test/tests.com

   1 $! TESTS.COM  --  Performs the necessary tests
   2 $!
   3 $! P1   tests to be performed.  Empty means all.
   4 $! P2   Pointer size: "", "32", or "64".
   5 $!
   6 $! Announce/identify.
   7 $!
   8 $       proc = f$environment( "procedure")
   9 $       write sys$output "@@@ "+ -
  10          f$parse( proc, , , "name")+ f$parse( proc, , , "type")
  11 $!
  12 $       __proc = f$element(0,";",f$environment("procedure"))
  13 $       __here = f$parse(f$parse("A.;",__proc) - "A.;","[]A.;") - "A.;"
  14 $       __save_default = f$environment("default")
  15 $       __arch = "VAX"
  16 $       if f$getsyi("cpu") .ge. 128 then -
  17            __arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
  18 $       if __arch .eqs. "" then __arch = "UNK"
  19 $!
  20 $       __archd = __arch
  21 $       pointer_size = ""
  22 $       if (p2 .eq. "64")
  23 $       then
  24 $         pointer_size = "64"
  25 $         __archd = __arch+ "_64"
  26 $       endif
  27 $!
  28 $       texe_dir := sys$disk:[-.'__archd'.exe.test]
  29 $       exe_dir := sys$disk:[-.'__archd'.exe.apps]
  30 $
  31 $       set default '__here'
  32 $
  33 $       ROOT = F$PARSE("sys$disk:[-]A.;0",,,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
  34 $       ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
  35 $       ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
  36                    - ".][000000" - "[000000." - "][" - "[" - "]"
  37 $       ROOT = ROOT_DEV + "[" + ROOT_DIR
  38 $       DEFINE/NOLOG SSLROOT 'ROOT'.APPS.] /TRANS=CONC
  39 $       openssl_conf := sslroot:[000000]openssl-vms.cnf
  40 $
  41 $       on control_y then goto exit
  42 $       on error then goto exit
  43 $
  44 $       if p1 .nes. ""
  45 $       then
  46 $           tests = p1
  47 $       else
  48 $! NOTE: This list reflects the list of dependencies following the
  49 $! "alltests" target in Makefile.  This should make it easy to see
  50 $! if there's a difference that needs to be taken care of.
  51 $           tests := -
  52         test_des,test_idea,test_sha,test_md4,test_md5,test_hmac,-
  53         test_md2,test_mdc2,test_wp,-
  54         test_rmd,test_rc2,test_rc4,test_rc5,test_bf,test_cast,test_aes,-
  55         test_rand,test_bn,test_ec,test_ecdsa,test_ecdh,-
  56         test_enc,test_x509,test_rsa,test_crl,test_sid,-
  57         test_gen,test_req,test_pkcs7,test_verify,test_dh,test_dsa,-
  58         test_ss,test_ca,test_engine,test_evp,test_ssl,test_tsa,test_ige,-
  59         test_jpake,test_srp,test_cms,test_heartbeat,test_constant_time
  60 $       endif
  61 $       tests = f$edit(tests,"COLLAPSE")
  62 $
  63 $       BNTEST :=       bntest
  64 $       ECTEST :=       ectest
  65 $       ECDSATEST :=    ecdsatest
  66 $       ECDHTEST :=     ecdhtest
  67 $       EXPTEST :=      exptest
  68 $       IDEATEST :=     ideatest
  69 $       SHATEST :=      shatest
  70 $       SHA1TEST :=     sha1test
  71 $       SHA256TEST :=   sha256t
  72 $       SHA512TEST :=   sha512t
  73 $       MDC2TEST :=     mdc2test
  74 $       RMDTEST :=      rmdtest
  75 $       MD2TEST :=      md2test
  76 $       MD4TEST :=      md4test
  77 $       MD5TEST :=      md5test
  78 $       HMACTEST :=     hmactest
  79 $       WPTEST :=       wp_test
  80 $       RC2TEST :=      rc2test
  81 $       RC4TEST :=      rc4test
  82 $       RC5TEST :=      rc5test
  83 $       BFTEST :=       bftest
  84 $       CASTTEST :=     casttest
  85 $       DESTEST :=      destest
  86 $       RANDTEST :=     randtest
  87 $       DHTEST :=       dhtest
  88 $       DSATEST :=      dsatest
  89 $       METHTEST :=     methtest
  90 $       SSLTEST :=      ssltest
  91 $       RSATEST :=      rsa_test
  92 $       ENGINETEST :=   enginetest
  93 $       EVPTEST :=      evp_test
  94 $       IGETEST :=      igetest
  95 $       JPAKETEST :=    jpaketest
  96 $       SRPTEST :=      srptest
  97 $       ASN1TEST :=     asn1test
  98 $       HEARTBEATTEST := heartbeat_test
  99 $       CONSTTIMETEST := constant_time_test
 100 $!
 101 $       tests_i = 0
 102 $ loop_tests:
 103 $       tests_e = f$element(tests_i,",",tests)
 104 $       tests_i = tests_i + 1
 105 $       if tests_e .eqs. "," then goto exit
 106 $       write sys$output "---> ''tests_e'"
 107 $       gosub 'tests_e'
 108 $       goto loop_tests
 109 $
 110 $ test_evp:
 111 $       mcr 'texe_dir''evptest' 'ROOT'.CRYPTO.EVP]evptests.txt
 112 $       return
 113 $ test_des:
 114 $       mcr 'texe_dir''destest'
 115 $       return
 116 $ test_idea:
 117 $       mcr 'texe_dir''ideatest'
 118 $       return
 119 $ test_sha:
 120 $       mcr 'texe_dir''shatest'
 121 $       mcr 'texe_dir''sha1test'
 122 $       mcr 'texe_dir''sha256test'
 123 $       mcr 'texe_dir''sha512test'
 124 $       return
 125 $ test_mdc2:
 126 $       mcr 'texe_dir''mdc2test'
 127 $       return
 128 $ test_md5:
 129 $       mcr 'texe_dir''md5test'
 130 $       return
 131 $ test_md4:
 132 $       mcr 'texe_dir''md4test'
 133 $       return
 134 $ test_hmac:
 135 $       mcr 'texe_dir''hmactest'
 136 $       return
 137 $ test_wp:
 138 $       mcr 'texe_dir''wptest'
 139 $       return
 140 $ test_md2:
 141 $       mcr 'texe_dir''md2test'
 142 $       return
 143 $ test_rmd:
 144 $       mcr 'texe_dir''rmdtest'
 145 $       return
 146 $ test_bf:
 147 $       mcr 'texe_dir''bftest'
 148 $       return
 149 $ test_cast:
 150 $       mcr 'texe_dir''casttest'
 151 $       return
 152 $ test_rc2:
 153 $       mcr 'texe_dir''rc2test'
 154 $       return
 155 $ test_rc4:
 156 $       mcr 'texe_dir''rc4test'
 157 $       return
 158 $ test_rc5:
 159 $       mcr 'texe_dir''rc5test'
 160 $       return
 161 $ test_rand:
 162 $       mcr 'texe_dir''randtest'
 163 $       return
 164 $ test_enc:
 165 $       @testenc.com 'pointer_size'
 166 $       return
 167 $ test_x509:
 168 $       set noon
 169 $       define sys$error test_x509.err
 170 $       write sys$output "test normal x509v1 certificate"
 171 $       @tx509.com "" 'pointer_size'
 172 $       write sys$output "test first x509v3 certificate"
 173 $       @tx509.com v3-cert1.pem 'pointer_size'
 174 $       write sys$output "test second x509v3 certificate"
 175 $       @tx509.com v3-cert2.pem 'pointer_size'
 176 $       deassign sys$error
 177 $       set on
 178 $       return
 179 $ test_rsa:
 180 $       set noon
 181 $       define sys$error test_rsa.err
 182 $       @trsa.com "" 'pointer_size'
 183 $       deassign sys$error
 184 $       mcr 'texe_dir''rsatest'
 185 $       set on
 186 $       return
 187 $ test_crl:
 188 $       set noon
 189 $       define sys$error test_crl.err
 190 $       @tcrl.com "" 'pointer_size'
 191 $       deassign sys$error
 192 $       set on
 193 $       return
 194 $ test_sid:
 195 $       set noon
 196 $       define sys$error test_sid.err
 197 $       @tsid.com "" 'pointer_size'
 198 $       deassign sys$error
 199 $       set on
 200 $       return
 201 $ test_req:
 202 $       set noon
 203 $       define sys$error test_req.err
 204 $       @treq.com "" 'pointer_size'
 205 $       @treq.com testreq2.pem 'pointer_size'
 206 $       deassign sys$error
 207 $       set on
 208 $       return
 209 $ test_pkcs7:
 210 $       set noon
 211 $       define sys$error test_pkcs7.err
 212 $       @tpkcs7.com "" 'pointer_size'
 213 $       @tpkcs7d.com "" 'pointer_size'
 214 $       deassign sys$error
 215 $       set on
 216 $       return
 217 $ test_bn:
 218 $       write sys$output -
 219               "starting big number library test, could take a while..."
 220 $       set noon
 221 $       define sys$error test_bn.err
 222 $       define sys$output test_bn.out
 223 $       @ bctest.com
 224 $       status = $status
 225 $       deassign sys$error
 226 $       deassign sys$output
 227 $       set on
 228 $       if (status)
 229 $       then
 230 $           create /fdl = sys$input bntest-vms.tmp
 231 FILE
 232         ORGANIZATION    sequential
 233 RECORD
 234         FORMAT          stream_lf
 235 $           define /user_mode sys$output bntest-vms.tmp
 236 $           mcr 'texe_dir''bntest'
 237 $           define /user_mode sys$input bntest-vms.tmp
 238 $           define /user_mode sys$output bntest-vms.out
 239 $           bc
 240 $           @ bntest.com bntest-vms.out
 241 $           status = $status
 242 $           if (status)
 243 $           then
 244 $               delete bntest-vms.out;*
 245 $               delete bntest-vms.tmp;*
 246 $           endif
 247 $       else
 248 $           create /fdl = sys$input bntest-vms.sh
 249 FILE
 250         ORGANIZATION    sequential
 251 RECORD
 252         FORMAT          stream_lf
 253 $           open /append bntest_file bntest-vms.sh
 254 $           type /output = bntest_file sys$input:
 255 << __FOO__ sh -c "`sh ./bctest`" | perl -e '$i=0; while (<STDIN>) {if (/^test (.*)/) {print STDERR "\nverify $1";} elsif (!/^0$/) {die "\nFailed! bc: $_";} else {print STDERR "."; $i++;}} print STDERR "\n$i tests passed\n"'
 256 $           define /user_mode sys$output bntest-vms.tmp
 257 $           mcr 'texe_dir''bntest'
 258 $           copy bntest-vms.tmp bntest_file
 259 $           delete bntest-vms.tmp;*
 260 $           type /output = bntest_file sys$input:
 261 __FOO__
 262 $           close bntest_file
 263 $           write sys$output "-- copy the [.test]bntest-vms.sh and [.test]bctest files to a Unix system and"
 264 $           write sys$output "-- run bntest-vms.sh through sh or bash to verify that the bignum operations"
 265 $           write sys$output "-- went well."
 266 $           write sys$output ""
 267 $       endif
 268 $       write sys$output "test a^b%c implementations"
 269 $       mcr 'texe_dir''exptest'
 270 $       return
 271 $ test_ec:
 272 $       write sys$output "test elliptic curves"
 273 $       mcr 'texe_dir''ectest'
 274 $       return
 275 $ test_ecdsa:
 276 $       write sys$output "test ecdsa"
 277 $       mcr 'texe_dir''ecdsatest'
 278 $       return
 279 $ test_ecdh:
 280 $       write sys$output "test ecdh"
 281 $       mcr 'texe_dir''ecdhtest'
 282 $       return
 283 $ test_verify:
 284 $       write sys$output "The following command should have some OK's and some failures"
 285 $       write sys$output "There are definitly a few expired certificates"
 286 $       @tverify.com 'pointer_size'
 287 $       return
 288 $ test_dh:
 289 $       write sys$output "Generate a set of DH parameters"
 290 $       mcr 'texe_dir''dhtest'
 291 $       return
 292 $ test_dsa:
 293 $       write sys$output "Generate a set of DSA parameters"
 294 $       mcr 'texe_dir''dsatest'
 295 $       return
 296 $ test_gen:
 297 $       write sys$output "Generate and verify a certificate request"
 298 $       @testgen.com 'pointer_size'
 299 $       return
 300 $ maybe_test_ss:
 301 $       testss_RDT = f$cvtime(f$file_attributes("testss.com","RDT"))
 302 $       if f$cvtime(f$file_attributes("keyU.ss","RDT")) .les. testss_RDT then -
 303                 goto test_ss
 304 $       if f$cvtime(f$file_attributes("certU.ss","RDT")) .les. testss_RDT then -
 305                 goto test_ss
 306 $       if f$cvtime(f$file_attributes("certCA.ss","RDT")) .les. testss_RDT then -
 307                 goto test_ss
 308 $       return
 309 $ test_ss:
 310 $       write sys$output "Generate and certify a test certificate"
 311 $       @testss.com 'pointer_size'
 312 $       return
 313 $ test_engine:
 314 $       write sys$output "Manipulate the ENGINE structures"
 315 $       mcr 'texe_dir''enginetest'
 316 $       return
 317 $ test_ssl:
 318 $       write sys$output "test SSL protocol"
 319 $       gosub maybe_test_ss
 320 $       @testssl.com keyU.ss certU.ss certCA.ss 'pointer_size'
 321 $       return
 322 $ test_ca:
 323 $       set noon
 324 $       define /user_mode sys$output test_ca.out
 325 $       mcr 'exe_dir'openssl no-rsa
 326 $       save_severity=$SEVERITY
 327 $       set on
 328 $       if save_severity
 329 $       then
 330 $           write sys$output "skipping CA.com test -- requires RSA"
 331 $       else
 332 $           write sys$output "Generate and certify a test certificate via the 'ca' program"
 333 $           @testca.com 'pointer_size'
 334 $       endif
 335 $       return
 336 $ test_aes:
 337 $!      write sys$output "test AES"
 338 $!      !mcr 'texe_dir''aestest'
 339 $       return
 340 $ test_tsa:
 341 $       set noon
 342 $       define /user_mode sys$output nla0:
 343 $       mcr 'exe_dir'openssl no-rsa
 344 $       save_severity=$SEVERITY
 345 $       set on
 346 $       if save_severity
 347 $       then
 348 $           write sys$output "skipping testtsa.com test -- requires RSA"
 349 $       else
 350 $           @testtsa.com "" "" "" 'pointer_size'
 351 $       endif
 352 $       return
 353 $ test_ige:
 354 $       write sys$output "Test IGE mode"
 355 $       mcr 'texe_dir''igetest'
 356 $       return
 357 $ test_jpake:
 358 $       write sys$output "Test JPAKE"
 359 $       mcr 'texe_dir''jpaketest'
 360 $       return
 361 $ test_cms:
 362 $       write sys$output "CMS consistency test"
 363 $       ! Define the logical name used to find openssl.exe in the perl script.
 364 $       define /user_mode osslx 'exe_dir'
 365 $       perl CMS-TEST.PL
 366 $       return
 367 $ test_srp:
 368 $       write sys$output "Test SRP"
 369 $       mcr 'texe_dir''srptest'
 370 $       return
 371 $ test_heartbeat:
 372 $       write sys$output "Test HEARTBEAT"
 373 $       mcr 'texe_dir''heartbeattest'
 374 $       return
 375 $ test_constant_time:
 376 $       write sys$output "Test constant time utilities"
 377 $       mcr 'texe_dir''consttimetest'
 378 $       return
 379 $
 380 $
 381 $ exit:
 382 $       on error then goto exit2 ! In case openssl.exe didn't build.
 383 $       mcr 'exe_dir'openssl version -a
 384 $ exit2:
 385 $       set default '__save_default'
 386 $       deassign sslroot
 387 $       exit