"linux-sparc" configuration.

[thirdparty/openssl.git] / INSTALL

 INSTALLATION ON THE UNIX PLATFORM
 ---------------------------------

 [See INSTALL.W32 for instructions for compiling OpenSSL on Windows systems,
  and INSTALL.VMS for installing on OpenVMS systems.]

 To install OpenSSL, you will need:

  * Perl 5
  * an ANSI C compiler
  * a supported Unix operating system

 Quick Start
 -----------

 If you want to just get on with it, do:

  $ ./config
  $ make
  $ make test
  $ make install

 [If any of these steps fails, see section Installation in Detail below.]

 This will build and install OpenSSL in the default location, which is (for
 historical reasons) /usr/local/ssl. If you want to install it anywhere else,
 run config like this:

  $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl


 Configuration Options
 ---------------------

 There are several options to ./config to customize the build:

  --prefix=DIR  Install in DIR/bin, DIR/lib, DIR/include/openssl.
                Configuration files used by OpenSSL will be in DIR/ssl
                or the directory specified by --openssldir.

  --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                the library files and binaries are also installed there.

  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
                librsaref.a is in the library search path).

  no-threads    Don't try to build with support for multi-threaded
                applications.

  threads       Build with support for multi-threaded applications.
                This will usually require additional system-dependent options!
                See "Note on multi-threading" below.

  no-asm        Do not use assembler code.

  386           Use the 80386 instruction set only (the default x86 code is
                more efficient, but requires at least a 486).

  no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                The crypto/<cipher> directory can be removed after running
                "make depend".

  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
                be passed through to the compiler to allow you to
                define preprocessor symbols, specify additional libraries,
                library directories or other compiler options.


 Installation in Detail
 ----------------------

 1a. Configure OpenSSL for your operation system automatically:

       $ ./config [options]

     This guesses at your operating system (and compiler, if necessary) and
     configures OpenSSL based on this guess. Run ./config -t to see
     if it guessed correctly. If it did not get it correct or you want to
     use a different compiler then go to step 1b. Otherwise go to step 2.

     On some systems, you can include debugging information as follows:

       $ ./config -d [options]

 1b. Configure OpenSSL for your operating system manually

     OpenSSL knows about a range of different operating system, hardware and
     compiler combinations. To see the ones it knows about, run

       $ ./Configure

     Pick a suitable name from the list that matches your system. For most
     operating systems there is a choice between using "cc" or "gcc".  When
     you have identified your system (and if necessary compiler) use this name
     as the argument to ./Configure. For example, a "linux-elf" user would
     run:

       $ ./Configure linux-elf [options]

     If your system is not available, you will have to edit the Configure
     program and add the correct configuration for your system. The
     generic configurations "cc" or "gcc" should usually work.

     Configure creates the file Makefile.ssl from Makefile.org and
     defines various macros in crypto/opensslconf.h (generated from
     crypto/opensslconf.h.in).

  2. Build OpenSSL by running:

       $ make

     This will build the OpenSSL libraries (libcrypto.a and libssl.a) and the
     OpenSSL binary ("openssl"). The libraries will be built in the top-level
     directory, and the binary will be in the "apps" directory.

     If "make" fails, please report the problem to <openssl-bugs@openssl.org>.
     Include the output of "./config -t" and the OpenSSL version
     number in your message.

     [If you encounter assembler error messages, try the "no-asm"
     configuration option as an immediate fix.  Note that on Solaris x86
     (not on Sparcs!) you may have to install the GNU assembler to use
     OpenSSL assembler code -- /usr/ccs/bin/as won't do.]

     Compiling parts of OpenSSL with gcc and others with the system
     compiler will result in unresolved symbols on some systems.

  3. After a successful build, the libraries should be tested. Run:

       $ make test

    If a test fails, try removing any compiler optimization flags from
    the CFLAGS line in Makefile.ssl and run "make clean; make". Please
    send a bug report to <openssl-bugs@openssl.org>, including the
    output of "openssl version -a" and of the failed test.

  4. If everything tests ok, install OpenSSL with

       $ make install

     This will create the installation directory (if it does not exist) and
     then the following subdirectories:

       certs           Initially empty, this is the default location
                       for certificate files.
       misc            Various scripts.
       private         Initially empty, this is the default location
                       for private key files.

     If you didn't chose a different installation prefix, the
     following additional subdirectories will be created:

       bin             Contains the openssl binary and a few other 
                       utility programs. 
       include/openssl Contains the header files needed if you want to
                       compile programs with libcrypto or libssl.
       lib             Contains the OpenSSL library files themselves.

     Package builders who want to configure the library for standard
     locations, but have the package installed somewhere else so that
     it can easily be packaged, can use

       $ make INSTALL_PREFIX=/tmp/package-root install

     (or specify "--install_prefix=/tmp/package-root" as a configure
     option).  The specified prefix will be prepended to all
     installation target filenames.


  NOTE: The header files used to reside directly in the include
  directory, but have now been moved to include/openssl so that
  OpenSSL can co-exist with other libraries which use some of the
  same filenames.  This means that applications that use OpenSSL
  should now use C preprocessor directives of the form

       #include <openssl/ssl.h>

  instead of "#include <ssl.h>", which was used with library versions
  up to OpenSSL 0.9.2b.

  If you install a new version of OpenSSL over an old library version,
  you should delete the old header files in the include directory.

  Compatibility issues:

  *  COMPILING existing applications

     To compile an application that uses old filenames -- e.g.
     "#include <ssl.h>" --, it will usually be enough to find
     the CFLAGS definition in the application's Makefile and
     add a C option such as

          -I/usr/local/ssl/include/openssl

     to it.

     But don't delete the existing -I option that points to
     the ..../include directory!  Otherwise, OpenSSL header files
     could not #include each other.

  *  WRITING applications

     To write an application that is able to handle both the new
     and the old directory layout, so that it can still be compiled
     with library versions up to OpenSSL 0.9.2b without bothering
     the user, you can proceed as follows:

     -  Always use the new filename of OpenSSL header files,
        e.g. #include <openssl/ssl.h>.

     -  Create a directory "incl" that contains only a symbolic
        link named "openssl", which points to the "include" directory
        of OpenSSL.
        For example, your application's Makefile might contain the
        following rule, if OPENSSLDIR is a pathname (absolute or
        relative) of the directory where OpenSSL resides:

        incl/openssl:
                -mkdir incl
                cd $(OPENSSLDIR) # Check whether the directory really exists
                -ln -s `cd $(OPENSSLDIR); pwd`/include incl/openssl

        You will have to add "incl/openssl" to the dependencies
        of those C files that include some OpenSSL header file.

     -  Add "-Iincl" to your CFLAGS.

     With these additions, the OpenSSL header files will be available
     under both name variants if an old library version is used:
     Your application can reach them under names like <openssl/foo.h>,
     while the header files still are able to #include each other
     with names of the form <foo.h>.


 Note on multi-threading
 -----------------------

 For some systems, the OpenSSL Configure script knows what compiler options
 are needed to generate a library that is suitable for multi-threaded
 applications.  On these systems, support for multi-threading is enabled
 by default; use the "no-threads" option to disable (this should never be
 necessary).

 On other systems, to enable support for multi-threading, you will have
 to specify at least two options: "threads", and a system-dependent option.
 (The latter is "-D_REENTRANT" on various systems.)  The default in this
 case, obviously, is not to include support for multi-threading (but
 you can still use "no-threads" to suppress an annoying warning message
 from the Configure script.)


--------------------------------------------------------------------------------
The orignal Unix build instructions from SSLeay follow. 
Note: some of this may be out of date and no longer applicable
--------------------------------------------------------------------------------

# When bringing the SSLeay distribution back from the evil intel world
# of Windows NT, do the following to make it nice again under unix :-)
# You don't normally need to run this.
sh util/fixNT.sh        # This only works for NT now - eay - 21-Jun-1996

# If you have perl, and it is not in /usr/local/bin, you can run
perl util/perlpath.pl /new/path
# and this will fix the paths in all the scripts.  DO NOT put
# /new/path/perl, just /new/path. The build
# environment always run scripts as 'perl perlscript.pl' but some of the
# 'applications' are easier to usr with the path fixed.

# Edit crypto/cryptlib.h, tools/c_rehash, and Makefile.ssl
# to set the install locations if you don't like
# the default location of /usr/local/ssl
# Do this by running
perl util/ssldir.pl /new/ssl/home
# if you have perl, or by hand if not.

# If things have been stuffed up with the sym links, run
make -f Makefile.ssl links
# This will re-populate lib/include with symlinks and for each
# directory, link Makefile to Makefile.ssl

# Setup the machine dependent stuff for the top level makefile
# and some select .h files
# If you don't have perl, this will bomb, in which case just edit the
# top level Makefile.ssl
./Configure 'system type'

# The 'Configure' command contains default configuration parameters
# for lots of machines.  Configure edits 5 lines in the top level Makefile
# It modifies the following values in the following files
Makefile.ssl            CC CFLAG EX_LIBS BN_MULW
crypto/des/des.h        DES_LONG
crypto/des/des_locl.h   DES_PTR
crypto/md2/md2.h        MD2_INT
crypto/rc4/rc4.h        RC4_INT
crypto/rc4/rc4_enc.c    RC4_INDEX
crypto/rc2/rc2.h        RC2_INT
crypto/bf/bf_locl.h     BF_INT
crypto/idea/idea.h      IDEA_INT
crypto/bn/bn.h          BN_LLONG (and defines one of SIXTY_FOUR_BIT,
                                  SIXTY_FOUR_BIT_LONG, THIRTY_TWO_BIT,
                                  SIXTEEN_BIT or EIGHT_BIT)
Please remember that all these files are actually copies of the file with
a .org extention.  So if you change crypto/des/des.h, the next time
you run Configure, it will be runover by a 'configured' version of
crypto/des/des.org.  So to make the changer the default, change the .org
files.  The reason these files have to be edited is because most of
these modifications change the size of fundamental data types.
While in theory this stuff is optional, it often makes a big
difference in performance and when using assember, it is importaint
for the 'Bignum bits' match those required by the assember code.
A warning for people using gcc with sparc cpu's.  Gcc needs the -mv8
flag to use the hardware multiply instruction which was not present in
earlier versions of the sparc CPU.  I define it by default.  If you
have an old sparc, and it crashes, try rebuilding with this flag
removed.  I am leaving this flag on by default because it makes
things run 4 times faster :-)

# clean out all the old stuff
make clean

# Do a make depend only if you have the makedepend command installed
# This is not needed but it does make things nice when developing.
make depend

# make should build everything
make

# fix up the demo certificate hash directory if it has been stuffed up.
make rehash

# test everything
make test

# install the lot
make install

# It is worth noting that all the applications are built into the one
# program, ssleay, which is then has links from the other programs
# names to it.
# The applicatons can be built by themselves, just don't define the
# 'MONOLITH' flag.  So to build the 'enc' program stand alone,
gcc -O2 -Iinclude apps/enc.c apps/apps.c libcrypto.a

# Other useful make options are
make makefile.one
# which generate a 'makefile.one' file which will build the complete
# SSLeay distribution with temp. files in './tmp' and 'installable' files
# in './out'

# Have a look at running
perl util/mk1mf.pl help
# this can be used to generate a single makefile and is about the only
# way to generate makefiles for windows.

# There is actually a final way of building SSLeay.
gcc -O2 -c -Icrypto -Iinclude crypto/crypto.c
gcc -O2 -c -Issl -Iinclude ssl/ssl.c
# and you now have the 2 libraries as single object files :-).
# If you want to use the assember code for your particular platform
# (DEC alpha/x86 are the main ones, the other assember is just the
# output from gcc) you will need to link the assember with the above generated
# object file and also do the above compile as
gcc -O2 -DBN_ASM -c -Icrypto -Iinclude crypto/crypto.c

This last option is probably the best way to go when porting to another
platform or building shared libraries.  It is not good for development so
I don't normally use it.

To build shared libararies under unix, have a look in shlib, basically 
you are on your own, but it is quite easy and all you have to do
is compile 2 (or 3) files.

For mult-threading, have a read of doc/threads.doc.  Again it is quite
easy and normally only requires some extra callbacks to be defined
by the application.
The examples for solaris and windows NT/95 are in the mt directory.

have fun

eric 25-Jun-1997

IRIX 5.x will build as a 32 bit system with mips1 assember.
IRIX 6.x will build as a 64 bit system with mips3 assember.  It conforms
to n32 standards. In theory you can compile the 64 bit assember under
IRIX 5.x but you will have to have the correct system software installed.