### Changes between 3.1 and 3.2 [xx XXX xxxx]
- * Added EC_GROUP_to_params which creates an OSSL_PARAM array
+ * Added a function to delete objects from store by URI - OSSL_STORE_delete()
+ and the corresponding provider-storemgmt API function
+ OSSL_FUNC_store_delete().
+
+ *Dmitry Belyavskiy*
+
+ * Added OSSL_FUNC_store_open_ex() provider-storemgmt API function to pass
+ a passphrase callback when opening a store.
+
+ *Simo Sorce*
+
+ * Changed the default salt length used by PBES2 KDF's (PBKDF2 and scrypt)
+ from 8 bytes to 16 bytes.
+ The PKCS5 (RFC 8018) standard uses a 64 bit salt length for PBE, and
+ recommends a minimum of 64 bits for PBES2. For FIPS compliance PBKDF2
+ requires a salt length of 128 bits. This affects OpenSSL command line
+ applications such as "genrsa" and "pkcs8" and API's such as
+ PEM_write_bio_PrivateKey() that are reliant on the default value.
+ The additional commandline option 'saltlen' has been added to the
+ OpenSSL command line applications for "pkcs8" and "enc" to allow the
+ salt length to be set to a non default value.
+
+ *Shane Lontis*
+
+ * Changed the default value of the `ess_cert_id_alg` configuration
+ option which is used to calculate the TSA's public key certificate
+ identifier. The default algorithm is updated to be sha256 instead
+ of sha1.
+
+ *Małgorzata Olszówka*
+
+ * Added optimization for SM2 algorithm on aarch64. It uses a huge precomputed
+ table for point multiplication of the base point, which increases the size of
+ libcrypto from 4.4 MB to 4.9 MB. A new configure option `no-sm2-precomp` has
+ been added to disable the precomputed table.
+
+ *Xu Yizhou*
+
+ * Added client side support for QUIC
+
+ *Hugo Landau, Matt Caswell, Paul Dale, Tomáš Mráz, Richard Levitte*
+
+ * Added multiple tutorials on the OpenSSL library and in particular
+ on writing various clients (using TLS and QUIC protocols) with libssl.
+
+ *Matt Caswell*
+
+ * Added secp384r1 implementation using Solinas' reduction to improve
+ speed of the NIST P-384 elliptic curve. To enable the implementation
+ the build option `enable-ec_nistp_64_gcc_128` must be used.
+
+ *Rohan McLure*
+
+ * Improved RFC7468 compliance of the asn1parse command.
+
+ *Matthias St. Pierre*
+
+ * Added SHA256/192 algorithm support.
+
+ *Fergus Dall*
+
+ * Added support for securely getting root CA certificate update in
+ CMP.
+
+ *David von Oheimb*
+
+ * Improved contention on global write locks by using more read locks where
+ appropriate.
+
+ *Matt Caswell*
+
+ * Improved performance of OSSL_PARAM lookups in performance critical
+ provider functions.
+
+ *Paul Dale*
+
+ * Added the SSL_get0_group_name() function to provide access to the
+ name of the group used for the TLS key exchange.
+
+ *Alex Bozarth*
+
+ * Provide a new configure option `no-http` that can be used to disable the
+ HTTP support. Provide new configure options `no-apps` and `no-docs` to
+ disable building the openssl command line application and the documentation.
+
+ *Vladimír Kotal*
+
+ * Provide a new configure option `no-ecx` that can be used to disable the
+ X25519, X448, and EdDSA support.
+
+ *Yi Li*
+
+ * When multiple OSSL_KDF_PARAM_INFO parameters are passed to
+ the EVP_KDF_CTX_set_params() function they are now concatenated not just
+ for the HKDF algorithm but also for SSKDF and X9.63 KDF algorithms.
+
+ *Paul Dale*
+
+ * Added OSSL_FUNC_keymgmt_im/export_types_ex() provider functions that get
+ the provider context as a parameter.
+
+ *Ingo Franzki*
+
+ * TLS round-trip time calculation was added by a Brigham Young University
+ Capstone team partnering with Sandia National Laboratories. A new function
+ in ssl_lib titled SSL_get_handshake_rtt will calculate and retrieve this
+ value.
+
+ *Jairus Christensen*
+
+ * Added the "-quic" option to s_client to enable connectivity to QUIC servers.
+ QUIC requires the use of ALPN, so this must be specified via the "-alpn"
+ option. Use of the "advanced" s_client command command via the "-adv" option
+ is recommended.
+
+ *Matt Caswell*
+
+ * Added an "advanced" command mode to s_client. Use this with the "-adv"
+ option. The old "basic" command mode recognises certain letters that must
+ always appear at the start of a line and cannot be escaped. The advanced
+ command mode enables commands to be entered anywhere and there is an
+ escaping mechanism. After starting s_client with "-adv" type "{help}"
+ to show a list of available commands.
+
+ *Matt Caswell*
+
+ * Add Raw Public Key (RFC7250) support. Authentication is supported
+ by matching keys against either local policy (TLSA records synthesised
+ from the expected keys) or DANE (TLSA records obtained by the
+ application from DNS). TLSA records will also match the same key in
+ the server certificate, should RPK use not happen to be negotiated.
+
+ *Todd Short*
+
+ * Added support for modular exponentiation and CRT offloading for the
+ S390x architecture.
+
+ *Juergen Christ*
+
+ * Added further assembler code for the RISC-V architecture.
+
+ *Christoph Müllner*
+
+ * Added EC_GROUP_to_params() which creates an OSSL_PARAM array
from a given EC_GROUP.
*Oliver Mihatsch*
+ * Improved support for non-default library contexts and property queries
+ when parsing PKCS#12 files.
+
+ *Shane Lontis*
+
+ * Implemented support for all five instances of EdDSA from RFC8032:
+ Ed25519, Ed25519ctx, Ed25519ph, Ed448, and Ed448ph.
+ The streaming is not yet supported for the HashEdDSA variants
+ (Ed25519ph and Ed448ph).
+
+ *James Muir*
+
+ * Added SM4 optimization for ARM processors using ASIMD and AES HW
+ instructions.
+
+ *Xu Yizhou*
+
+ * Implemented SM4-XTS support.
+
+ *Xu Yizhou*
+
+ * Added platform-agnostic OSSL_sleep() function.
+
+ *Richard Levitte*
+
+ * Implemented deterministic ECDSA signatures (RFC6979) support.
+
+ *Shane Lontis*
+
+ * Implemented AES-GCM-SIV (RFC8452) support.
+
+ *Todd Short*
+
* Added support for pluggable (provider-based) TLS signature algorithms.
This enables TLS 1.3 authentication operations with algorithms embedded
in providers not included by default in OpenSSL. In combination with
*Michael Baentsch*
+ * Added support for pluggable (provider-based) CMS signature algorithms.
+ This enables CMS sign and verify operations with algorithms embedded
+ in providers not included by default in OpenSSL.
+
+ *Michael Baentsch*
+
* Added support for Hybrid Public Key Encryption (HPKE) as defined
in RFC9180. HPKE is required for TLS Encrypted ClientHello (ECH),
Message Layer Security (MLS) and other IETF specifications.
*Stephen Farrell*
+ * Implemented HPKE DHKEM support in providers used by HPKE (RFC9180)
+ API.
+
+ *Shane Lontis*
+
* Add support for certificate compression (RFC8879), including
library support for Brotli and Zstandard compression.
*Graham Woodward*
- * Major refactor of the libssl record layer
-
- *Matt Caswell*
-
- * Added a new BIO_s_dgram_mem() to read/write datagrams to memory
+ * Major refactor of the libssl record layer.
*Matt Caswell*
*Darshan Sen*
+ * The PKCS12_parse() function now supports MAC-less PKCS12 files.
+
+ *Daniel Fiala*
+
+ * Added ASYNC_set_mem_functions() and ASYNC_get_mem_functions() calls to be able
+ to change functions used for allocating the memory of asynchronous call stack.
+
+ *Arran Cudbard-Bell*
+
+ * Added support for signed BIGNUMs in the OSSL_PARAM APIs.
+
+ *Richard Levitte*
+
+ * A failure exit code is returned when using the openssl x509 command to check
+ certificate attributes and the checks fail.
+
+ *Rami Khaldi*
+
* The default SSL/TLS security level has been changed from 1 to 2. RSA,
DSA and DH keys of 1024 bits and above and less than 2048 bits and ECC keys
of 160 bits and above and less than 224 bits were previously accepted by
will need to load the legacy crypto provider.
*Paul Dale*
+
* CCM8 cipher suites in TLS have been downgraded to security level zero
because they use a short authentication tag which lowers their strength.
*David von Oheimb*
- * `CMS_add0_cert()` and `CMS_add1_cert()` no more throw an error
- if a certificate to be added is already present.
- * `CMS_sign_ex()` and `CMS_sign()` now ignore any duplicate certificates
- in their `certs` argument and no longer throw an error for them.
+ * `CMS_add0_cert()` and `CMS_add1_cert()` no longer throw an error if
+ a certificate to be added is already present. `CMS_sign_ex()` and
+ `CMS_sign()` now ignore any duplicate certificates in their `certs` argument
+ and no longer throw an error for them.
*David von Oheimb*
*David von Oheimb*
+ * Added BIO_s_dgram_pair() and BIO_s_dgram_mem() that provide memory-based
+ BIOs with datagram semantics and support for BIO_sendmmsg() and BIO_recvmmsg()
+ calls. They can be used as the transport BIOs for QUIC.
+
+ *Hugo Landau, Matt Caswell and Tomáš Mráz*
+
* Add new BIO_sendmmsg() and BIO_recvmmsg() BIO methods which allow
sending and receiving multiple messages in a single call. An implementation
is provided for BIO_dgram. For further details, see BIO_sendmmsg(3).
*Hugo Landau*
- * The `SSL_CERT_PATH` and `SSL_CERT_URI` environment variables are introduced.
- `SSL_CERT_URI` can be used to specify a URI for a root certificate store. The
- `SSL_CERT_PATH` environment variable specifies a delimiter-separated list of
- paths which are searched for root certificates.
-
- The existing `SSL_CERT_DIR` environment variable is deprecated.
- `SSL_CERT_DIR` was previously used to specify either a delimiter-separated
- list of paths or an URI, which is ambiguous. Setting `SSL_CERT_PATH` causes
- `SSL_CERT_DIR` to be ignored for the purposes of determining root certificate
- directories, and setting `SSL_CERT_URI` causes `SSL_CERT_DIR` to be ignored
- for the purposes of determining root certificate stores.
-
- *Hugo Landau*
-
* Support for loading root certificates from the Windows certificate store
has been added. The support is in the form of a store which recognises the
- URI string of `org.openssl.winstore://`. This store is enabled by default and
- can be disabled using the new compile-time option `no-winstore`.
+ URI string of `org.openssl.winstore://`. This URI scheme currently takes no
+ arguments. This store is built by default and can be disabled using the new
+ compile-time option `no-winstore`. This store is not currently used by
+ default and must be loaded explicitly using the above store URI. It is
+ expected to be loaded by default in the future.
*Hugo Landau*
*Tianjia Zhang*
+ * Added `-ktls` option to `s_server` and `s_client` commands to enable the
+ KTLS support.
+
+ *Tianjia Zhang*
+
* Zerocopy KTLS sendfile() support on Linux.
*Maxim Mikityanskiy*
+ * The OBJ_ calls are now thread safe using a global lock.
+
+ *Paul Dale*
+
+ * New parameter `-digest` for openssl cms command allowing signing
+ pre-computed digests and new CMS API functions supporting that
+ functionality.
+
+ *Viktor Söderqvist*
+
+ * OPENSSL_malloc() and other allocation functions now raise errors on
+ allocation failures. The callers do not need to explicitly raise errors
+ unless they want to for tracing purposes.
+
+ *David von Oheimb*
+
* Added and enabled by default implicit rejection in RSA PKCS#1 v1.5
decryption as a protection against Bleichenbacher-like attacks.
The RSA decryption API will now return a randomly generated deterministic
*Hubert Kario*
+ * Added support for Brainpool curves in TLS-1.3.
+
+ *Bernd Edlinger and Matt Caswell*
+
+ * Added OpenBSD specific build targets.
+
+ *David Carlier*
+
* Support for Argon2d, Argon2i, Argon2id KDFs has been added along with
- basic thread pool implementation for select platforms.
+ a basic thread pool implementation for select platforms.
*Čestmír Kalina*
OpenSSL 3.1
-----------
-### Changes between 3.1.0 and 3.1.1 [xx XXX xxxx]
+### Changes between 3.1.2 and 3.1.3 [xx XXX xxxx]
+
+ * Fix POLY1305 MAC implementation corrupting XMM registers on Windows.
+
+ The POLY1305 MAC (message authentication code) implementation in OpenSSL
+ does not save the contents of non-volatile XMM registers on Windows 64
+ platform when calculating the MAC of data larger than 64 bytes. Before
+ returning to the caller all the XMM registers are set to zero rather than
+ restoring their previous content. The vulnerable code is used only on newer
+ x86_64 processors supporting the AVX512-IFMA instructions.
+
+ The consequences of this kind of internal application state corruption can
+ be various - from no consequences, if the calling application does not
+ depend on the contents of non-volatile XMM registers at all, to the worst
+ consequences, where the attacker could get complete control of the
+ application process. However given the contents of the registers are just
+ zeroized so the attacker cannot put arbitrary values inside, the most likely
+ consequence, if any, would be an incorrect result of some application
+ dependent calculations or a crash leading to a denial of service.
+
+ ([CVE-2023-4807])
+
+ *Bernd Edlinger*
+
+### Changes between 3.1.1 and 3.1.2 [1 Aug 2023]
+
+ * Fix excessive time spent checking DH q parameter value.
+
+ The function DH_check() performs various checks on DH parameters. After
+ fixing CVE-2023-3446 it was discovered that a large q parameter value can
+ also trigger an overly long computation during some of these checks.
+ A correct q value, if present, cannot be larger than the modulus p
+ parameter, thus it is unnecessary to perform these checks if q is larger
+ than p.
+
+ If DH_check() is called with such q parameter value,
+ DH_CHECK_INVALID_Q_VALUE return flag is set and the computationally
+ intensive checks are skipped.
+
+ ([CVE-2023-3817])
+
+ *Tomáš Mráz*
+
+ * Fix DH_check() excessive time with over sized modulus.
+
+ The function DH_check() performs various checks on DH parameters. One of
+ those checks confirms that the modulus ("p" parameter) is not too large.
+ Trying to use a very large modulus is slow and OpenSSL will not normally use
+ a modulus which is over 10,000 bits in length.
+
+ However the DH_check() function checks numerous aspects of the key or
+ parameters that have been supplied. Some of those checks use the supplied
+ modulus value even if it has already been found to be too large.
+
+ A new limit has been added to DH_check of 32,768 bits. Supplying a
+ key/parameters with a modulus over this size will simply cause DH_check() to
+ fail.
+
+ ([CVE-2023-3446])
+
+ *Matt Caswell*
+
+ * Do not ignore empty associated data entries with AES-SIV.
+
+ The AES-SIV algorithm allows for authentication of multiple associated
+ data entries along with the encryption. To authenticate empty data the
+ application has to call `EVP_EncryptUpdate()` (or `EVP_CipherUpdate()`)
+ with NULL pointer as the output buffer and 0 as the input buffer length.
+ The AES-SIV implementation in OpenSSL just returns success for such call
+ instead of performing the associated data authentication operation.
+ The empty data thus will not be authenticated. ([CVE-2023-2975])
+
+ Thanks to Juerg Wullschleger (Google) for discovering the issue.
+
+ The fix changes the authentication tag value and the ciphertext for
+ applications that use empty associated data entries with AES-SIV.
+ To decrypt data encrypted with previous versions of OpenSSL the application
+ has to skip calls to `EVP_DecryptUpdate()` for empty associated data
+ entries.
+
+ *Tomáš Mráz*
+
+ * When building with the `enable-fips` option and using the resulting
+ FIPS provider, TLS 1.2 will, by default, mandate the use of an extended
+ master secret (FIPS 140-3 IG G.Q) and the Hash and HMAC DRBGs will
+ not operate with truncated digests (FIPS 140-3 IG G.R).
+
+ *Paul Dale*
+
+### Changes between 3.1.0 and 3.1.1 [30 May 2023]
+
+ * Mitigate for the time it takes for `OBJ_obj2txt` to translate gigantic
+ OBJECT IDENTIFIER sub-identifiers to canonical numeric text form.
+
+ OBJ_obj2txt() would translate any size OBJECT IDENTIFIER to canonical
+ numeric text form. For gigantic sub-identifiers, this would take a very
+ long time, the time complexity being O(n^2) where n is the size of that
+ sub-identifier. ([CVE-2023-2650])
+
+ To mitigitate this, `OBJ_obj2txt()` will only translate an OBJECT
+ IDENTIFIER to canonical numeric text form if the size of that OBJECT
+ IDENTIFIER is 586 bytes or less, and fail otherwise.
+
+ The basis for this restriction is [RFC 2578 (STD 58), section 3.5]. OBJECT
+ IDENTIFIER values, which stipulates that OBJECT IDENTIFIERS may have at
+ most 128 sub-identifiers, and that the maximum value that each sub-
+ identifier may have is 2^32-1 (4294967295 decimal).
+
+ For each byte of every sub-identifier, only the 7 lower bits are part of
+ the value, so the maximum amount of bytes that an OBJECT IDENTIFIER with
+ these restrictions may occupy is 32 * 128 / 7, which is approximately 586
+ bytes.
+
+ *Richard Levitte*
+
+ * Multiple algorithm implementation fixes for ARM BE platforms.
+
+ *Liu-ErMeng*
+
+ * Added a -pedantic option to fipsinstall that adjusts the various
+ settings to ensure strict FIPS compliance rather than backwards
+ compatibility.
+
+ *Paul Dale*
+
+ * Fixed buffer overread in AES-XTS decryption on ARM 64 bit platforms which
+ happens if the buffer size is 4 mod 5 in 16 byte AES blocks. This can
+ trigger a crash of an application using AES-XTS decryption if the memory
+ just after the buffer being decrypted is not mapped.
+ Thanks to Anton Romanov (Amazon) for discovering the issue.
+ ([CVE-2023-1255])
+
+ *Nevine Ebeid*
+
+ * Reworked the Fix for the Timing Oracle in RSA Decryption ([CVE-2022-4304]).
+ The previous fix for this timing side channel turned out to cause
+ a severe 2-3x performance regression in the typical use case
+ compared to 3.0.7. The new fix uses existing constant time
+ code paths, and restores the previous performance level while
+ fully eliminating all existing timing side channels.
+ The fix was developed by Bernd Edlinger with testing support
+ by Hubert Kario.
+
+ *Bernd Edlinger*
+
+ * Add FIPS provider configuration option to disallow the use of
+ truncated digests with Hash and HMAC DRBGs (q.v. FIPS 140-3 IG D.R.).
+ The option '-no_drbg_truncated_digests' can optionally be
+ supplied to 'openssl fipsinstall'.
+
+ *Paul Dale*
+
+ * Corrected documentation of X509_VERIFY_PARAM_add0_policy() to mention
+ that it does not enable policy checking. Thanks to David Benjamin for
+ discovering this issue.
+ ([CVE-2023-0466])
+
+ *Tomáš Mráz*
* Fixed an issue where invalid certificate policies in leaf certificates are
silently ignored by OpenSSL and other certificate policy checks are skipped
3-prime RSA1536, and DSA1024 as a result of this defect would be very
difficult to perform and are not believed likely. Attacks against DH512
are considered just feasible. However, for an attack the target would
- have to re-use the DH512 private key, which is not recommended anyway.
+ have to reuse the DH512 private key, which is not recommended anyway.
Also applications directly using the low-level API BN_mod_exp may be
affected if they use BN_FLG_CONSTTIME.
([CVE-2019-1551])
* Alternate chains certificate forgery
- During certificate verfification, OpenSSL will attempt to find an
+ During certificate verification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
3. Check DSA/ECDSA signatures use DER.
- Reencode DSA/ECDSA signatures and compare with the original received
+ Re-encode DSA/ECDSA signatures and compare with the original received
signature. Return an error if there is a mismatch.
This will reject various cases including garbage after signature
* Add additional DigestInfo checks.
- Reencode DigestInto in DER and check against the original when
+ Re-encode DigestInto in DER and check against the original when
verifying RSA signature: this will reject any improperly encoded
DigestInfo structures.
<!-- Links -->
+[CVE-2023-4807]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-4807
+[CVE-2023-3817]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-3817
+[CVE-2023-3446]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-3446
+[CVE-2023-2975]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-2975
+[RFC 2578 (STD 58), section 3.5]: https://datatracker.ietf.org/doc/html/rfc2578#section-3.5
+[CVE-2023-2650]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-2650
+[CVE-2023-1255]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-1255
+[CVE-2023-0466]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-0466
[CVE-2023-0465]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-0465
[CVE-2023-0464]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-0464
[CVE-2023-0401]: https://www.openssl.org/news/vulnerabilities.html#CVE-2023-0401
projects / thirdparty / openssl.git / blobdiff