test/recipes/80-test_ssl_old.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2020 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use POSIX;
  14 use File::Basename;
  15 use File::Copy;
  16 use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr data_file/;
  17 use OpenSSL::Test::Utils;
  18
  19 BEGIN {
  20 setup("test_ssl_old");
  21 }
  22
  23 use lib srctop_dir('Configurations');
  24 use lib bldtop_dir('.');
  25 use platform;
  26
  27 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
  28 my $infile = bldtop_file('providers', platform->dso('fips'));
  29
  30 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
  31     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
  32     $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
  33     anydisabled qw/rsa dsa dh ec psk
  34                    ssl3 tls1 tls1_1 tls1_2 tls1_3
  35                    dtls dtls1 dtls1_2 ct/;
  36 my $no_anytls = alldisabled(available_protocols("tls"));
  37 my $no_anydtls = alldisabled(available_protocols("dtls"));
  38
  39 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
  40     if $no_anytls && $no_anydtls;
  41
  42 my $digest = "-sha1";
  43 my @reqcmd = ("openssl", "req");
  44 my @x509cmd = ("openssl", "x509", $digest);
  45 my @verifycmd = ("openssl", "verify");
  46 my @genpkeycmd = ("openssl", "genpkey");
  47 my $dummycnf = srctop_file("apps", "openssl.cnf");
  48
  49 my $cnf = srctop_file("test", "ca-and-certs.cnf");
  50 my $CAkey = "keyCA.ss";
  51 my $CAcert="certCA.ss";
  52 my $CAserial="certCA.srl";
  53 my $CAreq="reqCA.ss";
  54 my $CAreq2="req2CA.ss"; # temp
  55 my $Ukey="keyU.ss";
  56 my $Ureq="reqU.ss";
  57 my $Ucert="certU.ss";
  58 my $Dkey="keyD.ss";
  59 my $Dreq="reqD.ss";
  60 my $Dcert="certD.ss";
  61 my $Ekey="keyE.ss";
  62 my $Ereq="reqE.ss";
  63 my $Ecert="certE.ss";
  64
  65 my $proxycnf=srctop_file("test", "proxy.cnf");
  66 my $P1key="keyP1.ss";
  67 my $P1req="reqP1.ss";
  68 my $P1cert="certP1.ss";
  69 my $P1intermediate="tmp_intP1.ss";
  70 my $P2key="keyP2.ss";
  71 my $P2req="reqP2.ss";
  72 my $P2cert="certP2.ss";
  73 my $P2intermediate="tmp_intP2.ss";
  74
  75 my $server_sess="server.ss";
  76 my $client_sess="client.ss";
  77
  78 # ssl_old_test.c is deprecated in favour of the new framework in ssl_test.c
  79 # If you're adding tests here, you probably want to convert them to the
  80 # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
  81 plan tests =>
  82    ($no_fips ? 0 : 1 + 5) # For fipsinstall + testssl with fips provider
  83     + 1                   # For testss
  84     + 5                   # For the testssl with default provider
  85     ;
  86
  87 unless ($no_fips) {
  88     ok(run(app(['openssl', 'fipsinstall',
  89                 '-out', bldtop_file('providers', 'fipsmodule.cnf'),
  90                 '-module', $infile])),
  91        "fipsinstall");
  92 }
  93
  94 subtest 'test_ss' => sub {
  95     if (testss()) {
  96         open OUT, ">", "intP1.ss";
  97         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
  98         close OUT;
  99
 100         open OUT, ">", "intP2.ss";
 101         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
 102         close OUT;
 103     }
 104 };
 105
 106 note('test_ssl_old -- key U');
 107 my $configfile = srctop_file("test","default-and-legacy.cnf");
 108 if (disabled("legacy")) {
 109     $configfile = srctop_file("test","default.cnf");
 110 }
 111
 112 testssl($Ukey, $Ucert, $CAcert, "default", $configfile);
 113 unless ($no_fips) {
 114     testssl($Ukey, $Ucert, $CAcert, "fips",
 115             srctop_file("test","fips-and-base.cnf"));
 116 }
 117
 118 # -----------
 119 # subtest functions
 120 sub testss {
 121     my @req_dsa = ("-newkey",
 122                    "dsa:".data_file("dsa2048.pem"));
 123     my $dsaparams = data_file("dsa2048.pem");
 124     my @req_new;
 125     if ($no_rsa) {
 126         @req_new = @req_dsa;
 127     } else {
 128         @req_new = ("-new");
 129     }
 130
 131     plan tests => 17;
 132
 133   SKIP: {
 134       skip 'failure', 16 unless
 135           ok(run(app([@reqcmd, "-config", $cnf,
 136                       "-out", $CAreq, "-keyout", $CAkey,
 137                       @req_new])),
 138              'make cert request');
 139
 140       skip 'failure', 15 unless
 141           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
 142                       "-req", "-out", $CAcert, "-signkey", $CAkey,
 143                       "-extfile", $cnf, "-extensions", "v3_ca"],
 144                      stdout => "err.ss")),
 145              'convert request into self-signed cert');
 146
 147       skip 'failure', 14 unless
 148           ok(run(app([@x509cmd, "-in", $CAcert,
 149                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
 150                      stdout => "err.ss")),
 151              'convert cert into a cert request');
 152
 153       skip 'failure', 13 unless
 154           ok(run(app([@reqcmd, "-config", $dummycnf,
 155                       "-verify", "-in", $CAreq, "-noout"])),
 156              'verify request 1');
 157
 158
 159       skip 'failure', 12 unless
 160           ok(run(app([@reqcmd, "-config", $dummycnf,
 161                       "-verify", "-in", $CAreq2, "-noout"])),
 162              'verify request 2');
 163
 164       skip 'failure', 11 unless
 165           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
 166              'verify signature');
 167
 168       skip 'failure', 10 unless
 169           ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
 170                       "-out", $Ureq, "-keyout", $Ukey, @req_new],
 171                      stdout => "err.ss")),
 172              'make a user cert request');
 173
 174       skip 'failure', 9 unless
 175           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
 176                       "-req", "-out", $Ucert,
 177                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
 178                       "-extfile", $cnf, "-extensions", "v3_ee"],
 179                      stdout => "err.ss"))
 180              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
 181              'sign user cert request');
 182
 183       skip 'failure', 8 unless
 184           ok(run(app([@x509cmd,
 185                       "-subject", "-issuer", "-startdate", "-enddate",
 186                       "-noout", "-in", $Ucert])),
 187              'Certificate details');
 188
 189       skip 'failure', 7 unless
 190           subtest 'DSA certificate creation' => sub {
 191               plan skip_all => "skipping DSA certificate creation"
 192                   if $no_dsa;
 193
 194               plan tests => 5;
 195
 196             SKIP: {
 197                 $ENV{CN2} = "DSA Certificate";
 198                 skip 'failure', 4 unless
 199                     ok(run(app([@genpkeycmd, "-out", $Dkey,
 200                                 "-paramfile", $dsaparams],
 201                                stdout => "err.ss")),
 202                        "make a DSA key");
 203                 skip 'failure', 3 unless
 204                     ok(run(app([@reqcmd, "-new", "-config", $cnf,
 205                                 "-section", "userreq",
 206                                 "-out", $Dreq, "-key", $Dkey],
 207                                stdout => "err.ss")),
 208                        "make a DSA user cert request");
 209                 skip 'failure', 2 unless
 210                     ok(run(app([@x509cmd, "-CAcreateserial",
 211                                 "-in", $Dreq,
 212                                 "-days", "30",
 213                                 "-req",
 214                                 "-out", $Dcert,
 215                                 "-CA", $CAcert, "-CAkey", $CAkey,
 216                                 "-CAserial", $CAserial,
 217                                 "-extfile", $cnf,
 218                                 "-extensions", "v3_ee_dsa"],
 219                                stdout => "err.ss")),
 220                        "sign DSA user cert request");
 221                 skip 'failure', 1 unless
 222                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
 223                        "verify DSA user cert");
 224                 skip 'failure', 0 unless
 225                     ok(run(app([@x509cmd,
 226                                 "-subject", "-issuer",
 227                                 "-startdate", "-enddate", "-noout",
 228                                 "-in", $Dcert])),
 229                        "DSA Certificate details");
 230               }
 231       };
 232
 233       skip 'failure', 6 unless
 234           subtest 'ECDSA/ECDH certificate creation' => sub {
 235               plan skip_all => "skipping ECDSA/ECDH certificate creation"
 236                   if $no_ec;
 237
 238               plan tests => 5;
 239
 240             SKIP: {
 241                 $ENV{CN2} = "ECDSA Certificate";
 242                 skip 'failure', 4 unless
 243                     ok(run(app(["openssl", "genpkey", "-genparam",
 244                                 "-algorithm", "EC",
 245                                 "-pkeyopt", "ec_paramgen_curve:P-256",
 246                                 "-pkeyopt", "ec_param_enc:named_curve",
 247                                 "-out", "ecp.ss"])),
 248                        "make EC parameters");
 249                 skip 'failure', 3 unless
 250                     ok(run(app([@reqcmd, "-config", $cnf,
 251                                 "-section", "userreq",
 252                                 "-out", $Ereq, "-keyout", $Ekey,
 253                                 "-newkey", "ec:ecp.ss"],
 254                                stdout => "err.ss")),
 255                        "make a ECDSA/ECDH user cert request");
 256                 skip 'failure', 2 unless
 257                     ok(run(app([@x509cmd, "-CAcreateserial",
 258                                 "-in", $Ereq,
 259                                 "-days", "30",
 260                                 "-req",
 261                                 "-out", $Ecert,
 262                                 "-CA", $CAcert, "-CAkey", $CAkey,
 263                                 "-CAserial", $CAserial,
 264                                 "-extfile", $cnf,
 265                                 "-extensions", "v3_ee_ec"],
 266                                stdout => "err.ss")),
 267                        "sign ECDSA/ECDH user cert request");
 268                 skip 'failure', 1 unless
 269                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
 270                        "verify ECDSA/ECDH user cert");
 271                 skip 'failure', 0 unless
 272                     ok(run(app([@x509cmd,
 273                                 "-subject", "-issuer",
 274                                 "-startdate", "-enddate", "-noout",
 275                                 "-in", $Ecert])),
 276                        "ECDSA Certificate details");
 277               }
 278       };
 279
 280       skip 'failure', 5 unless
 281           ok(run(app([@reqcmd, "-config", $proxycnf,
 282                       "-out", $P1req, "-keyout", $P1key, @req_new],
 283                      stdout => "err.ss")),
 284              'make a proxy cert request');
 285
 286
 287       skip 'failure', 4 unless
 288           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
 289                       "-req", "-out", $P1cert,
 290                       "-CA", $Ucert, "-CAkey", $Ukey,
 291                       "-extfile", $proxycnf, "-extensions", "proxy"],
 292                      stdout => "err.ss")),
 293              'sign proxy with user cert');
 294
 295       copy($Ucert, $P1intermediate);
 296       run(app([@verifycmd, "-CAfile", $CAcert,
 297                "-untrusted", $P1intermediate, $P1cert]));
 298       ok(run(app([@x509cmd,
 299                   "-subject", "-issuer", "-startdate", "-enddate",
 300                   "-noout", "-in", $P1cert])),
 301          'Certificate details');
 302
 303       skip 'failure', 2 unless
 304           ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
 305                       "-out", $P2req, "-keyout", $P2key,
 306                       @req_new],
 307                      stdout => "err.ss")),
 308              'make another proxy cert request');
 309
 310
 311       skip 'failure', 1 unless
 312           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
 313                       "-req", "-out", $P2cert,
 314                       "-CA", $P1cert, "-CAkey", $P1key,
 315                       "-extfile", $proxycnf, "-extensions", "proxy_2"],
 316                      stdout => "err.ss")),
 317              'sign second proxy cert request with the first proxy cert');
 318
 319
 320       open OUT, ">", $P2intermediate;
 321       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
 322       close OUT;
 323       run(app([@verifycmd, "-CAfile", $CAcert,
 324                "-untrusted", $P2intermediate, $P2cert]));
 325       ok(run(app([@x509cmd,
 326                   "-subject", "-issuer", "-startdate", "-enddate",
 327                   "-noout", "-in", $P2cert])),
 328          'Certificate details');
 329     }
 330 }
 331
 332 sub testssl {
 333     my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
 334     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
 335     my @providerflags = ("-provider", $provider);
 336
 337     if ($provider eq "default" && !disabled("legacy")) {
 338         push @providerflags, "-provider", "legacy";
 339     }
 340
 341     my @ssltest = ("ssl_old_test",
 342                    "-s_key", $key, "-s_cert", $cert,
 343                    "-c_key", $key, "-c_cert", $cert,
 344                    "-config", $configfile,
 345                    @providerflags);
 346
 347
 348     my $serverinfo = srctop_file("test","serverinfo.pem");
 349
 350     my $dsa_cert = 0;
 351     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
 352                                         "-text", "-noout"]), capture => 1)) {
 353         $dsa_cert = 1;
 354     }
 355
 356
 357     # plan tests => 11;
 358
 359     subtest 'standard SSL tests' => sub {
 360         ######################################################################
 361       plan tests => 13;
 362
 363       SKIP: {
 364           skip "SSLv3 is not supported by this OpenSSL build", 4
 365               if disabled("ssl3");
 366
 367           skip "SSLv3 is not supported by the FIPS provider", 4
 368               if $provider eq "fips";
 369
 370           ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
 371              'test sslv3 via BIO pair');
 372           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
 373              'test sslv3 with server authentication via BIO pair');
 374           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
 375              'test sslv3 with client authentication via BIO pair');
 376           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
 377              'test sslv3 with both server and client authentication via BIO pair');
 378         }
 379
 380       SKIP: {
 381           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
 382               if $no_anytls;
 383
 384           ok(run(test([@ssltest, "-bio_pair"])),
 385              'test sslv2/sslv3 via BIO pair');
 386         }
 387
 388       SKIP: {
 389           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
 390               if $no_anytls;
 391
 392         SKIP: {
 393             skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
 394
 395             ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
 396                'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
 397           }
 398
 399         SKIP: {
 400             skip "skipping dhe1024dsa test", 1
 401                 if ($no_dh);
 402
 403             ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
 404                'test sslv2/sslv3 with 1024bit DHE via BIO pair');
 405           }
 406
 407           ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
 408              'test sslv2/sslv3 with server authentication');
 409           ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
 410              'test sslv2/sslv3 with client authentication via BIO pair');
 411           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
 412              'test sslv2/sslv3 with both client and server authentication via BIO pair');
 413           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
 414              'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
 415
 416         SKIP: {
 417             skip "No IPv4 available on this machine", 1
 418                 unless !disabled("sock") && have_IPv4();
 419             ok(run(test([@ssltest, "-ipv4"])),
 420                'test TLS via IPv4');
 421           }
 422
 423         SKIP: {
 424             skip "No IPv6 available on this machine", 1
 425                 unless !disabled("sock") && have_IPv6();
 426             ok(run(test([@ssltest, "-ipv6"])),
 427                'test TLS via IPv6');
 428           }
 429         }
 430     };
 431
 432     subtest "Testing ciphersuites" => sub {
 433
 434         my @exkeys = ();
 435         my $ciphers = '-PSK:-SRP:@SECLEVEL=0';
 436
 437         if (!$no_dsa) {
 438             push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
 439         }
 440
 441         if (!$no_ec) {
 442             push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
 443         }
 444
 445         my @protocols = ();
 446         # We only use the flags that ssl_old_test understands
 447         push @protocols, "-tls1_3" unless $no_tls1_3;
 448         push @protocols, "-tls1_2" unless $no_tls1_2;
 449         push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
 450         push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
 451         my $protocolciphersuitecount = 0;
 452         my %ciphersuites = ();
 453         my %ciphersstatus = ();
 454         #There's no "-config" option to the ciphers command so we set the
 455         #environment variable instead
 456         my $opensslconf = $ENV{OPENSSL_CONF};
 457         $ENV{OPENSSL_CONF} = $configfile;
 458         foreach my $protocol (@protocols) {
 459             my $ciphersstatus = undef;
 460             my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
 461                                    @providerflags,
 462                                    "ALL:$ciphers"]),
 463                                    capture => 1, statusvar => \$ciphersstatus);
 464             $ciphersstatus{$protocol} = $ciphersstatus;
 465             if ($ciphersstatus) {
 466                 $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
 467                                     @ciphers ];
 468                 $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
 469             }
 470         }
 471         $ENV{OPENSSL_CONF} = $opensslconf;
 472
 473         plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
 474             if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
 475
 476         # The count of protocols is because in addition to the ciphersuites
 477         # we got above, we're running a weak DH test for each protocol (except
 478         # TLSv1.3)
 479         my $testcount = scalar(@protocols) + $protocolciphersuitecount
 480                         + scalar(keys %ciphersuites);
 481         $testcount-- unless $no_tls1_3;
 482         plan tests => $testcount;
 483
 484         foreach my $protocol (@protocols) {
 485             ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
 486         }
 487
 488         foreach my $protocol (sort keys %ciphersuites) {
 489             note "Testing ciphersuites for $protocol";
 490             # ssl_old_test doesn't know -tls1_3, but that's fine, since that's
 491             # the default choice if TLSv1.3 enabled
 492             my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
 493             my $ciphersuites = "";
 494             foreach my $cipher (@{$ciphersuites{$protocol}}) {
 495                 if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
 496                     note "*****SKIPPING $protocol $cipher";
 497                     ok(1);
 498                 } else {
 499                     if ($protocol eq "-tls1_3") {
 500                         $ciphersuites = $cipher;
 501                         $cipher = "";
 502                     } else {
 503                         $cipher = $cipher.':@SECLEVEL=0';
 504                     }
 505                     ok(run(test([@ssltest, @exkeys, "-cipher",
 506                                  $cipher,
 507                                  "-ciphersuites", $ciphersuites,
 508                                  $flag || ()])),
 509                        "Testing $cipher");
 510                 }
 511             }
 512             next if $protocol eq "-tls1_3";
 513
 514           SKIP: {
 515               skip "skipping dhe512 test", 1
 516                   if ($no_dh);
 517
 518               is(run(test([@ssltest,
 519                            "-s_cipher", "EDH",
 520                            "-c_cipher", 'EDH:@SECLEVEL=1',
 521                            "-dhe512",
 522                            $protocol])), 0,
 523                  "testing connection with weak DH, expecting failure");
 524             }
 525         }
 526     };
 527
 528     subtest 'RSA/(EC)DHE/PSK tests' => sub {
 529         ######################################################################
 530
 531         plan tests => 5;
 532
 533       SKIP: {
 534           skip "TLSv1.0 is not supported by this OpenSSL build", 5
 535               if $no_tls1 || $provider eq "fips";
 536
 537         SKIP: {
 538             skip "skipping anonymous DH tests", 1
 539               if ($no_dh);
 540
 541             ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 542                'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
 543           }
 544
 545         SKIP: {
 546             skip "skipping RSA tests", 2
 547                 if $no_rsa;
 548
 549             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
 550                'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
 551
 552             skip "skipping RSA+DHE tests", 1
 553                 if $no_dh;
 554
 555             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 556                'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
 557           }
 558
 559         SKIP: {
 560             skip "skipping PSK tests", 2
 561                 if ($no_psk);
 562
 563             ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 564                'test tls1 with PSK');
 565
 566             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 567                'test tls1 with PSK via BIO pair');
 568           }
 569         }
 570
 571     };
 572
 573     subtest 'Custom Extension tests' => sub {
 574         ######################################################################
 575
 576         plan tests => 1;
 577
 578       SKIP: {
 579           skip "TLSv1.0 is not supported by this OpenSSL build", 1
 580               if $no_tls1 || $provider eq "fips";
 581
 582           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
 583              'test tls1 with custom extensions');
 584         }
 585     };
 586
 587     subtest 'Serverinfo tests' => sub {
 588         ######################################################################
 589
 590         plan tests => 5;
 591
 592       SKIP: {
 593           skip "TLSv1.0 is not supported by this OpenSSL build", 5
 594               if $no_tls1 || $provider eq "fips";
 595
 596           note('echo test tls1 with serverinfo');
 597           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
 598           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
 599           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
 600           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 601           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 602         }
 603     };
 604 }