1 # Makefile for GNU Compiler Collection
2 # Run 'configure' to generate Makefile from Makefile.in
4 # Copyright (C) 1987-2023 Free Software Foundation, Inc.
6 #This file is part of GCC.
8 #GCC is free software; you can redistribute it and/or modify
9 #it under the terms of the GNU General Public License as published by
10 #the Free Software Foundation; either version 3, or (at your option)
13 #GCC is distributed in the hope that it will be useful,
14 #but WITHOUT ANY WARRANTY; without even the implied warranty of
15 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 #GNU General Public License for more details.
18 #You should have received a copy of the GNU General Public License
19 #along with GCC; see the file COPYING3. If not see
20 #<http://www.gnu.org/licenses/>.
22 # The targets for external use include:
23 # all, doc, install, install-cross, install-cross-rest, install-strip,
24 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean.
26 # This is the default target.
27 # Set by autoconf to "all.internal" for a native build, or
28 # "all.cross" to build a cross compiler.
31 # Depend on this to specify a phony target portably.
34 # This tells GNU make version 3 not to export the variables
35 # defined in this file into the environment (and thus recursive makes).
37 # And this tells it not to automatically pass command-line variables
41 # Suppress smart makes who think they know how to automake yacc and flex file
45 # The only suffixes we want for implicit rules are .c and .o, so clear
46 # the list and add them. This speeds up GNU Make, and allows -r to work.
47 # For i18n support, we also need .gmo, .po, .pox.
48 # This must come before the language makefile fragments to allow them to
49 # add suffixes and rules of their own.
51 .SUFFIXES
: .c .
cc .o .po .pox .gmo
53 # -------------------------------
54 # Standard autoconf-set variables
55 # -------------------------------
60 host_noncanonical
=@host_noncanonical@
63 target_noncanonical
:=@target_noncanonical@
65 # Normally identical to target_noncanonical, except for compilers built
66 # as accelerator targets.
67 real_target_noncanonical
:=@real_target_noncanonical@
68 accel_dir_suffix
= @accel_dir_suffix@
70 # Sed command to transform gcc to installed name.
71 program_transform_name
:= @program_transform_name@
73 # -----------------------------
74 # Directories used during build
75 # -----------------------------
77 # Directory where sources are, from where we are.
79 gcc_docdir
= @
srcdir@
/doc
81 # Directory where sources are, absolute.
82 abs_srcdir
= @abs_srcdir@
83 abs_docdir
= @abs_srcdir@
/doc
85 # Directory where sources are, relative to here.
86 top_srcdir
= @top_srcdir@
88 # Top build directory for this package, relative to here.
91 # The absolute path to the current directory.
92 objdir
:= $(shell pwd
)
94 host_subdir
=@host_subdir@
95 build_subdir
=@build_subdir@
96 target_subdir
=@target_subdir@
97 build_libsubdir
=@build_libsubdir@
99 # Top build directory for the "Cygnus tree", relative to $(top_builddir).
100 ifeq ($(host_subdir
),.
)
101 toplevel_builddir
:= ..
103 toplevel_builddir
:= ..
/..
106 build_objdir
:= $(toplevel_builddir
)/$(build_subdir
)
107 build_libobjdir
:= $(toplevel_builddir
)/$(build_libsubdir
)
108 target_objdir
:= $(toplevel_builddir
)/$(target_subdir
)
114 # Directory where sources are, from where we are.
117 # We define a vpath for the sources of the .texi files here because they
118 # are split between multiple directories and we would rather use one implicit
119 # pattern rule for everything.
120 # This vpath could be extended within the Make-lang fragments.
122 vpath
%.texi
$(gcc_docdir
)
123 vpath
%.texi
$(gcc_docdir
)/include
129 # Extra flags to pass to indicate cross compilation, which
130 # might be used or tested by Make-lang fragments.
133 # Variables that exist for you to override.
134 # See below for how to change them for certain systems.
136 # List of language subdirectories.
137 SUBDIRS
=@subdirs@ build
139 # Selection of languages to be made.
140 CONFIG_LANGUAGES
= @all_selected_languages@
141 LANGUAGES
= c
$(CONFIG_LANGUAGES
)
142 ifeq (@enable_gcov@
,yes
)
143 LANGUAGES
+= gcov
$(exeext
) gcov-dump
$(exeext
) gcov-tool
$(exeext
)
146 # Default values for variables overridden in Makefile fragments.
147 # CFLAGS is for the user to override to, e.g., do a cross build with -O2.
148 # TCFLAGS is used for compilations with the GCC just built.
149 # T_CFLAGS is used for all compilations and is overridden by t-* files.
150 # TFLAGS is also for the user to override, passed down from the top-level
151 # Makefile. It is used for all compilations.
156 CXXFLAGS
= @CXXFLAGS@
159 # Should we build position-independent host code?
162 # The linker flag for the above.
163 LD_PICFLAG
= @LD_PICFLAG@
165 # Flags to determine code coverage. When coverage is disabled, this will
166 # contain the optimization flags, as you normally want code coverage
167 # without optimization.
168 COVERAGE_FLAGS
= @coverage_flags@
169 coverageexts
= .
{gcda
,gcno
}
171 # The warning flags are separate from CFLAGS because people tend to
172 # override optimization flags and we'd like them to still have warnings
173 # turned on. These flags are also used to pass other stage dependent
174 # flags from configure. The user is free to explicitly turn these flags
176 # LOOSE_WARN are the warning flags to use when compiling something
177 # which is only compiled with gcc, such as libgcc.
178 # C_LOOSE_WARN is similar, but with C-only warnings.
179 # STRICT_WARN are the additional warning flags to
180 # apply to the back end and some front ends, which may be compiled
181 # with other compilers.
182 # C_STRICT_WARN is similar, with C-only warnings.
183 LOOSE_WARN
= @loose_warn@
184 C_LOOSE_WARN
= @c_loose_warn@
185 STRICT_WARN
= @strict_warn@
186 C_STRICT_WARN
= @c_strict_warn@
188 # This is set by --enable-checking. The idea is to catch forgotten
189 # "extern" tags in header files.
190 NOCOMMON_FLAG
= @nocommon_flag@
192 NOEXCEPTION_FLAGS
= @noexception_flags@
194 ALIASING_FLAGS
= @aliasing_flags@
196 # This is set by --disable-maintainer-mode (default) to "#"
197 # FIXME: 'MAINT' will always be set to an empty string, no matter if
198 # --disable-maintainer-mode is used or not. This is because the
199 # following will expand to "MAINT := " in maintainer mode, and to
200 # "MAINT := #" in non-maintainer mode, but because '#' starts a comment,
201 # they mean exactly the same thing for make.
204 # The following provides the variable ENABLE_MAINTAINER_RULES that can
205 # be used in language Make-lang.in makefile fragments to enable
206 # maintainer rules. So, ENABLE_MAINTAINER_RULES is 'true' in
207 # maintainer mode, and '' otherwise.
208 @MAINT@ ENABLE_MAINTAINER_RULES
= true
210 # These are set by --enable-checking=valgrind.
211 RUN_GEN
= @valgrind_command@
212 VALGRIND_DRIVER_DEFINES
= @valgrind_path_defines@
214 # This is how we control whether or not the additional warnings are applied.
215 .
-warn
= $(STRICT_WARN
)
216 build-warn
= $(STRICT_WARN
)
217 rtl-ssa-warn
= $(STRICT_WARN
)
218 GCC_WARN_CFLAGS
= $(LOOSE_WARN
) $(C_LOOSE_WARN
) $($(@D
)-warn
) $(if
$(filter-out $(STRICT_WARN
),$($(@D
)-warn
)),,$(C_STRICT_WARN
)) $(NOCOMMON_FLAG
) $($@
-warn
)
219 GCC_WARN_CXXFLAGS
= $(LOOSE_WARN
) $($(@D
)-warn
) $(NOCOMMON_FLAG
) $($@
-warn
)
222 one_to_9999_0
:=1 2 3 4 5 6 7 8 9
223 one_to_9999_1
:=0 $(one_to_9999_0
)
224 one_to_9999_2
:=$(foreach i
,$(one_to_9999_0
),$(addprefix $(i
),$(one_to_9999_1
)))
225 one_to_9999_3
:=$(addprefix 0,$(one_to_9999_1
)) $(one_to_9999_2
)
226 one_to_9999_4
:=$(foreach i
,$(one_to_9999_0
),$(addprefix $(i
),$(one_to_9999_3
)))
227 one_to_9999_5
:=$(addprefix 0,$(one_to_9999_3
)) $(one_to_9999_4
)
228 one_to_9999_6
:=$(foreach i
,$(one_to_9999_0
),$(addprefix $(i
),$(one_to_9999_5
)))
229 one_to_9999
:=$(one_to_9999_0
) $(one_to_9999_2
) $(one_to_9999_4
) $(one_to_9999_6
)
231 # The number of splits to be made for the match.pd files.
232 NUM_MATCH_SPLITS
= @DEFAULT_MATCHPD_PARTITIONS@
233 MATCH_SPLITS_SEQ
= $(wordlist
1,$(NUM_MATCH_SPLITS
),$(one_to_9999
))
234 GIMPLE_MATCH_PD_SEQ_SRC
= $(patsubst %, gimple-match-
%.
cc, $(MATCH_SPLITS_SEQ
))
235 GIMPLE_MATCH_PD_SEQ_O
= $(patsubst %, gimple-match-
%.o
, $(MATCH_SPLITS_SEQ
))
236 GENERIC_MATCH_PD_SEQ_SRC
= $(patsubst %, generic-match-
%.
cc, $(MATCH_SPLITS_SEQ
))
237 GENERIC_MATCH_PD_SEQ_O
= $(patsubst %, generic-match-
%.o
, $(MATCH_SPLITS_SEQ
))
239 # These files are to have specific diagnostics suppressed, or are not to
240 # be subject to -Werror:
241 # flex output may yield harmless "no previous prototype" warnings
242 build
/gengtype-lex.o-warn
= -Wno-error
243 gengtype-lex.o-warn
= -Wno-error
244 libgcov-util.o-warn
= -Wno-error
245 libgcov-driver-tool.o-warn
= -Wno-error
246 libgcov-merge-tool.o-warn
= -Wno-error
247 gimple-match-exports.o-warn
= -Wno-unused
248 dfp.o-warn
= -Wno-strict-aliasing
250 # All warnings have to be shut off in stage1 if the compiler used then
251 # isn't gcc; configure determines that. WARN_CFLAGS will be either
252 # $(GCC_WARN_CFLAGS), or nothing. Similarly, WARN_CXXFLAGS will be
253 # either $(GCC_WARN_CXXFLAGS), or nothing.
254 WARN_CFLAGS
= @warn_cflags@
255 WARN_CXXFLAGS
= @warn_cxxflags@
257 CPPFLAGS
= @CPPFLAGS@
270 RANLIB_FLAGS
= @ranlib_flags@
272 # Libraries to use on the host.
273 HOST_LIBS
= @HOST_LIBS@
275 # The name of the compiler to use.
277 COMPILER_FLAGS
= $(CXXFLAGS
)
278 # If HOST_LIBS is set, then the user is controlling the libraries to
279 # link against. In that case, link with $(CC) so that the -lstdc++
280 # library is not introduced. If HOST_LIBS is not set, link with
281 # $(CXX) to pick up -lstdc++.
284 LINKER_FLAGS
= $(CXXFLAGS
)
287 LINKER_FLAGS
= $(CFLAGS
)
290 enable_host_pie
= @enable_host_pie@
292 # Enable Intel CET on Intel CET enabled host if needed.
293 CET_HOST_FLAGS
= @CET_HOST_FLAGS@
294 COMPILER
+= $(CET_HOST_FLAGS
)
296 DO_LINK_MUTEX
= @DO_LINK_MUTEX@
298 # Maybe compile the compilers with -fPIE or -fPIC.
299 COMPILER
+= $(PICFLAG
)
301 # Link with -pie, or -no-pie, depending on the above.
302 LINKER
+= $(LD_PICFLAG
)
304 # Like LINKER, but use a mutex for serializing front end links.
305 ifeq (@DO_LINK_MUTEX@
,true
)
306 LLINKER
= $(SHELL
) $(srcdir)/lock-and-run.sh linkfe.lck
$(LINKER
)
311 THIN_ARCHIVE_SUPPORT
= @thin_archive_support@
313 USE_THIN_ARCHIVES
= no
314 ifeq ($(THIN_ARCHIVE_SUPPORT
),yes
)
315 ifeq ($(AR_FLAGS
),rc
)
316 ifeq ($(RANLIB_FLAGS
),)
317 USE_THIN_ARCHIVES
= yes
322 # -------------------------------------------
323 # Programs which operate on the build machine
324 # -------------------------------------------
327 # pwd command to use. Allow user to override default by setting PWDCMD in
328 # the environment to account for automounters. The make variable must not
329 # be called PWDCMD, otherwise the value set here is passed to make
330 # subprocesses and overrides the setting from the user's environment.
331 # Don't use PWD since it is a common shell environment variable and we
332 # don't want to corrupt it.
333 PWD_COMMAND
= $${PWDCMD-pwd
}
334 # on sysV, define this as cp.
336 # Some systems may be missing symbolic links, regular links, or both.
337 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
340 # These permit overriding just for certain files.
341 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
342 INSTALL_DATA
= @INSTALL_DATA@
343 INSTALL_SCRIPT
= @INSTALL@
344 install_sh
= $(SHELL
) $(srcdir)/..
/install-sh
345 INSTALL_STRIP_PROGRAM
= $(install_sh
) -c
-s
346 MAKEINFO
= @MAKEINFO@
347 MAKEINFOFLAGS
= --no-split
350 TEXI2HTML
= $(MAKEINFO
) --html
351 TEXI2POD
= perl
$(srcdir)/..
/contrib
/texi2pod.pl
352 POD2MAN
= pod2man
--center
="GNU" --release
="gcc-$(version)" --date
=$(shell sed
's/\(....\)\(..\)\(..\)/\1-\2-\3/' <$(DATESTAMP
))
353 # Some versions of `touch' (such as the version on Solaris 2.8)
354 # do not correctly set the timestamp due to buggy versions of `utime'
355 # in the kernel. So, we use `echo' instead.
356 STAMP
= echo timestamp
>
357 # If necessary (e.g., when using the MSYS shell on Microsoft Windows)
358 # translate the shell's notion of absolute pathnames to the native
360 build_file_translate
= @build_file_translate@
362 # Make sure the $(MAKE) variable is defined.
365 # Locate mkinstalldirs.
366 mkinstalldirs
=$(SHELL
) $(srcdir)/..
/mkinstalldirs
368 # write_entries_to_file - writes each entry in a list
369 # to the specified file. Entries are written in chunks of
370 # $(write_entries_to_file_split) to accommodate systems with
371 # severe command-line-length limitations.
373 # $(1): variable containing entries to iterate over
375 write_entries_to_file_split
= 50
376 write_entries_to_file
= $(shell rm -f
$(2) ||
:) $(shell touch
$(2)) \
378 $(shell i
=1; while
test $$i -le
$(words $(1)); do \
379 echo
$$i; i
=`expr $$i + $(write_entries_to_file_split)`; done
), \
380 $(shell echo
"$(wordlist $(range), \
381 $(shell expr $(range) + $(write_entries_to_file_split) - 1), $(1))" \
382 | tr
' ' '\012' >> $(2)))
384 # The jit documentation looks better if built with sphinx, but can be
385 # built with texinfo if sphinx is not available.
386 # configure sets "doc_build_sys" to "sphinx" or "texinfo" accordingly
387 doc_build_sys
=@doc_build_sys@
393 # Dependency tracking stuff.
394 CXXDEPMODE
= @CXXDEPMODE@
396 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
398 # In the past we used AC_PROG_CC_C_O and set this properly, but
399 # it was discovered that this hadn't worked in a long time, so now
401 OUTPUT_OPTION
= -o
$@
403 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
404 # -I../zlib, unless we were configured with --with-system-zlib, in which
405 # case both are empty.
417 # Set to 'yes' if the LTO front end is enabled.
418 enable_lto
= @enable_lto@
420 # Compiler and flags needed for plugin support
422 PLUGINCFLAGS
= @CXXFLAGS@
424 # Libs and linker options needed for plugin support
425 PLUGINLIBS
= @pluginlibs@
427 enable_plugin
= @enable_plugin@
429 # On MinGW plugin installation involves installing import libraries.
430 ifeq ($(enable_plugin
),yes
)
431 plugin_implib
:= $(if
$(strip $(filter mingw
%,$(host_os
))),yes
,no
)
434 enable_host_shared
= @enable_host_shared@
436 enable_as_accelerator
= @enable_as_accelerator@
438 CPPLIB
= ..
/libcpp
/libcpp.a
439 CPPINC
= -I
$(srcdir)/..
/libcpp
/include
441 CODYLIB
= ..
/libcody
/libcody.a
442 CODYINC
= -I
$(srcdir)/..
/libcody
445 # Where to find decNumber
446 enable_decimal_float
= @enable_decimal_float@
447 DECNUM
= $(srcdir)/..
/libdecnumber
448 DECNUMFMT
= $(srcdir)/..
/libdecnumber
/$(enable_decimal_float
)
449 DECNUMINC
= -I
$(DECNUM
) -I
$(DECNUMFMT
) -I..
/libdecnumber
450 LIBDECNUMBER
= ..
/libdecnumber
/libdecnumber.a
452 # The backtrace library.
453 BACKTRACE
= $(srcdir)/..
/libbacktrace
454 BACKTRACEINC
= -I
$(BACKTRACE
)
455 LIBBACKTRACE
= ..
/libbacktrace
/.libs
/libbacktrace.a
457 # Target to use when installing include directory. Either
458 # install-headers-tar, install-headers-cpio or install-headers-cp.
459 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
461 # Header files that are made available under the same name
462 # to programs compiled with GCC.
463 USER_H
= $(srcdir)/ginclude
/float.h \
464 $(srcdir)/ginclude
/iso646.h \
465 $(srcdir)/ginclude
/stdarg.h \
466 $(srcdir)/ginclude
/stdbool.h \
467 $(srcdir)/ginclude
/stddef.h \
468 $(srcdir)/ginclude
/varargs.h \
469 $(srcdir)/ginclude
/stdfix.h \
470 $(srcdir)/ginclude
/stdnoreturn.h \
471 $(srcdir)/ginclude
/stdalign.h \
472 $(srcdir)/ginclude
/stdatomic.h \
473 $(srcdir)/ginclude
/stdckdint.h \
476 USER_H_INC_NEXT_PRE
= @user_headers_inc_next_pre@
477 USER_H_INC_NEXT_POST
= @user_headers_inc_next_post@
479 # Enable target overriding of this fragment, as in config/t-vxworks.
480 T_GLIMITS_H
= $(srcdir)/glimits.h
481 T_STDINT_GCC_H
= $(srcdir)/ginclude
/stdint-gcc.h
483 # The GCC to use for compiling crt*.o.
484 # Usually the one we just built.
485 # Don't use this as a dependency--use $(GCC_PASSES).
486 GCC_FOR_TARGET
= $(STAGE_CC_WRAPPER
) .
/xgcc
-B.
/ -B
$(build_tooldir
)/bin
/ -isystem
$(build_tooldir
)/include -isystem
$(build_tooldir
)/sys-include
-L
$(objdir
)/..
/ld $(TFLAGS
)
488 # Set if the compiler was configured with --with-build-sysroot.
489 SYSROOT_CFLAGS_FOR_TARGET
= @SYSROOT_CFLAGS_FOR_TARGET@
491 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
493 # It also specifies -isystem ./include to find, e.g., stddef.h.
494 GCC_CFLAGS
=$(CFLAGS_FOR_TARGET
) $(INTERNAL_CFLAGS
) $(T_CFLAGS
) $(LOOSE_WARN
) $(C_LOOSE_WARN
) -Wold-style-definition
$($@
-warn
) -isystem .
/include $(TCFLAGS
)
496 # ---------------------------------------------------
497 # Programs which produce files for the target machine
498 # ---------------------------------------------------
500 AR_FOR_TARGET
:= $(shell \
501 if
[ -f
$(objdir
)/..
/binutils
/ar ] ; then \
502 echo
$(objdir
)/..
/binutils
/ar ; \
504 if
[ "$(host)" = "$(target)" ] ; then \
507 t
='$(program_transform_name)'; echo
ar | sed
-e
"$$t" ; \
510 AR_FLAGS_FOR_TARGET
=
511 AR_CREATE_FOR_TARGET
= $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) rc
512 AR_EXTRACT_FOR_TARGET
= $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) x
513 LIPO_FOR_TARGET
= lipo
514 ORIGINAL_AS_FOR_TARGET
= @ORIGINAL_AS_FOR_TARGET@
515 RANLIB_FOR_TARGET
:= $(shell \
516 if
[ -f
$(objdir
)/..
/binutils
/ranlib
] ; then \
517 echo
$(objdir
)/..
/binutils
/ranlib
; \
519 if
[ "$(host)" = "$(target)" ] ; then \
522 t
='$(program_transform_name)'; echo ranlib | sed
-e
"$$t" ; \
525 ORIGINAL_LD_FOR_TARGET
= @ORIGINAL_LD_FOR_TARGET@
526 ORIGINAL_NM_FOR_TARGET
= @ORIGINAL_NM_FOR_TARGET@
528 STRIP_FOR_TARGET
:= $(shell \
529 if
[ -f
$(objdir
)/..
/binutils
/strip-new
] ; then \
530 echo
$(objdir
)/..
/binutils
/strip-new
; \
532 if
[ "$(host)" = "$(target)" ] ; then \
535 t
='$(program_transform_name)'; echo
strip | sed
-e
"$$t" ; \
543 # Where to find some libiberty headers.
544 HASHTAB_H
= $(srcdir)/..
/include/hashtab.h
545 OBSTACK_H
= $(srcdir)/..
/include/obstack.h
546 SPLAY_TREE_H
= $(srcdir)/..
/include/splay-tree.h
547 MD5_H
= $(srcdir)/..
/include/md5.h
548 XREGEX_H
= $(srcdir)/..
/include/xregex.h
549 FNMATCH_H
= $(srcdir)/..
/include/fnmatch.h
551 # Linker plugin API headers
552 LINKER_PLUGIN_API_H
= $(srcdir)/..
/include/plugin-api.h
554 # Default native SYSTEM_HEADER_DIR, to be overridden by targets.
555 NATIVE_SYSTEM_HEADER_DIR
= @NATIVE_SYSTEM_HEADER_DIR@
556 # Default cross SYSTEM_HEADER_DIR, to be overridden by targets.
557 ifeq (@
includedir@
,$(prefix)/include)
558 CROSS_SYSTEM_HEADER_DIR
= @CROSS_SYSTEM_HEADER_DIR@
560 CROSS_SYSTEM_HEADER_DIR
= @
includedir@
563 # autoconf sets SYSTEM_HEADER_DIR to one of the above.
564 # Purge it of unnecessary internal relative paths
565 # to directories that might not exist yet.
566 # The sed idiom for this is to repeat the search-and-replace until it doesn't match, using :a ... ta.
567 # Use single quotes here to avoid nested double- and backquotes, this
568 # macro is also used in a double-quoted context.
569 SYSTEM_HEADER_DIR
= `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e 's,[^/]*/\.\.\/,,' -e ta`
571 # Path to the system headers on the build machine.
572 BUILD_SYSTEM_HEADER_DIR
= `echo @BUILD_SYSTEM_HEADER_DIR@ | sed -e :a -e 's,[^/]*/\.\.\/,,' -e ta`
574 # Control whether to run fixincludes.
575 STMP_FIXINC
= @STMP_FIXINC@
577 # Test to see whether <limits.h> exists in the system header files.
578 LIMITS_H_TEST
= [ -f
$(BUILD_SYSTEM_HEADER_DIR
)/limits.h
]
580 # Directory for prefix to system directories, for
581 # each of $(system_prefix)/usr/include, $(system_prefix)/usr/lib, etc.
582 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
583 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
585 xmake_file
=@xmake_file@
586 tmake_file
=@tmake_file@
587 TM_ENDIAN_CONFIG
=@TM_ENDIAN_CONFIG@
588 TM_MULTILIB_CONFIG
=@TM_MULTILIB_CONFIG@
589 TM_MULTILIB_EXCEPTIONS_CONFIG
=@TM_MULTILIB_EXCEPTIONS_CONFIG@
590 out_file
=$(srcdir)/config
/@out_file@
591 out_object_file
=@out_object_file@
592 common_out_file
=$(srcdir)/common
/config
/@common_out_file@
593 common_out_object_file
=@common_out_object_file@
595 md_file
=$(srcdir)/common.md
$(srcdir)/config
/@md_file@
596 tm_file_list
=@tm_file_list@
597 tm_include_list
=@tm_include_list@
598 tm_defines
=@tm_defines@
599 tm_p_file_list
=@tm_p_file_list@
600 tm_p_include_list
=@tm_p_include_list@
601 tm_d_file_list
=@tm_d_file_list@
602 tm_d_include_list
=@tm_d_include_list@
603 tm_rust_file_list
=@tm_rust_file_list@
604 tm_rust_include_list
=@tm_rust_include_list@
605 build_xm_file_list
=@build_xm_file_list@
606 build_xm_include_list
=@build_xm_include_list@
607 build_xm_defines
=@build_xm_defines@
608 host_xm_file_list
=@host_xm_file_list@
609 host_xm_include_list
=@host_xm_include_list@
610 host_xm_defines
=@host_xm_defines@
611 xm_file_list
=@xm_file_list@
612 xm_include_list
=@xm_include_list@
613 xm_defines
=@xm_defines@
615 lang_checks_parallelized
=
616 lang_opt_files
=@lang_opt_files@
$(srcdir)/c-family
/c.opt
$(srcdir)/common.opt
$(srcdir)/params.opt
$(srcdir)/analyzer
/analyzer.opt
617 lang_specs_files
=@lang_specs_files@
618 lang_tree_files
=@lang_tree_files@
619 target_cpu_default
=@target_cpu_default@
620 OBJC_BOEHM_GC
=@objc_boehm_gc@
621 extra_modes_file
=@extra_modes_file@
622 extra_opt_files
=@extra_opt_files@
623 host_hook_obj
=@out_host_hook_obj@
626 enable_multiarch
= @enable_multiarch@
627 with_cpu
= @with_cpu@
628 with_float
= @with_float@
629 ifeq ($(enable_multiarch
),yes
)
632 ifeq ($(enable_multiarch
),auto
)
633 # SYSTEM_HEADER_DIR is makefile syntax, cannot be evaluated in configure.ac
634 if_multiarch
= $(if
$(wildcard $(shell echo
$(BUILD_SYSTEM_HEADER_DIR
))/..
/..
/usr
/lib
/*/crti.o
),$(1))
640 # ------------------------
641 # Installation directories
642 # ------------------------
644 # Common prefix for installation directories.
645 # NOTE: This directory must exist when you start installation.
647 # Directory in which to put localized header files. On the systems with
648 # gcc as the native cc, `local_prefix' may not be `prefix' which is
650 # NOTE: local_prefix *should not* default from prefix.
651 local_prefix
= @local_prefix@
652 # Directory in which to put host dependent programs and libraries
653 exec_prefix = @
exec_prefix@
654 # Directory in which to put the executable for the command `gcc'
656 # Directory in which to put the directories used by the compiler.
658 # Directory in which GCC puts its executables.
659 libexecdir
= @libexecdir@
665 # Directory in which the compiler finds libraries etc.
666 libsubdir
= $(libdir)/gcc
/$(real_target_noncanonical
)/$(version
)$(accel_dir_suffix
)
667 # Directory in which the compiler finds executables
668 libexecsubdir
= $(libexecdir
)/gcc
/$(real_target_noncanonical
)/$(version
)$(accel_dir_suffix
)
669 # Directory in which all plugin resources are installed
670 plugin_resourcesdir
= $(libsubdir
)/plugin
671 # Directory in which plugin headers are installed
672 plugin_includedir
= $(plugin_resourcesdir
)/include
673 # Directory in which plugin specific executables are installed
674 plugin_bindir
= $(libexecsubdir
)/plugin
675 # Used to produce a relative $(gcc_tooldir) in gcc.o
676 ifeq ($(enable_as_accelerator
),yes
)
677 unlibsubdir
= ..
/..
/..
/..
/..
679 unlibsubdir
= ..
/..
/..
681 # $(prefix), expressed as a path relative to $(libsubdir).
683 # An explanation of the sed strings:
684 # -e 's|^$(prefix)||' matches and eliminates 'prefix' from 'exec_prefix'
685 # -e 's|/$$||' match a trailing forward slash and eliminates it
686 # -e 's|^[^/]|/|' forces the string to start with a forward slash (*)
687 # -e 's|/[^/]*|../|g' replaces each occurrence of /<directory> with ../
689 # (*) Note this pattern overwrites the first character of the string
690 # with a forward slash if one is not already present. This is not a
691 # problem because the exact names of the sub-directories concerned is
692 # unimportant, just the number of them matters.
694 # The practical upshot of these patterns is like this:
696 # prefix exec_prefix result
697 # ------ ----------- ------
701 # /foo/ /foo/bar/ ../
702 # /foo /foo/bar/ugg ../../
703 libsubdir_to_prefix
:= \
704 $(unlibsubdir
)/$(shell echo
"$(libdir)" | \
705 sed
-e
's|^$(prefix)||' -e
's|/$$||' -e
's|^[^/]|/|' \
707 # $(exec_prefix), expressed as a path relative to $(prefix).
708 prefix_to_exec_prefix
:= \
709 $(shell echo
"$(exec_prefix)" | \
710 sed
-e
's|^$(prefix)||' -e
's|^/||' -e
'/./s|$$|/|')
711 # Directory in which to find other cross-compilation tools and headers.
713 # Used in install-cross.
714 gcc_tooldir
= @gcc_tooldir@
715 # Since gcc_tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
716 build_tooldir
= $(exec_prefix)/$(target_noncanonical
)
717 # Directory in which the compiler finds target-independent g++ includes.
718 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
719 gcc_gxx_include_dir_add_sysroot
= @gcc_gxx_include_dir_add_sysroot@
720 # Directory in which the compiler finds libc++ includes.
721 gcc_gxx_libcxx_include_dir
= @gcc_gxx_libcxx_include_dir@
722 gcc_gxx_libcxx_include_dir_add_sysroot
= @gcc_gxx_libcxx_include_dir_add_sysroot@
723 # Directory to search for site-specific includes.
724 local_includedir
= $(local_prefix
)/include
725 includedir = $(prefix)/include
726 # where the info files go
728 # Where cpp should go besides $prefix/bin if necessary
729 cpp_install_dir
= @cpp_install_dir@
730 # where the locale files go
732 localedir
= $(datadir)/locale
733 # Extension (if any) to put in installed man-page filename.
737 exeext
= @host_exeext@
738 build_exeext
= @build_exeext@
740 # Directory in which to put man pages.
742 man1dir = $(mandir)/man1
743 man7dir = $(mandir)/man7
744 # Dir for temp files.
747 datarootdir
= @datarootdir@
749 # Directory in which to put DVIs
751 # Directory in which to build HTML
752 build_htmldir
= $(objdir
)/HTML
/gcc-
$(version
)
753 # Directory in which to put HTML
756 # Whether we were configured with NLS.
759 # Internationalization library.
762 LIBINTL_DEP
= @LIBINTL_DEP@
764 # Character encoding conversion library.
765 LIBICONV
= @LIBICONV@
766 LIBICONV_DEP
= @LIBICONV_DEP@
768 # If a supplementary library is being used for the GC.
771 # "true" if the target C library headers are unavailable; "false"
773 inhibit_libc
= @inhibit_libc@
774 ifeq ($(inhibit_libc
),true
)
775 INHIBIT_LIBC_CFLAGS
= -Dinhibit_libc
778 # List of extra executables that should be compiled for this target machine
779 # that are used when linking.
780 # The rules for compiling them should be in the t-* file for the machine.
781 EXTRA_PROGRAMS
= @extra_programs@
783 # List of extra object files that should be compiled and linked with
784 # compiler proper (cc1, cc1obj, cc1plus).
785 EXTRA_OBJS
= @extra_objs@
787 # List of extra object files that should be compiled and linked with
789 EXTRA_GCC_OBJS
=@extra_gcc_objs@
791 # List of extra libraries that should be linked with the gcc driver.
792 EXTRA_GCC_LIBS
= @EXTRA_GCC_LIBS@
794 # List of additional header files to install.
795 EXTRA_HEADERS
=@extra_headers_list@
797 # How to handle <stdint.h>.
798 USE_GCC_STDINT
= @use_gcc_stdint@
800 # The configure script will set this to collect2$(exeext), except on a
801 # (non-Unix) host which cannot build collect2, for which it will be
803 COLLECT2
= @collect2@
805 # Program to convert libraries.
808 # Control whether header files are installed.
809 INSTALL_HEADERS
=install-headers install-mkheaders
811 # Control whether Info documentation is built and installed.
812 BUILD_INFO
= @BUILD_INFO@
814 # Control flags for @contents placement in HTML output
815 MAKEINFO_TOC_INLINE_FLAG
= @MAKEINFO_TOC_INLINE_FLAG@
817 # Control whether manpages generated by texi2pod.pl can be rebuilt.
818 GENERATED_MANPAGES
= @GENERATED_MANPAGES@
820 # Additional directories of header files to run fixincludes on.
821 # These should be directories searched automatically by default
822 # just as /usr/include is.
823 # *Do not* use this for directories that happen to contain
824 # header files, but are not searched automatically by default.
825 # On most systems, this is empty.
826 OTHER_FIXINCLUDES_DIRS
=
828 # A list of all the language-specific executables.
829 COMPILERS
= @all_compilers@
831 # List of things which should already be built whenever we try to use xgcc
832 # to compile anything (without linking).
833 GCC_PASSES
=xgcc
$(exeext
) specs
835 # Directory to link to, when using the target `maketest'.
838 # Native compiler for the build machine and its switches.
839 CC_FOR_BUILD
= @CC_FOR_BUILD@
840 CXX_FOR_BUILD
= @CXX_FOR_BUILD@
841 BUILD_CFLAGS
= @BUILD_CFLAGS@
$(GENERATOR_CFLAGS
) -DGENERATOR_FILE
842 BUILD_CXXFLAGS
= @BUILD_CXXFLAGS@
$(GENERATOR_CFLAGS
) -DGENERATOR_FILE
844 # Native compiler that we use. This may be C++ some day.
845 COMPILER_FOR_BUILD
= $(CXX_FOR_BUILD
)
846 BUILD_COMPILERFLAGS
= $(BUILD_CXXFLAGS
)
848 # Native linker that we use.
849 LINKER_FOR_BUILD
= $(CXX_FOR_BUILD
)
850 BUILD_LINKERFLAGS
= $(BUILD_CXXFLAGS
)
852 # Native linker and preprocessor flags. For x-fragment overrides.
853 BUILD_LDFLAGS
=@BUILD_LDFLAGS@
854 BUILD_CPPFLAGS
= -I.
-I
$(@D
) -I
$(srcdir) -I
$(srcdir)/$(@D
) \
855 -I
$(srcdir)/..
/include $(INCINTL
) $(CPPINC
) $(CPPFLAGS
)
857 # Actual name to use when installing a native compiler.
858 GCC_INSTALL_NAME
:= $(shell echo gcc|sed
'$(program_transform_name)')
859 GCC_TARGET_INSTALL_NAME
:= $(target_noncanonical
)-$(shell echo gcc|sed
'$(program_transform_name)')
860 CPP_INSTALL_NAME
:= $(shell echo
cpp|sed
'$(program_transform_name)')
861 GCOV_INSTALL_NAME
:= $(shell echo gcov|sed
'$(program_transform_name)')
862 GCOV_TOOL_INSTALL_NAME
:= $(shell echo gcov-tool|sed
'$(program_transform_name)')
863 GCOV_DUMP_INSTALL_NAME
:= $(shell echo gcov-dump|sed
'$(program_transform_name)')
865 # Setup the testing framework, if you have one
866 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
867 echo $${rootme}/../expect/expect ; \
868 else echo expect ; fi`
870 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
871 echo $${srcdir}/../dejagnu/runtest ; \
872 else echo runtest; fi`
875 # This should name the specs file that we're going to install. Target
876 # Makefiles may override it and name another file to be generated from
877 # the built-in specs and installed as the default spec, as long as
878 # they also introduce a rule to generate a file name specs, to be used
882 # Extra include files that are defined by HeaderInclude directives in
886 # Extra include files that are defined by SourceInclude directives in
888 OPTIONS_C_EXTRA
= $(PRETTY_PRINT_H
)
892 # End of variables for you to override.
894 # GTM_H lists the config files that the generator files depend on,
895 # while TM_H lists the ones ordinary gcc files depend on, which
896 # includes several files generated by those generators.
897 BCONFIG_H
= bconfig.h
$(build_xm_file_list
)
898 CONFIG_H
= config.h
$(host_xm_file_list
)
899 TCONFIG_H
= tconfig.h
$(xm_file_list
)
900 # Some $(target)-protos.h depends on tree.h
901 TM_P_H
= tm_p.h
$(tm_p_file_list
) $(TREE_H
)
902 TM_D_H
= tm_d.h
$(tm_d_file_list
)
903 TM_RUST_H
= tm_rust.h
$(tm_rust_file_list
)
904 GTM_H
= tm.h
$(tm_file_list
) insn-constants.h
905 TM_H
= $(GTM_H
) insn-flags.h
$(OPTIONS_H
)
907 # Variables for version information.
908 BASEVER
:= $(srcdir)/BASE-VER
# 4.x.y
909 DEVPHASE
:= $(srcdir)/DEV-PHASE
# experimental, prerelease, ""
910 DATESTAMP
:= $(srcdir)/DATESTAMP
# YYYYMMDD or empty
911 REVISION
:= $(srcdir)/REVISION
# [BRANCH revision XXXXXX]
913 BASEVER_c
:= $(shell cat
$(BASEVER
))
914 DEVPHASE_c
:= $(shell cat
$(DEVPHASE
))
915 DATESTAMP_c
:= $(shell cat
$(DATESTAMP
))
917 ifeq (,$(wildcard $(REVISION
)))
921 REVISION_c
:= $(shell cat
$(REVISION
))
924 version
:= $(shell @get_gcc_base_ver@
$(BASEVER
))
927 $(shell echo
$(BASEVER_c
) | sed
-e
's/^[0-9]*\.[0-9]*\.\([0-9]*\)$$/\1/')
930 # For use in version.cc - double quoted strings, with appropriate
931 # surrounding punctuation and spaces, and with the datestamp and
932 # development phase collapsed to the empty string in release mode
933 # (i.e. if DEVPHASE_c is empty and PATCHLEVEL_c is 0). The space
934 # immediately after the comma in the $(if ...) constructs is
935 # significant - do not remove it.
936 BASEVER_s
:= "\"$(BASEVER_c)\""
937 DEVPHASE_s
:= "\"$(if $(DEVPHASE_c), ($(DEVPHASE_c)))\""
939 "\"$(if $(DEVPHASE_c)$(filter-out 0,$(PATCHLEVEL_c)), $(DATESTAMP_c))\""
940 PKGVERSION_s
:= "\"@PKGVERSION@\""
941 BUGURL_s
:= "\"@REPORT_BUGS_TO@\""
943 PKGVERSION
:= @PKGVERSION@
944 BUGURL_TEXI
:= @REPORT_BUGS_TEXI@
948 "\"$(if $(DEVPHASE_c)$(filter-out 0,$(PATCHLEVEL_c)), $(REVISION_c))\""
953 # Shorthand variables for dependency lists.
954 DUMPFILE_H
= $(srcdir)/..
/libcpp
/include/line-map.h dumpfile.h
955 VEC_H
= vec.h statistics.h
$(GGC_H
)
956 HASH_TABLE_H
= $(HASHTAB_H
) hash-table.h
$(GGC_H
)
957 EXCEPT_H
= except.h
$(HASHTAB_H
)
958 TARGET_DEF
= target.def target-hooks-macros.h target-insns.def
959 C_TARGET_DEF
= c-family
/c-target.def target-hooks-macros.h
960 COMMON_TARGET_DEF
= common
/common-target.def target-hooks-macros.h
961 D_TARGET_DEF
= d
/d-target.def target-hooks-macros.h
962 RUST_TARGET_DEF
= rust
/rust-target.def target-hooks-macros.h
963 TARGET_H
= $(TM_H
) target.h
$(TARGET_DEF
) insn-modes.h insn-codes.h
964 C_TARGET_H
= c-family
/c-target.h
$(C_TARGET_DEF
)
965 COMMON_TARGET_H
= common
/common-target.h
$(INPUT_H
) $(COMMON_TARGET_DEF
)
966 D_TARGET_H
= d
/d-target.h
$(D_TARGET_DEF
)
967 RUST_TARGET_H
= rust
/rust-target.h
$(RUST_TARGET_DEF
)
968 MACHMODE_H
= machmode.h mode-classes.def
970 HOSTHOOKS_DEF_H
= hosthooks-def.h
$(HOOKS_H
)
971 LANGHOOKS_DEF_H
= langhooks-def.h
$(HOOKS_H
)
972 TARGET_DEF_H
= target-def.h target-hooks-def.h
$(HOOKS_H
) targhooks.h
973 C_TARGET_DEF_H
= c-family
/c-target-def.h c-family
/c-target-hooks-def.h \
974 $(TREE_H
) $(C_COMMON_H
) $(HOOKS_H
) common
/common-targhooks.h
975 CORETYPES_H
= coretypes.h insn-modes.h signop.h wide-int.h wide-int-print.h \
976 insn-modes-inline.h
$(MACHMODE_H
) double-int.h align.h poly-int.h \
978 RTL_BASE_H
= $(CORETYPES_H
) rtl.h rtl.def reg-notes.def \
979 insn-notes.def
$(INPUT_H
) $(REAL_H
) statistics.h
$(VEC_H
) \
980 $(FIXED_VALUE_H
) alias.h
$(HASHTAB_H
)
981 FIXED_VALUE_H
= fixed-value.h
982 RTL_H
= $(RTL_BASE_H
) $(FLAGS_H
) genrtl.h
983 READ_MD_H
= $(OBSTACK_H
) $(HASHTAB_H
) read-md.h
984 BUILTINS_DEF
= builtins.def sync-builtins.def omp-builtins.def \
985 gtm-builtins.def sanitizer.def
986 INTERNAL_FN_DEF
= internal-fn.def
987 INTERNAL_FN_H
= internal-fn.h
$(INTERNAL_FN_DEF
) insn-opinit.h
988 TREE_CORE_H
= tree-core.h
$(CORETYPES_H
) all-tree.def tree.def \
989 c-family
/c-common.def
$(lang_tree_files
) \
990 $(BUILTINS_DEF
) $(INPUT_H
) statistics.h \
991 $(VEC_H
) treestruct.def
$(HASHTAB_H
) \
992 alias.h
$(SYMTAB_H
) $(FLAGS_H
) \
993 $(REAL_H
) $(FIXED_VALUE_H
)
994 TREE_H
= tree.h
$(TREE_CORE_H
) tree-check.h
995 REGSET_H
= regset.h
$(BITMAP_H
) hard-reg-set.h
996 BASIC_BLOCK_H
= basic-block.h
$(PREDICT_H
) $(VEC_H
) $(FUNCTION_H
) \
997 cfg-flags.def cfghooks.h profile-count.h
998 GIMPLE_H
= gimple.h gimple.def gsstruct.def
$(VEC_H
) \
999 $(GGC_H
) $(BASIC_BLOCK_H
) $(TREE_H
) tree-ssa-operands.h \
1000 tree-ssa-alias.h
$(INTERNAL_FN_H
) $(HASH_TABLE_H
) is-a.h
1001 GCOV_IO_H
= gcov-io.h version.h auto-host.h gcov-counter.def
1002 RECOG_H
= recog.h
$(TREE_H
)
1003 EMIT_RTL_H
= emit-rtl.h
1004 FLAGS_H
= flags.h flag-types.h
$(OPTIONS_H
)
1005 OPTIONS_H
= options.h flag-types.h
$(OPTIONS_H_EXTRA
)
1006 FUNCTION_H
= function.h
$(HASHTAB_H
) $(TM_H
) hard-reg-set.h \
1008 EXPR_H
= expr.h insn-config.h
$(FUNCTION_H
) $(RTL_H
) $(FLAGS_H
) $(TREE_H
) \
1010 OPTABS_H
= optabs.h insn-codes.h insn-opinit.h
1011 REGS_H
= regs.h hard-reg-set.h
1012 CFGLOOP_H
= cfgloop.h
$(BASIC_BLOCK_H
) $(BITMAP_H
) sbitmap.h
1013 IPA_UTILS_H
= ipa-utils.h
$(TREE_H
) $(CGRAPH_H
)
1014 IPA_REFERENCE_H
= ipa-reference.h
$(BITMAP_H
) $(TREE_H
)
1015 CGRAPH_H
= cgraph.h
$(VEC_H
) $(TREE_H
) $(BASIC_BLOCK_H
) $(FUNCTION_H
) \
1016 cif-code.def ipa-ref.h
$(LINKER_PLUGIN_API_H
) is-a.h
1017 DF_H
= df.h
$(BITMAP_H
) $(REGSET_H
) sbitmap.h
$(BASIC_BLOCK_H
) \
1018 alloc-pool.h
$(TIMEVAR_H
)
1019 RESOURCE_H
= resource.h hard-reg-set.h
$(DF_H
)
1020 GCC_H
= gcc.h version.h
$(DIAGNOSTIC_CORE_H
)
1021 GGC_H
= ggc.h gtype-desc.h statistics.h
1022 TIMEVAR_H
= timevar.h timevar.def
1023 INSN_ATTR_H
= insn-attr.h insn-attr-common.h
$(INSN_ADDR_H
)
1024 INSN_ADDR_H
= $(srcdir)/insn-addr.h
1025 C_COMMON_H
= c-family
/c-common.h c-family
/c-common.def
$(TREE_H
) \
1026 $(SPLAY_TREE_H
) $(CPPLIB_H
) $(GGC_H
) $(DIAGNOSTIC_CORE_H
)
1027 C_PRAGMA_H
= c-family
/c-pragma.h
$(CPPLIB_H
)
1028 C_TREE_H
= c
/c-tree.h
$(C_COMMON_H
) $(DIAGNOSTIC_H
)
1029 SYSTEM_H
= system.h hwint.h
$(srcdir)/..
/include/libiberty.h \
1030 $(srcdir)/..
/include/safe-ctype.h
$(srcdir)/..
/include/filenames.h \
1032 PREDICT_H
= predict.h predict.def
1033 CPPLIB_H
= $(srcdir)/..
/libcpp
/include/line-map.h \
1034 $(srcdir)/..
/libcpp
/include/cpplib.h
1035 CODYLIB_H
= $(srcdir)/..
/libcody
/cody.hh
1036 INPUT_H
= $(srcdir)/..
/libcpp
/include/line-map.h input.h
1037 OPTS_H
= $(INPUT_H
) $(VEC_H
) opts.h
$(OBSTACK_H
)
1038 SYMTAB_H
= $(srcdir)/..
/libcpp
/include/symtab.h
$(OBSTACK_H
)
1039 CPP_INTERNAL_H
= $(srcdir)/..
/libcpp
/internal.h
1040 TREE_DUMP_H
= tree-dump.h
$(SPLAY_TREE_H
) $(DUMPFILE_H
)
1041 TREE_PASS_H
= tree-pass.h
$(TIMEVAR_H
) $(DUMPFILE_H
)
1042 TREE_SSA_H
= tree-ssa.h tree-ssa-operands.h \
1043 $(BITMAP_H
) sbitmap.h
$(BASIC_BLOCK_H
) $(GIMPLE_H
) \
1044 $(HASHTAB_H
) $(CGRAPH_H
) $(IPA_REFERENCE_H
) \
1046 PRETTY_PRINT_H
= pretty-print.h
$(INPUT_H
) $(OBSTACK_H
) wide-int-print.h
1047 TREE_PRETTY_PRINT_H
= tree-pretty-print.h
$(PRETTY_PRINT_H
)
1048 GIMPLE_PRETTY_PRINT_H
= gimple-pretty-print.h
$(TREE_PRETTY_PRINT_H
)
1049 DIAGNOSTIC_CORE_H
= diagnostic-core.h
$(INPUT_H
) bversion.h diagnostic.def
1050 DIAGNOSTIC_H
= diagnostic.h
$(DIAGNOSTIC_CORE_H
) $(PRETTY_PRINT_H
)
1051 C_PRETTY_PRINT_H
= c-family
/c-pretty-print.h
$(PRETTY_PRINT_H
) \
1052 $(C_COMMON_H
) $(TREE_H
)
1053 TREE_INLINE_H
= tree-inline.h
1055 LTO_STREAMER_H
= lto-streamer.h
$(LINKER_PLUGIN_API_H
) $(TARGET_H
) \
1056 $(CGRAPH_H
) $(VEC_H
) $(HASH_TABLE_H
) $(TREE_H
) $(GIMPLE_H
) \
1057 $(GCOV_IO_H
) $(DIAGNOSTIC_H
) alloc-pool.h
1058 IPA_PROP_H
= ipa-prop.h
$(TREE_H
) $(VEC_H
) $(CGRAPH_H
) $(GIMPLE_H
) alloc-pool.h
1059 BITMAP_H
= bitmap.h
$(HASHTAB_H
) statistics.h
1060 GCC_PLUGIN_H
= gcc-plugin.h highlev-plugin-common.h plugin.def \
1061 $(CONFIG_H
) $(SYSTEM_H
) $(HASHTAB_H
)
1062 PLUGIN_H
= plugin.h
$(GCC_PLUGIN_H
)
1063 PLUGIN_VERSION_H
= plugin-version.h configargs.h
1064 CONTEXT_H
= context.h
1065 GENSUPPORT_H
= gensupport.h read-md.h optabs.def
1066 RTL_SSA_H
= $(PRETTY_PRINT_H
) insn-config.h splay-tree-utils.h \
1067 $(RECOG_H
) $(REGS_H
) function-abi.h obstack-utils.h \
1068 mux-utils.h rtlanal.h memmodel.h
$(EMIT_RTL_H
) \
1069 rtl-ssa
/accesses.h rtl-ssa
/insns.h rtl-ssa
/blocks.h \
1070 rtl-ssa
/changes.h rtl-ssa
/functions.h rtl-ssa
/is-a.inl \
1071 rtl-ssa
/access-utils.h rtl-ssa
/insn-utils.h rtl-ssa
/movement.h \
1072 rtl-ssa
/change-utils.h rtl-ssa
/member-fns.inl
1075 # Now figure out from those variables how to compile and link.
1077 # IN_GCC distinguishes between code compiled into GCC itself and other
1078 # programs built during a bootstrap.
1079 # autoconf inserts -DCROSS_DIRECTORY_STRUCTURE if we are building a
1080 # cross compiler which does not use the native headers and libraries.
1081 INTERNAL_CFLAGS
= -DIN_GCC @CROSS@
1083 # This is the variable actually used when we compile. If you change this,
1084 # you probably want to update BUILD_CFLAGS in configure.ac
1085 ALL_CFLAGS
= $(T_CFLAGS
) $(CFLAGS-
$@
) \
1086 $(CFLAGS
) $(INTERNAL_CFLAGS
) $(COVERAGE_FLAGS
) $(WARN_CFLAGS
) @DEFS@
1089 ALL_CXXFLAGS
= $(T_CFLAGS
) $(CFLAGS-
$@
) $(CXXFLAGS
) $(INTERNAL_CFLAGS
) \
1090 $(COVERAGE_FLAGS
) $(ALIASING_FLAGS
) $(NOEXCEPTION_FLAGS
) \
1091 $(WARN_CXXFLAGS
) @DEFS@
1093 # Likewise. Put INCLUDES at the beginning: this way, if some autoconf macro
1094 # puts -I options in CPPFLAGS, our include files in the srcdir will always
1095 # win against random include files in /usr/include.
1096 ALL_CPPFLAGS
= $(INCLUDES
) $(CPPFLAGS
)
1098 # This is the variable to use when using $(COMPILER).
1099 ALL_COMPILERFLAGS
= $(ALL_CXXFLAGS
) $(PICFLAG
)
1101 # This is the variable to use when using $(LINKER).
1102 ALL_LINKERFLAGS
= $(ALL_CXXFLAGS
) $(LD_PICFLAG
)
1104 # Build and host support libraries.
1106 # Use the "pic" build of libiberty if --enable-host-shared or --enable-host-pie,
1107 # unless we are building for mingw.
1108 LIBIBERTY_PICDIR
=$(if
$(findstring mingw
,$(target
)),,pic
)
1109 ifneq ($(enable_host_shared
)$(enable_host_pie
),)
1110 LIBIBERTY
= ..
/libiberty
/$(LIBIBERTY_PICDIR
)/libiberty.a
1112 LIBIBERTY
= ..
/libiberty
/libiberty.a
1114 ifeq ($(enable_host_shared
),yes
)
1115 BUILD_LIBIBERTY
= $(build_libobjdir
)/libiberty
/$(LIBIBERTY_PICDIR
)/libiberty.a
1117 BUILD_LIBIBERTY
= $(build_libobjdir
)/libiberty
/libiberty.a
1120 # Dependencies on the intl and portability libraries.
1121 LIBDEPS
= libcommon.a
$(CPPLIB
) $(LIBIBERTY
) $(LIBINTL_DEP
) $(LIBICONV_DEP
) \
1122 $(LIBDECNUMBER
) $(LIBBACKTRACE
)
1124 # Likewise, for use in the tools that must run on this machine
1125 # even if we are cross-building GCC.
1126 BUILD_LIBDEPS
= $(BUILD_LIBIBERTY
)
1128 # How to link with both our special library facilities
1129 # and the system's installed libraries.
1130 LIBS
= @LIBS@ libcommon.a
$(CPPLIB
) $(LIBINTL
) $(LIBICONV
) $(LIBBACKTRACE
) \
1131 $(LIBIBERTY
) $(LIBDECNUMBER
) $(HOST_LIBS
)
1132 BACKENDLIBS
= $(ISLLIBS
) $(GMPLIBS
) $(PLUGINLIBS
) $(HOST_LIBS
) \
1134 # Any system libraries needed just for GNAT.
1135 SYSLIBS
= @GNAT_LIBEXC@
1137 # Used from ada/gcc-interface/Make-lang.in
1138 GNATBIND
= @GNATBIND@
1139 GNATMAKE
= @GNATMAKE@
1141 # Used from d/Make-lang.in
1143 GDCFLAGS
= @GDCFLAGS@
1145 # Libs needed (at present) just for jcf-dump.
1146 LDEXP_LIB
= @LDEXP_LIB@
1148 ZSTD_INC
= @ZSTD_CPPFLAGS@
1149 ZSTD_LIB
= @ZSTD_LDFLAGS@ @ZSTD_LIB@
1151 # Likewise, for use in the tools that must run on this machine
1152 # even if we are cross-building GCC.
1153 BUILD_LIBS
= $(BUILD_LIBIBERTY
)
1155 BUILD_RTL
= build
/rtl.o build
/read-rtl.o build
/ggc-none.o \
1156 build
/vec.o build
/min-insn-modes.o build
/gensupport.o \
1157 build
/print-rtl.o build
/hash-table.o build
/sort.o
1158 BUILD_MD
= build
/read-md.o
1159 BUILD_ERRORS
= build
/errors.o
1161 # Specify the directories to be searched for header files.
1162 # Both . and srcdir are used, in that order,
1163 # so that *config.h will be found in the compilation
1164 # subdirectory rather than in the source directory.
1165 # -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file
1166 # currently being compiled, in both source trees, to be examined as well.
1167 # libintl.h will be found in ../intl if we are using the included libintl.
1168 INCLUDES
= -I.
-I
$(@D
) -I
$(srcdir) -I
$(srcdir)/$(@D
) \
1169 -I
$(srcdir)/..
/include $(INCINTL
) \
1170 $(CPPINC
) $(CODYINC
) $(GMPINC
) $(DECNUMINC
) $(BACKTRACEINC
) \
1173 COMPILE.base
= $(COMPILER
) -c
$(ALL_COMPILERFLAGS
) $(ALL_CPPFLAGS
) -o
$@
1174 ifeq ($(CXXDEPMODE
),depmode
=gcc3
)
1175 # Note a subtlety here: we use $(@D) for the directory part, to make
1176 # things like the go/%.o rule work properly; but we use $(*F) for the
1177 # file part, as we just want the file part of the stem, not the entire
1179 COMPILE
= $(COMPILE.base
) -MT
$@
-MMD
-MP
-MF
$(@D
)/$(DEPDIR
)/$(*F
).TPo
1180 POSTCOMPILE
= @mv
$(@D
)/$(DEPDIR
)/$(*F
).TPo
$(@D
)/$(DEPDIR
)/$(*F
).Po
1182 COMPILE
= source
='$<' object
='$@' libtool
=no \
1183 DEPDIR
=$(DEPDIR
) $(CXXDEPMODE
) $(depcomp
) $(COMPILE.base
)
1192 # Support for additional languages (other than C).
1193 # C can be supported this way too (leave for later).
1195 LANG_CONFIGUREFRAGS
= @all_lang_configurefrags@
1196 LANG_MAKEFRAGS
= @all_lang_makefrags@
1198 # Used by gcc/jit/Make-lang.in
1199 LD_VERSION_SCRIPT_OPTION
= @ld_version_script_option@
1200 LD_SONAME_OPTION
= @ld_soname_option@
1201 @ENABLE_DARWIN_AT_RPATH_TRUE@DARWIN_RPATH
= @rpath
1202 @ENABLE_DARWIN_AT_RPATH_FALSE@DARWIN_RPATH
= ${libdir}
1204 # Flags to pass to recursive makes.
1205 # CC is set by configure.
1206 # ??? The choices here will need some experimenting with.
1208 export AR_FOR_TARGET
1209 export AR_CREATE_FOR_TARGET
1210 export AR_FLAGS_FOR_TARGET
1211 export AR_EXTRACT_FOR_TARGET
1214 export GCC_FOR_TARGET
1217 export LIPO_FOR_TARGET
1219 export NM_FOR_TARGET
1220 export STRIP_FOR_TARGET
1221 export RANLIB_FOR_TARGET
1225 "ADA_CFLAGS=$(ADA_CFLAGS)" \
1227 "BISONFLAGS=$(BISONFLAGS)" \
1228 "CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
1229 "LDFLAGS=$(LDFLAGS)" \
1231 "FLEXFLAGS=$(FLEXFLAGS)" \
1232 "INSTALL=$(INSTALL)" \
1233 "INSTALL_DATA=$(INSTALL_DATA)" \
1234 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
1235 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
1238 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
1239 "MAKEINFO=$(MAKEINFO)" \
1240 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
1243 "TFLAGS=$(TFLAGS)" \
1244 "exeext=$(exeext)" \
1245 "build_exeext=$(build_exeext)" \
1246 "objext=$(objext)" \
1247 "exec_prefix=$(exec_prefix)" \
1248 "prefix=$(prefix)" \
1249 "local_prefix=$(local_prefix)" \
1250 "gxx_include_dir=$(gcc_gxx_include_dir)" \
1251 "gxx_libcxx_include_dir=$(gcc_gxx_libcxx_include_dir)" \
1252 "build_tooldir=$(build_tooldir)" \
1253 "gcc_tooldir=$(gcc_tooldir)" \
1254 "bindir=$(bindir)" \
1255 "libexecsubdir=$(libexecsubdir)" \
1256 "datarootdir=$(datarootdir)" \
1257 "datadir=$(datadir)" \
1258 "libsubdir=$(libsubdir)" \
1259 "localedir=$(localedir)"
1261 # Lists of files for various purposes.
1263 # All option source files
1264 ALL_OPT_FILES
=$(lang_opt_files
) $(extra_opt_files
)
1266 # Target specific, C specific object file
1267 C_TARGET_OBJS
=@c_target_objs@
1269 # Target specific, C++ specific object file
1270 CXX_TARGET_OBJS
=@cxx_target_objs@
1272 # Target specific, D specific object file
1273 D_TARGET_OBJS
=@d_target_objs@
1275 # Target specific, Fortran specific object file
1276 FORTRAN_TARGET_OBJS
=@fortran_target_objs@
1278 # Target specific, Rust specific object file
1279 RUST_TARGET_OBJS
=@rust_target_objs@
1281 # Object files for gcc many-languages driver.
1282 GCC_OBJS
= gcc.o gcc-main.o ggc-none.o
1284 c-family-warn
= $(STRICT_WARN
)
1286 # Language-specific object files shared by all C-family front ends.
1287 C_COMMON_OBJS
= c-family
/c-common.o c-family
/c-cppbuiltin.o c-family
/c-dump.o \
1288 c-family
/c-format.o c-family
/c-gimplify.o c-family
/c-indentation.o \
1289 c-family
/c-lex.o c-family
/c-omp.o c-family
/c-opts.o c-family
/c-pch.o \
1290 c-family
/c-ppoutput.o c-family
/c-pragma.o c-family
/c-pretty-print.o \
1291 c-family
/c-semantics.o c-family
/c-ada-spec.o \
1292 c-family
/c-ubsan.o c-family
/known-headers.o \
1293 c-family
/c-attribs.o c-family
/c-warn.o c-family
/c-spellcheck.o
1295 # Analyzer object files
1297 analyzer
/access-diagram.o \
1298 analyzer
/analysis-plan.o \
1299 analyzer
/analyzer.o \
1300 analyzer
/analyzer-language.o \
1301 analyzer
/analyzer-logging.o \
1302 analyzer
/analyzer-pass.o \
1303 analyzer
/analyzer-selftests.o \
1304 analyzer
/bar-chart.o \
1305 analyzer
/bounds-checking.o \
1306 analyzer
/call-details.o \
1307 analyzer
/call-info.o \
1308 analyzer
/call-string.o \
1309 analyzer
/call-summary.o \
1310 analyzer
/checker-event.o \
1311 analyzer
/checker-path.o \
1312 analyzer
/complexity.o \
1313 analyzer
/constraint-manager.o \
1314 analyzer
/diagnostic-manager.o \
1316 analyzer
/feasible-graph.o \
1317 analyzer
/function-set.o \
1318 analyzer
/infinite-recursion.o \
1320 analyzer
/kf-analyzer.o \
1321 analyzer
/kf-lang-cp.o \
1322 analyzer
/known-function-manager.o \
1323 analyzer
/pending-diagnostic.o \
1324 analyzer
/program-point.o \
1325 analyzer
/program-state.o \
1328 analyzer
/region-model.o \
1329 analyzer
/region-model-asm.o \
1330 analyzer
/region-model-manager.o \
1331 analyzer
/region-model-reachability.o \
1333 analyzer
/sm-file.o \
1335 analyzer
/sm-malloc.o \
1336 analyzer
/sm-pattern-test.o \
1337 analyzer
/sm-sensitive.o \
1338 analyzer
/sm-signal.o \
1339 analyzer
/sm-taint.o \
1340 analyzer
/state-purge.o \
1342 analyzer
/supergraph.o \
1345 analyzer
/trimmed-graph.o \
1348 # Language-independent object files.
1349 # We put the *-match.o and insn-*.o files first so that a parallel make
1350 # will build them sooner, because they are large and otherwise tend to be
1351 # the last objects to finish building.
1353 $(GIMPLE_MATCH_PD_SEQ_O
) \
1354 gimple-match-exports.o \
1355 $(GENERIC_MATCH_PD_SEQ_O
) \
1370 adjust-alignment.o \
1402 combine-stack-adj.o \
1406 coroutine-passes.o \
1414 data-streamer-in.o \
1415 data-streamer-out.o \
1448 fold-mem-offsets.o \
1453 gcc-rich-location.o \
1459 gimple-array-bounds.o \
1462 gimple-if-to-switch.o \
1465 gimple-harden-conditionals.o \
1466 gimple-harden-control-flow.o \
1468 gimple-loop-interchange.o \
1470 gimple-loop-versioning.o \
1472 gimple-lower-bitint.o \
1473 gimple-predicate-analysis.o \
1474 gimple-pretty-print.o \
1476 gimple-range-cache.o \
1477 gimple-range-edge.o \
1478 gimple-range-fold.o \
1479 gimple-range-gori.o \
1480 gimple-range-infer.o \
1482 gimple-range-phi.o \
1483 gimple-range-trace.o \
1484 gimple-ssa-backprop.o \
1485 gimple-ssa-isolate-paths.o \
1486 gimple-ssa-nonnull-compare.o \
1487 gimple-ssa-split-paths.o \
1488 gimple-ssa-store-merging.o \
1489 gimple-ssa-strength-reduction.o \
1490 gimple-ssa-sprintf.o \
1491 gimple-ssa-warn-access.o \
1492 gimple-ssa-warn-alloca.o \
1493 gimple-ssa-warn-restrict.o \
1494 gimple-streamer-in.o \
1495 gimple-streamer-out.o \
1497 gimple-warn-recursion.o \
1505 graphite-isl-ast-to-gimple.o \
1506 graphite-dependences.o \
1507 graphite-optimize-isl.o \
1509 graphite-scop-detection.o \
1510 graphite-sese-to-poly.o \
1527 ipa-polymorphic-call.o \
1531 ipa-free-lang-data.o \
1533 ipa-inline-analysis.o \
1534 ipa-inline-transform.o \
1540 ipa-param-manipulation.o \
1569 lra-eliminations.o \
1576 lto-streamer-out.o \
1589 omp-oacc-kernels-decompose.o \
1590 omp-oacc-neuter-broadcast.o \
1598 optinfo-emit-json.o \
1601 ordered-hash-map-tests.o \
1609 print-rtl-function.o \
1619 read-rtl-function.o \
1633 rtl-ssa
/accesses.o \
1636 rtl-ssa
/functions.o \
1643 rtx-vector-builder.o \
1652 selftest-run-tests.o \
1659 splay-tree-utils.o \
1668 substring-locations.o \
1689 tree-diagnostic-client-data-hooks.o \
1690 tree-diagnostic-path.o \
1698 tree-logical-location.o \
1699 tree-loop-distribution.o \
1702 tree-object-size.o \
1707 tree-pretty-print.o \
1709 tree-scalar-evolution.o \
1711 tree-switch-conversion.o \
1712 tree-ssa-address.o \
1715 tree-ssa-coalesce.o \
1720 tree-ssa-forwprop.o \
1721 tree-ssa-ifcombine.o \
1723 tree-ssa-loop-ch.o \
1724 tree-ssa-loop-im.o \
1725 tree-ssa-loop-ivcanon.o \
1726 tree-ssa-loop-ivopts.o \
1727 tree-ssa-loop-manip.o \
1728 tree-ssa-loop-niter.o \
1729 tree-ssa-loop-prefetch.o \
1730 tree-ssa-loop-split.o \
1731 tree-ssa-loop-unswitch.o \
1733 tree-ssa-math-opts.o \
1734 tree-ssa-operands.o \
1735 gimple-range-path.o \
1737 tree-ssa-phiprop.o \
1739 tree-ssa-propagate.o \
1740 tree-ssa-reassoc.o \
1742 tree-ssa-scopedtables.o \
1745 tree-ssa-structalias.o \
1746 tree-ssa-tail-merge.o \
1748 tree-ssa-threadbackward.o \
1749 tree-ssa-threadedge.o \
1750 tree-ssa-threadupdate.o \
1751 tree-ssa-uncprop.o \
1757 tree-streamer-in.o \
1758 tree-streamer-out.o \
1760 tree-vect-generic.o \
1762 tree-vect-patterns.o \
1763 tree-vect-data-refs.o \
1766 tree-vect-loop-manip.o \
1768 tree-vect-slp-patterns.o \
1770 tree-vector-builder.o \
1774 typed-splay-tree.o \
1776 value-pointer-equiv.o \
1779 value-range-pretty-print.o \
1780 value-range-storage.o \
1786 vec-perm-indices.o \
1794 $(out_object_file
) \
1799 # Objects in libcommon.a, potentially used by all host binaries and with
1800 # no target dependencies.
1801 OBJS-libcommon
= diagnostic-spec.o diagnostic.o diagnostic-color.o \
1802 diagnostic-format-json.o \
1803 diagnostic-format-sarif.o \
1804 diagnostic-show-locus.o \
1806 pretty-print.o intl.o \
1809 vec.o input.o hash-table.o ggc-none.o memory-block.o \
1810 selftest.o selftest-diagnostic.o
sort.o \
1811 text-art
/box-drawing.o \
1814 text-art
/selftests.o \
1816 text-art
/styled-string.o \
1821 # Objects in libcommon-target.a, used by drivers and by the core
1822 # compiler and containing target-dependent code.
1823 OBJS-libcommon-target
= $(common_out_object_file
) prefix.o \
1824 opts.o opts-common.o options.o vec.o hooks.o common
/common-targhooks.o \
1825 hash-table.o file-find.o spellcheck.o selftest.o opt-suggestions.o
1827 # This lists all host objects for the front ends.
1828 ALL_HOST_FRONTEND_OBJS
= $(foreach v
,$(CONFIG_LANGUAGES
),$($(v
)_OBJS
))
1830 ALL_HOST_BACKEND_OBJS
= $(GCC_OBJS
) $(OBJS
) $(OBJS-libcommon
) \
1831 $(OBJS-libcommon-target
) main.o c-family
/cppspec.o \
1832 $(COLLECT2_OBJS
) $(EXTRA_GCC_OBJS
) $(GCOV_OBJS
) $(GCOV_DUMP_OBJS
) \
1833 $(GCOV_TOOL_OBJS
) $(GENGTYPE_OBJS
) gcc-ar.o gcc-nm.o gcc-ranlib.o \
1834 lto-wrapper.o collect-utils.o
1836 # for anything that is shared use the cc1plus profile data, as that
1837 # is likely the most exercised during the build
1838 ifeq ($(if
$(wildcard ..
/stage_current
),$(shell cat \
1839 ..
/stage_current
)),stageautofeedback
)
1840 $(ALL_HOST_BACKEND_OBJS
): ALL_COMPILERFLAGS
+= -fauto-profile
=cc1plus.fda
1841 $(ALL_HOST_BACKEND_OBJS
): cc1plus.fda
1844 # This lists all host object files, whether they are included in this
1845 # compilation or not.
1846 ALL_HOST_OBJS
= $(ALL_HOST_FRONTEND_OBJS
) $(ALL_HOST_BACKEND_OBJS
)
1848 BACKEND
= libbackend.a main.o libcommon-target.a libcommon.a \
1849 $(CPPLIB
) $(LIBDECNUMBER
)
1851 # This is defined to "yes" if Tree checking is enabled, which roughly means
1852 # front-end checking.
1853 TREECHECKING
= @TREECHECKING@
1855 # The full name of the driver on installation
1856 FULL_DRIVER_NAME
=$(target_noncanonical
)-gcc-
$(version
)$(exeext
)
1858 MOSTLYCLEANFILES
= insn-flags.h insn-config.h insn-codes.h \
1859 insn-output.
cc insn-recog.
cc insn-emit.
cc insn-extract.
cc insn-peep.
cc \
1860 insn-attr.h insn-attr-common.h insn-attrtab.
cc insn-dfatab.
cc \
1861 insn-latencytab.
cc insn-opinit.
cc insn-opinit.h insn-preds.
cc insn-constants.h \
1862 tm-preds.h tm-constrs.h checksum-options
$(GIMPLE_MATCH_PD_SEQ_SRC
) \
1863 $(GENERIC_MATCH_PD_SEQ_SRC
) gimple-match-auto.h generic-match-auto.h \
1864 tree-check.h min-insn-modes.
cc insn-modes.
cc insn-modes.h insn-modes-inline.h \
1865 genrtl.h gt-
*.h gtype-
*.h gtype-desc.
cc gtyp-input.list \
1866 case-cfn-macros.h cfn-operators.pd \
1867 xgcc
$(exeext
) cpp$(exeext
) $(FULL_DRIVER_NAME
) \
1868 $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
1869 $(SPECS
) collect2
$(exeext
) gcc-ar
$(exeext
) gcc-nm
$(exeext
) \
1870 gcc-ranlib
$(exeext
) \
1871 genversion
$(build_exeext
) gcov
$(exeext
) gcov-dump
$(exeext
) \
1872 gcov-tool
$(exeect
) \
1873 gengtype
$(exeext
) *.
[0-9][0-9].
* *.
[si
] *-checksum.
cc libbackend.a \
1874 libcommon-target.a libcommon.a libgcc.mk perf.data
1876 # This symlink makes the full installation name of the driver be available
1877 # from within the *build* directory, for use when running the JIT library
1878 # from there (e.g. when running its testsuite).
1879 $(FULL_DRIVER_NAME
): .
/xgcc
$(exeext
)
1884 # SELFTEST_DEPS need to be set before including language makefile fragments.
1885 # Otherwise $(SELFTEST_DEPS) is empty when used from <LANG>/Make-lang.in.
1886 SELFTEST_DEPS
= $(GCC_PASSES
) stmp-int-hdrs
$(srcdir)/testsuite
/selftests
1888 DO_LINK_SERIALIZATION
= @DO_LINK_SERIALIZATION@
1890 # Language makefile fragments.
1892 # The following targets define the interface between us and the languages.
1894 # all.cross, start.encap, rest.encap,
1895 # install-common, install-info, install-man,
1897 # mostlyclean, clean, distclean, maintainer-clean,
1899 # Each language is linked in with a series of hooks. The name of each
1900 # hooked is "lang.${target_name}" (eg: lang.info). Configure computes
1901 # and adds these here. We use double-colon rules for some of the hooks;
1902 # double-colon rules should be preferred for any new hooks.
1904 # language hooks, generated by configure
1907 ifeq ($(DO_LINK_SERIALIZATION
),)
1910 LINK_PROGRESS
= msg
="Linking $@ |"; cnt
=0; if
test "$(2)" = start
; then \
1911 idx
=0; cnt2
=$(DO_LINK_SERIALIZATION
); \
1912 while
test $$cnt2 -le
$(1); do msg
="$${msg}=="; cnt2
=`expr $$cnt2 + 1`; idx
=`expr $$idx + 1`; done
; \
1914 while
test $$cnt -lt
$(1); do msg
="$${msg}>>"; cnt
=`expr $$cnt + 1`; done
; \
1915 msg
="$${msg}--"; cnt
=`expr $$cnt + 1`; \
1917 idx
=`expr $(1) + 1`; \
1918 while
test $$cnt -le
$(1); do msg
="$${msg}=="; cnt
=`expr $$cnt + 1`; done
; \
1920 while
test $$cnt -lt
$(SERIAL_COUNT
); do msg
="$${msg} "; cnt
=`expr $$cnt + 1`; done
; \
1921 msg
="$${msg}| `expr 100 \* $$idx / $(SERIAL_COUNT)`%"; echo
"$$msg"
1924 # Wire in install-gnatlib invocation with `make install' for a configuration
1925 # with top-level libada disabled.
1926 gnat_install_lib
= @gnat_install_lib@
1928 # per-language makefile fragments
1929 -include $(LANG_MAKEFRAGS
)
1931 # target and host overrides must follow the per-language makefile fragments
1932 # so they can override or augment language-specific variables
1935 -include $(tmake_file
)
1938 -include $(xmake_file
)
1940 # all-tree.def includes all the tree.def files.
1941 all-tree.def
: s-alltree
; @true
1943 rm -f tmp-all-tree.def
1944 echo
'#include "tree.def"' > tmp-all-tree.def
1945 echo
'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
1946 echo
'#include "c-family/c-common.def"' >> tmp-all-tree.def
1947 ltf
="$(lang_tree_files)"; for f in
$$ltf; do \
1948 echo
"#include \"$$f\""; \
1949 done | sed
's|$(srcdir)/||' >> tmp-all-tree.def
1950 $(SHELL
) $(srcdir)/..
/move-if-change tmp-all-tree.def all-tree.def
1953 # Now that LANG_MAKEFRAGS are included, we can add special flags to the
1954 # objects that belong to the front ends. We add an extra define that
1955 # causes back-end specific include files to be poisoned, in the hope that
1956 # we can avoid introducing dependencies of the front ends on things that
1957 # no front end should ever look at (e.g. everything RTL related).
1958 $(foreach file
,$(ALL_HOST_FRONTEND_OBJS
),$(eval CFLAGS-
$(file
) += -DIN_GCC_FRONTEND
))
1962 # -----------------------------
1963 # Rebuilding this configuration
1964 # -----------------------------
1966 # On the use of stamps:
1967 # Consider the example of tree-check.h. It is constructed with build/gencheck.
1968 # A simple rule to build tree-check.h would be
1969 # tree-check.h: build/gencheck$(build_exeext)
1970 # $(RUN_GEN) build/gencheck$(build_exeext) > tree-check.h
1972 # but tree-check.h doesn't change every time gencheck changes. It would the
1973 # nice if targets that depend on tree-check.h wouldn't be rebuild
1974 # unnecessarily when tree-check.h is unchanged. To make this, tree-check.h
1975 # must not be overwritten with a identical copy. One solution is to use a
1977 # tree-check.h: build/gencheck$(build_exeext)
1978 # $(RUN_GEN) build/gencheck$(build_exeext) > tmp-check.h
1979 # $(SHELL) $(srcdir)/../move-if-change tmp-check.h tree-check.h
1981 # This solution has a different problem. Since the time stamp of tree-check.h
1982 # is unchanged, make will try to update tree-check.h every time it runs.
1983 # To prevent this, one can add a stamp
1984 # tree-check.h: s-check
1985 # s-check : build/gencheck$(build_exeext)
1986 # $(RUN_GEN) build/gencheck$(build_exeext) > tmp-check.h
1987 # $(SHELL) $(srcdir)/../move-if-change tmp-check.h tree-check.h
1990 # The problem with this solution is that make thinks that tree-check.h is
1991 # always unchanged. Make must be deceived into thinking that tree-check.h is
1992 # rebuild by the "tree-check.h: s-check" rule. To do this, add a dummy command:
1993 # tree-check.h: s-check; @true
1994 # s-check : build/gencheck$(build_exeext)
1995 # $(RUN_GEN) build/gencheck$(build_exeext) > tmp-check.h
1996 # $(SHELL) $(srcdir)/../move-if-change tmp-check.h tree-check.h
1999 # This is what is done in this makefile. Note that mkconfig.sh has a
2000 # move-if-change built-in
2002 Makefile
: config.status
$(srcdir)/Makefile.in
$(LANG_MAKEFRAGS
)
2003 LANGUAGES
="$(CONFIG_LANGUAGES)" \
2005 CONFIG_SHELL
="$(SHELL)" \
2006 CONFIG_FILES
=$@
$(SHELL
) config.status
2008 config.h
: cs-config.h
; @true
2009 bconfig.h
: cs-bconfig.h
; @true
2010 tconfig.h
: cs-tconfig.h
; @true
2011 tm.h
: cs-tm.h
; @true
2012 tm_p.h
: cs-tm_p.h
; @true
2013 tm_d.h
: cs-tm_d.h
; @true
2014 tm_rust.h
: cs-tm_rust.h
; @true
2016 cs-config.h
: Makefile
2017 TARGET_CPU_DEFAULT
="" \
2018 HEADERS
="$(host_xm_include_list)" DEFINES
="$(host_xm_defines)" \
2019 $(SHELL
) $(srcdir)/mkconfig.sh config.h
2021 cs-bconfig.h
: Makefile
2022 TARGET_CPU_DEFAULT
="" \
2023 HEADERS
="$(build_xm_include_list)" DEFINES
="$(build_xm_defines)" \
2024 $(SHELL
) $(srcdir)/mkconfig.sh bconfig.h
2026 cs-tconfig.h
: Makefile
2027 TARGET_CPU_DEFAULT
="" \
2028 HEADERS
="$(xm_include_list)" DEFINES
="USED_FOR_TARGET $(xm_defines)" \
2029 $(SHELL
) $(srcdir)/mkconfig.sh tconfig.h
2032 @ENABLE_DARWIN_AT_RPATH_FALSE@ TARGET_CPU_DEFAULT
="$(target_cpu_default)" \
2033 @ENABLE_DARWIN_AT_RPATH_FALSE@ HEADERS
="$(tm_include_list)" DEFINES
="$(tm_defines)" \
2034 @ENABLE_DARWIN_AT_RPATH_FALSE@
$(SHELL
) $(srcdir)/mkconfig.sh tm.h
2035 @ENABLE_DARWIN_AT_RPATH_TRUE@ TARGET_CPU_DEFAULT
="$(target_cpu_default)" \
2036 @ENABLE_DARWIN_AT_RPATH_TRUE@ HEADERS
="$(tm_include_list)" DEFINES
="$(tm_defines) DARWIN_AT_RPATH=1" \
2037 @ENABLE_DARWIN_AT_RPATH_TRUE@
$(SHELL
) $(srcdir)/mkconfig.sh tm.h
2040 TARGET_CPU_DEFAULT
="" \
2041 HEADERS
="$(tm_p_include_list)" DEFINES
="" \
2042 $(SHELL
) $(srcdir)/mkconfig.sh tm_p.h
2045 TARGET_CPU_DEFAULT
="" \
2046 HEADERS
="$(tm_d_include_list)" DEFINES
="" \
2047 $(SHELL
) $(srcdir)/mkconfig.sh tm_d.h
2049 cs-tm_rust.h
: Makefile
2050 TARGET_CPU_DEFAULT
="" \
2051 HEADERS
="$(tm_rust_include_list)" DEFINES
="" \
2052 $(SHELL
) $(srcdir)/mkconfig.sh tm_rust.h
2054 # Don't automatically run autoconf, since configure.ac might be accidentally
2055 # newer than configure. Also, this writes into the source directory which
2056 # might be on a read-only file system. If configured for maintainer mode
2057 # then do allow autoconf to be run.
2061 ACLOCAL_AMFLAGS
= -I ..
/config
-I ..
2063 $(srcdir)/..
/libtool.m4 \
2064 $(srcdir)/..
/ltoptions.m4 \
2065 $(srcdir)/..
/ltsugar.m4 \
2066 $(srcdir)/..
/ltversion.m4 \
2067 $(srcdir)/..
/lt~obsolete.m4 \
2068 $(srcdir)/..
/config
/acx.m4 \
2069 $(srcdir)/..
/config
/codeset.m4 \
2070 $(srcdir)/..
/config
/depstand.m4 \
2071 $(srcdir)/..
/config
/dfp.m4 \
2072 $(srcdir)/..
/config
/gcc-plugin.m4 \
2073 $(srcdir)/..
/config
/gettext-sister.m4 \
2074 $(srcdir)/..
/config
/iconv.m4 \
2075 $(srcdir)/..
/config
/lcmessage.m4 \
2076 $(srcdir)/..
/config
/lead-dot.m4 \
2077 $(srcdir)/..
/config
/lib-ld.m4 \
2078 $(srcdir)/..
/config
/lib-link.m4 \
2079 $(srcdir)/..
/config
/lib-prefix.m4 \
2080 $(srcdir)/..
/config
/mmap.m4 \
2081 $(srcdir)/..
/config
/override.m4 \
2082 $(srcdir)/..
/config
/picflag.m4 \
2083 $(srcdir)/..
/config
/progtest.m4 \
2084 $(srcdir)/..
/config
/stdint.m4 \
2085 $(srcdir)/..
/config
/warnings.m4 \
2086 $(srcdir)/..
/config
/zlib.m4 \
2087 $(srcdir)/acinclude.m4
2089 $(srcdir)/configure
: @MAINT@
$(srcdir)/configure.ac
$(srcdir)/aclocal.m4
2090 (cd
$(srcdir) && $(AUTOCONF
))
2092 $(srcdir)/aclocal.m4
: @MAINT@
$(aclocal_deps
)
2093 (cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
))
2095 # cstamp-h.in controls rebuilding of config.in.
2096 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
2097 # delete it. A stamp file is needed as autoheader won't update the file if
2098 # nothing has changed.
2099 # It remains in the source directory and is part of the distribution.
2100 # This follows what is done in shellutils, fileutils, etc.
2101 # "echo timestamp" is used instead of touch to be consistent with other
2102 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
2103 # ??? Newer versions have a maintainer mode that may be useful here.
2105 # Don't run autoheader automatically either.
2106 # Only run it if maintainer mode is enabled.
2107 @MAINT@ AUTOHEADER
= autoheader
2108 @MAINT@
$(srcdir)/config.in
: $(srcdir)/cstamp-h.in
2109 @MAINT@
$(srcdir)/cstamp-h.in
: $(srcdir)/configure.ac
2110 @MAINT@
(cd
$(srcdir) && $(AUTOHEADER
))
2111 @MAINT@ @
rm -f
$(srcdir)/cstamp-h.in
2112 @MAINT@ echo timestamp
> $(srcdir)/cstamp-h.in
2113 auto-host.h
: cstamp-h
; @true
2114 cstamp-h
: config.in config.status
2115 CONFIG_HEADERS
=auto-host.h
:config.in \
2117 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
2119 # On configurations that require auto-build.h, it is created while
2120 # running configure, so make config.status depend on it, so that
2121 # config.status --recheck runs and updates or creates it.
2122 @HAVE_AUTO_BUILD@auto-build.h
: $(srcdir)/configure
$(srcdir)/config.gcc
2123 @HAVE_AUTO_BUILD@ @if
test -f
$@
; then echo rerunning config.status to update
$@
; \
2124 @HAVE_AUTO_BUILD@
else echo rerunning config.status to update
$@
; fi
2125 @HAVE_AUTO_BUILD@config.status
: auto-build.h
2127 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
2128 # a target to build even if it is up-to-date. So we must verify that
2129 # config.status does not exist before failing.
2130 config.status
: $(srcdir)/configure
$(srcdir)/config.gcc
$(LANG_CONFIGUREFRAGS
)
2131 @if
[ ! -f config.status
] ; then \
2132 echo You must configure gcc. Look at http
://gcc.gnu.org
/install/ for details.
; \
2135 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
2142 # Provide quickstrap as a target that people can type into the gcc directory,
2143 # and that fails if you're not into it.
2145 cd
$(toplevel_builddir
) && $(MAKE
) all-target-libgcc
2147 all.internal
: start.encap rest.encap doc selftest
2148 # This is what to compile if making a cross-compiler.
2149 all.cross
: native gcc-cross
$(exeext
) cpp$(exeext
) specs \
2150 libgcc-support lang.
all.cross doc selftest @GENINSRC@ srcextra
2151 # This is what must be made before installing GCC and converting libraries.
2152 start.encap
: native xgcc
$(exeext
) cpp$(exeext
) specs \
2153 libgcc-support lang.start.encap @GENINSRC@ srcextra
2154 # These can't be made until after GCC can run.
2155 rest.encap
: lang.rest.encap
2156 # This is what is made with the host's compiler
2157 # whether making a cross compiler or not.
2158 native
: config.status auto-host.h build-@POSUB@
$(LANGUAGES
) \
2159 $(EXTRA_PROGRAMS
) $(COLLECT2
) lto-wrapper
$(exeext
) \
2160 gcc-ar
$(exeext
) gcc-nm
$(exeext
) gcc-ranlib
$(exeext
)
2162 ifeq ($(enable_plugin
),yes
)
2163 native
: gengtype
$(exeext
)
2166 # On the target machine, finish building a cross compiler.
2167 # This does the things that can't be done on the host machine.
2171 # Specify a dummy input file to placate the driver.
2172 # Specify -nostdinc to work around missing WIND_BASE environment variable
2173 # required for *-wrs-vxworks-* targets.
2174 # Specify -o /dev/null so the output of -S is discarded. More importantly
2175 # It does not try to create a file with the name "null.s" on POSIX and
2176 # "nul.s" on Windows. Because on Windows "nul" is a reserved file name.
2177 # Beware that /dev/null is not available to mingw tools, so directly use
2178 # "nul" instead of "/dev/null" if we're building on a mingw machine.
2179 # Specify the path to gcc/testsuite/selftests within the srcdir
2180 # as an argument to -fself-test.
2181 DEVNULL
=$(if
$(findstring mingw
,$(build
)),nul
,/dev
/null
)
2182 SELFTEST_FLAGS
= -nostdinc
$(DEVNULL
) -S
-o
$(DEVNULL
) \
2183 -fself-test
=$(srcdir)/testsuite
/selftests
2185 # Run the selftests during the build once we have a driver and the frontend,
2186 # so that self-test failures are caught as early as possible.
2187 # Use "s-selftest-FE" to ensure that we only run the selftests if the
2188 # driver, frontend, or selftest data change.
2191 # Potentially run all selftest-<LANG>. The various <LANG>/Make-lang.in can
2192 # require the selftests to be run by defining their selftest-<LANG> as
2193 # s-selftest-<LANG>. Otherwise, they should define it as empty.
2195 SELFTEST_TARGETS
= @selftest_languages@
2196 selftest
: $(SELFTEST_TARGETS
)
2198 # Recompile all the language-independent object files.
2199 # This is used only if the user explicitly asks for it.
2200 compilations
: $(BACKEND
)
2202 # This archive is strictly for the host.
2203 libbackend.a
: $(OBJS
)
2204 -rm -rf libbackend.a
2205 @
# Build libbackend.a as a thin archive if possible, as doing so
2206 @
# significantly reduces build times.
2207 ifeq ($(USE_THIN_ARCHIVES
),yes
)
2208 $(AR
) $(AR_FLAGS
)T libbackend.a
$(OBJS
)
2210 $(AR
) $(AR_FLAGS
) libbackend.a
$(OBJS
)
2211 -$(RANLIB
) $(RANLIB_FLAGS
) libbackend.a
2214 libcommon-target.a
: $(OBJS-libcommon-target
)
2215 -rm -rf libcommon-target.a
2216 $(AR
) $(AR_FLAGS
) libcommon-target.a
$(OBJS-libcommon-target
)
2217 -$(RANLIB
) $(RANLIB_FLAGS
) libcommon-target.a
2219 libcommon.a
: $(OBJS-libcommon
)
2221 $(AR
) $(AR_FLAGS
) libcommon.a
$(OBJS-libcommon
)
2222 -$(RANLIB
) $(RANLIB_FLAGS
) libcommon.a
2224 # We call this executable `xgcc' rather than `gcc'
2225 # to avoid confusion if the current directory is in the path
2226 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
2227 xgcc
$(exeext
): $(GCC_OBJS
) c
/gccspec.o libcommon-target.a
$(LIBDEPS
) \
2229 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) -o
$@
$(GCC_OBJS
) \
2230 c
/gccspec.o
$(EXTRA_GCC_OBJS
) libcommon-target.a \
2231 $(EXTRA_GCC_LIBS
) $(LIBS
)
2233 # cpp is to cpp0 as e.g. g++ is to cc1plus: Just another driver.
2234 # It is part of c-family because the handled extensions are hard-coded
2235 # and only contain c-family extensions (see known_suffixes).
2236 cpp$(exeext
): $(GCC_OBJS
) c-family
/cppspec.o libcommon-target.a
$(LIBDEPS
) \
2238 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) -o
$@
$(GCC_OBJS
) \
2239 c-family
/cppspec.o
$(EXTRA_GCC_OBJS
) libcommon-target.a \
2240 $(EXTRA_GCC_LIBS
) $(LIBS
)
2242 # Dump a specs file to make -B./ read these specs over installed ones.
2243 $(SPECS
): xgcc
$(exeext
)
2244 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
2245 mv tmp-specs
$(SPECS
)
2247 # We do want to create an executable named `xgcc', so we can use it to
2248 # compile libgcc2.a.
2249 # Also create gcc-cross, so that install-common will install properly.
2250 gcc-cross
$(exeext
): xgcc
$(exeext
)
2251 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
2254 echo
"$(LINKER) $(ALL_LINKERFLAGS) $(LDFLAGS)" > checksum-options.tmp \
2255 && $(srcdir)/..
/move-if-change checksum-options.tmp checksum-options
2260 libgcc-support
: libgcc.mvars stmp-int-hdrs
$(TCONFIG_H
) \
2261 $(MACHMODE_H
) version.h
2263 libgcc.mvars
: config.status Makefile specs xgcc
$(exeext
)
2264 : > tmp-libgcc.mvars
2265 echo GCC_CFLAGS
= '$(GCC_CFLAGS)' >> tmp-libgcc.mvars
2266 echo INHIBIT_LIBC_CFLAGS
= '$(INHIBIT_LIBC_CFLAGS)' >> tmp-libgcc.mvars
2267 echo TARGET_SYSTEM_ROOT
= '$(TARGET_SYSTEM_ROOT)' >> tmp-libgcc.mvars
2268 if
test @enable_default_pie@
= yes
; then \
2269 NO_PIE_CFLAGS
="-fno-PIE"; \
2273 echo NO_PIE_CFLAGS
= "$$NO_PIE_CFLAGS" >> tmp-libgcc.mvars
2275 mv tmp-libgcc.mvars libgcc.mvars
2277 # Use the genmultilib shell script to generate the information the gcc
2278 # driver program needs to select the library directory based on the
2280 multilib.h
: s-mlib
; @true
2281 s-mlib
: $(srcdir)/genmultilib Makefile
2282 if
test @enable_multilib@
= yes \
2283 ||
test -n
"$(MULTILIB_OSDIRNAMES)"; then \
2284 $(SHELL
) $(srcdir)/genmultilib \
2285 "$(MULTILIB_OPTIONS)" \
2286 "$(MULTILIB_DIRNAMES)" \
2287 "$(MULTILIB_MATCHES)" \
2288 "$(MULTILIB_EXCEPTIONS)" \
2289 "$(MULTILIB_EXTRA_OPTS)" \
2290 "$(MULTILIB_EXCLUSIONS)" \
2291 "$(MULTILIB_OSDIRNAMES)" \
2292 "$(MULTILIB_REQUIRED)" \
2293 "$(if $(MULTILIB_OSDIRNAMES),,$(MULTIARCH_DIRNAME))" \
2294 "$(MULTILIB_REUSE)" \
2295 "@enable_multilib@" \
2298 $(SHELL
) $(srcdir)/genmultilib
'' '' '' '' '' '' '' '' \
2299 "$(MULTIARCH_DIRNAME)" '' no \
2302 $(SHELL
) $(srcdir)/..
/move-if-change tmp-mlib.h multilib.h
2305 # Compiling object files from source files.
2307 # Note that dependencies on obstack.h are not written
2308 # because that file is not part of GCC.
2310 srcextra
: gcc.srcextra lang.srcextra
2312 gcc.srcextra
: gengtype-lex.
cc
2315 AR_OBJS
= file-find.o
2316 AR_LIBS
= @COLLECT2_LIBS@
2318 gcc-ar
$(exeext
): gcc-ar.o
$(AR_OBJS
) $(LIBDEPS
)
2319 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) gcc-ar.o
-o
$@ \
2320 $(AR_OBJS
) $(LIBS
) $(AR_LIBS
)
2322 gcc-nm
$(exeext
): gcc-nm.o
$(AR_OBJS
) $(LIBDEPS
)
2323 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) gcc-nm.o
-o
$@ \
2324 $(AR_OBJS
) $(LIBS
) $(AR_LIBS
)
2326 gcc-ranlib
$(exeext
): gcc-ranlib.o
$(AR_OBJS
) $(LIBDEPS
)
2327 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) gcc-ranlib.o
-o
$@ \
2328 $(AR_OBJS
) $(LIBS
) $(AR_LIBS
)
2330 CFLAGS-gcc-ar.o
+= $(DRIVER_DEFINES
) \
2331 -DTARGET_MACHINE
=\"$(target_noncanonical
)\" \
2332 @TARGET_SYSTEM_ROOT_DEFINE@
-DPERSONALITY
=\"ar\"
2334 CFLAGS-gcc-ranlib.o
+= $(DRIVER_DEFINES
) \
2335 -DTARGET_MACHINE
=\"$(target_noncanonical
)\" \
2336 @TARGET_SYSTEM_ROOT_DEFINE@
-DPERSONALITY
=\"ranlib
\"
2338 CFLAGS-gcc-nm.o
+= $(DRIVER_DEFINES
) \
2339 -DTARGET_MACHINE
=\"$(target_noncanonical
)\" \
2340 @TARGET_SYSTEM_ROOT_DEFINE@
-DPERSONALITY
=\"nm
\"
2342 # ??? the implicit rules dont trigger if the source file has a different name
2344 gcc-ranlib.
cc: gcc-ar.
cc
2347 gcc-nm.
cc: gcc-ar.
cc
2350 COLLECT2_OBJS
= collect2.o collect2-aix.o vec.o ggc-none.o \
2351 collect-utils.o file-find.o hash-table.o selftest.o
2352 COLLECT2_LIBS
= @COLLECT2_LIBS@
2353 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
2354 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
2355 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) -o T
$@ \
2356 $(COLLECT2_OBJS
) $(LIBS
) $(COLLECT2_LIBS
)
2359 CFLAGS-collect2.o
+= -DTARGET_MACHINE
=\"$(target_noncanonical
)\" \
2360 @TARGET_SYSTEM_ROOT_DEFINE@
2362 LTO_WRAPPER_OBJS
= lto-wrapper.o collect-utils.o ggc-none.o
2363 lto-wrapper
$(exeext
): $(LTO_WRAPPER_OBJS
) libcommon-target.a
$(LIBDEPS
)
2364 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) -o T
$@ \
2365 $(LTO_WRAPPER_OBJS
) libcommon-target.a
$(LIBS
)
2368 # Files used by all variants of C or by the stand-alone pre-processor.
2370 CFLAGS-c-family
/c-opts.o
+= @TARGET_SYSTEM_ROOT_DEFINE@
2372 CFLAGS-c-family
/c-pch.o
+= -DHOST_MACHINE
=\"$(host
)\" \
2373 -DTARGET_MACHINE
=\"$(target
)\"
2375 default-c.o
: config
/default-c.
cc
2379 # Files used by all variants of C and some other languages.
2381 CFLAGS-prefix.o
+= -DPREFIX
=\"$(prefix)\" -DBASEVER
=$(BASEVER_s
)
2382 prefix.o
: $(BASEVER
)
2384 # Files used by the D language front end.
2386 default-d.o
: config
/default-d.
cc
2390 # Files used by the Rust language front end.
2392 default-rust.o
: config
/default-rust.
cc
2396 # Language-independent files.
2399 -DSTANDARD_STARTFILE_PREFIX
=\"$(unlibsubdir
)/\" \
2400 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc
/\" \
2401 -DSTANDARD_LIBEXEC_PREFIX
=\"$(libexecdir
)/gcc
/\" \
2402 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
2403 -DDEFAULT_REAL_TARGET_MACHINE
=\"$(real_target_noncanonical
)\" \
2404 -DDEFAULT_TARGET_MACHINE
=\"$(target_noncanonical
)\" \
2405 -DSTANDARD_BINDIR_PREFIX
=\"$(bindir)/\" \
2406 -DTOOLDIR_BASE_PREFIX
=\"$(libsubdir_to_prefix
)$(prefix_to_exec_prefix
)\" \
2407 -DACCEL_DIR_SUFFIX
=\"$(accel_dir_suffix
)\" \
2408 @TARGET_SYSTEM_ROOT_DEFINE@ \
2409 $(VALGRIND_DRIVER_DEFINES
) \
2410 $(if
$(SHLIB
),$(if
$(filter yes
,@enable_shared@
),-DENABLE_SHARED_LIBGCC
)) \
2411 -DCONFIGURE_SPECS
="\"@CONFIGURE_SPECS@\"" \
2412 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2413 -DNATIVE_SYSTEM_HEADER_DIR
=\"$(NATIVE_SYSTEM_HEADER_DIR
)\"
2415 CFLAGS-gcc.o
+= $(DRIVER_DEFINES
) -DBASEVER
=$(BASEVER_s
)
2418 specs.h
: s-specs
; @true
2420 lsf
="$(lang_specs_files)"; for f in
$$lsf; do \
2421 echo
"#include \"$$f\""; \
2422 done | sed
's|$(srcdir)/||' > tmp-specs.h
2423 $(SHELL
) $(srcdir)/..
/move-if-change tmp-specs.h specs.h
2426 optionlist
: s-options
; @true
2427 s-options
: $(ALL_OPT_FILES
) Makefile
$(srcdir)/opt-gather.awk
2428 LC_ALL
=C
; export LC_ALL
; \
2429 $(AWK
) -f
$(srcdir)/opt-gather.awk
$(ALL_OPT_FILES
) > tmp-optionlist
2430 $(SHELL
) $(srcdir)/..
/move-if-change tmp-optionlist optionlist
2433 options.
cc: optionlist
$(srcdir)/opt-functions.awk
$(srcdir)/opt-read.awk \
2434 $(srcdir)/optc-gen.awk
2435 $(AWK
) -f
$(srcdir)/opt-functions.awk
-f
$(srcdir)/opt-read.awk \
2436 -f
$(srcdir)/optc-gen.awk \
2437 -v header_name
="config.h system.h coretypes.h options.h tm.h" < $< > $@
2439 options-save.
cc: optionlist
$(srcdir)/opt-functions.awk
$(srcdir)/opt-read.awk \
2440 $(srcdir)/optc-save-gen.awk
2441 $(AWK
) -f
$(srcdir)/opt-functions.awk
-f
$(srcdir)/opt-read.awk \
2442 -f
$(srcdir)/optc-save-gen.awk \
2443 -v header_name
="config.h system.h coretypes.h tm.h" < $< > $@
2445 options.h
: s-options-h
; @true
2446 s-options-h
: optionlist
$(srcdir)/opt-functions.awk
$(srcdir)/opt-read.awk \
2447 $(srcdir)/opth-gen.awk
2448 $(AWK
) -f
$(srcdir)/opt-functions.awk
-f
$(srcdir)/opt-read.awk \
2449 -f
$(srcdir)/opth-gen.awk \
2450 < $< > tmp-options.h
2451 $(SHELL
) $(srcdir)/..
/move-if-change tmp-options.h options.h
2454 dumpvers
: dumpvers.
cc
2456 # lto-compress.o needs $(ZLIBINC) added to the include flags.
2457 CFLAGS-lto-compress.o
+= $(ZLIBINC
) $(ZSTD_INC
)
2459 CFLAGS-lto-streamer-in.o
+= -DTARGET_MACHINE
=\"$(target_noncanonical
)\"
2461 bversion.h
: s-bversion
; @true
2462 s-bversion
: BASE-VER
2463 echo
"#define BUILDING_GCC_MAJOR `echo $(BASEVER_c) | sed -e 's/^\([0-9]*\).*$$/\1/'`" > bversion.h
2464 echo
"#define BUILDING_GCC_MINOR `echo $(BASEVER_c) | sed -e 's/^[0-9]*\.\([0-9]*\).*$$/\1/'`" >> bversion.h
2465 echo
"#define BUILDING_GCC_PATCHLEVEL `echo $(BASEVER_c) | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$$/\1/'`" >> bversion.h
2466 echo
"#define BUILDING_GCC_VERSION (BUILDING_GCC_MAJOR * 1000 + BUILDING_GCC_MINOR)" >> bversion.h
2469 CFLAGS-toplev.o
+= -DTARGET_NAME
=\"$(target_noncanonical
)\"
2470 CFLAGS-tree-diagnostic-client-data-hooks.o
+= -DTARGET_NAME
=\"$(target_noncanonical
)\"
2471 CFLAGS-optinfo-emit-json.o
+= -DTARGET_NAME
=\"$(target_noncanonical
)\" $(ZLIBINC
)
2472 CFLAGS-analyzer
/engine.o
+= $(ZLIBINC
)
2474 pass-instances.def
: $(srcdir)/passes.def
$(PASSES_EXTRA
) \
2475 $(srcdir)/gen-pass-instances.awk
2476 $(AWK
) -f
$(srcdir)/gen-pass-instances.awk \
2477 $(srcdir)/passes.def
$(PASSES_EXTRA
) > pass-instances.def
2479 $(out_object_file
): $(out_file
)
2483 $(common_out_object_file
): $(common_out_file
)
2487 # Generate header and source files from the machine description,
2490 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h insn-constants.h \
2491 insn-emit.
cc insn-recog.
cc insn-extract.
cc insn-output.
cc insn-peep.
cc \
2492 insn-attr.h insn-attr-common.h insn-attrtab.
cc insn-dfatab.
cc \
2493 insn-latencytab.
cc insn-preds.
cc $(GIMPLE_MATCH_PD_SEQ_SRC
) \
2494 $(GENERIC_MATCH_PD_SEQ_SRC
) gimple-match-auto.h generic-match-auto.h \
2497 # Dependencies for the md file. The first time through, we just assume
2498 # the md file itself and the generated dependency file (in order to get
2499 # it built). The second time through we have the dependency file.
2501 MD_DEPS
= s-mddeps
$(md_file
) $(MD_INCLUDES
)
2503 s-mddeps
: $(md_file
) $(MD_INCLUDES
) build
/genmddeps
$(build_exeext
)
2504 $(RUN_GEN
) build
/genmddeps
$(build_exeext
) $(md_file
) > tmp-mddeps
2505 $(SHELL
) $(srcdir)/..
/move-if-change tmp-mddeps mddeps.mk
2508 # For each of the files generated by running a generator program over
2509 # the machine description, the following static pattern rules run the
2510 # generator program only if the machine description has changed,
2511 # but touch the target file only when its contents actually change.
2512 # The "; @true" construct forces Make to recheck the timestamp on
2515 simple_rtl_generated_h
= insn-attr.h insn-attr-common.h insn-codes.h \
2516 insn-config.h insn-flags.h insn-target-def.h
2518 simple_rtl_generated_c
= insn-automata.
cc insn-emit.
cc \
2519 insn-extract.
cc insn-output.
cc \
2520 insn-peep.
cc insn-recog.
cc
2522 simple_generated_h
= $(simple_rtl_generated_h
) insn-constants.h
2524 simple_generated_c
= $(simple_rtl_generated_c
) insn-enums.
cc
2526 $(simple_generated_h
:insn-
%.h
=s-
%) \
2527 $(simple_generated_c
:insn-
%.
cc=s-
%): s-
%: $(MD_DEPS
)
2529 $(simple_rtl_generated_h
:insn-
%.h
=s-
%) \
2530 $(simple_rtl_generated_c
:insn-
%.
cc=s-
%): s-
%: insn-conditions.md
2532 $(simple_generated_h
): insn-
%.h
: s-
%; @true
2534 $(simple_generated_h
:insn-
%.h
=s-
%): s-
%: build
/gen
%$(build_exeext
)
2535 $(RUN_GEN
) build
/gen
$*$(build_exeext
) $(md_file
) \
2536 $(filter insn-conditions.md
,$^
) > tmp-
$*.h
2537 $(SHELL
) $(srcdir)/..
/move-if-change tmp-
$*.h insn-
$*.h
2540 $(simple_generated_c
): insn-
%.
cc: s-
%; @true
2541 $(simple_generated_c
:insn-
%.
cc=s-
%): s-
%: build
/gen
%$(build_exeext
)
2542 $(RUN_GEN
) build
/gen
$*$(build_exeext
) $(md_file
) \
2543 $(filter insn-conditions.md
,$^
) > tmp-
$*.
cc
2544 $(SHELL
) $(srcdir)/..
/move-if-change tmp-
$*.
cc insn-
$*.
cc
2547 # gencheck doesn't read the machine description, and the file produced
2548 # doesn't use the insn-* convention.
2549 tree-check.h
: s-check
; @true
2550 s-check
: build
/gencheck
$(build_exeext
)
2551 $(RUN_GEN
) build
/gencheck
$(build_exeext
) > tmp-check.h
2552 $(SHELL
) $(srcdir)/..
/move-if-change tmp-check.h tree-check.h
2555 # genattrtab produces three files: tmp-{attrtab.cc,dfatab.cc,latencytab.cc}
2556 insn-attrtab.
cc insn-dfatab.
cc insn-latencytab.
cc: s-attrtab
; @true
2557 s-attrtab
: $(MD_DEPS
) build
/genattrtab
$(build_exeext
) \
2559 $(RUN_GEN
) build
/genattrtab
$(build_exeext
) $(md_file
) insn-conditions.md \
2560 -Atmp-attrtab.
cc -Dtmp-dfatab.
cc -Ltmp-latencytab.
cc
2561 $(SHELL
) $(srcdir)/..
/move-if-change tmp-attrtab.
cc insn-attrtab.
cc
2562 $(SHELL
) $(srcdir)/..
/move-if-change tmp-dfatab.
cc insn-dfatab.
cc
2563 $(SHELL
) $(srcdir)/..
/move-if-change tmp-latencytab.
cc insn-latencytab.
cc
2566 # genopinit produces two files.
2567 insn-opinit.
cc insn-opinit.h
: s-opinit
; @true
2568 s-opinit
: $(MD_DEPS
) build
/genopinit
$(build_exeext
) insn-conditions.md
2569 $(RUN_GEN
) build
/genopinit
$(build_exeext
) $(md_file
) \
2570 insn-conditions.md
-htmp-opinit.h
-ctmp-opinit.
cc
2571 $(SHELL
) $(srcdir)/..
/move-if-change tmp-opinit.h insn-opinit.h
2572 $(SHELL
) $(srcdir)/..
/move-if-change tmp-opinit.
cc insn-opinit.
cc
2575 # gencondmd doesn't use the standard naming convention.
2576 build
/gencondmd.
cc: s-conditions
; @true
2577 s-conditions
: $(MD_DEPS
) build
/genconditions
$(build_exeext
)
2578 $(RUN_GEN
) build
/genconditions
$(build_exeext
) $(md_file
) > tmp-condmd.
cc
2579 $(SHELL
) $(srcdir)/..
/move-if-change tmp-condmd.
cc build
/gencondmd.
cc
2580 $(STAMP
) s-conditions
2582 insn-conditions.md
: s-condmd
; @true
2583 s-condmd
: build
/gencondmd
$(build_exeext
)
2584 $(RUN_GEN
) build
/gencondmd
$(build_exeext
) > tmp-cond.md
2585 $(SHELL
) $(srcdir)/..
/move-if-change tmp-cond.md insn-conditions.md
2589 # These files are generated by running the same generator more than
2590 # once with different options, so they have custom rules. The
2591 # stampfile idiom is the same.
2592 genrtl.h
: s-genrtl-h
; @true
2594 s-genrtl-h
: build
/gengenrtl
$(build_exeext
)
2595 $(RUN_GEN
) build
/gengenrtl
$(build_exeext
) > tmp-genrtl.h
2596 $(SHELL
) $(srcdir)/..
/move-if-change tmp-genrtl.h genrtl.h
2599 insn-modes.
cc: s-modes
; @true
2600 insn-modes.h
: s-modes-h
; @true
2601 insn-modes-inline.h
: s-modes-inline-h
; @true
2602 min-insn-modes.
cc: s-modes-m
; @true
2604 s-modes
: build
/genmodes
$(build_exeext
)
2605 $(RUN_GEN
) build
/genmodes
$(build_exeext
) > tmp-modes.
cc
2606 $(SHELL
) $(srcdir)/..
/move-if-change tmp-modes.
cc insn-modes.
cc
2609 s-modes-h
: build
/genmodes
$(build_exeext
)
2610 $(RUN_GEN
) build
/genmodes
$(build_exeext
) -h
> tmp-modes.h
2611 $(SHELL
) $(srcdir)/..
/move-if-change tmp-modes.h insn-modes.h
2614 s-modes-inline-h
: build
/genmodes
$(build_exeext
)
2615 $(RUN_GEN
) build
/genmodes
$(build_exeext
) -i
> tmp-modes-inline.h
2616 $(SHELL
) $(srcdir)/..
/move-if-change tmp-modes-inline.h \
2618 $(STAMP
) s-modes-inline-h
2620 s-modes-m
: build
/genmodes
$(build_exeext
)
2621 $(RUN_GEN
) build
/genmodes
$(build_exeext
) -m
> tmp-min-modes.
cc
2622 $(SHELL
) $(srcdir)/..
/move-if-change tmp-min-modes.
cc min-insn-modes.
cc
2625 insn-preds.
cc: s-preds
; @true
2626 tm-preds.h
: s-preds-h
; @true
2627 tm-constrs.h
: s-constrs-h
; @true
2630 mddump
: $(BUILD_RTL
) $(MD_DEPS
) build
/genmddump
$(build_exeext
)
2631 $(RUN_GEN
) build
/genmddump
$(build_exeext
) $(md_file
) > tmp-mddump.md
2633 s-preds
: $(MD_DEPS
) build
/genpreds
$(build_exeext
)
2634 $(RUN_GEN
) build
/genpreds
$(build_exeext
) $(md_file
) > tmp-preds.
cc
2635 $(SHELL
) $(srcdir)/..
/move-if-change tmp-preds.
cc insn-preds.
cc
2638 s-preds-h
: $(MD_DEPS
) build
/genpreds
$(build_exeext
)
2639 $(RUN_GEN
) build
/genpreds
$(build_exeext
) -h
$(md_file
) > tmp-preds.h
2640 $(SHELL
) $(srcdir)/..
/move-if-change tmp-preds.h tm-preds.h
2643 s-constrs-h
: $(MD_DEPS
) build
/genpreds
$(build_exeext
)
2644 $(RUN_GEN
) build
/genpreds
$(build_exeext
) -c
$(md_file
) > tmp-constrs.h
2645 $(SHELL
) $(srcdir)/..
/move-if-change tmp-constrs.h tm-constrs.h
2646 $(STAMP
) s-constrs-h
2648 s-case-cfn-macros
: build
/gencfn-macros
$(build_exeext
)
2649 $(RUN_GEN
) build
/gencfn-macros
$(build_exeext
) -c \
2650 > tmp-case-cfn-macros.h
2651 $(SHELL
) $(srcdir)/..
/move-if-change tmp-case-cfn-macros.h \
2653 $(STAMP
) s-case-cfn-macros
2654 case-cfn-macros.h
: s-case-cfn-macros
; @true
2656 s-cfn-operators
: build
/gencfn-macros
$(build_exeext
)
2657 $(RUN_GEN
) build
/gencfn-macros
$(build_exeext
) -o \
2658 > tmp-cfn-operators.pd
2659 $(SHELL
) $(srcdir)/..
/move-if-change tmp-cfn-operators.pd \
2661 $(STAMP
) s-cfn-operators
2662 cfn-operators.pd
: s-cfn-operators
; @true
2664 target-hooks-def.h
: s-target-hooks-def-h
; @true
2665 # make sure that when we build info files, the used tm.texi is up to date.
2666 $(srcdir)/doc
/tm.texi
: s-tm-texi
; @true
2668 s-target-hooks-def-h
: build
/genhooks
$(build_exeext
)
2669 $(RUN_GEN
) build
/genhooks
$(build_exeext
) "Target Hook" \
2670 > tmp-target-hooks-def.h
2671 $(SHELL
) $(srcdir)/..
/move-if-change tmp-target-hooks-def.h \
2673 $(STAMP
) s-target-hooks-def-h
2675 c-family
/c-target-hooks-def.h
: s-c-target-hooks-def-h
; @true
2677 s-c-target-hooks-def-h
: build
/genhooks
$(build_exeext
)
2678 $(RUN_GEN
) build
/genhooks
$(build_exeext
) "C Target Hook" \
2679 > tmp-c-target-hooks-def.h
2680 $(SHELL
) $(srcdir)/..
/move-if-change tmp-c-target-hooks-def.h \
2681 c-family
/c-target-hooks-def.h
2682 $(STAMP
) s-c-target-hooks-def-h
2684 common
/common-target-hooks-def.h
: s-common-target-hooks-def-h
; @true
2686 s-common-target-hooks-def-h
: build
/genhooks
$(build_exeext
)
2687 $(RUN_GEN
) build
/genhooks
$(build_exeext
) "Common Target Hook" \
2688 > tmp-common-target-hooks-def.h
2689 $(SHELL
) $(srcdir)/..
/move-if-change tmp-common-target-hooks-def.h \
2690 common
/common-target-hooks-def.h
2691 $(STAMP
) s-common-target-hooks-def-h
2693 d
/d-target-hooks-def.h
: s-d-target-hooks-def-h
; @true
2695 s-d-target-hooks-def-h
: build
/genhooks
$(build_exeext
)
2696 $(RUN_GEN
) build
/genhooks
$(build_exeext
) "D Target Hook" \
2697 > tmp-d-target-hooks-def.h
2698 $(SHELL
) $(srcdir)/..
/move-if-change tmp-d-target-hooks-def.h \
2699 d
/d-target-hooks-def.h
2700 $(STAMP
) s-d-target-hooks-def-h
2702 rust
/rust-target-hooks-def.h
: s-rust-target-hooks-def-h
; @true
2704 s-rust-target-hooks-def-h
: build
/genhooks
$(build_exeext
)
2705 $(RUN_GEN
) build
/genhooks
$(build_exeext
) "Rust Target Hook" \
2706 > tmp-rust-target-hooks-def.h
2707 $(SHELL
) $(srcdir)/..
/move-if-change tmp-rust-target-hooks-def.h \
2708 rust
/rust-target-hooks-def.h
2709 $(STAMP
) s-rust-target-hooks-def-h
2711 # check if someone mistakenly only changed tm.texi.
2712 # We use a different pathname here to avoid a circular dependency.
2713 s-tm-texi
: $(srcdir)/doc
/..
/doc
/tm.texi
2715 # The tm.texi we want to compare against / check into svn should have
2716 # unix-style line endings. To make this work on MinGW, remove \r.
2717 # \r is not portable to Solaris tr, therefore we have a special
2718 # case for ASCII. We use \r for other encodings like EBCDIC.
2719 s-tm-texi
: build
/genhooks
$(build_exeext
) $(srcdir)/doc
/tm.texi.in
2720 $(RUN_GEN
) build
/genhooks
$(build_exeext
) -d \
2721 $(srcdir)/doc
/tm.texi.in
> tmp-tm.texi
2722 case
`echo X|tr X '\101'` in \
2723 A
) tr
-d
'\015' < tmp-tm.texi
> tmp2-tm.texi
;; \
2724 *) tr
-d
'\r' < tmp-tm.texi
> tmp2-tm.texi
;; \
2726 mv tmp2-tm.texi tmp-tm.texi
2727 $(SHELL
) $(srcdir)/..
/move-if-change tmp-tm.texi tm.texi
2728 @if cmp
-s
$(srcdir)/doc
/tm.texi tm.texi
; then \
2730 elif
test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/doc
/tm.texi.in \
2731 && ( test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/target.def \
2732 ||
test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/c-family
/c-target.def \
2733 ||
test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/common
/common-target.def \
2734 ||
test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/d
/d-target.def \
2735 ||
test $(srcdir)/doc
/tm.texi
-nt
$(srcdir)/rust
/rust-target.def \
2738 echo You should edit
$(srcdir)/doc
/tm.texi.in rather than
$(srcdir)/doc
/tm.texi .
>&2 ; \
2742 echo Verify that you have permission to grant a GFDL license for
all >&2 ; \
2743 echo new text in
$(objdir
)/tm.texi
, then copy it to
$(srcdir)/doc
/tm.texi.
>&2 ; \
2747 $(GIMPLE_MATCH_PD_SEQ_SRC
): s-gimple-match gimple-match-head.
cc; @true
2748 gimple-match-auto.h
: s-gimple-match
; @true
2749 $(GENERIC_MATCH_PD_SEQ_SRC
): s-generic-match generic-match-head.
cc; @true
2750 generic-match-auto.h
: s-generic-match
; @true
2752 s-gimple-match
: build
/genmatch
$(build_exeext
) \
2753 $(srcdir)/match.pd cfn-operators.pd
2754 $(RUN_GEN
) build
/genmatch
$(build_exeext
) --gimple \
2755 --header
=tmp-gimple-match-auto.h
--include=gimple-match-auto.h \
2756 $(srcdir)/match.pd
$(patsubst %, tmp-
%, $(GIMPLE_MATCH_PD_SEQ_SRC
))
2757 $(foreach id
, $(MATCH_SPLITS_SEQ
), \
2758 $(SHELL
) $(srcdir)/..
/move-if-change tmp-gimple-match-
$(id
).
cc \
2759 gimple-match-
$(id
).
cc;)
2760 $(SHELL
) $(srcdir)/..
/move-if-change tmp-gimple-match-auto.h \
2762 $(STAMP
) s-gimple-match
2764 s-generic-match
: build
/genmatch
$(build_exeext
) \
2765 $(srcdir)/match.pd cfn-operators.pd
2766 $(RUN_GEN
) build
/genmatch
$(build_exeext
) --generic \
2767 --header
=tmp-generic-match-auto.h
--include=generic-match-auto.h \
2768 $(srcdir)/match.pd
$(patsubst %, tmp-
%, $(GENERIC_MATCH_PD_SEQ_SRC
))
2769 $(foreach id
, $(MATCH_SPLITS_SEQ
), \
2770 $(SHELL
) $(srcdir)/..
/move-if-change tmp-generic-match-
$(id
).
cc \
2771 generic-match-
$(id
).
cc;)
2772 $(SHELL
) $(srcdir)/..
/move-if-change tmp-generic-match-auto.h \
2773 generic-match-auto.h
2774 $(STAMP
) s-generic-match
2776 GTFILES
= $(CPPLIB_H
) $(srcdir)/input.h
$(srcdir)/coretypes.h \
2777 $(host_xm_file_list
) \
2778 $(OPTIONS_H_EXTRA
) \
2779 $(tm_file_list
) $(HASHTAB_H
) $(SPLAY_TREE_H
) $(srcdir)/bitmap.h \
2780 $(srcdir)/wide-int.h
$(srcdir)/alias.h \
2781 $(srcdir)/coverage.
cc $(srcdir)/rtl.h \
2782 $(srcdir)/optabs.h
$(srcdir)/tree.h
$(srcdir)/tree-core.h \
2783 $(srcdir)/libfuncs.h
$(SYMTAB_H
) \
2784 $(srcdir)/real.h
$(srcdir)/function.h
$(srcdir)/insn-addr.h
$(srcdir)/hwint.h \
2785 $(srcdir)/fixed-value.h \
2786 $(srcdir)/function-abi.h \
2787 $(srcdir)/output.h
$(srcdir)/cfgloop.h
$(srcdir)/cfg.h
$(srcdir)/profile-count.h \
2788 $(srcdir)/cselib.h
$(srcdir)/basic-block.h
$(srcdir)/ipa-ref.h
$(srcdir)/cgraph.h \
2789 $(srcdir)/symtab-thunks.h
$(srcdir)/symtab-thunks.
cc \
2790 $(srcdir)/symtab-clones.h \
2791 $(srcdir)/reload.h
$(srcdir)/caller-save.
cc $(srcdir)/symtab.
cc \
2792 $(srcdir)/alias.
cc $(srcdir)/bitmap.
cc $(srcdir)/cselib.
cc $(srcdir)/cgraph.
cc \
2793 $(srcdir)/ipa-prop.
cc $(srcdir)/ipa-cp.
cc $(srcdir)/ipa-utils.h \
2794 $(srcdir)/ipa-param-manipulation.h
$(srcdir)/ipa-sra.
cc \
2795 $(srcdir)/ipa-modref.h
$(srcdir)/ipa-modref.
cc \
2796 $(srcdir)/ipa-modref-tree.h \
2797 $(srcdir)/signop.h \
2798 $(srcdir)/diagnostic-spec.h
$(srcdir)/diagnostic-spec.
cc \
2799 $(srcdir)/dwarf2out.h \
2800 $(srcdir)/dwarf2asm.
cc \
2801 $(srcdir)/dwarf2cfi.
cc \
2802 $(srcdir)/dwarf2ctf.
cc \
2803 $(srcdir)/dwarf2out.
cc \
2805 $(srcdir)/ctfout.
cc \
2806 $(srcdir)/btfout.
cc \
2807 $(srcdir)/tree-vect-generic.
cc \
2808 $(srcdir)/gimple-isel.
cc \
2809 $(srcdir)/dojump.
cc $(srcdir)/emit-rtl.h \
2810 $(srcdir)/emit-rtl.
cc $(srcdir)/except.h
$(srcdir)/explow.
cc $(srcdir)/expr.
cc \
2812 $(srcdir)/function.
cc $(srcdir)/except.
cc \
2813 $(srcdir)/ggc-tests.
cc \
2814 $(srcdir)/gcse.
cc $(srcdir)/godump.
cc \
2815 $(srcdir)/lists.
cc $(srcdir)/optabs-libfuncs.
cc \
2816 $(srcdir)/profile.
cc $(srcdir)/mcf.
cc \
2817 $(srcdir)/reg-stack.
cc $(srcdir)/cfgrtl.
cc \
2818 $(srcdir)/stor-layout.
cc \
2819 $(srcdir)/stringpool.
cc $(srcdir)/tree.
cc $(srcdir)/varasm.
cc \
2820 $(srcdir)/gimple.h \
2821 $(srcdir)/gimple-ssa.h \
2822 $(srcdir)/tree-ssanames.
cc $(srcdir)/tree-eh.
cc $(srcdir)/tree-ssa-address.
cc \
2823 $(srcdir)/tree-cfg.
cc $(srcdir)/tree-ssa-loop-ivopts.
cc \
2824 $(srcdir)/tree-dfa.
cc \
2825 $(srcdir)/tree-iterator.
cc $(srcdir)/gimple-expr.
cc \
2826 $(srcdir)/tree-chrec.h \
2827 $(srcdir)/tree-scalar-evolution.
cc \
2828 $(srcdir)/tree-ssa-operands.h \
2829 $(srcdir)/tree-profile.
cc $(srcdir)/tree-nested.
cc \
2830 $(srcdir)/omp-offload.h \
2831 $(srcdir)/omp-general.
cc \
2832 $(srcdir)/omp-low.
cc \
2833 $(srcdir)/targhooks.
cc $(out_file
) $(srcdir)/passes.
cc \
2834 $(srcdir)/cgraphclones.
cc \
2835 $(srcdir)/tree-phinodes.
cc \
2836 $(srcdir)/tree-ssa-alias.h \
2837 $(srcdir)/tree-ssanames.h \
2838 $(srcdir)/tree-vrp.h \
2839 $(srcdir)/value-range.h \
2840 $(srcdir)/value-range-storage.h \
2841 $(srcdir)/ipa-prop.h \
2842 $(srcdir)/trans-mem.
cc \
2843 $(srcdir)/lto-streamer.h \
2844 $(srcdir)/target-globals.h \
2845 $(srcdir)/ipa-predicate.h \
2846 $(srcdir)/ipa-fnsummary.h \
2847 $(srcdir)/vtable-verify.
cc \
2849 $(srcdir)/ubsan.
cc \
2851 $(srcdir)/sanopt.
cc \
2852 $(srcdir)/sancov.
cc \
2853 $(srcdir)/ipa-devirt.
cc \
2854 $(srcdir)/internal-fn.h \
2855 $(srcdir)/calls.
cc \
2856 $(srcdir)/omp-general.h \
2857 $(srcdir)/analyzer
/analyzer-language.
cc \
2860 # Compute the list of GT header files from the corresponding C sources,
2861 # possibly nested within config or language subdirectories. Match gengtype's
2862 # behavior in this respect: gt-LANG-file.h for "file" anywhere within a LANG
2863 # language subdir, gt-file.h otherwise (no subdir indication for config/
2866 GTFILES_H
= $(subst /,-, \
2867 $(shell echo
$(patsubst $(srcdir)/%,gt-
%, \
2868 $(patsubst %.
cc,%.h
, \
2869 $(filter %.
cc, $(GTFILES
)))) \
2870 | sed
-e
"s|/[^ ]*/|/|g" -e
"s|gt-config/|gt-|g"))
2872 GTFILES_LANG_H
= $(patsubst [%], gtype-
%.h
, $(filter [%], $(GTFILES
)))
2873 ALL_GTFILES_H
:= $(sort $(GTFILES_H
) $(GTFILES_LANG_H
))
2875 # $(GTFILES) may be too long to put on a command line, so we have to
2876 # write it out to a file (taking care not to do that in a way that
2877 # overflows a command line!) and then have gengtype read the file in.
2879 $(ALL_GTFILES_H
) gtype-desc.
cc gtype-desc.h gtype.state
: s-gtype
; @true
2881 ### Common flags to gengtype [e.g. -v or -B backupdir]
2884 gtyp-input.list
: s-gtyp-input
; @true
2885 s-gtyp-input
: Makefile
2886 @
: $(call write_entries_to_file
,$(GTFILES
),tmp-gi.list
)
2887 $(SHELL
) $(srcdir)/..
/move-if-change tmp-gi.list gtyp-input.list
2888 $(STAMP
) s-gtyp-input
2890 s-gtype
: $(EXTRA_GTYPE_DEPS
) build
/gengtype
$(build_exeext
) \
2891 $(filter-out [%], $(GTFILES
)) gtyp-input.list
2892 # First, parse all files and save a state file.
2893 $(RUN_GEN
) build
/gengtype
$(build_exeext
) $(GENGTYPE_FLAGS
) \
2894 -S
$(srcdir) -I gtyp-input.list
-w tmp-gtype.state
2895 # Second, read the state file and generate all files. This ensure that
2896 # gtype.state is correctly read:
2897 $(SHELL
) $(srcdir)/..
/move-if-change tmp-gtype.state gtype.state
2898 $(RUN_GEN
) build
/gengtype
$(build_exeext
) $(GENGTYPE_FLAGS
) \
2902 generated_files
= config.h tm.h
$(TM_P_H
) $(TM_D_H
) $(TM_H
) multilib.h \
2903 $(simple_generated_h
) specs.h \
2904 tree-check.h genrtl.h insn-modes.h insn-modes-inline.h \
2905 tm-preds.h tm-constrs.h \
2906 $(ALL_GTFILES_H
) gtype-desc.
cc gtype-desc.h version.h \
2907 options.h target-hooks-def.h insn-opinit.h \
2908 common
/common-target-hooks-def.h pass-instances.def \
2909 $(GIMPLE_MATCH_PD_SEQ_SRC
) $(GENERIC_MATCH_PD_SEQ_SRC
) \
2910 gimple-match-auto.h generic-match-auto.h \
2911 c-family
/c-target-hooks-def.h d
/d-target-hooks-def.h \
2912 $(TM_RUST_H
) rust
/rust-target-hooks-def.h \
2914 cfn-operators.pd omp-device-properties.h
2917 # How to compile object files to run on the build machine.
2919 build
/%.o
: # dependencies provided by explicit rule later
2920 $(COMPILER_FOR_BUILD
) -c
$(BUILD_COMPILERFLAGS
) $(BUILD_CPPFLAGS
) \
2923 # Header dependencies for the programs that generate source code.
2924 # These are library modules...
2925 build
/errors.o
: errors.
cc $(BCONFIG_H
) $(SYSTEM_H
) errors.h
2926 build
/gensupport.o
: gensupport.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2927 $(CORETYPES_H
) $(GTM_H
) $(RTL_BASE_H
) $(OBSTACK_H
) errors.h \
2928 $(HASHTAB_H
) $(READ_MD_H
) $(GENSUPPORT_H
) $(HASH_TABLE_H
)
2929 build
/ggc-none.o
: ggc-none.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
2931 build
/min-insn-modes.o
: min-insn-modes.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2933 build
/print-rtl.o
: print-rtl.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
2934 $(GTM_H
) $(RTL_BASE_H
)
2935 build
/read-md.o
: read-md.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
2936 $(HASHTAB_H
) errors.h
$(READ_MD_H
)
2937 build
/read-rtl.o
: read-rtl.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
2938 $(GTM_H
) $(RTL_BASE_H
) $(OBSTACK_H
) $(HASHTAB_H
) $(READ_MD_H
) \
2940 build
/rtl.o
: rtl.
cc $(BCONFIG_H
) $(CORETYPES_H
) $(GTM_H
) $(SYSTEM_H
) \
2941 $(RTL_H
) $(GGC_H
) errors.h
2942 build
/vec.o
: vec.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) $(VEC_H
) \
2943 $(GGC_H
) toplev.h
$(DIAGNOSTIC_CORE_H
) $(HASH_TABLE_H
)
2944 build
/hash-table.o
: hash-table.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2945 $(CORETYPES_H
) $(HASH_TABLE_H
) $(GGC_H
) toplev.h
$(DIAGNOSTIC_CORE_H
)
2946 build
/sort.o
: sort.
cc $(BCONFIG_H
) $(SYSTEM_H
)
2947 build
/inchash.o
: inchash.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
2948 $(HASHTAB_H
) inchash.h
2949 build
/gencondmd.o
: build
/gencondmd.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2950 $(CORETYPES_H
) $(GTM_H
) insn-constants.h \
2951 $(filter-out insn-flags.h
, $(RTL_H
) $(TM_P_H
) $(FUNCTION_H
) $(REGS_H
) \
2952 $(RECOG_H
) output.h
$(FLAGS_H
) $(RESOURCE_H
) toplev.h
$(DIAGNOSTIC_CORE_H
) reload.h \
2953 $(EXCEPT_H
) tm-constrs.h
)
2954 # This pulls in tm-pred.h which contains inline functions wrapping up
2955 # predicates from the back-end so those functions must be discarded.
2956 # No big deal since gencondmd.cc is a dummy file for non-GCC compilers.
2957 build
/gencondmd.o
: \
2958 BUILD_CFLAGS
:= $(filter-out -fkeep-inline-functions
, $(BUILD_CFLAGS
))
2960 # ...these are the programs themselves.
2961 build
/genattr.o
: genattr.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
2962 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
2963 build
/genattr-common.o
: genattr-common.
cc $(RTL_BASE_H
) $(BCONFIG_H
) \
2964 $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
2965 build
/genattrtab.o
: genattrtab.
cc $(RTL_BASE_H
) $(OBSTACK_H
) \
2966 $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(GGC_H
) \
2967 $(READ_MD_H
) $(GENSUPPORT_H
) $(FNMATCH_H
)
2968 build
/genautomata.o
: genautomata.
cc $(RTL_BASE_H
) $(OBSTACK_H
) \
2969 $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(VEC_H
) \
2970 $(HASHTAB_H
) $(GENSUPPORT_H
) $(FNMATCH_H
)
2971 build
/gencheck.o
: gencheck.
cc all-tree.def
$(BCONFIG_H
) $(GTM_H
) \
2972 $(SYSTEM_H
) $(CORETYPES_H
) tree.def c-family
/c-common.def \
2973 $(lang_tree_files
) gimple.def
2974 build
/genchecksum.o
: genchecksum.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(MD5_H
)
2975 build
/gencodes.o
: gencodes.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
2976 $(CORETYPES_H
) $(GTM_H
) errors.h
$(GENSUPPORT_H
)
2977 build
/genconditions.o
: genconditions.
cc $(RTL_BASE_H
) $(BCONFIG_H
) \
2978 $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(HASHTAB_H
) \
2979 $(READ_MD_H
) $(GENSUPPORT_H
)
2980 build
/genconfig.o
: genconfig.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
2981 $(CORETYPES_H
) $(GTM_H
) errors.h
$(GENSUPPORT_H
)
2982 build
/genconstants.o
: genconstants.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2983 $(CORETYPES_H
) errors.h
$(READ_MD_H
)
2984 build
/genemit.o
: genemit.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
2985 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
) internal-fn.def
2986 build
/genenums.o
: genenums.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2987 $(CORETYPES_H
) errors.h
$(READ_MD_H
)
2988 build
/genextract.o
: genextract.
cc $(RTL_BASE_H
) $(BCONFIG_H
) \
2989 $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
2990 build
/genflags.o
: genflags.
cc $(RTL_BASE_H
) $(OBSTACK_H
) $(BCONFIG_H
) \
2991 $(SYSTEM_H
) $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
2992 build
/gentarget-def.o
: gentarget-def.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
2993 $(CORETYPES_H
) $(GTM_H
) $(RTL_BASE_H
) errors.h
$(READ_MD_H
) \
2994 $(GENSUPPORT_H
) $(HASH_TABLE_H
) target-insns.def
2995 build
/gengenrtl.o
: gengenrtl.
cc $(BCONFIG_H
) $(SYSTEM_H
) rtl.def
2997 # The gengtype generator program is special: Two versions are built.
2998 # One is for the build machine, and one is for the host to allow
2999 # plugins to define their types and generate the supporting GGC
3000 # datastructures and routines with GTY markers.
3001 # The host object files depend on CONFIG_H, and the build objects
3002 # on BCONFIG_H. For the build objects, add -DGENERATOR_FILE manually,
3003 # the build-%: rule doesn't apply to them.
3005 GENGTYPE_OBJS
= gengtype.o gengtype-parse.o gengtype-state.o \
3006 gengtype-lex.o errors.o
3008 gengtype-lex.o build
/gengtype-lex.o
: gengtype-lex.
cc gengtype.h
$(SYSTEM_H
)
3009 CFLAGS-gengtype-lex.o
+= -DHOST_GENERATOR_FILE
3010 build
/gengtype-lex.o
: $(BCONFIG_H
)
3012 gengtype-parse.o build
/gengtype-parse.o
: gengtype-parse.
cc gengtype.h \
3014 CFLAGS-gengtype-parse.o
+= -DHOST_GENERATOR_FILE
3015 build
/gengtype-parse.o
: $(BCONFIG_H
)
3017 gengtype-state.o build
/gengtype-state.o
: gengtype-state.
cc $(SYSTEM_H
) \
3018 gengtype.h errors.h version.h
$(HASHTAB_H
) $(OBSTACK_H
) \
3020 CFLAGS-gengtype-state.o
+= -DHOST_GENERATOR_FILE
3021 build
/gengtype-state.o
: $(BCONFIG_H
)
3022 gengtype.o build
/gengtype.o
: gengtype.
cc $(SYSTEM_H
) gengtype.h \
3023 rtl.def insn-notes.def errors.h version.h \
3024 $(HASHTAB_H
) $(OBSTACK_H
) $(XREGEX_H
)
3025 CFLAGS-gengtype.o
+= -DHOST_GENERATOR_FILE
3026 build
/gengtype.o
: $(BCONFIG_H
)
3028 CFLAGS-errors.o
+= -DHOST_GENERATOR_FILE
3030 build
/genmddeps.o
: genmddeps.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
3031 errors.h
$(READ_MD_H
)
3032 build
/genmodes.o
: genmodes.
cc $(BCONFIG_H
) $(SYSTEM_H
) errors.h \
3033 $(HASHTAB_H
) machmode.def
$(extra_modes_file
)
3034 build
/genopinit.o
: genopinit.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3035 $(CORETYPES_H
) $(GTM_H
) errors.h
$(GENSUPPORT_H
) optabs.def
3036 build
/genoutput.o
: genoutput.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3037 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
3038 build
/genpeep.o
: genpeep.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3039 $(CORETYPES_H
) $(GTM_H
) errors.h
$(GENSUPPORT_H
) toplev.h \
3040 $(DIAGNOSTIC_CORE_H
)
3041 build
/genpreds.o
: genpreds.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3042 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
) $(OBSTACK_H
)
3043 build
/genrecog.o
: genrecog.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3044 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
) \
3045 $(HASH_TABLE_H
) inchash.h
3046 build
/genhooks.o
: genhooks.
cc $(TARGET_DEF
) $(C_TARGET_DEF
) \
3047 $(COMMON_TARGET_DEF
) $(D_TARGET_DEF
) $(RUST_TARGET_DEF
) $(BCONFIG_H
) \
3048 $(SYSTEM_H
) errors.h
3049 build
/genmddump.o
: genmddump.
cc $(RTL_BASE_H
) $(BCONFIG_H
) $(SYSTEM_H
) \
3050 $(CORETYPES_H
) $(GTM_H
) errors.h
$(READ_MD_H
) $(GENSUPPORT_H
)
3051 build
/genmatch.o
: genmatch.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(CORETYPES_H
) \
3052 errors.h
$(HASH_TABLE_H
) hash-map.h
$(GGC_H
) is-a.h ordered-hash-map.h \
3053 tree.def builtins.def internal-fn.def case-cfn-macros.h
$(CPPLIB_H
)
3054 build
/gencfn-macros.o
: gencfn-macros.
cc $(BCONFIG_H
) $(SYSTEM_H
) \
3055 $(CORETYPES_H
) errors.h
$(HASH_TABLE_H
) hash-set.h builtins.def \
3058 # Compile the programs that generate insn-* from the machine description.
3059 # They are compiled with $(COMPILER_FOR_BUILD), and associated libraries,
3060 # since they need to run on this machine
3061 # even if GCC is being compiled to run on some other machine.
3063 # All these programs use the RTL reader ($(BUILD_RTL)).
3064 genprogrtl
= attr attr-common attrtab automata codes conditions config emit \
3065 extract flags mddump opinit output peep preds recog target-def
3066 $(genprogrtl
:%=build
/gen
%$(build_exeext
)): $(BUILD_RTL
)
3068 # All these programs use the MD reader ($(BUILD_MD)).
3069 genprogmd
= $(genprogrtl
) mddeps constants enums
3070 $(genprogmd
:%=build
/gen
%$(build_exeext
)): $(BUILD_MD
)
3072 # All these programs need to report errors.
3073 genprogerr
= $(genprogmd
) genrtl modes gtype hooks cfn-macros condmd
3074 $(genprogerr
:%=build
/gen
%$(build_exeext
)): $(BUILD_ERRORS
)
3076 # Remaining build programs.
3077 genprog
= $(genprogerr
) check checksum match
3079 # These programs need libs over and above what they get from the above list.
3080 build
/genautomata
$(build_exeext
) : BUILD_LIBS
+= -lm
3082 build
/genrecog
$(build_exeext
) : build
/hash-table.o build
/inchash.o
3083 build
/gencfn-macros
$(build_exeext
) : build
/hash-table.o build
/vec.o \
3084 build
/ggc-none.o build
/sort.o
3086 # For stage1 and when cross-compiling use the build libcpp which is
3087 # built with NLS disabled. For stage2+ use the host library and
3089 ifeq ($(build_objdir
),$(build_libobjdir
))
3090 BUILD_CPPLIB
= $(build_libobjdir
)/libcpp
/libcpp.a
3092 BUILD_CPPLIB
= $(CPPLIB
) $(LIBIBERTY
)
3093 build
/genmatch
$(build_exeext
): BUILD_LIBDEPS
+= $(LIBINTL_DEP
) $(LIBICONV_DEP
)
3094 build
/genmatch
$(build_exeext
): BUILD_LIBS
+= $(LIBINTL
) $(LIBICONV
)
3097 build
/genmatch
$(build_exeext
) : $(BUILD_CPPLIB
) \
3098 $(BUILD_ERRORS
) build
/vec.o build
/hash-table.o build
/sort.o
3100 # These programs are not linked with the MD reader.
3101 build
/gengtype
$(build_exeext
) : build
/gengtype-lex.o build
/gengtype-parse.o \
3102 build
/gengtype-state.o build
/errors.o
3104 gengtype
$(exeext
) : gengtype.o gengtype-lex.o gengtype-parse.o \
3105 gengtype-state.o errors.o
$(LIBDEPS
)
3106 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) -o
$@ \
3107 $(filter-out $(LIBDEPS
), $^
) $(LIBS
)
3109 # Rule for the generator programs:
3110 $(genprog
:%=build
/gen
%$(build_exeext
)): build
/gen
%$(build_exeext
): build
/gen
%.o
$(BUILD_LIBDEPS
)
3111 +$(LINKER_FOR_BUILD
) $(BUILD_LINKERFLAGS
) $(BUILD_LDFLAGS
) -o
$@ \
3112 $(filter-out $(BUILD_LIBDEPS
), $^
) $(BUILD_LIBS
)
3114 omp-general.o
: omp-device-properties.h
3116 omp_device_properties
= @omp_device_properties@
3117 omp-device-properties.h
: s-omp-device-properties-h
; @true
3118 s-omp-device-properties-h
: @omp_device_property_deps@
3119 -rm -f tmp-omp-device-properties.h
; \
3120 for kind in kind arch isa
; do \
3121 echo
'const char omp_offload_device_'$${kind}'[] = ' \
3122 >> tmp-omp-device-properties.h
; \
3123 for prop in none
$(omp_device_properties
); do \
3124 [ "$$prop" = "none" ] && continue
; \
3125 tgt
=`echo "$$prop" | sed 's/=.*$$//'`; \
3126 props
=`echo "$$prop" | sed 's/.*=//'`; \
3127 echo
"\"$$tgt\\0\"" >> tmp-omp-device-properties.h
; \
3128 sed
-n
's/^'$${kind}': //p' $${props} \
3129 | sed
's/[[:blank:]]/ /g;s/ */ /g;s/^ //;s/ $$//;s/ /\\0/g;s/^/"/;s/$$/\\0\\0"/' \
3130 >> tmp-omp-device-properties.h
; \
3132 echo
'"";' >> tmp-omp-device-properties.h
; \
3134 $(SHELL
) $(srcdir)/..
/move-if-change tmp-omp-device-properties.h \
3135 omp-device-properties.h
3136 $(STAMP
) s-omp-device-properties-h
3138 # Generated source files for gengtype. Prepend inclusion of
3139 # config.h/bconfig.h because AIX requires _LARGE_FILES to be defined before
3140 # any system header is included.
3141 gengtype-lex.
cc : gengtype-lex.l
3142 -$(FLEX
) $(FLEXFLAGS
) -o
$@
$< && { \
3143 echo
'#ifdef HOST_GENERATOR_FILE' > $@.tmp
; \
3144 echo
'#include "config.h"' >> $@.tmp
; \
3145 echo
'#else' >> $@.tmp
; \
3146 echo
'#include "bconfig.h"' >> $@.tmp
; \
3147 echo
'#endif' >> $@.tmp
; \
3153 # Remake internationalization support.
3154 CFLAGS-intl.o
+= -DLOCALEDIR
=\"$(localedir
)\"
3159 PREPROCESSOR_DEFINES
= \
3160 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
3161 -DFIXED_INCLUDE_DIR
=\"$(libsubdir
)/include-fixed
\" \
3162 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
3163 -DGPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT
=$(gcc_gxx_include_dir_add_sysroot
) \
3164 -DGPLUSPLUS_TOOL_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)/$(target_noncanonical
)\" \
3165 -DGPLUSPLUS_BACKWARD_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)/backward
\" \
3166 -DGPLUSPLUS_LIBCXX_INCLUDE_DIR
=\"$(gcc_gxx_libcxx_include_dir
)\" \
3167 -DGPLUSPLUS_LIBCXX_INCLUDE_DIR_ADD_SYSROOT
=$(gcc_gxx_libcxx_include_dir_add_sysroot
) \
3168 -DLOCAL_INCLUDE_DIR
=\"$(local_includedir
)\" \
3169 -DCROSS_INCLUDE_DIR
=\"$(CROSS_SYSTEM_HEADER_DIR
)\" \
3170 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
3171 -DNATIVE_SYSTEM_HEADER_DIR
=\"$(NATIVE_SYSTEM_HEADER_DIR
)\" \
3172 -DPREFIX
=\"$(prefix)/\" \
3173 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc
/\" \
3174 @TARGET_SYSTEM_ROOT_DEFINE@
3176 CFLAGS-cppbuiltin.o
+= $(PREPROCESSOR_DEFINES
) -DBASEVER
=$(BASEVER_s
)
3177 cppbuiltin.o
: $(BASEVER
)
3179 CFLAGS-cppdefault.o
+= $(PREPROCESSOR_DEFINES
)
3181 # Note for the stamp targets, we run the program `true' instead of
3182 # having an empty command (nothing following the semicolon).
3184 # genversion.cc is run on the build machine to generate version.h
3185 CFLAGS-build
/genversion.o
+= -DBASEVER
=$(BASEVER_s
) -DDATESTAMP
=$(DATESTAMP_s
) \
3186 -DREVISION
=$(REVISION_s
) \
3187 -DDEVPHASE
=$(DEVPHASE_s
) -DPKGVERSION
=$(PKGVERSION_s
) \
3188 -DBUGURL
=$(BUGURL_s
)
3190 build
/genversion.o
: genversion.
cc $(BCONFIG_H
) $(SYSTEM_H
) $(srcdir)/DATESTAMP
3192 build
/genversion
$(build_exeext
): build
/genversion.o
3193 +$(LINKER_FOR_BUILD
) $(BUILD_LINKERFLAGS
) $(BUILD_LDFLAGS
) \
3194 build
/genversion.o
-o
$@
3196 version.h
: s-version
; @true
3197 s-version
: build
/genversion
$(build_exeext
)
3198 build
/genversion
$(build_exeext
) > tmp-version.h
3199 $(SHELL
) $(srcdir)/..
/move-if-change tmp-version.h version.h
3202 # gcov.o needs $(ZLIBINC) added to the include flags.
3203 CFLAGS-gcov.o
+= $(ZLIBINC
)
3205 GCOV_OBJS
= gcov.o json.o
3206 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
3207 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) \
3208 hash-table.o ggc-none.o
$(LIBS
) $(ZLIB
) -o
$@
3209 GCOV_DUMP_OBJS
= gcov-dump.o
3210 gcov-dump
$(exeext
): $(GCOV_DUMP_OBJS
) $(LIBDEPS
)
3211 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) $(GCOV_DUMP_OBJS
) \
3212 hash-table.o ggc-none.o\
3215 GCOV_TOOL_DEP_FILES
= $(srcdir)/..
/libgcc
/libgcov-util.c gcov-io.
cc $(GCOV_IO_H
) \
3216 $(srcdir)/..
/libgcc
/libgcov-driver.c
$(srcdir)/..
/libgcc
/libgcov-driver-system.c \
3217 $(srcdir)/..
/libgcc
/libgcov-merge.c
$(srcdir)/..
/libgcc
/libgcov.h \
3218 $(SYSTEM_H
) coretypes.h
$(TM_H
) $(CONFIG_H
) version.h intl.h
$(DIAGNOSTIC_H
)
3219 libgcov-util.o
: $(srcdir)/..
/libgcc
/libgcov-util.c
$(GCOV_TOOL_DEP_FILES
)
3220 +$(COMPILER
) -c
$(ALL_COMPILERFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -o
$@
$<
3221 libgcov-driver-tool.o
: $(srcdir)/..
/libgcc
/libgcov-driver.c
$(GCOV_TOOL_DEP_FILES
)
3222 +$(COMPILER
) -c
$(ALL_COMPILERFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
3223 -DIN_GCOV_TOOL
=1 -o
$@
$<
3224 libgcov-merge-tool.o
: $(srcdir)/..
/libgcc
/libgcov-merge.c
$(GCOV_TOOL_DEP_FILES
)
3225 +$(COMPILER
) -c
$(ALL_COMPILERFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
3226 -DIN_GCOV_TOOL
=1 -o
$@
$<
3227 GCOV_TOOL_OBJS
= gcov-tool.o libgcov-util.o libgcov-driver-tool.o libgcov-merge-tool.o
3228 gcov-tool
$(exeext
): $(GCOV_TOOL_OBJS
) $(LIBDEPS
)
3229 +$(LINKER
) $(ALL_LINKERFLAGS
) $(LDFLAGS
) $(GCOV_TOOL_OBJS
) $(LIBS
) -o
$@
3231 # Build the include directories. The stamp files are stmp-* rather than
3232 # s-* so that mostlyclean does not force the include directory to
3235 # Build the include directories.
3236 stmp-int-hdrs
: $(STMP_FIXINC
) $(T_GLIMITS_H
) $(T_STDINT_GCC_H
) $(USER_H
) fixinc_list
3237 # Copy in the headers provided with gcc.
3239 # The sed command gets just the last file name component;
3240 # this is necessary because VPATH could add a dirname.
3241 # Using basename would be simpler, but some systems don't have it.
3243 # The touch command is here to workaround an AIX/Linux NFS bug.
3245 # The move-if-change + cp -p twists for limits.h are intended to preserve
3246 # the time stamp when we regenerate, to prevent pointless rebuilds during
3247 # e.g. install-no-fixedincludes.
3248 -if
[ -d
include ] ; then true
; else mkdir
include; chmod a
+rx
include; fi
3249 -if
[ -d include-fixed
] ; then true
; else mkdir include-fixed
; chmod a
+rx include-fixed
; fi
3250 for file in ..
$(USER_H
); do \
3251 if
[ X
$$file != X..
]; then \
3252 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
3253 $(STAMP
) include/$$realfile; \
3254 rm -f
include/$$realfile; \
3255 cp
$$file include; \
3256 chmod a
+r
include/$$realfile; \
3259 for file in ..
$(USER_H_INC_NEXT_PRE
); do \
3260 if
[ X
$$file != X..
]; then \
3261 mv
include/$$file include/x_
$$file; \
3262 echo
"#include_next <$$file>" >include/$$file; \
3263 cat
include/x_
$$file >>include/$$file; \
3264 rm -f
include/x_
$$file; \
3265 chmod a
+r
include/$$file; \
3268 for file in ..
$(USER_H_INC_NEXT_POST
); do \
3269 if
[ X
$$file != X..
]; then \
3270 echo
"#include_next <$$file>" >>include/$$file; \
3271 chmod a
+r
include/$$file; \
3274 rm -f
include/stdint.h
3275 if
[ $(USE_GCC_STDINT
) = wrap
]; then \
3276 rm -f
include/stdint-gcc.h
; \
3277 cp
$(srcdir)/ginclude
/stdint-gcc.h
include/stdint-gcc.h
; \
3278 chmod a
+r
include/stdint-gcc.h
; \
3279 cp
$(srcdir)/ginclude
/stdint-wrap.h
include/stdint.h
; \
3280 chmod a
+r
include/stdint.h
; \
3281 elif
[ $(USE_GCC_STDINT
) = provide
]; then \
3282 cp
$(T_STDINT_GCC_H
) include/stdint.h
; \
3283 chmod a
+r
include/stdint.h
; \
3285 set
-e
; for ml in
`cat fixinc_list`; do \
3286 sysroot_headers_suffix
=`echo $${ml} | sed -e 's/;.*$$//'`; \
3287 multi_dir
=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
3288 include_dir
=include$${multi_dir}; \
3289 if
$(LIMITS_H_TEST
) ; then \
3290 cat
$(srcdir)/limitx.h
$(T_GLIMITS_H
) $(srcdir)/limity.h
> tmp-xlimits.h
; \
3292 cat
$(T_GLIMITS_H
) > tmp-xlimits.h
; \
3294 $(mkinstalldirs
) $${include_dir}; \
3295 chmod a
+rx
$${include_dir} || true
; \
3296 $(SHELL
) $(srcdir)/..
/move-if-change \
3297 tmp-xlimits.h tmp-limits.h
; \
3298 rm -f
$${include_dir}/limits.h
; \
3299 cp
-p tmp-limits.h
$${include_dir}/limits.h
; \
3300 chmod a
+r
$${include_dir}/limits.h
; \
3301 cp
$(srcdir)/gsyslimits.h
$${include_dir}/syslimits.h
; \
3303 # Install the README
3304 if
[ x
$(STMP_FIXINC
) != x
]; then \
3305 rm -f include-fixed
/README
; \
3306 cp
$(srcdir)/..
/fixincludes
/README-fixinc include-fixed
/README
; \
3307 chmod a
+r include-fixed
/README
; \
3311 .PHONY
: install-gcc-tooldir
3312 install-gcc-tooldir
:
3313 $(mkinstalldirs
) $(DESTDIR
)$(gcc_tooldir
)
3315 macro_list
: s-macro_list
; @true
3316 s-macro_list
: $(GCC_PASSES
) cc1
$(exeext
)
3317 echo |
$(GCC_FOR_TARGET
) -nostdinc
-E
-dM
- | \
3318 sed
-n
-e
's/^#define \([^_][a-zA-Z0-9_]*\).*/\1/p' \
3319 -e
's/^#define \(_[^_A-Z][a-zA-Z0-9_]*\).*/\1/p' | \
3320 sort -u
> tmp-macro_list
3321 $(SHELL
) $(srcdir)/..
/move-if-change tmp-macro_list macro_list
3322 $(STAMP
) s-macro_list
3324 fixinc_list
: s-fixinc_list
; @true
3325 s-fixinc_list
: $(GCC_PASSES
)
3326 # Build up a list of multilib directories and corresponding sysroot
3327 # suffixes, in form sysroot;multilib.
3328 if
$(GCC_FOR_TARGET
) -print-sysroot-headers-suffix
> /dev
/null
2>&1; then \
3329 set
-e
; for ml in
`$(GCC_FOR_TARGET) -print-multi-lib`; do \
3330 multi_dir
=`echo $${ml} | sed -e 's/;.*$$//'`; \
3331 flags
=`echo $${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
3332 sfx
=`$(GCC_FOR_TARGET) $${flags} -print-sysroot-headers-suffix`; \
3333 if
[ "$${multi_dir}" = "." ]; \
3334 then multi_dir
=""; \
3336 multi_dir
=/$${multi_dir}; \
3338 echo
"$${sfx};$${multi_dir}"; \
3342 fi
> tmp-fixinc_list
3343 $(SHELL
) $(srcdir)/..
/move-if-change tmp-fixinc_list fixinc_list
3344 $(STAMP
) s-fixinc_list
3346 # The line below is supposed to avoid accidentally matching the
3347 # built-in suffix rule `.o:' to build fixincl out of fixincl.o. You'd
3348 # expect fixincl to be newer than fixincl.o, such that this situation
3349 # would never come up. As it turns out, if you use ccache with
3350 # CCACHE_HARDLINK enabled, the compiler doesn't embed the current
3351 # working directory in object files (-g absent, or -fno-working-dir
3352 # present), and build and host are the same, fixincl for the host will
3353 # build after fixincl for the build machine, getting a cache hit,
3354 # thereby updating the timestamp of fixincl.o in the host tree.
3355 # Because of CCACHE_HARDLINK, this will also update the timestamp in
3356 # the build tree, and so fixincl in the build tree will appear to be
3357 # out of date. Yuck.
3358 ..
/$(build_subdir
)/fixincludes
/fixincl
: ; @
:
3360 # Build fixed copies of system files.
3361 # Abort if no system headers available, unless building a crosscompiler.
3362 # FIXME: abort unless building --without-headers would be more accurate and less ugly
3363 stmp-fixinc
: gsyslimits.h macro_list fixinc_list \
3364 $(build_objdir
)/fixincludes
/fixincl \
3365 $(build_objdir
)/fixincludes
/fixinc.sh
3366 rm -rf include-fixed
; mkdir include-fixed
3367 -chmod a
+rx include-fixed
3368 if
[ -d ..
/prev-gcc
]; then \
3370 $(MAKE
) real-
$(INSTALL_HEADERS_DIR
) DESTDIR
=`pwd`/..
/gcc
/ \
3373 set
-e
; for ml in
`cat fixinc_list`; do \
3374 sysroot_headers_suffix
=`echo $${ml} | sed -e 's/;.*$$//'`; \
3375 multi_dir
=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
3376 fix_dir
=include-fixed
$${multi_dir}; \
3377 if
! $(inhibit_libc
) && test ! -d
${BUILD_SYSTEM_HEADER_DIR}; then \
3378 echo
"The directory (BUILD_SYSTEM_HEADER_DIR) that should contain system headers does not exist:" >&2 ; \
3379 echo
" ${BUILD_SYSTEM_HEADER_DIR}" >&2 ; \
3380 case
${build_os} in \
3382 echo
"(on Darwin this usually means you need to pass the --with-sysroot= flag to point to a valid MacOS SDK)" >&2; \
3385 tooldir_sysinc
=`echo "${gcc_tooldir}/sys-include" | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`; \
3386 if
test "x${BUILD_SYSTEM_HEADER_DIR}" = "x$${tooldir_sysinc}"; \
3387 then sleep
1; else exit
1; fi
; \
3389 $(mkinstalldirs
) $${fix_dir}; \
3390 chmod a
+rx
$${fix_dir} || true
; \
3391 (TARGET_MACHINE
='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
3392 SHELL
='$(SHELL)'; MACRO_LIST
=`${PWD_COMMAND}`/macro_list
; \
3393 gcc_dir
=`${PWD_COMMAND}` ; \
3394 export TARGET_MACHINE
srcdir SHELL MACRO_LIST
&& \
3395 cd
$(build_objdir
)/fixincludes
&& \
3396 $(SHELL
) .
/fixinc.sh
"$${gcc_dir}/$${fix_dir}" \
3397 $(BUILD_SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
) ); \
3400 $(STAMP
) stmp-fixinc
3403 # Install with the gcc headers files, not the fixed include files, which we
3404 # are typically not allowed to distribute. The general idea is to:
3405 # - Get to "install" with a bare set of internal headers, not the
3406 # fixed system ones,
3407 # - Prevent rebuilds of what normally depends on the headers, which is
3408 # useless for installation purposes and would rely on improper headers.
3409 # - Restore as much of the original state as possible.
3411 .PHONY
: install-no-fixedincludes
3413 install-no-fixedincludes
:
3414 # Stash the current set of headers away, save stamps we're going to
3415 # alter explicitly, and arrange for fixincludes not to run next time
3416 # we trigger a headers rebuild.
3418 -mv
include tmp-include
2>/dev
/null
3419 -mv include-fixed tmp-include-fixed
2>/dev
/null
3420 -mv stmp-int-hdrs tmp-stmp-int-hdrs
2>/dev
/null
3421 -mv stmp-fixinc tmp-stmp-fixinc
2>/dev
/null
3423 -cp
-p
$(srcdir)/gsyslimits.h
include/syslimits.h
3426 # Rebuild our internal headers, restore the original stamps so that
3427 # "install" doesn't trigger pointless rebuilds because of that update,
3429 $(MAKE
) $(FLAGS_TO_PASS
) stmp-int-hdrs
3430 -mv tmp-stmp-int-hdrs stmp-int-hdrs
2>/dev
/null
3431 -mv tmp-stmp-fixinc stmp-fixinc
2>/dev
/null
3432 $(MAKE
) $(FLAGS_TO_PASS
) install
3434 # Restore the original set of maybe-fixed headers
3435 -rm -rf
include; mv tmp-include
include 2>/dev
/null
3436 -rm -rf include-fixed
; mv tmp-include-fixed include-fixed
2>/dev
/null
3438 # Remake the info files.
3440 doc
: $(BUILD_INFO
) $(GENERATED_MANPAGES
)
3442 INFOFILES
= doc
/cpp.
info doc
/gcc.
info doc
/gccint.
info \
3443 doc
/gccinstall.
info doc
/cppinternals.
info
3445 info: $(INFOFILES
) lang.
info @GENINSRC@ srcinfo lang.srcinfo
3447 srcinfo
: $(INFOFILES
)
3448 -cp
-p
$^
$(srcdir)/doc
3450 TEXI_CPP_FILES
= cpp.texi fdl.texi cppenv.texi cppopts.texi \
3451 gcc-common.texi gcc-vers.texi
3453 TEXI_GCC_FILES
= gcc.texi gcc-common.texi gcc-vers.texi frontends.texi \
3454 standards.texi invoke.texi extend.texi md.texi objc.texi \
3455 gcov.texi trouble.texi bugreport.texi service.texi \
3456 contribute.texi compat.texi funding.texi gnu.texi gpl_v3.texi \
3457 fdl.texi contrib.texi cppenv.texi cppopts.texi avr-mmcu.texi \
3458 implement-c.texi implement-cxx.texi gcov-tool.texi gcov-dump.texi \
3461 # we explicitly use $(srcdir)/doc/tm.texi here to avoid confusion with
3462 # the generated tm.texi; the latter might have a more recent timestamp,
3463 # but we don't want to rebuild the info files unless the contents of
3464 # the *.texi files have changed.
3465 TEXI_GCCINT_FILES
= gccint.texi gcc-common.texi gcc-vers.texi \
3466 contribute.texi makefile.texi configterms.texi options.texi \
3467 portability.texi interface.texi passes.texi rtl.texi md.texi \
3468 $(srcdir)/doc
/tm.texi hostconfig.texi fragments.texi \
3469 configfiles.texi collect2.texi headerdirs.texi funding.texi \
3470 gnu.texi gpl_v3.texi fdl.texi contrib.texi languages.texi \
3471 sourcebuild.texi gty.texi libgcc.texi cfg.texi tree-ssa.texi \
3472 loop.texi generic.texi gimple.texi plugins.texi optinfo.texi \
3473 match-and-simplify.texi analyzer.texi ux.texi poly-int.texi
3475 TEXI_GCCINSTALL_FILES
= install.texi fdl.texi \
3476 gcc-common.texi gcc-vers.texi
3478 TEXI_CPPINT_FILES
= cppinternals.texi gcc-common.texi gcc-vers.texi
3480 # gcc-vers.texi is generated from the version files.
3481 gcc-vers.texi
: $(BASEVER
) $(DEVPHASE
)
3482 (echo
"@set version-GCC $(BASEVER_c)"; \
3483 if
[ "$(DEVPHASE_c)" = "experimental" ]; \
3484 then echo
"@set DEVELOPMENT"; \
3485 else echo
"@clear DEVELOPMENT"; \
3487 $(build_file_translate
) echo @set
srcdir `echo $(abs_srcdir) | sed -e 's|\\([@{}]\\)|@\\1|g'` >> $@T
3488 if
[ -n
"$(PKGVERSION)" ]; then \
3489 echo
"@set VERSION_PACKAGE $(PKGVERSION)" >> $@T
; \
3491 echo
"@set BUGURL $(BUGURL_TEXI)" >> $@T
; \
3495 # The *.1, *.7, *.info, *.dvi, and *.pdf files are being generated from implicit
3496 # patterns. To use them, put each of the specific targets with its
3497 # specific dependencies but no build commands.
3499 doc
/cpp.
info: $(TEXI_CPP_FILES
)
3500 doc
/gcc.
info: $(TEXI_GCC_FILES
)
3501 doc
/gccint.
info: $(TEXI_GCCINT_FILES
)
3502 doc
/cppinternals.
info: $(TEXI_CPPINT_FILES
)
3505 if
[ x
$(BUILD_INFO
) = xinfo
]; then \
3506 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I .
-I
$(gcc_docdir
) \
3507 -I
$(gcc_docdir
)/include -o
$@
$<; \
3510 # Duplicate entry to handle renaming of gccinstall.info
3511 doc
/gccinstall.
info: $(TEXI_GCCINSTALL_FILES
)
3512 if
[ x
$(BUILD_INFO
) = xinfo
]; then \
3513 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(gcc_docdir
) \
3514 -I
$(gcc_docdir
)/include -o
$@
$<; \
3517 doc
/cpp.
dvi: $(TEXI_CPP_FILES
)
3518 doc
/gcc.
dvi: $(TEXI_GCC_FILES
)
3519 doc
/gccint.
dvi: $(TEXI_GCCINT_FILES
)
3520 doc
/cppinternals.
dvi: $(TEXI_CPPINT_FILES
)
3522 doc
/cpp.pdf
: $(TEXI_CPP_FILES
)
3523 doc
/gcc.pdf
: $(TEXI_GCC_FILES
)
3524 doc
/gccint.pdf
: $(TEXI_GCCINT_FILES
)
3525 doc
/cppinternals.pdf
: $(TEXI_CPPINT_FILES
)
3527 $(build_htmldir
)/cpp/index.html
: $(TEXI_CPP_FILES
)
3528 $(build_htmldir
)/gcc
/index.html
: $(TEXI_GCC_FILES
)
3529 $(build_htmldir
)/gccint
/index.html
: $(TEXI_GCCINT_FILES
)
3530 $(build_htmldir
)/cppinternals
/index.html
: $(TEXI_CPPINT_FILES
)
3532 DVIFILES
= doc
/gcc.
dvi doc
/gccint.
dvi doc
/gccinstall.
dvi doc
/cpp.
dvi \
3533 doc
/cppinternals.
dvi
3535 dvi:: $(DVIFILES
) lang.
dvi
3538 $(TEXI2DVI
) -I .
-I
$(abs_docdir
) -I
$(abs_docdir
)/include -o
$@
$<
3540 # Duplicate entry to handle renaming of gccinstall.dvi
3541 doc
/gccinstall.
dvi: $(TEXI_GCCINSTALL_FILES
)
3542 $(TEXI2DVI
) -I .
-I
$(abs_docdir
) -I
$(abs_docdir
)/include -o
$@
$<
3544 PDFFILES
= doc
/gcc.pdf doc
/gccint.pdf doc
/gccinstall.pdf doc
/cpp.pdf \
3545 doc
/cppinternals.pdf
3547 pdf
:: $(PDFFILES
) lang.pdf
3550 $(TEXI2PDF
) -I .
-I
$(abs_docdir
) -I
$(abs_docdir
)/include -o
$@
$<
3552 # Duplicate entry to handle renaming of gccinstall.pdf
3553 doc
/gccinstall.pdf
: $(TEXI_GCCINSTALL_FILES
)
3554 $(TEXI2PDF
) -I .
-I
$(abs_docdir
) -I
$(abs_docdir
)/include -o
$@
$<
3556 # List the directories or single hmtl files which are installed by
3557 # install-html. The lang.html file triggers language fragments to build
3558 # html documentation.
3559 HTMLS_INSTALL
=$(build_htmldir
)/cpp $(build_htmldir
)/gcc \
3560 $(build_htmldir
)/gccinstall
$(build_htmldir
)/gccint \
3561 $(build_htmldir
)/cppinternals
3563 # List the html file targets.
3564 HTMLS_BUILD
=$(build_htmldir
)/cpp/index.html
$(build_htmldir
)/gcc
/index.html \
3565 $(build_htmldir
)/gccinstall
/index.html
$(build_htmldir
)/gccint
/index.html \
3566 $(build_htmldir
)/cppinternals
/index.html lang.html
3568 html
:: $(HTMLS_BUILD
)
3570 $(build_htmldir
)/%/index.html
: %.texi
3571 $(mkinstalldirs
) $(@D
)
3573 $(TEXI2HTML
) $(MAKEINFO_TOC_INLINE_FLAG
) \
3574 -I
$(abs_docdir
) -I
$(abs_docdir
)/include -o
$(@D
) $<
3576 # Duplicate entry to handle renaming of gccinstall
3577 $(build_htmldir
)/gccinstall
/index.html
: $(TEXI_GCCINSTALL_FILES
)
3578 $(mkinstalldirs
) $(@D
)
3580 SOURCEDIR
=$(abs_docdir
) \
3582 $(SHELL
) $(srcdir)/doc
/install.texi2html
3584 MANFILES
= doc
/gcov
.1 doc
/cpp.1 doc
/gcc
.1 doc
/gfdl
.7 doc
/gpl
.7 \
3585 doc
/fsf-funding
.7 doc
/gcov-tool
.1 doc
/gcov-dump
.1 \
3586 $(if
$(filter yes
,@enable_lto@
),doc
/lto-dump
.1)
3588 generated-manpages
: man
3590 man
: $(MANFILES
) lang.man @GENINSRC@ srcman lang.srcman
3593 -cp
-p
$^
$(srcdir)/doc
3597 -($(POD2MAN
) --section
=1 $< > $(@
).T
$$$$ && \
3598 mv
-f
$(@
).T
$$$$ $@
) || \
3599 (rm -f
$(@
).T
$$$$ && exit
1)
3603 -($(POD2MAN
) --section
=7 $< > $(@
).T
$$$$ && \
3604 mv
-f
$(@
).T
$$$$ $@
) || \
3605 (rm -f
$(@
).T
$$$$ && exit
1)
3609 -$(TEXI2POD
) -DBUGURL
="$(BUGURL_TEXI)" $< > $@
3611 .INTERMEDIATE
: cpp.pod gcc.pod gfdl.pod fsf-funding.pod gpl.pod
3612 cpp.pod
: cpp.texi cppenv.texi cppopts.texi
3614 # These next rules exist because the output name is not the same as
3615 # the input name, so our implicit %.pod rule will not work.
3617 gcc.pod
: invoke.texi cppenv.texi cppopts.texi gcc-vers.texi
3619 -$(TEXI2POD
) $< > $@
3622 -$(TEXI2POD
) $< > $@
3623 fsf-funding.pod
: funding.texi
3625 -$(TEXI2POD
) $< > $@
3626 gpl.pod
: gpl_v3.texi
3628 -$(TEXI2POD
) $< > $@
3631 # Deletion of files made during compilation.
3632 # There are four levels of this:
3633 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
3634 # `mostlyclean' is useful while working on a particular type of machine.
3635 # It deletes most, but not all, of the files made by compilation.
3636 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
3637 # `clean' deletes everything made by running `make all'.
3638 # `distclean' also deletes the files made by config.
3639 # `maintainer-clean' also deletes everything that could be regenerated
3640 # automatically, except for `configure'.
3641 # We remove as much from the language subdirectories as we can
3642 # (less duplicated code).
3644 mostlyclean: lang.
mostlyclean
3645 -rm -f
$(MOSTLYCLEANFILES
)
3646 -rm -f
*$(objext
) c-family
/*$(objext
)
3647 -rm -f
*$(coverageexts
)
3648 # Delete build programs
3651 # Delete other built files.
3652 -rm -f specs.h options.
cc options.h options-save.
cc
3653 # Delete the stamp and temporary files.
3654 -rm -f s-
* tmp-
* stamp-
* stmp-
*
3655 -rm -f
*/stamp-
* */tmp-
*
3656 # Delete debugging dump files.
3657 -rm -f
*.
[0-9][0-9].
* */*.
[0-9][0-9].
*
3658 # Delete some files made during installation.
3659 -rm -f specs
$(SPECS
)
3660 -rm -f collect collect2 mips-tfile mips-tdump
3661 # Delete unwanted output files from TeX.
3662 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
3663 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
3664 # Delete sorted indices we don't actually use.
3665 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
3666 # Delete core dumps.
3668 # Delete file generated for gengtype
3669 -rm -f gtyp-input.list
3670 # Delete files generated by gengtype
3674 # Delete genchecksum outputs
3675 -rm -f
*-checksum.
cc
3676 # Delete lock-and-run bits
3677 -rm -rf linkfe.lck lock-stamp.
*
3679 # Delete all files made by compilation
3680 # that don't exist in the distribution.
3681 clean: mostlyclean lang.
clean
3682 -rm -f libgcc.a libgcc_eh.a libgcov.a
3685 -rm -f config.h tconfig.h bconfig.h tm_p.h tm.h
3686 -rm -f options.
cc options.h optionlist
3690 # Delete the include directories.
3691 -rm -rf
include include-fixed
3693 # Delete all files that users would normally create
3694 # while building and installing GCC.
3695 distclean: clean lang.
distclean
3696 -rm -f auto-host.h auto-build.h
3698 -rm -f config.status config.run config.cache config.bak
3699 -rm -f Make-lang Make-hooks Make-host Make-target
3700 -rm -f Makefile
*.oaux
3701 -rm -f gthr-default.h
3704 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
3705 -rm -f testsuite
/*.log testsuite
/*.sum
3706 -cd testsuite
&& rm -f x
*.x
*.x?
*.exe
*.rpo
*.o
*.s
*.S
*.
cc
3707 -cd testsuite
&& rm -f
*.out
*.gcov
*$(coverageexts
)
3708 -rm -rf
${QMTEST_DIR} stamp-qmtest
3709 -rm -f .gdbinit configargs.h
3711 # Delete po/*.gmo only if we are not building in the source directory.
3712 -if
[ ! -f po
/exgettext
]; then
rm -f po
/*.gmo
; fi
3713 -rmdir ada cp f java objc intl po testsuite plugin
2>/dev
/null
3715 # Get rid of every file that's generated from some other file, except for `configure'.
3716 # Most of these files ARE PRESENT in the GCC distribution.
3718 @echo
'This command is intended for maintainers to use; it'
3719 @echo
'deletes files that may need special tools to rebuild.'
3720 $(MAKE
) lang.maintainer-clean
distclean
3721 -rm -f
cpp.??s
cpp.
*aux
3722 -rm -f gcc.??s gcc.
*aux
3723 -rm -f
$(gcc_docdir
)/*.
info $(gcc_docdir
)/*.1 $(gcc_docdir
)/*.7 $(gcc_docdir
)/*.
dvi $(gcc_docdir
)/*.pdf
3725 # Entry points `install', `install-strip', and `uninstall'.
3726 # Also use `install-collect2' to install collect2 when the config files don't.
3728 # Copy the compiler files into directories where they will be run.
3729 # Install the driver last so that the window when things are
3731 install: install-common
$(INSTALL_HEADERS
) \
3732 install-cpp install-man install-info install-@POSUB@ \
3733 install-driver install-lto-wrapper install-gcc-ar
3735 ifeq ($(enable_plugin
),yes
)
3736 install: install-plugin
3739 install-strip
: override INSTALL_PROGRAM
= $(INSTALL_STRIP_PROGRAM
)
3741 install-strip
: STRIPPROG
= $(STRIP
)
3744 install-strip
: install
3746 # Handle cpp installation.
3747 install-cpp
: installdirs cpp$(exeext
)
3748 -if
test "$(enable_as_accelerator)" != "yes" ; then \
3749 rm -f
$(DESTDIR
)$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
); \
3750 $(INSTALL_PROGRAM
) -m
755 cpp$(exeext
) $(DESTDIR
)$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
); \
3751 if
[ x
$(cpp_install_dir
) != x
]; then \
3752 rm -f
$(DESTDIR
)$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
3753 $(INSTALL_PROGRAM
) -m
755 cpp$(exeext
) $(DESTDIR
)$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
3757 # Create the installation directories.
3758 # $(libdir)/gcc/include isn't currently searched by cpp.
3760 $(mkinstalldirs
) $(DESTDIR
)$(libsubdir
)
3761 $(mkinstalldirs
) $(DESTDIR
)$(libexecsubdir
)
3762 $(mkinstalldirs
) $(DESTDIR
)$(bindir)
3763 $(mkinstalldirs
) $(DESTDIR
)$(includedir)
3764 $(mkinstalldirs
) $(DESTDIR
)$(infodir)
3765 $(mkinstalldirs
) $(DESTDIR
)$(man1dir)
3766 $(mkinstalldirs
) $(DESTDIR
)$(man7dir)
3768 PLUGIN_HEADERS
= $(TREE_H
) $(CONFIG_H
) $(SYSTEM_H
) coretypes.h
$(TM_H
) \
3769 toplev.h
$(DIAGNOSTIC_CORE_H
) $(BASIC_BLOCK_H
) $(HASH_TABLE_H
) \
3770 tree-ssa-alias.h
$(INTERNAL_FN_H
) gimple-fold.h tree-eh.h gimple-expr.h \
3771 gimple.h is-a.h memmodel.h
$(TREE_PASS_H
) $(GCC_PLUGIN_H
) \
3772 $(GGC_H
) $(TREE_DUMP_H
) $(PRETTY_PRINT_H
) $(OPTS_H
) $(PARAMS_H
) \
3773 $(tm_file_list
) $(tm_include_list
) $(tm_p_file_list
) $(tm_p_include_list
) \
3774 $(host_xm_file_list
) $(host_xm_include_list
) $(xm_include_list
) \
3775 intl.h
$(PLUGIN_VERSION_H
) $(DIAGNOSTIC_H
) ${C_TREE_H} \
3776 $(C_COMMON_H
) c-family
/c-objc.h
$(C_PRETTY_PRINT_H
) \
3777 tree-iterator.h
$(PLUGIN_H
) $(TREE_SSA_H
) langhooks.h incpath.h debug.h \
3778 $(EXCEPT_H
) tree-ssa-sccvn.h real.h output.h
$(IPA_UTILS_H
) \
3779 ipa-param-manipulation.h
$(C_PRAGMA_H
) $(CPPLIB_H
) $(FUNCTION_H
) \
3780 cppdefault.h flags.h
$(MD5_H
) params.def params.h params-enum.h \
3781 prefix.h tree-inline.h
$(GIMPLE_PRETTY_PRINT_H
) realmpfr.h \
3782 $(IPA_PROP_H
) $(TARGET_H
) $(RTL_H
) $(TM_P_H
) $(CFGLOOP_H
) $(EMIT_RTL_H
) \
3783 version.h stringpool.h gimplify.h gimple-iterator.h gimple-ssa.h \
3784 fold-const.h fold-const-call.h tree-cfg.h tree-into-ssa.h tree-ssanames.h \
3785 print-tree.h varasm.h context.h tree-phinodes.h stor-layout.h \
3786 ssa-iterators.h
$(RESOURCE_H
) tree-cfgcleanup.h attribs.h calls.h \
3787 cfgexpand.h diagnostic-color.h gcc-symtab.h gimple-builder.h gimple-low.h \
3788 gimple-walk.h gimplify-me.h pass_manager.h print-rtl.h stmt.h \
3789 tree-dfa.h tree-hasher.h tree-nested.h tree-object-size.h tree-outof-ssa.h \
3790 tree-parloops.h tree-ssa-address.h tree-ssa-coalesce.h tree-ssa-dom.h \
3791 tree-ssa-loop.h tree-ssa-loop-ivopts.h tree-ssa-loop-manip.h \
3792 tree-ssa-loop-niter.h tree-ssa-ter.h tree-ssa-threadedge.h \
3793 tree-ssa-threadupdate.h inchash.h wide-int.h signop.h hash-map.h \
3794 hash-set.h dominance.h cfg.h cfgrtl.h cfganal.h cfgbuild.h cfgcleanup.h \
3795 lcm.h cfgloopmanip.h file-prefix-map.h builtins.def
$(INSN_ATTR_H
) \
3796 pass-instances.def params.list
$(srcdir)/..
/include/gomp-constants.h \
3799 # generate the 'build fragment' b-header-vars
3800 s-header-vars
: Makefile
3801 rm -f tmp-header-vars
3802 # The first sed gets the list "header variables" as the list variables
3803 # assigned in Makefile and having _H at the end of the name. "sed -n" proved
3804 # more portable than a trailing "-e d" to filter out the uninteresting lines,
3805 # in particular on ia64-hpux where "s/.../p" only prints if -n was requested
3807 $(foreach header_var
,$(shell sed
< Makefile
-n
-e
's/^\([A-Z0-9_]*_H\)[ ]*=.*/\1/p'),echo
$(header_var
)=$(shell echo
$($(header_var
):$(srcdir)/%=...
/%) | sed
-e
's~\.\.\./config/~config/~' -e
's~\.\.\./common/config/~common/config/~' -e
's~\.\.\.[^ ]*/~~g') >> tmp-header-vars
;)
3808 $(SHELL
) $(srcdir)/..
/move-if-change tmp-header-vars b-header-vars
3809 $(STAMP
) s-header-vars
3812 install-gengtype
: installdirs gengtype
$(exeext
) gtype.state
3813 $(mkinstalldirs
) $(DESTDIR
)$(plugin_resourcesdir
)
3814 $(INSTALL_DATA
) gtype.state
$(DESTDIR
)$(plugin_resourcesdir
)/gtype.state
3815 $(mkinstalldirs
) $(DESTDIR
)$(plugin_bindir
)
3816 $(INSTALL_PROGRAM
) gengtype
$(exeext
) $(DESTDIR
)$(plugin_bindir
)/gengtype
$(exeext
)
3818 # Install the headers needed to build a plugin.
3819 install-plugin
: installdirs lang.install-plugin s-header-vars install-gengtype
3820 # We keep the directory structure for files in config, common/config or
3821 # c-family and .def files. All other files are flattened to a single directory.
3822 $(mkinstalldirs
) $(DESTDIR
)$(plugin_includedir
)
3823 headers
=`echo $(sort $(PLUGIN_HEADERS)) $$(cd $(srcdir); echo *.h *.def) | tr ' ' '\012' | sort -u`; \
3824 srcdirstrip
=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
3825 for file in
$$headers; do \
3826 if
[ -f
$$file ] ; then \
3828 elif
[ -f
$(srcdir)/$$file ]; then \
3829 path
=$(srcdir)/$$file; \
3833 "$(srcdir)"/config
/* |
"$(srcdir)"/common
/config
/* \
3834 |
"$(srcdir)"/c-family
/* |
"$(srcdir)"/*.def
) \
3835 base
=`echo "$$path" | sed -e "s|$$srcdirstrip/||"`;; \
3836 *) base
=`basename $$path` ;; \
3838 dest
=$(plugin_includedir
)/$$base; \
3839 echo
$(INSTALL_DATA
) $$path $(DESTDIR
)$$dest; \
3840 dir=`dirname $$dest`; \
3841 $(mkinstalldirs
) $(DESTDIR
)$$dir; \
3842 $(INSTALL_DATA
) $$path $(DESTDIR
)$$dest; \
3844 $(INSTALL_DATA
) b-header-vars
$(DESTDIR
)$(plugin_includedir
)/b-header-vars
3846 # Install the compiler executables built during cross compilation.
3847 install-common
: native lang.install-common
installdirs
3848 for file in
$(COMPILERS
); do \
3849 if
[ -f
$$file ] ; then \
3850 rm -f
$(DESTDIR
)$(libexecsubdir
)/$$file; \
3851 $(INSTALL_PROGRAM
) $$file $(DESTDIR
)$(libexecsubdir
)/$$file; \
3855 for file in
$(EXTRA_PROGRAMS
) $(COLLECT2
) ..
; do \
3856 if
[ x
"$$file" != x..
]; then \
3857 rm -f
$(DESTDIR
)$(libexecsubdir
)/$$file; \
3858 $(INSTALL_PROGRAM
) $$file $(DESTDIR
)$(libexecsubdir
)/$$file; \
3861 # We no longer install the specs file because its presence makes the
3862 # driver slower, and because people who need it can recreate it by
3863 # using -dumpspecs. We remove any old version because it would
3864 # otherwise override the specs built into the driver.
3865 rm -f
$(DESTDIR
)$(libsubdir
)/specs
3866 # Install gcov if it was compiled.
3867 -if
test "$(enable_as_accelerator)" != "yes" ; then \
3868 if
[ -f gcov
$(exeext
) ]; \
3870 rm -f
$(DESTDIR
)$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
3871 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(DESTDIR
)$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
3874 # Install gcov-tool if it was compiled.
3875 -if
test "$(enable_as_accelerator)" != "yes" ; then \
3876 if
[ -f gcov-tool
$(exeext
) ]; \
3878 rm -f
$(DESTDIR
)$(bindir)/$(GCOV_TOOL_INSTALL_NAME
)$(exeext
); \
3879 $(INSTALL_PROGRAM
) \
3880 gcov-tool
$(exeext
) $(DESTDIR
)$(bindir)/$(GCOV_TOOL_INSTALL_NAME
)$(exeext
); \
3883 # Install gcov-dump if it was compiled.
3884 -if
test "$(enable_as_accelerator)" != "yes" ; then \
3885 if
[ -f gcov-dump
$(exeext
) ]; \
3887 rm -f
$(DESTDIR
)$(bindir)/$(GCOV_DUMP_INSTALL_NAME
)$(exeext
); \
3888 $(INSTALL_PROGRAM
) \
3889 gcov-dump
$(exeext
) $(DESTDIR
)$(bindir)/$(GCOV_DUMP_INSTALL_NAME
)$(exeext
); \
3893 # Install the driver program as $(target_noncanonical)-gcc,
3894 # $(target_noncanonical)-gcc-$(version), and also as gcc if native.
3895 install-driver
: installdirs xgcc
$(exeext
)
3896 -rm -f
$(DESTDIR
)$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
3897 -$(INSTALL_PROGRAM
) xgcc
$(exeext
) $(DESTDIR
)$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
3898 -if
test "$(enable_as_accelerator)" != "yes" ; then \
3899 if
[ "$(GCC_INSTALL_NAME)" != "$(target_noncanonical)-gcc-$(version)" ]; then \
3900 rm -f
$(DESTDIR
)$(bindir)/$(FULL_DRIVER_NAME
); \
3901 ( cd
$(DESTDIR
)$(bindir) && \
3902 $(LN
) $(GCC_INSTALL_NAME
)$(exeext
) $(FULL_DRIVER_NAME
) ); \
3904 if
[ ! -f gcc-cross
$(exeext
) ] \
3905 && [ "$(GCC_INSTALL_NAME)" != "$(GCC_TARGET_INSTALL_NAME)" ]; then \
3906 rm -f
$(DESTDIR
)$(bindir)/$(target_noncanonical
)-gcc-tmp
$(exeext
); \
3907 ( cd
$(DESTDIR
)$(bindir) && \
3908 $(LN
) $(GCC_INSTALL_NAME
)$(exeext
) $(target_noncanonical
)-gcc-tmp
$(exeext
) && \
3909 mv
-f
$(target_noncanonical
)-gcc-tmp
$(exeext
) $(GCC_TARGET_INSTALL_NAME
)$(exeext
) ); \
3913 # Install the info files.
3914 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
3915 # to do the install.
3916 install-info
:: doc
installdirs \
3917 $(DESTDIR
)$(infodir)/cpp.
info \
3918 $(DESTDIR
)$(infodir)/gcc.
info \
3919 $(DESTDIR
)$(infodir)/cppinternals.
info \
3920 $(DESTDIR
)$(infodir)/gccinstall.
info \
3921 $(DESTDIR
)$(infodir)/gccint.
info \
3924 $(DESTDIR
)$(infodir)/%.
info: doc
/%.
info installdirs
3926 if
[ -f
$< ]; then \
3927 for f in
$(<)*; do \
3928 realfile
=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
3929 $(INSTALL_DATA
) $$f $(DESTDIR
)$(infodir)/$$realfile; \
3930 chmod a-x
$(DESTDIR
)$(infodir)/$$realfile; \
3933 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
3934 if
[ -f
$@
]; then \
3935 install-info
--dir-file
=$(DESTDIR
)$(infodir)/dir $@
; \
3939 dvi__strip_dir
= `echo $$p | sed -e 's|^.*/||'`;
3941 install-dvi
: $(DVIFILES
) lang.install-dvi
3943 test -z
"$(dvidir)/gcc" ||
$(mkinstalldirs
) "$(DESTDIR)$(dvidir)/gcc"
3944 @list
='$(DVIFILES)'; for p in
$$list; do \
3945 if
test -f
"$$p"; then d
=; else d
="$(srcdir)/"; fi
; \
3946 f
=$(dvi__strip_dir
) \
3947 echo
" $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/gcc/$$f'"; \
3948 $(INSTALL_DATA
) "$$d$$p" "$(DESTDIR)$(dvidir)/gcc/$$f"; \
3951 pdf__strip_dir
= `echo $$p | sed -e 's|^.*/||'`;
3953 install-pdf
: $(PDFFILES
) lang.install-pdf
3955 test -z
"$(pdfdir)/gcc" ||
$(mkinstalldirs
) "$(DESTDIR)$(pdfdir)/gcc"
3956 @list
='$(PDFFILES)'; for p in
$$list; do \
3957 if
test -f
"$$p"; then d
=; else d
="$(srcdir)/"; fi
; \
3958 f
=$(pdf__strip_dir
) \
3959 echo
" $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
3960 $(INSTALL_DATA
) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
3963 html__strip_dir
= `echo $$p | sed -e 's|^.*/||'`;
3965 install-html
: $(HTMLS_BUILD
) lang.install-html
3967 test -z
"$(htmldir)" ||
$(mkinstalldirs
) "$(DESTDIR)$(htmldir)"
3968 @list
='$(HTMLS_INSTALL)'; for p in
$$list; do \
3969 if
test -f
"$$p" ||
test -d
"$$p"; then d
=""; else d
="$(srcdir)/"; fi
; \
3970 f
=$(html__strip_dir
) \
3971 if
test -d
"$$d$$p"; then \
3972 echo
" $(mkinstalldirs) '$(DESTDIR)$(htmldir)/$$f'"; \
3973 $(mkinstalldirs
) "$(DESTDIR)$(htmldir)/$$f" || exit
1; \
3974 echo
" $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
3975 $(INSTALL_DATA
) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
3977 echo
" $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
3978 $(INSTALL_DATA
) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
3982 # Install the man pages.
3983 install-man
: lang.install-man \
3984 $(DESTDIR
)$(man1dir)/$(GCC_INSTALL_NAME
)$(man1ext) \
3985 $(DESTDIR
)$(man1dir)/$(CPP_INSTALL_NAME
)$(man1ext) \
3986 $(DESTDIR
)$(man1dir)/$(GCOV_INSTALL_NAME
)$(man1ext) \
3987 $(DESTDIR
)$(man1dir)/$(GCOV_TOOL_INSTALL_NAME
)$(man1ext) \
3988 $(DESTDIR
)$(man1dir)/$(GCOV_DUMP_INSTALL_NAME
)$(man1ext) \
3989 $(if
$(filter yes
,@enable_lto@
),$(DESTDIR
)$(man1dir)/$(LTO_DUMP_INSTALL_NAME
)$(man1ext)) \
3990 $(DESTDIR
)$(man7dir)/fsf-funding
$(man7ext) \
3991 $(DESTDIR
)$(man7dir)/gfdl
$(man7ext) \
3992 $(DESTDIR
)$(man7dir)/gpl
$(man7ext)
3994 $(DESTDIR
)$(man7dir)/%$(man7ext): doc
/%.7 installdirs
3996 -$(INSTALL_DATA
) $< $@
3999 $(DESTDIR
)$(man1dir)/$(GCC_INSTALL_NAME
)$(man1ext): doc
/gcc
.1 installdirs
4001 -$(INSTALL_DATA
) $< $@
4004 $(DESTDIR
)$(man1dir)/$(CPP_INSTALL_NAME
)$(man1ext): doc
/cpp.1 installdirs
4006 -$(INSTALL_DATA
) $< $@
4009 $(DESTDIR
)$(man1dir)/$(GCOV_INSTALL_NAME
)$(man1ext): doc
/gcov
.1 installdirs
4011 -$(INSTALL_DATA
) $< $@
4014 $(DESTDIR
)$(man1dir)/$(GCOV_TOOL_INSTALL_NAME
)$(man1ext): doc
/gcov-tool
.1 installdirs
4016 -$(INSTALL_DATA
) $< $@
4019 $(DESTDIR
)$(man1dir)/$(GCOV_DUMP_INSTALL_NAME
)$(man1ext): doc
/gcov-dump
.1 installdirs
4021 -$(INSTALL_DATA
) $< $@
4024 $(DESTDIR
)$(man1dir)/$(LTO_DUMP_INSTALL_NAME
)$(man1ext): doc
/lto-dump
.1 installdirs
4026 -$(INSTALL_DATA
) $< $@
4029 # Install all the header files built in the include subdirectory.
4030 install-headers
: $(INSTALL_HEADERS_DIR
)
4031 # Fix symlinks to absolute paths in the installed include directory to
4032 # point to the installed directory, not the build directory.
4033 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
4034 -files
=`cd $(DESTDIR)$(libsubdir)/include-fixed; find . -type l -print 2>/dev/null`; \
4035 if
[ $$?
-eq
0 ]; then \
4036 dir=`cd include-fixed; ${PWD_COMMAND}`; \
4037 for i in
$$files; do \
4038 dest
=`ls -ld $(DESTDIR)$(libsubdir)/include-fixed/$$i | sed -n 's/.*-> //p'`; \
4039 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
4040 rm -f
$(DESTDIR
)$(libsubdir
)/include-fixed
/$$i; \
4041 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR
)$(libsubdir
)/include-fixed
/$$i; \
4046 # Create or recreate the gcc private include file directory.
4047 install-include-dir
: installdirs
4048 $(mkinstalldirs
) $(DESTDIR
)$(libsubdir
)/include
4049 -rm -rf
$(DESTDIR
)$(libsubdir
)/include-fixed
4050 mkdir
$(DESTDIR
)$(libsubdir
)/include-fixed
4051 -chmod a
+rx
$(DESTDIR
)$(libsubdir
)/include-fixed
4053 # Create or recreate the install-tools include file directory.
4054 itoolsdir
= $(libexecsubdir
)/install-tools
4055 itoolsdatadir
= $(libsubdir
)/install-tools
4056 install-itoolsdirs
: installdirs
4057 $(mkinstalldirs
) $(DESTDIR
)$(itoolsdatadir
)/include
4058 $(mkinstalldirs
) $(DESTDIR
)$(itoolsdir
)
4060 # Install the include directory using tar.
4061 install-headers-tar
: stmp-int-hdrs install-include-dir
4062 # We use `pwd`/include instead of just include to problems with CDPATH
4063 # Unless a full pathname is provided, some shells would print the new CWD,
4064 # found in CDPATH, corrupting the output. We could just redirect the
4065 # output of `cd', but some shells lose on redirection within `()'s
4066 (cd
`${PWD_COMMAND}`/include ; \
4067 tar -cf
- .
; exit
0) |
(cd
$(DESTDIR
)$(libsubdir
)/include; tar xpf
- )
4068 (cd
`${PWD_COMMAND}`/include-fixed
; \
4069 tar -cf
- .
; exit
0) |
(cd
$(DESTDIR
)$(libsubdir
)/include-fixed
; tar xpf
- )
4070 # /bin/sh on some systems returns the status of the first tar,
4071 # and that can lose with GNU tar which always writes a full block.
4072 # So use `exit 0' to ignore its exit status.
4074 # Install the include directory using cpio.
4075 install-headers-cpio
: stmp-int-hdrs install-include-dir
4076 # See discussion about the use of `pwd` above
4077 cd
`${PWD_COMMAND}`/include ; \
4078 find .
-print | cpio
-pdum
$(DESTDIR
)$(libsubdir
)/include
4079 cd
`${PWD_COMMAND}`/include-fixed
; \
4080 find .
-print | cpio
-pdum
$(DESTDIR
)$(libsubdir
)/include-fixed
4082 # Install the include directory using cp.
4083 install-headers-cp
: stmp-int-hdrs install-include-dir
4084 cp
-p
-r
include $(DESTDIR
)$(libsubdir
)
4085 cp
-p
-r include-fixed
$(DESTDIR
)$(libsubdir
)
4087 # Targets without dependencies, for use in prev-gcc during bootstrap.
4088 real-install-headers-tar
:
4089 (cd
`${PWD_COMMAND}`/include-fixed
; \
4090 tar -cf
- .
; exit
0) |
(cd
$(DESTDIR
)$(libsubdir
)/include-fixed
; tar xpf
- )
4092 real-install-headers-cpio
:
4093 cd
`${PWD_COMMAND}`/include-fixed
; \
4094 find .
-print | cpio
-pdum
$(DESTDIR
)$(libsubdir
)/include-fixed
4096 real-install-headers-cp
:
4097 cp
-p
-r include-fixed
$(DESTDIR
)$(libsubdir
)
4099 # Install supporting files for fixincludes to be run later.
4100 install-mkheaders
: stmp-int-hdrs install-itoolsdirs \
4101 macro_list fixinc_list
4102 $(INSTALL_DATA
) $(srcdir)/gsyslimits.h \
4103 $(DESTDIR
)$(itoolsdatadir
)/gsyslimits.h
4104 $(INSTALL_DATA
) macro_list
$(DESTDIR
)$(itoolsdatadir
)/macro_list
4105 $(INSTALL_DATA
) fixinc_list
$(DESTDIR
)$(itoolsdatadir
)/fixinc_list
4106 set
-e
; for ml in
`cat fixinc_list`; do \
4107 multi_dir
=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
4108 $(mkinstalldirs
) $(DESTDIR
)$(itoolsdatadir
)/include$${multi_dir}; \
4109 $(INSTALL_DATA
) include$${multi_dir}/limits.h
$(DESTDIR
)$(itoolsdatadir
)/include$${multi_dir}/limits.h
; \
4111 $(INSTALL_SCRIPT
) $(srcdir)/..
/mkinstalldirs \
4112 $(DESTDIR
)$(itoolsdir
)/mkinstalldirs
; \
4113 sysroot_headers_suffix
='$${sysroot_headers_suffix}'; \
4114 echo
'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
4115 > $(DESTDIR
)$(itoolsdatadir
)/mkheaders.conf
4116 echo
'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \
4117 >> $(DESTDIR
)$(itoolsdatadir
)/mkheaders.conf
4118 echo
'STMP_FIXINC="$(STMP_FIXINC)"' \
4119 >> $(DESTDIR
)$(itoolsdatadir
)/mkheaders.conf
4121 # Use this target to install the program `collect2' under the name `collect2'.
4122 install-collect2
: collect2
installdirs
4123 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(DESTDIR
)$(libexecsubdir
)/collect2
$(exeext
)
4124 # Install the driver program as $(libsubdir)/gcc for collect2.
4125 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(DESTDIR
)$(libexecsubdir
)/gcc
$(exeext
)
4127 # Install lto-wrapper.
4128 install-lto-wrapper
: lto-wrapper
$(exeext
)
4129 $(INSTALL_PROGRAM
) lto-wrapper
$(exeext
) $(DESTDIR
)$(libexecsubdir
)/lto-wrapper
$(exeext
)
4131 install-gcc-ar
: installdirs gcc-ar
$(exeext
) gcc-nm
$(exeext
) gcc-ranlib
$(exeext
)
4132 if
test "$(enable_as_accelerator)" != "yes" ; then \
4133 for i in gcc-ar gcc-nm gcc-ranlib
; do \
4134 install_name
=`echo $$i|sed '$(program_transform_name)'` ;\
4135 target_install_name
=$(target_noncanonical
)-`echo $$i|sed '$(program_transform_name)'` ; \
4136 rm -f
$(DESTDIR
)$(bindir)/$$install_name$(exeext
) ; \
4137 $(INSTALL_PROGRAM
) $$i$(exeext
) $(DESTDIR
)$(bindir)/$$install_name$(exeext
) ;\
4138 if
test -f gcc-cross
$(exeext
); then \
4141 rm -f
$(DESTDIR
)$(bindir)/$$target_install_name$(exeext
); \
4142 ( cd
$(DESTDIR
)$(bindir) && \
4143 $(LN
) $$install_name$(exeext
) $$target_install_name$(exeext
) ) ; \
4148 # Cancel installation by deleting the installed files.
4149 uninstall: lang.
uninstall
4150 -rm -rf
$(DESTDIR
)$(libsubdir
)
4151 -rm -rf
$(DESTDIR
)$(libexecsubdir
)
4152 -rm -rf
$(DESTDIR
)$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
4153 -rm -f
$(DESTDIR
)$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
4154 -if
[ x
$(cpp_install_dir
) != x
]; then \
4155 rm -f
$(DESTDIR
)$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
4157 -rm -rf
$(DESTDIR
)$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
4158 -rm -rf
$(DESTDIR
)$(man1dir)/$(GCC_INSTALL_NAME
)$(man1ext)
4159 -rm -rf
$(DESTDIR
)$(man1dir)/cpp$(man1ext)
4160 -rm -f
$(DESTDIR
)$(infodir)/cpp.
info* $(DESTDIR
)$(infodir)/gcc.
info*
4161 -rm -f
$(DESTDIR
)$(infodir)/cppinternals.
info* $(DESTDIR
)$(infodir)/gccint.
info*
4162 for i in
ar nm ranlib
; do \
4163 install_name
=`echo gcc-$$i|sed '$(program_transform_name)'`$(exeext
) ;\
4164 target_install_name
=$(target_noncanonical
)-`echo gcc-$$i|sed '$(program_transform_name)'`$(exeext
) ; \
4165 rm -f
$(DESTDIR
)$(bindir)/$$install_name ; \
4166 rm -f
$(DESTDIR
)$(bindir)/$$target_install_name ; \
4169 # These targets are for the dejagnu testsuites. The file site.exp
4170 # contains global variables that all the testsuites will use.
4172 target_subdir
= @target_subdir@
4174 site.exp
: .
/config.status Makefile
4175 @echo
"Making a new config file..."
4178 -@mv site.exp site.bak
4179 @echo
"## these variables are automatically generated by make ##" > .
/site.tmp
4180 @echo
"# Do not edit here. If you wish to override these values" >> .
/site.tmp
4181 @echo
"# add them to the last section" >> .
/site.tmp
4182 @echo
"set rootme \"`${PWD_COMMAND}`\"" >> .
/site.tmp
4183 @echo
"set srcdir \"`cd ${srcdir}; ${PWD_COMMAND}`\"" >> .
/site.tmp
4184 @echo
"set host_triplet $(host)" >> .
/site.tmp
4185 @echo
"set build_triplet $(build)" >> .
/site.tmp
4186 @echo
"set target_triplet $(target)" >> .
/site.tmp
4187 @echo
"set target_alias $(target_noncanonical)" >> .
/site.tmp
4188 @echo
"set libiconv \"$(LIBICONV)\"" >> .
/site.tmp
4189 # CFLAGS is set even though it's empty to show we reserve the right to set it.
4190 @echo
"set CFLAGS \"\"" >> .
/site.tmp
4191 @echo
"set CXXFLAGS \"\"" >> .
/site.tmp
4192 @echo
"set HOSTCC \"$(CC)\"" >> .
/site.tmp
4193 @echo
"set HOSTCXX \"$(CXX)\"" >> .
/site.tmp
4194 @echo
"set HOSTCFLAGS \"$(CFLAGS)\"" >> .
/site.tmp
4195 @echo
"set HOSTCXXFLAGS \"$(CXXFLAGS)\"" >> .
/site.tmp
4196 # TEST_ALWAYS_FLAGS are flags that should be passed to every compilation.
4197 # They are passed first to allow individual tests to override them.
4198 @echo
"set TEST_ALWAYS_FLAGS \"$(SYSROOT_CFLAGS_FOR_TARGET)\"" >> .
/site.tmp
4199 # When running the tests we set GCC_EXEC_PREFIX to the install tree so that
4200 # files that have already been installed there will be found. The -B option
4201 # overrides it, so use of GCC_EXEC_PREFIX will not result in using GCC files
4202 # from the install tree.
4203 @echo
"set TEST_GCC_EXEC_PREFIX \"$(libdir)/gcc/\"" >> .
/site.tmp
4204 @echo
"set TESTING_IN_BUILD_TREE 1" >> .
/site.tmp
4205 @echo
"set HAVE_LIBSTDCXX_V3 1" >> .
/site.tmp
4206 @if
test "@enable_plugin@" = "yes" ; then \
4207 echo
"set ENABLE_PLUGIN 1" >> .
/site.tmp
; \
4208 echo
"set PLUGINCC \"$(PLUGINCC)\"" >> .
/site.tmp
; \
4209 echo
"set PLUGINCFLAGS \"$(PLUGINCFLAGS)\"" >> .
/site.tmp
; \
4210 echo
"set GMPINC \"$(GMPINC)\"" >> .
/site.tmp
; \
4212 # If newlib has been configured, we need to pass -B to gcc so it can find
4213 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
4214 # message if it doesn't, but the testsuite is supposed to ignore the message -
4215 # it's too difficult to tell when to and when not to pass -B (not all targets
4216 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
4217 # seems like too selective a test.
4218 # ??? Another way to solve this might be to rely on linker scripts. Then
4219 # theoretically the -B won't be needed.
4220 # We also need to pass -L ../ld so that the linker can find ldscripts.
4221 @if
[ -d
$(objdir
)/..
/$(target_subdir
)/newlib
] \
4222 && [ "${host}" != "${target}" ]; then \
4223 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)/newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/site.tmp
; \
4224 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)/newlib/\"" >> .
/site.tmp
; \
4225 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/site.tmp
; \
4226 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/site.tmp
; \
4227 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/site.tmp
; \
4230 @if
[ -d
$(objdir
)/..
/ld ] ; then \
4231 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/site.tmp
; \
4234 echo
"set tmpdir $(objdir)/testsuite" >> .
/site.tmp
4235 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/site.tmp
4236 @if
[ "X$(ALT_CC_UNDER_TEST)" != "X" ] ; then \
4237 echo
"set ALT_CC_UNDER_TEST \"$(ALT_CC_UNDER_TEST)\"" >> .
/site.tmp
; \
4240 @if
[ "X$(ALT_CXX_UNDER_TEST)" != "X" ] ; then \
4241 echo
"set ALT_CXX_UNDER_TEST \"$(ALT_CXX_UNDER_TEST)\"" >> .
/site.tmp
; \
4244 @if
[ "X$(COMPAT_OPTIONS)" != "X" ] ; then \
4245 echo
"set COMPAT_OPTIONS \"$(COMPAT_OPTIONS)\"" >> .
/site.tmp
; \
4248 @if
test "x@enable_darwin_at_rpath@" = "xyes" ; then \
4249 echo
"set ENABLE_DARWIN_AT_RPATH 1" >> .
/site.tmp
; \
4251 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/site.tmp
4252 @cat .
/site.tmp
> site.exp
4253 @cat site.bak | sed \
4254 -e
'1,/^## All variables above are.*##/ d' >> site.exp
4257 CHECK_TARGETS
= @check_languages@
4259 check: $(CHECK_TARGETS
)
4261 check-subtargets
: $(patsubst %,%-subtargets
,$(CHECK_TARGETS
))
4263 # The idea is to parallelize testing of multilibs, for example:
4264 # make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
4265 # will run 3 concurrent sessions of check-gcc, eventually testing
4266 # all 10 combinations. GNU make is required, as is a shell that expands
4267 # alternations within braces.
4268 lang_checks_parallel
= $(lang_checks
:=//%)
4269 $(lang_checks_parallel
): site.exp
4270 target
=`echo "$@" | sed 's,//.*,,'`; \
4271 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
4272 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
4273 $(MAKE
) TESTSUITEDIR
="testsuite.$$vardots" \
4274 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
4277 TESTSUITEDIR
= testsuite
4279 $(TESTSUITEDIR
)/site.exp
: site.exp
4280 -test -d
$(TESTSUITEDIR
) || mkdir
$(TESTSUITEDIR
)
4282 sed
'/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)|' < site.exp
> $@
4284 # This is only used for check-% targets that aren't parallelized.
4285 $(filter-out $(lang_checks_parallelized
),$(lang_checks
)): check-
% : site.exp
4286 -test -d plugin || mkdir plugin
4287 -test -d
$(TESTSUITEDIR
) || mkdir
$(TESTSUITEDIR
)
4288 test -d
$(TESTSUITEDIR
)/$* || mkdir
$(TESTSUITEDIR
)/$*
4289 -(rootme
=`${PWD_COMMAND}`; export rootme
; \
4290 srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
4291 cd
$(TESTSUITEDIR
)/$*; \
4292 rm -f tmp-site.exp
; \
4293 sed
'/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$*|' \
4294 < ..
/..
/site.exp
> tmp-site.exp
; \
4295 $(SHELL
) $${srcdir}/..
/move-if-change tmp-site.exp site.exp
; \
4296 EXPECT
=${EXPECT} ; export EXPECT
; \
4297 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
4298 TCL_LIBRARY
=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
4299 export TCL_LIBRARY
; fi
; \
4300 $(RUNTEST
) --tool
$* $(RUNTESTFLAGS
))
4302 $(patsubst %,%-subtargets
,$(lang_checks
)): check-
%-subtargets
:
4305 check_p_tool
=$(firstword $(subst _
, ,$*))
4306 check_p_count
=$(check_
$(check_p_tool
)_parallelize
)
4307 check_p_subno
=$(word 2,$(subst _
, ,$*))
4308 check_p_subdir
=$(subst _
,,$*)
4309 check_p_subdirs
=$(wordlist
1,$(check_p_count
),$(wordlist
1, \
4310 $(if
$(GCC_TEST_PARALLEL_SLOTS
),$(GCC_TEST_PARALLEL_SLOTS
),128), \
4313 # For parallelized check-% targets, this decides whether parallelization
4314 # is desirable (if -jN is used). If desirable, recursive make is run with
4315 # check-parallel-$lang{,1,2,3,4,5} etc. goals, which can be executed in
4316 # parallel, as they are run in separate directories.
4317 # check-parallel-$lang{,1,2,3,4,5} etc. goals invoke runtest with
4318 # GCC_RUNTEST_PARALLELIZE_DIR var in the environment and runtest_file_p
4319 # dejaGNU procedure is overridden to additionally synchronize through
4320 # a $lang-parallel directory which tests will be run by which runtest instance.
4321 # Afterwards contrib/dg-extract-results.sh is used to merge the sum and log
4322 # files. If parallelization isn't desirable, only one recursive make
4323 # is run with check-parallel-$lang goal and check_$lang_parallelize variable
4324 # cleared to say that no additional arguments beyond $(RUNTESTFLAGS)
4325 # should be passed to runtest.
4327 # To parallelize some language check, add the corresponding check-$lang
4328 # to lang_checks_parallelized variable and define check_$lang_parallelize
4329 # variable. This is the upper limit to which it is useful to parallelize the
4330 # check-$lang target. It doesn't make sense to try e.g. 128 goals for small
4331 # testsuites like objc or go.
4332 $(lang_checks_parallelized
): check-
% : site.exp
4333 -rm -rf
$(TESTSUITEDIR
)/$*-parallel
4334 @if
[ -n
"$(filter -j%, $(MFLAGS))" ]; then \
4335 test -d
$(TESTSUITEDIR
) || mkdir
$(TESTSUITEDIR
) || true
; \
4336 test -d
$(TESTSUITEDIR
)/$*-parallel || mkdir
$(TESTSUITEDIR
)/$*-parallel || true
; \
4337 GCC_RUNTEST_PARALLELIZE_DIR
=`${PWD_COMMAND}`/$(TESTSUITEDIR
)/$(check_p_tool
)-parallel
; \
4338 export GCC_RUNTEST_PARALLELIZE_DIR
; \
4339 $(MAKE
) TESTSUITEDIR
="$(TESTSUITEDIR)" RUNTESTFLAGS
="$(RUNTESTFLAGS)" \
4341 $(patsubst %,check-parallel-
$*_
%, $(check_p_subdirs
)); \
4343 for
dir in
$(TESTSUITEDIR
)/$* \
4344 $(patsubst %,$(TESTSUITEDIR
)/$*%,$(check_p_subdirs
));\
4346 if
[ -d
$$dir ]; then \
4347 mv
-f
$$dir/$*.sum
$$dir/$*.sum.sep
; mv
-f
$$dir/$*.log
$$dir/$*.log.sep
; \
4348 sums
="$$sums $$dir/$*.sum.sep"; logs
="$$logs $$dir/$*.log.sep"; \
4351 $(SHELL
) $(srcdir)/..
/contrib
/dg-extract-results.sh
$$sums \
4352 > $(TESTSUITEDIR
)/$*/$*.sum
; \
4353 $(SHELL
) $(srcdir)/..
/contrib
/dg-extract-results.sh
-L
$$logs \
4354 > $(TESTSUITEDIR
)/$*/$*.log
; \
4355 rm -rf
$(TESTSUITEDIR
)/$*-parallel || true
; \
4357 $(MAKE
) TESTSUITEDIR
="$(TESTSUITEDIR)" RUNTESTFLAGS
="$(RUNTESTFLAGS)" \
4358 check_
$*_parallelize
= check-parallel-
$*; \
4361 check-parallel-
% : site.exp
4362 -@
test -d plugin || mkdir plugin
4363 -@
test -d
$(TESTSUITEDIR
) || mkdir
$(TESTSUITEDIR
)
4364 @
test -d
$(TESTSUITEDIR
)/$(check_p_subdir
) || mkdir
$(TESTSUITEDIR
)/$(check_p_subdir
)
4365 -$(if
$(check_p_subno
),@
)(rootme
=`${PWD_COMMAND}`; export rootme
; \
4366 srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
4367 if
[ -n
"$(check_p_subno)" ] \
4368 && [ -n
"$$GCC_RUNTEST_PARALLELIZE_DIR" ] \
4369 && [ -f
$(TESTSUITEDIR
)/$(check_p_tool
)-parallel
/finished
]; then \
4370 rm -rf
$(TESTSUITEDIR
)/$(check_p_subdir
); \
4372 cd
$(TESTSUITEDIR
)/$(check_p_subdir
); \
4373 rm -f tmp-site.exp
; \
4374 sed
'/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$(check_p_subdir)|' \
4375 < ..
/..
/site.exp
> tmp-site.exp
; \
4376 $(SHELL
) $${srcdir}/..
/move-if-change tmp-site.exp site.exp
; \
4377 EXPECT
=${EXPECT} ; export EXPECT
; \
4378 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
4379 TCL_LIBRARY
=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
4380 export TCL_LIBRARY
; \
4382 $(RUNTEST
) --tool
$(check_p_tool
) $(RUNTESTFLAGS
); \
4383 if
[ -n
"$$GCC_RUNTEST_PARALLELIZE_DIR" ] ; then \
4384 touch
$${rootme}/$(TESTSUITEDIR
)/$(check_p_tool
)-parallel
/finished
; \
4390 # The path to qmtest.
4393 # The flags to pass to qmtest.
4396 # The flags to pass to "qmtest run".
4397 QMTESTRUNFLAGS
=-f none
--result-stream dejagnu_stream.DejaGNUStream
4399 # The command to use to invoke qmtest.
4400 QMTEST
=${QMTEST_PATH} ${QMTESTFLAGS}
4402 # The tests (or suites) to run.
4403 QMTEST_GPP_TESTS
=g
++
4405 # The subdirectory of the OBJDIR that will be used to store the QMTest
4406 # test database configuration and that will be used for temporary
4407 # scratch space during QMTest's execution.
4408 QMTEST_DIR
=qmtestsuite
4410 # Create the QMTest database configuration.
4411 ${QMTEST_DIR} stamp-qmtest
:
4412 ${QMTEST} -D
${QMTEST_DIR} create-tdb \
4413 -c gcc_database.GCCDatabase \
4414 -a
srcdir=`cd ${srcdir}/testsuite && ${PWD_COMMAND}` && \
4415 $(STAMP
) stamp-qmtest
4417 # Create the QMTest context file.
4418 ${QMTEST_DIR}/context
: stamp-qmtest
4420 echo
"CompilerTable.languages=c cplusplus" >> $@
4421 echo
"CompilerTable.c_kind=GCC" >> $@
4422 echo
"CompilerTable.c_path=${objdir}/xgcc" >> $@
4423 echo
"CompilerTable.c_options=-B${objdir}/" >> $@
4424 echo
"CompilerTable.cplusplus_kind=GCC" >> $@
4425 echo
"CompilerTable.cplusplus_path=${objdir}/xg++" >> $@
4426 echo
"CompilerTable.cplusplus_options=-B${objdir}/" >> $@
4427 echo
"DejaGNUTest.target=${target_noncanonical}" >> $@
4429 # Run the G++ testsuite using QMTest.
4430 qmtest-g
++: ${QMTEST_DIR}/context
4431 cd
${QMTEST_DIR} && ${QMTEST} run
${QMTESTRUNFLAGS} -C context \
4432 -o g
++.qmr
${QMTEST_GPP_TESTS}
4434 # Use the QMTest GUI.
4435 qmtest-gui
: ${QMTEST_DIR}/context
4436 cd
${QMTEST_DIR} && ${QMTEST} gui
-C context
4440 # Run Paranoia on real.cc.
4442 paranoia.o
: $(srcdir)/..
/contrib
/paranoia.
cc $(CONFIG_H
) $(SYSTEM_H
) $(TREE_H
)
4443 g
++ -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $< $(OUTPUT_OPTION
)
4445 paranoia
: paranoia.o real.o
$(LIBIBERTY
)
4446 g
++ -o
$@ paranoia.o real.o
$(LIBIBERTY
)
4448 # These exist for maintenance purposes.
4454 # Update the tags table.
4458 list
='$(SUBDIRS)'; for
dir in
$$list; do \
4459 if
test -f
$$dir/TAGS
; then \
4460 incs
="$$incs --include $$dir/TAGS.sub"; \
4463 $(ETAGS
) -o TAGS.sub c-family
/*.h c-family
/*.
cc \
4465 ..
/include/*.h ..
/libiberty
/*.c \
4466 ..
/libcpp
/*.
cc ..
/libcpp
/include/*.h \
4467 --language
=none
--regex
="/\(char\|unsigned int\|int\|bool\|void\|HOST_WIDE_INT\|enum [A-Za-z_0-9]+\) [*]?\([A-Za-z_0-9]+\)/\2/" common.opt \
4468 --language
=none
--regex
="/\(DEF_RTL_EXPR\|DEFTREECODE\|DEFGSCODE\|DEFTIMEVAR\|DEFPARAM\|DEFPARAMENUM5\)[ ]?(\([A-Za-z_0-9]+\)/\2/" rtl.def tree.def gimple.def timevar.def \
4470 $(ETAGS
) --include TAGS.sub
$$incs)
4472 # -----------------------------------------------------
4473 # Rules for generating translated message descriptions.
4474 # Disabled by autoconf if the tools are not available.
4475 # -----------------------------------------------------
4477 XGETTEXT
= @XGETTEXT@
4480 CATALOGS
= $(patsubst %,po
/%,@CATALOGS@
)
4482 .PHONY
: build- install- build-po install-po update-po
4484 # Dummy rules to deal with dependencies produced by use of
4485 # "build-@POSUB@" and "install-@POSUB@" above, when NLS is disabled.
4489 build-po
: $(CATALOGS
)
4491 # This notation should be acceptable to all Make implementations used
4492 # by people who are interested in updating .po files.
4493 update-po
: $(CATALOGS
:.gmo
=.pox
)
4495 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
4499 $(GMSGFMT
) --statistics
-o
$@
$<
4501 # The new .po has to be gone over by hand, so we deposit it into
4502 # build/po with a different extension.
4503 # If build/po/gcc.pot exists, use it (it was just created),
4504 # else use the one in srcdir.
4507 $(MSGMERGE
) $< `if test -f po/gcc.pot; \
4508 then echo po/gcc.pot; \
4509 else echo $(srcdir)/po/gcc.pot; fi` -o
$@
4511 # This rule has to look for .gmo modules in both srcdir and
4512 # the cwd, and has to check that we actually have a catalog
4513 # for each language, in case they weren't built or included
4514 # with the distribution.
4516 $(mkinstalldirs
) $(DESTDIR
)$(datadir)
4517 cats
="$(CATALOGS)"; for cat in
$$cats; do \
4518 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
4519 if
[ -f
$$cat ]; then
:; \
4520 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
4523 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
4524 echo
$(mkinstalldirs
) $(DESTDIR
)$$dir; \
4525 $(mkinstalldirs
) $(DESTDIR
)$$dir || exit
1; \
4526 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/gcc.mo
; \
4527 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/gcc.mo
; \
4530 # Rule for regenerating the message template (gcc.pot).
4531 # Instead of forcing everyone to edit POTFILES.in, which proved impractical,
4532 # this rule has no dependencies and always regenerates gcc.pot. This is
4533 # relatively harmless since the .po files do not directly depend on it.
4534 # Note that exgettext has an awk script embedded in it which requires a
4535 # fairly modern (POSIX-compliant) awk.
4536 # The .pot file is left in the build directory.
4541 AWK
=$(AWK
) $(SHELL
) $(srcdir)/po
/exgettext \
4542 $(XGETTEXT
) gcc
$(srcdir)
4546 # Dependency information.
4548 # In order for parallel make to really start compiling the expensive
4549 # objects from $(OBJS) as early as possible, build all their
4550 # prerequisites strictly before all objects.
4551 $(ALL_HOST_OBJS
) : |
$(generated_files
)
4553 # Include the auto-generated dependencies for all host objects.
4555 $(foreach obj
,$(ALL_HOST_OBJS
),\
4556 $(dir $(obj
))$(DEPDIR
)/$(patsubst %.o
,%.Po
,$(notdir $(obj
))))
4557 -include $(DEPFILES
)