME
  77
  78
  79 /*
  80  * Command line configuration.
  81  */
  82 #include <config_cmd_default.h>
  83
  84 #undef CONFIG_CMD_NET
  85
  86
  87 #define CONFIG_BOOTDELAY        3
  88 #define CONFIG_ETHADDR          08:00:3e:26:0a:5b
  89 #define CONFIG_NETMASK          255.255.0.0
  90 #define CONFIG_IPADDR           192.168.0.21
  91 #define CONFIG_SERVERIP         192.168.0.250
  92 #define CONFIG_BOOTCOMMAND      "bootm 40000"
  93 #define CONFIG_BOOTARGS         "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200"
  94
  95 #define CONFIG_CMDLINE_TAG
  96 #define CONFIG_INITRD_TAG
  97 #define CONFIG_SETUP_MEMORY_TAGS
  98
  99 #if defined(CONFIG_CMD_KGDB)
 100 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
 101 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
 102 #endif
 103
 104 /*
 105  * Miscellaneous configurable options
 106  */
 107 #define CONFIG_SYS_HUSH_PARSER          1
 108 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 109
 110 #define CONFIG_SYS_LONGHELP                             /* undef to save memory         */
 111 #ifdef CONFIG_SYS_HUSH_PARSER
 112 #define CONFIG_SYS_PROMPT               "$ "            /* Monitor Command Prompt */
 113 #else
 114 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt */
 115 #endif
 116 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 117 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 118 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 119 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 120 #define CONFIG_SYS_DEVICE_NULLDEV       1
 121
 122 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on     */
 123 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM   */
 124
 125 #undef  CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
 126
 127 #define CONFIG_SYS_LOAD_ADDR            0xa2000000      /* default load address */
 128
 129 #define CONFIG_SYS_HZ                   3686400         /* incrementer freq: 3.6864 MHz */
 130 #define CONFIG_SYS_CPUSPEED             0x141           /* set core clock to 200/200/100 MHz */
 131
 132                                                 /* valid baudrates */
 133 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 134
 135 /*
 136  * Stack sizes
 137  *
 138  * The stack sizes are set up in start.S using the settings below
 139  */
 140 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 141 #ifdef CONFIG_USE_IRQ
 142 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 143 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 144 #endif
 145
 146 /*
 147  * Physical Memory Map
 148  */
 149 #define CONFIG_NR_DRAM_BANKS    4          /* we have 2 banks of DRAM */
 150 #define PHYS_SDRAM_1            0xa0000000 /* SDRAM Bank #1 */
 151 #define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
 152 #define PHYS_SDRAM_2            0xa4000000 /* SDRAM Bank #2 */
 153 #define PHYS_SDRAM_2_SIZE       0x00000000 /* 0 MB */
 154 #define PHYS_SDRAM_3            0xa8000000 /* SDRAM Bank #3 */
 155 #define PHYS_SDRAM_3_SIZE       0x00000000 /* 0 MB */
 156 #define PHYS_SDRAM_4            0xac000000 /* SDRAM Bank #4 */
 157 #define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
 158
 159 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
 160 #define PHYS_FLASH_2            0x04000000 /* Flash Bank #2 */
 161 #define PHYS_FLASH_SIZE         0x00800000 /* 4 MB */
 162
 163 /* Not entirely sure about this - DS/CHC */
 164 #define PHYS_FLASH_BANK_SIZE    0x02000000 /* 32 MB Banks */
 165 #define PHYS_FLASH_SECT_SIZE    0x00010000 /* 64 KB sectors (x2) */
 166
 167 #define CONFIG_SYS_DRAM_BASE            PHYS_SDRAM_1
 168 #define CONFIG_SYS_DRAM_SIZE            PHYS_SDRAM_1_SIZE
 169
 170 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 171 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 172
 173 /*
 174  * GPIO settings
 175  */
 176 #define CONFIG_SYS_GPSR0_VAL            0x00000000  /* Don't set anything */
 177 #define CONFIG_SYS_GPSR1_VAL            0x00000080
 178 #define CONFIG_SYS_GPSR2_VAL            0x00000000
 179
 180 #define CONFIG_SYS_GPCR0_VAL            0x00000000  /* Don't clear anything */
 181 #define CONFIG_SYS_GPCR1_VAL            0x00000000
 182 #define CONFIG_SYS_GPCR2_VAL            0x00000000
 183
 184 #define CONFIG_SYS_GPDR0_VAL            0x00000000
 185 #define CONFIG_SYS_GPDR1_VAL            0x000007C3
 186 #define CONFIG_SYS_GPDR2_VAL            0x00000000
 187
 188 /* Edge detect registers (these are set by the kernel) */
 189 #define CONFIG_SYS_GRER0_VAL        0x00000000
 190 #define CONFIG_SYS_GRER1_VAL        0x00000000
 191 #define CONFIG_SYS_GRER2_VAL        0x00000000
 192 #define CONFIG_SYS_GFER0_VAL        0x00000000
 193 #define CONFIG_SYS_GFER1_VAL        0x00000000
 194 #define CONFIG_SYS_GFER2_VAL        0x00000000
 195
 196 #define CONFIG_SYS_GAFR0_L_VAL          0x00000000
 197 #define CONFIG_SYS_GAFR0_U_VAL          0x00000000
 198 #define CONFIG_SYS_GAFR1_L_VAL          0x00008010  /* Use FF UART Send and Receive */
 199 #define CONFIG_SYS_GAFR1_U_VAL          0x00000000
 200 #define CONFIG_SYS_GAFR2_L_VAL          0x00000000
 201 #define CONFIG_SYS_GAFR2_U_VAL          0x00000000
 202
 203 #define CONFIG_SYS_PSSR_VAL             0x20
 204 #define CONFIG_SYS_CCCR_VAL         0x00000141  /* 100 MHz memory, 200 MHz CPU  */
 205 #define CONFIG_SYS_CKEN_VAL         0x00000060  /* FFUART and STUART enabled    */
 206 #define CONFIG_SYS_ICMR_VAL         0x00000000  /* No interrupts enabled        */
 207
 208 /*
 209  * Memory settings
 210  */
 211 #define CONFIG_SYS_MSC0_VAL             0x00007FF0 /* Not properly calculated - FIXME (DS) */
 212 #define CONFIG_SYS_MSC1_VAL             0x00000000
 213 #define CONFIG_SYS_MSC2_VAL             0x00000000
 214
 215 #define CONFIG_SYS_MDCNFG_VAL           0x00000aC9 /* Memory timings for the SDRAM.
 216                                               tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
 217
 218 #define CONFIG_SYS_MDREFR_VAL           0x00403018 /* Initial setting, individual       */
 219                                            /* bits set in lowlevel_init.S       */
 220 #define CONFIG_SYS_MDMRS_VAL            0x00000000
 221
 222 /*
 223  * PCMCIA and CF Interfaces
 224  */
 225 #define CONFIG_SYS_MECR_VAL             0x00000000  /* Hangover from Lubbock.
 226                                                Needs calculating. (DS/CHC) */
 227 #define CONFIG_SYS_MCMEM0_VAL           0x00010504
 228 #define CONFIG_SYS_MCMEM1_VAL           0x00010504
 229 #define CONFIG_SYS_MCATT0_VAL           0x00010504
 230 #define CONFIG_SYS_MCATT1_VAL           0x00010504
 231 #define CONFIG_SYS_MCIO0_VAL            0x00004715
 232 #define CONFIG_SYS_MCIO1_VAL            0x00004715
 233
 234 /*
 235  * FLASH and environment organization
 236  */
 237 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 238 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* max number of sectors on one chip    */
 239
 240 /* timeout values are in ticks */
 241 /* FIXME */
 242 #define CONFIG_SYS_FLASH_ERASE_TOUT     (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 243 #define CONFIG_SYS_FLASH_WRITE_TOUT     (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 244
 245 /* Flash protection */
 246 #define CONFIG_SYS_FLASH_PROTECTION     1
 247
 248 /* FIXME */
 249 #define CONFIG_ENV_IS_IN_FLASH  1
 250 #define CONFIG_ENV_ADDR         (PHYS_FLASH_1 + 0x3C000)        /* Addr of Environment Sector   */
 251 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment */
 252 #define CONFIG_ENV_SECT_SIZE    0x20000
 253
 254 /* Option added to get around byte ordering issues in the flash driver */
 255 #define CONFIG_SYS_LITTLE_ENDIAN        1
 256
 257 #endif  /* __CONFIG_H */