shlib-versions

   1 # This file defines the shared library version numbers we will install.
   2
   3 # The following lines list filename patterns matching canonical configurations,
   4 # and the associated versions to use for various libraries.  The entire
   5 # list is processed, with earlier entries taking precedence over later
   6 # entries.  So loose patterns at the end of the list can give defaults.
   7
   8 # This file can use cpp-style conditionals starting with % instead of #
   9 # to test the symbols defined in config.h by configure.
  10
  11 # In the optional third column, there can one or more symbol set names
  12 # listed, which must be in ascending version order reading left to right
  13 # and must appear in this same order in the Versions.def file.  Each listed
  14 # version subsumes all prior versions back to the previous listed version.
  15
  16 # Configuration         Library=version         Earliest symbol set (optional)
  17 # -------------         ---------------         ------------------------------
  18
  19 # The interface to -lm depends mostly only on cpu, not on operating system.
  20 sparc64-.*-linux.*      libm=6                  GLIBC_2.2
  21 alpha.*-.*-linux.*      libm=6.1
  22 mips.*-.*-linux.*       libm=6                  GLIBC_2.0 GLIBC_2.2
  23 ia64-.*-linux.*         libm=6.1                GLIBC_2.2
  24 sh.*-.*-linux.*         libm=6                  GLIBC_2.2
  25 hppa.*-.*-.*            libm=6                  GLIBC_2.2
  26 s390x-.*-linux.*        libm=6                  GLIBC_2.2
  27 cris-.*-linux.*         libm=6                  GLIBC_2.2
  28 .*-.*-linux.*           libm=6
  29 .*-.*-gnu-gnu.*         libm=6
  30
  31 # We provide libc.so.6 for Linux kernel versions 2.0 and later.
  32 alpha.*-.*-linux.*      libc=6.1
  33 # Working mips versions were never released between 2.0 and 2.2.
  34 mips.*-.*-linux.*       libc=6                  GLIBC_2.0 GLIBC_2.2
  35 ia64-.*-linux.*         libc=6.1                GLIBC_2.2
  36 sh.*-.*-linux.*         libc=6                  GLIBC_2.2
  37 sparc64-.*-linux.*      libc=6                  GLIBC_2.2
  38 hppa.*-.*-.*            libc=6                  GLIBC_2.2
  39 s390x-.*-linux.*        libc=6                  GLIBC_2.2
  40 cris-.*-linux.*         libc=6                  GLIBC_2.2
  41 .*-.*-linux.*           libc=6
  42
  43 # libmachuser.so.1 corresponds to mach/*.defs as of Utah's UK22 release.
  44 .*-.*-gnu-gnu.*         libmachuser=1
  45
  46 # libhurduser.so.0.0 corresponds to hurd/*.defs as of 7 May 1996.
  47 .*-.*-gnu-gnu.*         libhurduser=0.0
  48
  49 # libc.so.0.2 is for the Hurd alpha release 0.2.
  50 %ifdef USE_IN_LIBIO /* experimental only! */
  51 .*-.*-gnu-gnu.*         libc=0.2.90.libio       GLIBC_2.2
  52 %else
  53 .*-.*-gnu-gnu.*         libc=0.2
  54 %endif
  55
  56 # The dynamic loader also requires different names.
  57 i.86-.*-linux.*         ld=ld-linux.so.2
  58 sparc64-.*-linux.*      ld=ld-linux.so.2        GLIBC_2.2
  59 sparc.*-.*-linux.*      ld=ld-linux.so.2
  60 alpha.*-.*-linux.*      ld=ld-linux.so.2
  61 arm.*-.*-linux.*        ld=ld-linux.so.2
  62 sh.*-.*-linux.*         ld=ld-linux.so.2        GLIBC_2.2
  63 ia64-.*-linux.*         ld=ld-linux-ia64.so.2   GLIBC_2.2
  64 mips.*-.*-linux.*       ld=ld.so.1              GLIBC_2.0 GLIBC_2.2
  65 hppa.*-.*-.*            ld=ld.so.1              GLIBC_2.2
  66 s390x-.*-linux.*        ld=ld64.so.1            GLIBC_2.2
  67 cris-.*-linux.*         ld=ld.so.1              GLIBC_2.2
  68 # We use the ELF ABI standard name for the default.
  69 .*-.*-.*                ld=ld.so.1
  70
  71 # The -ldl interface (see <dlfcn.h>) is the same on all platforms.
  72 alpha.*-.*-linux.*      libdl=2.1
  73 mips.*-.*-linux.*       libdl=2                 GLIBC_2.0 GLIBC_2.2
  74 s390x-.*-linux.*        libdl=2                 GLIBC_2.2
  75 cris-.*-linux.*         libdl=2                 GLIBC_2.2
  76 .*-.*-.*                libdl=2
  77
  78 # So far the -lutil interface is the same on all platforms, except for the
  79 # `struct utmp' format, which depends on libc.
  80 alpha.*-.*-linux.*      libutil=1.1
  81 s390x-.*-linux.*        libutil=1               GLIBC_2.2
  82 cris-.*-linux.*         libutil=1               GLIBC_2.2
  83 .*-.*-.*                libutil=1
  84
  85 # Version number 2 is used on other systems for the BIND 4.9.5 resolver
  86 # interface.
  87 alpha.*-.*-linux.*      libresolv=2.1
  88 mips.*-.*-linux.*       libresolv=2             GLIBC_2.0 GLIBC_2.2
  89 .*-.*-.*                libresolv=2
  90
  91 # Interface revision of nss_* modules.  This must match NSS_SHLIB_REVISION
  92 # in nss/nsswitch.h, which determines the library names used for service
  93 # names given in /etc/nsswitch.conf.
  94 mips.*-.*-linux.*       libnss_files=2          GLIBC_2.0 GLIBC_2.2
  95 mips.*-.*-linux.*       libnss_dns=2            GLIBC_2.0 GLIBC_2.2
  96 mips.*-.*-linux.*       libnss_compat=2         GLIBC_2.0 GLIBC_2.2
  97 mips.*-.*-linux.*       libnss_nis=2            GLIBC_2.0 GLIBC_2.2
  98 mips.*-.*-linux.*       libnss_nisplus=2        GLIBC_2.0 GLIBC_2.2
  99 mips.*-.*-linux.*       libnss_ldap=2           GLIBC_2.0 GLIBC_2.2
 100 mips.*-.*-linux.*       libnss_hesiod=2         GLIBC_2.0 GLIBC_2.2
 101 s390x-.*-linux.*        libnss_files=2          GLIBC_2.2
 102 s390x-.*-linux.*        libnss_dns=2            GLIBC_2.2
 103 s390x-.*-linux.*        libnss_compat=2         GLIBC_2.2
 104 s390x-.*-linux.*        libnss_nis=2            GLIBC_2.2
 105 s390x-.*-linux.*        libnss_nisplus=2        GLIBC_2.2
 106 s390x-.*-linux.*        libnss_ldap=2           GLIBC_2.2
 107 s390x-.*-linux.*        libnss_hesiod=2         GLIBC_2.2
 108 cris-.*-linux.*         libnss_files=2          GLIBC_2.2
 109 cris-.*-linux.*         libnss_dns=2            GLIBC_2.2
 110 cris-.*-linux.*         libnss_compat=2         GLIBC_2.2
 111 cris-.*-linux.*         libnss_nis=2            GLIBC_2.2
 112 cris-.*-linux.*         libnss_nisplus=2        GLIBC_2.2
 113 cris-.*-linux.*         libnss_ldap=2           GLIBC_2.2
 114 cris-.*-linux.*         libnss_hesiod=2         GLIBC_2.2
 115 .*-.*-.*                libnss_files=2
 116 .*-.*-.*                libnss_dns=2
 117 .*-.*-.*                libnss_compat=2
 118 .*-.*-.*                libnss_nis=2
 119 .*-.*-.*                libnss_nisplus=2
 120 .*-.*-.*                libnss_ldap=2
 121 .*-.*-.*                libnss_hesiod=2
 122
 123 # Version for libnsl with YP and NIS+ functions.
 124 alpha.*-.*-linux.*      libnsl=1.1
 125 mips.*-.*-linux.*       libnsl=1                GLIBC_2.0 GLIBC_2.2
 126 s390x-.*-linux.*        libnsl=1                GLIBC_2.2
 127 cris-.*-linux.*         libnsl=1                GLIBC_2.2
 128 .*-.*-.*                libnsl=1
 129
 130 # This defines the shared library version numbers we will install.
 131 alpha.*-.*-linux.*      libcrypt=1.1
 132 s390x-.*-linux.*        libcrypt=1              GLIBC_2.2
 133 cris-.*-linux.*         libcrypt=1              GLIBC_2.2
 134 .*-.*-.*                libcrypt=1
 135
 136 # The gross patch for programs assuming broken locale implementations.
 137 alpha.*-.*-linux.*      libBrokenLocale=1.1
 138 ia64-.*-.*              libBrokenLocale=1       GLIBC_2.2
 139 sh.*-.*-.*              libBrokenLocale=1       GLIBC_2.2
 140 sparc64-.*-.*           libBrokenLocale=1       GLIBC_2.2
 141 hppa-.*-.*              libBrokenLocale=1       GLIBC_2.2
 142 s390x-.*-linux.*        libBrokenLocale=1       GLIBC_2.2
 143 cris-.*-linux.*         libBrokenLocale=1       GLIBC_2.2
 144 .*-.*-.*                libBrokenLocale=1
 145
 146 # The real-time library from POSIX.1b.
 147 mips.*-.*-linux.*       librt=1                 GLIBC_2.0 GLIBC_2.2
 148 s390x-.*-linux.*        librt=1                 GLIBC_2.2
 149 cris-.*-linux.*         librt=1                 GLIBC_2.2
 150 .*-.*-.*                librt=1
 151
 152 # The asynchronous name lookup library.
 153 .*-.*-.*                libanl=1