makevms.com

   1 $!
   2 $! MAKEVMS.COM
   3 $! Original Author:  UNKNOWN
   4 $! Rewritten By:  Robert Byer
   5 $!                Vice-President
   6 $!                A-Com Computing, Inc.
   7 $!                byer@mail.all-net.net
   8 $!
   9 $! Changes by Richard Levitte <richard@levitte.org>
  10 $!            Zoltan Arpadffy <zoli@polarhome.com>
  11 $!
  12 $! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
  13 $! "[.xxx.EXE.SSL]LIBSSL.OLB"
  14 $! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
  15 $!
  16 $! This procedures accepts two command line options listed below.
  17 $!
  18 $! P1 specifies one of the following build options:
  19 $!
  20 $!      ALL       Just build "everything".
  21 $!      CONFIG    Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
  22 $!      BUILDINF  Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
  23 $!      SOFTLINKS Just fix the Unix soft links.
  24 $!      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
  25 $!      CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
  26 $!      CRYPTO/x  Just build the x part of the
  27 $!                "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
  28 $!      SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
  29 $!      SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
  30 $!      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
  31 $!      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
  32 $!      ENGINES   Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
  33 $!
  34 $! P2, if defined, specifies the C pointer size.  Ignored on VAX.
  35 $!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
  36 $!      Supported values are:
  37 $!
  38 $!      ""       Compile with default (/NOPOINTER_SIZE).
  39 $!      32       Compile with /POINTER_SIZE=32 (SHORT).
  40 $!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
  41 $!               (Automatically select ARGV if compiler supports it.)
  42 $!      64=      Compile with /POINTER_SIZE=64 (LONG).
  43 $!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
  44 $!
  45 $! P3 specifies DEBUG or NODEBUG, to compile with or without debugging
  46 $!    information.
  47 $!
  48 $! P4 specifies which compiler to try to compile under.
  49 $!
  50 $!        VAXC   For VAX C.
  51 $!        DECC   For DEC C.
  52 $!        GNUC   For GNU C.
  53 $!        LINK   To only link the programs from existing object files.
  54 $!               (not yet implemented)
  55 $!
  56 $! If you don't specify a compiler, it will try to determine which
  57 $! "C" compiler to use.
  58 $!
  59 $! P5, if defined, sets a TCP/IP library to use, through one of the following
  60 $! keywords:
  61 $!
  62 $!      UCX             for UCX or UCX emulation
  63 $!      TCPIP           for TCP/IP Services or TCP/IP Services emulation
  64 $!                      (this is prefered over UCX)
  65 $!      SOCKETSHR       for SOCKETSHR+NETLIB
  66 $!      NONE            to avoid specifying which TCP/IP implementation to
  67 $!                      use at build time (this works with DEC C).  This is
  68 $!                      the default.
  69 $!
  70 $! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up).
  71 $!
  72 $! P7, if defined, specifies a directory where ZLIB files (zlib.h,
  73 $! libz.olb) may be found.  Optionally, a non-default object library
  74 $! name may be included ("dev:[dir]libz_64.olb", for example).
  75 $!
  76 $!
  77 $! Announce/identify.
  78 $!
  79 $ proc = f$environment( "procedure")
  80 $ write sys$output "@@@ "+ -
  81    f$parse( proc, , , "name")+ f$parse( proc, , , "type")
  82 $!
  83 $ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
  84 $ ON ERROR THEN GOTO TIDY
  85 $ ON CONTROL_C THEN GOTO TIDY
  86 $!
  87 $! Check if we're in a batch job, and make sure we get to
  88 $! the directory this script is in
  89 $!
  90 $ IF F$MODE() .EQS. "BATCH"
  91 $ THEN
  92 $   COMNAME=F$ENVIRONMENT("PROCEDURE")
  93 $   COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
  94 $   SET DEF 'COMPATH'
  95 $ ENDIF
  96 $!
  97 $! Check What Architecture We Are Using.
  98 $!
  99 $ IF (F$GETSYI("CPU").LT.128)
 100 $ THEN
 101 $!
 102 $!  The Architecture Is VAX.
 103 $!
 104 $   ARCH = "VAX"
 105 $!
 106 $! Else...
 107 $!
 108 $ ELSE
 109 $!
 110 $!  The Architecture Is Alpha, IA64 or whatever comes in the future.
 111 $!
 112 $   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
 113 $   IF (ARCH .EQS. "") THEN ARCH = "UNK"
 114 $!
 115 $! End The Architecture Check.
 116 $!
 117 $ ENDIF
 118 $!
 119 $ ARCHD = ARCH
 120 $ LIB32 = "32"
 121 $ POINTER_SIZE = ""
 122 $!
 123 $! Get VMS version.
 124 $!
 125 $ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
 126 $!
 127 $! Check To Make Sure We Have Valid Command Line Parameters.
 128 $!
 129 $ GOSUB CHECK_OPTIONS
 130 $!
 131 $! Check To See What We Are To Do.
 132 $!
 133 $ IF (BUILDCOMMAND.EQS."ALL")
 134 $ THEN
 135 $!
 136 $!  Start with building the OpenSSL configuration file.
 137 $!
 138 $   GOSUB CONFIG
 139 $!
 140 $!  Create The "BUILDINF.H" Include File.
 141 $!
 142 $   GOSUB BUILDINF
 143 $!
 144 $!  Fix The Unix Softlinks.
 145 $!
 146 $   GOSUB SOFTLINKS
 147 $!
 148 $ ENDIF
 149 $!
 150 $ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
 151 $ THEN
 152 $!
 153 $!  Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
 154 $!
 155 $   GOSUB CRYPTO
 156 $!
 157 $!  Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
 158 $!
 159 $   GOSUB SSL
 160 $!
 161 $!  Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.
 162 $!
 163 $   GOSUB SSL_TASK
 164 $!
 165 $!  Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
 166 $!
 167 $   GOSUB TEST
 168 $!
 169 $!  Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
 170 $!
 171 $   GOSUB APPS
 172 $!
 173 $!  Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
 174 $!
 175 $   GOSUB ENGINES
 176 $!
 177 $! Else...
 178 $!
 179 $ ELSE
 180 $!
 181 $!    Build Just What The User Wants Us To Build.
 182 $!
 183 $     GOSUB 'BUILDCOMMAND'
 184 $!
 185 $ ENDIF
 186 $!
 187 $! Time To EXIT.
 188 $!
 189 $ GOTO TIDY
 190 $!
 191 $! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
 192 $!
 193 $ CONFIG:
 194 $!
 195 $! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
 196 $!
 197 $ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File."
 198 $!
 199 $! First, make sure the directory exists.
 200 $!
 201 $ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN -
 202      CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD']
 203 $!
 204 $! Different tar/UnZip versions/option may have named the file differently
 205 $ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
 206 $ THEN
 207 $   OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
 208 $ ELSE
 209 $   IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
 210 $   THEN
 211 $     OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
 212 $   ELSE
 213 $     ! For ODS-5
 214 $     IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
 215 $     THEN
 216 $       OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
 217 $     ELSE
 218 $       WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in.  Exiting!"
 219 $       $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
 220 $       GOTO TIDY
 221 $     ENDIF
 222 $   ENDIF
 223 $ ENDIF
 224 $!
 225 $! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
 226 $! Make sure it has the right format.
 227 $!
 228 $ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H"
 229 $ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
 230 RECORD
 231         FORMAT stream_lf
 232 $ OPEN /APPEND H_FILE 'OSCH_NAME'
 233 $!
 234 $! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
 235 $!
 236 $ WRITE H_FILE "/* This file was automatically built using makevms.com */"
 237 $ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
 238 $!
 239 $! Write a few macros that indicate how this system was built.
 240 $!
 241 $ WRITE H_FILE ""
 242 $ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
 243 $ WRITE H_FILE "# define OPENSSL_SYS_VMS"
 244 $ WRITE H_FILE "#endif"
 245 $!
 246 $! One of the best way to figure out what the list should be is to do
 247 $! the following on a Unix system:
 248 $!   grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
 249 $! For that reason, the list will also always end up in alphabetical order
 250 $ CONFIG_LOGICALS := AES,-
 251                      ASM,INLINE_ASM,-
 252                      BF,-
 253                      BIO,-
 254                      BUFFER,-
 255                      BUF_FREELISTS,-
 256                      CAMELLIA,-
 257                      CAST,-
 258                      CMS,-
 259                      COMP,-
 260                      DEPRECATED,-
 261                      DES,-
 262                      DGRAM,-
 263                      DH,-
 264                      DSA,-
 265                      EC,-
 266                      EC2M,-
 267                      ECDH,-
 268                      ECDSA,-
 269                      EC_NISTP_64_GCC_128,-
 270                      ENGINE,-
 271                      ERR,-
 272                      EVP,-
 273                      FP_API,-
 274                      GMP,-
 275                      GOST,-
 276                      HASH_COMP,-
 277                      HEARTBEATS,-
 278                      HMAC,-
 279                      IDEA,-
 280                      JPAKE,-
 281                      KRB5,-
 282                      LHASH,-
 283                      MD2,-
 284                      MD4,-
 285                      MD5,-
 286                      MDC2,-
 287                      NEXTPROTONEG,-
 288                      OCSP,-
 289                      PSK,-
 290                      RC2,-
 291                      RC4,-
 292                      RC5,-
 293                      RFC3779,-
 294                      RIPEMD,-
 295                      RSA,-
 296                      SCTP,-
 297                      SEED,-
 298                      SHA,-
 299                      SHA0,-
 300                      SHA1,-
 301                      SHA256,-
 302                      SHA512,-
 303                      SOCK,-
 304                      SRP,-
 305                      SSL2,-
 306                      SSL_INTERN,-
 307                      SSL_TRACE,-
 308                      STACK,-
 309                      STATIC_ENGINE,-
 310                      STDIO,-
 311                      STORE,-
 312                      TLSEXT,-
 313                      WHIRLPOOL,-
 314                      X509
 315 $! Add a few that we know about
 316 $ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
 317                      THREADS
 318 $! The following rules, which dictate how some algorithm choices affect
 319 $! others, are picked from Configure.
 320 $! Quick syntax:
 321 $!  list = item[ ; list]
 322 $!  item = algos / dependents
 323 $!  algos = algo [, algos]
 324 $!  dependents = dependent [, dependents]
 325 $! When a list of algos is specified in one item, it means that they must
 326 $! all be disabled for the rule to apply.
 327 $! When a list of dependents is specified in one item, it means that they
 328 $! will all be disabled if the rule applies.
 329 $! Rules are checked sequentially.  If a rule disables an algorithm, it will
 330 $! affect all following rules that depend on that algorithm being disabled.
 331 $! To force something to be enabled or disabled, have no algorithms in the
 332 $! algos part.
 333 $ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
 334                           DES/MDC2;-
 335                           EC/ECDSA,ECDH;-
 336                           MD5/SSL2,SSL3,TLS1;-
 337                           SHA/SSL3,TLS1;-
 338                           RSA/SSL2;-
 339                           RSA,DSA/SSL2;-
 340                           DH/SSL3,TLS1;-
 341                           TLS1/TLSEXT;-
 342                           EC/GOST;-
 343                           DSA/GOST;-
 344                           DH/GOST;-
 345                           /STATIC_ENGINE;-
 346                           /KRB5;-
 347                           /EC_NISTP_64_GCC_128;-
 348                           /GMP;-
 349                           /MD2;-
 350                           /RC5;-
 351                           /RFC3779;-
 352                           /SCTP;-
 353                           /SSL_TRACE
 354 $ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
 355                          /THREADS
 356 $
 357 $! Architecture specific rule addtions
 358 $ IF ARCH .EQS. "VAX"
 359 $ THEN
 360 $   ! Disable algorithms that require 64-bit integers in C
 361 $   CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
 362                            ";/GOST" + -
 363                            ";/WHIRLPOOL"
 364 $ ENDIF
 365 $
 366 $ CONFIG_LOG_I = 0
 367 $ CONFIG_LOG_LOOP1:
 368 $   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
 369 $   CONFIG_LOG_I = CONFIG_LOG_I + 1
 370 $   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
 371 $   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
 372 $   IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
 373 $   THEN
 374 $       CONFIG_DISABLED_'CONFIG_LOG_E' := YES
 375 $       CONFIG_ENABLED_'CONFIG_LOG_E' := NO
 376 $       CONFIG_CHANGED_'CONFIG_LOG_E' := YES
 377 $   ELSE
 378 $       CONFIG_DISABLED_'CONFIG_LOG_E' := NO
 379 $       CONFIG_ENABLED_'CONFIG_LOG_E' := YES
 380 $       ! Because all algorithms are assumed enabled by default
 381 $       CONFIG_CHANGED_'CONFIG_LOG_E' := NO
 382 $   ENDIF
 383 $   GOTO CONFIG_LOG_LOOP1
 384 $ CONFIG_LOG_LOOP1_END:
 385 $
 386 $! Apply cascading disable rules
 387 $ CONFIG_DISABLE_I = 0
 388 $ CONFIG_DISABLE_LOOP0:
 389 $   CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", -
 390      CONFIG_DISABLE_RULES),"TRIM")
 391 $   CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
 392 $   IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
 393 $   IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
 394 $
 395 $   CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
 396 $   CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
 397 $   TO_DISABLE := YES
 398 $   CONFIG_ALGO_I = 0
 399 $   CONFIG_DISABLE_LOOP1:
 400 $     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
 401        CONFIG_DISABLE_ALGOS),"TRIM")
 402 $     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
 403 $     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
 404 $     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
 405 $     IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
 406 $     THEN
 407 $       TO_DISABLE := NO
 408 $     ELSE
 409 $       IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
 410 $     ENDIF
 411 $     GOTO CONFIG_DISABLE_LOOP1
 412 $   CONFIG_DISABLE_LOOP1_END:
 413 $
 414 $   IF TO_DISABLE
 415 $   THEN
 416 $     CONFIG_DEPENDENT_I = 0
 417 $     CONFIG_DISABLE_LOOP2:
 418 $       CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
 419          CONFIG_DISABLE_DEPENDENTS),"TRIM")
 420 $       CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
 421 $       IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
 422 $       IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
 423 $       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
 424 $       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
 425 $       ! Better not to assume defaults at this point...
 426 $       CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
 427 $       WRITE SYS$ERROR -
 428          "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
 429 $       GOTO CONFIG_DISABLE_LOOP2
 430 $     CONFIG_DISABLE_LOOP2_END:
 431 $   ENDIF
 432 $   GOTO CONFIG_DISABLE_LOOP0
 433 $ CONFIG_DISABLE_LOOP0_END:
 434 $
 435 $! Apply cascading enable rules
 436 $ CONFIG_ENABLE_I = 0
 437 $ CONFIG_ENABLE_LOOP0:
 438 $   CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", -
 439      CONFIG_ENABLE_RULES),"TRIM")
 440 $   CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
 441 $   IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
 442 $   IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
 443 $
 444 $   CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
 445 $   CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
 446 $   TO_ENABLE := YES
 447 $   CONFIG_ALGO_I = 0
 448 $   CONFIG_ENABLE_LOOP1:
 449 $     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
 450        CONFIG_ENABLE_ALGOS),"TRIM")
 451 $     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
 452 $     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
 453 $     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
 454 $     IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
 455 $     THEN
 456 $       TO_ENABLE := NO
 457 $     ELSE
 458 $       IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
 459 $     ENDIF
 460 $     GOTO CONFIG_ENABLE_LOOP1
 461 $   CONFIG_ENABLE_LOOP1_END:
 462 $
 463 $   IF TO_ENABLE
 464 $   THEN
 465 $     CONFIG_DEPENDENT_I = 0
 466 $     CONFIG_ENABLE_LOOP2:
 467 $       CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
 468          CONFIG_ENABLE_DEPENDENTS),"TRIM")
 469 $       CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
 470 $       IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
 471 $       IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
 472 $       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
 473 $       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
 474 $       ! Better not to assume defaults at this point...
 475 $       CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
 476 $       WRITE SYS$ERROR -
 477          "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
 478 $       GOTO CONFIG_ENABLE_LOOP2
 479 $     CONFIG_ENABLE_LOOP2_END:
 480 $   ENDIF
 481 $   GOTO CONFIG_ENABLE_LOOP0
 482 $ CONFIG_ENABLE_LOOP0_END:
 483 $
 484 $! Write to the configuration
 485 $ CONFIG_LOG_I = 0
 486 $ CONFIG_LOG_LOOP2:
 487 $   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
 488 $   CONFIG_LOG_I = CONFIG_LOG_I + 1
 489 $   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
 490 $   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
 491 $   IF CONFIG_CHANGED_'CONFIG_LOG_E'
 492 $   THEN
 493 $     IF CONFIG_DISABLED_'CONFIG_LOG_E'
 494 $     THEN
 495 $       WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
 496 $       WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
 497 $       WRITE H_FILE "#endif"
 498 $     ELSE
 499 $       WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
 500 $       WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
 501 $       WRITE H_FILE "#endif"
 502 $     ENDIF
 503 $   ENDIF
 504 $   GOTO CONFIG_LOG_LOOP2
 505 $ CONFIG_LOG_LOOP2_END:
 506 $!
 507 $ WRITE H_FILE ""
 508 $ WRITE H_FILE "/* 2011-02-23 SMS."
 509 $ WRITE H_FILE " * On VMS (V8.3), setvbuf() doesn't support a 64-bit"
 510 $ WRITE H_FILE " * ""in"" pointer, and the help says:"
 511 $ WRITE H_FILE " *       Please note that the previously documented"
 512 $ WRITE H_FILE " *       value _IONBF is not supported."
 513 $ WRITE H_FILE " * So, skip it on VMS."
 514 $ WRITE H_FILE " */"
 515 $ WRITE H_FILE "#define OPENSSL_NO_SETVBUF_IONBF"
 516 $ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
 517 $ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */"
 518 $ WRITE H_FILE "#define OPENSSL_NO_SCTP"
 519 $ WRITE H_FILE "#define OPENSSL_NO_LIBUNBOUND"
 520 $ WRITE H_FILE ""
 521 $!
 522 $! Add in the common "crypto/opensslconf.h.in".
 523 $!
 524 $ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
 525 $!
 526 $ IF ARCH .NES. "VAX"
 527 $ THEN
 528 $!
 529 $!  Write the non-VAX specific data
 530 $!
 531 $   WRITE H_FILE "#if defined(HEADER_RC4_H)"
 532 $   WRITE H_FILE "#undef RC4_INT"
 533 $   WRITE H_FILE "#define RC4_INT unsigned int"
 534 $   WRITE H_FILE "#undef RC4_CHUNK"
 535 $   WRITE H_FILE "#define RC4_CHUNK unsigned long long"
 536 $   WRITE H_FILE "#endif"
 537 $!
 538 $   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
 539 $   WRITE H_FILE "#undef DES_LONG"
 540 $   WRITE H_FILE "#define DES_LONG unsigned int"
 541 $   WRITE H_FILE "#undef DES_PTR"
 542 $   WRITE H_FILE "#define DES_PTR"
 543 $   WRITE H_FILE "#undef DES_RISC1"
 544 $   WRITE H_FILE "#undef DES_RISC2"
 545 $   WRITE H_FILE "#define DES_RISC1"
 546 $   WRITE H_FILE "#undef DES_UNROLL"
 547 $   WRITE H_FILE "#define DES_UNROLL"
 548 $   WRITE H_FILE "#endif"
 549 $!
 550 $   WRITE H_FILE "#if defined(HEADER_BN_H)"
 551 $   WRITE H_FILE "#undef BN_LLONG"      ! Never define with SIXTY_FOUR_BIT
 552 $   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
 553 $   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
 554 $   WRITE H_FILE "#define SIXTY_FOUR_BIT"
 555 $   WRITE H_FILE "#undef THIRTY_TWO_BIT"
 556 $   WRITE H_FILE "#undef SIXTEEN_BIT"
 557 $   WRITE H_FILE "#undef EIGHT_BIT"
 558 $   WRITE H_FILE "#endif"
 559 $
 560 $   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
 561 $!
 562 $!  Else...
 563 $!
 564 $ ELSE
 565 $!
 566 $!  Write the VAX specific data
 567 $!
 568 $   WRITE H_FILE "#if defined(HEADER_RC4_H)"
 569 $   WRITE H_FILE "#undef RC4_INT"
 570 $   WRITE H_FILE "#define RC4_INT unsigned char"
 571 $   WRITE H_FILE "#undef RC4_CHUNK"
 572 $   WRITE H_FILE "#define RC4_CHUNK unsigned long"
 573 $   WRITE H_FILE "#endif"
 574 $!
 575 $   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
 576 $   WRITE H_FILE "#undef DES_LONG"
 577 $   WRITE H_FILE "#define DES_LONG unsigned long"
 578 $   WRITE H_FILE "#undef DES_PTR"
 579 $   WRITE H_FILE "#define DES_PTR"
 580 $   WRITE H_FILE "#undef DES_RISC1"
 581 $   WRITE H_FILE "#undef DES_RISC2"
 582 $   WRITE H_FILE "#undef DES_UNROLL"
 583 $   WRITE H_FILE "#endif"
 584 $!
 585 $   WRITE H_FILE "#if defined(HEADER_BN_H)"
 586 $   WRITE H_FILE "#undef BN_LLONG"      ! VAX C/DEC C doesn't have long long
 587 $   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
 588 $   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
 589 $   WRITE H_FILE "#undef THIRTY_TWO_BIT"
 590 $   WRITE H_FILE "#define THIRTY_TWO_BIT"
 591 $   WRITE H_FILE "#undef SIXTEEN_BIT"
 592 $   WRITE H_FILE "#undef EIGHT_BIT"
 593 $   WRITE H_FILE "#endif"
 594 $!
 595 $! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
 596 $! before sha.h gets included (and HEADER_SHA_H defined), so we will not
 597 $! protect this one...
 598 $   WRITE H_FILE "#undef OPENSSL_NO_SHA512"
 599 $   WRITE H_FILE "#define OPENSSL_NO_SHA512"
 600 $!
 601 $   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
 602 $   WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
 603 $!
 604 $!  End
 605 $!
 606 $ ENDIF
 607 $!
 608 $! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
 609 $!
 610 $ CLOSE H_FILE
 611 $!
 612 $! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
 613 $!
 614 $ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H
 615 $!
 616 $! That's All, Time To RETURN.
 617 $!
 618 $ RETURN
 619 $!
 620 $! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
 621 $!
 622 $ BUILDINF:
 623 $!
 624 $! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
 625 $!
 626 $ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File."
 627 $!
 628 $! Create The [.CRYPTO._xxx]BUILDINF.H File.
 629 $!
 630 $ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H"
 631 $ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
 632 RECORD
 633         FORMAT stream_lf
 634 $!
 635 $ OPEN /APPEND H_FILE 'bih_name'
 636 $!
 637 $! Get The Current Date & Time.
 638 $!
 639 $ TIME = F$TIME()
 640 $!
 641 $! Write The [.CRYPTO._xxx]BUILDINF.H File.
 642 $!
 643 $ CFLAGS = ""
 644 $ if (POINTER_SIZE .nes. "")
 645 $ then
 646 $   CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'"
 647 $ endif
 648 $ if (ZLIB .nes. "")
 649 $ then
 650 $   if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " "
 651 $   CFLAGS = CFLAGS+ "/DEFINE=ZLIB"
 652 $ endif
 653 $!
 654 $ WRITE H_FILE "#define CFLAGS cflags"
 655 $ WRITE H_FILE "static const char cflags[] = ""compiler: ''CFLAGS'"";"
 656 $ WRITE H_FILE "#define PLATFORM ""platform: VMS ''ARCHD' ''VMS_VERSION'"""
 657 $ WRITE H_FILE "#define DATE ""built on: ''TIME'"" "
 658 $!
 659 $! Close The [.CRYPTO._xxx]BUILDINF.H File.
 660 $!
 661 $ CLOSE H_FILE
 662 $!
 663 $! Purge The [.CRYPTO._xxx]BUILDINF.H File.
 664 $!
 665 $ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H
 666 $!
 667 $! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
 668 $!
 669 $ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
 670      DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
 671 $!
 672 $! That's All, Time To RETURN.
 673 $!
 674 $ RETURN
 675 $!
 676 $! Copy a lot of files around.
 677 $!
 678 $ SOFTLINKS:
 679 $!
 680 $!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
 681 $!!!!
 682 $!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
 683 $!!!!
 684 $!!! DELETE SYS$DISK:[.APPS]MD4.C;*
 685 $!!!!
 686 $!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
 687 $!!!!
 688 $!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
 689 $!
 690 $! Ensure that the [.include.openssl] directory contains a full set of
 691 $! real header files.  The distribution kit may have left real or fake
 692 $! symlinks there.  Rather than think about what's there, simply delete
 693 $! the destination files (fake or real symlinks) before copying the real
 694 $! header files in.  (Copying a real header file onto a real symlink
 695 $! merely duplicates the real header file at its source.)
 696 $!
 697 $! Tell The User We Are Rebuilding The [.include.openssl] Directory.
 698 $!
 699 $ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory."
 700 $!
 701 $! First, make sure the directory exists.  If it did exist, delete all
 702 $! the existing header files (or fake or real symlinks).
 703 $!
 704 $ if f$parse( "sys$disk:[.include.openssl]") .eqs. ""
 705 $ then
 706 $   create /directory sys$disk:[.include.openssl]
 707 $ else
 708 $   delete sys$disk:[.include.openssl]*.h;*
 709 $ endif
 710 $!
 711 $! Copy All The ".H" Files From The Main Directory.
 712 $!
 713 $ EXHEADER := e_os2.h
 714 $ copy 'exheader' sys$disk:[.include.openssl]
 715 $!
 716 $! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
 717 $!
 718 $ SDIRS := , -
 719    'ARCHD', -
 720    OBJECTS, -
 721    MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
 722    DES, AES, RC2, RC4, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
 723    BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
 724    BUFFER, BIO, STACK, LHASH, RAND, ERR, -
 725    EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
 726    COMP, OCSP, UI, KRB5, -
 727    CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
 728 $!
 729 $ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
 730 $ EXHEADER_'ARCHD' := opensslconf.h
 731 $ EXHEADER_OBJECTS := objects.h, obj_mac.h
 732 $ EXHEADER_MD2 := md2.h
 733 $ EXHEADER_MD4 := md4.h
 734 $ EXHEADER_MD5 := md5.h
 735 $ EXHEADER_SHA := sha.h
 736 $ EXHEADER_MDC2 := mdc2.h
 737 $ EXHEADER_HMAC := hmac.h
 738 $ EXHEADER_RIPEMD := ripemd.h
 739 $ EXHEADER_WHRLPOOL := whrlpool.h
 740 $ EXHEADER_DES := des.h, des_old.h
 741 $ EXHEADER_AES := aes.h
 742 $ EXHEADER_RC2 := rc2.h
 743 $ EXHEADER_RC4 := rc4.h
 744 $ EXHEADER_RC5 := rc5.h
 745 $ EXHEADER_IDEA := idea.h
 746 $ EXHEADER_BF := blowfish.h
 747 $ EXHEADER_CAST := cast.h
 748 $ EXHEADER_CAMELLIA := camellia.h
 749 $ EXHEADER_SEED := seed.h
 750 $ EXHEADER_MODES := modes.h
 751 $ EXHEADER_BN := bn.h
 752 $ EXHEADER_EC := ec.h
 753 $ EXHEADER_RSA := rsa.h
 754 $ EXHEADER_DSA := dsa.h
 755 $ EXHEADER_ECDSA := ecdsa.h
 756 $ EXHEADER_DH := dh.h
 757 $ EXHEADER_ECDH := ecdh.h
 758 $ EXHEADER_DSO := dso.h
 759 $ EXHEADER_ENGINE := engine.h
 760 $ EXHEADER_BUFFER := buffer.h
 761 $ EXHEADER_BIO := bio.h
 762 $ EXHEADER_STACK := stack.h, safestack.h
 763 $ EXHEADER_LHASH := lhash.h
 764 $ EXHEADER_RAND := rand.h
 765 $ EXHEADER_ERR := err.h
 766 $ EXHEADER_EVP := evp.h
 767 $ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h
 768 $ EXHEADER_PEM := pem.h, pem2.h
 769 $ EXHEADER_X509 := x509.h, x509_vfy.h
 770 $ EXHEADER_X509V3 := x509v3.h
 771 $ EXHEADER_CONF := conf.h, conf_api.h
 772 $ EXHEADER_TXT_DB := txt_db.h
 773 $ EXHEADER_PKCS7 := pkcs7.h
 774 $ EXHEADER_PKCS12 := pkcs12.h
 775 $ EXHEADER_COMP := comp.h
 776 $ EXHEADER_OCSP := ocsp.h
 777 $ EXHEADER_UI := ui.h, ui_compat.h
 778 $ EXHEADER_KRB5 := krb5_asn.h
 779 $ EXHEADER_CMS := cms.h
 780 $ EXHEADER_PQUEUE := pqueue.h
 781 $ EXHEADER_TS := ts.h
 782 $ EXHEADER_JPAKE := jpake.h
 783 $ EXHEADER_SRP := srp.h
 784 $!!! EXHEADER_STORE := store.h, str_compat.h
 785 $ EXHEADER_STORE := store.h
 786 $ EXHEADER_CMAC := cmac.h
 787 $!
 788 $ i = 0
 789 $ loop_sdirs:
 790 $   sdir = f$edit( f$element( i, ",", sdirs), "trim")
 791 $   i = i + 1
 792 $   if (sdir .eqs. ",") then goto loop_sdirs_end
 793 $   hdr_list = exheader_'sdir'
 794 $   if (sdir .nes. "") then sdir = "."+ sdir
 795 $   copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
 796 $ goto loop_sdirs
 797 $ loop_sdirs_end:
 798 $!
 799 $! Copy All The ".H" Files From The [.SSL] Directory.
 800 $!
 801 $! (keep these in the same order as ssl/Makefile)
 802 $ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h, srtp.h
 803 $ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
 804 $!
 805 $! Purge the [.include.openssl] header files.
 806 $!
 807 $ purge sys$disk:[.include.openssl]*.h
 808 $!
 809 $! That's All, Time To RETURN.
 810 $!
 811 $ RETURN
 812 $!
 813 $! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library.
 814 $!
 815 $ CRYPTO:
 816 $!
 817 $! Tell The User What We Are Doing.
 818 $!
 819 $ WRITE SYS$OUTPUT ""
 820 $ WRITE SYS$OUTPUT -
 821    "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library."
 822 $!
 823 $! Go To The [.CRYPTO] Directory.
 824 $!
 825 $ SET DEFAULT SYS$DISK:[.CRYPTO]
 826 $!
 827 $! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
 828 $!
 829 $ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 830    "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
 831 $!
 832 $! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
 833 $!
 834 $!!! DISABLED, as these test programs lack any support
 835 $!!!$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 836 $!!!   "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
 837 $!
 838 $! Go Back To The Main Directory.
 839 $!
 840 $ SET DEFAULT [-]
 841 $!
 842 $! Time To RETURN.
 843 $!
 844 $ RETURN
 845 $!
 846 $! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library.
 847 $!
 848 $ SSL:
 849 $!
 850 $! Tell The User What We Are Doing.
 851 $!
 852 $ WRITE SYS$OUTPUT ""
 853 $ WRITE SYS$OUTPUT -
 854    "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library."
 855 $!
 856 $! Go To The [.SSL] Directory.
 857 $!
 858 $ SET DEFAULT SYS$DISK:[.SSL]
 859 $!
 860 $! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
 861 $!
 862 $ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 863    "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
 864 $!
 865 $! Go Back To The Main Directory.
 866 $!
 867 $ SET DEFAULT [-]
 868 $!
 869 $! Time To Return.
 870 $!
 871 $ RETURN
 872 $!
 873 $! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.
 874 $!
 875 $ SSL_TASK:
 876 $!
 877 $! Tell The User What We Are Doing.
 878 $!
 879 $ WRITE SYS$OUTPUT ""
 880 $ WRITE SYS$OUTPUT -
 881    "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE"
 882 $!
 883 $! Go To The [.SSL] Directory.
 884 $!
 885 $ SET DEFAULT SYS$DISK:[.SSL]
 886 $!
 887 $! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
 888 $!
 889 $ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 890    "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
 891 $!
 892 $! Go Back To The Main Directory.
 893 $!
 894 $ SET DEFAULT [-]
 895 $!
 896 $! That's All, Time To RETURN.
 897 $!
 898 $ RETURN
 899 $!
 900 $! Build The OpenSSL Test Programs.
 901 $!
 902 $ TEST:
 903 $!
 904 $! Tell The User What We Are Doing.
 905 $!
 906 $ WRITE SYS$OUTPUT ""
 907 $ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities."
 908 $!
 909 $! Go To The [.TEST] Directory.
 910 $!
 911 $ SET DEFAULT SYS$DISK:[.TEST]
 912 $!
 913 $! Build The Test Programs.
 914 $!
 915 $ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
 916    "''POINTER_SIZE'" "''ZLIB'"
 917 $!
 918 $! Go Back To The Main Directory.
 919 $!
 920 $ SET DEFAULT [-]
 921 $!
 922 $! That's All, Time To RETURN.
 923 $!
 924 $ RETURN
 925 $!
 926 $! Build The OpenSSL Application Programs.
 927 $!
 928 $ APPS:
 929 $!
 930 $! Tell The User What We Are Doing.
 931 $!
 932 $ WRITE SYS$OUTPUT ""
 933 $ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications."
 934 $!
 935 $! Go To The [.APPS] Directory.
 936 $!
 937 $ SET DEFAULT SYS$DISK:[.APPS]
 938 $!
 939 $! Build The Application Programs.
 940 $!
 941 $ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
 942    "" "''POINTER_SIZE'" "''ZLIB'"
 943 $!
 944 $! Go Back To The Main Directory.
 945 $!
 946 $ SET DEFAULT [-]
 947 $!
 948 $! That's All, Time To RETURN.
 949 $!
 950 $ RETURN
 951 $!
 952 $! Build The OpenSSL Application Programs.
 953 $!
 954 $ ENGINES:
 955 $!
 956 $! Tell The User What We Are Doing.
 957 $!
 958 $ WRITE SYS$OUTPUT ""
 959 $ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines."
 960 $!
 961 $! Go To The [.ENGINES] Directory.
 962 $!
 963 $ SET DEFAULT SYS$DISK:[.ENGINES]
 964 $!
 965 $! Build The Application Programs.
 966 $!
 967 $ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 968    "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
 969 $!
 970 $! Go Back To The Main Directory.
 971 $!
 972 $ SET DEFAULT [-]
 973 $!
 974 $! That's All, Time To RETURN.
 975 $!
 976 $ RETURN
 977 $!
 978 $! Check The User's Options.
 979 $!
 980 $ CHECK_OPTIONS:
 981 $!
 982 $! Check if there's a "part", and separate it out
 983 $!
 984 $ BUILDPART = F$ELEMENT(1,"/",P1)
 985 $ IF BUILDPART .EQS. "/"
 986 $ THEN
 987 $   BUILDPART = ""
 988 $ ELSE
 989 $   P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
 990 $ ENDIF
 991 $!
 992 $! Check To See If P1 Is Blank.
 993 $!
 994 $ IF (P1.EQS."ALL")
 995 $ THEN
 996 $!
 997 $!   P1 Is ALL, So Build Everything.
 998 $!
 999 $    BUILDCOMMAND = "ALL"
1000 $!
1001 $! Else...
1002 $!
1003 $ ELSE
1004 $!
1005 $!  Else, Check To See If P1 Has A Valid Argument.
1006 $!
1007 $   IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
1008        .OR.(P1.EQS."BUILDALL") -
1009        .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
1010        .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
1011        .OR.(P1.EQS."ENGINES")
1012 $   THEN
1013 $!
1014 $!    A Valid Argument.
1015 $!
1016 $     BUILDCOMMAND = P1
1017 $!
1018 $!  Else...
1019 $!
1020 $   ELSE
1021 $!
1022 $!    Tell The User We Don't Know What They Want.
1023 $!
1024 $     WRITE SYS$OUTPUT ""
1025 $     WRITE SYS$OUTPUT "USAGE:   @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler> <TCP/IP library>"
1026 $     WRITE SYS$OUTPUT ""
1027 $     WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG DECC TCPIP"
1028 $     WRITE SYS$OUTPUT ""
1029 $     WRITE SYS$OUTPUT "The Target ",P1," Is Invalid.  The Valid Target Options Are:"
1030 $     WRITE SYS$OUTPUT ""
1031 $     WRITE SYS$OUTPUT "    ALL      :  Just Build Everything."
1032 $     WRITE SYS$OUTPUT "    CONFIG   :  Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
1033 $     WRITE SYS$OUTPUT "    BUILDINF :  Just build the [.CRYPTO._xxx]BUILDINF.H file."
1034 $     WRITE SYS$OUTPUT "    SOFTLINKS:  Just Fix The Unix soft links."
1035 $     WRITE SYS$OUTPUT "    BUILDALL :  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
1036 $     WRITE SYS$OUTPUT "    CRYPTO   :  To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
1037 $     WRITE SYS$OUTPUT "    CRYPTO/x :  To Build Just The x Part Of The"
1038 $     WRITE SYS$OUTPUT "                [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
1039 $     WRITE SYS$OUTPUT "    SSL      :  To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
1040 $     WRITE SYS$OUTPUT "    SSL_TASK :  To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
1041 $     WRITE SYS$OUTPUT "    TEST     :  To Build Just The OpenSSL Test Programs."
1042 $     WRITE SYS$OUTPUT "    APPS     :  To Build Just The OpenSSL Application Programs."
1043 $     WRITE SYS$OUTPUT "    ENGINES  :  To Build Just The ENGINES"
1044 $     WRITE SYS$OUTPUT ""
1045 $     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
1046 $     WRITE SYS$OUTPUT ""
1047 $     WRITE SYS$OUTPUT "    ALPHA[64]:  Alpha Architecture."
1048 $     WRITE SYS$OUTPUT "    IA64[64] :  IA64 Architecture."
1049 $     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."
1050 $     WRITE SYS$OUTPUT ""
1051 $!
1052 $!    Time To EXIT.
1053 $!
1054 $     GOTO TIDY
1055 $!
1056 $!  End The Valid Argument Check.
1057 $!
1058 $   ENDIF
1059 $!
1060 $! End The P1 Check.
1061 $!
1062 $ ENDIF
1063 $!
1064 $! Check P2 (POINTER_SIZE).
1065 $!
1066 $ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX")
1067 $ THEN
1068 $!
1069 $   IF (P2 .EQS. "32")
1070 $   THEN
1071 $     POINTER_SIZE = "32"
1072 $   ELSE
1073 $     POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE")
1074 $     IF ((POINTER_SIZE .EQS. "64") .OR. -
1075        (POINTER_SIZE .EQS. "64=") .OR. -
1076        (POINTER_SIZE .EQS. "64=ARGV"))
1077 $     THEN
1078 $       ARCHD = ARCH+ "_64"
1079 $       LIB32 = ""
1080 $     ELSE
1081 $!
1082 $!      Tell The User Entered An Invalid Option.
1083 $!
1084 $       WRITE SYS$OUTPUT ""
1085 $       WRITE SYS$OUTPUT "The Option ", P2, -
1086          " Is Invalid.  The Valid Options Are:"
1087 $       WRITE SYS$OUTPUT ""
1088 $       WRITE SYS$OUTPUT -
1089          "    """"       :  Compile with default (short) pointers."
1090 $       WRITE SYS$OUTPUT -
1091          "    32       :  Compile with 32-bit (short) pointers."
1092 $       WRITE SYS$OUTPUT -
1093          "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
1094 $       WRITE SYS$OUTPUT -
1095          "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
1096 $       WRITE SYS$OUTPUT -
1097          "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
1098 $       WRITE SYS$OUTPUT ""
1099 $!
1100 $!      Time To EXIT.
1101 $!
1102 $       GOTO TIDY
1103 $!
1104 $     ENDIF
1105 $!
1106 $   ENDIF
1107 $!
1108 $! End The P2 (POINTER_SIZE) Check.
1109 $!
1110 $ ENDIF
1111 $!
1112 $! Check To See If P3 Is Blank.
1113 $!
1114 $ IF (P3.EQS."NODEBUG")
1115 $ THEN
1116 $!
1117 $!   P3 Is NODEBUG, So Compile Without Debugger Information.
1118 $!
1119 $    DEBUGGER = "NODEBUG"
1120 $!
1121 $! Else...
1122 $!
1123 $ ELSE
1124 $!
1125 $!  Check To See If We Are To Compile With Debugger Information.
1126 $!
1127 $   IF (P3.EQS."DEBUG")
1128 $   THEN
1129 $!
1130 $!    Compile With Debugger Information.
1131 $!
1132 $     DEBUGGER = "DEBUG"
1133 $!
1134 $!  Else...
1135 $!
1136 $   ELSE
1137 $!
1138 $!    Tell The User Entered An Invalid Option.
1139 $!
1140 $     WRITE SYS$OUTPUT ""
1141 $     WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
1142 $     WRITE SYS$OUTPUT ""
1143 $     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
1144 $     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
1145 $     WRITE SYS$OUTPUT ""
1146 $!
1147 $!    Time To EXIT.
1148 $!
1149 $     GOTO TIDY
1150 $!
1151 $!  End The Valid Argument Check.
1152 $!
1153 $   ENDIF
1154 $!
1155 $! End The P3 Check.
1156 $!
1157 $ ENDIF
1158 $!
1159 $! Check To See If P4 Is Blank.
1160 $!
1161 $ IF (P4.EQS."")
1162 $ THEN
1163 $!
1164 $!  O.K., The User Didn't Specify A Compiler, Let's Try To
1165 $!  Find Out Which One To Use.
1166 $!
1167 $!  Check To See If We Have GNU C.
1168 $!
1169 $   IF (F$TRNLNM("GNU_CC").NES."")
1170 $   THEN
1171 $!
1172 $!    Looks Like GNUC, Set To Use GNUC.
1173 $!
1174 $     COMPILER = "GNUC"
1175 $!
1176 $!    Tell The User We Are Using GNUC.
1177 $!
1178 $     WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
1179 $!
1180 $!  End The GNU C Compiler Check.
1181 $!
1182 $   ENDIF
1183 $!
1184 $!  Check To See If We Have VAXC Or DECC.
1185 $!
1186 $   IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")
1187 $   THEN
1188 $!
1189 $!    Looks Like DECC, Set To Use DECC.
1190 $!
1191 $     COMPILER = "DECC"
1192 $!
1193 $!    Tell The User We Are Using DECC.
1194 $!
1195 $     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
1196 $!
1197 $!  Else...
1198 $!
1199 $   ELSE
1200 $!
1201 $!    Looks Like VAXC, Set To Use VAXC.
1202 $!
1203 $     COMPILER = "VAXC"
1204 $!
1205 $!    Tell The User We Are Using VAX C.
1206 $!
1207 $     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
1208 $!
1209 $!  End The DECC & VAXC Compiler Check.
1210 $!
1211 $   ENDIF
1212 $!
1213 $! Else...
1214 $!
1215 $ ELSE
1216 $!
1217 $!  Check To See If The User Entered A Valid Parameter.
1218 $!
1219 $   IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
1220 $   THEN
1221 $!
1222 $!    Check To See If The User Wanted To Just LINK.
1223 $!
1224 $     IF (P4.EQS."LINK")
1225 $     THEN
1226 $!
1227 $!      Looks Like LINK-only
1228 $!
1229 $       COMPILER = "LINK"
1230 $!
1231 $!      Tell The User We Are Only Linking.
1232 $!
1233 $       WRITE SYS$OUTPUT "LINK Only.  This actually NOT YET SUPPORTED!"
1234 $!
1235 $!    End LINK Check.
1236 $!
1237 $     ENDIF
1238 $!
1239 $!    Check To See If The User Wanted DECC.
1240 $!
1241 $     IF (P4.EQS."DECC")
1242 $     THEN
1243 $!
1244 $!      Looks Like DECC, Set To Use DECC.
1245 $!
1246 $       COMPILER = "DECC"
1247 $!
1248 $!      Tell The User We Are Using DECC.
1249 $!
1250 $       WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
1251 $!
1252 $!    End DECC Check.
1253 $!
1254 $     ENDIF
1255 $!
1256 $!    Check To See If We Are To Use VAXC.
1257 $!
1258 $     IF (P4.EQS."VAXC")
1259 $     THEN
1260 $!
1261 $!      Looks Like VAXC, Set To Use VAXC.
1262 $!
1263 $       COMPILER = "VAXC"
1264 $!
1265 $!      Tell The User We Are Using VAX C.
1266 $!
1267 $       WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
1268 $!
1269 $!    End VAXC Check
1270 $!
1271 $     ENDIF
1272 $!
1273 $!    Check To See If We Are To Use GNU C.
1274 $!
1275 $     IF (P4.EQS."GNUC")
1276 $     THEN
1277 $!
1278 $!      Looks Like GNUC, Set To Use GNUC.
1279 $!
1280 $       COMPILER = "GNUC"
1281 $!
1282 $!      Tell The User We Are Using GNUC.
1283 $!
1284 $       WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
1285 $!
1286 $!    End The GNU C Check.
1287 $!
1288 $     ENDIF
1289 $!
1290 $!  Else The User Entered An Invalid Argument.
1291 $!
1292 $   ELSE
1293 $!
1294 $!    Tell The User We Don't Know What They Want.
1295 $!
1296 $     WRITE SYS$OUTPUT ""
1297 $     WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
1298 $     WRITE SYS$OUTPUT ""
1299 $     WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
1300 $     WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
1301 $     WRITE SYS$OUTPUT "    GNUC  :  To Compile With GNU C."
1302 $     WRITE SYS$OUTPUT ""
1303 $!
1304 $!    Time To EXIT.
1305 $!
1306 $     GOTO TIDY
1307 $!
1308 $!  End The Valid Argument Check.
1309 $!
1310 $   ENDIF
1311 $!
1312 $! End The P4 Check.
1313 $!
1314 $ ENDIF
1315 $!
1316 $! Time to check the contents of P5, and to make sure we get the correct
1317 $! library.
1318 $!
1319 $ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
1320      .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
1321 $ THEN
1322 $!
1323 $!  Check to see if SOCKETSHR was chosen
1324 $!
1325 $   IF P5.EQS."SOCKETSHR"
1326 $   THEN
1327 $!
1328 $!    Set the library to use SOCKETSHR
1329 $!
1330 $     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
1331 $!
1332 $!    Tell the user
1333 $!
1334 $     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
1335 $!
1336 $!    Done with SOCKETSHR
1337 $!
1338 $   ENDIF
1339 $!
1340 $!  Check to see if MULTINET was chosen
1341 $!
1342 $   IF P5.EQS."MULTINET"
1343 $   THEN
1344 $!
1345 $!    Set the library to use UCX emulation.
1346 $!
1347 $     P5 = "UCX"
1348 $!
1349 $!    Tell the user
1350 $!
1351 $     WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"
1352 $!
1353 $!    Done with MULTINET
1354 $!
1355 $   ENDIF
1356 $!
1357 $!  Check to see if UCX was chosen
1358 $!
1359 $   IF P5.EQS."UCX"
1360 $   THEN
1361 $!
1362 $!    Set the library to use UCX.
1363 $!
1364 $     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
1365 $!
1366 $!    Tell the user
1367 $!
1368 $     WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
1369 $!
1370 $!    Done with UCX
1371 $!
1372 $   ENDIF
1373 $!
1374 $!  Check to see if TCPIP was chosen
1375 $!
1376 $   IF P5.EQS."TCPIP"
1377 $   THEN
1378 $!
1379 $!    Set the library to use TCPIP (post UCX).
1380 $!
1381 $     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
1382 $!
1383 $!    Tell the user
1384 $!
1385 $     WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
1386 $!
1387 $!    Done with TCPIP
1388 $!
1389 $   ENDIF
1390 $!
1391 $!  Check to see if NONE was chosen
1392 $!
1393 $   IF P5.EQS."NONE"
1394 $   THEN
1395 $!
1396 $!    Do not use a TCPIP library.
1397 $!
1398 $     TCPIP_LIB = ""
1399 $!
1400 $!    Tell the user
1401 $!
1402 $     WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
1403 $!
1404 $!    Done with NONE.
1405 $!
1406 $   ENDIF
1407 $!
1408 $!  Set the TCPIP_TYPE symbol
1409 $!
1410 $   TCPIP_TYPE = P5
1411 $!
1412 $!  Print info
1413 $!
1414 $   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
1415 $!
1416 $!  Else The User Entered An Invalid Argument.
1417 $!
1418 $ ELSE
1419 $   IF P5 .NES. ""
1420 $   THEN
1421 $!
1422 $!    Tell The User We Don't Know What They Want.
1423 $!
1424 $     WRITE SYS$OUTPUT ""
1425 $     WRITE SYS$OUTPUT "The Option ",P5," Is Invalid.  The Valid Options Are:"
1426 $     WRITE SYS$OUTPUT ""
1427 $     WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
1428 $     WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
1429 $     WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP TCP/IP (post UCX) library."
1430 $     WRITE SYS$OUTPUT "    NONE       :  To not link with a specific TCP/IP library."
1431 $     WRITE SYS$OUTPUT ""
1432 $!
1433 $!    Time To EXIT.
1434 $!
1435 $     GOTO TIDY
1436 $   ELSE
1437 $!
1438 $! If TCPIP is not defined, then hardcode it to make
1439 $! it clear that no TCPIP is desired.
1440 $!
1441 $     IF P5 .EQS. ""
1442 $     THEN
1443 $       TCPIP_LIB = ""
1444 $       TCPIP_TYPE = "NONE"
1445 $     ELSE
1446 $!
1447 $!    Set the TCPIP_TYPE symbol
1448 $!
1449 $       TCPIP_TYPE = P5
1450 $     ENDIF
1451 $   ENDIF
1452 $!
1453 $!  Done with TCP/IP libraries
1454 $!
1455 $ ENDIF
1456 $!
1457 $! Special Threads For OpenVMS v7.1 Or Later
1458 $!
1459 $! Written By:  Richard Levitte
1460 $!              richard@levitte.org
1461 $!
1462 $!
1463 $! Check To See If We Have A Option For P6.
1464 $!
1465 $ IF (P6.EQS."")
1466 $ THEN
1467 $!
1468 $!  Get The Version Of VMS We Are Using.
1469 $!
1470 $   ISSEVEN :=
1471 $   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
1472 $   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
1473 $!
1474 $!  Check To See If The VMS Version Is v7.1 Or Later.
1475 $!
1476 $   IF (TMP.GE.71)
1477 $   THEN
1478 $!
1479 $!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
1480 $!
1481 $     ISSEVEN := ,PTHREAD_USE_D4
1482 $!
1483 $!  End The VMS Version Check.
1484 $!
1485 $   ENDIF
1486 $!
1487 $! End The P6 Check.
1488 $!
1489 $ ENDIF
1490 $!
1491 $!
1492 $! Check To See If We Have A ZLIB Option.
1493 $!
1494 $ ZLIB = P7
1495 $ IF (ZLIB .NES. "")
1496 $ THEN
1497 $!
1498 $!  Check for expected ZLIB files.
1499 $!
1500 $   err = 0
1501 $   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
1502 $   if (f$search( file1) .eqs. "")
1503 $   then
1504 $     WRITE SYS$OUTPUT ""
1505 $     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
1506 $     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
1507 $     err = 1
1508 $   endif
1509 $!
1510 $   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
1511 $   if (f$search( file2) .eqs. "")
1512 $   then
1513 $     if (err .eq. 0)
1514 $     then
1515 $       WRITE SYS$OUTPUT ""
1516 $       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
1517 $     endif
1518 $     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
1519 $     WRITE SYS$OUTPUT ""
1520 $     err = err+ 2
1521 $   endif
1522 $   if (err .eq. 1)
1523 $   then
1524 $     WRITE SYS$OUTPUT ""
1525 $   endif
1526 $!
1527 $   if (err .ne. 0)
1528 $   then
1529 $     GOTO TIDY
1530 $   endif
1531 $!
1532 $!  Print info
1533 $!
1534 $   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
1535 $!
1536 $! End The ZLIB Check.
1537 $!
1538 $ ENDIF
1539 $!
1540 $!  Time To RETURN...
1541 $!
1542 $ RETURN
1543 $!
1544 $ TIDY:
1545 $!
1546 $! Close any open files.
1547 $!
1548 $ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
1549    close h_file
1550 $!
1551 $! Restore the original default device:[directory].
1552 $!
1553 $ SET DEFAULT 'DEF_ORIG'
1554 $!
1555 $ EXIT
1556 $!