getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd...

[thirdparty/man-pages.git] / man2 / accept.2

.\" Copyright (c) 1983, 1990, 1991 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" %%%LICENSE_START(BSD_4_CLAUSE_UCB)
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\" %%%LICENSE_END
.\"
.\" Modified 1993-07-24 by Rik Faith <faith@cs.unc.edu>
.\" Modified 1996-10-21 by Eric S. Raymond <esr@thyrsus.com>
.\" Modified 1998-2000 by Andi Kleen to match Linux 2.2 reality
.\" Modified 2002-04-23 by Roger Luethi <rl@hellgate.ch>
.\" Modified 2004-06-17 by Michael Kerrisk <mtk.manpages@gmail.com>
.\" 2008-12-04, mtk, Add documentation of accept4()
.\"
.TH ACCEPT 2 2019-03-06 "Linux" "Linux Programmer's Manual"
.SH NAME
accept, accept4 \- accept a connection on a socket
.SH SYNOPSIS
.nf
.BR "#include <sys/types.h>" "          /* See NOTES */"
.B #include <sys/socket.h>
.PP
.BI "int accept(int " sockfd ", struct sockaddr *" addr ", socklen_t *" addrlen );

.BR "#define _GNU_SOURCE" "             /* See feature_test_macros(7) */"
.B #include <sys/socket.h>
.PP
.BI "int accept4(int " sockfd ", struct sockaddr *" addr ,
.BI "            socklen_t *" addrlen ", int " flags );
.fi
.SH DESCRIPTION
The
.BR accept ()
system call is used with connection-based socket types
.RB ( SOCK_STREAM ,
.BR SOCK_SEQPACKET ).
It extracts the first connection request on the queue of pending
connections for the listening socket,
.IR sockfd ,
creates a new connected socket, and returns a new file
descriptor referring to that socket.
The newly created socket is not in the listening state.
The original socket
.I sockfd
is unaffected by this call.
.PP
The argument
.I sockfd
is a socket that has been created with
.BR socket (2),
bound to a local address with
.BR bind (2),
and is listening for connections after a
.BR listen (2).
.PP
The argument
.I addr
is a pointer to a
.I sockaddr
structure.
This structure is filled in with the address of the peer socket,
as known to the communications layer.
The exact format of the address returned
.I addr
is determined by the socket's address family (see
.BR socket (2)
and the respective protocol man pages).
When
.I addr
is NULL, nothing is filled in; in this case,
.I addrlen
is not used, and should also be NULL.
.PP
The
.I addrlen
argument is a value-result argument:
the caller must initialize it to contain the
size (in bytes) of the structure pointed to by
.IR addr ;
on return it will contain the actual size of the peer address.
.PP
The returned address is truncated if the buffer provided is too small;
in this case,
.I addrlen
will return a value greater than was supplied to the call.
.PP
If no pending
connections are present on the queue, and the socket is not marked as
nonblocking,
.BR accept ()
blocks the caller until a connection is present.
If the socket is marked
nonblocking and no pending connections are present on the queue,
.BR accept ()
fails with the error
.BR EAGAIN
or
.BR EWOULDBLOCK .
.PP
In order to be notified of incoming connections on a socket, you can use
.BR select (2),
.BR poll (2),
or
.BR epoll (7).
A readable event will be delivered when a new connection is attempted and you
may then call
.BR accept ()
to get a socket for that connection.
Alternatively, you can set the socket to deliver
.B SIGIO
when activity occurs on a socket; see
.BR socket (7)
for details.
.PP
If
.IR flags
is 0, then
.BR accept4 ()
is the same as
.BR accept ().
The following values can be bitwise ORed in
.IR flags
to obtain different behavior:
.TP 16
.B SOCK_NONBLOCK
Set the
.BR O_NONBLOCK
file status flag on the open file description (see
.BR open (2))
referred to by the new file descriptor.
Using this flag saves extra calls to
.BR fcntl (2)
to achieve the same result.
.TP
.B SOCK_CLOEXEC
Set the close-on-exec
.RB ( FD_CLOEXEC )
flag on the new file descriptor.
See the description of the
.B O_CLOEXEC
flag in
.BR open (2)
for reasons why this may be useful.
.SH RETURN VALUE
On success,
these system calls return a nonnegative integer that is a file descriptor
for the accepted socket.
On error, \-1 is returned, and
.I errno
is set appropriately.
.SS Error handling
Linux
.BR accept ()
(and
.BR accept4 ())
passes already-pending network errors on the new socket
as an error code from
.BR accept ().
This behavior differs from other BSD socket
implementations.
For reliable operation the application should detect
the network errors defined for the protocol after
.BR accept ()
and treat
them like
.B EAGAIN
by retrying.
In the case of TCP/IP, these are
.BR ENETDOWN ,
.BR EPROTO ,
.BR ENOPROTOOPT ,
.BR EHOSTDOWN ,
.BR ENONET ,
.BR EHOSTUNREACH ,
.BR EOPNOTSUPP ,
and
.BR ENETUNREACH .
.SH ERRORS
.TP
.BR EAGAIN " or " EWOULDBLOCK
.\" Actually EAGAIN on Linux
The socket is marked nonblocking and no connections are
present to be accepted.
POSIX.1-2001 and POSIX.1-2008
allow either error to be returned for this case,
and do not require these constants to have the same value,
so a portable application should check for both possibilities.
.TP
.B EBADF
.I sockfd
is not an open file descriptor.
.TP
.B ECONNABORTED
A connection has been aborted.
.TP
.B EFAULT
The
.I addr
argument is not in a writable part of the user address space.
.TP
.B EINTR
The system call was interrupted by a signal that was caught
before a valid connection arrived; see
.BR signal (7).
.TP
.B EINVAL
Socket is not listening for connections, or
.I addrlen
is invalid (e.g., is negative).
.TP
.B EINVAL
.RB ( accept4 ())
invalid value in
.IR flags .
.TP
.B EMFILE
The per-process limit on the number of open file descriptors has been reached.
.TP
.B ENFILE
The system-wide limit on the total number of open files has been reached.
.TP
.BR ENOBUFS ", " ENOMEM
Not enough free memory.
This often means that the memory allocation is limited by the socket buffer
limits, not by the system memory.
.TP
.B ENOTSOCK
The file descriptor
.I sockfd
does not refer to a socket.
.TP
.B EOPNOTSUPP
The referenced socket is not of type
.BR SOCK_STREAM .
.TP
.B EPROTO
Protocol error.
.PP
In addition, Linux
.BR accept ()
may fail if:
.TP
.B EPERM
Firewall rules forbid connection.
.PP
In addition, network errors for the new socket and as defined
for the protocol may be returned.
Various Linux kernels can
return other errors such as
.BR ENOSR ,
.BR ESOCKTNOSUPPORT ,
.BR EPROTONOSUPPORT ,
.BR ETIMEDOUT .
The value
.B ERESTARTSYS
may be seen during a trace.
.SH VERSIONS
The
.BR accept4 ()
system call is available starting with Linux 2.6.28;
support in glibc is available starting with version 2.10.
.SH CONFORMING TO
.BR accept ():
POSIX.1-2001, POSIX.1-2008,
SVr4, 4.4BSD
.RB ( accept ()
first appeared in 4.2BSD).
.\" The BSD man page documents five possible error returns
.\" (EBADF, ENOTSOCK, EOPNOTSUPP, EWOULDBLOCK, EFAULT).
.\" POSIX.1-2001 documents errors
.\" EAGAIN, EBADF, ECONNABORTED, EINTR, EINVAL, EMFILE,
.\" ENFILE, ENOBUFS, ENOMEM, ENOTSOCK, EOPNOTSUPP, EPROTO, EWOULDBLOCK.
.\" In addition, SUSv2 documents EFAULT and ENOSR.
.PP
.BR accept4 ()
is a nonstandard Linux extension.
.PP
On Linux, the new socket returned by
.BR accept ()
does \fInot\fP inherit file status flags such as
.B O_NONBLOCK
and
.B O_ASYNC
from the listening socket.
This behavior differs from the canonical BSD sockets implementation.
.\" Some testing seems to show that Tru64 5.1 and HP-UX 11 also
.\" do not inherit file status flags -- MTK Jun 05
Portable programs should not rely on inheritance or noninheritance
of file status flags and always explicitly set all required flags on
the socket returned from
.BR accept ().
.SH NOTES
POSIX.1-2001 does not require the inclusion of
.IR <sys/types.h> ,
and this header file is not required on Linux.
However, some historical (BSD) implementations required this header
file, and portable applications are probably wise to include it.
.PP
There may not always be a connection waiting after a
.B SIGIO
is delivered or
.BR select (2),
.BR poll (2),
or
.BR epoll (7)
return a readability event because the connection might have been
removed by an asynchronous network error or another thread before
.BR accept ()
is called.
If this happens, then the call will block waiting for the next
connection to arrive.
To ensure that
.BR accept ()
never blocks, the passed socket
.I sockfd
needs to have the
.B O_NONBLOCK
flag set (see
.BR socket (7)).
.PP
For certain protocols which require an explicit confirmation,
such as DECnet,
.BR accept ()
can be thought of as merely dequeuing the next connection request and not
implying confirmation.
Confirmation can be implied by
a normal read or write on the new file descriptor, and rejection can be
implied by closing the new socket.
Currently, only DECnet has these semantics on Linux.
.\"
.SS The socklen_t type
In the original BSD sockets implementation (and on other older systems)
.\" such as Linux libc4 and libc5, SunOS 4, SGI
the third argument of
.BR accept ()
was declared as an \fIint\ *\fP.
A POSIX.1g draft
standard wanted to change it into a \fIsize_t\ *\fPC;
.\" SunOS 5 has 'size_t *'
later POSIX standards and glibc 2.x have
.IR "socklen_t\ * ".
.SH EXAMPLE
See
.BR bind (2).
.SH SEE ALSO
.BR bind (2),
.BR connect (2),
.BR listen (2),
.BR select (2),
.BR socket (2),
.BR socket (7)