test/recipes/80-test_ssl.t

   1 #! /usr/bin/perl
   2
   3 use strict;
   4 use warnings;
   5
   6 use POSIX;
   7 use File::Spec;
   8 use File::Copy;
   9 use OpenSSL::Test qw/:DEFAULT with top_file cmdstr/;
  10 use OpenSSL::Test::Utils;
  11
  12 setup("test_ssl");
  13
  14 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk) =
  15     disabled qw/rsa dsa dh ec srp psk/;
  16
  17 my $digest = "-sha1";
  18 my @reqcmd = ("openssl", "req");
  19 my @x509cmd = ("openssl", "x509", $digest);
  20 my @verifycmd = ("openssl", "verify");
  21 my $dummycnf = top_file("apps", "openssl.cnf");
  22
  23 my $CAkey = "keyCA.ss";
  24 my $CAcert="certCA.ss";
  25 my $CAserial="certCA.srl";
  26 my $CAreq="reqCA.ss";
  27 my $CAconf=top_file("test","CAss.cnf");
  28 my $CAreq2="req2CA.ss"; # temp
  29
  30 my $Uconf=top_file("test","Uss.cnf");
  31 my $Ukey="keyU.ss";
  32 my $Ureq="reqU.ss";
  33 my $Ucert="certU.ss";
  34
  35 my $Dkey="keyD.ss";
  36 my $Dreq="reqD.ss";
  37 my $Dcert="certD.ss";
  38
  39 my $Ekey="keyE.ss";
  40 my $Ereq="reqE.ss";
  41 my $Ecert="certE.ss";
  42
  43 my $P1conf=top_file("test","P1ss.cnf");
  44 my $P1key="keyP1.ss";
  45 my $P1req="reqP1.ss";
  46 my $P1cert="certP1.ss";
  47 my $P1intermediate="tmp_intP1.ss";
  48
  49 my $P2conf=top_file("test","P2ss.cnf");
  50 my $P2key="keyP2.ss";
  51 my $P2req="reqP2.ss";
  52 my $P2cert="certP2.ss";
  53 my $P2intermediate="tmp_intP2.ss";
  54
  55 plan tests =>
  56     1                           # For testss
  57     + 1                         # For ssltest -test_cipherlist
  58     + 8                         # For the first testssl
  59     + 16                        # For the first testsslproxy
  60     + 16                        # For the second testsslproxy
  61     ;
  62
  63 subtest 'test_ss' => sub {
  64     if (testss()) {
  65         open OUT, ">", "intP1.ss";
  66         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
  67         close OUT;
  68
  69         open OUT, ">", "intP2.ss";
  70         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
  71         close OUT;
  72     }
  73 };
  74
  75 my $check = ok(run(test(["ssltest","-test_cipherlist"])), "running ssltest");
  76
  77   SKIP: {
  78       skip "ssltest ended with error, skipping the rest", 3
  79           if !$check;
  80
  81       note('test_ssl -- key U');
  82       testssl("keyU.ss", $Ucert, $CAcert);
  83
  84       note('test_ssl -- key P1');
  85       testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
  86
  87       note('test_ssl -- key P2');
  88       testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
  89     }
  90
  91 # -----------
  92 # subtest functions
  93 sub testss {
  94     open RND, ">>", ".rnd";
  95     print RND "string to make the random number generator think it has entropy";
  96     close RND;
  97
  98     my @req_dsa = ("-newkey",
  99                    "dsa:".File::Spec->catfile("..", "apps", "dsa1024.pem"));;
 100     my @req_new;
 101     if ($no_rsa) {
 102         @req_new = @req_dsa;
 103     } else {
 104         @req_new = ("-new");
 105     }
 106
 107     plan tests => 17;
 108
 109   SKIP: {
 110       skip 'failure', 16 unless
 111           ok(run(app([@reqcmd, "-config", $CAconf,
 112                       "-out", $CAreq, "-keyout", $CAkey,
 113                       @req_new])),
 114              'make cert request');
 115
 116       skip 'failure', 15 unless
 117           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
 118                       "-req", "-out", $CAcert, "-signkey", $CAkey,
 119                       "-extfile", $CAconf, "-extensions", "v3_ca"],
 120                      stdout => "err.ss")),
 121              'convert request into self-signed cert');
 122
 123       skip 'failure', 14 unless
 124           ok(run(app([@x509cmd, "-in", $CAcert,
 125                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
 126                      stdout => "err.ss")),
 127              'convert cert into a cert request');
 128
 129       skip 'failure', 13 unless
 130           ok(run(app([@reqcmd, "-config", $dummycnf,
 131                       "-verify", "-in", $CAreq, "-noout"])),
 132              'verify request 1');
 133
 134
 135       skip 'failure', 12 unless
 136           ok(run(app([@reqcmd, "-config", $dummycnf,
 137                       "-verify", "-in", $CAreq2, "-noout"])),
 138              'verify request 2');
 139
 140       skip 'failure', 11 unless
 141           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
 142              'verify signature');
 143
 144       skip 'failure', 10 unless
 145           ok(run(app([@reqcmd, "-config", $Uconf,
 146                       "-out", $Ureq, "-keyout", $Ukey, @req_new],
 147                      stdout => "err.ss")),
 148              'make a user cert request');
 149
 150       skip 'failure', 9 unless
 151           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
 152                       "-req", "-out", $Ucert,
 153                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
 154                       "-extfile", $Uconf, "-extensions", "v3_ee"],
 155                      stdout => "err.ss"))
 156              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
 157              'sign user cert request');
 158
 159       skip 'failure', 8 unless
 160           ok(run(app([@x509cmd,
 161                       "-subject", "-issuer", "-startdate", "-enddate",
 162                       "-noout", "-in", $Ucert])),
 163              'Certificate details');
 164
 165       skip 'failure', 7 unless
 166           subtest 'DSA certificate creation' => sub {
 167               plan skip_all => "skipping DSA certificate creation"
 168                   if $no_dsa;
 169
 170               plan tests => 4;
 171
 172             SKIP: {
 173                 $ENV{CN2} = "DSA Certificate";
 174                 skip 'failure', 3 unless
 175                     ok(run(app([@reqcmd, "-config", $Uconf,
 176                                 "-out", $Dreq, "-keyout", $Dkey,
 177                                 @req_dsa],
 178                                stdout => "err.ss")),
 179                        "make a DSA user cert request");
 180                 skip 'failure', 2 unless
 181                     ok(run(app([@x509cmd, "-CAcreateserial",
 182                                 "-in", $Dreq,
 183                                 "-days", "30",
 184                                 "-req",
 185                                 "-out", $Dcert,
 186                                 "-CA", $CAcert, "-CAkey", $CAkey,
 187                                 "-CAserial", $CAserial,
 188                                 "-extfile", $Uconf,
 189                                 "-extensions", "v3_ee_dsa"],
 190                                stdout => "err.ss")),
 191                        "sign DSA user cert request");
 192                 skip 'failure', 1 unless
 193                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
 194                        "verify DSA user cert");
 195                 skip 'failure', 0 unless
 196                     ok(run(app([@x509cmd,
 197                                 "-subject", "-issuer",
 198                                 "-startdate", "-enddate", "-noout",
 199                                 "-in", $Dcert])),
 200                        "DSA Certificate details");
 201               }
 202       };
 203
 204       skip 'failure', 6 unless
 205           subtest 'ECDSA/ECDH certificate creation' => sub {
 206               plan skip_all => "skipping ECDSA/ECDH certificate creation"
 207                   if $no_ec;
 208
 209               plan tests => 5;
 210
 211             SKIP: {
 212                 $ENV{CN2} = "ECDSA Certificate";
 213                 skip 'failure', 4 unless
 214                     ok(run(app(["openssl", "ecparam", "-name", "P-256",
 215                                 "-out", "ecp.ss"])),
 216                        "make EC parameters");
 217                 skip 'failure', 3 unless
 218                     ok(run(app([@reqcmd, "-config", $Uconf,
 219                                 "-out", $Ereq, "-keyout", $Ekey,
 220                                 "-newkey", "ec:ecp.ss"],
 221                                stdout => "err.ss")),
 222                        "make a ECDSA/ECDH user cert request");
 223                 skip 'failure', 2 unless
 224                     ok(run(app([@x509cmd, "-CAcreateserial",
 225                                 "-in", $Ereq,
 226                                 "-days", "30",
 227                                 "-req",
 228                                 "-out", $Ecert,
 229                                 "-CA", $CAcert, "-CAkey", $CAkey,
 230                                 "-CAserial", $CAserial,
 231                                 "-extfile", $Uconf,
 232                                 "-extensions", "v3_ee_ec"],
 233                                stdout => "err.ss")),
 234                        "sign ECDSA/ECDH user cert request");
 235                 skip 'failure', 1 unless
 236                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
 237                        "verify ECDSA/ECDH user cert");
 238                 skip 'failure', 0 unless
 239                     ok(run(app([@x509cmd,
 240                                 "-subject", "-issuer",
 241                                 "-startdate", "-enddate", "-noout",
 242                                 "-in", $Ecert])),
 243                        "ECDSA Certificate details");
 244               }
 245       };
 246
 247       skip 'failure', 5 unless
 248           ok(run(app([@reqcmd, "-config", $P1conf,
 249                       "-out", $P1req, "-keyout", $P1key, @req_new],
 250                      stdout => "err.ss")),
 251              'make a proxy cert request');
 252
 253
 254       skip 'failure', 4 unless
 255           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
 256                       "-req", "-out", $P1cert,
 257                       "-CA", $Ucert, "-CAkey", $Ukey,
 258                       "-extfile", $P1conf, "-extensions", "v3_proxy"],
 259                      stdout => "err.ss")),
 260              'sign proxy with user cert');
 261
 262       copy($Ucert, $P1intermediate);
 263       run(app([@verifycmd, "-CAfile", $CAcert,
 264                "-untrusted", $P1intermediate, $P1cert]));
 265       ok(run(app([@x509cmd,
 266                   "-subject", "-issuer", "-startdate", "-enddate",
 267                   "-noout", "-in", $P1cert])),
 268          'Certificate details');
 269
 270       skip 'failure', 2 unless
 271           ok(run(app([@reqcmd, "-config", $P2conf,
 272                       "-out", $P2req, "-keyout", $P2key,
 273                       @req_new],
 274                      stdout => "err.ss")),
 275              'make another proxy cert request');
 276
 277
 278       skip 'failure', 1 unless
 279           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
 280                       "-req", "-out", $P2cert,
 281                       "-CA", $P1cert, "-CAkey", $P1key,
 282                       "-extfile", $P2conf, "-extensions", "v3_proxy"],
 283                      stdout => "err.ss")),
 284              'sign second proxy cert request with the first proxy cert');
 285
 286
 287       open OUT, ">", $P2intermediate;
 288       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
 289       close OUT;
 290       run(app([@verifycmd, "-CAfile", $CAcert,
 291                "-untrusted", $P2intermediate, $P2cert]));
 292       ok(run(app([@x509cmd,
 293                   "-subject", "-issuer", "-startdate", "-enddate",
 294                   "-noout", "-in", $P2cert])),
 295          'Certificate details');
 296     }
 297 }
 298
 299 sub testssl {
 300     my $key = shift || top_file("apps","server.pem");
 301     my $cert = shift || top_file("apps","server.pem");
 302     my $CAtmp = shift;
 303     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
 304     my @extra = @_;
 305
 306     my @ssltest = ("ssltest",
 307                    "-s_key", $key, "-s_cert", $cert,
 308                    "-c_key", $key, "-c_cert", $cert);
 309
 310     my $serverinfo = top_file("test","serverinfo.pem");
 311
 312     my $dsa_cert = 0;
 313     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
 314                                         "-text", "-noout"]), capture => 1)) {
 315         $dsa_cert = 1;
 316     }
 317
 318
 319     # plan tests => 7;
 320
 321     subtest 'standard SSL tests' => sub {
 322         ######################################################################
 323         plan tests => 27;
 324
 325         ok(run(test([@ssltest, "-ssl3", @extra])),
 326            'test sslv3');
 327         ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
 328            'test sslv3 with server authentication');
 329         ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
 330            'test sslv3 with client authentication');
 331         ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
 332            'test sslv3 with both server and client authentication');
 333         ok(run(test([@ssltest, @extra])),
 334            'test sslv2/sslv3');
 335         ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
 336            'test sslv2/sslv3 with server authentication');
 337         ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
 338            'test sslv2/sslv3 with client authentication');
 339         ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
 340            'test sslv2/sslv3 with both server and client authentication');
 341         ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
 342            'test sslv3 via BIO pair');
 343         ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
 344            'test sslv3 with server authentication via BIO pair');
 345         ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
 346            'test sslv3 with client authentication via BIO pair');
 347         ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
 348            'test sslv3 with both server and client authentication via BIO pair');
 349         ok(run(test([@ssltest, "-bio_pair", @extra])),
 350            'test sslv2/sslv3 via BIO pair');
 351         ok(run(test([@ssltest, "-dtls1", @extra])),
 352            'test dtlsv1');
 353         ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
 354            'test dtlsv1 with server authentication');
 355         ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
 356            'test dtlsv1 with client authentication');
 357         ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
 358            'test dtlsv1 with both server and client authentication');
 359         ok(run(test([@ssltest, "-dtls12", @extra])),
 360            'test dtlsv1.2');
 361         ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
 362            'test dtlsv1.2 with server authentication');
 363         ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
 364            'test dtlsv1.2 with client authentication');
 365         ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
 366            'test dtlsv1.2 with both server and client authentication');
 367         {
 368           SKIP: {
 369               skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
 370
 371               ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
 372                  'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
 373             }
 374         }
 375         ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
 376            'test sslv2/sslv3 with 1024bit DHE via BIO pair');
 377         ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
 378            'test sslv2/sslv3 with server authentication');
 379         ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
 380            'test sslv2/sslv3 with client authentication via BIO pair');
 381         ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
 382            'test sslv2/sslv3 with both client and server authentication via BIO pair');
 383         ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
 384            'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
 385     };
 386
 387     subtest "Testing ciphersuites" => sub {
 388
 389         my @exkeys = ();
 390         my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
 391
 392         if ($no_dh) {
 393             note "skipping DHE tests\n";
 394             $ciphers .= ":-kDHE";
 395         }
 396         if ($no_dsa) {
 397             note "skipping DSA tests\n";
 398             $ciphers .= ":-aDSA";
 399         } else {
 400             push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
 401         }
 402
 403         if ($no_ec) {
 404             note "skipping EC tests\n";
 405             $ciphers .= ":!aECDSA:!kECDH";
 406         } else {
 407             push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
 408         }
 409
 410         my @protocols = ("TLSv1.2", "SSLv3");
 411         my $protocolciphersuitcount = 0;
 412         my %ciphersuites =
 413             map { my @c =
 414                       map { split(/:/, $_) }
 415                       run(app(["openssl", "ciphers", "${_}:$ciphers"]),
 416                           capture => 1);
 417                   chomp @c;
 418                   $protocolciphersuitcount += scalar @c;
 419                   $_ => [ @c ] } @protocols;
 420
 421         # The count of protocols is because in addition to the ciphersuits
 422         # we got above, we're running a weak DH test for each protocol
 423         plan tests => $protocolciphersuitcount + scalar(@protocols);
 424
 425         foreach my $protocol (@protocols) {
 426             note "Testing ciphersuites for $protocol";
 427             foreach my $cipher (@{$ciphersuites{$protocol}}) {
 428                 ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
 429                              $protocol eq "SSLv3" ? ("-ssl3") : ()])),
 430                    "Testing $cipher");
 431             }
 432             is(run(test([@ssltest,
 433                          "-s_cipher", "EDH",
 434                          "-c_cipher", 'EDH:@SECLEVEL=1',
 435                          "-dhe512",
 436                          $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
 437                "testing connection with weak DH, expecting failure");
 438         }
 439     };
 440
 441     subtest 'RSA/(EC)DHE/PSK tests' => sub {
 442         ######################################################################
 443
 444         plan tests => 5;
 445
 446         {
 447           SKIP: {
 448               skip "skipping anonymous DH tests", 1
 449                   if ($no_dh);
 450
 451               ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
 452                  'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
 453             }
 454         }
 455
 456         {
 457           SKIP: {
 458               skip "skipping RSA tests", 2
 459                   if $no_rsa;
 460
 461               ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
 462                  'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
 463
 464               skip "skipping RSA+DHE tests", 1
 465                   if $no_dh;
 466
 467               ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
 468                  'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
 469             }
 470         }
 471         ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
 472            'test tls1 with PSK');
 473
 474         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
 475            'test tls1 with PSK via BIO pair');
 476     };
 477
 478     subtest 'Next Protocol Negotiation Tests' => sub {
 479         ######################################################################
 480
 481         plan tests => 7;
 482
 483         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
 484         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
 485         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
 486         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
 487         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
 488         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
 489         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
 490     };
 491
 492     subtest 'Custom Extension tests' => sub {
 493         ######################################################################
 494
 495         plan tests => 1;
 496
 497         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
 498            'test tls1 with custom extensions');
 499     };
 500
 501     subtest 'Serverinfo tests' => sub {
 502         ######################################################################
 503
 504         plan tests => 5;
 505
 506         note('echo test tls1 with serverinfo');
 507         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
 508         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
 509         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
 510         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 511         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 512     };
 513
 514     subtest 'ALPN tests' => sub {
 515         ######################################################################
 516
 517         plan tests => 12;
 518
 519         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
 520         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
 521         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
 522         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
 523         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
 524         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
 525         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
 526         ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
 527
 528         {
 529           SKIP: {
 530               skip "skipping SRP tests", 4
 531                   if $no_srp;
 532
 533               ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
 534                  'test tls1 with SRP');
 535
 536               ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
 537                  'test tls1 with SRP via BIO pair');
 538
 539               ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
 540                  'test tls1 with SRP auth');
 541
 542               ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
 543                  'test tls1 with SRP auth via BIO pair');
 544             }
 545         }
 546     };
 547
 548     subtest 'Multi-buffer tests' => sub {
 549         ######################################################################
 550
 551         plan tests => 2;
 552
 553         {
 554           SKIP: {
 555               skip "skipping multi-buffer tests", 2
 556                   if @extra || (POSIX::uname())[4] ne "x86_64";
 557               ok(run(test([@ssltest, "-cipher", "AES128-SHA",    "-bytes", "8m"])));
 558               ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
 559             }
 560         }
 561     };
 562 }
 563
 564 sub testsslproxy {
 565     my $key = shift || top_file("apps","server.pem");
 566     my $cert = shift || top_file("apps","server.pem");
 567     my $CAtmp = shift;
 568     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
 569     my @extra = @_;
 570
 571     my @ssltest = ("ssltest",
 572                    "-s_key", $key, "-s_cert", $cert,
 573                    "-c_key", $key, "-c_cert", $cert);
 574
 575     # plan tests => 16;
 576
 577     note('Testing a lot of proxy conditions.');
 578
 579     # We happen to know that certP1.ss has policy letters "AB" and
 580     # certP2.ss has policy letters "BC".  However, because certP2.ss
 581     # has certP1.ss as issuer, when it's used, both their policy
 582     # letters get combined into just "B".
 583     # The policy letter(s) then get filtered with the given auth letter
 584     # in the table below, and the result gets tested with the given
 585     # condition.  For details, read ssltest.c
 586     #
 587     # certfilename => [ [ auth, cond, expected result ] ... ]
 588     my %expected = ( "certP1.ss" => [ [ [ 'A',  'A'      ], 1 ],
 589                                       [ [ 'A',  'B'      ], 0 ],
 590                                       [ [ 'A',  'C'      ], 0 ],
 591                                       [ [ 'A',  'A|B&!C' ], 1 ],
 592                                       [ [ 'B',  'A'      ], 0 ],
 593                                       [ [ 'B',  'B'      ], 1 ],
 594                                       [ [ 'B',  'C'      ], 0 ],
 595                                       [ [ 'B',  'A|B&!C' ], 1 ],
 596                                       [ [ 'C',  'A'      ], 0 ],
 597                                       [ [ 'C',  'B'      ], 0 ],
 598                                       [ [ 'C',  'C'      ], 0 ],
 599                                       [ [ 'C',  'A|B&!C' ], 0 ],
 600                                       [ [ 'BC', 'A'      ], 0 ],
 601                                       [ [ 'BC', 'B'      ], 1 ],
 602                                       [ [ 'BC', 'C'      ], 0 ],
 603                                       [ [ 'BC', 'A|B&!C' ], 1 ] ],
 604                      "certP2.ss" => [ [ [ 'A',  'A'      ], 0 ],
 605                                       [ [ 'A',  'B'      ], 0 ],
 606                                       [ [ 'A',  'C'      ], 0 ],
 607                                       [ [ 'A',  'A|B&!C' ], 0 ],
 608                                       [ [ 'B',  'A'      ], 0 ],
 609                                       [ [ 'B',  'B'      ], 1 ],
 610                                       [ [ 'B',  'C'      ], 0 ],
 611                                       [ [ 'B',  'A|B&!C' ], 1 ],
 612                                       [ [ 'C',  'A'      ], 0 ],
 613                                       [ [ 'C',  'B'      ], 0 ],
 614                                       [ [ 'C',  'C'      ], 0 ],
 615                                       [ [ 'C',  'A|B&!C' ], 0 ],
 616                                       [ [ 'BC', 'A'      ], 0 ],
 617                                       [ [ 'BC', 'B'      ], 1 ],
 618                                       [ [ 'BC', 'C'      ], 0 ],
 619                                       [ [ 'BC', 'A|B&!C' ], 1 ] ] );
 620
 621     foreach (@{$expected{$cert}}) {
 622         my $auth = $_->[0]->[0];
 623         my $cond = $_->[0]->[1];
 624         my $res  = $_->[1];
 625         is(run(test([@ssltest, "-ssl3", "-server_auth", @CA,
 626                      "-proxy", "-proxy_auth", $auth,
 627                      "-proxy_cond", $cond])), $res,
 628            "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
 629            .($res ? "success" : "failure").")");
 630     }
 631 }