test/recipes/80-test_ssl_new.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use File::Basename;
  14 use File::Compare qw/compare_text/;
  15 use OpenSSL::Glob;
  16 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file/;
  17 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
  18
  19 setup("test_ssl_new");
  20
  21 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
  22 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
  23
  24 my @conf_srcs =  glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
  25 map { s/;.*// } @conf_srcs if $^O eq "VMS";
  26 my @conf_files = map { basename($_, ".in") } @conf_srcs;
  27 map { s/\^// } @conf_files if $^O eq "VMS";
  28
  29 # We hard-code the number of tests to double-check that the globbing above
  30 # finds all files as expected.
  31 plan tests => 30;  # = scalar @conf_srcs
  32
  33 # Some test results depend on the configuration of enabled protocols. We only
  34 # verify generated sources in the default configuration.
  35 my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
  36                       !disabled("tls1_1") && !disabled("tls1_2") &&
  37                       !disabled("tls1_3"));
  38
  39 my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
  40
  41 my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
  42 my $no_tls = alldisabled(available_protocols("tls"));
  43 my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3"));
  44 my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
  45 my $no_dtls = alldisabled(available_protocols("dtls"));
  46 my $no_npn = disabled("nextprotoneg");
  47 my $no_ct = disabled("ct");
  48 my $no_ec = disabled("ec");
  49 my $no_dh = disabled("dh");
  50 my $no_dsa = disabled("dsa");
  51 my $no_ec2m = disabled("ec2m");
  52 my $no_ocsp = disabled("ocsp");
  53
  54 # Add your test here if the test conf.in generates test cases and/or
  55 # expectations dynamically based on the OpenSSL compile-time config.
  56 my %conf_dependent_tests = (
  57   "02-protocol-version.cnf" => !$is_default_tls,
  58   "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
  59                            || !disabled("sctp"),
  60   "05-sni.cnf" => disabled("tls1_1"),
  61   "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
  62   "10-resumption.cnf" => !$is_default_tls || $no_ec,
  63   "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
  64   "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
  65   "17-renegotiate.cnf" => disabled("tls1_2"),
  66   "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
  67   "19-mac-then-encrypt.cnf" => !$is_default_tls,
  68   "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
  69   "22-compression.cnf" => !$is_default_tls,
  70   "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
  71   "27-ticket-appdata.cnf" => !$is_default_tls,
  72   "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
  73   "30-extended-master-secret.cnf" => disabled("tls1_2"),
  74 );
  75
  76 # Add your test here if it should be skipped for some compile-time
  77 # configurations. Default is $no_tls but some tests have different skip
  78 # conditions.
  79 my %skip = (
  80   "06-sni-ticket.cnf" => $no_tls_below1_3,
  81   "07-dtls-protocol-version.cnf" => $no_dtls,
  82   "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
  83                     && disabled("tls1_2")) || $no_npn,
  84   "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
  85   "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
  86   "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
  87   # We could run some of these tests without TLS 1.2 if we had a per-test
  88   # disable instruction but that's a bizarre configuration not worth
  89   # special-casing for.
  90   # TODO(TLS 1.3): We should review this once we have TLS 1.3.
  91   "13-fragmentation.cnf" => disabled("tls1_2"),
  92   "14-curves.cnf" => disabled("tls1_2") || $no_ec || $no_ec2m,
  93   "15-certstatus.cnf" => $no_tls || $no_ocsp,
  94   "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
  95   "17-renegotiate.cnf" => $no_tls_below1_3,
  96   "18-dtls-renegotiate.cnf" => $no_dtls,
  97   "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
  98   "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
  99   "21-key-update.cnf" => disabled("tls1_3"),
 100   "22-compression.cnf" => disabled("zlib") || $no_tls,
 101   "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
 102                     && disabled("tls1_2")) || disabled("srp"),
 103   "24-padding.cnf" => disabled("tls1_3"),
 104   "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
 105   "26-tls13_client_auth.cnf" => disabled("tls1_3"),
 106   "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
 107 );
 108
 109 foreach my $conf (@conf_files) {
 110     subtest "Test configuration $conf" => sub {
 111         test_conf($conf,
 112                   $conf_dependent_tests{$conf} || $^O eq "VMS" ?  0 : 1,
 113                   defined($skip{$conf}) ? $skip{$conf} : $no_tls);
 114     }
 115 }
 116
 117 sub test_conf {
 118     plan tests => 3;
 119
 120     my ($conf, $check_source, $skip) = @_;
 121
 122     my $conf_file = srctop_file("test", "ssl-tests", $conf);
 123     my $input_file = $conf_file . ".in";
 124     my $output_file = $conf;
 125     my $run_test = 1;
 126
 127   SKIP: {
 128       # "Test" 1. Generate the source.
 129       skip 'failure', 2 unless
 130         ok(run(perltest(["generate_ssl_tests.pl", $input_file],
 131                         interpreter_args => [ "-I", srctop_dir("util", "perl")],
 132                         stdout => $output_file)),
 133            "Getting output from generate_ssl_tests.pl.");
 134
 135     SKIP: {
 136         # Test 2. Compare against existing output in test/ssl_tests.cnf.
 137         skip "Skipping generated source test for $conf", 1
 138           if !$check_source;
 139
 140         $run_test = is(cmp_text($output_file, $conf_file), 0,
 141                        "Comparing generated sources.");
 142       }
 143
 144       # Test 3. Run the test.
 145       skip "No tests available; skipping tests", 1 if $skip;
 146       skip "Stale sources; skipping tests", 1 if !$run_test;
 147
 148       ok(run(test(["ssl_test", $output_file])), "running ssl_test $conf");
 149     }
 150 }
 151
 152 sub cmp_text {
 153     return compare_text(@_, sub {
 154         $_[0] =~ s/\R//g;
 155         $_[1] =~ s/\R//g;
 156         return $_[0] ne $_[1];
 157     });
 158 }