3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX
="debug-";;
34 -h*) TEST
="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options
=$options" $i" ;;
49 # First get uname entries that we use below
51 MACHINE
=`(uname -m) 2>/dev/null` || MACHINE
="unknown"
52 RELEASE
=`(uname -r) 2>/dev/null` || RELEASE
="unknown"
53 SYSTEM
=`(uname -s) 2>/dev/null` || SYSTEM
="unknown"
54 VERSION
=`(uname -v) 2>/dev/null` || VERSION
="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL
=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc
/kconfig
]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0
*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1
*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2
*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x7
*) echo "i586-sco-unixware7"; exit 0 ;;
97 x8
*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
103 # Now we simply scan though... In most cases, the SYSTEM info is enough
105 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
107 MACHINE
=`echo "$MACHINE" | sed -e 's/-/_/g'`
108 echo "parisc-hp-MPE/iX"; exit 0
111 echo "m68k-apple-aux3"; exit 0
115 echo "${MACHINE}-ibm-aix"; exit 0
119 echo "${MACHINE}-ibm-aix"; exit 0
123 echo "${MACHINE}-ibm-aix3"; exit 0
127 echo "${MACHINE}-dg-dgux"; exit 0
131 echo "${MACHINE}-hi-hiux"; exit 0
135 HPUXVER
=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
137 1[0-9].
*) # HPUX 10 and 11 targets are unified
138 echo "${MACHINE}-hp-hpux1x"; exit 0
141 echo "${MACHINE}-hp-hpux"; exit 0
147 echo "mips2-sgi-irix"; exit 0
151 echo "mips3-sgi-irix"; exit 0
155 echo "mips4-sgi-irix64"; exit 0
159 echo "${MACHINE}-whatever-linux2"; exit 0
163 echo "${MACHINE}-whatever-linux1"; exit 0
167 echo "hurd-x86"; exit 0;
171 echo "${MACHINE}-lynx-lynxos"; exit 0
174 BSD
/OS
:4.
*) # BSD/OS always says 386
175 echo "i486-whatever-bsdi4"; exit 0
178 BSD
/386:*:*:*486*|BSD
/OS
:*:*:*:*486*)
179 case `/sbin/sysctl -n hw.model` in
181 echo "i586-whatever-bsdi"; exit 0
184 echo "i386-whatever-bsdi"; exit 0
190 echo "${MACHINE}-whatever-bsdi"; exit 0
194 VERS
=`echo ${RELEASE} | sed -e 's/[-(].*//'`
195 MACH
=`sysctl -n hw.model`
198 *386* ) MACH
="i386" ;;
199 *486* ) MACH
="i486" ;;
200 Pentium\ II
*) MACH
="i686" ;;
201 Pentium
* ) MACH
="i586" ;;
202 * ) MACH
="$MACHINE" ;;
205 i
[0-9]86 ) ARCH
="pc" ;;
207 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
211 echo "${MACHINE}-whatever-freebsd"; exit 0
215 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
219 echo "${MACHINE}-whatever-netbsd"; exit 0
223 echo "${MACHINE}-whatever-openbsd"; exit 0
227 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
231 OSFMAJOR
=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
234 echo "${MACHINE}-dec-tru64"; exit 0
237 echo "${MACHINE}-dec-osf"; exit 0
240 echo "${MACHINE}-dec-osf"; exit 0
248 echo "${MACHINE}-whatever-qnx4"
251 echo "${MACHINE}-whatever-qnx6"
254 echo "${MACHINE}-whatever-qnx"
261 echo "i860-intel-osf1"; exit 0
265 echo "ppc-apple-rhapsody"; exit 0
271 echo "ppc-apple-darwin${VERSION}"
274 echo "i386-apple-darwin${VERSION}"
281 echo "${MACHINE}-whatever-solaris2"; exit 0
285 echo "${MACHINE}-sun-sunos4"; exit 0
289 echo "${MACHINE}-whatever-sysv4"; exit 0
293 echo "i386-stratus-vos"; exit 0
297 echo "hppa1.1-stratus-vos"; exit 0
301 echo "${MACHINE}-whatever-sysv4"; exit 0
305 echo "${MACHINE}-whatever-sysv4"; exit 0
308 *:4.0:3.0:3[34]?? |
*:4.0:3.0:3[34]??
,*)
309 echo "i486-ncr-sysv4"; exit 0
313 echo "${MACHINE}-unknown-ultrix"; exit 0
317 echo "${MACHINE}-siemens-sysv4"; exit 0
321 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
325 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
329 echo "${MACHINE}-ncr-sysv4"; exit 0
333 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
337 echo "mips-sony-newsos4"; exit 0;
343 echo "${MACHINE}-whatever-cygwin_pre1.3"
346 echo "${MACHINE}-whatever-cygwin"
353 echo "t3e-cray-unicosmk"; exit 0;
357 echo "j90-cray-unicos"; exit 0;
361 echo "nsr-tandem-nsk"; exit 0;
366 # Ugg. These are all we can determine by what we know about
367 # the output of uname. Be more creative:
370 # Do the Apollo stuff first. Here, we just simply assume
371 # that the existance of the /usr/apollo directory is proof
373 if [ -d /usr
/apollo
]; then
374 echo "whatever-apollo-whatever"
379 ISNEXT
=`hostinfo 2>/dev/null`
382 echo "whatever-next-nextstep3.3"; exit 0
385 echo "whatever-next-nextstep"; exit 0
389 # At this point we gone through all the one's
392 echo "${MACHINE}-whatever-${SYSTEM}"
396 # ---------------------------------------------------------------------------
397 # this is where the translation occurs into SSLeay terms
398 # ---------------------------------------------------------------------------
400 # figure out if gcc is available and if so we use it otherwise
401 # we fallback to whatever cc does on the system
402 GCCVER
=`(gcc -dumpversion) 2>/dev/null`
403 if [ "$GCCVER" != "" ]; then
405 # then strip off whatever prefix egcs prepends the number with...
406 # Hopefully, this will work for any future prefixes as well.
407 GCCVER
=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
408 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
409 # does give us what we want though, so we use that. We just just the
410 # major and minor version numbers.
411 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
412 GCCVER
=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
417 if [ "$SYSTEM" = "HP-UX" ];then
418 # By default gcc is a ILP32 compiler (with long long == 64).
420 if [ $GCCVER -ge 30 ]; then
421 # PA64 support only came in with gcc 3.0.x.
422 # We check if the preprocessor symbol __LP64__ is defined...
423 if echo "__LP64__" | gcc
-v -E -x c
- 2>/dev
/null |
grep "^__LP64__" 2>&1 > /dev
/null
; then
424 : # __LP64__ has slipped through, it therefore is not defined
430 if [ "$SYSTEM" = "SunOS" ]; then
431 if [ $GCCVER -ge 30 ]; then
432 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
433 # to be working, at the very least 'make test' passes...
434 if gcc
-v -E -x c
/dev
/null
2>&1 |
grep __arch64__
> /dev
/null
; then
440 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
441 CCVER
=`(cc -V 2>&1) 2>/dev/null | \
442 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
443 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
445 if [ $CCVER -gt 40 ]; then
446 CC
=cc
# overrides gcc!!!
447 if [ $CCVER -eq 50 ]; then
448 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
449 echo " patch #107357-01 or later applied."
452 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
457 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
458 # check for Compaq C, expected output is "blah-blah C Vx.x"
459 CCCVER
=`(ccc -V 2>&1) 2>/dev/null | \
460 egrep -e '.* C V[0-9]\.[0-9]' | \
461 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
463 if [ $CCCVER -gt 60 ]; then
464 CC
=ccc
# overrides gcc!!! well, ccc outperforms inoticeably
465 # only on hash routines and des, otherwise gcc (2.95)
466 # keeps along rather tight...
470 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
471 (cc
) 2>&1 |
grep -iv "not found" > /dev
/null
&& CC
=cc
476 # read the output of the embedded GuessOS
479 echo Operating system
: $GUESSOS
481 # now map the output into SSLeay terms ... really should hack into the
482 # script above so we end up with values in vars but that would take
483 # more time that I want to waste at the moment
486 CPU
=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
488 if [ $CPU -ge 4000 ]; then
489 options
="$options -mips2"
494 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
496 #if [ $CPU -ge 5000 ]; then
497 # options="$options -mips4"
499 # options="$options -mips3"
504 echo "WARNING! If you wish to build 64-bit library, then you have to"
505 echo " invoke './Configure irix64-mips4-$CC' *manually*."
506 if [ "$TEST" = "false" -a -t 1 ]; then
507 echo " You have about 5 seconds to press Ctrl-C to abort."
508 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
510 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
512 #if [ $CPU -ge 5000 ]; then
513 # options="$options -mips4"
515 # options="$options -mips3"
519 ppc-apple-rhapsody
) OUT
="rhapsody-ppc-cc" ;;
520 ppc-apple-darwin
*) OUT
="darwin-ppc-cc" ;;
521 i386-apple-darwin
*) OUT
="darwin-i386-cc" ;;
523 ISA
=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
524 case ${ISA:-generic} in
525 *[678]) OUT
="linux-alpha+bwx-$CC" ;;
526 *) OUT
="linux-alpha-$CC" ;;
528 if [ "$CC" = "gcc" ]; then
529 case ${ISA:-generic} in
530 EV5|EV45
) options
="$options -mcpu=ev5";;
531 EV56|PCA56
) options
="$options -mcpu=ev56";;
532 *) options
="$options -mcpu=ev6";;
537 echo "WARNING! If you wish to build 64-bit library, then you have to"
538 echo " invoke './Configure linux-ppc64' *manually*."
539 if [ "$TEST" = "false" -a -t 1 ]; then
540 echo " You have about 5 seconds to press Ctrl-C to abort."
541 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
545 ppc-
*-linux2) OUT
="linux-ppc" ;;
546 ia64-
*-linux?
) OUT
="linux-ia64" ;;
548 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
549 echo " and wish to build 64-bit library, then you have to"
550 echo " invoke './Configure linux64-sparcv9' *manually*."
551 if [ "$TEST" = "false" -a -t 1 ]; then
552 echo " You have about 5 seconds to press Ctrl-C to abort."
553 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
555 OUT
="linux-sparcv9" ;;
557 KARCH
=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
558 case ${KARCH:-sun4} in
559 sun4u
*) OUT
="linux-sparcv9" ;;
560 sun4m
) OUT
="linux-sparcv8" ;;
561 sun4d
) OUT
="linux-sparcv8" ;;
562 *) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
565 # 64-bit builds under parisc64 linux are not supported and
566 # compiler is expected to generate 32-bit objects...
567 CPUARCH
=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
568 CPUSCHEDULE
=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
570 # ??TODO ?? Model transformations
571 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
572 # assuming no further arch. identification will ever be used by GCC.
573 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
574 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
575 # for these chips in the future.
576 # PA7300LC -> 7100LC (1.1)
577 # PA8200 -> 8000 (2.0)
578 # PA8500 -> 8000 (2.0)
579 # PA8600 -> 8000 (2.0)
581 CPUSCHEDULE
=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
582 # Finish Model transformations
584 options
="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
585 OUT
="linux-generic32" ;;
586 arm
*b-
*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
587 arm
*l-
*-linux2) OUT
="linux-generic32"; options
="$options -DL_ENDIAN" ;;
588 s390
*-*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN -DNO_ASM" ;;
589 x86_64-
*-linux?
) OUT
="linux-x86_64" ;;
590 *86-*-linux2) OUT
="linux-elf"
591 if [ "$GCCVER" -gt 28 ]; then
592 if grep '^model.*Pentium' /proc
/cpuinfo
>/dev
/null
; then
593 options
="$options -mcpu=pentium"
595 if grep '^model.*Pentium Pro' /proc
/cpuinfo
>/dev
/null
; then
596 options
="$options -mcpu=pentiumpro"
598 if grep '^model.*K6' /proc
/cpuinfo
>/dev
/null
; then
599 options
="$options -mcpu=k6"
602 *-*-linux1) OUT
="linux-aout" ;;
603 *-*-linux2) OUT
="linux-generic32" ;;
605 OUT
="solaris-sparcv9-$CC"
606 ISA64
=`(isalist) 2>/dev/null | grep sparcv9`
607 if [ "$ISA64" != "" ]; then
608 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
609 echo "WARNING! If you wish to build 64-bit library, then you have to"
610 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
611 if [ "$TEST" = "false" -a -t 1 ]; then
612 echo " You have about 5 seconds to press Ctrl-C to abort."
613 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
615 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
616 # $GCC_ARCH denotes default ABI chosen by compiler driver
617 # (first one found on the $PATH). I assume that user
618 # expects certain consistency with the rest of his builds
619 # and therefore switch over to 64-bit. <appro>
620 OUT
="solaris64-sparcv9-gcc"
621 echo "WARNING! If you wish to build 32-bit library, then you have to"
622 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
623 if [ "$TEST" = "false" -a -t 1 ]; then
624 echo " You have about 5 seconds to press Ctrl-C to abort."
625 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
627 elif [ "$GCC_ARCH" = "-m32" ]; then
628 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
629 echo " and wish to build 64-bit library, then you have to"
630 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
631 if [ "$TEST" = "false" -a -t 1 ]; then
632 echo " You have about 5 seconds to press Ctrl-C to abort."
633 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
638 sun4m-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
639 sun4d-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
640 sun4
*-*-solaris2) OUT
="solaris-sparcv7-$CC" ;;
641 *86*-*-solaris2) OUT
="solaris-x86-$CC" ;;
642 *-*-sunos4) OUT
="sunos-$CC" ;;
644 *86*-*-bsdi4) OUT
="bsdi-elf-gcc" ;;
645 alpha
*-*-*bsd
*) OUT
="BSD-generic64; options="$options -DL_ENDIAN" ;;
646 powerpc64-*-*bsd*) OUT="BSD-generic64
; options
="$options -DB_ENDIAN" ;;
647 sparc64-
*-*bsd
*) OUT
="BSD-sparc64" ;;
648 ia64-
*-*bsd
*) OUT
="BSD-ia64" ;;
649 amd64-
*-*bsd
*) OUT
="BSD-x86_64" ;;
650 *86*-*-*bsd
*) case "`(file -L /usr/lib/libc.so.*) 2>/dev/null`" in
651 *ELF
*) OUT
="BSD-x86-elf" ;;
654 *-*-*bsd
*) OUT
="BSD-generic32" ;;
656 *-*-osf) OUT
="osf1-alpha-cc" ;;
657 *-*-tru64) OUT
="tru64-alpha-cc" ;;
659 if [ "$CC" = "gcc" ]; then
665 *-*-[Uu
]nix
[Ww
]are7
) OUT
="unixware-7" ;;
666 *-*-[Uu
]nix
[Ww
]are20
*) OUT
="unixware-2.0" ;;
667 *-*-[Uu
]nix
[Ww
]are21
*) OUT
="unixware-2.1" ;;
669 options
="$options no-threads no-shared no-asm no-dso"
672 BS2000-siemens-sysv4
) OUT
="BS2000-OSD" ;;
673 RM
*-siemens-sysv4) OUT
="ReliantUNIX" ;;
674 *-siemens-sysv4) OUT
="SINIX" ;;
676 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
677 OUT
="hpux64-parisc2-gcc"
679 KERNEL_BITS
=`(getconf KERNEL_BITS) 2>/dev/null`
680 KERNEL_BITS
=${KERNEL_BITS:-32}
681 CPU_VERSION
=`(getconf CPU_VERSION) 2>/dev/null`
682 CPU_VERSION
=${CPU_VERSION:-0}
683 # See <sys/unistd.h> for further info on CPU_VERSION.
684 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
685 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
686 echo " If you wish to build 32-bit library, the you have to"
687 echo " invoke './Configure hpux-ia64-cc' *manually*."
688 if [ "$TEST" = "false" -a -t 1 ]; then
689 echo " You have about 5 seconds to press Ctrl-C to abort."
690 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
693 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
694 OUT
=${OUT:-"hpux-parisc2-${CC}"}
695 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
696 echo "WARNING! If you wish to build 64-bit library then you have to"
697 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
698 if [ "$TEST" = "false" -a -t 1 ]; then
699 echo " You have about 5 seconds to press Ctrl-C to abort."
700 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
703 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
704 OUT
="hpux-parisc-${CC}
705 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
706 OUT="hpux-parisc-
${CC}
707 else # Motorola(?) CPU
710 options
="$options -D_REENTRANT" ;;
711 *-hpux) OUT
="hpux-parisc-$CC" ;;
713 KERNEL_BITS
=`(getconf KERNEL_BITMODE) 2>/dev/null`
714 KERNEL_BITS
=${KERNEL_BITS:-32}
715 OBJECT_MODE
=${OBJECT_MODE:-32}
716 if [ "$CC" = "gcc" ]; then
718 elif [ $OBJECT_MODE -eq 64 ]; then
719 echo 'Your $OBJECT_MODE was found to be set to 64'
723 if [ $KERNEL_BITS -eq 64 ]; then
724 echo "WARNING! If you wish to build 64-bit kit, then you have to"
725 echo " invoke './Configure aix64-cc' *manually*."
726 if [ "$TEST" = "false" -a -t 1 ]; then
727 echo " You have ~5 seconds to press Ctrl-C to abort."
728 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
733 # these are all covered by the catchall below
734 # *-dgux) OUT="dgux" ;;
735 mips-sony-newsos4
) OUT
="newsos4-gcc" ;;
736 *-*-cygwin_pre1.3
) OUT
="Cygwin-pre1.3" ;;
737 *-*-cygwin) OUT
="Cygwin" ;;
738 t3e-cray-unicosmk
) OUT
="cray-t3e" ;;
739 j90-cray-unicos
) OUT
="cray-j90" ;;
740 nsr-tandem-nsk
) OUT
="tandem-c89" ;;
741 *) OUT
=`echo $GUESSOS | awk -F- '{print $3}'`;;
744 # NB: This atalla support has been superceded by the ENGINE support
745 # That contains its own header and definitions anyway. Support can
746 # be enabled or disabled on any supported platform without external
747 # headers, eg. by adding the "hw-atalla" switch to ./config or
750 # See whether we can compile Atalla support
751 #if [ -f /usr/include/atasi.h ]
753 # options="$options -DATALLA"
756 # gcc < 2.8 does not support -mcpu=ultrasparc
757 if [ "$OUT" = solaris-sparcv9-gcc
-a $GCCVER -lt 28 ]
759 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
760 echo " Upgrade to gcc-2.8 or later."
762 OUT
=solaris-sparcv8-gcc
764 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
766 echo "WARNING! Falling down to 'linux-sparcv8'."
767 echo " Upgrade to gcc-2.8 or later."
773 i386-
*) options
="$options 386" ;;
776 for i
in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
778 if [ ! -d crypto
/$i ]
780 options
="$options no-$i"
784 # Discover Kerberos 5 (since it's still a prototype, we don't
785 # do any guesses yet, that's why this section is commented away.
786 #if [ -d /usr/kerberos ]; then
787 # krb5_dir=/usr/kerberos
788 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
789 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
790 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
791 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
792 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
793 # options="$options --with-krb5-flavor=MIT"
795 #elif [ -d /usr/heimdal ]; then
796 # krb5_dir=/usr/heimdal
797 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
798 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
799 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
800 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
801 # options="$options --with-krb5-flavor=Heimdal"
805 if [ -z "$OUT" ]; then
809 if [ ".$PERL" = .
] ; then
810 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
811 if [ -f "$i/perl5$EXE" ] ; then
818 if [ ".$PERL" = .
] ; then
819 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
820 if [ -f "$i/perl$EXE" ] ; then
821 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
829 if [ ".$PERL" = .
] ; then
830 echo "You need Perl 5."
834 # run Configure to check to see if we need to specify the
835 # compiler for the platform ... in which case we add it on
836 # the end ... otherwise we leave it off
838 $PERL .
/Configure LIST |
grep "$OUT-$CC" > /dev
/null
839 if [ $?
= "0" ]; then
845 $PERL .
/Configure LIST |
grep "$OUT" > /dev
/null
846 if [ $?
= "0" ]; then
847 echo Configuring
for $OUT
849 if [ "$TEST" = "true" ]; then
850 echo $PERL .
/Configure
$OUT $options
852 $PERL .
/Configure
$OUT $options
855 echo "This system ($OUT) is not supported. See file INSTALL for details."