config/acx.m4

   1 # Autoconf M4 include file defining utility macros for complex Canadian
   2 # cross builds.
   3
   4 dnl ####
   5 dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
   6 dnl # $build_alias or canonical $build if blank.
   7 dnl # Used when we would use $build_alias, but empty is not OK.
   8 AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_BUILD],
   9 [AC_REQUIRE([AC_CANONICAL_BUILD]) []dnl
  10 case ${build_alias} in
  11   "") build_noncanonical=${build} ;;
  12   *) build_noncanonical=${build_alias} ;;
  13 esac
  14 ]) []dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
  15
  16 dnl ####
  17 dnl # _GCC_TOPLEV_NONCANONICAL_HOST
  18 dnl # $host_alias, or $build_noncanonical if blank.
  19 dnl # Used when we would use $host_alias, but empty is not OK.
  20 AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_HOST],
  21 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
  22 case ${host_alias} in
  23   "") host_noncanonical=${build_noncanonical} ;;
  24   *) host_noncanonical=${host_alias} ;;
  25 esac
  26 ]) []dnl # _GCC_TOPLEV_NONCANONICAL_HOST
  27
  28 dnl ####
  29 dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
  30 dnl # $target_alias or $host_noncanonical if blank.
  31 dnl # Used when we would use $target_alias, but empty is not OK.
  32 AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_TARGET],
  33 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
  34 case ${target_alias} in
  35   "") target_noncanonical=${host_noncanonical} ;;
  36   *) target_noncanonical=${target_alias} ;;
  37 esac
  38 ]) []dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
  39
  40 dnl ####
  41 dnl # ACX_NONCANONICAL_BUILD
  42 dnl # Like underscored version, but AC_SUBST's.
  43 AC_DEFUN([ACX_NONCANONICAL_BUILD],
  44 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
  45 AC_SUBST(build_noncanonical)
  46 ]) []dnl # ACX_NONCANONICAL_BUILD
  47
  48 dnl ####
  49 dnl # ACX_NONCANONICAL_HOST
  50 dnl # Like underscored version, but AC_SUBST's.
  51 AC_DEFUN([ACX_NONCANONICAL_HOST],
  52 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
  53 AC_SUBST(host_noncanonical)
  54 ]) []dnl # ACX_NONCANONICAL_HOST
  55
  56 dnl ####
  57 dnl # ACX_NONCANONICAL_TARGET
  58 dnl # Like underscored version, but AC_SUBST's.
  59 AC_DEFUN([ACX_NONCANONICAL_TARGET],
  60 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
  61 AC_SUBST(target_noncanonical)
  62 ]) []dnl # ACX_NONCANONICAL_TARGET
  63
  64 dnl ####
  65 dnl # GCC_TOPLEV_SUBDIRS
  66 dnl # GCC & friends build 'build', 'host', and 'target' tools.  These must
  67 dnl # be separated into three well-known subdirectories of the build directory:
  68 dnl # build_subdir, host_subdir, and target_subdir.  The values are determined
  69 dnl # here so that they can (theoretically) be changed in the future.  They
  70 dnl # were previously reproduced across many different files.
  71 dnl #
  72 dnl # This logic really amounts to very little with autoconf 2.13; it will
  73 dnl # amount to a lot more with autoconf 2.5x.
  74 AC_DEFUN([GCC_TOPLEV_SUBDIRS],
  75 [AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
  76 AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
  77
  78 # post-stage1 host modules use a different CC_FOR_BUILD so, in order to
  79 # have matching libraries, they should use host libraries: Makefile.tpl
  80 # arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
  81 # However, they still use the build modules, because the corresponding
  82 # host modules (e.g. bison) are only built for the host when bootstrap
  83 # finishes. So:
  84 # - build_subdir is where we find build modules, and never changes.
  85 # - build_libsubdir is where we find build libraries, and can be overridden.
  86
  87 # Prefix 'build-' so this never conflicts with target_subdir.
  88 build_subdir="build-${build_noncanonical}"
  89 AC_ARG_WITH(build-libsubdir,
  90 [  --with-build-libsubdir=[DIR]  Directory where to find libraries for build system],
  91 build_libsubdir="$withval",
  92 build_libsubdir="$build_subdir")
  93 # --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
  94 if ( test $srcdir = . && test -d gcc ) \
  95    || test -d $srcdir/../host-${host_noncanonical}; then
  96   host_subdir="host-${host_noncanonical}"
  97 else
  98   host_subdir=.
  99 fi
 100 # No prefix.
 101 target_subdir=${target_noncanonical}
 102 AC_SUBST([build_libsubdir]) []dnl
 103 AC_SUBST([build_subdir]) []dnl
 104 AC_SUBST([host_subdir]) []dnl
 105 AC_SUBST([target_subdir]) []dnl
 106 ]) []dnl # GCC_TOPLEV_SUBDIRS
 107
 108
 109 ####
 110 # _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
 111 # or AC_INIT.
 112 # These demand that AC_CANONICAL_SYSTEM be called beforehand.
 113 AC_DEFUN([_NCN_TOOL_PREFIXES],
 114 [ncn_tool_prefix=
 115 test -n "$host_alias" && ncn_tool_prefix=$host_alias-
 116 ncn_target_tool_prefix=
 117 test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
 118 ]) []dnl # _NCN_TOOL_PREFIXES
 119
 120 ####
 121 # NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
 122 # Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
 123
 124 AC_DEFUN([NCN_STRICT_CHECK_TOOLS],
 125 [AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
 126 AC_ARG_VAR([$1], [$1 for the host])
 127
 128 if test -n "[$]$1"; then
 129   ac_cv_prog_$1=[$]$1
 130 elif test -n "$ac_cv_prog_$1"; then
 131   $1=$ac_cv_prog_$1
 132 fi
 133
 134 if test -n "$ac_cv_prog_$1"; then
 135   for ncn_progname in $2; do
 136     AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
 137   done
 138 fi
 139
 140 for ncn_progname in $2; do
 141   if test -n "$ncn_tool_prefix"; then
 142     AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}],
 143                   [${ncn_tool_prefix}${ncn_progname}], , [$4])
 144   fi
 145   if test -z "$ac_cv_prog_$1" && test $build = $host ; then
 146     AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
 147   fi
 148   test -n "$ac_cv_prog_$1" && break
 149 done
 150
 151 if test -z "$ac_cv_prog_$1" ; then
 152   ifelse([$3],[], [set dummy $2
 153   if test $build = $host ; then
 154     $1="[$]2"
 155   else
 156     $1="${ncn_tool_prefix}[$]2"
 157   fi], [$1="$3"])
 158 fi
 159 ]) []dnl # NCN_STRICT_CHECK_TOOLS
 160
 161 ####
 162 # NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
 163 # Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
 164
 165 AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS],
 166 [AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
 167 AC_ARG_VAR([$1], patsubst([$1], [_FOR_TARGET$], [])[ for the target])
 168
 169 if test -n "[$]$1"; then
 170   ac_cv_prog_$1=[$]$1
 171 elif test -n "$ac_cv_prog_$1"; then
 172   $1=$ac_cv_prog_$1
 173 fi
 174
 175 if test -n "$ac_cv_prog_$1"; then
 176   for ncn_progname in $2; do
 177     AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
 178   done
 179 fi
 180
 181 if test -z "$ac_cv_prog_$1" && test -n "$with_build_time_tools"; then
 182   for ncn_progname in $2; do
 183     AC_MSG_CHECKING([for ${ncn_progname} in $with_build_time_tools])
 184     if test -x $with_build_time_tools/${ncn_progname}; then
 185       ac_cv_prog_$1=$with_build_time_tools/${ncn_progname}
 186       AC_MSG_RESULT(yes)
 187       break
 188     else
 189       AC_MSG_RESULT(no)
 190     fi
 191   done
 192 fi
 193
 194 if test -z "$ac_cv_prog_$1"; then
 195   for ncn_progname in $2; do
 196     if test -n "$ncn_target_tool_prefix"; then
 197       AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}],
 198                     [${ncn_target_tool_prefix}${ncn_progname}], , [$4])
 199     fi
 200     if test -z "$ac_cv_prog_$1" && test $build = $target ; then
 201       AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
 202     fi
 203     test -n "$ac_cv_prog_$1" && break
 204   done
 205 fi
 206
 207 if test -z "$ac_cv_prog_$1" ; then
 208   ifelse([$3],[], [set dummy $2
 209   if test $build = $target ; then
 210     $1="[$]2"
 211   else
 212     $1="${ncn_target_tool_prefix}[$]2"
 213   fi], [$1="$3"])
 214 else
 215   $1="$ac_cv_prog_$1"
 216 fi
 217 ]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS
 218
 219
 220 # Backported from Autoconf 2.5x; can go away when and if
 221 # we switch.  Put the OS path separator in $PATH_SEPARATOR.
 222 AC_DEFUN([ACX_PATH_SEP], [
 223 # The user is always right.
 224 if test "${PATH_SEPARATOR+set}" != set; then
 225   echo "#! /bin/sh" >conf$$.sh
 226   echo  "exit 0"   >>conf$$.sh
 227   chmod +x conf$$.sh
 228   if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
 229     PATH_SEPARATOR=';'
 230   else
 231     PATH_SEPARATOR=:
 232   fi
 233   rm -f conf$$.sh
 234 fi
 235 ])
 236
 237
 238 dnl ####
 239 dnl # GCC_BASE_VER
 240 dnl # Determine GCC version number to use in compiler directories.
 241
 242 AC_DEFUN([GCC_BASE_VER],
 243 [
 244   get_gcc_base_ver="cat"
 245   AC_ARG_WITH(gcc-major-version-only,
 246   [AS_HELP_STRING([--with-gcc-major-version-only], [use only GCC major number in filesystem paths])],
 247   [if test x$with_gcc_major_version_only = xyes ; then
 248     changequote(,)dnl
 249     get_gcc_base_ver="sed -e 's/^\([0-9]*\).*/\1/'"
 250     changequote([,])dnl
 251   fi
 252   ])
 253   AC_SUBST(get_gcc_base_ver)
 254 ])
 255
 256
 257 AC_DEFUN([ACX_TOOL_DIRS], [
 258 AC_REQUIRE([ACX_PATH_SEP])
 259 AC_REQUIRE([GCC_BASE_VER])
 260 if test "x$exec_prefix" = xNONE; then
 261         if test "x$prefix" = xNONE; then
 262                 gcc_cv_tool_prefix=$ac_default_prefix
 263         else
 264                 gcc_cv_tool_prefix=$prefix
 265         fi
 266 else
 267         gcc_cv_tool_prefix=$exec_prefix
 268 fi
 269
 270 # If there is no compiler in the tree, use the PATH only.  In any
 271 # case, if there is no compiler in the tree nobody should use
 272 # AS_FOR_TARGET and LD_FOR_TARGET.
 273 if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
 274     if test x$with_gcc_major_version_only = xyes ; then
 275         changequote(,)dnl
 276         gcc_version=`sed -e 's/^\([0-9]*\).*$/\1/' $srcdir/gcc/BASE-VER`
 277         changequote([,])dnl
 278     else
 279         gcc_version=`cat $srcdir/gcc/BASE-VER`
 280     fi
 281     gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
 282     gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
 283     gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
 284     gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
 285     gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
 286     gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
 287 else
 288     gcc_cv_tool_dirs=
 289 fi
 290
 291 if test x$build = x$target && test -n "$md_exec_prefix"; then
 292         gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
 293 fi
 294
 295 ]) []dnl # ACX_TOOL_DIRS
 296
 297 # ACX_HAVE_GCC_FOR_TARGET
 298 # Check if the variable GCC_FOR_TARGET really points to a GCC binary.
 299 AC_DEFUN([ACX_HAVE_GCC_FOR_TARGET], [
 300 cat > conftest.c << \EOF
 301 #ifdef __GNUC__
 302   gcc_yay;
 303 #endif
 304 EOF
 305 if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
 306   have_gcc_for_target=yes
 307 else
 308   GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
 309   have_gcc_for_target=no
 310 fi
 311 rm conftest.c
 312 ])
 313
 314 # ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
 315 # Searching for installed target binutils.  We need to take extra care,
 316 # else we may find the wrong assembler, linker, etc., and lose.
 317 #
 318 # First try --with-build-time-tools, if specified.
 319 #
 320 # For build != host, we ask the installed GCC for the name of the tool it
 321 # uses, and accept it if it is an absolute path.  This is because the
 322 # only good choice for a compiler is the same GCC version that is being
 323 # installed (or we couldn't make target libraries), and we assume that
 324 # on the host system we'll have not only the same GCC version, but also
 325 # the same binutils version.
 326 #
 327 # For build == host, search the same directories that the installed
 328 # compiler will search.  We used to do this for the assembler, linker,
 329 # and nm only; for simplicity of configuration, however, we extend this
 330 # criterion to tools (such as ar and ranlib) that are never invoked by
 331 # the compiler, to avoid mismatches.
 332 #
 333 # Also note we have to check MD_EXEC_PREFIX before checking the user's path
 334 # if build == target.  This makes the most sense only when bootstrapping,
 335 # but we also do so when build != host.  In this case, we hope that the
 336 # build and host systems will have similar contents of MD_EXEC_PREFIX.
 337 #
 338 # If we do not find a suitable binary, then try the user's path.
 339
 340 AC_DEFUN([ACX_CHECK_INSTALLED_TARGET_TOOL], [
 341 AC_REQUIRE([ACX_TOOL_DIRS])
 342 AC_REQUIRE([ACX_HAVE_GCC_FOR_TARGET])
 343 if test -z "$ac_cv_path_$1" ; then
 344   if test -n "$with_build_time_tools"; then
 345     AC_MSG_CHECKING([for $2 in $with_build_time_tools])
 346     if test -x $with_build_time_tools/$2; then
 347       $1=`cd $with_build_time_tools && pwd`/$2
 348       ac_cv_path_$1=[$]$1
 349       AC_MSG_RESULT([$ac_cv_path_$1])
 350     else
 351       AC_MSG_RESULT(no)
 352     fi
 353   elif test $build != $host && test $have_gcc_for_target = yes; then
 354     $1=`$GCC_FOR_TARGET --print-prog-name=$2`
 355     test [$]$1 = $2 && $1=
 356     test -n "[$]$1" && ac_cv_path_$1=[$]$1
 357   fi
 358 fi
 359 if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then
 360   AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs])
 361 fi
 362 if test -z "$ac_cv_path_$1" ; then
 363   NCN_STRICT_CHECK_TARGET_TOOLS([$1], [$2])
 364 else
 365   $1=$ac_cv_path_$1
 366 fi
 367 ]) []dnl # ACX_CHECK_INSTALLED_TARGET_TOOL
 368
 369 ###
 370 # AC_PROG_CPP_WERROR
 371 # Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
 372 # triggers warnings from the preprocessor.  Will be in autoconf 2.58.
 373 # For now, using this also overrides header checks to use only the
 374 # preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
 375 # bit harder from here).
 376 # Eventually autoconf will default to checking headers with the compiler
 377 # instead, and we'll have to do this differently.
 378
 379 AC_DEFUN([AC_PROG_CPP_WERROR],
 380 [AC_REQUIRE([AC_PROG_CPP])dnl
 381 m4_define([AC_CHECK_HEADER],m4_defn([_AC_CHECK_HEADER_OLD]))
 382 ac_c_preproc_warn_flag=yes])# AC_PROG_CPP_WERROR
 383
 384 # Test for GNAT.
 385 # We require the gnatbind & gnatmake programs, as well as a compiler driver
 386 # that understands Ada.  We use the user's CC setting, already found, and
 387 # possibly add $1 to the command-line parameters.
 388 #
 389 # Sets the shell variable have_gnat to yes or no as appropriate, and
 390 # substitutes GNATBIND and GNATMAKE.
 391 AC_DEFUN([ACX_PROG_GNAT],
 392 [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
 393 AC_REQUIRE([AC_PROG_CC])
 394 AC_CHECK_TOOL(GNATBIND, gnatbind, no)
 395 AC_CHECK_TOOL(GNATMAKE, gnatmake, no)
 396 AC_CACHE_CHECK([whether compiler driver understands Ada],
 397                  acx_cv_cc_gcc_supports_ada,
 398 [cat >conftest.adb <<EOF
 399 procedure conftest is begin null; end conftest;
 400 EOF
 401 acx_cv_cc_gcc_supports_ada=no
 402 # There is a bug in old released versions of GCC which causes the
 403 # driver to exit successfully when the appropriate language module
 404 # has not been installed.  This is fixed in 2.95.4, 3.0.2, and 3.1.
 405 # Therefore we must check for the error message as well as an
 406 # unsuccessful exit.
 407 # Other compilers, like HP Tru64 UNIX cc, exit successfully when
 408 # given a .adb file, but produce no object file.  So we must check
 409 # if an object file was really produced to guard against this.
 410 errors=`(${CC} $1[]m4_ifval([$1], [ ])-c conftest.adb) 2>&1 || echo failure`
 411 if test x"$errors" = x && test -f conftest.$ac_objext; then
 412   acx_cv_cc_gcc_supports_ada=yes
 413 fi
 414 rm -f conftest.*])
 415
 416 if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
 417   have_gnat=yes
 418 else
 419   have_gnat=no
 420 fi
 421 ])
 422
 423 # Test for D.
 424 AC_DEFUN([ACX_PROG_GDC],
 425 [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
 426 AC_REQUIRE([AC_PROG_CC])
 427 AC_CHECK_TOOL(GDC, gdc, no)
 428 if test "x$GDC" != xno; then
 429   have_gdc=yes
 430 else
 431   have_gdc=no
 432 fi
 433 ])
 434
 435 dnl 'make compare' can be significantly faster, if cmp itself can
 436 dnl skip bytes instead of using tail.  The test being performed is
 437 dnl "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
 438 dnl but we need to sink errors and handle broken shells.  We also test
 439 dnl for the parameter format "cmp file1 file2 skip1 skip2" which is
 440 dnl accepted by cmp on some systems.
 441 AC_DEFUN([ACX_PROG_CMP_IGNORE_INITIAL],
 442 [AC_CACHE_CHECK([how to compare bootstrapped objects], gcc_cv_prog_cmp_skip,
 443 [ echo abfoo >t1
 444   echo cdfoo >t2
 445   gcc_cv_prog_cmp_skip='tail -c +17 $$f1 > tmp-foo1; tail -c +17 $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
 446   if cmp t1 t2 2 2 > /dev/null 2>&1; then
 447     if cmp t1 t2 1 1 > /dev/null 2>&1; then
 448       :
 449     else
 450       gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
 451     fi
 452   fi
 453   if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
 454     if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
 455       :
 456     else
 457       gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
 458     fi
 459   fi
 460   rm t1 t2
 461 ])
 462 do_compare="$gcc_cv_prog_cmp_skip"
 463 AC_SUBST(do_compare)
 464 ])
 465
 466 dnl See whether we can include both string.h and strings.h.
 467 AC_DEFUN([ACX_HEADER_STRING],
 468 [AC_CACHE_CHECK([whether string.h and strings.h may both be included],
 469   gcc_cv_header_string,
 470 [AC_TRY_COMPILE([#include <string.h>
 471 #include <strings.h>], , gcc_cv_header_string=yes, gcc_cv_header_string=no)])
 472 if test $gcc_cv_header_string = yes; then
 473   AC_DEFINE(STRING_WITH_STRINGS, 1, [Define if you can safely include both <string.h> and <strings.h>.])
 474 fi
 475 ])
 476
 477 dnl See if stdbool.h properly defines bool and true/false.
 478 dnl Check whether _Bool is built-in.
 479 AC_DEFUN([ACX_HEADER_STDBOOL],
 480 [AC_CACHE_CHECK([for working stdbool.h],
 481   ac_cv_header_stdbool_h,
 482 [AC_TRY_COMPILE([#include <stdbool.h>],
 483 [bool foo = false;],
 484 ac_cv_header_stdbool_h=yes, ac_cv_header_stdbool_h=no)])
 485 if test $ac_cv_header_stdbool_h = yes; then
 486   AC_DEFINE(HAVE_STDBOOL_H, 1,
 487   [Define if you have a working <stdbool.h> header file.])
 488 fi
 489 AC_CACHE_CHECK(for built-in _Bool, gcc_cv_c__bool,
 490 [AC_TRY_COMPILE(,
 491 [_Bool foo;],
 492 gcc_cv_c__bool=yes, gcc_cv_c__bool=no)
 493 ])
 494 if test $gcc_cv_c__bool = yes; then
 495   AC_DEFINE(HAVE__BOOL, 1, [Define if the \`_Bool' type is built-in.])
 496 fi
 497 ])
 498
 499 dnl See if hard links work and if not, try to substitute $1 or simple copy.
 500 AC_DEFUN([ACX_PROG_LN],
 501 [AC_MSG_CHECKING(whether ln works)
 502 AC_CACHE_VAL(acx_cv_prog_LN,
 503 [rm -f conftestdata_t
 504 echo >conftestdata_f
 505 if ln conftestdata_f conftestdata_t 2>/dev/null
 506 then
 507   acx_cv_prog_LN=ln
 508 else
 509   acx_cv_prog_LN=no
 510 fi
 511 rm -f conftestdata_f conftestdata_t
 512 ])dnl
 513 if test $acx_cv_prog_LN = no; then
 514   LN="ifelse([$1],,cp,[$1])"
 515   AC_MSG_RESULT([no, using $LN])
 516 else
 517   LN="$acx_cv_prog_LN"
 518   AC_MSG_RESULT(yes)
 519 fi
 520 AC_SUBST(LN)dnl
 521 ])
 522
 523 dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
 524 AC_DEFUN([GCC_TARGET_TOOL],
 525 [AC_MSG_CHECKING(where to find the target $1)
 526 if test "x${build}" != "x${host}" ; then
 527   if expr "x[$]$2" : "x/" > /dev/null; then
 528     # We already found the complete path
 529     ac_dir=`dirname [$]$2`
 530     AC_MSG_RESULT(pre-installed in $ac_dir)
 531   else
 532     # Canadian cross, just use what we found
 533     AC_MSG_RESULT(pre-installed)
 534   fi
 535 else
 536   ifelse([$4],,,
 537   [ok=yes
 538   case " ${configdirs} " in
 539     *" patsubst([$4], [/.*], []) "*) ;;
 540     *) ok=no ;;
 541   esac
 542   ifelse([$5],,,
 543   [case ,${enable_languages}, in
 544     *,$5,*) ;;
 545     *) ok=no ;;
 546   esac])
 547   if test $ok = yes; then
 548     # An in-tree tool is available and we can use it
 549     $2='$$r/$(HOST_SUBDIR)/$4'
 550     AC_MSG_RESULT(just compiled)
 551   el])if expr "x[$]$2" : "x/" > /dev/null; then
 552     # We already found the complete path
 553     ac_dir=`dirname [$]$2`
 554     AC_MSG_RESULT(pre-installed in $ac_dir)
 555   elif test "x$target" = "x$host"; then
 556     # We can use an host tool
 557     $2='$($3)'
 558     AC_MSG_RESULT(host tool)
 559   else
 560     # We need a cross tool
 561     AC_MSG_RESULT(pre-installed)
 562   fi
 563 fi
 564 AC_SUBST($2)])
 565
 566
 567 dnl Locate a program and check that its version is acceptable.
 568 dnl ACX_PROG_CHECK_VER(var, name, version-switch,
 569 dnl                    version-extract-regexp, version-glob)
 570 AC_DEFUN([ACX_CHECK_PROG_VER],[
 571   AC_CHECK_PROG([$1], [$2], [$2])
 572   if test -n "[$]$1"; then
 573     # Found it, now check the version.
 574     AC_CACHE_CHECK([for modern $2],
 575                    [gcc_cv_prog_$2_modern],
 576                    [ac_prog_version=`eval [$]$1 $3 2>&1 |
 577                                      sed -n 's/^.*patsubst([[$4]],/,\/).*$/\1/p'`
 578
 579                     [case $ac_prog_version in
 580                       '')  gcc_cv_prog_$2_modern=no;;
 581                       $5)  gcc_cv_prog_$2_modern=yes;;
 582                       *)   gcc_cv_prog_$2_modern=no;;
 583                     esac]
 584                    ])
 585   else
 586     gcc_cv_prog_$2_modern=no
 587   fi
 588   if test $gcc_cv_prog_$2_modern = no; then
 589     $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2"
 590   fi
 591 ])
 592
 593 dnl Support the --with-pkgversion configure option.
 594 dnl ACX_PKGVERSION(default-pkgversion)
 595 AC_DEFUN([ACX_PKGVERSION],[
 596   AC_ARG_WITH(pkgversion,
 597     AS_HELP_STRING([--with-pkgversion=PKG],
 598                    [Use PKG in the version string in place of "$1"]),
 599     [case "$withval" in
 600       yes) AC_MSG_ERROR([package version not specified]) ;;
 601       no)  PKGVERSION= ;;
 602       *)   PKGVERSION="($withval) " ;;
 603      esac],
 604     PKGVERSION="($1) "
 605   )
 606   AC_SUBST(PKGVERSION)
 607 ])
 608
 609 dnl Support the --with-bugurl configure option.
 610 dnl ACX_BUGURL(default-bugurl)
 611 AC_DEFUN([ACX_BUGURL],[
 612   AC_ARG_WITH(bugurl,
 613     AS_HELP_STRING([--with-bugurl=URL],
 614                    [Direct users to URL to report a bug]),
 615     [case "$withval" in
 616       yes) AC_MSG_ERROR([bug URL not specified]) ;;
 617       no)  BUGURL=
 618            ;;
 619       *)   BUGURL="$withval"
 620            ;;
 621      esac],
 622      BUGURL="$1"
 623   )
 624   case ${BUGURL} in
 625   "")
 626     REPORT_BUGS_TO=
 627     REPORT_BUGS_TEXI=
 628     ;;
 629   *)
 630     REPORT_BUGS_TO="<$BUGURL>"
 631     REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
 632     ;;
 633   esac;
 634   AC_SUBST(REPORT_BUGS_TO)
 635   AC_SUBST(REPORT_BUGS_TEXI)
 636 ])
 637
 638 dnl ####
 639 dnl # ACX_CHECK_CYGWIN_CAT_WORKS
 640 dnl # On Cygwin hosts, check that the cat command ignores
 641 dnl # carriage returns as otherwise builds will not work.
 642 dnl # See binutils PR 4334 for more details.
 643 AC_DEFUN([ACX_CHECK_CYGWIN_CAT_WORKS],[
 644 AC_MSG_CHECKING([to see if cat works as expected])
 645 echo a >cygwin-cat-check
 646 if test `cat cygwin-cat-check` = a ; then
 647   rm cygwin-cat-check
 648   AC_MSG_RESULT(yes)
 649 else
 650   rm cygwin-cat-check
 651   AC_MSG_RESULT(no)
 652   AC_MSG_ERROR([The cat command does not ignore carriage return characters.
 653   Please either mount the build directory in binary mode or run the following
 654   commands before running any configure script:
 655 set -o igncr
 656 export SHELLOPTS
 657   ])
 658 fi
 659 ])