test/recipes/80-test_ssl_old.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use POSIX;
  14 use File::Basename;
  15 use File::Copy;
  16 use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr data_file/;
  17 use OpenSSL::Test::Utils;
  18
  19 BEGIN {
  20 setup("test_ssl_old");
  21 }
  22
  23 use lib srctop_dir('Configurations');
  24 use lib bldtop_dir('.');
  25
  26 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
  27 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
  28     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
  29     $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
  30     anydisabled qw/rsa dsa dh ec psk
  31                    ssl3 tls1 tls1_1 tls1_2 tls1_3
  32                    dtls dtls1 dtls1_2 ct/;
  33 #If ec and dh are disabled then don't use TLSv1.3
  34 $no_tls1_3 = 1 if (!$no_tls1_3 && $no_ec && $no_dh);
  35 my $no_anytls = alldisabled(available_protocols("tls"));
  36 my $no_anydtls = alldisabled(available_protocols("dtls"));
  37
  38 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
  39     if $no_anytls && $no_anydtls;
  40
  41 my $digest = "-sha1";
  42 my @reqcmd = ("openssl", "req");
  43 my @x509cmd = ("openssl", "x509", $digest);
  44 my @verifycmd = ("openssl", "verify");
  45 my @genpkeycmd = ("openssl", "genpkey");
  46 my $dummycnf = srctop_file("apps", "openssl.cnf");
  47
  48 my $cnf = srctop_file("test", "ca-and-certs.cnf");
  49 my $CAkey = "keyCA.ss";
  50 my $CAcert="certCA.ss";
  51 my $CAserial="certCA.srl";
  52 my $CAreq="reqCA.ss";
  53 my $CAreq2="req2CA.ss"; # temp
  54 my $Ukey="keyU.ss";
  55 my $Ureq="reqU.ss";
  56 my $Ucert="certU.ss";
  57 my $Dkey="keyD.ss";
  58 my $Dreq="reqD.ss";
  59 my $Dcert="certD.ss";
  60 my $Ekey="keyE.ss";
  61 my $Ereq="reqE.ss";
  62 my $Ecert="certE.ss";
  63
  64 my $proxycnf=srctop_file("test", "proxy.cnf");
  65 my $P1key="keyP1.ss";
  66 my $P1req="reqP1.ss";
  67 my $P1cert="certP1.ss";
  68 my $P1intermediate="tmp_intP1.ss";
  69 my $P2key="keyP2.ss";
  70 my $P2req="reqP2.ss";
  71 my $P2cert="certP2.ss";
  72 my $P2intermediate="tmp_intP2.ss";
  73
  74 my $server_sess="server.ss";
  75 my $client_sess="client.ss";
  76
  77 # ssl_old_test.c is deprecated in favour of the new framework in ssl_test.c
  78 # If you're adding tests here, you probably want to convert them to the
  79 # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
  80 plan tests =>
  81    ($no_fips ? 0 : 5)     # testssl with fips provider
  82     + 1                   # For testss
  83     + 5                   # For the testssl with default provider
  84     ;
  85
  86 subtest 'test_ss' => sub {
  87     if (testss()) {
  88         open OUT, ">", "intP1.ss";
  89         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
  90         close OUT;
  91
  92         open OUT, ">", "intP2.ss";
  93         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
  94         close OUT;
  95     }
  96 };
  97
  98 note('test_ssl_old -- key U');
  99 my $configfile = srctop_file("test","default-and-legacy.cnf");
 100 if (disabled("legacy")) {
 101     $configfile = srctop_file("test","default.cnf");
 102 }
 103
 104 testssl($Ukey, $Ucert, $CAcert, "default", $configfile);
 105 unless ($no_fips) {
 106     testssl($Ukey, $Ucert, $CAcert, "fips",
 107             srctop_file("test","fips-and-base.cnf"));
 108 }
 109
 110 # -----------
 111 # subtest functions
 112 sub testss {
 113     my @req_dsa = ("-newkey",
 114                    "dsa:".data_file("dsa2048.pem"));
 115     my $dsaparams = data_file("dsa2048.pem");
 116     my @req_new;
 117     if ($no_rsa) {
 118         @req_new = @req_dsa;
 119     } else {
 120         @req_new = ("-new");
 121     }
 122
 123     plan tests => 17;
 124
 125   SKIP: {
 126       skip 'failure', 16 unless
 127           ok(run(app([@reqcmd, "-config", $cnf,
 128                       "-out", $CAreq, "-keyout", $CAkey,
 129                       @req_new])),
 130              'make cert request');
 131
 132       skip 'failure', 15 unless
 133           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
 134                       "-req", "-out", $CAcert, "-signkey", $CAkey,
 135                       "-extfile", $cnf, "-extensions", "v3_ca"],
 136                      stdout => "err.ss")),
 137              'convert request into self-signed cert');
 138
 139       skip 'failure', 14 unless
 140           ok(run(app([@x509cmd, "-in", $CAcert,
 141                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
 142                      stdout => "err.ss")),
 143              'convert cert into a cert request');
 144
 145       skip 'failure', 13 unless
 146           ok(run(app([@reqcmd, "-config", $dummycnf,
 147                       "-verify", "-in", $CAreq, "-noout"])),
 148              'verify request 1');
 149
 150
 151       skip 'failure', 12 unless
 152           ok(run(app([@reqcmd, "-config", $dummycnf,
 153                       "-verify", "-in", $CAreq2, "-noout"])),
 154              'verify request 2');
 155
 156       skip 'failure', 11 unless
 157           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
 158              'verify signature');
 159
 160       skip 'failure', 10 unless
 161           ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
 162                       "-out", $Ureq, "-keyout", $Ukey, @req_new],
 163                      stdout => "err.ss")),
 164              'make a user cert request');
 165
 166       skip 'failure', 9 unless
 167           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
 168                       "-req", "-out", $Ucert,
 169                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
 170                       "-extfile", $cnf, "-extensions", "v3_ee"],
 171                      stdout => "err.ss"))
 172              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
 173              'sign user cert request');
 174
 175       skip 'failure', 8 unless
 176           ok(run(app([@x509cmd,
 177                       "-subject", "-issuer", "-startdate", "-enddate",
 178                       "-noout", "-in", $Ucert])),
 179              'Certificate details');
 180
 181       skip 'failure', 7 unless
 182           subtest 'DSA certificate creation' => sub {
 183               plan skip_all => "skipping DSA certificate creation"
 184                   if $no_dsa;
 185
 186               plan tests => 5;
 187
 188             SKIP: {
 189                 $ENV{CN2} = "DSA Certificate";
 190                 skip 'failure', 4 unless
 191                     ok(run(app([@genpkeycmd, "-out", $Dkey,
 192                                 "-paramfile", $dsaparams],
 193                                stdout => "err.ss")),
 194                        "make a DSA key");
 195                 skip 'failure', 3 unless
 196                     ok(run(app([@reqcmd, "-new", "-config", $cnf,
 197                                 "-section", "userreq",
 198                                 "-out", $Dreq, "-key", $Dkey],
 199                                stdout => "err.ss")),
 200                        "make a DSA user cert request");
 201                 skip 'failure', 2 unless
 202                     ok(run(app([@x509cmd, "-CAcreateserial",
 203                                 "-in", $Dreq,
 204                                 "-days", "30",
 205                                 "-req",
 206                                 "-out", $Dcert,
 207                                 "-CA", $CAcert, "-CAkey", $CAkey,
 208                                 "-CAserial", $CAserial,
 209                                 "-extfile", $cnf,
 210                                 "-extensions", "v3_ee_dsa"],
 211                                stdout => "err.ss")),
 212                        "sign DSA user cert request");
 213                 skip 'failure', 1 unless
 214                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
 215                        "verify DSA user cert");
 216                 skip 'failure', 0 unless
 217                     ok(run(app([@x509cmd,
 218                                 "-subject", "-issuer",
 219                                 "-startdate", "-enddate", "-noout",
 220                                 "-in", $Dcert])),
 221                        "DSA Certificate details");
 222               }
 223       };
 224
 225       skip 'failure', 6 unless
 226           subtest 'ECDSA/ECDH certificate creation' => sub {
 227               plan skip_all => "skipping ECDSA/ECDH certificate creation"
 228                   if $no_ec;
 229
 230               plan tests => 5;
 231
 232             SKIP: {
 233                 $ENV{CN2} = "ECDSA Certificate";
 234                 skip 'failure', 4 unless
 235                     ok(run(app(["openssl", "genpkey", "-genparam",
 236                                 "-algorithm", "EC",
 237                                 "-pkeyopt", "ec_paramgen_curve:P-256",
 238                                 "-pkeyopt", "ec_param_enc:named_curve",
 239                                 "-out", "ecp.ss"])),
 240                        "make EC parameters");
 241                 skip 'failure', 3 unless
 242                     ok(run(app([@reqcmd, "-config", $cnf,
 243                                 "-section", "userreq",
 244                                 "-out", $Ereq, "-keyout", $Ekey,
 245                                 "-newkey", "ec:ecp.ss"],
 246                                stdout => "err.ss")),
 247                        "make a ECDSA/ECDH user cert request");
 248                 skip 'failure', 2 unless
 249                     ok(run(app([@x509cmd, "-CAcreateserial",
 250                                 "-in", $Ereq,
 251                                 "-days", "30",
 252                                 "-req",
 253                                 "-out", $Ecert,
 254                                 "-CA", $CAcert, "-CAkey", $CAkey,
 255                                 "-CAserial", $CAserial,
 256                                 "-extfile", $cnf,
 257                                 "-extensions", "v3_ee_ec"],
 258                                stdout => "err.ss")),
 259                        "sign ECDSA/ECDH user cert request");
 260                 skip 'failure', 1 unless
 261                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
 262                        "verify ECDSA/ECDH user cert");
 263                 skip 'failure', 0 unless
 264                     ok(run(app([@x509cmd,
 265                                 "-subject", "-issuer",
 266                                 "-startdate", "-enddate", "-noout",
 267                                 "-in", $Ecert])),
 268                        "ECDSA Certificate details");
 269               }
 270       };
 271
 272       skip 'failure', 5 unless
 273           ok(run(app([@reqcmd, "-config", $proxycnf,
 274                       "-out", $P1req, "-keyout", $P1key, @req_new],
 275                      stdout => "err.ss")),
 276              'make a proxy cert request');
 277
 278
 279       skip 'failure', 4 unless
 280           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
 281                       "-req", "-out", $P1cert,
 282                       "-CA", $Ucert, "-CAkey", $Ukey,
 283                       "-extfile", $proxycnf, "-extensions", "proxy"],
 284                      stdout => "err.ss")),
 285              'sign proxy with user cert');
 286
 287       copy($Ucert, $P1intermediate);
 288       run(app([@verifycmd, "-CAfile", $CAcert,
 289                "-untrusted", $P1intermediate, $P1cert]));
 290       ok(run(app([@x509cmd,
 291                   "-subject", "-issuer", "-startdate", "-enddate",
 292                   "-noout", "-in", $P1cert])),
 293          'Certificate details');
 294
 295       skip 'failure', 2 unless
 296           ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
 297                       "-out", $P2req, "-keyout", $P2key,
 298                       @req_new],
 299                      stdout => "err.ss")),
 300              'make another proxy cert request');
 301
 302
 303       skip 'failure', 1 unless
 304           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
 305                       "-req", "-out", $P2cert,
 306                       "-CA", $P1cert, "-CAkey", $P1key,
 307                       "-extfile", $proxycnf, "-extensions", "proxy_2"],
 308                      stdout => "err.ss")),
 309              'sign second proxy cert request with the first proxy cert');
 310
 311
 312       open OUT, ">", $P2intermediate;
 313       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
 314       close OUT;
 315       run(app([@verifycmd, "-CAfile", $CAcert,
 316                "-untrusted", $P2intermediate, $P2cert]));
 317       ok(run(app([@x509cmd,
 318                   "-subject", "-issuer", "-startdate", "-enddate",
 319                   "-noout", "-in", $P2cert])),
 320          'Certificate details');
 321     }
 322 }
 323
 324 sub testssl {
 325     my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
 326     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
 327     my @providerflags = ("-provider", $provider);
 328
 329     if ($provider eq "default" && !disabled("legacy")) {
 330         push @providerflags, "-provider", "legacy";
 331     }
 332
 333     my @ssltest = ("ssl_old_test",
 334                    "-s_key", $key, "-s_cert", $cert,
 335                    "-c_key", $key, "-c_cert", $cert,
 336                    "-config", $configfile,
 337                    @providerflags);
 338
 339
 340     my $serverinfo = srctop_file("test","serverinfo.pem");
 341
 342     my $dsa_cert = 0;
 343     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
 344                                         "-text", "-noout"]), capture => 1)) {
 345         $dsa_cert = 1;
 346     }
 347
 348
 349     # plan tests => 11;
 350
 351     subtest 'standard SSL tests' => sub {
 352         ######################################################################
 353       plan tests => 13;
 354
 355       SKIP: {
 356           skip "SSLv3 is not supported by this OpenSSL build", 4
 357               if disabled("ssl3");
 358
 359           skip "SSLv3 is not supported by the FIPS provider", 4
 360               if $provider eq "fips";
 361
 362           ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
 363              'test sslv3 via BIO pair');
 364           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
 365              'test sslv3 with server authentication via BIO pair');
 366           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
 367              'test sslv3 with client authentication via BIO pair');
 368           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
 369              'test sslv3 with both server and client authentication via BIO pair');
 370         }
 371
 372       SKIP: {
 373           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
 374               if $no_anytls;
 375
 376           ok(run(test([@ssltest, "-bio_pair"])),
 377              'test sslv2/sslv3 via BIO pair');
 378         }
 379
 380       SKIP: {
 381           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
 382               if $no_anytls;
 383
 384         SKIP: {
 385             skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
 386
 387             ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
 388                'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
 389           }
 390
 391         SKIP: {
 392             skip "skipping dhe1024dsa test", 1
 393                 if ($no_dh);
 394
 395             ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
 396                'test sslv2/sslv3 with 1024bit DHE via BIO pair');
 397           }
 398
 399           ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
 400              'test sslv2/sslv3 with server authentication');
 401           ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
 402              'test sslv2/sslv3 with client authentication via BIO pair');
 403           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
 404              'test sslv2/sslv3 with both client and server authentication via BIO pair');
 405           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
 406              'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
 407
 408         SKIP: {
 409             skip "No IPv4 available on this machine", 1
 410                 unless !disabled("sock") && have_IPv4();
 411             ok(run(test([@ssltest, "-ipv4"])),
 412                'test TLS via IPv4');
 413           }
 414
 415         SKIP: {
 416             skip "No IPv6 available on this machine", 1
 417                 unless !disabled("sock") && have_IPv6();
 418             ok(run(test([@ssltest, "-ipv6"])),
 419                'test TLS via IPv6');
 420           }
 421         }
 422     };
 423
 424     subtest "Testing ciphersuites" => sub {
 425
 426         my @exkeys = ();
 427         my $ciphers = '-PSK:-SRP:@SECLEVEL=0';
 428
 429         if (!$no_dsa) {
 430             push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
 431         }
 432
 433         if (!$no_ec) {
 434             push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
 435         }
 436
 437         my @protocols = ();
 438         # We only use the flags that ssl_old_test understands
 439         push @protocols, "-tls1_3" unless $no_tls1_3;
 440         push @protocols, "-tls1_2" unless $no_tls1_2;
 441         push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
 442         push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
 443         my $protocolciphersuitecount = 0;
 444         my %ciphersuites = ();
 445         my %ciphersstatus = ();
 446         #There's no "-config" option to the ciphers command so we set the
 447         #environment variable instead
 448         my $opensslconf = $ENV{OPENSSL_CONF};
 449         $ENV{OPENSSL_CONF} = $configfile;
 450         foreach my $protocol (@protocols) {
 451             my $ciphersstatus = undef;
 452             my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
 453                                    @providerflags,
 454                                    "ALL:$ciphers"]),
 455                                    capture => 1, statusvar => \$ciphersstatus);
 456             $ciphersstatus{$protocol} = $ciphersstatus;
 457             if ($ciphersstatus) {
 458                 $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
 459                                     @ciphers ];
 460                 $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
 461             }
 462         }
 463         $ENV{OPENSSL_CONF} = $opensslconf;
 464
 465         plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
 466             if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
 467
 468         # The count of protocols is because in addition to the ciphersuites
 469         # we got above, we're running a weak DH test for each protocol (except
 470         # TLSv1.3)
 471         my $testcount = scalar(@protocols) + $protocolciphersuitecount
 472                         + scalar(keys %ciphersuites);
 473         $testcount-- unless $no_tls1_3;
 474         plan tests => $testcount;
 475
 476         foreach my $protocol (@protocols) {
 477             ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
 478         }
 479
 480         foreach my $protocol (sort keys %ciphersuites) {
 481             note "Testing ciphersuites for $protocol";
 482             # ssl_old_test doesn't know -tls1_3, but that's fine, since that's
 483             # the default choice if TLSv1.3 enabled
 484             my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
 485             my $ciphersuites = "";
 486             foreach my $cipher (@{$ciphersuites{$protocol}}) {
 487                 if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
 488                     note "*****SKIPPING $protocol $cipher";
 489                     ok(1);
 490                 } else {
 491                     if ($protocol eq "-tls1_3") {
 492                         $ciphersuites = $cipher;
 493                         $cipher = "";
 494                     } else {
 495                         $cipher = $cipher.':@SECLEVEL=0';
 496                     }
 497                     ok(run(test([@ssltest, @exkeys, "-cipher",
 498                                  $cipher,
 499                                  "-ciphersuites", $ciphersuites,
 500                                  $flag || ()])),
 501                        "Testing $cipher");
 502                 }
 503             }
 504             next if $protocol eq "-tls1_3";
 505
 506           SKIP: {
 507               skip "skipping dhe512 test", 1
 508                   if ($no_dh);
 509
 510               is(run(test([@ssltest,
 511                            "-s_cipher", "EDH",
 512                            "-c_cipher", 'EDH:@SECLEVEL=1',
 513                            "-dhe512",
 514                            $protocol])), 0,
 515                  "testing connection with weak DH, expecting failure");
 516             }
 517         }
 518     };
 519
 520     subtest 'RSA/(EC)DHE/PSK tests' => sub {
 521         ######################################################################
 522
 523         plan tests => 5;
 524
 525       SKIP: {
 526           skip "TLSv1.0 is not supported by this OpenSSL build", 5
 527               if $no_tls1 || $provider eq "fips";
 528
 529         SKIP: {
 530             skip "skipping anonymous DH tests", 1
 531               if ($no_dh);
 532
 533             ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 534                'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
 535           }
 536
 537         SKIP: {
 538             skip "skipping RSA tests", 2
 539                 if $no_rsa;
 540
 541             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
 542                'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
 543
 544             skip "skipping RSA+DHE tests", 1
 545                 if $no_dh;
 546
 547             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 548                'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
 549           }
 550
 551         SKIP: {
 552             skip "skipping PSK tests", 2
 553                 if ($no_psk);
 554
 555             ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 556                'test tls1 with PSK');
 557
 558             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 559                'test tls1 with PSK via BIO pair');
 560           }
 561         }
 562
 563     };
 564
 565     subtest 'Custom Extension tests' => sub {
 566         ######################################################################
 567
 568         plan tests => 1;
 569
 570       SKIP: {
 571           skip "TLSv1.0 is not supported by this OpenSSL build", 1
 572               if $no_tls1 || $provider eq "fips";
 573
 574           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
 575              'test tls1 with custom extensions');
 576         }
 577     };
 578
 579     subtest 'Serverinfo tests' => sub {
 580         ######################################################################
 581
 582         plan tests => 5;
 583
 584       SKIP: {
 585           skip "TLSv1.0 is not supported by this OpenSSL build", 5
 586               if $no_tls1 || $provider eq "fips";
 587
 588           note('echo test tls1 with serverinfo');
 589           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
 590           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
 591           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
 592           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 593           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 594         }
 595     };
 596 }