2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
5 * This package is an SSL implementation written
6 * by Eric Young (eay@cryptsoft.com).
7 * The implementation was written so as to conform with Netscapes SSL.
9 * This library is free for commercial and non-commercial use as long as
10 * the following conditions are aheared to. The following conditions
11 * apply to all code found in this distribution, be it the RC4, RSA,
12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
13 * included with this distribution is covered by the same copyright terms
14 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
16 * Copyright remains Eric Young's, and as such any Copyright notices in
17 * the code are not to be removed.
18 * If this package is used in a product, Eric Young should be given attribution
19 * as the author of the parts of the library used.
20 * This can be in the form of a textual message at program startup or
21 * in documentation (online or textual) provided with the package.
23 * Redistribution and use in source and binary forms, with or without
24 * modification, are permitted provided that the following conditions
26 * 1. Redistributions of source code must retain the copyright
27 * notice, this list of conditions and the following disclaimer.
28 * 2. Redistributions in binary form must reproduce the above copyright
29 * notice, this list of conditions and the following disclaimer in the
30 * documentation and/or other materials provided with the distribution.
31 * 3. All advertising materials mentioning features or use of this software
32 * must display the following acknowledgement:
33 * "This product includes cryptographic software written by
34 * Eric Young (eay@cryptsoft.com)"
35 * The word 'cryptographic' can be left out if the rouines from the library
36 * being used are not cryptographic related :-).
37 * 4. If you include any Windows specific code (or a derivative thereof) from
38 * the apps directory (application code) you must include an acknowledgement:
39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
53 * The licence and distribution terms for any publically available version or
54 * derivative of this code cannot be changed. i.e. this code cannot simply be
55 * copied and put under another distribution licence
56 * [including the GNU Public Licence.]
58 /* ====================================================================
59 * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
61 * Redistribution and use in source and binary forms, with or without
62 * modification, are permitted provided that the following conditions
65 * 1. Redistributions of source code must retain the above copyright
66 * notice, this list of conditions and the following disclaimer.
68 * 2. Redistributions in binary form must reproduce the above copyright
69 * notice, this list of conditions and the following disclaimer in
70 * the documentation and/or other materials provided with the
73 * 3. All advertising materials mentioning features or use of this
74 * software must display the following acknowledgment:
75 * "This product includes software developed by the OpenSSL Project
76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
79 * endorse or promote products derived from this software without
80 * prior written permission. For written permission, please contact
81 * openssl-core@openssl.org.
83 * 5. Products derived from this software may not be called "OpenSSL"
84 * nor may "OpenSSL" appear in their names without prior written
85 * permission of the OpenSSL Project.
87 * 6. Redistributions of any form whatsoever must retain the following
89 * "This product includes software developed by the OpenSSL Project
90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
103 * OF THE POSSIBILITY OF SUCH DAMAGE.
104 * ====================================================================
106 * This product includes cryptographic software written by Eric Young
107 * (eay@cryptsoft.com). This product includes software written by Tim
108 * Hudson (tjh@cryptsoft.com).
111 /* ====================================================================
112 * Copyright 2005 Nokia. All rights reserved.
114 * The portions of the attached software ("Contribution") is developed by
115 * Nokia Corporation and is licensed pursuant to the OpenSSL open source
118 * The Contribution, originally written by Mika Kousa and Pasi Eronen of
119 * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
120 * support (see RFC 4279) to OpenSSL.
122 * No patent licenses or other rights except those expressly stated in
123 * the OpenSSL open source license shall be deemed granted or received
124 * expressly, by implication, estoppel, or otherwise.
126 * No assurances are provided by Nokia that the Contribution does not
127 * infringe the patent or other intellectual property rights of any third
128 * party or that the license provides you with all the necessary rights
129 * to make use of the Contribution.
131 * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
132 * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
133 * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
134 * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
143 #include <openssl/e_os2.h>
144 #ifdef OPENSSL_NO_STDIO
148 /* With IPv6, it looks like Digital has mixed up the proper order of
149 recursive header file inclusion, resulting in the compiler complaining
150 that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
151 is needed to have fileno() declared correctly... So let's define u_int */
152 #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
154 typedef unsigned int u_int
;
159 #include <openssl/x509.h>
160 #include <openssl/ssl.h>
161 #include <openssl/err.h>
162 #include <openssl/pem.h>
163 #include <openssl/rand.h>
164 #include <openssl/ocsp.h>
165 #include <openssl/bn.h>
166 #ifndef OPENSSL_NO_SRP
167 #include <openssl/srp.h>
170 #include "timeouts.h"
172 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
173 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
177 #if defined(OPENSSL_SYS_BEOS_R5)
182 #define PROG s_client_main
184 /*#define SSL_HOST_NAME "www.netscape.com" */
185 /*#define SSL_HOST_NAME "193.118.187.102" */
186 #define SSL_HOST_NAME "localhost"
188 /*#define TEST_CERT "client.pem" */ /* no default cert. */
191 #define BUFSIZZ 1024*8
193 extern int verify_depth
;
194 extern int verify_error
;
195 extern int verify_return_error
;
200 static int c_Pause
=0;
201 static int c_debug
=0;
202 #ifndef OPENSSL_NO_TLSEXT
203 static int c_tlsextdebug
=0;
204 static int c_status_req
=0;
207 static int c_showcerts
=0;
209 static char *keymatexportlabel
=NULL
;
210 static int keymatexportlen
=20;
212 static void sc_usage(void);
213 static void print_stuff(BIO
*berr
,SSL
*con
,int full
);
214 #ifndef OPENSSL_NO_TLSEXT
215 static int ocsp_resp_cb(SSL
*s
, void *arg
);
217 static BIO
*bio_c_out
=NULL
;
218 static int c_quiet
=0;
219 static int c_ign_eof
=0;
221 #ifndef OPENSSL_NO_PSK
222 /* Default PSK identity and key */
223 static char *psk_identity
="Client_identity";
224 /*char *psk_key=NULL; by default PSK is not used */
226 static unsigned int psk_client_cb(SSL
*ssl
, const char *hint
, char *identity
,
227 unsigned int max_identity_len
, unsigned char *psk
,
228 unsigned int max_psk_len
)
230 unsigned int psk_len
= 0;
235 BIO_printf(bio_c_out
, "psk_client_cb\n");
238 /* no ServerKeyExchange message*/
240 BIO_printf(bio_c_out
,"NULL received PSK identity hint, continuing anyway\n");
243 BIO_printf(bio_c_out
, "Received PSK identity hint '%s'\n", hint
);
245 /* lookup PSK identity and PSK key based on the given identity hint here */
246 ret
= BIO_snprintf(identity
, max_identity_len
, "%s", psk_identity
);
247 if (ret
< 0 || (unsigned int)ret
> max_identity_len
)
250 BIO_printf(bio_c_out
, "created identity '%s' len=%d\n", identity
, ret
);
251 ret
=BN_hex2bn(&bn
, psk_key
);
254 BIO_printf(bio_err
,"Could not convert PSK key '%s' to BIGNUM\n", psk_key
);
260 if ((unsigned int)BN_num_bytes(bn
) > max_psk_len
)
262 BIO_printf(bio_err
,"psk buffer of callback is too small (%d) for key (%d)\n",
263 max_psk_len
, BN_num_bytes(bn
));
268 psk_len
=BN_bn2bin(bn
, psk
);
274 BIO_printf(bio_c_out
, "created PSK len=%d\n", psk_len
);
279 BIO_printf(bio_err
, "Error in PSK client callback\n");
284 static void sc_usage(void)
286 BIO_printf(bio_err
,"usage: s_client args\n");
287 BIO_printf(bio_err
,"\n");
288 BIO_printf(bio_err
," -host host - use -connect instead\n");
289 BIO_printf(bio_err
," -port port - use -connect instead\n");
290 BIO_printf(bio_err
," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME
,PORT_STR
);
292 BIO_printf(bio_err
," -verify arg - turn on peer certificate verification\n");
293 BIO_printf(bio_err
," -verify_return_error - return verification errors\n");
294 BIO_printf(bio_err
," -cert arg - certificate file to use, PEM format assumed\n");
295 BIO_printf(bio_err
," -certform arg - certificate format (PEM or DER) PEM default\n");
296 BIO_printf(bio_err
," -key arg - Private key file to use, in cert file if\n");
297 BIO_printf(bio_err
," not specified but cert file is.\n");
298 BIO_printf(bio_err
," -keyform arg - key format (PEM or DER) PEM default\n");
299 BIO_printf(bio_err
," -pass arg - private key file pass phrase source\n");
300 BIO_printf(bio_err
," -CApath arg - PEM format directory of CA's\n");
301 BIO_printf(bio_err
," -CAfile arg - PEM format file of CA's\n");
302 BIO_printf(bio_err
," -reconnect - Drop and re-make the connection with the same Session-ID\n");
303 BIO_printf(bio_err
," -pause - sleep(1) after each read(2) and write(2) system call\n");
304 BIO_printf(bio_err
," -prexit - print session information even on connection failure\n");
305 BIO_printf(bio_err
," -showcerts - show all certificates in the chain\n");
306 BIO_printf(bio_err
," -debug - extra output\n");
308 BIO_printf(bio_err
," -wdebug - WATT-32 tcp debugging\n");
310 BIO_printf(bio_err
," -msg - Show protocol messages\n");
311 BIO_printf(bio_err
," -nbio_test - more ssl protocol testing\n");
312 BIO_printf(bio_err
," -state - print the 'ssl' states\n");
314 BIO_printf(bio_err
," -nbio - Run with non-blocking IO\n");
316 BIO_printf(bio_err
," -crlf - convert LF from terminal into CRLF\n");
317 BIO_printf(bio_err
," -quiet - no s_client output\n");
318 BIO_printf(bio_err
," -ign_eof - ignore input eof (default when -quiet)\n");
319 BIO_printf(bio_err
," -no_ign_eof - don't ignore input eof\n");
320 #ifndef OPENSSL_NO_PSK
321 BIO_printf(bio_err
," -psk_identity arg - PSK identity\n");
322 BIO_printf(bio_err
," -psk arg - PSK in hex (without 0x)\n");
323 # ifndef OPENSSL_NO_JPAKE
324 BIO_printf(bio_err
," -jpake arg - JPAKE secret to use\n");
327 #ifndef OPENSSL_NO_SRP
328 BIO_printf(bio_err
," -srpuser user - SRP authentification for 'user'\n");
329 BIO_printf(bio_err
," -srppass arg - password for 'user'\n");
330 BIO_printf(bio_err
," -srp_lateuser - SRP username into second ClientHello message\n");
331 BIO_printf(bio_err
," -srp_moregroups - Tolerate other than the known g N values.\n");
332 BIO_printf(bio_err
," -srp_strength int - minimal length in bits for N (default %d).\n",SRP_MINIMAL_N
);
334 BIO_printf(bio_err
," -ssl2 - just use SSLv2\n");
335 #ifndef OPENSSL_NO_SSL3_METHOD
336 BIO_printf(bio_err
," -ssl3 - just use SSLv3\n");
338 BIO_printf(bio_err
," -tls1_2 - just use TLSv1.2\n");
339 BIO_printf(bio_err
," -tls1_1 - just use TLSv1.1\n");
340 BIO_printf(bio_err
," -tls1 - just use TLSv1\n");
341 BIO_printf(bio_err
," -dtls1 - just use DTLSv1\n");
342 BIO_printf(bio_err
," -fallback_scsv - send TLS_FALLBACK_SCSV\n");
343 BIO_printf(bio_err
," -mtu - set the link layer MTU\n");
344 BIO_printf(bio_err
," -no_tls1_2/-no_tls1_1/-no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
345 BIO_printf(bio_err
," -bugs - Switch on all SSL implementation bug workarounds\n");
346 BIO_printf(bio_err
," -serverpref - Use server's cipher preferences (only SSLv2)\n");
347 BIO_printf(bio_err
," -cipher - preferred cipher to use, use the 'openssl ciphers'\n");
348 BIO_printf(bio_err
," command to see what is available\n");
349 BIO_printf(bio_err
," -starttls prot - use the STARTTLS command before starting TLS\n");
350 BIO_printf(bio_err
," for those protocols that support it, where\n");
351 BIO_printf(bio_err
," 'prot' defines which one to assume. Currently,\n");
352 BIO_printf(bio_err
," only \"smtp\", \"pop3\", \"imap\", \"ftp\" and \"xmpp\"\n");
353 BIO_printf(bio_err
," are supported.\n");
354 #ifndef OPENSSL_NO_ENGINE
355 BIO_printf(bio_err
," -engine id - Initialise and use the specified engine\n");
357 BIO_printf(bio_err
," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR
, LIST_SEPARATOR_CHAR
);
358 BIO_printf(bio_err
," -sess_out arg - file to write SSL session to\n");
359 BIO_printf(bio_err
," -sess_in arg - file to read SSL session from\n");
360 #ifndef OPENSSL_NO_TLSEXT
361 BIO_printf(bio_err
," -servername host - Set TLS extension servername in ClientHello\n");
362 BIO_printf(bio_err
," -tlsextdebug - hex dump of all TLS extensions received\n");
363 BIO_printf(bio_err
," -status - request certificate status from server\n");
364 BIO_printf(bio_err
," -no_ticket - disable use of RFC4507bis session tickets\n");
365 # ifndef OPENSSL_NO_NEXTPROTONEG
366 BIO_printf(bio_err
," -nextprotoneg arg - enable NPN extension, considering named protocols supported (comma-separated list)\n");
369 BIO_printf(bio_err
," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n");
370 #ifndef OPENSSL_NO_SRTP
371 BIO_printf(bio_err
," -use_srtp profiles - Offer SRTP key management with a colon-separated profile list\n");
373 BIO_printf(bio_err
," -keymatexport label - Export keying material using label\n");
374 BIO_printf(bio_err
," -keymatexportlen len - Export len bytes of keying material (default 20)\n");
377 #ifndef OPENSSL_NO_TLSEXT
379 /* This is a context that we pass to callbacks */
380 typedef struct tlsextctx_st
{
386 static int MS_CALLBACK
ssl_servername_cb(SSL
*s
, int *ad
, void *arg
)
388 tlsextctx
* p
= (tlsextctx
*) arg
;
389 const char * hn
= SSL_get_servername(s
, TLSEXT_NAMETYPE_host_name
);
390 if (SSL_get_servername_type(s
) != -1)
391 p
->ack
= !SSL_session_reused(s
) && hn
!= NULL
;
393 BIO_printf(bio_err
,"Can't use SSL_get_servername\n");
395 return SSL_TLSEXT_ERR_OK
;
398 #ifndef OPENSSL_NO_SRP
400 /* This is a context that we pass to all callbacks */
401 typedef struct srp_arg_st
405 int msg
; /* copy from c_msg */
406 int debug
; /* copy from c_debug */
407 int amp
; /* allow more groups */
408 int strength
/* minimal size for N */ ;
411 #define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
413 static int srp_Verify_N_and_g(BIGNUM
*N
, BIGNUM
*g
)
415 BN_CTX
*bn_ctx
= BN_CTX_new();
416 BIGNUM
*p
= BN_new();
417 BIGNUM
*r
= BN_new();
419 g
!= NULL
&& N
!= NULL
&& bn_ctx
!= NULL
&& BN_is_odd(N
) &&
420 BN_is_prime_ex(N
, SRP_NUMBER_ITERATIONS_FOR_PRIME
, bn_ctx
, NULL
) &&
421 p
!= NULL
&& BN_rshift1(p
, N
) &&
424 BN_is_prime_ex(p
, SRP_NUMBER_ITERATIONS_FOR_PRIME
, bn_ctx
, NULL
) &&
427 /* verify g^((N-1)/2) == -1 (mod N) */
428 BN_mod_exp(r
, g
, p
, N
, bn_ctx
) &&
442 * This callback is used here for two purposes:
443 * - extended debugging
444 * - making some primality tests for unknown groups
445 * The callback is only called for a non default group.
447 * An application does not need the call back at all if
448 * only the stanard groups are used. In real life situations,
449 * client and server already share well known groups,
450 * thus there is no need to verify them.
451 * Furthermore, in case that a server actually proposes a group that
452 * is not one of those defined in RFC 5054, it is more appropriate
453 * to add the group to a static list and then compare since
454 * primality tests are rather cpu consuming.
457 static int MS_CALLBACK
ssl_srp_verify_param_cb(SSL
*s
, void *arg
)
459 SRP_ARG
*srp_arg
= (SRP_ARG
*)arg
;
460 BIGNUM
*N
= NULL
, *g
= NULL
;
461 if (!(N
= SSL_get_srp_N(s
)) || !(g
= SSL_get_srp_g(s
)))
463 if (srp_arg
->debug
|| srp_arg
->msg
|| srp_arg
->amp
== 1)
465 BIO_printf(bio_err
, "SRP parameters:\n");
466 BIO_printf(bio_err
,"\tN="); BN_print(bio_err
,N
);
467 BIO_printf(bio_err
,"\n\tg="); BN_print(bio_err
,g
);
468 BIO_printf(bio_err
,"\n");
471 if (SRP_check_known_gN_param(g
,N
))
474 if (srp_arg
->amp
== 1)
477 BIO_printf(bio_err
, "SRP param N and g are not known params, going to check deeper.\n");
479 /* The srp_moregroups is a real debugging feature.
480 Implementors should rather add the value to the known ones.
481 The minimal size has already been tested.
483 if (BN_num_bits(g
) <= BN_BITS
&& srp_Verify_N_and_g(N
,g
))
486 BIO_printf(bio_err
, "SRP param N and g rejected.\n");
490 #define PWD_STRLEN 1024
492 static char * MS_CALLBACK
ssl_give_srp_client_pwd_cb(SSL
*s
, void *arg
)
494 SRP_ARG
*srp_arg
= (SRP_ARG
*)arg
;
495 char *pass
= (char *)OPENSSL_malloc(PWD_STRLEN
+1);
499 cb_tmp
.password
= (char *)srp_arg
->srppassin
;
500 cb_tmp
.prompt_info
= "SRP user";
501 if ((l
= password_callback(pass
, PWD_STRLEN
, 0, &cb_tmp
))<0)
503 BIO_printf (bio_err
, "Can't read Password\n");
513 #ifndef OPENSSL_NO_SRTP
514 char *srtp_profiles
= NULL
;
517 # ifndef OPENSSL_NO_NEXTPROTONEG
518 /* This the context that we pass to next_proto_cb */
519 typedef struct tlsextnextprotoctx_st
{
523 } tlsextnextprotoctx
;
525 static tlsextnextprotoctx next_proto
;
527 static int next_proto_cb(SSL
*s
, unsigned char **out
, unsigned char *outlen
, const unsigned char *in
, unsigned int inlen
, void *arg
)
529 tlsextnextprotoctx
*ctx
= arg
;
533 /* We can assume that |in| is syntactically valid. */
535 BIO_printf(bio_c_out
, "Protocols advertised by server: ");
536 for (i
= 0; i
< inlen
; )
539 BIO_write(bio_c_out
, ", ", 2);
540 BIO_write(bio_c_out
, &in
[i
+ 1], in
[i
]);
543 BIO_write(bio_c_out
, "\n", 1);
546 ctx
->status
= SSL_select_next_proto(out
, outlen
, in
, inlen
, ctx
->data
, ctx
->len
);
547 return SSL_TLSEXT_ERR_OK
;
549 # endif /* ndef OPENSSL_NO_NEXTPROTONEG */
562 int MAIN(int, char **);
564 int MAIN(int argc
, char **argv
)
566 unsigned int off
=0, clr
=0;
568 #ifndef OPENSSL_NO_KRB5
571 int s
,k
,width
,state
=0;
572 char *cbuf
=NULL
,*sbuf
=NULL
,*mbuf
=NULL
;
573 int cbuf_len
,cbuf_off
;
574 int sbuf_len
,sbuf_off
;
575 fd_set readfds
,writefds
;
578 char *host
=SSL_HOST_NAME
;
579 char *cert_file
=NULL
,*key_file
=NULL
;
580 int cert_format
= FORMAT_PEM
, key_format
= FORMAT_PEM
;
581 char *passarg
= NULL
, *pass
= NULL
;
583 EVP_PKEY
*key
= NULL
;
584 char *CApath
=NULL
,*CAfile
=NULL
,*cipher
=NULL
;
585 int reconnect
=0,badop
=0,verify
=SSL_VERIFY_NONE
,bugs
=0;
587 int write_tty
,read_tty
,write_ssl
,read_ssl
,tty_on
,ssl_pending
;
589 int ret
=1,in_init
=1,i
,nbio_test
=0;
590 int starttls_proto
= PROTO_OFF
;
592 X509_VERIFY_PARAM
*vpm
= NULL
;
594 const SSL_METHOD
*meth
=NULL
;
595 int socket_type
=SOCK_STREAM
;
599 struct timeval timeout
, *timeoutp
;
600 #ifndef OPENSSL_NO_ENGINE
601 char *engine_id
=NULL
;
602 char *ssl_client_engine_id
=NULL
;
603 ENGINE
*ssl_client_engine
=NULL
;
606 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
608 #if defined(OPENSSL_SYS_BEOS_R5)
612 #ifndef OPENSSL_NO_TLSEXT
613 char *servername
= NULL
;
614 tlsextctx tlsextcbp
=
616 # ifndef OPENSSL_NO_NEXTPROTONEG
617 const char *next_proto_neg_in
= NULL
;
620 char *sess_in
= NULL
;
621 char *sess_out
= NULL
;
622 struct sockaddr peer
;
623 int peerlen
= sizeof(peer
);
624 int fallback_scsv
= 0;
625 int enable_timeouts
= 0 ;
627 #ifndef OPENSSL_NO_JPAKE
628 char *jpake_secret
= NULL
;
630 #ifndef OPENSSL_NO_SRP
631 char * srppass
= NULL
;
632 int srp_lateuser
= 0;
633 SRP_ARG srp_arg
= {NULL
,NULL
,0,0,0,1024};
636 meth
=SSLv23_client_method();
647 bio_err
=BIO_new_fp(stderr
,BIO_NOCLOSE
);
649 if (!load_config(bio_err
, NULL
))
652 if ( ((cbuf
=OPENSSL_malloc(BUFSIZZ
)) == NULL
) ||
653 ((sbuf
=OPENSSL_malloc(BUFSIZZ
)) == NULL
) ||
654 ((mbuf
=OPENSSL_malloc(BUFSIZZ
)) == NULL
))
656 BIO_printf(bio_err
,"out of memory\n");
661 verify_error
=X509_V_OK
;
670 if (strcmp(*argv
,"-host") == 0)
672 if (--argc
< 1) goto bad
;
675 else if (strcmp(*argv
,"-port") == 0)
677 if (--argc
< 1) goto bad
;
678 port
=atoi(*(++argv
));
679 if (port
== 0) goto bad
;
681 else if (strcmp(*argv
,"-connect") == 0)
683 if (--argc
< 1) goto bad
;
684 if (!extract_host_port(*(++argv
),&host
,NULL
,&port
))
687 else if (strcmp(*argv
,"-verify") == 0)
689 verify
=SSL_VERIFY_PEER
;
690 if (--argc
< 1) goto bad
;
691 verify_depth
=atoi(*(++argv
));
692 BIO_printf(bio_err
,"verify depth is %d\n",verify_depth
);
694 else if (strcmp(*argv
,"-cert") == 0)
696 if (--argc
< 1) goto bad
;
697 cert_file
= *(++argv
);
699 else if (strcmp(*argv
,"-sess_out") == 0)
701 if (--argc
< 1) goto bad
;
702 sess_out
= *(++argv
);
704 else if (strcmp(*argv
,"-sess_in") == 0)
706 if (--argc
< 1) goto bad
;
709 else if (strcmp(*argv
,"-certform") == 0)
711 if (--argc
< 1) goto bad
;
712 cert_format
= str2fmt(*(++argv
));
714 else if (args_verify(&argv
, &argc
, &badarg
, bio_err
, &vpm
))
720 else if (strcmp(*argv
,"-verify_return_error") == 0)
721 verify_return_error
= 1;
722 else if (strcmp(*argv
,"-prexit") == 0)
724 else if (strcmp(*argv
,"-crlf") == 0)
726 else if (strcmp(*argv
,"-quiet") == 0)
731 else if (strcmp(*argv
,"-ign_eof") == 0)
733 else if (strcmp(*argv
,"-no_ign_eof") == 0)
735 else if (strcmp(*argv
,"-pause") == 0)
737 else if (strcmp(*argv
,"-debug") == 0)
739 #ifndef OPENSSL_NO_TLSEXT
740 else if (strcmp(*argv
,"-tlsextdebug") == 0)
742 else if (strcmp(*argv
,"-status") == 0)
746 else if (strcmp(*argv
,"-wdebug") == 0)
749 else if (strcmp(*argv
,"-msg") == 0)
751 else if (strcmp(*argv
,"-showcerts") == 0)
753 else if (strcmp(*argv
,"-nbio_test") == 0)
755 else if (strcmp(*argv
,"-state") == 0)
757 #ifndef OPENSSL_NO_PSK
758 else if (strcmp(*argv
,"-psk_identity") == 0)
760 if (--argc
< 1) goto bad
;
761 psk_identity
=*(++argv
);
763 else if (strcmp(*argv
,"-psk") == 0)
767 if (--argc
< 1) goto bad
;
769 for (j
= 0; j
< strlen(psk_key
); j
++)
771 if (isxdigit((unsigned char)psk_key
[j
]))
773 BIO_printf(bio_err
,"Not a hex number '%s'\n",*argv
);
778 #ifndef OPENSSL_NO_SRP
779 else if (strcmp(*argv
,"-srpuser") == 0)
781 if (--argc
< 1) goto bad
;
782 srp_arg
.srplogin
= *(++argv
);
783 meth
=TLSv1_client_method();
785 else if (strcmp(*argv
,"-srppass") == 0)
787 if (--argc
< 1) goto bad
;
789 meth
=TLSv1_client_method();
791 else if (strcmp(*argv
,"-srp_strength") == 0)
793 if (--argc
< 1) goto bad
;
794 srp_arg
.strength
=atoi(*(++argv
));
795 BIO_printf(bio_err
,"SRP minimal length for N is %d\n",srp_arg
.strength
);
796 meth
=TLSv1_client_method();
798 else if (strcmp(*argv
,"-srp_lateuser") == 0)
801 meth
=TLSv1_client_method();
803 else if (strcmp(*argv
,"-srp_moregroups") == 0)
806 meth
=TLSv1_client_method();
809 #ifndef OPENSSL_NO_SSL2
810 else if (strcmp(*argv
,"-ssl2") == 0)
811 meth
=SSLv2_client_method();
813 #ifndef OPENSSL_NO_SSL3_METHOD
814 else if (strcmp(*argv
,"-ssl3") == 0)
815 meth
=SSLv3_client_method();
817 #ifndef OPENSSL_NO_TLS1
818 else if (strcmp(*argv
,"-tls1_2") == 0)
819 meth
=TLSv1_2_client_method();
820 else if (strcmp(*argv
,"-tls1_1") == 0)
821 meth
=TLSv1_1_client_method();
822 else if (strcmp(*argv
,"-tls1") == 0)
823 meth
=TLSv1_client_method();
825 #ifndef OPENSSL_NO_DTLS1
826 else if (strcmp(*argv
,"-dtls1") == 0)
828 meth
=DTLSv1_client_method();
829 socket_type
=SOCK_DGRAM
;
831 else if (strcmp(*argv
,"-fallback_scsv") == 0)
835 else if (strcmp(*argv
,"-timeout") == 0)
837 else if (strcmp(*argv
,"-mtu") == 0)
839 if (--argc
< 1) goto bad
;
840 socket_mtu
= atol(*(++argv
));
843 else if (strcmp(*argv
,"-bugs") == 0)
845 else if (strcmp(*argv
,"-keyform") == 0)
847 if (--argc
< 1) goto bad
;
848 key_format
= str2fmt(*(++argv
));
850 else if (strcmp(*argv
,"-pass") == 0)
852 if (--argc
< 1) goto bad
;
855 else if (strcmp(*argv
,"-key") == 0)
857 if (--argc
< 1) goto bad
;
860 else if (strcmp(*argv
,"-reconnect") == 0)
864 else if (strcmp(*argv
,"-CApath") == 0)
866 if (--argc
< 1) goto bad
;
869 else if (strcmp(*argv
,"-CAfile") == 0)
871 if (--argc
< 1) goto bad
;
874 else if (strcmp(*argv
,"-no_tls1_2") == 0)
875 off
|=SSL_OP_NO_TLSv1_2
;
876 else if (strcmp(*argv
,"-no_tls1_1") == 0)
877 off
|=SSL_OP_NO_TLSv1_1
;
878 else if (strcmp(*argv
,"-no_tls1") == 0)
879 off
|=SSL_OP_NO_TLSv1
;
880 else if (strcmp(*argv
,"-no_ssl3") == 0)
881 off
|=SSL_OP_NO_SSLv3
;
882 else if (strcmp(*argv
,"-no_ssl2") == 0)
883 off
|=SSL_OP_NO_SSLv2
;
884 else if (strcmp(*argv
,"-no_comp") == 0)
885 { off
|=SSL_OP_NO_COMPRESSION
; }
886 #ifndef OPENSSL_NO_TLSEXT
887 else if (strcmp(*argv
,"-no_ticket") == 0)
888 { off
|=SSL_OP_NO_TICKET
; }
889 # ifndef OPENSSL_NO_NEXTPROTONEG
890 else if (strcmp(*argv
,"-nextprotoneg") == 0)
892 if (--argc
< 1) goto bad
;
893 next_proto_neg_in
= *(++argv
);
897 else if (strcmp(*argv
,"-serverpref") == 0)
898 off
|=SSL_OP_CIPHER_SERVER_PREFERENCE
;
899 else if (strcmp(*argv
,"-legacy_renegotiation") == 0)
900 off
|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
;
901 else if (strcmp(*argv
,"-legacy_server_connect") == 0)
902 { off
|=SSL_OP_LEGACY_SERVER_CONNECT
; }
903 else if (strcmp(*argv
,"-no_legacy_server_connect") == 0)
904 { clr
|=SSL_OP_LEGACY_SERVER_CONNECT
; }
905 else if (strcmp(*argv
,"-cipher") == 0)
907 if (--argc
< 1) goto bad
;
911 else if (strcmp(*argv
,"-nbio") == 0)
914 else if (strcmp(*argv
,"-starttls") == 0)
916 if (--argc
< 1) goto bad
;
918 if (strcmp(*argv
,"smtp") == 0)
919 starttls_proto
= PROTO_SMTP
;
920 else if (strcmp(*argv
,"pop3") == 0)
921 starttls_proto
= PROTO_POP3
;
922 else if (strcmp(*argv
,"imap") == 0)
923 starttls_proto
= PROTO_IMAP
;
924 else if (strcmp(*argv
,"ftp") == 0)
925 starttls_proto
= PROTO_FTP
;
926 else if (strcmp(*argv
, "xmpp") == 0)
927 starttls_proto
= PROTO_XMPP
;
931 #ifndef OPENSSL_NO_ENGINE
932 else if (strcmp(*argv
,"-engine") == 0)
934 if (--argc
< 1) goto bad
;
935 engine_id
= *(++argv
);
937 else if (strcmp(*argv
,"-ssl_client_engine") == 0)
939 if (--argc
< 1) goto bad
;
940 ssl_client_engine_id
= *(++argv
);
943 else if (strcmp(*argv
,"-rand") == 0)
945 if (--argc
< 1) goto bad
;
948 #ifndef OPENSSL_NO_TLSEXT
949 else if (strcmp(*argv
,"-servername") == 0)
951 if (--argc
< 1) goto bad
;
952 servername
= *(++argv
);
953 /* meth=TLSv1_client_method(); */
956 #ifndef OPENSSL_NO_JPAKE
957 else if (strcmp(*argv
,"-jpake") == 0)
959 if (--argc
< 1) goto bad
;
960 jpake_secret
= *++argv
;
963 #ifndef OPENSSL_NO_SRTP
964 else if (strcmp(*argv
,"-use_srtp") == 0)
966 if (--argc
< 1) goto bad
;
967 srtp_profiles
= *(++argv
);
970 else if (strcmp(*argv
,"-keymatexport") == 0)
972 if (--argc
< 1) goto bad
;
973 keymatexportlabel
= *(++argv
);
975 else if (strcmp(*argv
,"-keymatexportlen") == 0)
977 if (--argc
< 1) goto bad
;
978 keymatexportlen
=atoi(*(++argv
));
979 if (keymatexportlen
== 0) goto bad
;
983 BIO_printf(bio_err
,"unknown option %s\n",*argv
);
997 #if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
1003 "Can't use JPAKE and PSK together\n");
1006 psk_identity
= "JPAKE";
1009 BIO_printf(bio_err
, "JPAKE sets cipher to PSK\n");
1016 OpenSSL_add_ssl_algorithms();
1017 SSL_load_error_strings();
1019 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
1020 next_proto
.status
= -1;
1021 if (next_proto_neg_in
)
1023 next_proto
.data
= next_protos_parse(&next_proto
.len
, next_proto_neg_in
);
1024 if (next_proto
.data
== NULL
)
1026 BIO_printf(bio_err
, "Error parsing -nextprotoneg argument\n");
1031 next_proto
.data
= NULL
;
1034 #ifndef OPENSSL_NO_ENGINE
1035 e
= setup_engine(bio_err
, engine_id
, 1);
1036 if (ssl_client_engine_id
)
1038 ssl_client_engine
= ENGINE_by_id(ssl_client_engine_id
);
1039 if (!ssl_client_engine
)
1042 "Error getting client auth engine\n");
1048 if (!app_passwd(bio_err
, passarg
, NULL
, &pass
, NULL
))
1050 BIO_printf(bio_err
, "Error getting password\n");
1054 if (key_file
== NULL
)
1055 key_file
= cert_file
;
1062 key
= load_key(bio_err
, key_file
, key_format
, 0, pass
, e
,
1063 "client certificate private key file");
1066 ERR_print_errors(bio_err
);
1075 cert
= load_cert(bio_err
,cert_file
,cert_format
,
1076 NULL
, e
, "client certificate file");
1080 ERR_print_errors(bio_err
);
1085 if (!app_RAND_load_file(NULL
, bio_err
, 1) && inrand
== NULL
1088 BIO_printf(bio_err
,"warning, not much extra random data, consider using the -rand option\n");
1091 BIO_printf(bio_err
,"%ld semi-random bytes loaded\n",
1092 app_RAND_load_files(inrand
));
1094 if (bio_c_out
== NULL
)
1096 if (c_quiet
&& !c_debug
&& !c_msg
)
1098 bio_c_out
=BIO_new(BIO_s_null());
1102 if (bio_c_out
== NULL
)
1103 bio_c_out
=BIO_new_fp(stdout
,BIO_NOCLOSE
);
1107 #ifndef OPENSSL_NO_SRP
1108 if(!app_passwd(bio_err
, srppass
, NULL
, &srp_arg
.srppassin
, NULL
))
1110 BIO_printf(bio_err
, "Error getting password\n");
1115 ctx
=SSL_CTX_new(meth
);
1118 ERR_print_errors(bio_err
);
1123 SSL_CTX_set1_param(ctx
, vpm
);
1125 #ifndef OPENSSL_NO_ENGINE
1126 if (ssl_client_engine
)
1128 if (!SSL_CTX_set_client_cert_engine(ctx
, ssl_client_engine
))
1130 BIO_puts(bio_err
, "Error setting client auth engine\n");
1131 ERR_print_errors(bio_err
);
1132 ENGINE_free(ssl_client_engine
);
1135 ENGINE_free(ssl_client_engine
);
1139 #ifndef OPENSSL_NO_PSK
1140 #ifdef OPENSSL_NO_JPAKE
1141 if (psk_key
!= NULL
)
1143 if (psk_key
!= NULL
|| jpake_secret
)
1147 BIO_printf(bio_c_out
, "PSK key given or JPAKE in use, setting client callback\n");
1148 SSL_CTX_set_psk_client_callback(ctx
, psk_client_cb
);
1151 #ifndef OPENSSL_NO_SRTP
1152 if (srtp_profiles
!= NULL
)
1153 SSL_CTX_set_tlsext_use_srtp(ctx
, srtp_profiles
);
1156 SSL_CTX_set_options(ctx
,SSL_OP_ALL
|off
);
1158 SSL_CTX_set_options(ctx
,off
);
1161 SSL_CTX_clear_options(ctx
, clr
);
1162 /* DTLS: partial reads end up discarding unread UDP bytes :-(
1163 * Setting read ahead solves this problem.
1165 if (socket_type
== SOCK_DGRAM
) SSL_CTX_set_read_ahead(ctx
, 1);
1167 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
1168 if (next_proto
.data
)
1169 SSL_CTX_set_next_proto_select_cb(ctx
, next_proto_cb
, &next_proto
);
1172 if (state
) SSL_CTX_set_info_callback(ctx
,apps_ssl_info_callback
);
1174 if(!SSL_CTX_set_cipher_list(ctx
,cipher
)) {
1175 BIO_printf(bio_err
,"error setting cipher list\n");
1176 ERR_print_errors(bio_err
);
1181 SSL_CTX_set_cipher_list(ctx
,getenv("SSL_CIPHER"));
1184 SSL_CTX_set_verify(ctx
,verify
,verify_callback
);
1185 if (!set_cert_key_stuff(ctx
,cert
,key
))
1188 if ((!SSL_CTX_load_verify_locations(ctx
,CAfile
,CApath
)) ||
1189 (!SSL_CTX_set_default_verify_paths(ctx
)))
1191 /* BIO_printf(bio_err,"error setting default verify locations\n"); */
1192 ERR_print_errors(bio_err
);
1196 #ifndef OPENSSL_NO_TLSEXT
1197 if (servername
!= NULL
)
1199 tlsextcbp
.biodebug
= bio_err
;
1200 SSL_CTX_set_tlsext_servername_callback(ctx
, ssl_servername_cb
);
1201 SSL_CTX_set_tlsext_servername_arg(ctx
, &tlsextcbp
);
1203 #ifndef OPENSSL_NO_SRP
1204 if (srp_arg
.srplogin
)
1206 if (!srp_lateuser
&& !SSL_CTX_set_srp_username(ctx
, srp_arg
.srplogin
))
1208 BIO_printf(bio_err
,"Unable to set SRP username\n");
1211 srp_arg
.msg
= c_msg
;
1212 srp_arg
.debug
= c_debug
;
1213 SSL_CTX_set_srp_cb_arg(ctx
,&srp_arg
);
1214 SSL_CTX_set_srp_client_pwd_callback(ctx
, ssl_give_srp_client_pwd_cb
);
1215 SSL_CTX_set_srp_strength(ctx
, srp_arg
.strength
);
1216 if (c_msg
|| c_debug
|| srp_arg
.amp
== 0)
1217 SSL_CTX_set_srp_verify_param_callback(ctx
, ssl_srp_verify_param_cb
);
1227 BIO
*stmp
= BIO_new_file(sess_in
, "r");
1230 BIO_printf(bio_err
, "Can't open session file %s\n",
1232 ERR_print_errors(bio_err
);
1235 sess
= PEM_read_bio_SSL_SESSION(stmp
, NULL
, 0, NULL
);
1239 BIO_printf(bio_err
, "Can't open session file %s\n",
1241 ERR_print_errors(bio_err
);
1244 SSL_set_session(con
, sess
);
1245 SSL_SESSION_free(sess
);
1249 SSL_set_mode(con
, SSL_MODE_SEND_FALLBACK_SCSV
);
1251 #ifndef OPENSSL_NO_TLSEXT
1252 if (servername
!= NULL
)
1254 if (!SSL_set_tlsext_host_name(con
,servername
))
1256 BIO_printf(bio_err
,"Unable to set TLS servername extension.\n");
1257 ERR_print_errors(bio_err
);
1262 #ifndef OPENSSL_NO_KRB5
1263 if (con
&& (kctx
= kssl_ctx_new()) != NULL
)
1265 SSL_set0_kssl_ctx(con
, kctx
);
1266 kssl_ctx_setstring(kctx
, KSSL_SERVER
, host
);
1268 #endif /* OPENSSL_NO_KRB5 */
1269 /* SSL_set_cipher_list(con,"RC4-MD5"); */
1271 #ifdef TLSEXT_TYPE_opaque_prf_input
1272 SSL_set_tlsext_opaque_prf_input(con
, "Test client", 11);
1278 if (init_client(&s
,host
,port
,socket_type
) == 0)
1280 BIO_printf(bio_err
,"connect:errno=%d\n",get_last_socket_error());
1284 BIO_printf(bio_c_out
,"CONNECTED(%08X)\n",s
);
1290 BIO_printf(bio_c_out
,"turning on non blocking io\n");
1291 if (BIO_socket_ioctl(s
,FIONBIO
,&l
) < 0)
1293 ERR_print_errors(bio_err
);
1298 if (c_Pause
& 0x01) SSL_set_debug(con
, 1);
1300 if ( SSL_version(con
) == DTLS1_VERSION
)
1303 sbio
=BIO_new_dgram(s
,BIO_NOCLOSE
);
1304 if (getsockname(s
, &peer
, (void *)&peerlen
) < 0)
1306 BIO_printf(bio_err
, "getsockname:errno=%d\n",
1307 get_last_socket_error());
1312 (void)BIO_ctrl_set_connected(sbio
, 1, &peer
);
1314 if (enable_timeouts
)
1317 timeout
.tv_usec
= DGRAM_RCV_TIMEOUT
;
1318 BIO_ctrl(sbio
, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT
, 0, &timeout
);
1321 timeout
.tv_usec
= DGRAM_SND_TIMEOUT
;
1322 BIO_ctrl(sbio
, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT
, 0, &timeout
);
1327 if(socket_mtu
< DTLS_get_link_min_mtu(con
))
1329 BIO_printf(bio_err
,"MTU too small. Must be at least %ld\n",
1330 DTLS_get_link_min_mtu(con
));
1334 SSL_set_options(con
, SSL_OP_NO_QUERY_MTU
);
1335 if(!DTLS_set_link_mtu(con
, socket_mtu
))
1337 BIO_printf(bio_err
, "Failed to set MTU\n");
1343 /* want to do MTU discovery */
1344 BIO_ctrl(sbio
, BIO_CTRL_DGRAM_MTU_DISCOVER
, 0, NULL
);
1347 sbio
=BIO_new_socket(s
,BIO_NOCLOSE
);
1353 test
=BIO_new(BIO_f_nbio_test());
1354 sbio
=BIO_push(test
,sbio
);
1359 SSL_set_debug(con
, 1);
1360 BIO_set_callback(sbio
,bio_dump_callback
);
1361 BIO_set_callback_arg(sbio
,(char *)bio_c_out
);
1365 SSL_set_msg_callback(con
, msg_cb
);
1366 SSL_set_msg_callback_arg(con
, bio_c_out
);
1368 #ifndef OPENSSL_NO_TLSEXT
1371 SSL_set_tlsext_debug_callback(con
, tlsext_cb
);
1372 SSL_set_tlsext_debug_arg(con
, bio_c_out
);
1376 SSL_set_tlsext_status_type(con
, TLSEXT_STATUSTYPE_ocsp
);
1377 SSL_CTX_set_tlsext_status_cb(ctx
, ocsp_resp_cb
);
1378 SSL_CTX_set_tlsext_status_arg(ctx
, bio_c_out
);
1381 STACK_OF(OCSP_RESPID
) *ids
= sk_OCSP_RESPID_new_null();
1382 OCSP_RESPID
*id
= OCSP_RESPID_new();
1383 id
->value
.byKey
= ASN1_OCTET_STRING_new();
1384 id
->type
= V_OCSP_RESPID_KEY
;
1385 ASN1_STRING_set(id
->value
.byKey
, "Hello World", -1);
1386 sk_OCSP_RESPID_push(ids
, id
);
1387 SSL_set_tlsext_status_ids(con
, ids
);
1392 #ifndef OPENSSL_NO_JPAKE
1394 jpake_client_auth(bio_c_out
, sbio
, jpake_secret
);
1397 SSL_set_bio(con
,sbio
,sbio
);
1398 SSL_set_connect_state(con
);
1400 /* ok, lets connect */
1401 width
=SSL_get_fd(con
)+1;
1414 /* This is an ugly hack that does a lot of assumptions */
1415 /* We do have to handle multi-line responses which may come
1416 in a single packet or not. We therefore have to use
1417 BIO_gets() which does need a buffering BIO. So during
1418 the initial chitchat we do push a buffering BIO into the
1419 chain that is removed again later on to not disturb the
1420 rest of the s_client operation. */
1421 if (starttls_proto
== PROTO_SMTP
)
1424 BIO
*fbio
= BIO_new(BIO_f_buffer());
1425 BIO_push(fbio
, sbio
);
1426 /* wait for multi-line response to end from SMTP */
1429 mbuf_len
= BIO_gets(fbio
,mbuf
,BUFSIZZ
);
1431 while (mbuf_len
>3 && mbuf
[3]=='-');
1432 /* STARTTLS command requires EHLO... */
1433 BIO_printf(fbio
,"EHLO openssl.client.net\r\n");
1434 (void)BIO_flush(fbio
);
1435 /* wait for multi-line response to end EHLO SMTP response */
1438 mbuf_len
= BIO_gets(fbio
,mbuf
,BUFSIZZ
);
1439 if (strstr(mbuf
,"STARTTLS"))
1442 while (mbuf_len
>3 && mbuf
[3]=='-');
1443 (void)BIO_flush(fbio
);
1448 "didn't found starttls in server response,"
1449 " try anyway...\n");
1450 BIO_printf(sbio
,"STARTTLS\r\n");
1451 BIO_read(sbio
,sbuf
,BUFSIZZ
);
1453 else if (starttls_proto
== PROTO_POP3
)
1455 BIO_read(sbio
,mbuf
,BUFSIZZ
);
1456 BIO_printf(sbio
,"STLS\r\n");
1457 BIO_read(sbio
,sbuf
,BUFSIZZ
);
1459 else if (starttls_proto
== PROTO_IMAP
)
1462 BIO
*fbio
= BIO_new(BIO_f_buffer());
1463 BIO_push(fbio
, sbio
);
1464 BIO_gets(fbio
,mbuf
,BUFSIZZ
);
1465 /* STARTTLS command requires CAPABILITY... */
1466 BIO_printf(fbio
,". CAPABILITY\r\n");
1467 (void)BIO_flush(fbio
);
1468 /* wait for multi-line CAPABILITY response */
1471 mbuf_len
= BIO_gets(fbio
,mbuf
,BUFSIZZ
);
1472 if (strstr(mbuf
,"STARTTLS"))
1475 while (mbuf_len
>3 && mbuf
[0]!='.');
1476 (void)BIO_flush(fbio
);
1481 "didn't found STARTTLS in server response,"
1482 " try anyway...\n");
1483 BIO_printf(sbio
,". STARTTLS\r\n");
1484 BIO_read(sbio
,sbuf
,BUFSIZZ
);
1486 else if (starttls_proto
== PROTO_FTP
)
1488 BIO
*fbio
= BIO_new(BIO_f_buffer());
1489 BIO_push(fbio
, sbio
);
1490 /* wait for multi-line response to end from FTP */
1493 mbuf_len
= BIO_gets(fbio
,mbuf
,BUFSIZZ
);
1495 while (mbuf_len
>3 && mbuf
[3]=='-');
1496 (void)BIO_flush(fbio
);
1499 BIO_printf(sbio
,"AUTH TLS\r\n");
1500 BIO_read(sbio
,sbuf
,BUFSIZZ
);
1502 if (starttls_proto
== PROTO_XMPP
)
1505 BIO_printf(sbio
,"<stream:stream "
1506 "xmlns:stream='http://etherx.jabber.org/streams' "
1507 "xmlns='jabber:client' to='%s' version='1.0'>", host
);
1508 seen
= BIO_read(sbio
,mbuf
,BUFSIZZ
);
1510 while (!strstr(mbuf
, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'"))
1512 if (strstr(mbuf
, "/stream:features>"))
1514 seen
= BIO_read(sbio
,mbuf
,BUFSIZZ
);
1517 BIO_printf(sbio
, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
1518 seen
= BIO_read(sbio
,sbuf
,BUFSIZZ
);
1520 if (!strstr(sbuf
, "<proceed"))
1530 if ((SSL_version(con
) == DTLS1_VERSION
) &&
1531 DTLSv1_get_timeout(con
, &timeout
))
1532 timeoutp
= &timeout
;
1536 if (SSL_in_init(con
) && !SSL_total_renegotiations(con
))
1547 #if 0 /* This test doesn't really work as intended (needs to be fixed) */
1548 #ifndef OPENSSL_NO_TLSEXT
1549 if (servername
!= NULL
&& !SSL_session_reused(con
))
1551 BIO_printf(bio_c_out
,"Server did %sacknowledge servername extension.\n",tlsextcbp
.ack
?"":"not ");
1557 BIO
*stmp
= BIO_new_file(sess_out
, "w");
1560 PEM_write_bio_SSL_SESSION(stmp
, SSL_get_session(con
));
1564 BIO_printf(bio_err
, "Error writing session file %s\n", sess_out
);
1566 print_stuff(bio_c_out
,con
,full_log
);
1567 if (full_log
> 0) full_log
--;
1571 BIO_printf(bio_err
,"%s",mbuf
);
1572 /* We don't need to know any more */
1573 starttls_proto
= PROTO_OFF
;
1579 BIO_printf(bio_c_out
,"drop connection and then reconnect\n");
1581 SSL_set_connect_state(con
);
1582 SHUTDOWN(SSL_get_fd(con
));
1588 ssl_pending
= read_ssl
&& SSL_pending(con
);
1592 #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined (OPENSSL_SYS_BEOS_R5)
1595 if (read_tty
) openssl_fdset(fileno(stdin
),&readfds
);
1596 if (write_tty
) openssl_fdset(fileno(stdout
),&writefds
);
1599 openssl_fdset(SSL_get_fd(con
),&readfds
);
1601 openssl_fdset(SSL_get_fd(con
),&writefds
);
1603 if(!tty_on
|| !write_tty
) {
1605 openssl_fdset(SSL_get_fd(con
),&readfds
);
1607 openssl_fdset(SSL_get_fd(con
),&writefds
);
1610 /*- printf("mode tty(%d %d%d) ssl(%d%d)\n",
1611 tty_on,read_tty,write_tty,read_ssl,write_ssl);*/
1613 /* Note: under VMS with SOCKETSHR the second parameter
1614 * is currently of type (int *) whereas under other
1615 * systems it is (void *) if you don't have a cast it
1616 * will choke the compiler: if you do have a cast then
1617 * you can either go for (int *) or (void *).
1619 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
1620 /* Under Windows/DOS we make the assumption that we can
1621 * always write to the tty: therefore if we need to
1622 * write to the tty we just fall through. Otherwise
1623 * we timeout the select every second and see if there
1624 * are any keypresses. Note: this is a hack, in a proper
1625 * Windows application we wouldn't do this.
1632 i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1634 #if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
1635 if(!i
&& (!_kbhit() || !read_tty
) ) continue;
1637 if(!i
&& (!((_kbhit()) || (WAIT_OBJECT_0
== WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE
), 0))) || !read_tty
) ) continue;
1639 } else i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1642 #elif defined(OPENSSL_SYS_NETWARE)
1647 i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1649 } else i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1652 #elif defined(OPENSSL_SYS_BEOS_R5)
1653 /* Under BeOS-R5 the situation is similar to DOS */
1656 (void)fcntl(fileno(stdin
), F_SETFL
, O_NONBLOCK
);
1661 i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1663 if (read(fileno(stdin
), sbuf
, 0) >= 0)
1665 if (!i
&& (stdin_set
!= 1 || !read_tty
))
1667 } else i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1670 (void)fcntl(fileno(stdin
), F_SETFL
, 0);
1672 i
=select(width
,(void *)&readfds
,(void *)&writefds
,
1677 BIO_printf(bio_err
,"bad select %d\n",
1678 get_last_socket_error());
1684 if ((SSL_version(con
) == DTLS1_VERSION
) && DTLSv1_handle_timeout(con
) > 0)
1686 BIO_printf(bio_err
,"TIMEOUT occured\n");
1689 if (!ssl_pending
&& FD_ISSET(SSL_get_fd(con
),&writefds
))
1691 k
=SSL_write(con
,&(cbuf
[cbuf_off
]),
1692 (unsigned int)cbuf_len
);
1693 switch (SSL_get_error(con
,k
))
1695 case SSL_ERROR_NONE
:
1698 if (k
<= 0) goto end
;
1699 /* we have done a write(con,NULL,0); */
1705 else /* if (cbuf_len > 0) */
1711 case SSL_ERROR_WANT_WRITE
:
1712 BIO_printf(bio_c_out
,"write W BLOCK\n");
1716 case SSL_ERROR_WANT_READ
:
1717 BIO_printf(bio_c_out
,"write R BLOCK\n");
1722 case SSL_ERROR_WANT_X509_LOOKUP
:
1723 BIO_printf(bio_c_out
,"write X BLOCK\n");
1725 case SSL_ERROR_ZERO_RETURN
:
1728 BIO_printf(bio_c_out
,"shutdown\n");
1739 case SSL_ERROR_SYSCALL
:
1740 if ((k
!= 0) || (cbuf_len
!= 0))
1742 BIO_printf(bio_err
,"write:errno=%d\n",
1743 get_last_socket_error());
1753 ERR_print_errors(bio_err
);
1757 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
1758 /* Assume Windows/DOS/BeOS can always write */
1759 else if (!ssl_pending
&& write_tty
)
1761 else if (!ssl_pending
&& FD_ISSET(fileno(stdout
),&writefds
))
1764 #ifdef CHARSET_EBCDIC
1765 ascii2ebcdic(&(sbuf
[sbuf_off
]),&(sbuf
[sbuf_off
]),sbuf_len
);
1767 i
=raw_write_stdout(&(sbuf
[sbuf_off
]),sbuf_len
);
1771 BIO_printf(bio_c_out
,"DONE\n");
1785 else if (ssl_pending
|| FD_ISSET(SSL_get_fd(con
),&readfds
))
1788 { static int iiii
; if (++iiii
== 52) { SSL_renegotiate(con
); iiii
=0; } }
1791 k
=SSL_read(con
,sbuf
,1024 /* BUFSIZZ */ );
1793 /* Demo for pending and peek :-) */
1794 k
=SSL_read(con
,sbuf
,16);
1796 printf("read=%d pending=%d peek=%d\n",k
,SSL_pending(con
),SSL_peek(con
,zbuf
,10240));
1800 switch (SSL_get_error(con
,k
))
1802 case SSL_ERROR_NONE
:
1811 case SSL_ERROR_WANT_WRITE
:
1812 BIO_printf(bio_c_out
,"read W BLOCK\n");
1816 case SSL_ERROR_WANT_READ
:
1817 BIO_printf(bio_c_out
,"read R BLOCK\n");
1820 if ((read_tty
== 0) && (write_ssl
== 0))
1823 case SSL_ERROR_WANT_X509_LOOKUP
:
1824 BIO_printf(bio_c_out
,"read X BLOCK\n");
1826 case SSL_ERROR_SYSCALL
:
1827 ret
=get_last_socket_error();
1828 BIO_printf(bio_err
,"read:errno=%d\n",ret
);
1830 case SSL_ERROR_ZERO_RETURN
:
1831 BIO_printf(bio_c_out
,"closed\n");
1835 ERR_print_errors(bio_err
);
1841 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
1842 #if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
1845 else if ((_kbhit()) || (WAIT_OBJECT_0
== WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE
), 0)))
1847 #elif defined (OPENSSL_SYS_NETWARE)
1849 #elif defined(OPENSSL_SYS_BEOS_R5)
1852 else if (FD_ISSET(fileno(stdin
),&readfds
))
1859 i
=raw_read_stdin(cbuf
,BUFSIZZ
/2);
1861 /* both loops are skipped when i <= 0 */
1862 for (j
= 0; j
< i
; j
++)
1863 if (cbuf
[j
] == '\n')
1865 for (j
= i
-1; j
>= 0; j
--)
1867 cbuf
[j
+lf_num
] = cbuf
[j
];
1868 if (cbuf
[j
] == '\n')
1872 cbuf
[j
+lf_num
] = '\r';
1875 assert(lf_num
== 0);
1878 i
=raw_read_stdin(cbuf
,BUFSIZZ
);
1880 if ((!c_ign_eof
) && ((i
<= 0) || (cbuf
[0] == 'Q')))
1882 BIO_printf(bio_err
,"DONE\n");
1887 if ((!c_ign_eof
) && (cbuf
[0] == 'R'))
1889 BIO_printf(bio_err
,"RENEGOTIATING\n");
1890 SSL_renegotiate(con
);
1893 #ifndef OPENSSL_NO_HEARTBEATS
1894 else if ((!c_ign_eof
) && (cbuf
[0] == 'B'))
1896 BIO_printf(bio_err
,"HEARTBEATING\n");
1905 #ifdef CHARSET_EBCDIC
1906 ebcdic2ascii(cbuf
, cbuf
, i
);
1918 print_stuff(bio_c_out
,con
,full_log
);
1920 SHUTDOWN(SSL_get_fd(con
));
1925 print_stuff(bio_c_out
,con
,1);
1928 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
1929 if (next_proto
.data
)
1930 OPENSSL_free(next_proto
.data
);
1932 if (ctx
!= NULL
) SSL_CTX_free(ctx
);
1940 X509_VERIFY_PARAM_free(vpm
);
1941 if (cbuf
!= NULL
) { OPENSSL_cleanse(cbuf
,BUFSIZZ
); OPENSSL_free(cbuf
); }
1942 if (sbuf
!= NULL
) { OPENSSL_cleanse(sbuf
,BUFSIZZ
); OPENSSL_free(sbuf
); }
1943 if (mbuf
!= NULL
) { OPENSSL_cleanse(mbuf
,BUFSIZZ
); OPENSSL_free(mbuf
); }
1944 if (bio_c_out
!= NULL
)
1946 BIO_free(bio_c_out
);
1954 static void print_stuff(BIO
*bio
, SSL
*s
, int full
)
1958 static const char *space
=" ";
1961 STACK_OF(X509_NAME
) *sk2
;
1962 const SSL_CIPHER
*c
;
1965 #ifndef OPENSSL_NO_COMP
1966 const COMP_METHOD
*comp
, *expansion
;
1968 unsigned char *exportedkeymat
;
1972 int got_a_chain
= 0;
1974 sk
=SSL_get_peer_cert_chain(s
);
1977 got_a_chain
= 1; /* we don't have it for SSL2 (yet) */
1979 BIO_printf(bio
,"---\nCertificate chain\n");
1980 for (i
=0; i
<sk_X509_num(sk
); i
++)
1982 X509_NAME_oneline(X509_get_subject_name(
1983 sk_X509_value(sk
,i
)),buf
,sizeof buf
);
1984 BIO_printf(bio
,"%2d s:%s\n",i
,buf
);
1985 X509_NAME_oneline(X509_get_issuer_name(
1986 sk_X509_value(sk
,i
)),buf
,sizeof buf
);
1987 BIO_printf(bio
," i:%s\n",buf
);
1989 PEM_write_bio_X509(bio
,sk_X509_value(sk
,i
));
1993 BIO_printf(bio
,"---\n");
1994 peer
=SSL_get_peer_certificate(s
);
1997 BIO_printf(bio
,"Server certificate\n");
1998 if (!(c_showcerts
&& got_a_chain
)) /* Redundant if we showed the whole chain */
1999 PEM_write_bio_X509(bio
,peer
);
2000 X509_NAME_oneline(X509_get_subject_name(peer
),
2002 BIO_printf(bio
,"subject=%s\n",buf
);
2003 X509_NAME_oneline(X509_get_issuer_name(peer
),
2005 BIO_printf(bio
,"issuer=%s\n",buf
);
2008 BIO_printf(bio
,"no peer certificate available\n");
2010 sk2
=SSL_get_client_CA_list(s
);
2011 if ((sk2
!= NULL
) && (sk_X509_NAME_num(sk2
) > 0))
2013 BIO_printf(bio
,"---\nAcceptable client certificate CA names\n");
2014 for (i
=0; i
<sk_X509_NAME_num(sk2
); i
++)
2016 xn
=sk_X509_NAME_value(sk2
,i
);
2017 X509_NAME_oneline(xn
,buf
,sizeof(buf
));
2018 BIO_write(bio
,buf
,strlen(buf
));
2019 BIO_write(bio
,"\n",1);
2024 BIO_printf(bio
,"---\nNo client certificate CA names sent\n");
2026 p
=SSL_get_shared_ciphers(s
,buf
,sizeof buf
);
2029 /* This works only for SSL 2. In later protocol
2030 * versions, the client does not know what other
2031 * ciphers (in addition to the one to be used
2032 * in the current connection) the server supports. */
2034 BIO_printf(bio
,"---\nCiphers common between both SSL endpoints:\n");
2040 BIO_write(bio
,space
,15-j
%25);
2043 BIO_write(bio
,((i
%3)?" ":"\n"),1);
2052 BIO_write(bio
,"\n",1);
2055 BIO_printf(bio
,"---\nSSL handshake has read %ld bytes and written %ld bytes\n",
2056 BIO_number_read(SSL_get_rbio(s
)),
2057 BIO_number_written(SSL_get_wbio(s
)));
2059 BIO_printf(bio
,(SSL_cache_hit(s
)?"---\nReused, ":"---\nNew, "));
2060 c
=SSL_get_current_cipher(s
);
2061 BIO_printf(bio
,"%s, Cipher is %s\n",
2062 SSL_CIPHER_get_version(c
),
2063 SSL_CIPHER_get_name(c
));
2066 pktmp
= X509_get_pubkey(peer
);
2067 BIO_printf(bio
,"Server public key is %d bit\n",
2068 EVP_PKEY_bits(pktmp
));
2069 EVP_PKEY_free(pktmp
);
2071 BIO_printf(bio
, "Secure Renegotiation IS%s supported\n",
2072 SSL_get_secure_renegotiation_support(s
) ? "" : " NOT");
2073 #ifndef OPENSSL_NO_COMP
2074 comp
=SSL_get_current_compression(s
);
2075 expansion
=SSL_get_current_expansion(s
);
2076 BIO_printf(bio
,"Compression: %s\n",
2077 comp
? SSL_COMP_get_name(comp
) : "NONE");
2078 BIO_printf(bio
,"Expansion: %s\n",
2079 expansion
? SSL_COMP_get_name(expansion
) : "NONE");
2084 /* Print out local port of connection: useful for debugging */
2086 struct sockaddr_in ladd
;
2087 socklen_t ladd_size
= sizeof(ladd
);
2088 sock
= SSL_get_fd(s
);
2089 getsockname(sock
, (struct sockaddr
*)&ladd
, &ladd_size
);
2090 BIO_printf(bio_c_out
, "LOCAL PORT is %u\n", ntohs(ladd
.sin_port
));
2094 #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
2095 if (next_proto
.status
!= -1) {
2096 const unsigned char *proto
;
2097 unsigned int proto_len
;
2098 SSL_get0_next_proto_negotiated(s
, &proto
, &proto_len
);
2099 BIO_printf(bio
, "Next protocol: (%d) ", next_proto
.status
);
2100 BIO_write(bio
, proto
, proto_len
);
2101 BIO_write(bio
, "\n", 1);
2105 #ifndef OPENSSL_NO_SRTP
2107 SRTP_PROTECTION_PROFILE
*srtp_profile
=SSL_get_selected_srtp_profile(s
);
2110 BIO_printf(bio
,"SRTP Extension negotiated, profile=%s\n",
2111 srtp_profile
->name
);
2115 SSL_SESSION_print(bio
,SSL_get_session(s
));
2116 if (keymatexportlabel
!= NULL
)
2118 BIO_printf(bio
, "Keying material exporter:\n");
2119 BIO_printf(bio
, " Label: '%s'\n", keymatexportlabel
);
2120 BIO_printf(bio
, " Length: %i bytes\n", keymatexportlen
);
2121 exportedkeymat
= OPENSSL_malloc(keymatexportlen
);
2122 if (exportedkeymat
!= NULL
)
2124 if (!SSL_export_keying_material(s
, exportedkeymat
,
2127 strlen(keymatexportlabel
),
2130 BIO_printf(bio
, " Error\n");
2134 BIO_printf(bio
, " Keying material: ");
2135 for (i
=0; i
<keymatexportlen
; i
++)
2136 BIO_printf(bio
, "%02X",
2138 BIO_printf(bio
, "\n");
2140 OPENSSL_free(exportedkeymat
);
2143 BIO_printf(bio
,"---\n");
2146 /* flush, or debugging output gets mixed with http response */
2147 (void)BIO_flush(bio
);
2150 #ifndef OPENSSL_NO_TLSEXT
2152 static int ocsp_resp_cb(SSL
*s
, void *arg
)
2154 const unsigned char *p
;
2157 len
= SSL_get_tlsext_status_ocsp_resp(s
, &p
);
2158 BIO_puts(arg
, "OCSP response: ");
2161 BIO_puts(arg
, "no response sent\n");
2164 rsp
= d2i_OCSP_RESPONSE(NULL
, &p
, len
);
2167 BIO_puts(arg
, "response parse error\n");
2168 BIO_dump_indent(arg
, (char *)p
, len
, 4);
2171 BIO_puts(arg
, "\n======================================\n");
2172 OCSP_RESPONSE_print(arg
, rsp
, 0);
2173 BIO_puts(arg
, "======================================\n");
2174 OCSP_RESPONSE_free(rsp
);