include/configs/mvebu_armada-8k.h

   1 /*
   2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
   8 #define _CONFIG_MVEBU_ARMADA_8K_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  14
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16
  17 /* additions for new ARM relocation support */
  18 #define CONFIG_SYS_SDRAM_BASE   0x00000000
  19
  20 #define CONFIG_NR_DRAM_BANKS    1
  21
  22 /* auto boot */
  23 #define CONFIG_PREBOOT
  24
  25 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, \
  26                                           115200, 230400, 460800, 921600 }
  27
  28 /*
  29  * For booting Linux, the board info and command line data
  30  * have to be in the first 8 MB of memory, since this is
  31  * the maximum mapped by the Linux kernel during initialization.
  32  */
  33 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
  34 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
  35 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
  36
  37 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
  38
  39 /*
  40  * Size of malloc() pool
  41  */
  42 #define CONFIG_SYS_MALLOC_LEN   (4 << 20) /* 4MiB for malloc() */
  43
  44 /*
  45  * Other required minimal configurations
  46  */
  47 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
  48 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  49 #define CONFIG_SYS_MEMTEST_START 0x00800000     /* 8M */
  50 #define CONFIG_SYS_MEMTEST_END  0x00ffffff      /*(_16M -1) */
  51 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
  52 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
  53
  54 #define CONFIG_SYS_ALT_MEMTEST
  55
  56 /* End of 16M scrubbed by training in bootrom */
  57 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
  58
  59 /*
  60  * SPI Flash configuration
  61  */
  62 #define CONFIG_ENV_SPI_BUS              0
  63 #define CONFIG_ENV_SPI_CS               0
  64
  65 /* SPI NOR flash default params, used by sf commands */
  66 #define CONFIG_SF_DEFAULT_SPEED         1000000
  67 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  68 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  69
  70 #define CONFIG_ENV_OFFSET               0x180000 /* as Marvell U-Boot version */
  71 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  72 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  73
  74 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  75 #define CONFIG_SYS_NAND_MAX_CHIPS       1
  76 #define CONFIG_SYS_NAND_ONFI_DETECTION
  77 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  78
  79 /*
  80  * Ethernet Driver configuration
  81  */
  82 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
  83 #define CONFIG_ARP_TIMEOUT      200
  84 #define CONFIG_NET_RETRY_COUNT  50
  85
  86 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
  87
  88 /* USB ethernet */
  89
  90 /*
  91  * SATA/SCSI/AHCI configuration
  92  */
  93 #define CONFIG_SCSI_AHCI_PLAT
  94 #define CONFIG_LBA48
  95 #define CONFIG_SYS_64BIT_LBA
  96
  97 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  98 #define CONFIG_SYS_SCSI_MAX_LUN         1
  99 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 100                                          CONFIG_SYS_SCSI_MAX_LUN)
 101
 102 /*
 103  * PCI configuration
 104  */
 105 #ifdef CONFIG_PCIE_DW_MVEBU
 106 #define CONFIG_E1000
 107 #endif
 108
 109 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */