3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX
="debug-";;
34 -h*) TEST
="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options
=$options" $i" ;;
49 # First get uname entries that we use below
51 MACHINE
=`(uname -m) 2>/dev/null` || MACHINE
="unknown"
52 RELEASE
=`(uname -r) 2>/dev/null` || RELEASE
="unknown"
53 SYSTEM
=`(uname -s) 2>/dev/null` || SYSTEM
="unknown"
54 VERSION
=`(uname -v) 2>/dev/null` || VERSION
="unknown"
60 # Check for VC++ presence first.
62 #if [ "x$MSVCDIR" != "x" -o "x$VCINSTALLDIR" != "x" ]; then
63 # perl Configure VC-WIN32 $*
64 # cmd /c ms\\do_masm.bat
65 # perl util/mk1mf.pl VC-WIN32-GMAKE >mak.tmp
68 # echo "Configured for VC++ using GNU make"
73 # Now test for ISC and SCO, since it is has a braindamaged uname.
75 # We need to work around FreeBSD 1.1.5.1
77 XREL
=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
78 if [ "x$XREL" != "x" ]; then
79 if [ -f /etc
/kconfig
]; then
82 echo "${MACHINE}-whatever-isc4"; exit 0
88 echo "whatever-whatever-sco3"; exit 0
91 echo "whatever-whatever-sco5"; exit 0
95 x2.0
*) echo "whatever-whatever-unixware20"; exit 0 ;;
96 x2.1
*) echo "whatever-whatever-unixware21"; exit 0 ;;
97 x2
*) echo "whatever-whatever-unixware2"; exit 0 ;;
101 echo "i386-whatever-unixware1"; exit 0
104 case "x${VERSION}" in
105 # We hardcode i586 in place of ${MACHINE} for the
106 # following reason. The catch is that even though Pentium
107 # is minimum requirement for platforms in question,
108 # ${MACHINE} gets always assigned to i386. Now, problem
109 # with i386 is that it makes ./config pass 386 to
110 # ./Configure, which in turn makes make generate
111 # inefficient SHA-1 (for this moment) code.
112 x7
*) echo "i586-sco-unixware7"; exit 0 ;;
113 x8
*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
119 # Now we simply scan though... In most cases, the SYSTEM info is enough
121 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
123 MACHINE
=`echo "$MACHINE" | sed -e 's/-/_/g'`
124 echo "parisc-hp-MPE/iX"; exit 0
127 echo "m68k-apple-aux3"; exit 0
131 echo "${MACHINE}-ibm-aix"; exit 0
135 echo "${MACHINE}-ibm-aix"; exit 0
139 echo "${MACHINE}-ibm-aix3"; exit 0
143 echo "${MACHINE}-dg-dgux"; exit 0
147 echo "${MACHINE}-hi-hiux"; exit 0
151 HPUXVER
=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
153 1[0-9].
*) # HPUX 10 and 11 targets are unified
154 echo "${MACHINE}-hp-hpux1x"; exit 0
157 echo "${MACHINE}-hp-hpux"; exit 0
163 echo "mips2-sgi-irix"; exit 0
167 echo "mips3-sgi-irix"; exit 0
171 echo "mips4-sgi-irix64"; exit 0
175 echo "${MACHINE}-whatever-linux2"; exit 0
179 echo "${MACHINE}-whatever-linux1"; exit 0
183 echo "hurd-x86"; exit 0;
187 echo "${MACHINE}-lynx-lynxos"; exit 0
190 BSD
/OS
:4.
*) # BSD/OS always says 386
191 echo "i486-whatever-bsdi4"; exit 0
194 BSD
/386:*:*:*486*|BSD
/OS
:*:*:*:*486*)
195 case `/sbin/sysctl -n hw.model` in
197 echo "i586-whatever-bsdi"; exit 0
200 echo "i386-whatever-bsdi"; exit 0
206 echo "${MACHINE}-whatever-bsdi"; exit 0
210 VERS
=`echo ${RELEASE} | sed -e 's/[-(].*//'`
211 MACH
=`sysctl -n hw.model`
214 *386* ) MACH
="i386" ;;
215 *486* ) MACH
="i486" ;;
216 Pentium\ II
*) MACH
="i686" ;;
217 Pentium
* ) MACH
="i586" ;;
218 * ) MACH
="$MACHINE" ;;
221 i
[0-9]86 ) ARCH
="pc" ;;
223 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
227 echo "${MACHINE}-whatever-freebsd"; exit 0
231 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
235 echo "${MACHINE}-whatever-netbsd"; exit 0
239 echo "${MACHINE}-whatever-openbsd"; exit 0
243 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
247 OSFMAJOR
=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
250 echo "${MACHINE}-dec-tru64"; exit 0
253 echo "${MACHINE}-dec-osf"; exit 0
256 echo "${MACHINE}-dec-osf"; exit 0
264 echo "${MACHINE}-whatever-qnx4"
267 echo "${MACHINE}-whatever-qnx6"
270 echo "${MACHINE}-whatever-qnx"
277 echo "i860-intel-osf1"; exit 0
281 echo "ppc-apple-rhapsody"; exit 0
287 echo "ppc-apple-darwin${VERSION}"
290 echo "i386-apple-darwin${VERSION}"
297 echo "${MACHINE}-whatever-solaris2"; exit 0
301 echo "${MACHINE}-sun-sunos4"; exit 0
305 echo "${MACHINE}-whatever-sysv4"; exit 0
309 echo "i386-stratus-vos"; exit 0
313 echo "hppa1.1-stratus-vos"; exit 0
317 echo "${MACHINE}-whatever-sysv4"; exit 0
321 echo "${MACHINE}-whatever-sysv4"; exit 0
324 *:4.0:3.0:3[34]?? |
*:4.0:3.0:3[34]??
,*)
325 echo "i486-ncr-sysv4"; exit 0
329 echo "${MACHINE}-unknown-ultrix"; exit 0
333 echo "${MACHINE}-siemens-sysv4"; exit 0
337 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
341 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
345 echo "${MACHINE}-ncr-sysv4"; exit 0
349 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
353 echo "mips-sony-newsos4"; exit 0;
357 echo "${MACHINE}-whatever-mingw"; echo 0;
358 # Save fipslib path so VC++ build can find it
359 (cd /usr
/local
/ssl
/lib
; pwd -W ) > util
/fipslib_path.txt
360 # Extract _chkstk.o so VC++ can use it, to avoid __alloca link error
361 (cd ms
; ar x
`gcc -print-libgcc-file-name` _chkstk.o
)
366 echo "${MACHINE}-whatever-cygwin_pre1.3"
369 echo "${MACHINE}-whatever-cygwin"
376 echo "t3e-cray-unicosmk"; exit 0;
380 echo "j90-cray-unicos"; exit 0;
384 echo "nsr-tandem-nsk"; exit 0;
389 # Ugg. These are all we can determine by what we know about
390 # the output of uname. Be more creative:
393 # Do the Apollo stuff first. Here, we just simply assume
394 # that the existance of the /usr/apollo directory is proof
396 if [ -d /usr
/apollo
]; then
397 echo "whatever-apollo-whatever"
402 ISNEXT
=`hostinfo 2>/dev/null`
405 echo "whatever-next-nextstep3.3"; exit 0
408 echo "whatever-next-nextstep"; exit 0
412 # At this point we gone through all the one's
415 echo "${MACHINE}-whatever-${SYSTEM}"
419 # ---------------------------------------------------------------------------
420 # this is where the translation occurs into SSLeay terms
421 # ---------------------------------------------------------------------------
423 # figure out if gcc is available and if so we use it otherwise
424 # we fallback to whatever cc does on the system
425 GCCVER
=`(gcc -dumpversion) 2>/dev/null`
426 if [ "$GCCVER" != "" ]; then
428 # then strip off whatever prefix egcs prepends the number with...
429 # Hopefully, this will work for any future prefixes as well.
430 GCCVER
=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
431 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
432 # does give us what we want though, so we use that. We just just the
433 # major and minor version numbers.
434 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
435 GCCVER
=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
440 if [ "$SYSTEM" = "HP-UX" ];then
441 # By default gcc is a ILP32 compiler (with long long == 64).
443 if [ $GCCVER -ge 30 ]; then
444 # PA64 support only came in with gcc 3.0.x.
445 # We check if the preprocessor symbol __LP64__ is defined...
446 if echo "__LP64__" | gcc
-v -E -x c
- 2>/dev
/null |
grep "^__LP64__" 2>&1 > /dev
/null
; then
447 : # __LP64__ has slipped through, it therefore is not defined
453 if [ "$SYSTEM" = "SunOS" ]; then
454 if [ $GCCVER -ge 30 ]; then
455 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
456 # to be working, at the very least 'make test' passes...
457 if gcc
-v -E -x c
/dev
/null
2>&1 |
grep __arch64__
> /dev
/null
; then
463 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
464 CCVER
=`(cc -V 2>&1) 2>/dev/null | \
465 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
466 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
468 if [ $MACHINE != i86pc
-a $CCVER -gt 40 ]; then
469 CC
=cc
# overrides gcc!!!
470 if [ $CCVER -eq 50 ]; then
471 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
472 echo " patch #107357-01 or later applied."
475 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
480 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
481 # check for Compaq C, expected output is "blah-blah C Vx.x"
482 CCCVER
=`(ccc -V 2>&1) 2>/dev/null | \
483 egrep -e '.* C V[0-9]\.[0-9]' | \
484 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
486 if [ $CCCVER -gt 60 ]; then
487 CC
=ccc
# overrides gcc!!! well, ccc outperforms inoticeably
488 # only on hash routines and des, otherwise gcc (2.95)
489 # keeps along rather tight...
493 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
494 (cc
) 2>&1 |
grep -iv "not found" > /dev
/null
&& CC
=cc
499 # read the output of the embedded GuessOS
502 echo Operating system
: $GUESSOS
504 # now map the output into SSLeay terms ... really should hack into the
505 # script above so we end up with values in vars but that would take
506 # more time that I want to waste at the moment
509 CPU
=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
511 if [ $CPU -ge 4000 ]; then
512 options
="$options -mips2"
517 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
519 #if [ $CPU -ge 5000 ]; then
520 # options="$options -mips4"
522 # options="$options -mips3"
527 echo "WARNING! If you wish to build 64-bit library, then you have to"
528 echo " invoke './Configure irix64-mips4-$CC' *manually*."
529 if [ "$TEST" = "false" -a -t 1 ]; then
530 echo " You have about 5 seconds to press Ctrl-C to abort."
531 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
533 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
535 #if [ $CPU -ge 5000 ]; then
536 # options="$options -mips4"
538 # options="$options -mips3"
543 ISA
=`awk '/cpu model/{print$4}' /proc/cpuinfo`
544 case ${ISA:-generic} in
545 *[67]) OUT
="linux-alpha+bwx-$CC" ;;
546 *) OUT
="linux-alpha-$CC" ;;
548 if [ "$CC" = "gcc" ]; then
549 case ${ISA:-generic} in
550 EV5|EV45
) options
="$options -march=ev5";;
551 EV56|PCA56
) options
="$options -march=ev56";;
552 EV6|EV67|PCA57
) options
="$options -march=ev6";;
558 #include <stdio.h> /* for printf() prototype */
559 int main (argc, argv) int argc; char *argv[]; {
561 printf ("linux-%s\n", argv[1]);
564 printf ("linux-%sel\n", argv[1]);
569 ${CC} -o dummy dummy.c
&& OUT
=`./dummy ${MACHINE}`
573 echo "WARNING! If you wish to build 64-bit library, then you have to"
574 echo " invoke './Configure linux-ppc64' *manually*."
575 if [ "$TEST" = "false" -a -t 1 ]; then
576 echo " You have about 5 seconds to press Ctrl-C to abort."
577 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
581 ppc-
*-linux2) OUT
="linux-ppc" ;;
582 m68k-
*-linux*) OUT
="linux-m68k" ;;
583 ia64-
*-linux?
) OUT
="linux-ia64" ;;
584 ppc-apple-rhapsody
) OUT
="rhapsody-ppc-cc" ;;
585 ppc-apple-darwin
*) OUT
="darwin-ppc-cc" ;;
586 i386-apple-darwin
*) OUT
="darwin-i386-cc" ;;
588 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
589 echo " and wish to build 64-bit library, then you have to"
590 echo " invoke './Configure linux64-sparcv9' *manually*."
591 if [ "$TEST" = "false" -a -t 1 ]; then
592 echo " You have about 5 seconds to press Ctrl-C to abort."
593 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
595 OUT
="linux-sparcv9" ;;
597 KARCH
=`awk '/^type/{print$3}' /proc/cpuinfo`
598 case ${KARCH:-sun4} in
599 sun4u
*) OUT
="linux-sparcv9" ;;
600 sun4m
) OUT
="linux-sparcv8" ;;
601 sun4d
) OUT
="linux-sparcv8" ;;
602 *) OUT
="linux-sparcv7" ;;
605 CPUARCH
=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
606 CPUSCHEDULE
=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
608 # ??TODO ?? Model transformations
609 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
610 # assuming no further arch. identification will ever be used by GCC.
611 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
612 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
613 # for these chips in the future.
614 # PA7300LC -> 7100LC (1.1)
615 # PA8200 -> 8000 (2.0)
616 # PA8500 -> 8000 (2.0)
617 # PA8600 -> 8000 (2.0)
619 CPUSCHEDULE
=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
620 # Finish Model transformations
622 options
="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
623 OUT
="linux-parisc" ;;
624 arm
*b-
*-linux2) OUT
="linux-elf-arm"; options
="$options -DB_ENDIAN" ;;
625 arm
*l-
*-linux2) OUT
="linux-elf-arm"; options
="$options -DL_ENDIAN" ;;
626 arm
*-*-linux2) OUT
="linux-elf-arm" ;;
627 s390-
*-linux2) OUT
="linux-s390" ;;
628 s390x-
*-linux?
) OUT
="linux-s390x" ;;
629 x86_64-
*-linux?
) OUT
="linux-x86_64" ;;
630 *-*-linux2) OUT
="linux-elf"
631 if [ "$GCCVER" -gt 28 ]; then
632 if grep '^model.*Pentium' /proc
/cpuinfo
>/dev
/null
; then
635 if grep '^model.*Pentium Pro' /proc
/cpuinfo
>/dev
/null
; then
638 if grep '^model.*K6' /proc
/cpuinfo
>/dev
/null
; then
642 *-*-linux1) OUT
="linux-aout" ;;
644 OUT
="solaris-sparcv9-$CC"
645 ISA64
=`(isalist) 2>/dev/null | grep sparcv9`
646 if [ "$ISA64" != "" ]; then
647 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
648 echo "WARNING! If you wish to build 64-bit library, then you have to"
649 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
650 if [ "$TEST" = "false" -a -t 1 ]; then
651 echo " You have about 5 seconds to press Ctrl-C to abort."
652 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
654 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
655 # $GCC_ARCH denotes default ABI chosen by compiler driver
656 # (first one found on the $PATH). I assume that user
657 # expects certain consistency with the rest of his builds
658 # and therefore switch over to 64-bit. <appro>
659 OUT
="solaris64-sparcv9-gcc"
660 echo "WARNING! If you wish to build 32-bit library, then you have to"
661 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
662 if [ "$TEST" = "false" -a -t 1 ]; then
663 echo " You have about 5 seconds to press Ctrl-C to abort."
664 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
666 elif [ "$GCC_ARCH" = "-m32" ]; then
667 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
668 echo " and wish to build 64-bit library, then you have to"
669 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
670 if [ "$TEST" = "false" -a -t 1 ]; then
671 echo " You have about 5 seconds to press Ctrl-C to abort."
672 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
677 sun4m-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
678 sun4d-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
679 sun4
*-*-solaris2) OUT
="solaris-sparcv7-$CC" ;;
681 ISA64
=`(isalist) 2>/dev/null | grep amd64`
682 if [ "$ISA64" != "" ]; then
683 OUT
="solaris64-x86_64-$CC"
685 OUT
="solaris-x86-$CC"
688 *-*-sunos4) OUT
="sunos-$CC" ;;
689 alpha
*-*-freebsd*) OUT
="FreeBSD-alpha" ;;
690 sparc64-
*-freebsd*) OUT
="FreeBSD-sparc64" ;;
691 ia64-
*-freebsd*) OUT
="FreeBSD-ia64" ;;
692 *-freebsd[3-9]*) OUT
="FreeBSD-elf" ;;
693 *-freebsd[1-2]*) OUT
="FreeBSD" ;;
694 *86*-*-netbsd) OUT
="NetBSD-x86" ;;
695 sun3
*-*-netbsd) OUT
="NetBSD-m68" ;;
696 *-*-netbsd) OUT
="NetBSD-sparc" ;;
697 alpha
*-*-openbsd) OUT
="OpenBSD-alpha" ;;
698 *86*-*-openbsd) OUT
="OpenBSD-i386" ;;
699 m68k
*-*-openbsd) OUT
="OpenBSD-m68k" ;;
700 m88k
*-*-openbsd) OUT
="OpenBSD-m88k" ;;
701 mips
*-*-openbsd) OUT
="OpenBSD-mips" ;;
702 pmax
*-*-openbsd) OUT
="OpenBSD-mips" ;;
703 powerpc
*-*-openbsd) OUT
="OpenBSD-powerpc" ;;
704 sparc64
*-*-openbsd) OUT
="OpenBSD-sparc64" ;;
705 sparc
*-*-openbsd) OUT
="OpenBSD-sparc" ;;
706 vax
*-*-openbsd) OUT
="OpenBSD-vax" ;;
707 hppa
*-*-openbsd) OUT
="OpenBSD-hppa" ;;
708 *-*-openbsd) OUT
="OpenBSD" ;;
709 *86*-*-bsdi4) OUT
="bsdi-elf-gcc" ;;
710 *-*-osf) OUT
="alphaold-cc" ;;
711 *-*-tru64) OUT
="alpha-cc" ;;
713 if [ "$CC" = "gcc" ]; then
719 *-*-unixware7) OUT
="unixware-7" ;;
720 *-*-UnixWare7) OUT
="unixware-7" ;;
721 *-*-Unixware7) OUT
="unixware-7" ;;
722 *-*-unixware20*) OUT
="unixware-2.0" ;;
723 *-*-unixware21*) OUT
="unixware-2.1" ;;
724 *-*-UnixWare20*) OUT
="unixware-2.0" ;;
725 *-*-UnixWare21*) OUT
="unixware-2.1" ;;
726 *-*-Unixware20*) OUT
="unixware-2.0" ;;
727 *-*-Unixware21*) OUT
="unixware-2.1" ;;
729 options
="$options no-threads no-shared no-asm no-dso"
732 BS2000-siemens-sysv4
) OUT
="BS2000-OSD" ;;
733 RM
*-siemens-sysv4) OUT
="ReliantUNIX" ;;
734 *-siemens-sysv4) OUT
="SINIX" ;;
738 if [ $GCC_BITS = "64" ]; then
739 OUT
="hpux64-parisc2-gcc"
741 OUT
="hpux-parisc-gcc"
744 OUT
="hpux-parisc-$CC"
746 KERNEL_BITS
=`(getconf KERNEL_BITS) 2>/dev/null`
747 KERNEL_BITS
=${KERNEL_BITS:-32}
748 CPU_VERSION
=`(getconf CPU_VERSION) 2>/dev/null`
749 CPU_VERSION
=${CPU_VERSION:-0}
750 # See <sys/unistd.h> for further info on CPU_VERSION.
751 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
752 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
753 echo " If you wish to build 32-bit library, the you have to"
754 echo " invoke './Configure hpux-ia64-cc' *manually*."
755 if [ "$TEST" = "false" -a -t 1 ]; then
756 echo " You have about 5 seconds to press Ctrl-C to abort."
757 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
760 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
761 if [ "$CC" = "cc" ]; then
762 OUT
="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
764 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
765 echo "WARNING! If you wish to build 64-bit library then you have to"
766 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
767 if [ "$TEST" = "false" -a -t 1 ]; then
768 echo " You have about 5 seconds to press Ctrl-C to abort."
769 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
772 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
774 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
776 else # Motorola(?) CPU
779 options
="$options -D_REENTRANT" ;;
780 *-hpux) OUT
="hpux-parisc-$CC" ;;
782 KERNEL_BITS
=`(getconf KERNEL_BITMODE) 2>/dev/null`
783 KERNEL_BITS
=${KERNEL_BITS:-32}
784 OBJECT_MODE
=${OBJECT_MODE:-32}
785 if [ "$CC" = "gcc" ]; then
787 elif [ $OBJECT_MODE -eq 64 ]; then
788 echo 'Your $OBJECT_MODE was found to be set to 64'
792 if [ $KERNEL_BITS -eq 64 ]; then
793 echo "WARNING! If you wish to build 64-bit kit, then you have to"
794 echo " invoke './Configure aix64-cc' *manually*."
795 if [ "$TEST" = "false" -a -t 1 ]; then
796 echo " You have ~5 seconds to press Ctrl-C to abort."
797 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
802 # these are all covered by the catchall below
803 # *-dgux) OUT="dgux" ;;
804 mips-sony-newsos4
) OUT
="newsos4-gcc" ;;
805 *-*-cygwin_pre1.3
) OUT
="Cygwin-pre1.3" ;;
806 *-*-cygwin) OUT
="Cygwin" ;;
807 t3e-cray-unicosmk
) OUT
="cray-t3e" ;;
808 j90-cray-unicos
) OUT
="cray-j90" ;;
809 nsr-tandem-nsk
) OUT
="tandem-c89" ;;
810 *) OUT
=`echo $GUESSOS | awk -F- '{print $3}'`;;
813 # NB: This atalla support has been superceded by the ENGINE support
814 # That contains its own header and definitions anyway. Support can
815 # be enabled or disabled on any supported platform without external
816 # headers, eg. by adding the "hw-atalla" switch to ./config or
819 # See whether we can compile Atalla support
820 #if [ -f /usr/include/atasi.h ]
822 # options="$options -DATALLA"
825 # gcc < 2.8 does not support -march=ultrasparc
826 if [ "$OUT" = solaris-sparcv9-gcc
-a $GCCVER -lt 28 ]
828 echo "WARNING! Do consider upgrading to gcc-2.8 or later."
830 OUT
=solaris-sparcv9-gcc27
832 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
834 echo "WARNING! Falling down to 'linux-sparcv8'."
835 echo " Upgrade to gcc-2.8 or later."
841 i386-
*) options
="$options 386" ;;
844 for i
in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
846 if [ ! -d crypto
/$i ]
848 options
="$options no-$i"
852 # Discover Kerberos 5 (since it's still a prototype, we don't
853 # do any guesses yet, that's why this section is commented away.
854 #if [ -d /usr/kerberos ]; then
855 # krb5_dir=/usr/kerberos
856 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
857 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
858 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
859 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
860 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
861 # options="$options --with-krb5-flavor=MIT"
863 #elif [ -d /usr/heimdal ]; then
864 # krb5_dir=/usr/heimdal
865 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
866 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
867 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
868 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
869 # options="$options --with-krb5-flavor=Heimdal"
873 if [ -z "$OUT" ]; then
877 if [ ".$PERL" = .
] ; then
878 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
879 if [ -f "$i/perl5$EXE" ] ; then
886 if [ ".$PERL" = .
] ; then
887 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
888 if [ -f "$i/perl$EXE" ] ; then
889 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
897 if [ ".$PERL" = .
] ; then
898 echo "You need Perl 5."
902 # run Configure to check to see if we need to specify the
903 # compiler for the platform ... in which case we add it on
904 # the end ... otherwise we leave it off
906 $PERL .
/Configure LIST |
grep "$OUT-$CC" > /dev
/null
907 if [ $?
= "0" ]; then
913 $PERL .
/Configure LIST |
grep "$OUT" > /dev
/null
914 if [ $?
= "0" ]; then
915 echo Configuring
for $OUT
917 if [ "$TEST" = "true" ]; then
918 echo $PERL .
/Configure
$OUT $options
920 $PERL .
/Configure
$OUT $options
923 echo "This system ($OUT) is not supported. See file INSTALL for details."