+/**
+ * enum nl80211_bss_color_attributes - BSS Color attributes
+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
+ *
+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
+ */
+enum nl80211_bss_color_attributes {
+ __NL80211_HE_BSS_COLOR_ATTR_INVALID,
+
+ NL80211_HE_BSS_COLOR_ATTR_COLOR,
+ NL80211_HE_BSS_COLOR_ATTR_DISABLED,
+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
+
+ /* keep last */
+ __NL80211_HE_BSS_COLOR_ATTR_LAST,
+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes
+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
+ *
+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
+ * attribute for each interface type that supports AKM suites specified in
+ * %NL80211_IFTYPE_AKM_ATTR_SUITES
+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
+ * AKM suites for the specified interface types.
+ *
+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
+ */
+enum nl80211_iftype_akm_attributes {
+ __NL80211_IFTYPE_AKM_ATTR_INVALID,
+
+ NL80211_IFTYPE_AKM_ATTR_IFTYPES,
+ NL80211_IFTYPE_AKM_ATTR_SUITES,
+
+ /* keep last */
+ __NL80211_IFTYPE_AKM_ATTR_LAST,
+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_fils_discovery_attributes - FILS discovery configuration
+ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
+ *
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.
+ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
+ * frame including the headers.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
+ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
+ */
+enum nl80211_fils_discovery_attributes {
+ __NL80211_FILS_DISCOVERY_ATTR_INVALID,
+
+ NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+ NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+ NL80211_FILS_DISCOVERY_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_FILS_DISCOVERY_ATTR_LAST,
+ NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
+};
+
+/*
+ * FILS discovery template minimum length with action frame headers and
+ * mandatory fields.
+ */
+#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
+
+/**
+ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
+ * response configuration. Applicable only in 6GHz.
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
+ *
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
+ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
+ * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is
+ * disabled.
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
+ * frame template (binary).
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
+ */
+enum nl80211_unsol_bcast_probe_resp_attributes {
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
+
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+};
+
+/**
+ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
+ * derivation. Applicable only when WPA3-Personal SAE authentication is
+ * used.
+ *
+ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
+ * attribute is not present from userspace.
+ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
+ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
+ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
+ * can be used.
+ */
+enum nl80211_sae_pwe_mechanism {
+ NL80211_SAE_PWE_UNSPECIFIED,
+ NL80211_SAE_PWE_HUNT_AND_PECK,
+ NL80211_SAE_PWE_HASH_TO_ELEMENT,
+ NL80211_SAE_PWE_BOTH,
+};
+
+/**
+ * enum nl80211_sar_type - type of SAR specs
+ *
+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
+ *
+ */
+enum nl80211_sar_type {
+ NL80211_SAR_TYPE_POWER,
+
+ /* add new type here */
+
+ /* Keep last */
+ NUM_NL80211_SAR_TYPE,
+};
+
+/**
+ * enum nl80211_sar_attrs - Attributes for SAR spec
+ *
+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
+ *
+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
+ * limit specifications. Each specification contains a set
+ * of %nl80211_sar_specs_attrs.
+ *
+ * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
+ * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
+ *
+ * For sar_capa dump, it contains array of
+ * %NL80211_SAR_ATTR_SPECS_START_FREQ
+ * and %NL80211_SAR_ATTR_SPECS_END_FREQ.
+ *
+ * @__NL80211_SAR_ATTR_LAST: Internal
+ * @NL80211_SAR_ATTR_MAX: highest sar attribute
+ *
+ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
+ */
+enum nl80211_sar_attrs {
+ __NL80211_SAR_ATTR_INVALID,
+
+ NL80211_SAR_ATTR_TYPE,
+ NL80211_SAR_ATTR_SPECS,
+
+ __NL80211_SAR_ATTR_LAST,
+ NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
+ *
+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
+ * power limit value in units of 0.25 dBm if type is
+ * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
+ * 0 means userspace doesn't have SAR limitation on this associated range.
+ *
+ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
+ * index of exported freq range table and the associated power limitation
+ * is applied to this range.
+ *
+ * Userspace isn't required to set all the ranges advertised by WLAN driver,
+ * and userspace can skip some certain ranges. These skipped ranges don't
+ * have SAR limitations, and they are same as setting the
+ * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
+ * value higher than regulatory allowed value just means SAR power
+ * limitation is removed, but it's required to set at least one range.
+ * It's not allowed to set duplicated range in one SET operation.
+ *
+ * Every SET operation overwrites previous SET operation.
+ *
+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
+ */
+enum nl80211_sar_specs_attrs {
+ __NL80211_SAR_ATTR_SPECS_INVALID,
+
+ NL80211_SAR_ATTR_SPECS_POWER,
+ NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
+ NL80211_SAR_ATTR_SPECS_START_FREQ,
+ NL80211_SAR_ATTR_SPECS_END_FREQ,
+
+ __NL80211_SAR_ATTR_SPECS_LAST,
+ NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
+};
+
+/**
+ * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced
+ * multi-BSSID advertisements (EMA) in AP mode.
+ * Kernel uses some of these attributes to advertise driver's support for
+ * MBSSID and EMA.
+ * Remaining attributes should be used by the userspace to configure the
+ * features.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise
+ * the maximum number of MBSSID interfaces supported by the driver.
+ * Driver should indicate MBSSID support by setting
+ * wiphy->mbssid_max_interfaces to a value more than or equal to 2.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
+ * to advertise the maximum profile periodicity supported by the driver
+ * if EMA is enabled. Driver should indicate EMA support to the userspace
+ * by setting wiphy->ema_max_profile_periodicity to
+ * a non-zero value.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
+ * this BSS (u8) in the multiple BSSID set.
+ * Value must be set to 0 for the transmitting interface and non-zero for
+ * all non-transmitting interfaces. The userspace will be responsible
+ * for using unique indices for the interfaces.
+ * Range: 0 to wiphy->mbssid_max_interfaces-1.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for
+ * a non-transmitted profile which provides the interface index (u32) of
+ * the transmitted profile. The value must match one of the interface
+ * indices advertised by the kernel. Optional if the interface being set up
+ * is the transmitting one, however, if provided then the value must match
+ * the interface index of the same.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
+ * Setting this flag is permitted only if the driver advertises EMA support
+ * by setting wiphy->ema_max_profile_periodicity to non-zero.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
+ */
+enum nl80211_mbssid_config_attributes {
+ __NL80211_MBSSID_CONFIG_ATTR_INVALID,
+
+ NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES,
+ NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY,
+ NL80211_MBSSID_CONFIG_ATTR_INDEX,
+ NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX,
+ NL80211_MBSSID_CONFIG_ATTR_EMA,
+
+ /* keep last */
+ __NL80211_MBSSID_CONFIG_ATTR_LAST,
+ NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_ap_settings_flags - AP settings flags
+ *
+ * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
+ * authentication.
+ * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
+ * procedures offload to driver. If driver advertises
+ * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
+ * ignore SA Query procedures and validations when this flag is set by
+ * userspace.
+ */
+enum nl80211_ap_settings_flags {
+ NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0,
+ NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
+};