[people/ms/u-boot.git] / include / configs / wandboard.h

/*
 * Copyright (C) 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Wandboard.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <config_distro_defaults.h>
#include "mx6_common.h"

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"

#define MACH_TYPE_WANDBOARD		4412
#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0

/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=ttymxc0,115200\0" \
	"splashpos=m,m\0" \
	"fdtfile=undefined\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_addr_r=0x18000000\0" \
	"fdt_addr=0x18000000\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"videoargs=" \
		"setenv nextcon 0; " \
		"if hdmidet; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
					"if=RGB24; " \
			"setenv fbmen fbmem=28M; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo - no HDMI monitor;" \
		"fi; " \
		"i2c dev 1; " \
		"if i2c probe 0x10; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
					"if=RGB666,bpp=32; " \
			"if test 0 -eq ${nextcon}; then " \
				"setenv fbmem fbmem=10M; " \
			"else " \
				"setenv fbmem ${fbmem},10M; " \
			"fi; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
		"fi; " \
		"setenv bootargs ${bootargs} ${fbmem}\0" \
	"findfdt="\
		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"ramdisk_addr_r=0x13000000\0" \
	"ramdiskaddr=0x13000000\0" \
	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(MMC, mmc, 1) \
	func(USB, usb, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#define CONFIG_BOOTCOMMAND \
	   "run findfdt; " \
	   "run distro_bootcmd"

#include <config_distro_bootcmd.h>

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif			       /* __CONFIG_H * */
Commit	Line	Data
e2d282a1 FE	1	/*
	2	* Copyright (C) 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Wandboard.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
e2d282a1 FE	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
3d99e862	12	#include <config_distro_defaults.h>
02824dc7	13	#include "mx6_common.h"
e2d282a1	14
0d1ea052 FE	15	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	16	#define CONFIG_SPL_MMC_SUPPORT
	17	#include "imx6_spl.h"
	18
e2d282a1 FE	19	#define MACH_TYPE_WANDBOARD 4412
	20	#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
	21
e2d282a1	22	/* Size of malloc() pool */
7bcb983f	23	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
e2d282a1 FE	24
e2d282a1 FE	25	#define CONFIG_BOARD_EARLY_INIT_F
eaffaa2d	26	#define CONFIG_BOARD_LATE_INIT
e2d282a1 FE	27
	28	#define CONFIG_MXC_UART
	29	#define CONFIG_MXC_UART_BASE UART1_BASE
	30
e2d282a1	31	/* Command definition */
eaffaa2d	32	#define CONFIG_CMD_BMODE
0798d578	33
e2d282a1 FE	34	#define CONFIG_SYS_MEMTEST_START 0x10000000
e2d282a1 FE	35	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
e2d282a1	36
8bc7c487	37	/* I2C Configs */
8bc7c487 OS	38	#define CONFIG_SYS_I2C
8bc7c487 OS	39	#define CONFIG_SYS_I2C_MXC
03544c66 AA	40	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	41	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	42	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
8bc7c487 OS	43	#define CONFIG_SYS_I2C_SPEED 100000
8bc7c487 OS	44
e2d282a1	45	/* MMC Configuration */
5ed15738	46	#define CONFIG_SYS_FSL_USDHC_NUM 2
e2d282a1	47	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
e2d282a1	48
9df47577	49	/* USB Configs */
9df47577 JH	50	#define CONFIG_USB_EHCI
	51	#define CONFIG_USB_EHCI_MX6
	52	#define CONFIG_USB_STORAGE
	53	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	54	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	55	#define CONFIG_MXC_USB_FLAGS 0
	56
e2d282a1	57	/* Ethernet Configuration */
e2d282a1 FE	58	#define CONFIG_FEC_MXC
	59	#define CONFIG_MII
	60	#define IMX_FEC_BASE ENET_BASE_ADDR
	61	#define CONFIG_FEC_XCV_TYPE RGMII
	62	#define CONFIG_ETHPRIME "FEC"
	63	#define CONFIG_FEC_MXC_PHYADDR 1
	64	#define CONFIG_PHYLIB
	65	#define CONFIG_PHY_ATHEROS
	66
7bcb983f FE	67	/* Framebuffer */
	68	#define CONFIG_VIDEO
	69	#define CONFIG_VIDEO_IPUV3
	70	#define CONFIG_CFB_CONSOLE
	71	#define CONFIG_VGA_AS_SINGLE_DEVICE
	72	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	73	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	74	#define CONFIG_VIDEO_BMP_RLE8
	75	#define CONFIG_SPLASH_SCREEN
a7efb026	76	#define CONFIG_SPLASH_SCREEN_ALIGN
7bcb983f FE	77	#define CONFIG_BMP_16BPP
7bcb983f FE	78	#define CONFIG_VIDEO_LOGO
a7efb026	79	#define CONFIG_VIDEO_BMP_LOGO
7bcb983f	80	#define CONFIG_IPUV3_CLK 260000000
0ef797a5	81	#define CONFIG_CMD_HDMIDETECT
5ea7f0e3	82	#define CONFIG_IMX_HDMI
8bc7c487	83	#define CONFIG_IMX_VIDEO_SKIP
7bcb983f	84
0d1ea052	85	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
e2d282a1	86	#define CONFIG_EXTRA_ENV_SETTINGS \
acc6bb56	87	"console=ttymxc0,115200\0" \
d727ab3c	88	"splashpos=m,m\0" \
0d1ea052	89	"fdtfile=undefined\0" \
e2d282a1 FE	90	"fdt_high=0xffffffff\0" \
e2d282a1 FE	91	"initrd_high=0xffffffff\0" \
acc6bb56	92	"fdt_addr_r=0x18000000\0" \
6584a1b5	93	"fdt_addr=0x18000000\0" \
e2d282a1	94	"ip_dyn=yes\0" \
1e1cbde0	95	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
0798d578 OS	96	"update_sd_firmware_filename=u-boot.imx\0" \
	97	"update_sd_firmware=" \
	98	"if test ${ip_dyn} = yes; then " \
	99	"setenv get_cmd dhcp; " \
	100	"else " \
	101	"setenv get_cmd tftp; " \
	102	"fi; " \
	103	"if mmc dev ${mmcdev}; then " \
	104	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	105	"setexpr fw_sz ${filesize} / 0x200; " \
	106	"setexpr fw_sz ${fw_sz} + 1; " \
	107	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	108	"fi; " \
	109	"fi\0" \
0ef797a5 OS	110	"videoargs=" \
	111	"setenv nextcon 0; " \
	112	"if hdmidet; then " \
	113	"setenv bootargs ${bootargs} " \
	114	"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
	115	"if=RGB24; " \
	116	"setenv fbmen fbmem=28M; " \
	117	"setexpr nextcon ${nextcon} + 1; " \
	118	"else " \
	119	"echo - no HDMI monitor;" \
	120	"fi; " \
	121	"i2c dev 1; " \
	122	"if i2c probe 0x10; then " \
	123	"setenv bootargs ${bootargs} " \
	124	"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
99c618ff	125	"if=RGB666,bpp=32; " \
0ef797a5 OS	126	"if test 0 -eq ${nextcon}; then " \
	127	"setenv fbmem fbmem=10M; " \
	128	"else " \
	129	"setenv fbmem ${fbmem},10M; " \
	130	"fi; " \
	131	"setexpr nextcon ${nextcon} + 1; " \
	132	"else " \
	133	"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
	134	"fi; " \
	135	"setenv bootargs ${bootargs} ${fbmem}\0" \
0d1ea052	136	"findfdt="\
9a8804a8	137	"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
0d1ea052	138	"setenv fdtfile imx6q-wandboard.dtb; fi; " \
9a8804a8	139	"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
0d1ea052	140	"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
9a8804a8 FE	141	"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
	142	"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
	143	"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
	144	"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
0d1ea052 FE	145	"if test $fdtfile = undefined; then " \
0d1ea052 FE	146	"echo WARNING: Could not determine dtb to use; fi; \0" \
acc6bb56	147	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
d3b78e18	148	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
acc6bb56 VC	149	"ramdisk_addr_r=0x13000000\0" \
	150	"ramdiskaddr=0x13000000\0" \
	151	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	152	BOOTENV
	153
	154	#define BOOT_TARGET_DEVICES(func) \
	155	func(MMC, mmc, 0) \
	156	func(MMC, mmc, 1) \
	157	func(USB, usb, 0) \
	158	func(PXE, pxe, na) \
	159	func(DHCP, dhcp, na)
e2d282a1 FE	160
e2d282a1 FE	161	#define CONFIG_BOOTCOMMAND \
0d1ea052	162	"run findfdt; " \
acc6bb56 VC	163	"run distro_bootcmd"
acc6bb56 VC	164
acc6bb56	165	#include <config_distro_bootcmd.h>
e2d282a1	166
e2d282a1 FE	167	/* Physical Memory Map */
	168	#define CONFIG_NR_DRAM_BANKS 1
	169	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	170
	171	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	172	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	173	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	174
	175	#define CONFIG_SYS_INIT_SP_OFFSET \
	176	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	177	#define CONFIG_SYS_INIT_SP_ADDR \
	178	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	179
056845c2	180	/* Environment organization */
e2d282a1 FE	181	#define CONFIG_ENV_SIZE (8 * 1024)
	182
	183	#define CONFIG_ENV_IS_IN_MMC
	184	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	185	#define CONFIG_SYS_MMC_ENV_DEV 0
	186
e2d282a1	187	#endif /* __CONFIG_H * */