include/configs/imx8mq_phanbell.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 NXP
   4  */
   5
   6 #ifndef __IMX8M_PHANBELL_H
   7 #define __IMX8M_PHANBELL_H
   8
   9 #include <linux/sizes.h>
  10 #include <asm/arch/imx-regs.h>
  11
  12 #define CONFIG_SPL_MAX_SIZE             (172 * 1024)
  13 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  14 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
  19 #define CONFIG_SPL_WATCHDOG
  20 #define CONFIG_SPL_DRIVERS_MISC
  21 #define CONFIG_SPL_POWER
  22 #define CONFIG_SPL_I2C_SUPPORT
  23 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  24 #define CONFIG_SPL_STACK                0x187FF0
  25 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  26 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  27 #define CONFIG_SPL_GPIO
  28 #define CONFIG_SPL_MMC_SUPPORT
  29 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
  30 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000   /* 8 KB */
  31 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
  32 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
  33 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  34
  35 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  36 #define CONFIG_MALLOC_F_ADDR            0x182000
  37 /* For RAW image gives a error info not panic */
  38 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  39
  40 #undef CONFIG_DM_MMC
  41 #undef CONFIG_DM_PMIC
  42 #undef CONFIG_DM_PMIC_PFUZE100
  43
  44 #define CONFIG_SYS_I2C_LEGACY
  45 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  46 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  48
  49 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  50
  51 #define CONFIG_POWER
  52 #define CONFIG_POWER_I2C
  53 #endif
  54
  55 #define CONFIG_REMAKE_ELF
  56
  57 /* ENET Config */
  58 /* ENET1 */
  59 #if defined(CONFIG_CMD_NET)
  60 #define CONFIG_MII
  61 #define CONFIG_ETHPRIME                 "FEC"
  62
  63 #define CONFIG_FEC_MXC
  64 #define CONFIG_FEC_XCV_TYPE             RGMII
  65 #define CONFIG_FEC_MXC_PHYADDR          0
  66 #define FEC_QUIRK_ENET_MAC
  67
  68 #define CONFIG_PHY_GIGE
  69 #define IMX_FEC_BASE                    0x30BE0000
  70
  71 #define CONFIG_PHYLIB
  72 #endif
  73
  74 #define CONFIG_MFG_ENV_SETTINGS \
  75         "initrd_addr=0x43800000\0" \
  76         "initrd_high=0xffffffff\0" \
  77
  78 /* Initial environment variables */
  79 #define CONFIG_EXTRA_ENV_SETTINGS               \
  80         CONFIG_MFG_ENV_SETTINGS \
  81         "script=boot.scr\0" \
  82         "image=Image\0" \
  83         "console=ttymxc0,115200\0" \
  84         "fdt_addr=0x43000000\0"                 \
  85         "fdt_high=0xffffffffffffffff\0"         \
  86         "boot_fdt=try\0" \
  87         "fdt_file=imx8mq-phanbell.dtb\0" \
  88         "initrd_addr=0x43800000\0"              \
  89         "initrd_high=0xffffffffffffffff\0" \
  90         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  91         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  92         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  93         "mmcautodetect=yes\0" \
  94         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  95         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  96         "bootscript=echo Running bootscript from mmc ...; " \
  97                 "source\0" \
  98         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  99         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 100         "mmcboot=echo Booting from mmc ...; " \
 101                 "run mmcargs; " \
 102                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 103                         "if run loadfdt; then " \
 104                                 "booti ${loadaddr} - ${fdt_addr}; " \
 105                         "else " \
 106                                 "echo WARN: Cannot load the DT; " \
 107                         "fi; " \
 108                 "else " \
 109                         "echo wait for boot; " \
 110                 "fi;\0" \
 111         "netargs=setenv bootargs console=${console} " \
 112                 "root=/dev/nfs " \
 113                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 114         "netboot=echo Booting from net ...; " \
 115                 "run netargs;  " \
 116                 "if test ${ip_dyn} = yes; then " \
 117                         "setenv get_cmd dhcp; " \
 118                 "else " \
 119                         "setenv get_cmd tftp; " \
 120                 "fi; " \
 121                 "${get_cmd} ${loadaddr} ${image}; " \
 122                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 123                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 124                                 "booti ${loadaddr} - ${fdt_addr}; " \
 125                         "else " \
 126                                 "echo WARN: Cannot load the DT; " \
 127                         "fi; " \
 128                 "else " \
 129                         "booti; " \
 130                 "fi;\0"
 131
 132 #define CONFIG_BOOTCOMMAND \
 133            "mmc dev ${mmcdev}; if mmc rescan; then " \
 134                    "if run loadbootscript; then " \
 135                            "run bootscript; " \
 136                    "else " \
 137                            "if run loadimage; then " \
 138                                    "run mmcboot; " \
 139                            "else run netboot; " \
 140                            "fi; " \
 141                    "fi; " \
 142            "else booti ${loadaddr} - ${fdt_addr}; fi"
 143
 144 /* Link Definitions */
 145 #define CONFIG_LOADADDR                 0x40480000
 146
 147 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 148
 149 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 150 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
 151 #define CONFIG_SYS_INIT_SP_OFFSET \
 152         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 153 #define CONFIG_SYS_INIT_SP_ADDR \
 154         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 155
 156 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 157
 158 /* Size of malloc() pool */
 159 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
 160
 161 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 162 #define PHYS_SDRAM                      0x40000000
 163 #define PHYS_SDRAM_SIZE                 0x40000000 /* 1GB DDR */
 164
 165 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 166 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
 167                                         (PHYS_SDRAM_SIZE >> 1))
 168
 169 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
 170
 171 /* Monitor Command Prompt */
 172 #define CONFIG_SYS_CBSIZE               1024
 173 #define CONFIG_SYS_MAXARGS              64
 174 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 175 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 176                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 177
 178 #define CONFIG_IMX_BOOTAUX
 179
 180 #define CONFIG_SYS_FSL_USDHC_NUM        2
 181 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 182
 183 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 184
 185 #define CONFIG_MXC_GPIO
 186
 187 /* I2C Configs */
 188 #define CONFIG_SYS_I2C_SPEED              100000
 189
 190 #define CONFIG_OF_SYSTEM_SETUP
 191
 192 #ifndef CONFIG_SPL_BUILD
 193 #define CONFIG_DM_PMIC
 194 #endif
 195
 196 #endif