ChangeLog

   1 2004-06-27  Martin Mares  <mj@ucw.cz>
   2
   3         * lspci.c (check_root): Gone. No explicit checks for root are needed,
   4         report correct errors reported by the libpci instead.
   5
   6         * lspci.c: Added dumping of the extended config space on "-xxxx".
   7         Better caching of config registers.
   8
   9         * setpci.c (main): Allow access to whole 4096 bytes of the config space.
  10
  11         * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
  12         just return the appropriate error code.
  13
  14         * lib: Added support for extended (4096-byte) configuration space,
  15         currently implemented only in Linux proc and sysfs access methods
  16         and of course in the dump reader.
  17
  18 2004-05-29  Martin Mares  <mj@ucw.cz>
  19
  20         * Released as 2.1.99-test5.
  21
  22         * lib/pci.h: Windows don't have the standard u_int* types.
  23
  24         * lib/internal.h: <sys/param.h> required on Windows for endianity
  25         macros.
  26
  27         * lib/i386-ports.c: Connected i386-io-windows.h.
  28
  29         * lspci.c (check_root): geteuid() is not available on Windows.
  30
  31         * lib/i386-io-windows.h: Added Windows port contributed by Alexander
  32         Stock <stock.alexander@gmx.de>.
  33
  34         * lib/configure: Hopefully fixed SunOS port broken by various
  35         changes to the configure script.
  36
  37         * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
  38
  39 2004-05-28  Martin Mares  <mj@ucw.cz>
  40
  41         * Released as 2.1.99-test4.
  42
  43         * lspci.c (show_verbose): Header type 1 is probably legal for all
  44         types of bridges, not only for PCI-to-PCI bridges.
  45
  46         * lspci.c (format_agp_rate): Write "x16", not "x@".
  47         (show_agp): rate[] could overflow.
  48         Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
  49
  50         * lspci.c (show_ht_*): Show HyperTransport capability with all its
  51         details. Once again code by Maciej simplified (i.e., possibly broken)
  52         by me.
  53
  54         * lib/header.h: Added declarations of HyperTransport capability.
  55         Again thanks to Maciej.
  56
  57         * lspci.c: Decode all bits of the secondary status word in type 1 headers.
  58         Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
  59
  60 2003-12-27  Martin Mares  <mj@ucw.cz>
  61
  62         * Released as 2.1.99-test3.
  63
  64         * lspci.man, setpci.man: Document domains and correct spelling.
  65
  66         * lib/dump.c (dump_init): Added ability to read domain numbers.
  67
  68         * lspci.c: Devices in domains different from 0 have their slot number
  69         printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
  70         as well.
  71
  72         * lib/filter.c: Slot filters understand domains.
  73
  74         * lib/generic.c: Mention the domain in slot numbers in all error messages.
  75
  76         * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
  77
  78         * lib/access.c (pci_get_dev): Added support for domains.
  79
  80         * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
  81         registers (or to be precise, leave it for the generic parts of the pcilib
  82         to do so) instead of reading them from the sysfs. It's faster this way.
  83
  84         * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
  85         variable. Better read it from the config registers (it's cached anyway).
  86
  87         * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
  88           lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
  89           Saves lots of unnecessary file accesses.
  90
  91         * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
  92         is not supported by all C libraries.
  93
  94         * Makefile: Always enter the lib directory (remember that we don't have
  95         full dependecies for the library in the top-level Makefile; hmmm, another
  96         thing to rewrite some day).
  97
  98         * lib/sysfs.c: Added Linux sysfs access method based on the patch
  99         written by Matthew Wilcox <willy@fc.hp.com>.
 100
 101         * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
 102
 103         * lib/pread.h: The hacks to support pread on various versions
 104         of Linux libc moved there.
 105
 106         * lib/proc.c (proc_setup): The return value of snprintf() varies
 107         between glibc versions, so we need to check both for a negative
 108         values and for too large values.
 109
 110         * Removed last few references to the "Linux PCI Utilities", the
 111         package is pretty cross-platform now :)
 112
 113 2003-12-27  Martin Mares  <mj@ucw.cz>
 114
 115         * Released as 2.1.99-test2.
 116
 117         * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
 118         release scripts insert the current version. "make release" is gone.
 119
 120         * maint/release, maint/release.pm: Added a new system of scripts for
 121         making releases including inter-version diffs etc.
 122
 123         * Makefile: Cleaned up.
 124
 125         * lib/fbsd-device.c: I patched another copy of this file by mistake,
 126         this time the version checks should be right.
 127
 128 2003-12-27  Martin Mares  <mj@ucw.cz>
 129
 130         * Released as 2.1.99-test1.
 131
 132         * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
 133         Remove shadows of the syscall access method which was never
 134         implemented.
 135
 136         * update-pciids.sh: Try to preserve permissions of the old file
 137         if chmod supports --reference. Should close Debian Bug #223740.
 138
 139         * lib/proc.c (proc_setup): Increased path name length limit to 1024.
 140         Thanks for Redhat and Mandrake for inspiration.
 141
 142         * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
 143         Grabbed from Redhat (Fedora) patches.
 144
 145 2003-12-27  Martin Mares  <mj@ucw.cz>
 146
 147         Merged bug fixes from Debian patches:
 148
 149         * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
 150
 151         * lspci.c (show_pcix_nobridge): Added a missing newline.
 152
 153         * lib/proc.c (proc_scan): When reading the header type, don't
 154         forget to clear the topmost bit indicating that the device has
 155         multiple functions.
 156
 157 2003-12-27  Martin Mares  <mj@ucw.cz>
 158
 159         Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
 160         for the patches:
 161
 162         * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
 163         * lib/fbsd-device.c: Select the right set of system includes according
 164         to __FreeBSD_version.
 165
 166 2003-12-27  Martin Mares  <mj@ucw.cz>
 167
 168         Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
 169         and cleaned up:
 170
 171         * lib/configure: Recognize SunOS.
 172         * lib/internal.h: Learn how to recognize byte order on SunOS.
 173         * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
 174         * lib/i386-io-linux.h: Linux specific part.
 175         * lib/i386-io-hurd.h: GNU/Hurd specific part.
 176         * lib/i386-io-sunos.h: SunOS specific part.
 177
 178 2003-12-26  Martin Mares  <mj@ucw.cz>
 179
 180         * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
 181
 182         * lib/pci.h: Types declared in <sys/types.h> should be usable on all
 183         platforms we currently support, so kill the forest of #ifdef's and
 184         use them in all cases.
 185
 186         * lib/pci.h: Use ULONG_MASK to decide whether we should use long
 187         or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
 188         Define format strings for addresses, port numbers and IRQ numbers
 189         directly in pci.h.
 190
 191         * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
 192
 193 2003-12-26  Marco Gerards  <metgerards@student.han.nl>
 194
 195         Added support for the GNU Hurd (cleaned up by Martin Mares):
 196
 197         * lib/configure [GNU]: Use the i386 ports for configuration access.
 198         * lib/i386-ports.c: Don't call iopl() on the Hurd.
 199         * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
 200         u8 to u32.
 201
 202 2003-12-26  Martin Mares  <mj@ucw.cz>
 203
 204         * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
 205         config_fetch() to ensure that the registers have been read. Thanks to
 206         Bill Wood <bill.wood@hp.com> for the patch.
 207
 208         * lspci.c: Ensure that failure of config_fetch() is handled correctly
 209         at all places.
 210
 211         * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
 212         Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
 213
 214         * setpci.c (main): Better error messages.
 215
 216         * setpci.c (ex_op): The demo mode should disable only writing, not reading.
 217
 218         * setpci.man: The documentation was inconsistent on what should -D do.
 219         Document the new behaviour.
 220
 221         * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
 222         the GCC specific __attribute__((noreturn)) and killed the hack with
 223         redefining __attribute__ on non-GCC compilers.
 224
 225         * Makefile: Added missing dependencies. Parallel builds work now.
 226         Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
 227         a different fix.
 228
 229         * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
 230         command every time $(MANDIR) is referenced.
 231
 232         * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
 233         a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
 234
 235         * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
 236         Reported by Gary Parnes <gary_parnes@terago.com>.
 237
 238         * Replaced obsolete syntax of __attribute__((unused)) in the middle of
 239         parameter declarations (which is no longer supported by GCC 3.1) by the
 240         current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
 241         for reporting this problem.
 242
 243         * Removed CVS $Id$ tags from all files.
 244
 245         * Makefile: Added some more warnings.
 246
 247         * setpci.c: Cleaned up mask/value code.
 248
 249 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
 250
 251         * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
 252
 253 2003-11-29  Martin Mares  <mj@ucw.cz>
 254
 255         * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
 256
 257 2003-01-04  Martin Mares  <mj@ucw.cz>
 258
 259         * Released as 2.1.11.
 260
 261         * Makefile: Changed configuration of installation directories --
 262         all paths are now set at the top of the Makefile instead of being
 263         scattered between the installation rules. The default installation
 264         now goes always to /usr/local regardless of the OS as most distributions
 265         already contain some version of pciutils and we don't want custom
 266         installations to interfere with the default ones.
 267
 268         * Makefile: Removed a couple of ancient install hacks: we no longer
 269         try to avoid overwriting a newer pci.ids file (users are now expected
 270         to use update-ids) and we don't try to remove /etc/pci.ids (a long time
 271         has passed since the last version which used it).
 272
 273         * Makefile: Paths to pci.ids in man pages automatically get the right path.
 274
 275         * Added the update-ids utility.
 276
 277         * lib: Removed partially implemented "syscall" access method which will
 278         probably never be needed.
 279
 280 2002-12-27  Martin Mares  <mj@ucw.cz>
 281
 282         * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
 283
 284         * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
 285         discontiguous numbering of functions. This is already present in the Linux
 286         kernel for several years, but I forgot to update pciutils as well.
 287
 288 2002-12-26  Martin Mares  <mj@ucw.cz>
 289
 290         * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
 291
 292         * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
 293         there is no reason to prefer the kernel version.
 294
 295         * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
 296
 297         * Added preliminary version of NetBSD support by Quentin Garnier
 298         <netbsd@quatriemek.com>.
 299
 300 2002-04-06  Martin Mares  <mj@ucw.cz>
 301
 302         * lspci.c: Mention "-xxx" in the help.
 303
 304 2002-03-30  Martin Mares  <mj@ucw.cz>
 305
 306         * Released as 2.1.10.
 307
 308         * Removed pci.ids from the CVS as they are now maintained separately.
 309         They are still included in the tarball, but if you are building pciutils
 310         from CVS sources or you want to get a newer ID file than the one distributed,
 311         just use "make update-ids" to download the most recent snapshot from
 312         pciids.sf.net.
 313
 314         * Makefile, README: Updated accordingly.
 315
 316         * Makefile: Added a couple of maintenance targets.
 317
 318         * maint/*: Maintainer's utilities now reside here (present only in CVS,
 319         not in the tarball).
 320
 321         * lib/names.c (parse_name_list): End-of-line comments are no longer
 322         supported. Hashes are now perfectly valid in all names and they start
 323         a comment only at the start of the line.
 324
 325 2002-03-26  Martin Mares  <mj@ucw.cz>
 326
 327         * README: Rewritten.
 328
 329         * Makefile: When the currently installed pci.ids file is newer than
 330         the version to be installed, don't overwrite it. Suggested by
 331         Jean Delvare <khali@linux-fr.org>.
 332
 333 2002-03-24  Martin Mares  <mj@ucw.cz>
 334
 335         * lspci.c (show_pcix_bridge): Added PCI-X capability display.
 336         Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
 337
 338         * lib/header.h: Added PCI-X stuff. Again by Jeff.
 339
 340         * Makefile (CFLAGS): -Werror is gone.
 341
 342         * lspci.c (format_agp_rate): Fixed AGP rate reporting.
 343
 344         * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
 345         function 7.
 346
 347         * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
 348         or device hexadecimally, don't confuse it with chip vendor/device ID.
 349         First reported by Marc Boucher <marc@mbsi.ca>.
 350
 351 2001-11-04  Martin Mares  <mj@ucw.cz>
 352
 353         * Released as 2.1.9.
 354
 355         * pci.ids: Synced with the PCI ID Repository at SourceForge
 356         (http://pciids.sourceforge.net/).
 357
 358 2000-08-25  Martin Mares  <mj@albireo.ucw.cz>
 359
 360         * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
 361
 362 2000-06-13  Martin Mares  <mj@albireo.ucw.cz>
 363
 364         * Makefile (uninstall): Fixed.
 365
 366         * pci.ids: ID updates.
 367
 368 2000-05-20  Martin Mares  <mj@albireo.ucw.cz>
 369
 370         * Released as 2.1.8.
 371
 372         * pci.ids: ID updates.
 373
 374         * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
 375
 376 2000-05-04  Martin Mares  <mj@albireo.ucw.cz>
 377
 378         * lspci.c (show_verbose): If the header type doesn't match device
 379         class, just print a warning and still use the header type, assuming
 380         bogus class info.
 381
 382 2000-05-01  Martin Mares  <mj@albireo.ucw.cz>
 383
 384         * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
 385
 386         * pci.ids: Updated Contemporary Control ARCnet card entries.
 387
 388         * pci.ids: Synchronized class list with latest PCI SIG documents.
 389
 390 2000-04-29  Martin Mares  <mj@albireo.ucw.cz>
 391
 392         * lib/names.c (pci_lookup_name): Fixed the cheat.
 393
 394         * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
 395
 396         * pci.ids: Various ID updates.
 397
 398 2000-04-21  Martin Mares  <mj@albireo.ucw.cz>
 399
 400         * Released as 2.1.7.
 401
 402         * pciutils.spec: Added German description.
 403
 404         * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
 405         are the same as device ID and just output subsystem name according to
 406         device name.
 407
 408         * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
 409
 410         * lib/pci.h: Added the correct typedefs for AIX.
 411
 412         * lib/generic.c (pci_generic_scan_bus): Export.
 413
 414         * lib/configure: Detect AIX. Use "echo '...\c'" instead of
 415         "echo -n" if the shell isn't bash.
 416
 417         * lspci.c: Avoid using alloca() if not compiled by GCC.
 418         (insert_dev): Avoid returning a void value.
 419
 420         * Makefile: Choose which install utility to use according to
 421         OS type. Also use `-o' instead of `-or' in find arguments.
 422         Part of the AIX port.
 423
 424         * lib/aix-device.c: Added AIX low-level interface. Contributed
 425         by Dave Johnson <ddj@brown.edu>, thanks a lot!
 426
 427         * pci.ids: Few new ID's.
 428
 429         * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
 430         when not compiled by GCC.
 431
 432 2000-04-17  Martin Mares  <mj@albireo.ucw.cz>
 433
 434         * Released as 2.1.6.
 435
 436         * pci.ids: Added a large batch of ID's contributed by Gunther
 437         Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
 438         list with the 2.3.99pre6 kernel.
 439
 440 Thu Mar  9 13:11:39 2000  Martin Mares  <mj@albireo.ucw.cz>
 441
 442         * lib/example.c: Added a simple example of how to use
 443         the library.
 444
 445         * lspci.man, setpci.man: Revealed --version. Well spotted
 446         by Adam Sulmicki.
 447
 448         * pci.ids: Added lots of new ID's and synced with 2.3.50.
 449
 450 Tue Feb 15 00:16:21 2000  Martin Mares  <mj@albireo.ucw.cz>
 451
 452         * Released as 2.1.5.
 453
 454         * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
 455         %{_mandir} to find the right location to install manual pages to.
 456
 457         * pci.ids: New ID's.
 458
 459         * setpci.c (main): Don't crash when `-s' or `-d' is given with
 460         no argument.
 461
 462 Mon Jan 24 20:04:11 2000  Andreas Jaeger  <aj@suse.de>
 463
 464         * lib/i386-ports.c: Include <asm/io.h> only on systems without
 465         glibc.
 466
 467 Mon Jan 24 11:24:43 2000  Martin Mares  <mj@albireo.ucw.cz>
 468
 469         * Makefile: Modified to work with the Linux FHS brain-damaged idea
 470         of putting man pages to /usr/share/man. Now we choose either /usr/man
 471         or /usr/share/man depending on which one exists.
 472
 473 Sun Jan 23 10:52:34 2000  Martin Mares  <mj@albireo.ucw.cz>
 474
 475         * pci.ids: Synced with Linux 2.3.40.
 476
 477         * Released as version 2.1.4.
 478
 479 Thu Jan 20 11:08:32 2000  Martin Mares  <mj@albireo.ucw.cz>
 480
 481         * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
 482
 483         * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
 484
 485         * lspci.c (format_agp_rate): Better formatting of AGP rates.
 486
 487         * pci.ids: New ID's.
 488
 489         * lib/configure: Added configuration for ia64 (the same as for Alpha).
 490         Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
 491
 492 Thu Jan 13 23:01:52 2000  Martin Mares  <mj@albireo.ucw.cz>
 493
 494         * Released as version 2.1.3.
 495
 496         * pci.ids: New ID's.
 497
 498         * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
 499
 500         * lib/access.c: Corrected order of access methods -- it's wonderful how
 501         long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
 502
 503 Sat Dec 11 23:34:48 1999  Martin Mares  <mj@albireo.ucw.cz>
 504
 505         * Released as version 2.1.2.
 506
 507         * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
 508
 509 Sat Dec  4 13:11:03 1999  Martin Mares  <mj@albireo.ucw.cz>
 510
 511         * Released as version 2.1.1.
 512
 513         * pci.ids: Several new ID's.
 514
 515         * setpci.c (exec_op): Don't forget to increment address after writing
 516         single value, so that `30.b=12,34,56,78' works as expected. Reported
 517         by Petr Soucek <petr@ryston.cz>.
 518
 519 Wed Nov  3 10:24:38 1999  Martin Mares  <mj@albireo.ucw.cz>
 520
 521         * lspci.c (show_terse): If prog-if is zero, but it's present in the
 522         ID list, show it.
 523
 524 Sat Oct 30 11:06:35 1999  Martin Mares  <mj@albireo.ucw.cz>
 525
 526         * Released as version 2.1.
 527
 528         * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
 529         lots of contributed entries.
 530
 531 Thu Oct 14 10:40:12 1999  Dave Jones    <dave@powertweak.com>
 532
 533         * pci.ids: Added lots of subsystem definitions.
 534
 535 Sat Oct  9 14:32:28 1999  Martin Mares  <mj@albireo.ucw.cz>
 536
 537         * setpci.man: Better example.
 538
 539         * lspci.c: Resolve prog-if names.
 540
 541         * lib/names.c: Adapted to new pci.ids syntax.
 542
 543         * pci.ids: Reorganized the pci.ids file. Subsystems are listed
 544         under devices, classes can optionally contain prog-if information.
 545         New ID's, as usually.
 546
 547 Wed Sep 22 09:45:24 1999  Martin Mares  <mj@albireo.ucw.cz>
 548
 549         * pci.ids: New ID's. As usually.
 550
 551         * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
 552         unless we're vvvery verbose.
 553
 554 Mon Sep 20 11:22:54 1999  Martin Mares  <mj@albireo.ucw.cz>
 555
 556         * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
 557
 558 Tue Sep 14 09:31:01 1999  Martin Mares  <mj@albireo.ucw.cz>
 559
 560         * pci.ids: New ID's. Again.
 561
 562 Thu Aug  5 17:45:42 1999  Martin Mares  <mj@albireo.ucw.cz>
 563
 564         * lspci.c (show_size): Don't show size if it's zero (usually
 565         due to bus-centric mode being enabled).
 566
 567 Tue Jul 20 13:25:09 1999  Martin Mares  <mj@albireo.ucw.cz>
 568
 569         * lib/pci.h: Types are OS dependent.
 570
 571         * lib/internal.h: Byte order hacks are OS dependent.
 572
 573         * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
 574
 575         * lib/Makefile, lib/access.c: Added fbsd-device target.
 576
 577         * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
 578         incorrectly set to device ID.
 579
 580         * README: Added a note that we support FreeBSD.
 581
 582         * Makefile (PREFIX, ROOT): Set it depending on the OS.
 583         (%.8): Grrr, BSD date is not able to convert date formats the same way
 584         as GNU date does. Use sed instead.
 585         (install): Use `-c' when calling install.
 586
 587         * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
 588         by Jari Kirma <kirma@cs.hut.fi>.
 589
 590         * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
 591         and pwrite only when we are certain it's safe (i.e., glibc 2.1
 592         on all architectures or any libc on a i386 where we really know
 593         how to use syscalls directly). In all other cases, emulate it
 594         with lseek/read/write.
 595
 596         * pci.ids: Some more IDs.
 597
 598 Mon Jul 19 14:10:36 1999  Martin Mares  <mj@albireo.ucw.cz>
 599
 600         * pci.ids: Added IDs of parallel port controller cards as sent
 601         by Tim Waugh <tim@cyberelk.demon.co.uk>.
 602
 603 Wed Jul  7 00:55:48 1999  Martin Mares  <mj@albireo.ucw.cz>
 604
 605         * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
 606
 607         * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
 608         HAVE_LONG_ADDRESS.
 609
 610         * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
 611         are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
 612         to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
 613         and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
 614         on Alpha.
 615
 616         * lspci.c (show_msi): Added dumping of the MSI capability.
 617         (show_slotid): The same for SlotID capability.
 618         (show_caps): Seperated capability dumping, because it should
 619         be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
 620         layout of htype2, so I'm a bit unsure about it wrt capabilities
 621         -- they at least have to live somewhere else since address 0x34
 622         is already defined differently in htype2.
 623
 624         * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
 625         (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
 626         (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
 627
 628         * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
 629         (required by the PCI 2.2 specs).
 630
 631 Mon Jul  5 12:45:19 1999  Martin Mares  <mj@albireo.ucw.cz>
 632
 633         * lspci.c (show_size): Added new function for dumping of region sizes.
 634         (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
 635         ROMs et cetera.
 636
 637         * lib/pci.h (struct pci_dev): known_fields moved to the public part
 638         of the structure.
 639
 640         * Added support for region sizes. Needs support in the kernel, because
 641         sizes have to be scanned before drivers initialize yourself. pci_fill_info()
 642         now returns a bitmask of what fields were really read.
 643
 644 Mon Jun 28 18:37:51 1999  Dave Jones    <dave@powertweak.com>
 645
 646         * Makefile:
 647           Added `uninstall' target - removes all traces of pciutils.
 648         * pci.ids:
 649           - Lots of cleanups in the ATI, S3, Adaptec vendors.
 650           - Changed Compaq QVision 1280/p definitions, as it's not possible
 651             to determine the revision from the device ID.
 652           - Same for the Tseng ET4000.
 653             The id's said I had a rev C, when it was actually a rev B.
 654           - Removed some unnecessary strings
 655             `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
 656             `Ethernet card'. This should be determined from config space.
 657           - Lots of other new vendors & devices
 658           - Other additional small cleanups.
 659
 660 Mon Jun 21 22:11:10 1999  Martin Mares  <mj@albireo.ucw.cz>
 661
 662         * lib/names.c (pci_lookup_name): When device ID lookup
 663         fails, return hexadecimal device ID instead of vendor ID.
 664         Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
 665         I've just extended the fix to subsystem ID's.
 666
 667 Thu Jun 17 19:48:21 1999  Martin Mares  <mj@albireo.ucw.cz>
 668
 669         * lspci.c (show_agp): Bug fix from Petr Vandrovec
 670         <vandrove@vc.cvut.cz>. The command register was displayed
 671         incorrectly.
 672
 673 Wed Jun  2 22:42:44 1999  Martin Mares  <mj@albireo.ucw.cz>
 674
 675         * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
 676         numbers if not supplied by the libc.
 677
 678 Wed May 19 13:24:39 1999  Martin Mares  <mj@albireo.ucw.cz>
 679
 680         * Released the whole package as version 2.0.
 681
 682 Fri May 14 22:42:02 1999  Martin Mares  <mj@albireo.ucw.cz>
 683
 684         * pci.ids: Added several new ID's contributed by people
 685         on the linux-pci list.
 686
 687 Mon Apr 19 15:21:08 1999  Jakub Jelinek  <jj@ultra.linux.cz>
 688
 689         * lspci.c: Display I/O addresses correctly on sparc64.
 690         * lib/header.h: Ditto.
 691
 692         * lib/configure: On sparc set HAVE_64BIT* as well, we want
 693         a binary which works on both 32bit and 64bit SPARCs.
 694
 695 Sun Apr 18 21:14:58 1999  Martin Mares  <mj@albireo.ucw.cz>
 696
 697         * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
 698         <mjacob@feral.com>.
 699
 700         * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
 701
 702 Sun Feb 28 22:26:21 1999  Martin Mares  <mj@albireo.ucw.cz>
 703
 704         * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
 705         as a multi-function device, because several single-function devices
 706         don't decode the function bits at all.
 707
 708 Sun Feb 14 23:48:22 1999  Martin Mares  <mj@albireo.ucw.cz>
 709
 710         * Makefile (install): Don't use "-o root -g root" for installation
 711         since it breaks on machines where programs are not installed by root.
 712         Reported by Richard Gooch <rgooch@atnf.csiro.au>
 713
 714 Tue Feb  9 15:54:39 1999  Martin Mares  <mj@albireo.ucw.cz>
 715
 716         * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
 717
 718         * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
 719         or 64-bit depending on CPU.
 720
 721         * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
 722         according to bus address width.
 723
 724 Thu Jan 28 20:54:16 1999  Martin Mares  <mj@albireo.ucw.cz>
 725
 726         * Released as 1.99.4.
 727
 728         * lspci.c: Capability list parser now recognizes both AGP
 729         registers and PCI Power Management registers (the latter
 730         is mainly guesswork based on DEC/Intel 21153 bridge specs
 731         since I don't have the PCI Power Management document).
 732
 733         * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
 734         by FLAG macro.
 735
 736         * lspci.c: Added bridge checks to bus mapping code.
 737
 738 Wed Jan 27 14:59:16 1999  Martin Mares  <mj@albireo.ucw.cz>
 739
 740         * lspci.c: Implemented bus mapping mode (-M).
 741
 742         * lspci.c (scan_devices): Split to scan_devices() and scan_device().
 743         (show): Split to show() and show_device().
 744
 745         * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
 746         set it to the real access method afterwards.
 747
 748 Mon Jan 25 23:46:13 1999  Martin Mares  <mj@albireo.ucw.cz>
 749
 750         * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
 751         don't check PCI_COMMAND for I/O and memory enables.
 752
 753 Mon Jan 25 21:28:49 1999  Martin Mares  <mj@albireo.ucw.cz>
 754
 755         * Makefile: Added target `release' which substitutes new version
 756         number to .spec, .lsm and README. Also rewrote target `dist'.
 757
 758         * Released as 1.99.3.
 759
 760 Sun Jan 24 22:10:36 1999  Martin Mares  <mj@albireo.ucw.cz>
 761
 762         * lib/header.h: Until kernel adopts new layout of PCI
 763         includes (i.e., separate declaration of header structure,
 764         functions and device IDs), which is not going to happen
 765         before 2.3, we'll use our own definiton of the header.
 766
 767         * lspci.c (show_verbose): Display `Cap' flag in device status.
 768
 769         * lspci.c (show_htype0): Display capability lists whereever
 770         available. The only capability name we recognize now is `AGP'.
 771         Unfortunately, capabilities are stored in device-dependent
 772         portion of the configuration space and are thus available
 773         only to root unless you read a dump.
 774
 775         * lspci.c (scan_devices): Use cache instead of buffering.
 776
 777         * lib/buffer.c: Removed (obsoleted by the cache).
 778
 779         * lib/access.c: Added general caching mechanism.
 780
 781 Sat Jan 23 21:30:54 1999  Martin Mares  <mj@albireo.ucw.cz>
 782
 783         * pci.ids: Added few devices.
 784
 785 Fri Jan 22 19:29:31 1999  Martin Mares  <mj@albireo.ucw.cz>
 786
 787         * Version string is now defined in top-level Makefile, exported
 788         to the configure script and also substituted to man pages.
 789
 790         * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
 791         (show_verbose): Rewrote interrupt display logic.
 792
 793         * lib/i386-ports.c: Include sys/io.h only on glibc systems.
 794
 795         * lib/configure: Rewrote detection of Linux versions. Now it
 796         works on 2.0 kernels (only with direct/dump access, of course).
 797
 798         * lib/internal.h: New bytesex macros using <asm/byteorder.h>
 799         whenever available.
 800
 801         * lib/proc.c (proc_read, proc_write): Distinguish between short
 802         read/write and real errors.
 803
 804         * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
 805         libpci respects buscentric mode automatically.
 806
 807         * lspci.c (show_hex_dump): For CardBus bridges, print out 128
 808         bytes of header (the whole standard part).
 809
 810         * common.c: pcilib options are now all uppercase. Also moved
 811         PCI access debugging option here.
 812
 813         * Released as 1.99.2.
 814
 815 Wed Jan 20 22:50:35 1999  Martin Mares  <mj@albireo.ucw.cz>
 816
 817         * Wrote configure script and rewrote Makefiles.
 818
 819         * Removed few unused variables.
 820
 821 Wed Jan 20 12:21:56 1999  Martin Mares  <mj@albireo.ucw.cz>
 822
 823         * common.c: Moved several functions used in both setpci and lspci
 824         here. This includes parsing of libpci-related options.
 825
 826         * More library tweaks.
 827
 828         * filter.c, names.c: Moved to library.
 829
 830         * setpci: Rewritten to use the library.
 831
 832         * Released as 1.99.1.
 833
 834 Tue Jan 19 23:00:12 1999  Martin Mares  <mj@albireo.ucw.cz>
 835
 836         * lspci.c (scan_devices): For cardbus bridges, read first 128
 837         bytes of config space to get full standard header.
 838
 839         * Makefile (CFLAGS): Removed "-Wno-unused".
 840
 841         * Started the "New Generation" branch and introduced the
 842         PCI library.
 843
 844         * lspci: Rewritten to use the library.
 845
 846 Tue Jan 19 22:24:08 1999  Martin Mares  <mj@albireo.ucw.cz>
 847
 848         * Released as version 1.10.
 849
 850 Mon Jan 18 08:51:17 1999  Martin Mares  <mj@albireo.ucw.cz>
 851
 852         * lspci.8, setpci.8: Miscellaneous fixes as suggested by
 853         Dag Wieers <dag@digibel.be>.
 854
 855 Sun Nov 29 20:05:56 1998  Martin Mares  <mj@albireo.ucw.cz>
 856
 857         * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
 858
 859 Sun Nov 22 10:49:56 1998  Martin Mares  <mj@albireo.ucw.cz>
 860
 861         * Makefile, pciutils.h: Moved pci.ids to /usr/share.
 862
 863         * Released as version 1.09.
 864
 865 Wed Nov 18 15:47:05 1998  Martin Mares  <mj@albireo.ucw.cz>
 866
 867         * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
 868         bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
 869
 870 Fri Oct 23 18:59:19 1998  Martin Mares  <mj@albireo.ucw.cz>
 871
 872         * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
 873
 874 Mon Oct 19 21:53:30 1998  Martin Mares  <mj@albireo.ucw.cz>
 875
 876         * Released as version 1.08.
 877
 878         * setpci.c: glibc 2.1.x already defines pread() and pwrite().
 879
 880         * lspci.8: Changed warning about lspci -xxx.
 881
 882         * lspci.c: Require "-xxx" for full configuration space dump, so that
 883         it's impossible to crash the machine by single typo.
 884
 885         * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
 886
 887 Wed Sep  9 12:03:24 1998  Martin Mares  <mj@albireo.ucw.cz>
 888
 889         * lspci.c (show_bases): Better displaying of unassigned and
 890         disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
 891         for an idea.
 892
 893 Wed Sep  2 10:58:01 1998  Martin Mares  <mj@albireo.ucw.cz>
 894
 895         * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
 896         (thanks to Geert Uytterhoeven for finding this out)
 897
 898 Fri Jul 17 10:43:30 1998  Martin Mares  <mj@albireo.ucw.cz>
 899
 900         * lspci.c (show_verbose): Print subsystem ID using the new resolver.
 901         (show_machine): Print subsystem ID.
 902
 903         * names.c: New name resolution engine supporting subsystem IDs.
 904
 905         * Released as version 1.07.
 906
 907 Wed Jul 15 15:37:21 1998  Martin Mares  <mj@albireo.ucw.cz>
 908
 909         * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
 910         (show_bases): Honor the `cnt' argument.
 911         (grow_tree): Parse CardBus headers in tree mode as well.
 912
 913         * pci.h: Updated CardBus header field description. I still don't
 914         have the CardBus standard available, but OZ6832 specs contain
 915         full description of all header fields supported by the chip.
 916
 917 Tue Jun  9 22:53:59 1998  Martin Mares  <mj@albireo.ucw.cz>
 918
 919         * Released as 1.06.
 920
 921         * names.c (parse_name_list): Killed an unused variable.
 922
 923         * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
 924         if they are not defined by glibc (needed for glibc built on older
 925         kernels). Ugly.
 926
 927         * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
 928
 929 Mon Jun  8 10:59:22 1998  Martin Mares  <mj@albireo.ucw.cz>
 930
 931         * Released as 1.05.
 932
 933         * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
 934         should be gone. Again thanks to Steve for bug report.
 935
 936         * filter.c (filter_parse_slot): Fixed ":x" type filters.
 937
 938         * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
 939         <steve@icarus.com> for reporting this.
 940
 941 Sun Jun  7 19:27:51 1998  Martin Mares  <mj@albireo.ucw.cz>
 942
 943         * lspci.c (main), setpci.c (main): Implemented "--version".
 944
 945         * Released as 1.04.
 946
 947         * pciutils.h (PCIUTILS_VERSION): Added version string.
 948
 949         * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
 950         Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
 951         for bug report.
 952
 953 Thu May 28 14:45:58 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 954
 955         * pci.ids: More updates from Jens Maurer.
 956
 957 Wed Apr 22 10:00:39 1998  Martin Mares  <mj@albireo.ucw.cz>
 958
 959         * pci.ids: Updates from Jens Maurer.
 960
 961 Sun Apr 19 11:14:25 1998  Martin Mares  <mj@albireo.ucw.cz>
 962
 963         * Released as 1.03.
 964
 965         * setpci.8: Written.
 966
 967         * setpci.c: Finished.
 968
 969         * lspci.c: Now able to fetch expansion ROM base from kernel device list
 970         and print it if not in buscentric mode.
 971
 972 Tue Mar 31 23:11:57 1998  Martin Mares  <mj@albireo.ucw.cz>
 973
 974         * setpci.c: Added.
 975
 976 Sun Mar 22 15:39:08 1998  Martin Mares  <mj@albireo.ucw.cz>
 977
 978         * lspci.8: Updated the documentation.
 979
 980         * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
 981
 982         * filter.c: Introduced new generic device filter.
 983
 984 Thu Mar 19 17:03:48 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 985
 986         * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
 987         of PCI-to-PCI bridges in the tree format.
 988
 989 Sun Feb 15 10:12:25 1998  Martin Mares  <mj@albireo.ucw.cz>
 990
 991         * lspci.c (show_machine): Added non-verbose mode of machine-readable
 992         dump.
 993
 994         * pci.ids: Updates from Jens Maurer.
 995
 996         * Released as version 1.02.
 997
 998 Thu Feb 12 16:53:28 1998  Martin Mares  <mj@lomikel.karlin.mff.cuni.cz>
 999
1000         * lspci.c: Added a "-m" switch for dumping machine-readable
1001         configuration data (requested by Bjoern Kriews <bkr@cut.de>).
1002
1003 Mon Feb  9 13:17:43 1998  Martin Mares  <mj@albireo.ucw.cz>
1004
1005         * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
1006         if available. This should avoid all problems with official kernel
1007         not synchronized to newer PCI code in CVS -- standard distribution
1008         of pciutils now contains pci.h from current CVS kernel, pciutils
1009         in CVS contain no pci.h and use the correct kernel include.
1010
1011         * Makefile: Fixed installation path for man pages.
1012
1013 Sat Feb  7 15:15:46 1998  Martin Mares  <mj@albireo.ucw.cz>
1014
1015         * README: Updated.
1016
1017         * lspci.8: Created a man page.
1018
1019         * Releasing as version 1.0.
1020
1021 Tue Feb  3 20:56:00 1998  Martin Mares  <mj@albireo.ucw.cz>
1022
1023         * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
1024         to all the C sources. This should eliminate problems with 32-bit compilers
1025         on sparc64.
1026
1027         * lspci.c (show_verbose): Recognize CardBus bridge header type.
1028         (show_htype2): Stub routine.
1029         (scan_config): Write sensible error message if the kernel denies reading of
1030         upper part of the PCI config space.