3 # Generator script for a dracut initramfs
5 # Copyright 2005-2013 Red Hat, Inc. All rights reserved.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
26 # Verify bash version, current minimum is 4
27 if ((BASH_VERSINFO
[0] < 4)); then
28 printf -- 'You need at least Bash 4 to use dracut, sorry.' >&2
33 # shellcheck disable=SC2155
34 readonly dracut_cmd
=$
(readlink
-f "$0")
39 [[ $sysroot_l ]] && dracutsysrootdir
="$sysroot_l"
40 [[ $dracutbasedir ]] || dracutbasedir
="$dracutsysrootdir"/usr
/lib
/dracut
41 if [[ -f $dracutbasedir/dracut-version.sh
]]; then
42 # shellcheck source=./dracut-version.sh
43 .
"$dracutbasedir"/dracut-version.sh
46 # 80x25 linebreak here ^
48 Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]]
50 Version: $DRACUT_VERSION
52 Creates initial ramdisk images for preloading modules
54 -h, --help Display all options
56 If a [LIST] has multiple arguments, then you have to put these in quotes.
60 # dracut --add-drivers "module1 module2" ...
66 [[ $dracutbasedir ]] || dracutbasedir
="$dracutsysrootdir"/usr
/lib
/dracut
67 if [[ -f $dracutbasedir/dracut-version.sh
]]; then
68 # shellcheck source=./dracut-version.sh
69 .
"$dracutbasedir"/dracut-version.sh
72 # 80x25 linebreak here ^
74 Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]]
76 Version: $DRACUT_VERSION
78 Creates initial ramdisk images for preloading modules
80 --kver [VERSION] Set kernel version to [VERSION].
81 -f, --force Overwrite existing initramfs file.
82 [OUTPUT_FILE] --rebuild
83 Append the current arguments to those with which the
84 input initramfs image was built. This option helps in
85 incrementally building the initramfs for testing.
86 If optional [OUTPUT_FILE] is not provided, the input
87 initramfs provided to rebuild will be used as output
89 -a, --add [LIST] Add a space-separated list of dracut modules.
90 --force-add [LIST] Force to add a space-separated list of dracut modules
91 to the default set of modules, when -H is specified.
92 -o, --omit [LIST] Omit a space-separated list of dracut modules.
93 -m, --modules [LIST] Specify a space-separated list of dracut modules to
94 call when building the initramfs. Modules are located
95 in /usr/lib/dracut/modules.d.
96 This option forces dracut to only include the specified
98 In most cases the --add option is what you want to use.
99 --add-drivers [LIST] Specify a space-separated list of kernel
100 modules to add to the initramfs.
101 --force-drivers [LIST]
102 Specify a space-separated list of kernel
103 modules to add to the initramfs and make sure they
104 are tried to be loaded via modprobe same as passing
105 rd.driver.pre=DRIVER kernel parameter.
106 --omit-drivers [LIST] Specify a space-separated list of kernel
107 modules not to add to the initramfs.
108 -d, --drivers [LIST] Specify a space-separated list of kernel modules to
109 exclusively include in the initramfs.
110 --filesystems [LIST] Specify a space-separated list of kernel filesystem
111 modules to exclusively include in the generic
113 -k, --kmoddir [DIR] Specify the directory where to look for kernel
115 --fwdir [DIR] Specify additional colon-separated list of directories
116 where to look for firmware files.
117 --libdirs [LIST] Specify a space-separated list of directories
118 where to look for libraries.
119 --kernel-only Only install kernel drivers and firmware files.
120 --no-kernel Do not install kernel drivers and firmware files.
121 --print-cmdline Print the kernel command line for the given disk layout.
122 --early-microcode Combine early microcode with ramdisk.
123 --no-early-microcode Do not combine early microcode with ramdisk.
124 --kernel-cmdline [PARAMETERS]
125 Specify default kernel command line parameters.
126 --strip Strip binaries in the initramfs.
127 --aggressive-strip Strip more than just debug symbol and sections,
128 for a smaller initramfs build. The --strip option must
130 --nostrip Do not strip binaries in the initramfs.
131 --hardlink Hardlink files in the initramfs.
132 --nohardlink Do not hardlink files in the initramfs.
133 --prefix [DIR] Prefix initramfs files with [DIR].
134 --noprefix Do not prefix initramfs files.
135 --mdadmconf Include local /etc/mdadm.conf file.
136 --nomdadmconf Do not include local /etc/mdadm.conf file.
137 --lvmconf Include local /etc/lvm/lvm.conf file.
138 --nolvmconf Do not include local /etc/lvm/lvm.conf file.
139 --fscks [LIST] Add a space-separated list of fsck helpers.
140 --nofscks Inhibit installation of any fsck helpers.
141 --ro-mnt Mount / and /usr read-only by default.
142 -h, --help This message.
143 --debug Output debug information of the build process.
144 --profile Output profile information of the build process.
145 -L, --stdlog [0-6] Specify logging level (to standard error)
146 0 - suppress any messages
147 1 - only fatal errors
151 5 - debug info (here starts lots of output)
152 6 - trace info (and even more)
153 -v, --verbose Increase verbosity level.
154 -q, --quiet Decrease verbosity level.
155 -c, --conf [FILE] Specify configuration file to use.
156 Default: /etc/dracut.conf
157 --confdir [DIR] Specify configuration directory to use *.conf files
158 from. Default: /etc/dracut.conf.d
159 --tmpdir [DIR] Temporary directory to be used instead of default
161 -r, --sysroot [DIR] Specify sysroot directory to collect files from.
162 -l, --local Local mode. Use modules from the current working
163 directory instead of the system-wide installed in
164 /usr/lib/dracut/modules.d.
165 Useful when running dracut from a git checkout.
166 -H, --hostonly Host-only mode: Install only what is needed for
167 booting the local host instead of a generic host.
168 -N, --no-hostonly Disables host-only mode.
169 --hostonly-mode [MODE]
170 Specify the host-only mode to use. [MODE] could be
171 one of "sloppy" or "strict". "sloppy" mode is used
173 In "sloppy" host-only mode, extra drivers and modules
174 will be installed, so minor hardware change won't make
175 the image unbootable (e.g. changed keyboard), and the
176 image is still portable among similar hosts.
177 With "strict" mode enabled, anything not necessary
178 for booting the local host in its current state will
179 not be included, and modules may do some extra job
180 to save more space. Minor change of hardware or
181 environment could make the image unbootable.
182 DO NOT use "strict" mode unless you know what you
184 --hostonly-cmdline Store kernel command line arguments needed
186 --no-hostonly-cmdline Do not store kernel command line arguments needed
188 --no-hostonly-default-device
189 Do not generate implicit host devices like root,
190 swap, fstab, etc. Use "--mount" or "--add-device"
191 to explicitly add devices as needed.
192 --hostonly-i18n Install only needed keyboard and font files according
193 to the host configuration (default).
194 --no-hostonly-i18n Install all keyboard and font files available.
195 --hostonly-nics [LIST]
196 Only enable listed NICs in the initramfs. The list can
197 be empty, so other modules can install only the
198 necessary network drivers.
199 --persistent-policy [POLICY]
200 Use [POLICY] to address disks and partitions.
201 POLICY can be any directory name found in /dev/disk.
202 E.g. "by-uuid", "by-label"
203 --fstab Use /etc/fstab to determine the root device.
204 --add-fstab [FILE] Add file to the initramfs fstab.
205 --mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
206 Mount device [DEV] on mountpoint [MP] with filesystem
207 [FSTYPE] and options [FSOPTS] in the initramfs.
208 --mount "[MP]" Same as above, but [DEV], [FSTYPE] and [FSOPTS] are
209 determined by looking at the current mounts.
210 --add-device "[DEV]" Bring up [DEV] in initramfs.
211 -i, --include [SOURCE] [TARGET]
212 Include the files in the SOURCE directory into the
213 Target directory in the final initramfs.
214 If SOURCE is a file, it will be installed to TARGET
215 in the final initramfs.
216 -I, --install [LIST] Install the space separated list of files into the
218 --install-optional [LIST]
219 Install the space separated list of files into the
220 initramfs, if they exist.
221 --gzip Compress the generated initramfs using gzip.
222 This will be done by default, unless another
223 compression option or --no-compress is passed.
224 --bzip2 Compress the generated initramfs using bzip2.
225 Make sure your kernel has bzip2 decompression support
226 compiled in, otherwise you will not be able to boot.
227 --lzma Compress the generated initramfs using lzma.
228 Make sure your kernel has lzma support compiled in,
229 otherwise you will not be able to boot.
230 --xz Compress the generated initramfs using xz.
231 Make sure that your kernel has xz support compiled
232 in, otherwise you will not be able to boot.
233 --lzo Compress the generated initramfs using lzop.
234 Make sure that your kernel has lzo support compiled
235 in, otherwise you will not be able to boot.
236 --lz4 Compress the generated initramfs using lz4.
237 Make sure that your kernel has lz4 support compiled
238 in, otherwise you will not be able to boot.
239 --zstd Compress the generated initramfs using Zstandard.
240 Make sure that your kernel has zstd support compiled
241 in, otherwise you will not be able to boot.
242 --compress [COMPRESSION]
243 Compress the generated initramfs with the
244 passed compression program. Make sure your kernel
245 knows how to decompress the generated initramfs,
246 otherwise you will not be able to boot.
247 --no-compress Do not compress the generated initramfs. This will
248 override any other compression options.
249 --squash-compressor [COMPRESSION]
250 Specify the compressor and compressor specific options
251 used by mksquashfs if squash module is called when
252 building the initramfs.
253 --enhanced-cpio Attempt to reflink cpio file data using dracut-cpio.
254 --list-modules List all available dracut modules.
255 -M, --show-modules Print included module's name to standard output during
257 --keep Keep the temporary initramfs for debugging purposes.
258 --printsize Print out the module install size.
259 --sshkey [SSHKEY] Add SSH key to initramfs (use with ssh-client module).
260 --logfile [FILE] Logfile to use (overrides configuration setting).
261 --reproducible Create reproducible images.
262 --no-reproducible Do not create reproducible images.
263 --loginstall [DIR] Log all files installed from the host to [DIR].
264 --uefi Create an UEFI executable with the kernel cmdline and
266 --no-uefi Disables UEFI mode.
267 --no-machineid Affects the default output filename of the UEFI
268 executable, discarding the <MACHINE_ID> part.
269 --uefi-stub [FILE] Use the UEFI stub [FILE] to create an UEFI executable.
270 --uefi-splash-image [FILE]
271 Use [FILE] as a splash image when creating an UEFI
272 executable. Requires bitmap (.bmp) image format.
273 --kernel-image [FILE] Location of the kernel image.
274 --regenerate-all Regenerate all initramfs images at the default location
275 for the kernel versions found on the system.
276 -p, --parallel Use parallel processing if possible (currently only
277 supported --regenerate-all)
278 images simultaneously.
279 --version Display version.
281 If [LIST] has multiple arguments, then you have to put these in quotes.
285 # dracut --add-drivers "module1 module2" ...
291 [[ $dracutbasedir ]] || dracutbasedir
="$dracutsysrootdir"/usr
/lib
/dracut
292 if [[ -f $dracutbasedir/dracut-version.sh
]]; then
293 # shellcheck source=./dracut-version.sh
294 .
"$dracutbasedir"/dracut-version.sh
296 echo "dracut $DRACUT_VERSION"
299 # Fills up host_devs stack variable and makes sure there are no duplicates
303 [[ " ${host_devs[*]} " == *" $_dev "* ]] && return
308 # Little helper function for reading args from the commandline.
309 # it automatically handles -a b and -a=b variants, and returns 1 if
310 # we need to shift $3.
315 local rematch
='^[^=]*=(.*)$'
316 if [[ $2 =~
$rematch ]]; then
317 read -r "$1" <<< "${BASH_REMATCH[1]}"
319 read -r "$1" <<< "$3"
320 # There is no way to shift our callers args, so
321 # return 1 to indicate they should do it instead.
327 if grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' "$@"; then
328 printf '\ndracut: WARNING: <key>+=" <values> ": <values> should have surrounding white spaces!\n' >&2
329 printf 'dracut: WARNING: This will lead to unwanted side effects! Please fix the configuration file.\n\n' >&2
340 for i
in "$d/"*"$suffix"; do
342 printf "%s\n" "${i##*/}"
348 for f
in "${files[@]}"; do
350 if [[ -e "$d/$f" ]]; then
351 printf "%s\n" "$d/$f"
360 # Workaround -i, --include taking 2 arguments
363 if [[ $i == "-i" ]] ||
[[ $i == "--include" ]]; then
364 newat
+=("++include") # Replace --include by ++include
369 set -- "${newat[@]}" # Set new $@
372 unset POSIXLY_CORRECT
374 -o "a:m:o:d:I:k:c:r:L:fvqlHhMNp" \
378 --long add-drivers
: \
379 --long force-drivers
: \
380 --long omit-drivers
: \
384 --long filesystems
: \
386 --long install-optional
: \
403 --long squash-compressor
: \
409 --long print-cmdline \
410 --long kernel-cmdline
: \
412 --long aggressive-strip \
431 --long no-host-only \
432 --long hostonly-mode
: \
433 --long hostonly-cmdline \
434 --long no-hostonly-cmdline \
435 --long no-hostonly-default-device \
436 --long persistent-policy
: \
447 --long enhanced-cpio \
448 --long list-modules \
449 --long show-modules \
452 --long regenerate-all \
454 --long noimageifnotneeded \
455 --long early-microcode \
456 --long no-early-microcode \
457 --long reproducible \
458 --long no-reproducible \
463 --long uefi-splash-image
: \
464 --long kernel-image
: \
465 --long no-hostonly-i18n \
466 --long hostonly-i18n \
467 --long hostonly-nics
: \
468 --long no-machineid \
473 # shellcheck disable=SC2181
484 rearrange_params
"$@"
487 # parse command line args to check if '--rebuild' option is present
491 if [ "$1" == "--" ]; then
495 if [ "$1" == "--rebuild" ]; then
498 if [ ! -e "$rebuild_file" ]; then
499 echo "Image file '$rebuild_file', for rebuild, does not exist!"
502 abs_rebuild_file
=$
(readlink
-f "$rebuild_file") && rebuild_file
="$abs_rebuild_file"
509 # get output file name and kernel version from command line arguments
516 if ! [[ ${outfile+x} ]]; then
518 elif ! [[ ${kernel+x} ]]; then
521 printf "\nUnknown arguments: %s\n\n" "$*" >&2
530 # extract input image file provided with rebuild option to get previous parameters, if any
531 if [[ $append_args_l == "yes" ]]; then
534 # determine resultant file
535 if ! [[ $outfile ]]; then
536 outfile
=$rebuild_file
539 if ! rebuild_param
=$
(lsinitrd
"$rebuild_file" '*lib/dracut/build-parameter.txt'); then
540 echo "Image '$rebuild_file' has no rebuild information stored"
544 # prepend previous parameters to current command line args
545 if [[ $rebuild_param ]]; then
546 TEMP
="$rebuild_param $TEMP"
548 rearrange_params
"$@"
558 if [[ $1 != "--" ]] && [[ $1 != "--rebuild" ]]; then
559 PARMS_TO_STORE
+=" $1"
564 PARMS_TO_STORE
+=" '$2'"
568 add_dracutmodules_l
+=("$2")
569 PARMS_TO_STORE
+=" '$2'"
573 force_add_dracutmodules_l
+=("$2")
574 PARMS_TO_STORE
+=" '$2'"
578 add_drivers_l
+=("$2")
579 PARMS_TO_STORE
+=" '$2'"
583 force_drivers_l
+=("$2")
584 PARMS_TO_STORE
+=" '$2'"
588 omit_drivers_l
+=("$2")
589 PARMS_TO_STORE
+=" '$2'"
593 dracutmodules_l
+=("$2")
594 PARMS_TO_STORE
+=" '$2'"
598 omit_dracutmodules_l
+=("$2")
599 PARMS_TO_STORE
+=" '$2'"
604 PARMS_TO_STORE
+=" '$2'"
608 filesystems_l
+=("$2")
609 PARMS_TO_STORE
+=" '$2'"
613 install_items_l
+=("$2")
614 PARMS_TO_STORE
+=" '$2'"
618 install_optional_items_l
+=("$2")
619 PARMS_TO_STORE
+=" '$2'"
624 PARMS_TO_STORE
+=" '$2'"
629 PARMS_TO_STORE
+=" '$2'"
634 PARMS_TO_STORE
+=" '$2'"
639 PARMS_TO_STORE
+=" '$2'"
644 PARMS_TO_STORE
+=" '$2'"
647 --add-device |
--device)
649 PARMS_TO_STORE
+=" '$2'"
653 kernel_cmdline_l
+=("$2")
654 PARMS_TO_STORE
+=" '$2'"
657 --nofscks) nofscks_l
="yes" ;;
658 --ro-mnt) ro_mnt_l
="yes" ;;
661 PARMS_TO_STORE
+=" '$2'"
666 PARMS_TO_STORE
+=" '$2'"
671 PARMS_TO_STORE
+=" '$2'"
676 PARMS_TO_STORE
+=" '$2'"
681 PARMS_TO_STORE
+=" '$2'"
686 PARMS_TO_STORE
+=" '$2'"
691 PARMS_TO_STORE
+=" '$2'"
695 squash_compress_l
="$2"
696 PARMS_TO_STORE
+=" '$2'"
701 PARMS_TO_STORE
+=" '$2'"
706 PARMS_TO_STORE
+=" '$2'"
710 if [[ $rebuild_file == "$outfile" ]]; then
715 -f |
--force) force
=yes ;;
731 early_microcode_l
="yes"
733 --no-early-microcode)
734 early_microcode_l
="no"
736 --strip) do_strip_l
="yes" ;;
737 --aggressive-strip) aggressive_strip_l
="yes" ;;
738 --nostrip) do_strip_l
="no" ;;
739 --hardlink) do_hardlink_l
="yes" ;;
740 --nohardlink) do_hardlink_l
="no" ;;
741 --noprefix) prefix_l
="/" ;;
742 --mdadmconf) mdadmconf_l
="yes" ;;
743 --nomdadmconf) mdadmconf_l
="no" ;;
744 --lvmconf) lvmconf_l
="yes" ;;
745 --nolvmconf) lvmconf_l
="no" ;;
746 --debug) debug
="yes" ;;
747 --profile) profile
="yes" ;;
750 PARMS_TO_STORE
+=" '$2'"
757 -v |
--verbose) ((verbosity_mod_l
++)) ;;
758 -q |
--quiet) ((verbosity_mod_l--
)) ;;
761 [[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \
762 && dracutbasedir
="$(readlink -f "${0%/*}")"
764 -H |
--hostonly |
--host-only)
767 -N |
--no-hostonly |
--no-host-only)
772 PARMS_TO_STORE
+=" '$2'"
776 hostonly_cmdline_l
="yes"
779 i18n_install_all_l
="no"
782 hostonly_nics_l
+=("$2")
783 PARMS_TO_STORE
+=" '$2'"
787 i18n_install_all_l
="yes"
789 --no-hostonly-cmdline)
790 hostonly_cmdline_l
="no"
792 --no-hostonly-default-device)
793 hostonly_default_device
="no"
796 persistent_policy_l
="$2"
797 PARMS_TO_STORE
+=" '$2'"
800 --fstab) use_fstab_l
="yes" ;;
805 --bzip2) compress_l
="bzip2" ;;
806 --lzma) compress_l
="lzma" ;;
807 --xz) compress_l
="xz" ;;
808 --lzo) compress_l
="lzo" ;;
809 --lz4) compress_l
="lz4" ;;
810 --zstd) compress_l
="zstd" ;;
811 --no-compress) _no_compress_l
="cat" ;;
812 --gzip) compress_l
="gzip" ;;
813 --enhanced-cpio) enhanced_cpio_l
="yes" ;;
814 --list-modules) do_list
="yes" ;;
818 --keep) keep
="yes" ;;
819 --printsize) printsize
="yes" ;;
820 --regenerate-all) regenerate_all_l
="yes" ;;
821 -p |
--parallel) parallel_l
="yes" ;;
822 --noimageifnotneeded) noimageifnotneeded
="yes" ;;
823 --reproducible) reproducible_l
="yes" ;;
824 --no-reproducible) reproducible_l
="no" ;;
825 --uefi) uefi_l
="yes" ;;
826 --no-uefi) uefi_l
="no" ;;
829 PARMS_TO_STORE
+=" '$2'"
833 uefi_splash_image_l
="$2"
834 PARMS_TO_STORE
+=" '$2'"
839 PARMS_TO_STORE
+=" '$2'"
854 *) # should not even reach this point
855 printf "\n!Unknown option: '%s'\n\n" "$1" >&2
863 # getopt cannot handle multiple arguments, so just handle "-I,--include"
864 # the old fashioned way
867 if [ "${1%%=*}" == "++include" ]; then
869 include_target
+=("$3")
870 PARMS_TO_STORE
+=" --include '$2' '$3'"
876 [[ $sysroot_l ]] && dracutsysrootdir
="$sysroot_l"
882 unset LD_LIBRARY_PATH
886 export DRACUT_LOG_LEVEL
=warning
888 export DRACUT_LOG_LEVEL
=debug
889 export PS4
='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]-}): '
894 export PS4
='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: '
899 [[ $dracutbasedir ]] || dracutbasedir
="$dracutsysrootdir"/usr
/lib
/dracut
901 # if we were not passed a config file, try the default one
902 if [[ -z $conffile ]]; then
903 if [[ $allowlocal ]]; then
904 conffile
="$dracutbasedir/dracut.conf"
906 conffile
="$dracutsysrootdir/etc/dracut.conf"
908 elif [[ ! -e $conffile ]]; then
909 printf "%s\n" "dracut: Configuration file '$conffile' not found." >&2
913 if [[ -z $confdir ]]; then
914 if [[ $allowlocal ]]; then
915 confdir
="$dracutbasedir/dracut.conf.d"
917 confdir
="$dracutsysrootdir/etc/dracut.conf.d"
919 elif [[ ! -d $confdir ]]; then
920 printf "%s\n" "dracut: Configuration directory '$confdir' not found." >&2
924 # source our config file
925 if [[ -f $conffile ]]; then
926 check_conf_file
"$conffile"
927 # shellcheck disable=SC1090
931 # source our config dir
932 for f
in $
(dropindirs_sort
".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); do
934 # shellcheck disable=SC1090
935 [[ -e $f ]] && .
"$f"
938 # regenerate_all shouldn't be set in conf files
939 regenerate_all
=$regenerate_all_l
940 if [[ $parallel_l == "yes" ]]; then
944 if [[ $regenerate_all == "yes" ]]; then
946 if [[ $kernel ]]; then
947 printf -- "--regenerate-all cannot be called with a kernel version\n" >&2
951 if [[ $outfile ]]; then
952 printf -- "--regenerate-all cannot be called with a image file\n" >&2
956 ((len
= ${#dracut_args[@]}))
957 for ((i
= 0; i
< len
; i
++)); do
958 case ${dracut_args[$i]} in
959 --regenerate-all |
--parallel)
960 unset dracut_args
["$i"]
965 cd "$dracutsysrootdir"/lib
/modules ||
exit 1
966 if [[ $parallel != "yes" ]]; then
968 [[ -f $i/modules.dep
]] ||
[[ -f $i/modules.dep.bin
]] ||
continue
969 "$dracut_cmd" --kver="$i" "${dracut_args[@]}"
974 [[ -f $i/modules.dep
]] ||
[[ -f $i/modules.dep.bin
]] ||
continue
975 "$dracut_cmd" --kver="$i" "${dracut_args[@]}" &
980 if [[ $wst == 127 ]]; then
990 if ! [[ $kernel ]]; then
994 DRACUT_PATH
=${DRACUT_PATH:-/sbin /bin /usr/sbin /usr/bin}
996 for i
in $DRACUT_PATH; do
998 if [ -L "$dracutsysrootdir$i" ]; then
999 rl
=$
(readlink
-f "$dracutsysrootdir$i")
1001 rl
="${rl#$dracutsysrootdir}"
1002 if [[ $NPATH != *:$rl* ]]; then
1006 [[ -z $dracutsysrootdir ]] && export PATH
="${NPATH#:}"
1009 export SYSTEMCTL
=${SYSTEMCTL:-systemctl}
1011 # these options add to the stuff in the config file
1012 ((${#add_dracutmodules_l[@]})) && add_dracutmodules
+=" ${add_dracutmodules_l[*]} "
1013 ((${#omit_dracutmodules_l[@]})) && omit_dracutmodules
+=" ${omit_dracutmodules_l[*]} "
1014 ((${#force_add_dracutmodules_l[@]})) && force_add_dracutmodules
+=" ${force_add_dracutmodules_l[*]} "
1015 ((${#fscks_l[@]})) && fscks
+=" ${fscks_l[*]} "
1016 ((${#add_fstab_l[@]})) && add_fstab
+=" ${add_fstab_l[*]} "
1017 ((${#install_items_l[@]})) && install_items
+=" ${install_items_l[*]} "
1018 ((${#install_optional_items_l[@]})) && install_optional_items
+=" ${install_optional_items_l[*]} "
1019 ((${#hostonly_nics_l[@]})) && hostonly_nics
+=" ${hostonly_nics_l[*]} "
1021 # these options override the stuff in the config file
1022 ((${#dracutmodules_l[@]})) && dracutmodules
="${dracutmodules_l[*]}"
1023 ((${#filesystems_l[@]})) && filesystems
="${filesystems_l[*]}"
1024 ((${#fw_dir_l[@]})) && fw_dir
="${fw_dir_l[*]}"
1025 ((${#libdirs_l[@]})) && libdirs
="${libdirs_l[*]}"
1027 [[ $stdloglvl_l ]] && stdloglvl
=$stdloglvl_l
1028 [[ ! $stdloglvl ]] && stdloglvl
=4
1029 stdloglvl
=$
((stdloglvl
+ verbosity_mod_l
))
1030 ((stdloglvl
> 6)) && stdloglvl
=6
1031 ((stdloglvl
< 0)) && stdloglvl
=0
1033 [[ $drivers_dir_l ]] && drivers_dir
=$drivers_dir_l
1034 [[ $do_strip_l ]] && do_strip
=$do_strip_l
1035 [[ $do_strip ]] || do_strip
=yes
1036 [[ $aggressive_strip_l ]] && aggressive_strip
=$aggressive_strip_l
1037 [[ $do_hardlink_l ]] && do_hardlink
=$do_hardlink_l
1038 [[ $do_hardlink ]] || do_hardlink
=yes
1039 [[ $prefix_l ]] && prefix
=$prefix_l
1040 [[ $prefix == "/" ]] && unset prefix
1041 [[ $hostonly_l ]] && hostonly
=$hostonly_l
1042 [[ $hostonly_cmdline_l ]] && hostonly_cmdline
=$hostonly_cmdline_l
1043 [[ $hostonly_mode_l ]] && hostonly_mode
=$hostonly_mode_l
1044 [[ $hostonly == "yes" ]] && ! [[ $hostonly_cmdline ]] && hostonly_cmdline
="yes"
1045 # shellcheck disable=SC2034
1046 [[ $i18n_install_all_l ]] && i18n_install_all
=$i18n_install_all_l
1047 # shellcheck disable=SC2034
1048 [[ $persistent_policy_l ]] && persistent_policy
=$persistent_policy_l
1049 [[ $use_fstab_l ]] && use_fstab
=$use_fstab_l
1050 [[ $mdadmconf_l ]] && mdadmconf
=$mdadmconf_l
1051 [[ $lvmconf_l ]] && lvmconf
=$lvmconf_l
1052 [[ $dracutbasedir ]] || dracutbasedir
="$dracutsysrootdir"/usr
/lib
/dracut
1054 fw_path_para
=$
(< /sys
/module
/firmware_class
/parameters
/path
)
1055 fw_dir
="${fw_path_para:+$dracutsysrootdir$fw_path_para:}$dracutsysrootdir/lib/firmware/updates/$kernel:$dracutsysrootdir/lib/firmware/updates:$dracutsysrootdir/lib/firmware/$kernel:$dracutsysrootdir/lib/firmware"
1057 [[ $tmpdir_l ]] && tmpdir
="$tmpdir_l"
1058 [[ $tmpdir ]] || tmpdir
="$TMPDIR"
1059 [[ $tmpdir ]] || tmpdir
="$dracutsysrootdir"/var
/tmp
1060 [[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
1061 [[ $compress_l ]] && compress=$compress_l
1062 [[ $squash_compress_l ]] && squash_compress
=$squash_compress_l
1063 [[ $enhanced_cpio_l ]] && enhanced_cpio
=$enhanced_cpio_l
1064 [[ $show_modules_l ]] && show_modules
=$show_modules_l
1065 [[ $nofscks_l ]] && nofscks
="yes"
1066 [[ $ro_mnt_l ]] && ro_mnt
="yes"
1067 [[ $early_microcode_l ]] && early_microcode
=$early_microcode_l
1068 [[ $early_microcode ]] || early_microcode
=yes
1069 [[ $early_microcode_image_dir ]] || early_microcode_image_dir
=('/boot')
1070 [[ $early_microcode_image_name ]] \
1071 || early_microcode_image_name
=('intel-uc.img' 'intel-ucode.img' 'amd-uc.img' 'amd-ucode.img' 'early_ucode.cpio' 'microcode.cpio')
1072 [[ $logfile_l ]] && logfile
="$logfile_l"
1073 [[ $reproducible_l ]] && reproducible
="$reproducible_l"
1074 [[ $loginstall_l ]] && loginstall
="$loginstall_l"
1075 [[ $uefi_l ]] && uefi
=$uefi_l
1076 [[ $uefi_stub_l ]] && uefi_stub
="$uefi_stub_l"
1077 [[ $uefi_splash_image_l ]] && uefi_splash_image
="$uefi_splash_image_l"
1078 [[ $kernel_image_l ]] && kernel_image
="$kernel_image_l"
1079 [[ $machine_id_l ]] && machine_id
="$machine_id_l"
1081 if ! [[ $outfile ]]; then
1082 if [[ $machine_id != "no" ]]; then
1083 if [[ -d "$dracutsysrootdir"/efi
/Default
]] \
1084 ||
[[ -d "$dracutsysrootdir"/boot
/Default
]] \
1085 ||
[[ -d "$dracutsysrootdir"/boot
/efi
/Default
]]; then
1086 MACHINE_ID
="Default"
1087 elif [[ -f "$dracutsysrootdir"/etc
/machine-id
]]; then
1088 read -r MACHINE_ID
< "$dracutsysrootdir"/etc
/machine-id
1090 MACHINE_ID
="Default"
1094 if [[ $uefi == "yes" ]]; then
1095 # shellcheck disable=SC2154
1096 if [[ -n $uefi_secureboot_key && -z $uefi_secureboot_cert ]] ||
[[ -z $uefi_secureboot_key && -n $uefi_secureboot_cert ]]; then
1097 printf "%s\n" "dracut: Need 'uefi_secureboot_key' and 'uefi_secureboot_cert' both to be set." >&2
1101 if [[ -n $uefi_secureboot_key && -n $uefi_secureboot_cert ]] && ! command -v sbsign
&> /dev
/null
; then
1102 printf "%s\n" "dracut: Need 'sbsign' to create a signed UEFI executable." >&2
1106 BUILD_ID
=$
(cat "$dracutsysrootdir"/etc
/os-release
"$dracutsysrootdir"/usr
/lib
/os-release \
1107 |
while read -r line ||
[[ $line ]]; do
1108 [[ $line =~ BUILD_ID\
=* ]] && eval "$line" && echo "$BUILD_ID" && break
1110 if [[ -z $dracutsysrootdir ]]; then
1111 if [[ -d /efi
]] && mountpoint
-q /efi
; then
1115 if [[ -d /boot
/efi
/EFI
]]; then
1116 efidir
=/boot
/efi
/EFI
1121 if [[ -d $dracutsysrootdir/boot
/efi
/EFI
]]; then
1122 efidir
=/boot
/efi
/EFI
1125 mkdir
-p "$dracutsysrootdir$efidir/Linux"
1126 outfile
="$dracutsysrootdir$efidir/Linux/linux-$kernel${MACHINE_ID:+-${MACHINE_ID}}${BUILD_ID:+-${BUILD_ID}}.efi"
1128 if [[ -d "$dracutsysrootdir"/efi
/loader
/entries ||
-L "$dracutsysrootdir"/efi
/loader
/entries
]] \
1129 && [[ $MACHINE_ID ]] \
1130 && [[ -d "$dracutsysrootdir"/efi
/${MACHINE_ID} ||
-L "$dracutsysrootdir"/efi
/${MACHINE_ID} ]]; then
1131 outfile
="$dracutsysrootdir/efi/${MACHINE_ID}/${kernel}/initrd"
1132 elif [[ -d "$dracutsysrootdir"/boot
/loader
/entries ||
-L "$dracutsysrootdir"/boot
/loader
/entries
]] \
1133 && [[ $MACHINE_ID ]] \
1134 && [[ -d "$dracutsysrootdir"/boot
/${MACHINE_ID} ||
-L "$dracutsysrootdir"/boot
/${MACHINE_ID} ]]; then
1135 outfile
="$dracutsysrootdir/boot/${MACHINE_ID}/${kernel}/initrd"
1136 elif [[ -d "$dracutsysrootdir"/boot
/efi
/loader
/entries ||
-L "$dracutsysrootdir"/boot
/efi
/loader
/entries
]] \
1137 && [[ $MACHINE_ID ]] \
1138 && [[ -d "$dracutsysrootdir"/boot
/efi
/${MACHINE_ID} ||
-L "$dracutsysrootdir"/boot
/efi
/${MACHINE_ID} ]]; then
1139 outfile
="$dracutsysrootdir/boot/efi/${MACHINE_ID}/${kernel}/initrd"
1140 elif [[ -f "$dracutsysrootdir"/lib
/modules
/${kernel}/initrd
]]; then
1141 outfile
="$dracutsysrootdir/lib/modules/${kernel}/initrd"
1142 elif [[ -e $dracutsysrootdir/boot
/vmlinuz-
${kernel} ]]; then
1143 outfile
="$dracutsysrootdir/boot/initramfs-${kernel}.img"
1144 elif [[ -z $dracutsysrootdir ]] \
1145 && [[ $MACHINE_ID ]] \
1146 && mountpoint
-q /efi
; then
1147 outfile
="/efi/${MACHINE_ID}/${kernel}/initrd"
1148 elif [[ -z $dracutsysrootdir ]] \
1149 && [[ $MACHINE_ID ]] \
1150 && mountpoint
-q /boot
/efi
; then
1151 outfile
="/boot/efi/${MACHINE_ID}/${kernel}/initrd"
1153 outfile
="$dracutsysrootdir/boot/initramfs-${kernel}.img"
1158 # eliminate IFS hackery when messing with fw_dir
1159 export DRACUT_FIRMWARE_PATH
=${fw_dir// /:}
1160 fw_dir
=${fw_dir//:/ }
1162 # check for logfile and try to create one if it doesn't exist
1163 if [[ -n $logfile ]]; then
1164 if [[ ! -f $logfile ]]; then
1165 if touch "$logfile"; then
1166 printf "%s\n" "dracut: touch $logfile failed." >&2
1171 # handle compression options.
1172 DRACUT_COMPRESS_BZIP2
=${DRACUT_COMPRESS_BZIP2:-bzip2}
1173 DRACUT_COMPRESS_LBZIP2
=${DRACUT_COMPRESS_LBZIP2:-lbzip2}
1174 DRACUT_COMPRESS_LZMA
=${DRACUT_COMPRESS_LZMA:-lzma}
1175 DRACUT_COMPRESS_XZ
=${DRACUT_COMPRESS_XZ:-xz}
1176 DRACUT_COMPRESS_GZIP
=${DRACUT_COMPRESS_GZIP:-gzip}
1177 DRACUT_COMPRESS_PIGZ
=${DRACUT_COMPRESS_PIGZ:-pigz}
1178 DRACUT_COMPRESS_LZOP
=${DRACUT_COMPRESS_LZOP:-lzop}
1179 DRACUT_COMPRESS_ZSTD
=${DRACUT_COMPRESS_ZSTD:-zstd}
1180 DRACUT_COMPRESS_LZ4
=${DRACUT_COMPRESS_LZ4:-lz4}
1181 DRACUT_COMPRESS_CAT
=${DRACUT_COMPRESS_CAT:-cat}
1183 if [[ $_no_compress_l == "$DRACUT_COMPRESS_CAT" ]]; then
1184 compress="$DRACUT_COMPRESS_CAT"
1187 [[ $hostonly == yes ]] && hostonly
="-h"
1188 [[ $hostonly != "-h" ]] && unset hostonly
1190 case $hostonly_mode in
1192 [[ $hostonly ]] && hostonly_mode
="sloppy"
1195 if [[ ! $hostonly ]]; then
1200 printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2
1205 [[ $reproducible == yes ]] && DRACUT_REPRODUCIBLE
=1
1207 case "${drivers_dir}" in
1208 '' |
*lib
/modules
/${kernel} |
*lib
/modules
/${kernel}/) ;;
1210 [[ "$DRACUT_KMODDIR_OVERRIDE" ]] ||
{
1211 printf "%s\n" 'dracut: -k/--kmoddir path must contain "lib/modules" as a parent of your kernel module directory,'
1212 printf "%s\n" "dracut: or modules may not be placed in the correct location inside the initramfs."
1213 printf "%s\n" "dracut: was given: ${drivers_dir}"
1214 printf "%s\n" "dracut: expected: $(dirname "${drivers_dir}")/lib/modules/${kernel}"
1215 printf "%s\n" "dracut: Please move your modules into the correct directory structure and pass the new location,"
1216 printf "%s\n" "dracut: or set DRACUT_KMODDIR_OVERRIDE=1 to ignore this check."
1222 # shellcheck disable=SC2155
1223 readonly TMPDIR
="$(realpath -e "$tmpdir")"
1224 [ -d "$TMPDIR" ] ||
{
1225 printf "%s\n" "dracut: Invalid tmpdir '$tmpdir'." >&2
1229 if findmnt
--raw -n --target "$tmpdir" --output=options |
grep -q noexec
; then
1230 [[ $debug == yes ]] && printf "%s\n" "dracut: Tmpdir '$tmpdir' is mounted with 'noexec'."
1234 # shellcheck disable=SC2155
1235 readonly DRACUT_TMPDIR
="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)"
1236 [ -d "$DRACUT_TMPDIR" ] ||
{
1237 printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2
1241 # Cache file used to optimize get_maj_min()
1242 declare -x -r get_maj_min_cache_file
="${DRACUT_TMPDIR}/majmin_cache"
1243 : > "$get_maj_min_cache_file"
1245 # clean up after ourselves no matter how we die.
1248 [[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; };
1249 if [[ ${FSFROZEN} ]]; then
1250 fsfreeze -u "${FSFROZEN}"
1255 # clean up after ourselves no matter how we die.
1256 trap 'exit 1;' SIGINT
1258 readonly initdir
="${DRACUT_TMPDIR}/initramfs"
1261 # shellcheck disable=SC2154
1262 if [[ $early_microcode == yes ]] ||
{ [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; }; then
1263 readonly early_cpio_dir
="${DRACUT_TMPDIR}/earlycpio"
1264 mkdir
"$early_cpio_dir"
1267 [[ "$dracutsysrootdir" ]] ||
[[ "$noexec" ]] ||
export DRACUT_RESOLVE_LAZY
="1"
1269 if [[ $print_cmdline ]]; then
1276 if [[ -f $dracutbasedir/dracut-version.sh
]]; then
1277 # shellcheck source=./dracut-version.sh
1278 .
"$dracutbasedir"/dracut-version.sh
1281 if systemd-detect-virt
-c &> /dev
/null
; then
1282 export DRACUT_NO_MKNOD
=1 DRACUT_NO_XATTR
=1
1283 if [[ $hostonly ]]; then
1284 printf "%s\n" "dracut: WARNING: running in hostonly mode in a container!!"
1288 if [[ -f $dracutbasedir/dracut-init.sh
]]; then
1289 # shellcheck source=./dracut-init.sh
1290 .
"$dracutbasedir"/dracut-init.sh
1292 printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2
1293 printf "%s\n" "dracut: Are you running from a git checkout?" >&2
1294 printf "%s\n" "dracut: Try passing -l as an argument to $dracut_cmd" >&2
1298 if [[ $enhanced_cpio == "yes" ]]; then
1299 enhanced_cpio
="$dracutbasedir/dracut-cpio"
1300 if [[ -x $enhanced_cpio ]]; then
1301 # align based on statfs optimal transfer size
1302 cpio_align
=$
(stat
--file-system -c "%s" -- "$initdir")
1304 dinfo
"--enhanced-cpio ignored due to lack of dracut-cpio"
1311 # shellcheck disable=SC2154
1312 if [[ $no_kernel != yes ]] && ! [[ -d $srcmods ]]; then
1313 dfatal
"Cannot find module directory $srcmods"
1314 dfatal
"and --no-kernel was not specified"
1318 if ! [[ $print_cmdline ]]; then
1319 inst
"$DRACUT_TESTBIN"
1320 if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R "$DRACUT_TESTBIN" &> /dev
/null
; then
1321 unset DRACUT_RESOLVE_LAZY
1322 export DRACUT_RESOLVE_DEPS
=1
1324 rm -fr -- "${initdir:?}"/*
1327 dracutfunctions
=$dracutbasedir/dracut-functions.sh
1328 export dracutfunctions
1330 ((${#drivers_l[@]})) && drivers
="${drivers_l[*]}"
1331 drivers
=${drivers/-/_}
1333 ((${#add_drivers_l[@]})) && add_drivers
+=" ${add_drivers_l[*]} "
1334 add_drivers
=${add_drivers/-/_}
1336 ((${#force_drivers_l[@]})) && force_drivers
+=" ${force_drivers_l[*]} "
1337 force_drivers
=${force_drivers/-/_}
1339 ((${#omit_drivers_l[@]})) && omit_drivers
+=" ${omit_drivers_l[*]} "
1340 omit_drivers
=${omit_drivers/-/_}
1342 ((${#kernel_cmdline_l[@]})) && kernel_cmdline
+=" ${kernel_cmdline_l[*]} "
1344 omit_drivers_corrected
=""
1345 for d
in $omit_drivers; do
1346 [[ " $drivers $add_drivers " == *\
$d\
* ]] && continue
1347 [[ " $drivers $force_drivers " == *\
$d\
* ]] && continue
1348 omit_drivers_corrected
+="$d|"
1350 omit_drivers
="${omit_drivers_corrected%|}"
1351 unset omit_drivers_corrected
1353 # prepare args for logging
1354 for ((i
= 0; i
< ${#dracut_args[@]}; i
++)); do
1355 [[ ${dracut_args[$i]} == *\
* ]] \
1356 && dracut_args
[$i]="\"${dracut_args[$i]}\""
1360 dinfo
"Executing: $dracut_cmd ${dracut_args[*]}"
1362 [[ $do_list == yes ]] && {
1363 for mod
in "$dracutbasedir"/modules.d
/*; do
1364 [[ -d $mod ]] ||
continue
1365 [[ -e $mod/install ||
-e $mod/installkernel ||
-e $mod/module-setup.sh
]] ||
continue
1366 printf "%s\n" "${mod##*/??}"
1371 # This is kinda legacy -- eventually it should go away.
1372 case $dracutmodules in
1373 "" | auto
) dracutmodules
="all" ;;
1376 abs_outfile
=$
(readlink
-f "$outfile") && outfile
="$abs_outfile"
1378 [[ -d $dracutsysrootdir$systemdutildir ]] \
1379 || systemdutildir
=$
(pkg-config systemd
--variable=systemdutildir
2> /dev
/null
)
1381 if ! [[ -d $dracutsysrootdir$systemdutildir ]]; then
1382 [[ -e $dracutsysrootdir/lib
/systemd
/systemd-udevd
]] && systemdutildir
=/lib
/systemd
1383 [[ -e $dracutsysrootdir/usr
/lib
/systemd
/systemd-udevd
]] && systemdutildir
=/usr
/lib
/systemd
1386 [[ -d $dracutsysrootdir$systemdutilconfdir ]] \
1387 || systemdutilconfdir
=$
(pkg-config systemd
--variable=systemdutilconfdir
2> /dev
/null
)
1389 [[ -d $dracutsysrootdir$systemdutilconfdir ]] || systemdutilconfdir
=/etc
/systemd
1391 if [[ $no_kernel != yes ]] && [[ -d $srcmods ]]; then
1392 if ! [[ -f $srcmods/modules.dep
]]; then
1393 if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then
1394 dfatal
"$srcmods/modules.dep is missing. Did you run depmod?"
1397 dwarn
"$srcmods/modules.dep is missing. Did you run depmod?"
1402 if [[ ! $print_cmdline ]]; then
1403 if [[ -f $outfile && ! $force ]]; then
1404 dfatal
"Will not override existing initramfs ($outfile) without --force"
1408 outdir
=${outfile%/*}
1409 [[ $outdir ]] || outdir
="/"
1411 if [[ ! -d $outdir ]]; then
1412 dfatal
"Can't write to $outdir: Directory $outdir does not exist or is not accessible."
1414 elif [[ ! -w $outdir ]]; then
1415 dfatal
"No permission to write to $outdir."
1417 elif [[ -f $outfile && ! -w $outfile ]]; then
1418 dfatal
"No permission to write $outfile."
1422 if [[ $loginstall ]]; then
1423 if ! mkdir
-p "$loginstall"; then
1424 dfatal
"Could not create directory to log installed files to '$loginstall'."
1427 loginstall
=$
(readlink
-f "$loginstall")
1430 if [[ $uefi == yes ]]; then
1431 if ! command -v objcopy
&> /dev
/null
; then
1432 dfatal
"Need 'objcopy' to create a UEFI executable"
1435 unset EFI_MACHINE_TYPE_NAME
1436 EFI_SECTION_VMA_INITRD
=0x3000000
1439 EFI_MACHINE_TYPE_NAME
=x64
1442 EFI_MACHINE_TYPE_NAME
=ia32
1445 EFI_MACHINE_TYPE_NAME
=aa64
1446 # aarch64 kernels are uncompressed and thus larger, so we need a bigger gap between vma sections
1447 EFI_SECTION_VMA_INITRD
=0x4000000
1450 dfatal
"Architecture '$(uname -m)' not supported to create a UEFI executable"
1455 if ! [[ -s $uefi_stub ]]; then
1456 uefi_stub
="$dracutsysrootdir${systemdutildir}/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub"
1459 if ! [[ -s $uefi_stub ]]; then
1460 dfatal
"Can't find a uefi stub '$uefi_stub' to create a UEFI executable"
1464 if ! [[ $kernel_image ]]; then
1465 for kernel_image
in "$dracutsysrootdir/lib/modules/$kernel/vmlinuz" "$dracutsysrootdir/boot/vmlinuz-$kernel"; do
1466 [[ -s $kernel_image ]] ||
continue
1470 if ! [[ -s $kernel_image ]]; then
1471 dfatal
"Can't find a kernel image '$kernel_image' to create a UEFI executable"
1477 if [[ $acpi_override == yes ]] && ! (check_kernel_config CONFIG_ACPI_TABLE_UPGRADE || check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE
); then
1478 dwarn
"Disabling ACPI override, because kernel does not support it. CONFIG_ACPI_INITRD_TABLE_OVERRIDE!=y or CONFIG_ACPI_TABLE_UPGRADE!=y"
1482 if [[ $early_microcode == yes ]]; then
1483 if [[ $hostonly ]]; then
1484 if [[ $
(get_cpu_vendor
) == "AMD" ]]; then
1485 check_kernel_config CONFIG_MICROCODE_AMD ||
unset early_microcode
1486 elif [[ $
(get_cpu_vendor
) == "Intel" ]]; then
1487 check_kernel_config CONFIG_MICROCODE_INTEL ||
unset early_microcode
1489 unset early_microcode
1492 ! check_kernel_config CONFIG_MICROCODE_AMD \
1493 && ! check_kernel_config CONFIG_MICROCODE_INTEL \
1494 && unset early_microcode
1496 # Do not complain on non-x86 architectures as it makes no sense
1499 [[ $early_microcode != yes ]] \
1500 && dwarn
"Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE_[AMD|INTEL]!=y"
1506 # Need to be able to have non-root users read stuff (rpcbind etc)
1507 chmod 755 "$initdir"
1509 if [[ $hostonly ]]; then
1510 for i
in /sys
/proc
/run
/dev
; do
1511 if ! findmnt
--target "$i" &> /dev
/null
; then
1512 dwarning
"Turning off host-only mode: '$i' is not mounted!"
1518 declare -A host_fs_types
1520 for line
in "${fstab_lines[@]}"; do
1521 # shellcheck disable=SC2086
1527 dev
=$
(blkid
-l -t "UUID=${dev#UUID=}" -o device
)
1530 dev
=$
(blkid
-l -t "LABEL=${dev#LABEL=}" -o device
)
1533 dev
=$
(blkid
-l -t "PARTUUID=${dev#PARTUUID=}" -o device
)
1536 dev
=$
(blkid
-l -t "PARTLABEL=${dev#PARTLABEL=}" -o device
)
1539 [ -z "$dev" ] && dwarn
"Bad fstab entry $*" && continue
1540 if [[ $3 == btrfs
]]; then
1541 for mp
in $
(findmnt
--source "$1" -o TARGET
-n); do
1542 for i
in $
(btrfs_devs
"$mp"); do
1546 elif [[ $3 == zfs
]]; then
1547 for mp
in $
(zfs_devs
"$1"); do
1548 push_host_devs
"$mp"
1551 push_host_devs
"$dev"
1552 host_fs_types
["$dev"]="$3"
1555 for f
in $add_fstab; do
1556 [[ -e $f ]] ||
continue
1557 while read -r dev rest ||
[ -n "$dev" ]; do
1558 push_host_devs
"$dev"
1562 for dev
in $add_device; do
1563 push_host_devs
"$dev"
1566 if ((${#add_device_l[@]})); then
1567 add_device
+=" ${add_device_l[*]} "
1568 push_host_devs
"${add_device_l[@]}"
1571 if [[ $hostonly ]] && [[ $hostonly_default_device != "no" ]]; then
1572 # in hostonly mode, determine all devices, which have to be accessed
1573 # and examine them for filesystem types
1590 mp
=$
(readlink
-f "$dracutsysrootdir$mp")
1591 mountpoint
"$mp" > /dev
/null
2>&1 ||
continue
1592 _dev
=$
(find_block_device
"$mp")
1593 _bdev
=$
(readlink
-f "/dev/block/$_dev")
1594 [[ -b $_bdev ]] && _dev
=$_bdev
1595 [[ $mp == "/" ]] && root_devs
+=("$_dev")
1596 push_host_devs
"$_dev"
1597 if [[ $
(find_mp_fstype
"$mp") == btrfs
]]; then
1598 for i
in $
(btrfs_devs
"$mp"); do
1599 [[ $mp == "/" ]] && root_devs
+=("$i")
1602 elif [[ $
(find_mp_fstype
"$mp") == zfs
]]; then
1603 for i
in $
(zfs_devs
"$(findmnt -n -o SOURCE "$mp")"); do
1604 [[ $mp == "/" ]] && root_devs
+=("$i")
1611 # TODO - with sysroot, /proc/swaps is not relevant
1612 if [[ -f /proc
/swaps
]] && [[ -f $dracutsysrootdir/etc
/fstab
]]; then
1613 while read -r dev
type rest ||
[ -n "$dev" ]; do
1614 [[ -b $dev ]] ||
continue
1615 [[ $type == "partition" ]] ||
continue
1617 while read -r _d _m _t _o _ ||
[ -n "$_d" ]; do
1618 [[ $_d == \
#* ]] && continue
1619 [[ $_d ]] ||
continue
1620 [[ $_t != "swap" ]] && continue
1621 [[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue
1622 [[ $_o == *noauto
* ]] && continue
1623 _d
=$
(expand_persistent_dev
"$_d")
1624 [[ $_d -ef $dev ]] ||
continue
1626 if [[ -f $dracutsysrootdir/etc
/crypttab
]]; then
1627 while read -r _mapper _ _p _o ||
[ -n "$_mapper" ]; do
1628 [[ $_mapper == \
#* ]] && continue
1629 [[ $_d -ef /dev
/mapper
/"$_mapper" ]] ||
continue
1630 [[ "$_o" ]] || _o
="$_p"
1631 # skip entries with password files
1632 [[ $_p == /* ]] && [[ -f $_p ]] && continue 2
1634 [[ $_o == *swap
* ]] && continue 2
1635 done < "$dracutsysrootdir"/etc
/crypttab
1638 _dev
="$(readlink -f "$dev")"
1639 push_host_devs
"$_dev"
1640 swap_devs
+=("$_dev")
1642 done < "$dracutsysrootdir"/etc
/fstab
1646 # collect all "x-initrd.mount" entries from /etc/fstab
1647 if [[ -f $dracutsysrootdir/etc
/fstab
]]; then
1648 while read -r _d _m _t _o _ ||
[ -n "$_d" ]; do
1649 [[ $_d == \
#* ]] && continue
1650 [[ $_d ]] ||
continue
1651 [[ $_o != *x-initrd.mount
* ]] && continue
1652 _dev
=$
(expand_persistent_dev
"$_d")
1653 _dev
="$(readlink -f "$_dev")"
1654 [[ -b $_dev ]] ||
continue
1656 push_host_devs
"$_dev"
1657 if [[ $_t == btrfs
]]; then
1658 for i
in $
(btrfs_devs
"$_m"); do
1661 elif [[ $_t == zfs
]]; then
1662 for i
in $
(zfs_devs
"$_d"); do
1666 done < "$dracutsysrootdir"/etc
/fstab
1675 if [[ -b /dev
/block
/$1 ]]; then
1676 ID_FS_TYPE
=$
(get_fs_env
"/dev/block/$1") && host_fs_types
["$(readlink -f "/dev
/block
/$1")"]="$ID_FS_TYPE"
1679 if [[ -b $1 ]]; then
1680 ID_FS_TYPE
=$
(get_fs_env
"$1") && host_fs_types
["$(readlink -f "$1")"]="$ID_FS_TYPE"
1683 if fstype
=$
(find_dev_fstype
"$1"); then
1684 host_fs_types
["$1"]="$fstype"
1690 for dev
in "${host_devs[@]}"; do
1692 check_block_and_slaves_all _get_fs_type
"$(get_maj_min "$dev")"
1695 for dev
in "${!host_fs_types[@]}"; do
1696 [[ ${host_fs_types[$dev]} == "reiserfs" ]] ||
[[ ${host_fs_types[$dev]} == "xfs" ]] ||
continue
1697 rootopts
=$
(find_dev_fsopts
"$dev")
1698 if [[ ${host_fs_types[$dev]} == "reiserfs" ]]; then
1699 journaldev
=$
(fs_get_option
"$rootopts" "jdev")
1700 elif [[ ${host_fs_types[$dev]} == "xfs" ]]; then
1701 journaldev
=$
(fs_get_option
"$rootopts" "logdev")
1703 if [[ $journaldev ]]; then
1704 dev
="$(readlink -f "$dev")"
1705 push_host_devs
"$dev"
1707 check_block_and_slaves_all _get_fs_type
"$(get_maj_min "$dev")"
1711 [[ -d $dracutsysrootdir$dbus ]] \
1712 || dbus
=$
(pkg-config dbus
--variable=dbus
2> /dev
/null
)
1714 [[ -d $dracutsysrootdir$dbus ]] || dbus
=/usr
/share
/dbus-1
1716 [[ -d $dracutsysrootdir$dbusconfdir ]] \
1717 || dbusconfdir
=$
(pkg-config dbus
--variable=dbusconfdir
2> /dev
/null
)
1719 [[ -d $dracutsysrootdir$dbusconfdir ]] || dbusconfdir
=/etc
/dbus-1
1721 [[ -d $dracutsysrootdir$dbusinterfaces ]] \
1722 || dbusinterfaces
=$
(pkg-config dbus
--variable=dbusinterfaces
2> /dev
/null
)
1724 [[ -d $dracutsysrootdir$dbusinterfaces ]] || dbusinterfaces
=${dbus}/interfaces
1726 [[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] \
1727 || dbusinterfacesconfdir
=$
(pkg-config dbus
--variable=dbusinterfacesconfdir
2> /dev
/null
)
1729 [[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] || dbusinterfacesconfdir
=${dbusconfdir}/interfaces
1731 [[ -d $dracutsysrootdir$dbusservices ]] \
1732 || dbusservices
=$
(pkg-config dbus
--variable=dbusservices
2> /dev
/null
)
1734 [[ -d $dracutsysrootdir$dbusservices ]] || dbusservices
=${dbus}/services
1736 [[ -d $dracutsysrootdir$dbusservicesconfdir ]] \
1737 || dbusservicesconfdir
=$
(pkg-config dbus
--variable=dbusservicesconfdir
2> /dev
/null
)
1739 [[ -d $dracutsysrootdir$dbusservicesconfdir ]] || dbusservicesconfdir
=${dbusconfdir}/services
1741 [[ -d $dracutsysrootdir$dbussession ]] \
1742 || dbussession
=$
(pkg-config dbus
--variable=dbussession
2> /dev
/null
)
1744 [[ -d $dracutsysrootdir$dbussession ]] || dbussession
=${dbus}/session.d
1746 [[ -d $dracutsysrootdir$dbussessionconfdir ]] \
1747 || dbussessionconfdir
=$
(pkg-config dbus
--variable=dbussessionconfdir
2> /dev
/null
)
1749 [[ -d $dracutsysrootdir$dbussessionconfdir ]] || dbussessionconfdir
=${dbusconfdir}/session.d
1751 [[ -d $dracutsysrootdir$dbussystem ]] \
1752 || dbussystem
=$
(pkg-config dbus
--variable=dbussystem
2> /dev
/null
)
1754 [[ -d $dracutsysrootdir$dbussystem ]] || dbussystem
=${dbus}/system.d
1756 [[ -d $dracutsysrootdir$dbussystemconfdir ]] \
1757 || dbussystemconfdir
=$
(pkg-config dbus
--variable=dbussystemconfdir
2> /dev
/null
)
1759 [[ -d $dracutsysrootdir$dbussystemconfdir ]] || dbussystemconfdir
=${dbusconfdir}/system.d
1761 [[ -d $dracutsysrootdir$dbussystemservices ]] \
1762 || dbussystemservices
=$
(pkg-config dbus
--variable=dbussystemservices
2> /dev
/null
)
1764 [[ -d $dracutsysrootdir$dbussystemservices ]] || dbussystemservices
=${dbus}/system-services
1766 [[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] \
1767 || dbussystemservicesconfdir
=$
(pkg-config dbus
--variable=dbussystemservicesconfdir
2> /dev
/null
)
1769 [[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] || dbussystemservicesconfdir
=${dbusconfdir}/system-services
1771 [[ -d $dracutsysrootdir$udevdir ]] \
1772 || udevdir
="$(pkg-config udev --variable=udevdir 2> /dev/null)"
1773 if ! [[ -d $dracutsysrootdir$udevdir ]]; then
1774 [[ -e $dracutsysrootdir/lib
/udev
/ata_id
]] && udevdir
=/lib
/udev
1775 [[ -e $dracutsysrootdir/usr
/lib
/udev
/ata_id
]] && udevdir
=/usr
/lib
/udev
1778 [[ -d $dracutsysrootdir$udevconfdir ]] \
1779 || udevconfdir
=$
(pkg-config udev
--variable=udevconfdir
2> /dev
/null
)
1781 [[ -d $dracutsysrootdir$udevconfdir ]] || udevconfdir
=/etc
/udev
1783 [[ -d $dracutsysrootdir$udevrulesdir ]] \
1784 || udevrulesdir
=$
(pkg-config udev
--variable=udevrulesdir
2> /dev
/null
)
1786 [[ -d $dracutsysrootdir$udevrulesdir ]] || udevrulesdir
=${udevdir}/rules.d
1788 [[ -d $dracutsysrootdir$udevrulesconfdir ]] \
1789 || udevrulesconfdir
=$
(pkg-config udev
--variable=udevrulesconfdir
2> /dev
/null
)
1791 [[ -d $dracutsysrootdir$udevrulesconfdir ]] || udevrulesconfdir
=${udevconfdir}/rules.d
1793 [[ -d $dracutsysrootdir$sysctld ]] \
1794 || sysctld
=$
(pkg-config systemd
--variable=sysctld
2> /dev
/null
)
1796 [[ -d $dracutsysrootdir$sysctld ]] || sysctld
=/usr
/lib
/sysctl.d
1798 [[ -d $dracutsysrootdir$sysctlconfdir ]] \
1799 || sysctlconfdir
=$
(pkg-config systemd
--variable=sysctlconfdir
2> /dev
/null
)
1801 [[ -d $dracutsysrootdir$sysctlconfdir ]] || sysctlconfdir
=/etc
/sysctl.d
1803 [[ -d $dracutsysrootdir$environment ]] \
1804 || environment
=$
(pkg-config systemd
--variable=environment
2> /dev
/null
)
1806 [[ -d $dracutsysrootdir$environment ]] || environment
=/usr
/lib
/environment.d
1808 [[ -d $dracutsysrootdir$environmentconfdir ]] \
1809 || environmentconfdir
=$
(pkg-config systemd
--variable=environmentconfdir
2> /dev
/null
)
1811 [[ -d $dracutsysrootdir$environmentconfdir ]] || environmentconfdir
=/etc
/environment.d
1813 [[ -d $dracutsysrootdir$systemdcatalog ]] \
1814 || systemdcatalog
=$
(pkg-config systemd
--variable=systemdcatalog
2> /dev
/null
)
1816 [[ -d $dracutsysrootdir$systemdcatalog ]] || systemdcatalog
=${systemdutildir}/catalog
1818 [[ -d $dracutsysrootdir$modulesload ]] \
1819 || modulesload
=$
(pkg-config systemd
--variable=modulesload
2> /dev
/null
)
1821 [[ -d $dracutsysrootdir$modulesload ]] || modulesload
=/usr
/lib
/modules-load.d
1823 [[ -d $dracutsysrootdir$modulesloadconfdir ]] \
1824 || modulesloadconfdir
=$
(pkg-config systemd
--variable=modulesloadconfdir
2> /dev
/null
)
1826 [[ -d $dracutsysrootdir$modulesloadconfdir ]] || modulesloadconfdir
=/etc
/modules-load.d
1828 [[ -d $dracutsysrootdir$systemdnetwork ]] \
1829 || systemdnetwork
=$
(pkg-config systemd
--variable=systemdnetwork
2> /dev
/null
)
1831 [[ -d $dracutsysrootdir$systemdnetwork ]] || systemdnetwork
=${systemdutildir}/network
1833 [[ -d $dracutsysrootdir$systemdnetworkconfdir ]] \
1834 || systemdnetworkconfdir
=$
(pkg-config systemd
--variable=systemdnetworkconfdir
2> /dev
/null
)
1836 [[ -d $dracutsysrootdir$systemdnetworkconfdir ]] || systemdnetworkconfdir
=${systemdsystemconfdir}/network
1838 [[ -d $dracutsysrootdir$systemdntpunits ]] \
1839 || systemdntpunits
=$
(pkg-config systemd
--variable=systemdntpunits
2> /dev
/null
)
1841 [[ -d $dracutsysrootdir$systemdntpunits ]] || systemdntpunits
=${systemdutildir}/ntp-units.d
1843 [[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] \
1844 || systemdntpunitsconfdir
=$
(pkg-config systemd
--variable=systemdntpunitsconfdir
2> /dev
/null
)
1846 [[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] || systemdntpunitsconfdir
=${systemdsystemconfdir}/ntp-units.d
1848 [[ -d $dracutsysrootdir$systemdportable ]] \
1849 || systemdportable
=$
(pkg-config systemd
--variable=systemdportable
2> /dev
/null
)
1851 [[ -d $dracutsysrootdir$systemdportable ]] || systemdportable
=${systemdutildir}/portable
1853 [[ -d $dracutsysrootdir$systemdportableconfdir ]] \
1854 || systemdportableconfdir
=$
(pkg-config systemd
--variable=systemdportableconfdir
2> /dev
/null
)
1856 [[ -d "$dracutsysrootdir$systemdportableconfdir" ]] || systemdportableconfdir
=${systemdsystemconfdir}/portable
1858 [[ -d $dracutsysrootdir$systemdsystemunitdir ]] \
1859 || systemdsystemunitdir
=$
(pkg-config systemd
--variable=systemdsystemunitdir
2> /dev
/null
)
1861 [[ -d "$dracutsysrootdir$systemdsystemunitdir" ]] || systemdsystemunitdir
=${systemdutildir}/system
1863 [[ -d $dracutsysrootdir$systemduser ]] \
1864 || systemduser
=$
(pkg-config systemd
--variable=systemduser
2> /dev
/null
)
1866 [[ -d $dracutsysrootdir$systemduser ]] || systemduser
=${systemdutildir}/user
1868 [[ -d $dracutsysrootdir$systemduserconfdir ]] \
1869 || systemduserconfdir
=$
(pkg-config systemd
--variable=systemduserconfdir
2> /dev
/null
)
1871 [[ -d $dracutsysrootdir$systemduserconfdir ]] || systemduserconfdir
=${systemdsystemconfdir}/user
1873 [[ -d $dracutsysrootdir$systemdsystemconfdir ]] \
1874 || systemdsystemconfdir
=$
(pkg-config systemd
--variable=systemdsystemconfdir
2> /dev
/null
)
1876 [[ -d $dracutsysrootdir$systemdsystemconfdir ]] || systemdsystemconfdir
=/etc
/systemd
/system
1878 [[ -d $dracutsysrootdir$sysusers ]] \
1879 || sysusers
=$
(pkg-config systemd
--variable=sysusers
2> /dev
/null
)
1881 [[ -d $dracutsysrootdir$sysusers ]] || sysusers
=/usr
/lib
/sysusers.d
1883 [[ -d $dracutsysrootdir$sysusersconfdir ]] \
1884 || sysusersconfdir
=$
(pkg-config systemd
--variable=sysusersconfdir
2> /dev
/null
)
1886 [[ -d $dracutsysrootdir$sysusersconfdir ]] || sysusersconfdir
=/etc
/sysusers.d
1888 [[ -d $dracutsysrootdir$tmpfilesdir ]] \
1889 || tmpfilesdir
=$
(pkg-config systemd
--variable=tmpfilesdir
2> /dev
/null
)
1891 if ! [[ -d $dracutsysrootdir$tmpfilesdir ]]; then
1892 [[ -d $dracutsysrootdir/lib
/tmpfiles.d
]] && tmpfilesdir
=/lib
/tmpfiles.d
1893 [[ -d $dracutsysrootdir/usr
/lib
/tmpfiles.d
]] && tmpfilesdir
=/usr
/lib
/tmpfiles.d
1896 [[ -d $dracutsysrootdir$tmpfilesconfdir ]] \
1897 || tmpfilesconfdir
=$
(pkg-config systemd
--variable=tmpfilesconfdir
2> /dev
/null
)
1899 [[ -d $dracutsysrootdir$tmpfilesconfdir ]] || tmpfilesconfdir
=/etc
/tmpfiles.d
1901 [[ -d $dracutsysrootdir$depmodd ]] \
1902 || depmodd
=$
(pkg-config libkmod
--variable=depmodd
2> /dev
/null
)
1904 [[ -d $dracutsysrootdir$depmodd ]] || depmodd
=/usr
/lib
/depmod.d
1906 [[ -d $dracutsysrootdir$depmodconfdir ]] \
1907 || depmodconfdir
=$
(pkg-config libkmod
--variable=depmodconfdir
2> /dev
/null
)
1909 [[ -d $dracutsysrootdir$depmodconfdir ]] || depmodconfdir
=/etc
/depmod.d
1911 export initdir dracutbasedir \
1912 dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
1914 fw_dir drivers_dir debug no_kernel kernel_only \
1915 omit_drivers mdadmconf lvmconf root_devs \
1916 use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
1917 stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
1918 debug host_fs_types host_devs swap_devs sshkey add_fstab \
1919 DRACUT_VERSION udevdir udevconfdir udevrulesdir udevrulesconfdir \
1920 prefix filesystems drivers dbus dbusconfdir dbusinterfaces \
1921 dbusinterfacesconfdir dbusservices dbusservicesconfdir dbussession \
1922 dbussessionconfdir dbussystem dbussystemconfdir dbussystemservices \
1923 dbussystemservicesconfdir environment environmentconfdir modulesload \
1924 modulesloadconfdir sysctld sysctlconfdir sysusers sysusersconfdir \
1925 systemdutildir systemdutilconfdir systemdcatalog systemdntpunits \
1926 systemdntpunitsconfdir systemdsystemunitdir systemdsystemconfdir \
1927 hostonly_cmdline loginstall tmpfilesdir tmpfilesconfdir depmodd \
1931 # check all our modules to see if they should be sourced.
1932 # This builds a list of modules that we will install next.
1933 for_each_module_dir check_module
1934 for_each_module_dir check_mount
1936 dracut_module_included
"fips" && export DRACUT_FIPS_MODE
=1
1938 do_print_cmdline
() {
1939 local -A _mods_to_print
1940 for i
in $modules_loaded $mods_to_load; do
1941 _mods_to_print
[$i]=1
1944 # source our modules.
1945 for moddir
in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
1946 _d_mod
=${moddir##*/}
1947 _d_mod
=${_d_mod#[0-9][0-9]}
1948 [[ ${_mods_to_print[$_d_mod]} ]] ||
continue
1949 module_cmdline
"$_d_mod" "$moddir"
1954 if [[ $print_cmdline ]]; then
1960 # Create some directory structure first
1961 # shellcheck disable=SC2174
1962 [[ $prefix ]] && mkdir
-m 0755 -p "${initdir}${prefix}"
1964 # shellcheck disable=SC2174
1965 [[ -L $dracutsysrootdir/lib
]] || mkdir
-m 0755 -p "${initdir}${prefix}/lib"
1966 [[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib"
1968 if [[ $prefix ]]; then
1969 for d
in bin etc lib sbin tmp usr var
$libdirs; do
1971 [[ $d == */* ]] && continue
1972 ln -sfn "${prefix#/}/${d#/}" "$initdir/$d"
1976 if [[ $kernel_only != yes ]]; then
1977 for d
in usr usr
/bin usr
/sbin bin etc lib sbin tmp var var
/tmp
$libdirs; do
1979 [[ -e "${initdir}${prefix}/$d" ]] && continue
1980 if [ -L "/$d" ]; then
1981 inst_symlink
"/$d" "${prefix}/$d"
1983 # shellcheck disable=SC2174
1984 mkdir
-m 0755 -p "${initdir}${prefix}/$d"
1988 for d
in dev proc sys sysroot root run
; do
1989 if [ -L "/$d" ]; then
1992 # shellcheck disable=SC2174
1993 mkdir
-m 0755 -p "$initdir/$d"
1997 ln -sfn ..
/run
"$initdir/var/run"
1998 ln -sfn ..
/run
/lock
"$initdir/var/lock"
2000 for d
in lib
"$libdirs"; do
2001 [[ -e "${initdir}${prefix}/$d" ]] && continue
2002 if [ -h "/$d" ]; then
2003 inst
"/$d" "${prefix}/$d"
2005 # shellcheck disable=SC2174
2006 mkdir
-m 0755 -p "${initdir}${prefix}/$d"
2011 if [[ $kernel_only != yes ]]; then
2012 mkdir
-p "${initdir}/etc/cmdline.d"
2013 # shellcheck disable=SC2174
2014 mkdir
-m 0755 -p "${initdir}"/lib "${initdir}"/lib/dracut "${initdir}"/lib
/dracut
/hooks
2015 # shellcheck disable=SC2154
2016 for _d
in $hookdirs; do
2017 # shellcheck disable=SC2174
2018 mkdir
-m 0755 -p "${initdir}/lib/dracut/hooks/$_d"
2020 if [[ $EUID == "0" ]] && ! [[ $DRACUT_NO_MKNOD ]]; then
2021 [[ -c ${initdir}/dev
/null
]] || mknod
"${initdir}"/dev
/null c
1 3
2022 [[ -c ${initdir}/dev
/kmsg
]] || mknod
"${initdir}"/dev
/kmsg c
1 11
2023 [[ -c ${initdir}/dev
/console
]] || mknod
"${initdir}"/dev
/console c
5 1
2024 [[ -c ${initdir}/dev
/random
]] || mknod
"${initdir}"/dev
/random c
1 8
2025 [[ -c ${initdir}/dev
/urandom
]] || mknod
"${initdir}"/dev
/urandom c
1 9
2029 _isize
=0 #initramfs size
2031 # source our modules.
2032 for moddir
in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
2033 _d_mod
=${moddir##*/}
2034 _d_mod
=${_d_mod#[0-9][0-9]}
2035 [[ $mods_to_load == *\
$_d_mod\
* ]] ||
continue
2036 if [[ $show_modules == yes ]]; then
2037 printf "%s\n" "$_d_mod"
2039 dinfo
"*** Including module: $_d_mod ***"
2041 if [[ $kernel_only == yes ]]; then
2042 module_installkernel
"$_d_mod" "$moddir" ||
{
2043 dfatal
"installkernel failed in module $_d_mod"
2047 module_install
"$_d_mod" "$moddir"
2048 if [[ $no_kernel != yes ]]; then
2049 module_installkernel
"$_d_mod" "$moddir" ||
{
2050 dfatal
"installkernel failed in module $_d_mod"
2055 mods_to_load
=${mods_to_load// $_d_mod /}
2056 modules_loaded
+="$_d_mod "
2058 #print the module install size
2059 if [ -n "$printsize" ]; then
2060 _isize_new
=$
(du
-sk "${initdir}" |
{
2064 _isize_delta
=$
((_isize_new
- _isize
))
2065 printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
2071 for i
in $modules_loaded; do
2072 mkdir
-p "$initdir"/lib
/dracut
2073 printf "%s\n" "$i" >> "$initdir"/lib
/dracut
/modules.txt
2076 dinfo
"*** Including modules done ***"
2078 ## final stuff that has to happen
2079 if [[ $no_kernel != yes ]]; then
2080 if [[ $hostonly_mode == "strict" ]]; then
2081 cp "$DRACUT_KERNEL_MODALIASES" "$initdir"/lib
/dracut
/hostonly-kernel-modules.txt
2084 if [[ $drivers ]]; then
2085 # shellcheck disable=SC2086
2086 hostonly
='' instmods
$drivers
2089 if [[ -n ${add_drivers// /} ]]; then
2090 # shellcheck disable=SC2086
2091 hostonly
='' instmods
-c $add_drivers
2093 if [[ $force_drivers ]]; then
2094 # shellcheck disable=SC2086
2095 hostonly
='' instmods
-c $force_drivers
2096 rm -f "$initdir"/etc
/cmdline.d
/20-force_driver.conf
2097 for mod
in $force_drivers; do
2098 echo "rd.driver.pre=$mod" >> "$initdir"/etc
/cmdline.d
/20-force_drivers.conf
2101 if [[ $filesystems ]]; then
2102 # shellcheck disable=SC2086
2103 hostonly
='' instmods
-c $filesystems
2106 dinfo
"*** Installing kernel module dependencies ***"
2108 dinfo
"*** Installing kernel module dependencies done ***"
2110 if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then
2111 if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] \
2112 && [[ -f ${initdir}/lib
/modules
/$kernel/modules.dep
&& ! -s ${initdir}/lib
/modules
/$kernel/modules.dep
]]; then
2113 for i
in "${initdir}"/etc
/cmdline.d
/*.conf
; do
2114 # We need no initramfs image and do not generate one.
2115 [[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0
2121 if [[ $kernel_only != yes ]]; then
2122 # FIXME: handle legacy item split
2123 # shellcheck disable=SC2068
2124 ((${#install_items[@]} > 0)) && inst_multiple
${install_items[@]}
2125 # shellcheck disable=SC2068
2126 ((${#install_optional_items[@]} > 0)) && inst_multiple
-o ${install_optional_items[@]}
2128 if [[ $kernel_cmdline ]] && [[ $uefi != yes ]]; then
2129 printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"
2132 for line
in "${fstab_lines[@]}"; do
2133 read -r -a fstab_field
<<< "$line"
2134 if [ -z "${fstab_field[1]}" ]; then
2135 # Determine device and mount options from current system
2136 mountpoint
-q "${fstab_field[0]}" || derror
"${fstab_field[0]} is not a mount point!"
2137 read -r -a fstab_field
< <(findmnt
--raw -n --target "${fstab_field[0]}" --output=source,target
,fstype
,options
)
2138 dinfo
"Line for ${fstab_field[1]}: ${fstab_field[*]}"
2140 # Use default options
2141 [ -z "${fstab_field[3]}" ] && fstab_field
[3]="defaults"
2144 # Default options for freq and passno
2145 [ -z "${fstab_field[4]}" ] && fstab_field
[4]="0"
2146 [ -z "${fstab_field[5]}" ] && fstab_field
[5]="2"
2148 strstr
"${fstab_field[2]}" "nfs" && fstab_field
[5]="0"
2149 echo "${fstab_field[@]}" >> "${initdir}/etc/fstab"
2152 for f
in $add_fstab; do
2153 cat "$f" >> "${initdir}/etc/fstab"
2156 if [[ $dracutsysrootdir$systemdutildir ]]; then
2157 if [[ -d ${initdir}/$systemdutildir ]]; then
2158 mkdir
-p "${initdir}"/etc
/conf.d
2160 printf "%s\n" "systemdutildir=\"$systemdutildir\""
2161 printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\""
2162 printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\""
2163 } > "${initdir}"/etc
/conf.d
/systemd.conf
2167 if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then
2168 dinfo
"*** Resolving executable dependencies ***"
2169 find "$initdir" -type f
-perm /0111 -not -path '*.ko' -print0 \
2170 |
xargs -r -0 "$DRACUT_INSTALL" ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R ${DRACUT_FIPS_MODE:+-f} --
2171 dinfo
"*** Resolving executable dependencies done ***"
2174 # Now we are done with lazy resolving, always install dependencies
2175 unset DRACUT_RESOLVE_LAZY
2176 export DRACUT_RESOLVE_DEPS
=1
2179 for ((i
= 0; i
< ${#include_src[@]}; i
++)); do
2180 src
="${include_src[$i]}"
2181 target
="${include_target[$i]}"
2182 if [[ $src && $target ]]; then
2183 if [[ -f $src ]]; then
2184 inst
"$src" "$target"
2185 elif [[ -d $src ]]; then
2186 ddebug
"Including directory: $src"
2187 destdir
="${initdir}/${target}"
2189 # check for preexisting symlinks, so we can cope with the
2190 # symlinks to $prefix
2191 # Objectname is a file or a directory
2192 reset_dotglob
="$(shopt -p dotglob)"
2194 for objectname
in "$src"/*; do
2195 [[ -e $objectname ||
-L $objectname ]] ||
continue
2196 if [[ -d $objectname ]] && [[ ! -L $objectname ]]; then
2197 # objectname is a directory, let's compute the final directory name
2198 object_destdir
=${destdir}/${objectname#$src/}
2199 if ! [[ -e $object_destdir ]]; then
2200 # shellcheck disable=SC2174
2201 mkdir
-m 0755 -p "$object_destdir"
2202 chmod --reference="$objectname" "$object_destdir"
2204 $DRACUT_CP -t "$object_destdir" "$dracutsysrootdir$objectname"/.
2206 $DRACUT_CP -t "$destdir" "$dracutsysrootdir$objectname"
2209 eval "$reset_dotglob"
2210 elif [[ -e $src ]]; then
2211 derror
"$src is neither a directory nor a regular file"
2213 derror
"$src doesn't exist"
2218 if [[ $do_hardlink == yes ]] && command -v hardlink
> /dev
/null
; then
2219 dinfo
"*** Hardlinking files ***"
2220 hardlink
"$initdir" 2>&1 | dinfo
2221 dinfo
"*** Hardlinking files done ***"
2225 if [[ $do_strip == yes ]]; then
2226 # Prefer strip from elfutils for package size
2228 strip_cmd
=$
(command -v eu-strip
)
2229 [ -z "$strip_cmd" ] && strip_cmd
="strip"
2231 for p
in $strip_cmd xargs find; do
2232 if ! type -P $p > /dev
/null
; then
2233 dinfo
"Could not find '$p'. Not stripping the initramfs."
2238 if [[ $aggressive_strip == yes ]]; then
2239 # `eu-strip` and `strip` both strips all unneeded parts by default
2246 # cleanup empty ldconfig_paths directories
2247 for d
in $
(ldconfig_paths
); do
2248 rmdir -p --ignore-fail-on-non-empty "$initdir/$d" > /dev
/null
2>&1
2251 if [[ $early_microcode == yes ]]; then
2252 dinfo
"*** Generating early-microcode cpio image ***"
2253 ucode_dir
=(amd-ucode intel-ucode
)
2254 ucode_dest
=(AuthenticAMD.bin GenuineIntel.bin
)
2255 _dest_dir
="$early_cpio_dir/d/kernel/x86/microcode"
2257 mkdir
-p "$_dest_dir"
2258 if [[ $hostonly ]]; then
2259 [[ $
(get_cpu_vendor
) == "AMD" ]] && _dest_idx
="0"
2260 [[ $
(get_cpu_vendor
) == "Intel" ]] && _dest_idx
="1"
2262 for idx
in $_dest_idx; do
2263 _fw
=${ucode_dir[$idx]}
2264 for _fwdir
in $fw_dir; do
2265 if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then
2267 dinfo
"*** Constructing ${ucode_dest[$idx]} ***"
2268 if [[ $hostonly ]]; then
2269 _src
=$
(get_ucode_file
)
2270 [[ $_src ]] ||
break
2271 [[ -r $_fwdir/$_fw/$_src ]] || _src
="${_src}.early"
2272 [[ -r $_fwdir/$_fw/$_src ]] ||
break
2275 for i
in $_fwdir/$_fw/$_src; do
2276 [ -e "$i" ] && break
2279 for i
in $_fwdir/$_fw/$_src; do
2280 [[ -e $i ]] ||
continue
2282 str_ends
"$i" ".asc" && continue
2283 cat "$i" >> "$_dest_dir/${ucode_dest[$idx]}"
2285 create_early_cpio
="yes"
2288 if [[ ! -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then
2289 if cd "$early_cpio_dir/d"; then
2290 for _ucodedir
in "${early_microcode_image_dir[@]}"; do
2291 for _ucodename
in "${early_microcode_image_name[@]}"; do
2292 [[ -e "$_ucodedir/$_ucodename" ]] \
2293 && cpio --extract --file "$_ucodedir/$_ucodename" --quiet \
2294 "kernel/x86/microcode/${ucode_dest[$idx]}"
2295 if [[ -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then
2296 dinfo
"*** Using microcode found in '$_ucodedir/$_ucodename' ***"
2297 create_early_cpio
="yes"
2307 if [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; then
2308 dinfo
"*** Packaging ACPI tables to override BIOS provided ones ***"
2309 _dest_dir
="$early_cpio_dir/d/kernel/firmware/acpi"
2310 mkdir
-p "$_dest_dir"
2311 for table
in "$acpi_table_dir"/*.aml
; do
2312 dinfo
" Adding ACPI table: $table"
2313 $DRACUT_CP "$table" "$_dest_dir"
2314 create_early_cpio
="yes"
2318 dinfo
"*** Store current command line parameters ***"
2319 if ! (echo "$PARMS_TO_STORE" > "$initdir"/lib
/dracut
/build-parameter.txt
); then
2320 dfatal
"Could not store the current command line parameters"
2324 if [[ $hostonly_cmdline == "yes" ]]; then
2325 unset _stored_cmdline
2326 if [[ -d $initdir/etc
/cmdline.d
]]; then
2327 dinfo
"Stored kernel commandline:"
2328 for conf
in "$initdir"/etc
/cmdline.d
/*.conf
; do
2329 [ -e "$conf" ] ||
continue
2330 dinfo
"$(< "$conf")"
2334 if ! [[ $_stored_cmdline ]]; then
2335 dinfo
"No dracut internal kernel commandline stored in the initramfs"
2339 if [[ $kernel_only != yes ]]; then
2340 # libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so
2341 for _dir
in $libdirs; do
2342 for _f
in "$dracutsysrootdir$_dir/libpthread.so"*; do
2343 [[ -e $_f ]] ||
continue
2344 inst_libdir_file
"libgcc_s.so*"
2349 # FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled
2350 if [[ $DRACUT_FIPS_MODE ]]; then
2351 for _dir
in $libdirs; do
2352 for _f
in "$dracutsysrootdir$_dir/libcrypto.so"*; do
2353 [[ -e $_f ]] ||
continue
2354 inst_libdir_file
-o "libssl.so*"
2361 if [[ $kernel_only != yes ]]; then
2362 # make sure that library links are correct and up to date
2363 for f
in "$dracutsysrootdir"/etc
/ld.so.conf
"$dracutsysrootdir"/etc
/ld.so.conf.d
/*; do
2364 [[ -f $f ]] && inst_simple
"${f#$dracutsysrootdir}"
2366 if ! $DRACUT_LDCONFIG -r "$initdir" -f /etc
/ld.so.conf
; then
2367 if [[ $EUID == 0 ]]; then
2368 derror
"ldconfig exited ungracefully"
2370 derror
"ldconfig might need uid=0 (root) for chroot()"
2375 if dracut_module_included
"squash"; then
2376 readonly squash_dir
="$initdir/squash/root"
2377 readonly squash_img
="$initdir/squash-root.img"
2378 mkdir
-p "$squash_dir"
2379 dinfo
"*** Install squash loader ***"
2380 DRACUT_SQUASH_POST_INST
=1 module_install
"squash"
2383 if [[ $do_strip == yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
2384 # stripping files negates (dedup) benefits of using reflink
2385 [[ -n $enhanced_cpio ]] && ddebug
"strip is enabled alongside cpio reflink"
2386 dinfo
"*** Stripping files ***"
2387 find "$initdir" -type f \
2388 -executable -not -path '*/lib/modules/*.ko' -print0 \
2389 |
xargs -r -0 $strip_cmd "${strip_args[@]}" 2> /dev
/null
2391 # strip kernel modules, but do not touch signed modules
2392 find "$initdir" -type f
-path '*/lib/modules/*.ko' -print0 \
2393 |
while read -r -d $
'\0' f ||
[ -n "$f" ]; do
2394 SIG
=$
(tail -c 28 "$f" |
tr -d '\000')
2395 [[ $SIG == '~Module signature appended~' ]] ||
{ printf "%s\000" "$f"; }
2396 done |
xargs -r -0 $strip_cmd "${strip_args[@]}"
2397 dinfo
"*** Stripping files done ***"
2400 if dracut_module_included
"squash"; then
2401 dinfo
"*** Squashing the files inside the initramfs ***"
2402 declare squash_compress_arg
2403 # shellcheck disable=SC2086
2404 if [[ $squash_compress ]]; then
2405 if ! mksquashfs
/dev
/null
"$DRACUT_TMPDIR"/.squash-test.img
-no-progress -comp $squash_compress &> /dev
/null
; then
2406 dwarn
"mksquashfs doesn't support compressor '$squash_compress', failing back to default compressor."
2408 squash_compress_arg
="$squash_compress"
2412 # shellcheck disable=SC2086
2413 if ! mksquashfs
"$squash_dir" "$squash_img" \
2414 -no-xattrs -no-exports -noappend -no-recovery -always-use-fragments \
2415 -no-progress ${squash_compress_arg:+-comp $squash_compress_arg} 1> /dev
/null
; then
2416 dfatal
"Failed making squash image"
2420 rm -rf "$squash_dir"
2421 dinfo
"*** Squashing the files inside the initramfs done ***"
2423 # Skip initramfs compress
2427 dinfo
"*** Creating image file '$outfile' ***"
2429 if [[ $uefi == yes ]]; then
2430 readonly uefi_outdir
="$DRACUT_TMPDIR/uefi"
2431 mkdir
-p "$uefi_outdir"
2434 if [[ $DRACUT_REPRODUCIBLE ]]; then
2435 find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
2436 |
xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
2438 if [[ "$(cpio --help)" == *--reproducible* ]]; then
2441 dinfo
"cpio does not support '--reproducible'. Resulting image will not be reproducible."
2445 [[ $EUID != 0 ]] && cpio_owner
="0:0"
2447 if [[ $create_early_cpio == yes ]]; then
2448 echo 1 > "$early_cpio_dir/d/early_cpio"
2450 if [[ $DRACUT_REPRODUCIBLE ]]; then
2451 find "$early_cpio_dir/d" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
2452 |
xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
2455 # The microcode blob is _before_ the initramfs blob, not after
2456 if [[ -n $enhanced_cpio ]]; then
2459 cd "$early_cpio_dir/d"
2460 find .
-print0 |
sort -z \
2461 |
$enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \
2462 --mtime 0 --data-align "$cpio_align" --truncate-existing \
2463 "${DRACUT_TMPDIR}/initramfs.img"
2465 dfatal
"dracut-cpio: creation of $outfile failed"
2471 cd "$early_cpio_dir/d"
2472 find .
-print0 |
sort -z \
2473 |
cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null \
2474 ${cpio_owner:+-R "$cpio_owner"} -H newc
-o --quiet > "${DRACUT_TMPDIR}/initramfs.img"
2476 dfatal
"Creation of $outfile failed"
2482 if check_kernel_config CONFIG_RD_ZSTD
; then
2483 DRACUT_KERNEL_RD_ZSTD
=yes
2485 DRACUT_KERNEL_RD_ZSTD
=
2488 if [[ $compress == $DRACUT_COMPRESS_ZSTD* && ! $DRACUT_KERNEL_RD_ZSTD ]]; then
2489 dwarn
"Kernel has no zstd support compiled in."
2493 if [[ $compress && $compress != cat ]]; then
2494 if ! command -v "${compress%% *}" &> /dev
/null
; then
2495 derror
"Cannot execute compression command '$compress', falling back to default"
2500 if ! [[ $compress ]]; then
2501 # check all known compressors, if none specified
2502 for i
in $DRACUT_COMPRESS_PIGZ $DRACUT_COMPRESS_GZIP $DRACUT_COMPRESS_LZ4 $DRACUT_COMPRESS_LZOP $DRACUT_COMPRESS_ZSTD $DRACUT_COMPRESS_LZMA $DRACUT_COMPRESS_XZ $DRACUT_COMPRESS_LBZIP2 $DRACUT_COMPRESS_BZIP2 $DRACUT_COMPRESS_CAT; do
2503 [[ $i != "$DRACUT_COMPRESS_ZSTD" ||
$DRACUT_KERNEL_RD_ZSTD ]] ||
continue
2504 command -v "$i" &> /dev
/null ||
continue
2508 if [[ $compress == cat ]]; then
2509 dwarn
"No compression tool available. Initramfs image is going to be big."
2511 dinfo
"Using auto-determined compression method '$compress'"
2515 # choose the right arguments for the compressor
2518 if [[ $compress == lbzip2
]] ||
command -v "$DRACUT_COMPRESS_LBZIP2" &> /dev
/null
; then
2519 compress="$DRACUT_COMPRESS_LBZIP2 -9"
2521 compress="$DRACUT_COMPRESS_BZIP2 -9"
2525 compress="$DRACUT_COMPRESS_LZMA -9 -T0"
2528 compress="$DRACUT_COMPRESS_XZ --check=crc32 --lzma2=dict=1MiB -T0"
2531 if [[ $compress == pigz
]] ||
command -v "$DRACUT_COMPRESS_PIGZ" &> /dev
/null
; then
2532 compress="$DRACUT_COMPRESS_PIGZ -9 -n -T -R"
2533 elif command -v gzip &> /dev
/null
&& $DRACUT_COMPRESS_GZIP --help 2>&1 |
grep -q rsyncable
; then
2534 compress="$DRACUT_COMPRESS_GZIP -n -9 --rsyncable"
2536 compress="$DRACUT_COMPRESS_GZIP -n -9"
2540 compress="$DRACUT_COMPRESS_LZOP -9"
2543 compress="$DRACUT_COMPRESS_LZ4 -l -9"
2546 compress="$DRACUT_COMPRESS_ZSTD -15 -q -T0"
2550 if [[ -n $enhanced_cpio ]]; then
2551 if [[ $compress == "cat" ]]; then
2552 # dracut-cpio appends by default, so any ucode remains
2553 cpio_outfile
="${DRACUT_TMPDIR}/initramfs.img"
2555 ddebug
"$compress compression enabled alongside cpio reflink"
2556 # dracut-cpio doesn't output to stdout, so stage for compression
2557 cpio_outfile
="${DRACUT_TMPDIR}/initramfs.img.uncompressed"
2563 find .
-print0 |
sort -z \
2564 |
$enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \
2565 --mtime 0 --data-align "$cpio_align" "$cpio_outfile" ||
exit 1
2566 [[ $compress == "cat" ]] && exit 0
2567 $compress < "$cpio_outfile" >> "${DRACUT_TMPDIR}/initramfs.img" \
2568 && rm "$cpio_outfile"
2570 dfatal
"dracut-cpio: creation of $outfile failed"
2578 find .
-print0 |
sort -z \
2579 |
cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null ${cpio_owner:+-R "$cpio_owner"} -H newc
-o --quiet \
2580 |
$compress >> "${DRACUT_TMPDIR}/initramfs.img"
2582 dfatal
"Creation of $outfile failed"
2587 # shellcheck disable=SC2154
2588 if ((maxloglvl
>= 5)) && ((verbosity_mod_l
>= 0)); then
2589 if [[ $allowlocal ]]; then
2590 "$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img" | ddebug
2592 lsinitrd
"${DRACUT_TMPDIR}/initramfs.img" | ddebug
2598 if [[ $uefi == yes ]]; then
2599 if [[ $kernel_cmdline ]]; then
2600 echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt"
2601 elif [[ $hostonly_cmdline == yes ]] && [ -d "$initdir/etc/cmdline.d" ]; then
2602 for conf
in "$initdir"/etc
/cmdline.d
/*.conf
; do
2603 [ -e "$conf" ] ||
continue
2604 printf "%s " "$(< "$conf")" >> "$uefi_outdir/cmdline.txt"
2608 if [[ $kernel_cmdline ]] ||
[[ $hostonly_cmdline == yes && -d "$initdir/etc/cmdline.d" ]]; then
2609 echo -ne "\x00" >> "$uefi_outdir/cmdline.txt"
2610 dinfo
"Using UEFI kernel cmdline:"
2611 dinfo
"$(tr -d '\000' < "$uefi_outdir/cmdline.txt
")"
2612 uefi_cmdline
="${uefi_outdir}/cmdline.txt"
2617 [[ -s $dracutsysrootdir/usr
/lib
/os-release
]] && uefi_osrelease
="$dracutsysrootdir/usr/lib/os-release"
2618 [[ -s $dracutsysrootdir/etc
/os-release
]] && uefi_osrelease
="$dracutsysrootdir/etc/os-release"
2619 if [[ -s ${dracutsysrootdir}${uefi_splash_image} ]]; then
2620 uefi_splash_image
="${dracutsysrootdir}${uefi_splash_image}"
2622 unset uefi_splash_image
2626 ${uefi_osrelease:+--add-section .osrel="$uefi_osrelease" --change-section-vma .osrel=0x20000} \
2627 ${uefi_cmdline:+--add-section .cmdline="$uefi_cmdline" --change-section-vma .cmdline=0x30000} \
2628 ${uefi_splash_image:+--add-section .splash="$uefi_splash_image" --change-section-vma .splash=0x40000} \
2629 --add-section .linux
="$kernel_image" --change-section-vma .linux
=0x2000000 \
2630 --add-section .initrd
="${DRACUT_TMPDIR}/initramfs.img" --change-section-vma .initrd
="${EFI_SECTION_VMA_INITRD}" \
2631 "$uefi_stub" "${uefi_outdir}/linux.efi"; then
2632 if [[ -n ${uefi_secureboot_key} && -n ${uefi_secureboot_cert} ]]; then
2634 ${uefi_secureboot_engine:+--engine "$uefi_secureboot_engine"} \
2635 --key "${uefi_secureboot_key}" \
2636 --cert "${uefi_secureboot_cert}" \
2637 --output "$outfile" "${uefi_outdir}/linux.efi"; then
2638 dinfo
"*** Creating signed UEFI image file '$outfile' done ***"
2640 dfatal
"*** Creating signed UEFI image file '$outfile' failed ***"
2644 if cp --reflink=auto
"${uefi_outdir}/linux.efi" "$outfile"; then
2645 dinfo
"*** Creating UEFI image file '$outfile' done ***"
2650 dfatal
"*** Creating UEFI image file '$outfile' failed ***"
2654 if cp --reflink=auto
"${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then
2655 dinfo
"*** Creating initramfs image file '$outfile' done ***"
2658 dfatal
"Creation of $outfile failed"
2664 btrfs filesystem show
"$1" |
sed -n '1s/^.*uuid: //p'
2667 freeze_ok_for_btrfs
() {
2668 local mnt uuid1 uuid2
2669 # If the output file is on btrfs, we need to make sure that it's
2670 # not on a subvolume of the same file system as the root FS.
2671 # Otherwise, fsfreeze() might freeze the entire system.
2672 # This is most conveniently checked by comparing the FS uuid.
2674 [[ "$(stat -f -c %T -- "/")" == "btrfs" ]] ||
return 0
2675 mnt
=$
(stat
-c %m
-- "$1")
2676 uuid1
=$
(btrfs_uuid
"$mnt")
2677 uuid2
=$
(btrfs_uuid
"/")
2678 [[ $uuid1 && $uuid2 && $uuid1 != "$uuid2" ]]
2681 freeze_ok_for_fstype
() {
2685 [[ "$(stat -c %m -- "$outfile")" == "/" ]] && return 1
2686 fstype
=$
(stat
-f -c %T
-- "$outfile")
2695 freeze_ok_for_btrfs
"$outfile"
2703 # We sync/fsfreeze only if we're operating on a live booted system.
2704 # It's possible for e.g. `kernel` to be installed as an RPM BuildRequires or equivalent,
2705 # and there's no reason to sync, and *definitely* no reason to fsfreeze.
2706 # Another case where this happens is rpm-ostree, which performs its own sync/fsfreeze
2707 # globally. See e.g. https://github.com/ostreedev/ostree/commit/8642ef5ab3fec3ac8eb8f193054852f83a8bc4d0
2708 if [[ -d $dracutsysrootdir/run
/systemd
/system
]]; then
2709 if ! sync
"$outfile" 2> /dev
/null
; then
2710 dinfo
"sync operation on newly created initramfs $outfile failed"
2714 # use fsfreeze only if we're not writing to /
2715 if [[ "$(stat -c %m -- "$outfile")" != "/" ]] && freeze_ok_for_fstype
"$outfile"; then
2716 FSFROZEN
="$(dirname "$outfile")"
2717 if ! (fsfreeze
-f "${FSFROZEN}" 2> /dev
/null
&& fsfreeze
-u "${FSFROZEN}" 2> /dev
/null
); then
2718 dwarn
"Could not fsfreeze $(dirname "$outfile")"