ChangeLog

   1 2003-12-27  Martin Mares  <mj@ucw.cz>
   2
   3         Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
   4         and cleaned up:
   5
   6         * lib/configure: Recognize SunOS.
   7         * lib/internal.h: Learn how to recognize byte order on SunOS.
   8         * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
   9         * lib/i386-io-linux.h: Linux specific part.
  10         * lib/i386-io-hurd.h: GNU/Hurd specific part.
  11         * lib/i386-io-sunos.h: SunOS specific part.
  12
  13 2003-12-26  Martin Mares  <mj@ucw.cz>
  14
  15         * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
  16
  17         * lib/pci.h: Types declared in <sys/types.h> should be usable on all
  18         platforms we currently support, so kill the forest of #ifdef's and
  19         use them in all cases.
  20
  21         * lib/pci.h: Use ULONG_MASK to decide whether we should use long
  22         or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
  23         Define format strings for addresses, port numbers and IRQ numbers
  24         directly in pci.h.
  25
  26         * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
  27
  28 2003-12-26  Marco Gerards  <metgerards@student.han.nl>
  29
  30         Added support for the GNU Hurd (cleaned up by Martin Mares):
  31
  32         * lib/configure [GNU]: Use the i386 ports for configuration access.
  33         * lib/i386-ports.c: Don't call iopl() on the Hurd.
  34         * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
  35         u8 to u32.
  36
  37 2003-12-26  Martin Mares  <mj@ucw.cz>
  38
  39         * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
  40         config_fetch() to ensure that the registers have been read. Thanks to
  41         Bill Wood <bill.wood@hp.com> for the patch.
  42
  43         * lspci.c: Ensure that failure of config_fetch() is handled correctly
  44         at all places.
  45
  46         * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
  47         Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
  48
  49         * setpci.c (main): Better error messages.
  50
  51         * setpci.c (ex_op): The demo mode should disable only writing, not reading.
  52
  53         * setpci.man: The documentation was inconsistent on what should -D do.
  54         Document the new behaviour.
  55
  56         * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
  57         the GCC specific __attribute__((noreturn)) and killed the hack with
  58         redefining __attribute__ on non-GCC compilers.
  59
  60         * Makefile: Added missing dependencies. Parallel builds work now.
  61         Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
  62         a different fix.
  63
  64         * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
  65         command every time $(MANDIR) is referenced.
  66
  67         * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
  68         a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
  69
  70         * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
  71         Reported by Gary Parnes <gary_parnes@terago.com>.
  72
  73         * Replaced obsolete syntax of __attribute__((unused)) in the middle of
  74         parameter declarations (which is no longer supported by GCC 3.1) by the
  75         current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
  76         for reporting this problem.
  77
  78         * Removed CVS $Id$ tags from all files.
  79
  80         * Makefile: Added some more warnings.
  81
  82         * setpci.c: Cleaned up mask/value code.
  83
  84 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
  85
  86         * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
  87
  88 2003-11-29  Martin Mares  <mj@ucw.cz>
  89
  90         * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
  91
  92 2003-01-04  Martin Mares  <mj@ucw.cz>
  93
  94         * Released as 2.1.11.
  95
  96         * Makefile: Changed configuration of installation directories --
  97         all paths are now set at the top of the Makefile instead of being
  98         scattered between the installation rules. The default installation
  99         now goes always to /usr/local regardless of the OS as most distributions
 100         already contain some version of pciutils and we don't want custom
 101         installations to interfere with the default ones.
 102
 103         * Makefile: Removed a couple of ancient install hacks: we no longer
 104         try to avoid overwriting a newer pci.ids file (users are now expected
 105         to use update-ids) and we don't try to remove /etc/pci.ids (a long time
 106         has passed since the last version which used it).
 107
 108         * Makefile: Paths to pci.ids in man pages automatically get the right path.
 109
 110         * Added the update-ids utility.
 111
 112         * lib: Removed partially implemented "syscall" access method which will
 113         probably never be needed.
 114
 115 2002-12-27  Martin Mares  <mj@ucw.cz>
 116
 117         * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
 118
 119         * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
 120         discontiguous numbering of functions. This is already present in the Linux
 121         kernel for several years, but I forgot to update pciutils as well.
 122
 123 2002-12-26  Martin Mares  <mj@ucw.cz>
 124
 125         * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
 126
 127         * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
 128         there is no reason to prefer the kernel version.
 129
 130         * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
 131
 132         * Added preliminary version of NetBSD support by Quentin Garnier
 133         <netbsd@quatriemek.com>.
 134
 135 2002-04-06  Martin Mares  <mj@ucw.cz>
 136
 137         * lspci.c: Mention "-xxx" in the help.
 138
 139 2002-03-30  Martin Mares  <mj@ucw.cz>
 140
 141         * Released as 2.1.10.
 142
 143         * Removed pci.ids from the CVS as they are now maintained separately.
 144         They are still included in the tarball, but if you are building pciutils
 145         from CVS sources or you want to get a newer ID file than the one distributed,
 146         just use "make update-ids" to download the most recent snapshot from
 147         pciids.sf.net.
 148
 149         * Makefile, README: Updated accordingly.
 150
 151         * Makefile: Added a couple of maintenance targets.
 152
 153         * maint/*: Maintainer's utilities now reside here (present only in CVS,
 154         not in the tarball).
 155
 156         * lib/names.c (parse_name_list): End-of-line comments are no longer
 157         supported. Hashes are now perfectly valid in all names and they start
 158         a comment only at the start of the line.
 159
 160 2002-03-26  Martin Mares  <mj@ucw.cz>
 161
 162         * README: Rewritten.
 163
 164         * Makefile: When the currently installed pci.ids file is newer than
 165         the version to be installed, don't overwrite it. Suggested by
 166         Jean Delvare <khali@linux-fr.org>.
 167
 168 2002-03-24  Martin Mares  <mj@ucw.cz>
 169
 170         * lspci.c (show_pcix_bridge): Added PCI-X capability display.
 171         Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
 172
 173         * lib/header.h: Added PCI-X stuff. Again by Jeff.
 174
 175         * Makefile (CFLAGS): -Werror is gone.
 176
 177         * lspci.c (format_agp_rate): Fixed AGP rate reporting.
 178
 179         * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
 180         function 7.
 181
 182         * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
 183         or device hexadecimally, don't confuse it with chip vendor/device ID.
 184         First reported by Marc Boucher <marc@mbsi.ca>.
 185
 186 2001-11-04  Martin Mares  <mj@ucw.cz>
 187
 188         * Released as 2.1.9.
 189
 190         * pci.ids: Synced with the PCI ID Repository at SourceForge
 191         (http://pciids.sourceforge.net/).
 192
 193 2000-08-25  Martin Mares  <mj@albireo.ucw.cz>
 194
 195         * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
 196
 197 2000-06-13  Martin Mares  <mj@albireo.ucw.cz>
 198
 199         * Makefile (uninstall): Fixed.
 200
 201         * pci.ids: ID updates.
 202
 203 2000-05-20  Martin Mares  <mj@albireo.ucw.cz>
 204
 205         * Released as 2.1.8.
 206
 207         * pci.ids: ID updates.
 208
 209         * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
 210
 211 2000-05-04  Martin Mares  <mj@albireo.ucw.cz>
 212
 213         * lspci.c (show_verbose): If the header type doesn't match device
 214         class, just print a warning and still use the header type, assuming
 215         bogus class info.
 216
 217 2000-05-01  Martin Mares  <mj@albireo.ucw.cz>
 218
 219         * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
 220
 221         * pci.ids: Updated Contemporary Control ARCnet card entries.
 222
 223         * pci.ids: Synchronized class list with latest PCI SIG documents.
 224
 225 2000-04-29  Martin Mares  <mj@albireo.ucw.cz>
 226
 227         * lib/names.c (pci_lookup_name): Fixed the cheat.
 228
 229         * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
 230
 231         * pci.ids: Various ID updates.
 232
 233 2000-04-21  Martin Mares  <mj@albireo.ucw.cz>
 234
 235         * Released as 2.1.7.
 236
 237         * pciutils.spec: Added German description.
 238
 239         * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
 240         are the same as device ID and just output subsystem name according to
 241         device name.
 242
 243         * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
 244
 245         * lib/pci.h: Added the correct typedefs for AIX.
 246
 247         * lib/generic.c (pci_generic_scan_bus): Export.
 248
 249         * lib/configure: Detect AIX. Use "echo '...\c'" instead of
 250         "echo -n" if the shell isn't bash.
 251
 252         * lspci.c: Avoid using alloca() if not compiled by GCC.
 253         (insert_dev): Avoid returning a void value.
 254
 255         * Makefile: Choose which install utility to use according to
 256         OS type. Also use `-o' instead of `-or' in find arguments.
 257         Part of the AIX port.
 258
 259         * lib/aix-device.c: Added AIX low-level interface. Contributed
 260         by Dave Johnson <ddj@brown.edu>, thanks a lot!
 261
 262         * pci.ids: Few new ID's.
 263
 264         * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
 265         when not compiled by GCC.
 266
 267 2000-04-17  Martin Mares  <mj@albireo.ucw.cz>
 268
 269         * Released as 2.1.6.
 270
 271         * pci.ids: Added a large batch of ID's contributed by Gunther
 272         Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
 273         list with the 2.3.99pre6 kernel.
 274
 275 Thu Mar  9 13:11:39 2000  Martin Mares  <mj@albireo.ucw.cz>
 276
 277         * lib/example.c: Added a simple example of how to use
 278         the library.
 279
 280         * lspci.man, setpci.man: Revealed --version. Well spotted
 281         by Adam Sulmicki.
 282
 283         * pci.ids: Added lots of new ID's and synced with 2.3.50.
 284
 285 Tue Feb 15 00:16:21 2000  Martin Mares  <mj@albireo.ucw.cz>
 286
 287         * Released as 2.1.5.
 288
 289         * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
 290         %{_mandir} to find the right location to install manual pages to.
 291
 292         * pci.ids: New ID's.
 293
 294         * setpci.c (main): Don't crash when `-s' or `-d' is given with
 295         no argument.
 296
 297 Mon Jan 24 20:04:11 2000  Andreas Jaeger  <aj@suse.de>
 298
 299         * lib/i386-ports.c: Include <asm/io.h> only on systems without
 300         glibc.
 301
 302 Mon Jan 24 11:24:43 2000  Martin Mares  <mj@albireo.ucw.cz>
 303
 304         * Makefile: Modified to work with the Linux FHS brain-damaged idea
 305         of putting man pages to /usr/share/man. Now we choose either /usr/man
 306         or /usr/share/man depending on which one exists.
 307
 308 Sun Jan 23 10:52:34 2000  Martin Mares  <mj@albireo.ucw.cz>
 309
 310         * pci.ids: Synced with Linux 2.3.40.
 311
 312         * Released as version 2.1.4.
 313
 314 Thu Jan 20 11:08:32 2000  Martin Mares  <mj@albireo.ucw.cz>
 315
 316         * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
 317
 318         * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
 319
 320         * lspci.c (format_agp_rate): Better formatting of AGP rates.
 321
 322         * pci.ids: New ID's.
 323
 324         * lib/configure: Added configuration for ia64 (the same as for Alpha).
 325         Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
 326
 327 Thu Jan 13 23:01:52 2000  Martin Mares  <mj@albireo.ucw.cz>
 328
 329         * Released as version 2.1.3.
 330
 331         * pci.ids: New ID's.
 332
 333         * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
 334
 335         * lib/access.c: Corrected order of access methods -- it's wonderful how
 336         long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
 337
 338 Sat Dec 11 23:34:48 1999  Martin Mares  <mj@albireo.ucw.cz>
 339
 340         * Released as version 2.1.2.
 341
 342         * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
 343
 344 Sat Dec  4 13:11:03 1999  Martin Mares  <mj@albireo.ucw.cz>
 345
 346         * Released as version 2.1.1.
 347
 348         * pci.ids: Several new ID's.
 349
 350         * setpci.c (exec_op): Don't forget to increment address after writing
 351         single value, so that `30.b=12,34,56,78' works as expected. Reported
 352         by Petr Soucek <petr@ryston.cz>.
 353
 354 Wed Nov  3 10:24:38 1999  Martin Mares  <mj@albireo.ucw.cz>
 355
 356         * lspci.c (show_terse): If prog-if is zero, but it's present in the
 357         ID list, show it.
 358
 359 Sat Oct 30 11:06:35 1999  Martin Mares  <mj@albireo.ucw.cz>
 360
 361         * Released as version 2.1.
 362
 363         * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
 364         lots of contributed entries.
 365
 366 Thu Oct 14 10:40:12 1999  Dave Jones    <dave@powertweak.com>
 367
 368         * pci.ids: Added lots of subsystem definitions.
 369
 370 Sat Oct  9 14:32:28 1999  Martin Mares  <mj@albireo.ucw.cz>
 371
 372         * setpci.man: Better example.
 373
 374         * lspci.c: Resolve prog-if names.
 375
 376         * lib/names.c: Adapted to new pci.ids syntax.
 377
 378         * pci.ids: Reorganized the pci.ids file. Subsystems are listed
 379         under devices, classes can optionally contain prog-if information.
 380         New ID's, as usually.
 381
 382 Wed Sep 22 09:45:24 1999  Martin Mares  <mj@albireo.ucw.cz>
 383
 384         * pci.ids: New ID's. As usually.
 385
 386         * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
 387         unless we're vvvery verbose.
 388
 389 Mon Sep 20 11:22:54 1999  Martin Mares  <mj@albireo.ucw.cz>
 390
 391         * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
 392
 393 Tue Sep 14 09:31:01 1999  Martin Mares  <mj@albireo.ucw.cz>
 394
 395         * pci.ids: New ID's. Again.
 396
 397 Thu Aug  5 17:45:42 1999  Martin Mares  <mj@albireo.ucw.cz>
 398
 399         * lspci.c (show_size): Don't show size if it's zero (usually
 400         due to bus-centric mode being enabled).
 401
 402 Tue Jul 20 13:25:09 1999  Martin Mares  <mj@albireo.ucw.cz>
 403
 404         * lib/pci.h: Types are OS dependent.
 405
 406         * lib/internal.h: Byte order hacks are OS dependent.
 407
 408         * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
 409
 410         * lib/Makefile, lib/access.c: Added fbsd-device target.
 411
 412         * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
 413         incorrectly set to device ID.
 414
 415         * README: Added a note that we support FreeBSD.
 416
 417         * Makefile (PREFIX, ROOT): Set it depending on the OS.
 418         (%.8): Grrr, BSD date is not able to convert date formats the same way
 419         as GNU date does. Use sed instead.
 420         (install): Use `-c' when calling install.
 421
 422         * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
 423         by Jari Kirma <kirma@cs.hut.fi>.
 424
 425         * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
 426         and pwrite only when we are certain it's safe (i.e., glibc 2.1
 427         on all architectures or any libc on a i386 where we really know
 428         how to use syscalls directly). In all other cases, emulate it
 429         with lseek/read/write.
 430
 431         * pci.ids: Some more IDs.
 432
 433 Mon Jul 19 14:10:36 1999  Martin Mares  <mj@albireo.ucw.cz>
 434
 435         * pci.ids: Added IDs of parallel port controller cards as sent
 436         by Tim Waugh <tim@cyberelk.demon.co.uk>.
 437
 438 Wed Jul  7 00:55:48 1999  Martin Mares  <mj@albireo.ucw.cz>
 439
 440         * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
 441
 442         * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
 443         HAVE_LONG_ADDRESS.
 444
 445         * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
 446         are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
 447         to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
 448         and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
 449         on Alpha.
 450
 451         * lspci.c (show_msi): Added dumping of the MSI capability.
 452         (show_slotid): The same for SlotID capability.
 453         (show_caps): Seperated capability dumping, because it should
 454         be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
 455         layout of htype2, so I'm a bit unsure about it wrt capabilities
 456         -- they at least have to live somewhere else since address 0x34
 457         is already defined differently in htype2.
 458
 459         * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
 460         (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
 461         (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
 462
 463         * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
 464         (required by the PCI 2.2 specs).
 465
 466 Mon Jul  5 12:45:19 1999  Martin Mares  <mj@albireo.ucw.cz>
 467
 468         * lspci.c (show_size): Added new function for dumping of region sizes.
 469         (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
 470         ROMs et cetera.
 471
 472         * lib/pci.h (struct pci_dev): known_fields moved to the public part
 473         of the structure.
 474
 475         * Added support for region sizes. Needs support in the kernel, because
 476         sizes have to be scanned before drivers initialize yourself. pci_fill_info()
 477         now returns a bitmask of what fields were really read.
 478
 479 Mon Jun 28 18:37:51 1999  Dave Jones    <dave@powertweak.com>
 480
 481         * Makefile:
 482           Added `uninstall' target - removes all traces of pciutils.
 483         * pci.ids:
 484           - Lots of cleanups in the ATI, S3, Adaptec vendors.
 485           - Changed Compaq QVision 1280/p definitions, as it's not possible
 486             to determine the revision from the device ID.
 487           - Same for the Tseng ET4000.
 488             The id's said I had a rev C, when it was actually a rev B.
 489           - Removed some unnecessary strings
 490             `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
 491             `Ethernet card'. This should be determined from config space.
 492           - Lots of other new vendors & devices
 493           - Other additional small cleanups.
 494
 495 Mon Jun 21 22:11:10 1999  Martin Mares  <mj@albireo.ucw.cz>
 496
 497         * lib/names.c (pci_lookup_name): When device ID lookup
 498         fails, return hexadecimal device ID instead of vendor ID.
 499         Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
 500         I've just extended the fix to subsystem ID's.
 501
 502 Thu Jun 17 19:48:21 1999  Martin Mares  <mj@albireo.ucw.cz>
 503
 504         * lspci.c (show_agp): Bug fix from Petr Vandrovec
 505         <vandrove@vc.cvut.cz>. The command register was displayed
 506         incorrectly.
 507
 508 Wed Jun  2 22:42:44 1999  Martin Mares  <mj@albireo.ucw.cz>
 509
 510         * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
 511         numbers if not supplied by the libc.
 512
 513 Wed May 19 13:24:39 1999  Martin Mares  <mj@albireo.ucw.cz>
 514
 515         * Released the whole package as version 2.0.
 516
 517 Fri May 14 22:42:02 1999  Martin Mares  <mj@albireo.ucw.cz>
 518
 519         * pci.ids: Added several new ID's contributed by people
 520         on the linux-pci list.
 521
 522 Mon Apr 19 15:21:08 1999  Jakub Jelinek  <jj@ultra.linux.cz>
 523
 524         * lspci.c: Display I/O addresses correctly on sparc64.
 525         * lib/header.h: Ditto.
 526
 527         * lib/configure: On sparc set HAVE_64BIT* as well, we want
 528         a binary which works on both 32bit and 64bit SPARCs.
 529
 530 Sun Apr 18 21:14:58 1999  Martin Mares  <mj@albireo.ucw.cz>
 531
 532         * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
 533         <mjacob@feral.com>.
 534
 535         * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
 536
 537 Sun Feb 28 22:26:21 1999  Martin Mares  <mj@albireo.ucw.cz>
 538
 539         * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
 540         as a multi-function device, because several single-function devices
 541         don't decode the function bits at all.
 542
 543 Sun Feb 14 23:48:22 1999  Martin Mares  <mj@albireo.ucw.cz>
 544
 545         * Makefile (install): Don't use "-o root -g root" for installation
 546         since it breaks on machines where programs are not installed by root.
 547         Reported by Richard Gooch <rgooch@atnf.csiro.au>
 548
 549 Tue Feb  9 15:54:39 1999  Martin Mares  <mj@albireo.ucw.cz>
 550
 551         * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
 552
 553         * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
 554         or 64-bit depending on CPU.
 555
 556         * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
 557         according to bus address width.
 558
 559 Thu Jan 28 20:54:16 1999  Martin Mares  <mj@albireo.ucw.cz>
 560
 561         * Released as 1.99.4.
 562
 563         * lspci.c: Capability list parser now recognizes both AGP
 564         registers and PCI Power Management registers (the latter
 565         is mainly guesswork based on DEC/Intel 21153 bridge specs
 566         since I don't have the PCI Power Management document).
 567
 568         * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
 569         by FLAG macro.
 570
 571         * lspci.c: Added bridge checks to bus mapping code.
 572
 573 Wed Jan 27 14:59:16 1999  Martin Mares  <mj@albireo.ucw.cz>
 574
 575         * lspci.c: Implemented bus mapping mode (-M).
 576
 577         * lspci.c (scan_devices): Split to scan_devices() and scan_device().
 578         (show): Split to show() and show_device().
 579
 580         * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
 581         set it to the real access method afterwards.
 582
 583 Mon Jan 25 23:46:13 1999  Martin Mares  <mj@albireo.ucw.cz>
 584
 585         * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
 586         don't check PCI_COMMAND for I/O and memory enables.
 587
 588 Mon Jan 25 21:28:49 1999  Martin Mares  <mj@albireo.ucw.cz>
 589
 590         * Makefile: Added target `release' which substitutes new version
 591         number to .spec, .lsm and README. Also rewrote target `dist'.
 592
 593         * Released as 1.99.3.
 594
 595 Sun Jan 24 22:10:36 1999  Martin Mares  <mj@albireo.ucw.cz>
 596
 597         * lib/header.h: Until kernel adopts new layout of PCI
 598         includes (i.e., separate declaration of header structure,
 599         functions and device IDs), which is not going to happen
 600         before 2.3, we'll use our own definiton of the header.
 601
 602         * lspci.c (show_verbose): Display `Cap' flag in device status.
 603
 604         * lspci.c (show_htype0): Display capability lists whereever
 605         available. The only capability name we recognize now is `AGP'.
 606         Unfortunately, capabilities are stored in device-dependent
 607         portion of the configuration space and are thus available
 608         only to root unless you read a dump.
 609
 610         * lspci.c (scan_devices): Use cache instead of buffering.
 611
 612         * lib/buffer.c: Removed (obsoleted by the cache).
 613
 614         * lib/access.c: Added general caching mechanism.
 615
 616 Sat Jan 23 21:30:54 1999  Martin Mares  <mj@albireo.ucw.cz>
 617
 618         * pci.ids: Added few devices.
 619
 620 Fri Jan 22 19:29:31 1999  Martin Mares  <mj@albireo.ucw.cz>
 621
 622         * Version string is now defined in top-level Makefile, exported
 623         to the configure script and also substituted to man pages.
 624
 625         * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
 626         (show_verbose): Rewrote interrupt display logic.
 627
 628         * lib/i386-ports.c: Include sys/io.h only on glibc systems.
 629
 630         * lib/configure: Rewrote detection of Linux versions. Now it
 631         works on 2.0 kernels (only with direct/dump access, of course).
 632
 633         * lib/internal.h: New bytesex macros using <asm/byteorder.h>
 634         whenever available.
 635
 636         * lib/proc.c (proc_read, proc_write): Distinguish between short
 637         read/write and real errors.
 638
 639         * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
 640         libpci respects buscentric mode automatically.
 641
 642         * lspci.c (show_hex_dump): For CardBus bridges, print out 128
 643         bytes of header (the whole standard part).
 644
 645         * common.c: pcilib options are now all uppercase. Also moved
 646         PCI access debugging option here.
 647
 648         * Released as 1.99.2.
 649
 650 Wed Jan 20 22:50:35 1999  Martin Mares  <mj@albireo.ucw.cz>
 651
 652         * Wrote configure script and rewrote Makefiles.
 653
 654         * Removed few unused variables.
 655
 656 Wed Jan 20 12:21:56 1999  Martin Mares  <mj@albireo.ucw.cz>
 657
 658         * common.c: Moved several functions used in both setpci and lspci
 659         here. This includes parsing of libpci-related options.
 660
 661         * More library tweaks.
 662
 663         * filter.c, names.c: Moved to library.
 664
 665         * setpci: Rewritten to use the library.
 666
 667         * Released as 1.99.1.
 668
 669 Tue Jan 19 23:00:12 1999  Martin Mares  <mj@albireo.ucw.cz>
 670
 671         * lspci.c (scan_devices): For cardbus bridges, read first 128
 672         bytes of config space to get full standard header.
 673
 674         * Makefile (CFLAGS): Removed "-Wno-unused".
 675
 676         * Started the "New Generation" branch and introduced the
 677         PCI library.
 678
 679         * lspci: Rewritten to use the library.
 680
 681 Tue Jan 19 22:24:08 1999  Martin Mares  <mj@albireo.ucw.cz>
 682
 683         * Released as version 1.10.
 684
 685 Mon Jan 18 08:51:17 1999  Martin Mares  <mj@albireo.ucw.cz>
 686
 687         * lspci.8, setpci.8: Miscellaneous fixes as suggested by
 688         Dag Wieers <dag@digibel.be>.
 689
 690 Sun Nov 29 20:05:56 1998  Martin Mares  <mj@albireo.ucw.cz>
 691
 692         * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
 693
 694 Sun Nov 22 10:49:56 1998  Martin Mares  <mj@albireo.ucw.cz>
 695
 696         * Makefile, pciutils.h: Moved pci.ids to /usr/share.
 697
 698         * Released as version 1.09.
 699
 700 Wed Nov 18 15:47:05 1998  Martin Mares  <mj@albireo.ucw.cz>
 701
 702         * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
 703         bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
 704
 705 Fri Oct 23 18:59:19 1998  Martin Mares  <mj@albireo.ucw.cz>
 706
 707         * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
 708
 709 Mon Oct 19 21:53:30 1998  Martin Mares  <mj@albireo.ucw.cz>
 710
 711         * Released as version 1.08.
 712
 713         * setpci.c: glibc 2.1.x already defines pread() and pwrite().
 714
 715         * lspci.8: Changed warning about lspci -xxx.
 716
 717         * lspci.c: Require "-xxx" for full configuration space dump, so that
 718         it's impossible to crash the machine by single typo.
 719
 720         * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
 721
 722 Wed Sep  9 12:03:24 1998  Martin Mares  <mj@albireo.ucw.cz>
 723
 724         * lspci.c (show_bases): Better displaying of unassigned and
 725         disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
 726         for an idea.
 727
 728 Wed Sep  2 10:58:01 1998  Martin Mares  <mj@albireo.ucw.cz>
 729
 730         * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
 731         (thanks to Geert Uytterhoeven for finding this out)
 732
 733 Fri Jul 17 10:43:30 1998  Martin Mares  <mj@albireo.ucw.cz>
 734
 735         * lspci.c (show_verbose): Print subsystem ID using the new resolver.
 736         (show_machine): Print subsystem ID.
 737
 738         * names.c: New name resolution engine supporting subsystem IDs.
 739
 740         * Released as version 1.07.
 741
 742 Wed Jul 15 15:37:21 1998  Martin Mares  <mj@albireo.ucw.cz>
 743
 744         * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
 745         (show_bases): Honor the `cnt' argument.
 746         (grow_tree): Parse CardBus headers in tree mode as well.
 747
 748         * pci.h: Updated CardBus header field description. I still don't
 749         have the CardBus standard available, but OZ6832 specs contain
 750         full description of all header fields supported by the chip.
 751
 752 Tue Jun  9 22:53:59 1998  Martin Mares  <mj@albireo.ucw.cz>
 753
 754         * Released as 1.06.
 755
 756         * names.c (parse_name_list): Killed an unused variable.
 757
 758         * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
 759         if they are not defined by glibc (needed for glibc built on older
 760         kernels). Ugly.
 761
 762         * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
 763
 764 Mon Jun  8 10:59:22 1998  Martin Mares  <mj@albireo.ucw.cz>
 765
 766         * Released as 1.05.
 767
 768         * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
 769         should be gone. Again thanks to Steve for bug report.
 770
 771         * filter.c (filter_parse_slot): Fixed ":x" type filters.
 772
 773         * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
 774         <steve@icarus.com> for reporting this.
 775
 776 Sun Jun  7 19:27:51 1998  Martin Mares  <mj@albireo.ucw.cz>
 777
 778         * lspci.c (main), setpci.c (main): Implemented "--version".
 779
 780         * Released as 1.04.
 781
 782         * pciutils.h (PCIUTILS_VERSION): Added version string.
 783
 784         * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
 785         Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
 786         for bug report.
 787
 788 Thu May 28 14:45:58 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 789
 790         * pci.ids: More updates from Jens Maurer.
 791
 792 Wed Apr 22 10:00:39 1998  Martin Mares  <mj@albireo.ucw.cz>
 793
 794         * pci.ids: Updates from Jens Maurer.
 795
 796 Sun Apr 19 11:14:25 1998  Martin Mares  <mj@albireo.ucw.cz>
 797
 798         * Released as 1.03.
 799
 800         * setpci.8: Written.
 801
 802         * setpci.c: Finished.
 803
 804         * lspci.c: Now able to fetch expansion ROM base from kernel device list
 805         and print it if not in buscentric mode.
 806
 807 Tue Mar 31 23:11:57 1998  Martin Mares  <mj@albireo.ucw.cz>
 808
 809         * setpci.c: Added.
 810
 811 Sun Mar 22 15:39:08 1998  Martin Mares  <mj@albireo.ucw.cz>
 812
 813         * lspci.8: Updated the documentation.
 814
 815         * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
 816
 817         * filter.c: Introduced new generic device filter.
 818
 819 Thu Mar 19 17:03:48 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 820
 821         * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
 822         of PCI-to-PCI bridges in the tree format.
 823
 824 Sun Feb 15 10:12:25 1998  Martin Mares  <mj@albireo.ucw.cz>
 825
 826         * lspci.c (show_machine): Added non-verbose mode of machine-readable
 827         dump.
 828
 829         * pci.ids: Updates from Jens Maurer.
 830
 831         * Released as version 1.02.
 832
 833 Thu Feb 12 16:53:28 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 834
 835         * lspci.c: Added a "-m" switch for dumping machine-readable
 836         configuration data (requested by Bjoern Kriews <bkr@cut.de>).
 837
 838 Mon Feb  9 13:17:43 1998  Martin Mares  <mj@albireo.ucw.cz>
 839
 840         * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
 841         if available. This should avoid all problems with official kernel
 842         not synchronized to newer PCI code in CVS -- standard distribution
 843         of pciutils now contains pci.h from current CVS kernel, pciutils
 844         in CVS contain no pci.h and use the correct kernel include.
 845
 846         * Makefile: Fixed installation path for man pages.
 847
 848 Sat Feb  7 15:15:46 1998  Martin Mares  <mj@albireo.ucw.cz>
 849
 850         * README: Updated.
 851
 852         * lspci.8: Created a man page.
 853
 854         * Releasing as version 1.0.
 855
 856 Tue Feb  3 20:56:00 1998  Martin Mares  <mj@albireo.ucw.cz>
 857
 858         * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
 859         to all the C sources. This should eliminate problems with 32-bit compilers
 860         on sparc64.
 861
 862         * lspci.c (show_verbose): Recognize CardBus bridge header type.
 863         (show_htype2): Stub routine.
 864         (scan_config): Write sensible error message if the kernel denies reading of
 865         upper part of the PCI config space.