4 This document describes installation on all supported operating
5 systems (the Unix/Linux family (which includes Mac OS/X), OpenVMS,
8 To install OpenSSL, you will need:
10 * A make implementation
11 * Perl 5 with core modules (please read NOTES.PERL)
12 * The perl module Text::Template (please read NOTES.PERL)
14 * a development environment in the form of development libraries and C
16 * a supported operating system
18 For additional platform specific requirements, solutions to specific
19 issues and other details, please read one of these:
21 * NOTES.UNIX (any supported Unix like system)
23 * NOTES.WIN (any supported Windows)
24 * NOTES.DJGPP (DOS platform with DJGPP)
25 * NOTES.ANDROID (obviously Android [NDK])
27 Notational conventions in this document
28 ---------------------------------------
30 Throughout this document, we use the following conventions in command
33 $ command Any line starting with a dollar sign
34 ($) is a command line.
36 { word1 | word2 | word3 } This denotes a mandatory choice, to be
37 replaced with one of the given words.
38 A simple example would be this:
40 $ echo { FOO | BAR | COOKIE }
42 which is to be understood as one of
51 [ word1 | word2 | word3 ] Similar to { word1 | word2 | word3 }
52 except it's optional to give any of
53 those. In addition to the examples
54 above, this would also be valid:
58 {{ target }} This denotes a mandatory word or
59 sequence of words of some sort. A
60 simple example would be this:
64 which is to be understood to use the
65 command 'type' on some file name
66 determined by the user.
68 [[ options ]] Similar to {{ target }}, but is
71 Note that the notation assumes spaces around {, }, [, ], {{, }} and
72 [[, ]]. This is to differentiate from OpenVMS directory
73 specifications, which also use [ and ], but without spaces.
78 If you want to just get on with it, do:
80 on Unix (again, this includes Mac OS/X):
94 on Windows (only pick one of the targets for configuration):
96 $ perl Configure { VC-WIN32 | VC-WIN64A | VC-WIN64I | VC-CE }
101 If any of these steps fails, see section Installation in Detail below.
103 This will build and install OpenSSL in the default location, which is:
105 Unix: normal installation directories under /usr/local
106 OpenVMS: SYS$COMMON:[OPENSSL-'version'...], where 'version' is the
107 OpenSSL version number with underscores instead of periods.
108 Windows: C:\Program Files\OpenSSL or C:\Program Files (x86)\OpenSSL
110 If you want to install it anywhere else, run config like this:
114 $ ./config --prefix=/opt/openssl --openssldir=/usr/local/ssl
118 $ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL]
120 (Note: if you do add options to the configuration command, please make sure
121 you've read more than just this Quick Start, such as relevant NOTES.* files,
122 the options outline below, as configuration options may change the outcome
123 in otherwise unexpected ways)
126 Configuration Options
127 ---------------------
129 There are several options to ./config (or ./Configure) to customize
130 the build (note that for Windows, the defaults for --prefix and
131 --openssldir depend in what configuration is used and what Windows
132 implementation OpenSSL is built on. More notes on this in NOTES.WIN):
135 Don't build with support for deprecated APIs below the
136 specified version number. For example "--api=1.1.0" will
137 remove support for all APIS that were deprecated in OpenSSL
138 version 1.1.0 or below.
140 --cross-compile-prefix=PREFIX
141 The PREFIX to include in front of commands for your
142 toolchain. It's likely to have to end with dash, e.g.
143 a-b-c- would invoke GNU compiler as a-b-c-gcc, etc.
144 Unfortunately cross-compiling is too case-specific to
145 put together one-size-fits-all instructions. You might
146 have to pass more flags or set up environment variables
147 to actually make it work. Android and iOS cases are
148 discussed in corresponding Configurations/15-*.conf
149 files. But there are cases when this option alone is
150 sufficient. For example to build the mingw64 target on
151 Linux "--cross-compile-prefix=x86_64-w64-mingw32-"
152 works. Naturally provided that mingw packages are
153 installed. Today Debian and Ubuntu users have option to
154 install a number of prepackaged cross-compilers along
155 with corresponding run-time and development packages for
156 "alien" hardware. To give another example
157 "--cross-compile-prefix=mipsel-linux-gnu-" suffices
158 in such case. Needless to mention that you have to
159 invoke ./Configure, not ./config, and pass your target
160 name explicitly. Also, note that --openssldir refers
161 to target's file system, not one you are building on.
164 Build OpenSSL with debugging symbols and zero optimization
168 The name of the directory under the top of the installation
169 directory tree (see the --prefix option) where libraries will
170 be installed. By default this is "lib". Note that on Windows
171 only ".lib" files will be stored in this location. dll files
172 will always be installed to the "bin" directory.
175 Directory for OpenSSL configuration files, and also the
176 default certificate and key store. Defaults are:
179 Windows: C:\Program Files\Common Files\SSL
180 or C:\Program Files (x86)\Common Files\SSL
181 OpenVMS: SYS$COMMON:[OPENSSL-COMMON]
184 The top of the installation directory tree. Defaults are:
187 Windows: C:\Program Files\OpenSSL
188 or C:\Program Files (x86)\OpenSSL
189 OpenVMS: SYS$COMMON:[OPENSSL-'version']
192 Build OpenSSL without debugging symbols. This is the default.
195 This is a developer flag that switches on various compiler
196 options recommended for OpenSSL development. It only works
197 when using gcc or clang as the compiler. If you are
198 developing a patch for OpenSSL then it is recommended that
199 you use this option where possible.
201 --with-zlib-include=DIR
202 The directory for the location of the zlib include file. This
203 option is only necessary if enable-zlib (see below) is used
204 and the include file is not already on the system include
208 On Unix: this is the directory containing the zlib library.
209 If not provided the system library path will be used.
210 On Windows: this is the filename of the zlib library (with or
211 without a path). This flag must be provided if the
212 zlib-dynamic option is not also used. If zlib-dynamic is used
213 then this flag is optional and a default value ("ZLIB1") is
214 used if not provided.
215 On VMS: this is the filename of the zlib library (with or
216 without a path). This flag is optional and if not provided
217 then "GNV$LIBZSHR", "GNV$LIBZSHR32" or "GNV$LIBZSHR64" is
218 used by default depending on the pointer size chosen.
221 --with-rand-seed=seed1[,seed2,...]
222 A comma separated list of seeding methods which will be tried
223 by OpenSSL in order to obtain random input (a.k.a "entropy")
224 for seeding its cryptographically secure random number
225 generator (CSPRNG). The current seeding methods are:
227 os: Use a trusted operating system entropy source.
228 This is the default method if such an entropy
230 getrandom: Use the L<getrandom(2)> or equivalent system
232 devrandom: Use the the first device from the DEVRANDOM list
233 which can be opened to read random bytes. The
234 DEVRANDOM preprocessor constant expands to
235 "/dev/urandom","/dev/random","/dev/srandom" on
236 most unix-ish operating systems.
237 egd: Check for an entropy generating daemon.
238 rdcpu: Use the RDSEED or RDRAND command if provided by
240 librandom: Use librandom (not implemented yet).
241 none: Disable automatic seeding. This is the default
242 on some operating systems where no suitable
243 entropy source exists, or no support for it is
246 For more information, see the section 'Note on random number
247 generation' at the end of this document.
250 Don't build the AFALG engine. This option will be forced if
251 on a platform that does not support AFALG.
254 Build with the Address sanitiser. This is a developer option
255 only. It may not work on all platforms and should never be
256 used in production environments. It will only work when used
257 with gcc or clang and should be used in conjunction with the
261 Do not use assembler code. This should be viewed as
262 debugging/trouble-shooting option rather than production.
263 On some platforms a small amount of assembler code may
264 still be used even with this option.
267 Do not build support for async operations.
270 Don't automatically load all supported ciphers and digests.
271 Typically OpenSSL will make available all of its supported
272 ciphers and digests. For a statically linked application this
273 may be undesirable if small executable size is an objective.
274 This only affects libcrypto. Ciphers and digests will have to
275 be loaded manually using EVP_add_cipher() and
276 EVP_add_digest() if this option is used. This option will
277 force a non-shared build.
280 Don't automatically load all libcrypto/libssl error strings.
281 Typically OpenSSL will automatically load human readable
282 error strings. For a statically linked application this may
283 be undesirable if small executable size is an objective.
286 Don't automatically load the default openssl.cnf file.
287 Typically OpenSSL will automatically load a system config
288 file which configures default ssl options.
291 Don't build the CAPI engine. This option will be forced if
292 on a platform that does not support CAPI.
295 Don't build support for CMS features
298 Don't build support for SSL/TLS compression. If this option
299 is left enabled (the default), then compression will only
300 work if the zlib or zlib-dynamic options are also chosen.
303 Build support for debugging memory allocated via
304 OPENSSL_malloc() or OPENSSL_zalloc().
306 enable-crypto-mdebug-backtrace
307 As for crypto-mdebug, but additionally provide backtrace
308 information for allocated memory.
309 TO BE USED WITH CARE: this uses GNU C functionality, and
310 is therefore not usable for non-GNU config targets. If
311 your build complains about the use of '-rdynamic' or the
312 lack of header file execinfo.h, this option is not for you.
313 ALSO NOTE that even though execinfo.h is available on your
314 system (through Gnulib), the functions might just be stubs
318 Don't build support for Certificate Transparency.
321 Don't build with support for any deprecated APIs. This is the
322 same as using "--api" and supplying the latest version
326 Don't build support for datagram based BIOs. Selecting this
327 option will also force the disabling of DTLS.
330 Don't build support for loading Dynamic Shared Objects.
333 Don't build the dynamically loaded engines. This only has an
334 effect in a "shared" build
337 Don't build support for Elliptic Curves.
340 Don't build support for binary Elliptic Curves
342 enable-ec_nistp_64_gcc_128
343 Enable support for optimised implementations of some commonly
344 used NIST elliptic curves.
345 This is only supported on platforms:
346 - with little-endian storage of non-byte types
347 - that tolerate misaligned memory references
348 - where the compiler:
349 - supports the non-standard type __uint128_t
350 - defines the built-in macro __SIZEOF_INT128__
353 Build support for gathering entropy from EGD (Entropy
357 Don't build support for loading engines.
360 Don't compile in any error strings.
362 enable-external-tests
363 Enable building of integration with external test suites.
364 This is a developer option and may not work on all platforms.
365 The only supported external test suite at the current time is
366 the BoringSSL test suite. See the file test/README.external
370 Don't compile in filename and line number information (e.g.
371 for errors and memory allocation).
373 enable-fuzz-libfuzzer, enable-fuzz-afl
374 Build with support for fuzzing using either libfuzzer or AFL.
375 These are developer options only. They may not work on all
376 platforms and should never be used in production environments.
377 See the file fuzz/README.md for further details.
380 Don't build support for GOST based ciphersuites. Note that
381 if this feature is enabled then GOST ciphersuites are only
382 available if the GOST algorithms are also available through
383 loading an externally supplied engine.
386 Don't build the padlock engine.
389 Don't generate dependencies.
392 Don't build support for writing multiple records in one
393 go in libssl (Note: this is a different capability to the
394 pipelining functionality).
397 Don't build support for the NPN TLS extension.
400 Don't build support for OCSP.
403 Don't build with support for Position Independent Code.
406 Don't use POSIX IO capabilities.
409 Don't build support for Pre-Shared Key based ciphersuites.
412 Don't use hardware RDRAND capabilities.
415 Don't build support for RFC3779 ("X.509 Extensions for IP
416 Addresses and AS Identifiers")
419 Build support for SCTP
422 Do not create shared libraries, only static ones. See "Note
423 on shared libraries" below.
426 Don't build support for socket BIOs
429 Don't build support for SRP or SRP based ciphersuites.
432 Don't build SRTP support
435 Exclude SSE2 code paths from 32-bit x86 assembly modules.
436 Normally SSE2 extension is detected at run-time, but the
437 decision whether or not the machine code will be executed
438 is taken solely on CPU capability vector. This means that
439 if you happen to run OS kernel which does not support SSE2
440 extension on Intel P4 processor, then your application
441 might be exposed to "illegal instruction" exception.
442 There might be a way to enable support in kernel, e.g.
443 FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and
444 there is a way to disengage SSE2 code paths upon application
445 start-up, but if you aim for wider "audience" running
446 such kernel, consider no-sse2. Both the 386 and
447 no-asm options imply no-sse2.
450 Build with the SSL Trace capabilities (adds the "-trace"
451 option to s_client and s_server).
454 Don't build the statically linked engines. This only
455 has an impact when not built "shared".
458 Don't use anything from the C header file "stdio.h" that
459 makes use of the "FILE" type. Only libcrypto and libssl can
460 be built in this way. Using this option will suppress
461 building the command line applications. Additionally since
462 the OpenSSL tests also use the command line applications the
463 tests will also be skipped.
466 Don't build test programs or run any test.
469 Don't try to build with support for multi-threaded
473 Build with support for multi-threaded applications. Most
474 platforms will enable this by default. However if on a
475 platform where this is not the case then this will usually
476 require additional system-dependent options! See "Note on
477 multi-threading" below.
479 enable-tls13downgrade
480 TODO(TLS1.3): Make this enabled by default and remove the
481 option when TLSv1.3 is out of draft
482 TLSv1.3 offers a downgrade protection mechanism. This is
483 implemented but disabled by default. It should not typically
484 be enabled except for testing purposes. Otherwise this could
485 cause problems if a pre-RFC version of OpenSSL talks to an
486 RFC implementation (it will erroneously be detected as a
490 Don't build Time Stamping Authority support.
493 Build with the Undefined Behaviour sanitiser. This is a
494 developer option only. It may not work on all platforms and
495 should never be used in production environments. It will only
496 work when used with gcc or clang and should be used in
497 conjunction with the "-DPEDANTIC" option (or the
498 --strict-warnings option).
501 Don't build with the "UI" capability (i.e. the set of
502 features enabling text based prompts).
505 Enable additional unit test APIs. This should not typically
506 be used in production deployments.
508 enable-weak-ssl-ciphers
509 Build support for SSL/TLS ciphers that are considered "weak"
510 (e.g. RC4 based ciphersuites).
513 Build with support for zlib compression/decompression.
516 Like "zlib", but has OpenSSL load the zlib library
517 dynamically when needed. This is only supported on systems
518 where loading of shared libraries is supported.
521 In 32-bit x86 builds, when generating assembly modules,
522 use the 80386 instruction set only (the default x86 code
523 is more efficient, but requires at least a 486). Note:
524 This doesn't affect code generated by compiler, you're
525 likely to complement configuration command line with
526 suitable compiler-specific option.
529 Don't build support for negotiating the specified SSL/TLS
530 protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2,
531 tls1_3, dtls, dtls1 or dtls1_2). If "no-tls" is selected then
532 all of tls1, tls1_1, tls1_2 and tls1_3 are disabled.
533 Similarly "no-dtls" will disable dtls1 and dtls1_2. The
534 "no-ssl" option is synonymous with "no-ssl3". Note this only
535 affects version negotiation. OpenSSL will still provide the
536 methods for applications to explicitly select the individual
540 As for no-<prot> but in addition do not build the methods for
541 applications to explicitly select individual protocol
542 versions. Note that there is no "no-tls1_3-method" option
543 because there is no application method for TLSv1.3. Using
544 individual protocol methods directly is deprecated.
545 Applications should use TLS_method() instead.
548 Build with support for the specified algorithm, where <alg>
549 is one of: md2 or rc5.
552 Build without support for the specified algorithm, where
553 <alg> is one of: aria, bf, blake2, camellia, cast, chacha,
554 cmac, des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb,
555 poly1305, rc2, rc4, rmd160, scrypt, seed, siphash, sm2, sm3,
556 sm4 or whirlpool. The "ripemd" algorithm is deprecated and
557 if used is synonymous with rmd160.
559 -Dxxx, -Ixxx, -Wp, -lxxx, -Lxxx, -Wl, -rpath, -R, -framework, -static
560 These system specific options will be recognised and
561 passed through to the compiler to allow you to define
562 preprocessor symbols, specify additional libraries, library
563 directories or other compiler options. It might be worth
564 noting that some compilers generate code specifically for
565 processor the compiler currently executes on. This is not
566 necessarily what you might have in mind, since it might be
567 unsuitable for execution on other, typically older,
568 processor. Consult your compiler documentation.
570 Take note of the VAR=value documentation below and how
571 these flags interact with those variables.
574 Additional options that are not otherwise recognised are
575 passed through as they are to the compiler as well. Again,
576 consult your compiler documentation.
578 Take note of the VAR=value documentation below and how
579 these flags interact with those variables.
582 Assignment of environment variable for Configure. These
583 work just like normal environment variable assignments,
584 but are supported on all platforms and are confined to
585 the configuration scripts only. These assignments override
586 the corresponding value in the inherited environment, if
589 The following variables are used as "make variables" and
590 can be used as an alternative to giving preprocessor,
591 compiler and linker options directly as configuration.
592 The following variables are supported:
594 AR The static library archiver.
595 ARFLAGS Flags for the static library archiver.
596 AS The assembler compiler.
597 ASFLAGS Flags for the assembler compiler.
599 CFLAGS Flags for the C compiler.
600 CXX The C++ compiler.
601 CXXFLAGS Flags for the C++ compiler.
602 CPP The C/C++ preprocessor.
603 CPPFLAGS Flags for the C/C++ preprocessor.
604 CPPDEFINES List of CPP macro definitions, separated
605 by a platform specific character (':' or
606 space for Unix, ';' for Windows, ',' for
607 VMS). This can be used instead of using
608 -D (or what corresponds to that on your
609 compiler) in CPPFLAGS.
610 CPPINCLUDES List of CPP inclusion directories, separated
611 the same way as for CPPDEFINES. This can
612 be used instead of -I (or what corresponds
613 to that on your compiler) in CPPFLAGS.
614 HASHBANGPERL Perl invocation to be inserted after '#!'
615 in public perl scripts (only relevant on
617 LD The program linker (not used on Unix, $(CC)
619 LDFLAGS Flags for the shared library, DSO and
621 LDLIBS Extra libraries to use when linking.
622 Takes the form of a space separated list
623 of library specifications on Unix and
624 Windows, and as a comma separated list of
626 RANLIB The library archive indexer.
627 RC The Windows resources manipulator.
628 RCFLAGS Flags for the Windows reources manipulator.
629 RM The command to remove files and directories.
631 These cannot be mixed with compiling / linking flags given
632 on the command line. In other words, something like this
635 ./config -DFOO CPPFLAGS=-DBAR -DCOOKIE
637 Backward compatibility note:
639 To be compatible with older configuration scripts, the
640 environment variables are ignored if compiling / linking
641 flags are given on the command line, except for these:
643 AR, CC, CXX, CROSS_COMPILE, HASHBANGPERL, PERL, RANLIB, RC
646 For example, the following command will not see -DBAR:
648 CPPFLAGS=-DBAR ./config -DCOOKIE
650 However, the following will see both set variables:
652 CC=gcc CROSS_COMPILE=x86_64-w64-mingw32- \
657 Reconfigure from earlier data. This fetches the previous
658 command line options and environment from data saved in
659 "configdata.pm", and runs the configuration process again,
660 using these options and environment.
661 Note: NO other option is permitted together with "reconf".
662 This means that you also MUST use "./Configure" (or
663 what corresponds to that on non-Unix platforms) directly
664 to invoke this option.
665 Note: The original configuration saves away values for ALL
666 environment variables that were used, and if they weren't
667 defined, they are still saved away with information that
668 they weren't originally defined. This information takes
669 precedence over environment variables that are defined
672 Displaying configuration data
673 -----------------------------
675 The configuration script itself will say very little, and finishes by
676 creating "configdata.pm". This perl module can be loaded by other scripts
677 to find all the configuration data, and it can also be used as a script to
678 display all sorts of configuration data in a human readable form.
680 For more information, please do:
682 $ ./configdata.pm --help # Unix
686 $ perl configdata.pm --help # Windows and VMS
688 Installation in Detail
689 ----------------------
691 1a. Configure OpenSSL for your operation system automatically:
693 NOTE: This is not available on Windows.
695 $ ./config [[ options ]] # Unix
699 $ @config [[ options ]] ! OpenVMS
701 For the remainder of this text, the Unix form will be used in all
702 examples, please use the appropriate form for your platform.
704 This guesses at your operating system (and compiler, if necessary) and
705 configures OpenSSL based on this guess. Run ./config -t to see
706 if it guessed correctly. If you want to use a different compiler, you
707 are cross-compiling for another platform, or the ./config guess was
708 wrong for other reasons, go to step 1b. Otherwise go to step 2.
710 On some systems, you can include debugging information as follows:
712 $ ./config -d [[ options ]]
714 1b. Configure OpenSSL for your operating system manually
716 OpenSSL knows about a range of different operating system, hardware and
717 compiler combinations. To see the ones it knows about, run
723 $ perl Configure # All other platforms
725 For the remainder of this text, the Unix form will be used in all
726 examples, please use the appropriate form for your platform.
728 Pick a suitable name from the list that matches your system. For most
729 operating systems there is a choice between using "cc" or "gcc". When
730 you have identified your system (and if necessary compiler) use this name
731 as the argument to Configure. For example, a "linux-elf" user would
734 $ ./Configure linux-elf [[ options ]]
736 If your system isn't listed, you will have to create a configuration
737 file named Configurations/{{ something }}.conf and add the correct
738 configuration for your system. See the available configs as examples
739 and read Configurations/README and Configurations/README.design for
742 The generic configurations "cc" or "gcc" should usually work on 32 bit
745 Configure creates a build file ("Makefile" on Unix, "makefile" on Windows
746 and "descrip.mms" on OpenVMS) from a suitable template in Configurations,
747 and defines various macros in include/openssl/opensslconf.h (generated from
748 include/openssl/opensslconf.h.in).
750 1c. Configure OpenSSL for building outside of the source tree.
752 OpenSSL can be configured to build in a build directory separate from
753 the directory with the source code. It's done by placing yourself in
754 some other directory and invoking the configuration commands from
759 $ mkdir /var/tmp/openssl-build
760 $ cd /var/tmp/openssl-build
761 $ /PATH/TO/OPENSSL/SOURCE/config [[ options ]]
765 $ /PATH/TO/OPENSSL/SOURCE/Configure {{ target }} [[ options ]]
769 $ set default sys$login:
770 $ create/dir [.tmp.openssl-build]
771 $ set default [.tmp.openssl-build]
772 $ @[PATH.TO.OPENSSL.SOURCE]config [[ options ]]
776 $ @[PATH.TO.OPENSSL.SOURCE]Configure {{ target }} [[ options ]]
781 $ mkdir \temp-openssl
783 $ perl d:\PATH\TO\OPENSSL\SOURCE\Configure {{ target }} [[ options ]]
785 Paths can be relative just as well as absolute. Configure will
786 do its best to translate them to relative paths whenever possible.
788 2. Build OpenSSL by running:
791 $ mms ! (or mmk) OpenVMS
794 This will build the OpenSSL libraries (libcrypto.a and libssl.a on
795 Unix, corresponding on other platforms) and the OpenSSL binary
796 ("openssl"). The libraries will be built in the top-level directory,
797 and the binary will be in the "apps" subdirectory.
801 If the build fails, look at the output. There may be reasons
802 for the failure that aren't problems in OpenSSL itself (like
803 missing standard headers).
805 If the build succeeded previously, but fails after a source or
806 configuration change, it might be helpful to clean the build tree
807 before attempting another build. Use this command:
810 $ mms clean ! (or mmk) OpenVMS
811 $ nmake clean # Windows
813 Assembler error messages can sometimes be sidestepped by using the
814 "no-asm" configuration option.
816 Compiling parts of OpenSSL with gcc and others with the system
817 compiler will result in unresolved symbols on some systems.
819 If you are still having problems you can get help by sending an email
820 to the openssl-users email list (see
821 https://www.openssl.org/community/mailinglists.html for details). If
822 it is a bug with OpenSSL itself, please open an issue on GitHub, at
823 https://github.com/openssl/openssl/issues. Please review the existing
824 ones first; maybe the bug was already reported or has already been
827 3. After a successful build, the libraries should be tested. Run:
831 $ nmake test # Windows
833 NOTE: you MUST run the tests from an unprivileged account (or
834 disable your privileges temporarily if your platform allows it).
836 If some tests fail, look at the output. There may be reasons for
837 the failure that isn't a problem in OpenSSL itself (like a
838 malfunction with Perl). You may want increased verbosity, that
839 can be accomplished like this:
841 $ make VERBOSE=1 test # Unix
843 $ mms /macro=(VERBOSE=1) test ! OpenVMS
845 $ nmake VERBOSE=1 test # Windows
847 If you want to run just one or a few specific tests, you can use
848 the make variable TESTS to specify them, like this:
850 $ make TESTS='test_rsa test_dsa' test # Unix
851 $ mms/macro="TESTS=test_rsa test_dsa" test ! OpenVMS
852 $ nmake TESTS='test_rsa test_dsa' test # Windows
854 And of course, you can combine (Unix example shown):
856 $ make VERBOSE=1 TESTS='test_rsa test_dsa' test
858 You can find the list of available tests like this:
860 $ make list-tests # Unix
861 $ mms list-tests ! OpenVMS
862 $ nmake list-tests # Windows
864 Have a look at the manual for the perl module Test::Harness to
865 see what other HARNESS_* variables there are.
867 If you find a problem with OpenSSL itself, try removing any
868 compiler optimization flags from the CFLAGS line in Makefile and
869 run "make clean; make" or corresponding.
871 To report a bug please open an issue on GitHub, at
872 https://github.com/openssl/openssl/issues.
874 For more details on how the make variables TESTS can be used,
875 see section TESTS in Detail below.
877 4. If everything tests ok, install OpenSSL with
879 $ make install # Unix
880 $ mms install ! OpenVMS
881 $ nmake install # Windows
883 This will install all the software components in this directory
884 tree under PREFIX (the directory given with --prefix or its
889 bin/ Contains the openssl binary and a few other
892 Contains the header files needed if you want
893 to build your own programs that use libcrypto
895 lib Contains the OpenSSL library files.
896 lib/engines Contains the OpenSSL dynamically loadable engines.
898 share/man/man1 Contains the OpenSSL command line man-pages.
899 share/man/man3 Contains the OpenSSL library calls man-pages.
900 share/man/man5 Contains the OpenSSL configuration format man-pages.
901 share/man/man7 Contains the OpenSSL other misc man-pages.
903 share/doc/openssl/html/man1
904 share/doc/openssl/html/man3
905 share/doc/openssl/html/man5
906 share/doc/openssl/html/man7
907 Contains the HTML rendition of the man-pages.
909 OpenVMS ('arch' is replaced with the architecture name, "Alpha"
910 or "ia64", 'sover' is replaced with the shared library version
911 (0101 for 1.1), and 'pz' is replaced with the pointer size
912 OpenSSL was built with):
914 [.EXE.'arch'] Contains the openssl binary.
915 [.EXE] Contains a few utility scripts.
917 Contains the header files needed if you want
918 to build your own programs that use libcrypto
920 [.LIB.'arch'] Contains the OpenSSL library files.
921 [.ENGINES'sover''pz'.'arch']
922 Contains the OpenSSL dynamically loadable engines.
923 [.SYS$STARTUP] Contains startup, login and shutdown scripts.
924 These define appropriate logical names and
926 [.SYSTEST] Contains the installation verification procedure.
927 [.HTML] Contains the HTML rendition of the manual pages.
930 Additionally, install will add the following directories under
931 OPENSSLDIR (the directory given with --openssldir or its default)
934 certs Initially empty, this is the default location
935 for certificate files.
936 private Initially empty, this is the default location
937 for private key files.
938 misc Various scripts.
940 Package builders who want to configure the library for standard
941 locations, but have the package installed somewhere else so that
942 it can easily be packaged, can use
944 $ make DESTDIR=/tmp/package-root install # Unix
945 $ mms/macro="DESTDIR=TMP:[PACKAGE-ROOT]" install ! OpenVMS
947 The specified destination directory will be prepended to all
948 installation target paths.
950 Compatibility issues with previous OpenSSL versions:
952 * COMPILING existing applications
954 OpenSSL 1.1.0 hides a number of structures that were previously
955 open. This includes all internal libssl structures and a number
956 of EVP types. Accessor functions have been added to allow
957 controlled access to the structures' data.
959 This means that some software needs to be rewritten to adapt to
960 the new ways of doing things. This often amounts to allocating
961 an instance of a structure explicitly where you could previously
962 allocate them on the stack as automatic variables, and using the
963 provided accessor functions where you would previously access a
964 structure's field directly.
966 Some APIs have changed as well. However, older APIs have been
967 preserved when possible.
969 Environment Variables
970 ---------------------
972 A number of environment variables can be used to provide additional control
973 over the build process. Typically these should be defined prior to running
974 config or Configure. Not all environment variables are relevant to all
978 The name of the ar executable to use.
981 Use a different build file name than the platform default
982 ("Makefile" on Unixly platforms, "makefile" on native Windows,
983 "descrip.mms" on OpenVMS). This requires that there is a
984 corresponding build file template. See Configurations/README
985 for further information.
988 The compiler to use. Configure will attempt to pick a default
989 compiler for your platform but this choice can be overridden
990 using this variable. Set it to the compiler executable you wish
991 to use, e.g. "gcc" or "clang".
994 This environment variable has the same meaning as for the
995 "--cross-compile-prefix" Configure flag described above. If both
996 are set then the Configure flag takes precedence.
999 The name of the nm executable to use.
1001 OPENSSL_LOCAL_CONFIG_DIR
1002 OpenSSL comes with a database of information about how it
1003 should be built on different platforms as well as build file
1004 templates for those platforms. The database is comprised of
1005 ".conf" files in the Configurations directory. The build
1006 file templates reside there as well as ".tmpl" files. See the
1007 file Configurations/README for further information about the
1008 format of ".conf" files as well as information on the ".tmpl"
1010 In addition to the standard ".conf" and ".tmpl" files, it is
1011 possible to create your own ".conf" and ".tmpl" files and store
1012 them locally, outside the OpenSSL source tree. This environment
1013 variable can be set to the directory where these files are held
1014 and will be considered by Configure before it looks in the
1015 standard directories.
1018 The name of the Perl executable to use when building OpenSSL.
1019 This variable is used in config script only. Configure on the
1020 other hand imposes the interpreter by which it itself was
1021 executed on the whole build procedure.
1024 The command string for the Perl executable to insert in the
1025 #! line of perl scripts that will be publically installed.
1026 Default: /usr/bin/env perl
1027 Note: the value of this variable is added to the same scripts
1028 on all platforms, but it's only relevant on Unix-like platforms.
1031 The name of the rc executable to use. The default will be as
1032 defined for the target platform in the ".conf" file. If not
1033 defined then "windres" will be used. The WINDRES environment
1034 variable is synonymous to this. If both are defined then RC
1038 The name of the ranlib executable to use.
1046 The Configure script generates a Makefile in a format relevant to the specific
1047 platform. The Makefiles provide a number of targets that can be used. Not all
1048 targets may be available on all platforms. Only the most common targets are
1049 described here. Examine the Makefiles themselves for the full list.
1052 The default target to build all the software components.
1055 Remove all build artefacts and return the directory to a "clean"
1059 Rebuild the dependencies in the Makefiles. This is a legacy
1060 option that no longer needs to be used in OpenSSL 1.1.0.
1063 Install all OpenSSL components.
1066 Only install the OpenSSL software components.
1069 Only install the OpenSSL documentation components.
1072 Only install the OpenSSL man pages (Unix only).
1075 Only install the OpenSSL html documentation.
1078 Prints a list of all the self test names.
1081 Build and run the OpenSSL self tests.
1084 Uninstall all OpenSSL components.
1088 Re-run the configuration process, as exactly as the last time
1092 This is a developer option. If you are developing a patch for
1093 OpenSSL you may need to use this if you want to update
1094 automatically generated files; add new error codes or add new
1095 (or change the visibility of) public API functions. (Unix only).
1100 The make variable TESTS supports a versatile set of space separated tokens
1101 with which you can specify a set of tests to be performed. With a "current
1102 set of tests" in mind, initially being empty, here are the possible tokens:
1104 alltests The current set of tests becomes the whole set of available
1105 tests (as listed when you do 'make list-tests' or similar).
1106 xxx Adds the test 'xxx' to the current set of tests.
1107 -xxx Removes 'xxx' from the current set of tests. If this is the
1108 first token in the list, the current set of tests is first
1109 assigned the whole set of available tests, effectively making
1110 this token equivalent to TESTS="alltests -xxx".
1111 nn Adds the test group 'nn' (which is a number) to the current
1113 -nn Removes the test group 'nn' from the current set of tests.
1114 If this is the first token in the list, the current set of
1115 tests is first assigned the whole set of available tests,
1116 effectively making this token equivalent to
1117 TESTS="alltests -xxx".
1119 Also, all tokens except for "alltests" may have wildcards, such as *.
1120 (on Unix and Windows, BSD style wildcards are supported, while on VMS,
1121 it's VMS style wildcards)
1123 Example: All tests except for the fuzz tests:
1125 $ make TESTS=-test_fuzz test
1127 or (if you want to be explicit)
1129 $ make TESTS='alltests -test_fuzz' test
1131 Example: All tests that have a name starting with "test_ssl" but not those
1132 starting with "test_ssl_":
1134 $ make TESTS='test_ssl* -test_ssl_*' test
1136 Example: Only test group 10:
1140 Example: All tests except the slow group (group 99):
1144 Example: All tests in test groups 80 to 99 except for tests in group 90:
1146 $ make TESTS='[89]? -90'
1148 Note on multi-threading
1149 -----------------------
1151 For some systems, the OpenSSL Configure script knows what compiler options
1152 are needed to generate a library that is suitable for multi-threaded
1153 applications. On these systems, support for multi-threading is enabled
1154 by default; use the "no-threads" option to disable (this should never be
1157 On other systems, to enable support for multi-threading, you will have
1158 to specify at least two options: "threads", and a system-dependent option.
1159 (The latter is "-D_REENTRANT" on various systems.) The default in this
1160 case, obviously, is not to include support for multi-threading (but
1161 you can still use "no-threads" to suppress an annoying warning message
1162 from the Configure script.)
1164 OpenSSL provides built-in support for two threading models: pthreads (found on
1165 most UNIX/Linux systems), and Windows threads. No other threading models are
1166 supported. If your platform does not provide pthreads or Windows threads then
1167 you should Configure with the "no-threads" option.
1169 Notes on shared libraries
1170 -------------------------
1172 For most systems the OpenSSL Configure script knows what is needed to
1173 build shared libraries for libcrypto and libssl. On these systems
1174 the shared libraries will be created by default. This can be suppressed and
1175 only static libraries created by using the "no-shared" option. On systems
1176 where OpenSSL does not know how to build shared libraries the "no-shared"
1177 option will be forced and only static libraries will be created.
1179 Shared libraries are named a little differently on different platforms.
1180 One way or another, they all have the major OpenSSL version number as
1181 part of the file name, i.e. for OpenSSL 1.1.x, 1.1 is somehow part of
1184 On most POSIXly platforms, shared libraries are named libcrypto.so.1.1
1187 on Cygwin, shared libraries are named cygcrypto-1.1.dll and cygssl-1.1.dll
1188 with import libraries libcrypto.dll.a and libssl.dll.a.
1190 On Windows build with MSVC or using MingW, shared libraries are named
1191 libcrypto-1_1.dll and libssl-1_1.dll for 32-bit Windows, libcrypto-1_1-x64.dll
1192 and libssl-1_1-x64.dll for 64-bit x86_64 Windows, and libcrypto-1_1-ia64.dll
1193 and libssl-1_1-ia64.dll for IA64 Windows. With MSVC, the import libraries
1194 are named libcrypto.lib and libssl.lib, while with MingW, they are named
1195 libcrypto.dll.a and libssl.dll.a.
1197 On VMS, shareable images (VMS speak for shared libraries) are named
1198 ossl$libcrypto0101_shr.exe and ossl$libssl0101_shr.exe. However, when
1199 OpenSSL is specifically built for 32-bit pointers, the shareable images
1200 are named ossl$libcrypto0101_shr32.exe and ossl$libssl0101_shr32.exe
1201 instead, and when built for 64-bit pointers, they are named
1202 ossl$libcrypto0101_shr64.exe and ossl$libssl0101_shr64.exe.
1204 Note on random number generation
1205 --------------------------------
1207 Availability of cryptographically secure random numbers is required for
1208 secret key generation. OpenSSL provides several options to seed the
1209 internal CSPRNG. If not properly seeded, the internal CSPRNG will refuse
1210 to deliver random bytes and a "PRNG not seeded error" will occur.
1212 The seeding method can be configured using the --with-rand-seed option,
1213 which can be used to specify a comma separated list of seed methods.
1214 However in most cases OpenSSL will choose a suitable default method,
1215 so it is not necessary to explicitely provide this option. Note also
1216 that not all methods are available on all platforms.
1218 I) On operating systems which provide a suitable randomness source (in
1219 form of a system call or system device), OpenSSL will use the optimal
1220 available method to seed the CSPRNG from the operating system's
1221 randomness sources. This corresponds to the option --with-rand-seed=os.
1223 II) On systems without such a suitable randomness source, automatic seeding
1224 and reseeding is disabled (--with-rand-seed=none) and it may be necessary
1225 to install additional support software to obtain a random seed and reseed
1226 the CSPRNG manually. Please check out the manual pages for RAND_add(),
1227 RAND_bytes(), RAND_egd(), and the FAQ for more information.
projects / thirdparty / openssl.git / blob