1 ###############################################################################
3 # Raspberry Pi - Videocore configuration file
5 ###############################################################################
8 ###############################################################################
10 # GPU Memory Settings (16,32,64 ... )
11 ###############################################################################
14 ###############################################################################
18 ###############################################################################
20 # Set this if monitor was not detected at reboot.
23 # hdmi_drive: 0 auto, 1 DVI (no Sound), 2 HDMI (Sound)
27 # sdtv_mode: 0 NTSC, 1 NTSC (JP), 3 PAL, 4 PAL (Brazil)
29 # sdtv_ascpect: 0 4:3, 1 14:9, 2 16:9
39 ###############################################################################
41 # Turbo Mode (cpufreq) Settings ...
42 # default clocks are arm=700, core=250 and sdram=400
44 ###############################################################################
50 # use following paramters to overclock at load
54 # higher clock than 900Mhz most need over voltage. Use with care.
57 ##############################################################################
59 # u-boot selection for different rpi boards
61 ##############################################################################
63 kernel=u-boot-rpi1.bin
65 kernel=u-boot-rpi2.bin
67 kernel=u-boot-rpi3.bin
69 kernel=u-boot-rpi4.bin
71 ##############################################################################