]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/mvebu_armada-8k.h
Convert CONFIG_ARCH_EARLY_INIT_R to Kconfig
[people/ms/u-boot.git] / include / configs / mvebu_armada-8k.h
1 /*
2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
8 #define _CONFIG_MVEBU_ARMADA_8K_H
9
10 /*
11 * High Level Configuration Options (easy to change)
12 */
13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
14
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
16
17 #define CONFIG_SYS_TEXT_BASE 0x00000000
18
19 /* additions for new ARM relocation support */
20 #define CONFIG_SYS_SDRAM_BASE 0x00000000
21
22 #define CONFIG_NR_DRAM_BANKS 1
23
24 /* auto boot */
25 #define CONFIG_PREBOOT
26
27 #define CONFIG_BAUDRATE 115200
28 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
29 115200, 230400, 460800, 921600 }
30
31 /*
32 * For booting Linux, the board info and command line data
33 * have to be in the first 8 MB of memory, since this is
34 * the maximum mapped by the Linux kernel during initialization.
35 */
36 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
37 #define CONFIG_INITRD_TAG /* enable INITRD tag */
38 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
39
40 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
41 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
42 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
43
44 /*
45 * Size of malloc() pool
46 */
47 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
48
49 /*
50 * Other required minimal configurations
51 */
52 #define CONFIG_SYS_LONGHELP
53 #define CONFIG_AUTO_COMPLETE
54 #define CONFIG_CMDLINE_EDITING
55 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
56 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
57 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
58 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
59 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
60 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
61 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
62
63 #define CONFIG_SYS_ALT_MEMTEST
64
65 /* End of 16M scrubbed by training in bootrom */
66 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
67
68 /*
69 * SPI Flash configuration
70 */
71 #define CONFIG_KIRKWOOD_SPI
72 #define CONFIG_ENV_SPI_BUS 0
73 #define CONFIG_ENV_SPI_CS 0
74
75 /* SPI NOR flash default params, used by sf commands */
76 #define CONFIG_SF_DEFAULT_SPEED 1000000
77 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
78 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
79
80 /* Environment in SPI NOR flash */
81 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
82 #define CONFIG_ENV_IS_IN_SPI_FLASH
83 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
84 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
85 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
86
87 /* USB 2.0 */
88 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
89
90 /* USB 3.0 */
91 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
92
93 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
94 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
95
96 /* USB ethernet */
97 #define CONFIG_USB_HOST_ETHER
98 #define CONFIG_USB_ETHER_ASIX
99 #define CONFIG_USB_ETHER_MCS7830
100 #define CONFIG_USB_ETHER_RTL8152
101 #define CONFIG_USB_ETHER_SMSC95XX
102
103 /*
104 * SATA/SCSI/AHCI configuration
105 */
106 #define CONFIG_SCSI
107 #define CONFIG_SCSI_AHCI
108 #define CONFIG_SCSI_AHCI_PLAT
109 #define CONFIG_LIBATA
110 #define CONFIG_LBA48
111 #define CONFIG_SYS_64BIT_LBA
112
113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
114 #define CONFIG_SYS_SCSI_MAX_LUN 1
115 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
116 CONFIG_SYS_SCSI_MAX_LUN)
117
118 #define CONFIG_SUPPORT_VFAT
119
120 /* DISK Partition support */
121 #define CONFIG_EFI_PARTITION
122 #define CONFIG_DOS_PARTITION
123 #define CONFIG_MAC_PARTITION
124 #define CONFIG_ISO_PARTITION /* Experimental */
125
126 #define CONFIG_CMD_PART
127 #define CONFIG_PARTITION_UUIDS
128
129 /*
130 * PCI configuration
131 */
132 #ifdef CONFIG_PCIE_DW_MVEBU
133 #define CONFIG_E1000
134 #define CONFIG_CMD_PCI
135 #endif
136
137 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */