-# Copyright (C) 1991-2014 Free Software Foundation, Inc.
+# Copyright (C) 1991-2017 Free Software Foundation, Inc.
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
include $(common-objpfx)config.make
# What flags to give to sources which call user provided callbacks
-uses-callbacks = $(exceptions)
+uses-callbacks = -fexceptions
# What flags to give to tests which test stack alignment
stack-align-test-flags =
# `configure' writes a definition of `config-sysdirs' in `config.make'.
sysdirs := $(foreach D,$(config-sysdirs),$(firstword $(filter /%,$D) $(..)$D))
-# Add-ons that contribute sysdeps trees get added to the include list
-# after sysdeps/generic. This makes #include <sysdeps/...> work right
-# to find specific add-on files without assuming the add-on directory name.
-# It also means that headers can go into an add-on's base directory
-# instead of the add-on needing a sysdeps/generic of its own.
-sysdeps-srcdirs := $(foreach add-on,$(sysdeps-add-ons),\
- $(firstword $(filter /%,$(add-on)) \
- $(..)$(add-on)))
-+sysdep_dirs = $(sysdirs) $(sysdeps-srcdirs)
++sysdep_dirs = $(sysdirs)
ifdef objdir
+sysdep_dirs := $(objdir) $(+sysdep_dirs)
endif
$(..)config.make.in $(..)config.h.in
cd $(<D); $(SHELL) $(<F)
-# Find all the add-on and sysdeps configure fragments, to make sure we
-# re-run configure when any of them changes.
+# Find all the sysdeps configure fragments, to make sure we re-run
+# configure when any of them changes.
$(common-objpfx)config.status: $(..)version.h $(..)configure \
$(foreach dir,$(sysdirs),\
$(wildcard $(dir)/Implies) \
$(firstword $(wildcard \
$(addprefix $(dir)/,configure configure.ac))))) \
$(patsubst %.ac,%,\
- $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.ac)) \
- $(patsubst %.ac,%,\
- $(foreach add-on,$(add-ons),\
- $(firstword $(wildcard \
- $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- configure configure.ac))) \
- $(wildcard $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- sysdeps/*/preconfigure sysdeps/*/preconfigure.ac))))
+ $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.ac))
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
endif
inst_zonedir = $(install_root)$(zonedir)
-# Where to install the locale files.
-ifndef localedir
-localedir = $(libdir)/locale
+# Where to install the compiled binary locale archive and compiled
+# binary locale files.
+ifndef complocaledir
+complocaledir = $(libdir)/locale
endif
-inst_localedir = $(install_root)$(localedir)
+inst_complocaledir = $(install_root)$(complocaledir)
# Where to install the message catalog data files (which are
# machine-independent).
-ifndef msgcatdir
-msgcatdir = $(datadir)/locale
+ifndef localedir
+localedir = $(datadir)/locale
endif
-inst_msgcatdir = $(install_root)$(msgcatdir)
+inst_localedir = $(install_root)$(localedir)
# Where to install the locale charmap source files.
ifndef i18ndir
endif
# Flags to pass the C compiler when assembling preprocessed assembly code
-# (`.S' files). On some systems the assembler doesn't understand the `#' line
-# directives the preprocessor produces. If you have troubling compiling
-# assembly code, try using -P here to suppress these directives.
+# (`.S' files).
ifndef asm-CPPFLAGS
asm-CPPFLAGS =
endif
LDFLAGS-rtld += $(hashstyle-LDFLAGS)
endif
+# If lazy relocations are disabled, add the -z now flag. Use
+# LDFLAGS-lib.so instead of LDFLAGS.so, to avoid adding the flag to
+# test modules.
+ifeq ($(bind-now),yes)
+LDFLAGS-lib.so += -Wl,-z,now
+endif
+
+# Command to run after every final link (executable or shared object).
+# This is invoked with $(call after-link,...), so it should operate on
+# the file $1. This can be set to do some sort of post-processing on
+# binaries, or to perform some sort of static sanity check.
+ifndef after-link
+after-link =
+endif
+
+# Additional libraries to link into every test.
+link-extra-libs-tests = $(libsupport)
+
# Command for linking PIE programs with the C library.
ifndef +link-pie
+link-pie-before-libc = $(CC) -pie -Wl,-O1 -nostdlib -nostartfiles -o $@ \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
- $(addprefix $(csu-objpfx),S$(start-installed-name)) \
+ $(firstword $(CRT-$(@F)) $(csu-objpfx)S$(start-installed-name)) \
$(+preinit) $(+prectorS) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
S$(start-installed-name))\
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs)
+link-pie-after-libc = $(+postctorS) $(+postinit)
-+link-pie = $(+link-pie-before-libc) $(rtld-LDFLAGS) $(link-libc) \
- $(+link-pie-after-libc)
-+link-pie-tests = $(+link-pie-before-libc) $(rtld-tests-LDFLAGS) \
- $(link-libc-tests) $(+link-pie-after-libc)
+define +link-pie
+$(+link-pie-before-libc) $(rtld-LDFLAGS) $(link-libc) $(+link-pie-after-libc)
+$(call after-link,$@)
+endef
+define +link-pie-tests
+$(+link-pie-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \
+ $(+link-pie-after-libc)
+$(call after-link,$@)
+endef
+define +link-pie-printers-tests
+$(+link-pie-before-libc) $(built-rtld-LDFLAGS) $(link-libc-printers-tests) \
+ $(+link-pie-after-libc)
+$(call after-link,$@)
+endef
endif
# Command for statically linking programs with the C library.
ifndef +link-static
+link-static-before-libc = $(CC) -nostdlib -nostartfiles -static -o $@ \
+ $(DEFAULT-LDFLAGS-$(@F)) \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
- $(addprefix $(csu-objpfx),$(static-start-installed-name)) \
+ $(firstword $(CRT-$(@F)) $(csu-objpfx)$(static-start-installed-name)) \
$(+preinit) $(+prectorT) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
$(start-installed-name))\
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs-static)
+link-static-after-libc = $(+postctorT) $(+postinit)
-+link-static = $(+link-static-before-libc) $(link-libc-static) \
- $(+link-static-after-libc)
-+link-static-tests = $(+link-static-before-libc) $(link-libc-static-tests) \
- $(+link-static-after-libc)
+define +link-static
+$(+link-static-before-libc) $(link-libc-static) $(+link-static-after-libc)
+$(call after-link,$@)
+endef
+define +link-static-tests
+$(+link-static-before-libc) $(link-libc-static-tests) $(+link-static-after-libc)
+$(call after-link,$@)
+endef
endif
# Commands for linking programs with the C library.
ifndef +link
ifeq (yes,$(build-shared))
+ifeq (yes,$(build-pie-default))
+no-pie-ldflag = -no-pie
++link = $(+link-pie)
++link-tests = $(+link-pie-tests)
++link-printers-tests = $(+link-pie-printers-tests)
+else # not build-pie-default
+link-before-libc = $(CC) -nostdlib -nostartfiles -o $@ \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
- $(addprefix $(csu-objpfx),$(start-installed-name)) \
+ $(firstword $(CRT-$(@F)) $(csu-objpfx)$(start-installed-name)) \
$(+preinit) $(+prector) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
$(start-installed-name))\
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs)
+link-after-libc = $(+postctor) $(+postinit)
-+link = $(+link-before-libc) $(rtld-LDFLAGS) $(link-libc) \
- $(+link-after-libc)
-+link-tests = $(+link-before-libc) $(rtld-tests-LDFLAGS) \
- $(link-libc-tests) $(+link-after-libc)
-else
+define +link
+$(+link-before-libc) $(rtld-LDFLAGS) $(link-libc) $(+link-after-libc)
+$(call after-link,$@)
+endef
+define +link-tests
+$(+link-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \
+ $(+link-after-libc)
+$(call after-link,$@)
+endef
+define +link-printers-tests
+$(+link-before-libc) $(built-rtld-LDFLAGS) $(link-libc-printers-tests) \
+ $(+link-after-libc)
+$(call after-link,$@)
+endef
+endif # build-pie-default
+else # build-static
+link = $(+link-static)
+link-tests = $(+link-static-tests)
-endif
-endif
++link-printers-tests = $(+link-static-tests)
+endif # build-shared
+endif # +link
+
+# The pretty printer test programs need to be compiled without optimizations
+# so they won't confuse gdb. We could use either the 'GCC optimize' pragma
+# or the 'optimize' function attribute to achieve this; however, at least on
+# ARM, gcc always produces different debugging symbols when invoked with
+# a -O greater than 0 than when invoked with -O0, regardless of anything else
+# we're using to suppress optimizations. Therefore, we need to explicitly pass
+# -O0 to it through CFLAGS.
+# Additionally, the build system will try to -include $(common-objpfx)/config.h
+# when compiling the tests, which will throw an error if some special macros
+# (such as __OPTIMIZE__ and IS_IN_build) aren't defined. To avoid this, we
+# tell gcc to define IS_IN_build.
+CFLAGS-printers-tests := -O0 -ggdb3 -DIS_IN_build
+
ifeq (yes,$(build-shared))
+# These indicate whether to link using the built ld.so or the installed one.
+installed-rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name)
+built-rtld-LDFLAGS = -Wl,-dynamic-linker=$(elf-objpfx)ld.so
+
ifndef rtld-LDFLAGS
-rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name)
+rtld-LDFLAGS = $(installed-rtld-LDFLAGS)
endif
+
ifndef rtld-tests-LDFLAGS
ifeq (yes,$(build-hardcoded-path-in-tests))
-rtld-tests-LDFLAGS = -Wl,-dynamic-linker=$(elf-objpfx)ld.so
+rtld-tests-LDFLAGS = $(built-rtld-LDFLAGS)
else
-rtld-tests-LDFLAGS = $(rtld-LDFLAGS)
-endif
-endif
-endif
+rtld-tests-LDFLAGS = $(installed-rtld-LDFLAGS)
+endif # build-hardcoded-path-in-tests
+endif # rtld-tests-LDFLAGS
+
+endif # build-shared
+
ifndef link-libc
ifeq (yes,$(build-shared))
# We need the versioned name of libc.so in the deps of $(others) et al
# so that the symlink to libc.so is created before anything tries to
# run the linked programs.
+link-libc-rpath = -Wl,-rpath=$(rpath-link)
link-libc-rpath-link = -Wl,-rpath-link=$(rpath-link)
+
ifeq (yes,$(build-hardcoded-path-in-tests))
-link-libc-tests-rpath-link = -Wl,-rpath=$(rpath-link)
+link-libc-tests-rpath-link = $(link-libc-rpath)
else
link-libc-tests-rpath-link = $(link-libc-rpath-link)
-endif
+endif # build-hardcoded-path-in-tests
+
link-libc-before-gnulib = $(common-objpfx)libc.so$(libc.so-version) \
$(common-objpfx)$(patsubst %,$(libtype.oS),c) \
$(as-needed) $(elf-objpfx)ld.so \
$(no-as-needed)
link-libc = $(link-libc-rpath-link) $(link-libc-before-gnulib) $(gnulib)
+
+link-libc-tests-after-rpath-link = $(link-libc-before-gnulib) $(gnulib-tests)
link-libc-tests = $(link-libc-tests-rpath-link) \
- $(link-libc-before-gnulib) $(gnulib-tests)
+ $(link-libc-tests-after-rpath-link)
+# Pretty printer test programs always require rpath instead of rpath-link.
+link-libc-printers-tests = $(link-libc-rpath) \
+ $(link-libc-tests-after-rpath-link)
+
# This is how to find at build-time things that will be installed there.
-rpath-dirs = math elf dlfcn nss nis rt resolv crypt
+rpath-dirs = math elf dlfcn nss nis rt resolv crypt mathvec support
rpath-link = \
$(common-objdir):$(subst $(empty) ,:,$(patsubst ../$(subdir),.,$(rpath-dirs:%=$(common-objpfx)%)))
-else
+else # build-static
link-libc = $(common-objpfx)libc.a $(otherlibs) $(gnulib) $(common-objpfx)libc.a $(gnulib)
link-libc-tests = $(common-objpfx)libc.a $(otherlibs) $(gnulib-tests) $(common-objpfx)libc.a $(gnulib-tests)
-endif
-endif
+endif # build-shared
+endif # link-libc
# Differences in the linkers on the various platforms.
LDFLAGS-rpath-ORIGIN = -Wl,-rpath,'$$ORIGIN'
# Variants of the two previous definitions for statically linking programs.
+prectorT = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtbeginT.o`
+postctorT = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtend.o`
-+interp = $(addprefix $(elf-objpfx),interp.os)
csu-objpfx = $(common-objpfx)csu/
elf-objpfx = $(common-objpfx)elf/
ifndef test-wrapper-env
test-wrapper-env = $(test-wrapper) env
endif
+# Likewise, but the program's environment will be empty except for any
+# explicit <variable>=<value> assignments preceding the program name.
+ifndef test-wrapper-env-only
+test-wrapper-env-only = $(test-wrapper) env -i
+endif
# Whether to run test programs built for the library's host system.
ifndef run-built-tests
else
run-via-rtld-prefix =
endif
+# $(run-program-env) is the default environment variable settings to
+# use when running a program built with the newly built library.
+run-program-env = GCONV_PATH=$(common-objpfx)iconvdata \
+ LOCPATH=$(common-objpfx)localedata LC_ALL=C
# $(run-program-prefix) is a command that, when prepended to the name
# of a program built with the newly built library, produces a command
# that, executed on the build system on which "make" is run, runs that
-# program.
-run-program-prefix = $(test-wrapper) $(run-via-rtld-prefix)
+# program. $(run-program-prefix-before-env) and
+# $(run-program-prefix-after-env) are similar, but separate parts
+# before and after a list of environment variables.
+run-program-prefix-before-env = $(test-wrapper-env)
+run-program-prefix-after-env = $(run-via-rtld-prefix)
+run-program-prefix = $(run-program-prefix-before-env) $(run-program-env) \
+ $(run-program-prefix-after-env)
# $(built-program-cmd) is a command that, executed on the build system
# on which "make" is run, runs the newly built program that is the
# second dependency of the makefile target in which
-# $(built-program-cmd) is used.
-built-program-cmd = $(test-wrapper) \
- $(run-via-rtld-prefix) $(built-program-file)
+# $(built-program-cmd) is used. $(built-program-cmd-before-env) and
+# $(built-program-cmd-after-env) are similar, before and after a list
+# of environment variables.
+built-program-cmd-before-env = $(test-wrapper-env)
+built-program-cmd-after-env = $(run-via-rtld-prefix) $(built-program-file)
+built-program-cmd = $(built-program-cmd-before-env) $(run-program-env) \
+ $(built-program-cmd-after-env)
# $(host-built-program-cmd) is a command that, executed on the host
# for which the library is built, runs the newly built program that is
# the second dependency of the makefile target in which
# $(test-program-prefix) is a command that, when prepended to the name
# of a test program built with the newly built library, produces a command
# that, executed on the build system on which "make" is run, runs that
-# test program.
+# test program. $(test-program-prefix-before-env) and
+# $(test-program-prefix-after-env) are similar, before and after a
+# list of environment variables.
# $(test-program-cmd) is a command that, executed on the build system
# on which "make" is run, runs the newly built test program that is the
# second dependency of the makefile target in which
-# $(test-program-cmd) is used.
+# $(test-program-cmd) is used. $(test-program-cmd-before-env) and
+# $(test-program-cmd-after-env) are similar, before and after a list
+# of environment variables.
# $(host-test-program-cmd) is a command that, executed on the host
# for which the library is built, runs the newly built test program that
ifeq (yes,$(build-hardcoded-path-in-tests))
test-via-rtld-prefix =
-test-program-prefix = $(test-wrapper)
-test-program-cmd = $(test-wrapper) $(built-program-file)
+test-program-prefix-before-env = $(test-wrapper-env)
+test-program-prefix-after-env =
+test-program-prefix = $(test-program-prefix-before-env) $(run-program-env) \
+ $(test-program-prefix-after-env)
+test-program-cmd-before-env = $(test-wrapper-env)
+test-program-cmd-after-env = $(built-program-file)
+test-program-cmd = $(test-program-cmd-before-env) $(run-program-env) \
+ $(test-program-cmd-after-env)
host-test-program-cmd = $(built-program-file)
else
test-via-rtld-prefix = $(run-via-rtld-prefix)
+test-program-prefix-before-env = $(run-program-prefix-before-env)
+test-program-prefix-after-env = $(run-program-prefix-after-env)
test-program-prefix = $(run-program-prefix)
+test-program-cmd-before-env = $(built-program-cmd-before-env)
+test-program-cmd-after-env = $(built-program-cmd-after-env)
test-program-cmd = $(built-program-cmd)
host-test-program-cmd = $(host-built-program-cmd)
endif
# Extra flags to pass to GCC.
ifeq ($(all-warnings),yes)
-+gccwarn := -Wall -Wwrite-strings -Winline -Wcast-qual -Wbad-function-cast -Wmissing-noreturn -Wmissing-prototypes -Wmissing-declarations -Wcomment -Wcomments -Wtrigraphs -Wsign-compare -Wfloat-equal -Wmultichar
++gccwarn := -Wall -Wwrite-strings -Wcast-qual -Wbad-function-cast -Wmissing-noreturn -Wmissing-prototypes -Wmissing-declarations -Wcomment -Wcomments -Wtrigraphs -Wsign-compare -Wfloat-equal -Wmultichar
else
-+gccwarn := -Wall -Wwrite-strings -Winline
++gccwarn := -Wall -Wwrite-strings
endif
+gccwarn += -Wundef
-+gccwarn-c = -Wstrict-prototypes
+ifeq ($(enable-werror),yes)
++gccwarn += -Werror
+endif
++gccwarn-c = -Wstrict-prototypes -Wold-style-definition
# We do not depend on the address of constants in different files to be
# actually different, so allow the compiler to merge them all.
# disable any optimization that assume default rounding mode.
+math-flags = -frounding-math
+# We might want to compile with some stack-protection flag.
+ifneq ($(stack-protector),)
++stack-protector=$(stack-protector)
+endif
+
# This is the program that generates makefile dependencies from C source files.
# The -MP flag tells GCC >= 3.2 (which we now require) to produce dummy
# targets for headers so that removed headers don't break the build.
+cflags := $(default_cflags)
endif # $(+cflags) == ""
-+cflags += $(cflags-cpu) $(+gccwarn) $(+merge-constants) $(+math-flags)
++cflags += $(cflags-cpu) $(+gccwarn) $(+merge-constants) $(+math-flags) \
+ $(+stack-protector)
+gcc-nowarn := -w
# Don't duplicate options if we inherited variables from the parent.
# of many little headers in the include directory.
libio-include = -I$(..)libio
+# List of non-library modules that we build.
+built-modules = iconvprogs iconvdata ldconfig lddlibc4 libmemusage \
+ libSegFault libpcprofile librpcsvc locale-programs \
+ memusagestat nonlib nscd extramodules libnldbl libsupport \
+ testsuite
+
+in-module = $(subst -,_,$(firstword $(libof-$(basename $(@F))) \
+ $(libof-$(<F)) \
+ $(libof-$(@F)) \
+ libc))
+
+# Build ld.so, libc.so and libpthread.so with -ftls-model=initial-exec
+tls-model = $(if $(filter libpthread rtld \
+ libc,$(in-module)),-ftls-model=initial-exec,)
+
+module-cppflags-real = -include $(common-objpfx)libc-modules.h \
+ -DMODULE_NAME=$(in-module)
+
+# We don't need libc-modules.h and the MODULE_NAME definition for .v.i
+# files. These targets don't (and will likely never need to) use the IS_IN
+# facility. In fact, shlib-versions should not use it because that will
+# create a circular dependency as libc-modules.h is generated from
+# shlib-versions.
+module-cppflags = $(if $(filter %.v.i,$(@F)),,$(module-cppflags-real))
+
# These are the variables that the implicit compilation rules use.
# Note that we can't use -std=* in CPPFLAGS, because it overrides
# the implicit -lang-asm and breaks cpp behavior for .S files--notably
# it causes cpp to stop predefining __ASSEMBLER__.
CPPFLAGS = $(config-extra-cppflags) $(CPPUNDEFS) $(CPPFLAGS-config) \
$($(subdir)-CPPFLAGS) \
- $(+includes) $(defines) \
+ $(+includes) $(defines) $(module-cppflags) \
-include $(..)include/libc-symbols.h $(sysdep-CPPFLAGS) \
$(CPPFLAGS-$(suffix $@)) \
$(foreach lib,$(libof-$(basename $(@F))) \
$(libof-$(<F)) $(libof-$(@F)),$(CPPFLAGS-$(lib))) \
$(CPPFLAGS-$(<F)) $(CPPFLAGS-$(@F)) $(CPPFLAGS-$(basename $(@F)))
-override CFLAGS = -std=gnu99 $(gnu89-inline-CFLAGS) $(config-extra-cflags) \
+
+ifneq (no,$(have-tunables))
+CPPFLAGS += -DTOP_NAMESPACE=glibc
+endif
+
+override CFLAGS = -std=gnu11 -fgnu89-inline $(config-extra-cflags) \
$(filter-out %frame-pointer,$(+cflags)) $(+gccwarn-c) \
$(sysdep-CFLAGS) $(CFLAGS-$(suffix $@)) $(CFLAGS-$(<F)) \
- $(CFLAGS-$(@F)) \
+ $(CFLAGS-$(@F)) $(tls-model) \
$(foreach lib,$(libof-$(basename $(@F))) \
$(libof-$(<F)) $(libof-$(@F)),$(CFLAGS-$(lib)))
-override CXXFLAGS = $(c++-sysincludes) \
+# Use our copies of cstdlib and cmath.
+override CXXFLAGS = -I$(common-objpfx) $(c++-sysincludes) \
$(filter-out %frame-pointer,$(+cflags)) $(sysdep-CFLAGS) \
$(CFLAGS-$(suffix $@)) $(CFLAGS-$(<F)) $(CFLAGS-$(@F))
# The compilation rules use $(CPPFLAGS-${SUFFIX}) and $(CFLAGS-${SUFFIX})
# to pass different flags for each flavor.
libtypes = $(foreach o,$(object-suffixes-for-libc),$(libtype$o))
-all-object-suffixes := .o .os .op .og .oS
+# .op may be added to all-object-suffixes below.
+all-object-suffixes := .o .os .oS
object-suffixes :=
CPPFLAGS-.o = $(pic-default)
CFLAGS-.o = $(filter %frame-pointer,$(+cflags))
ifeq (yes,$(build-profile))
# Under --enable-profile, we will build a static library of profiled objects.
# The profiled object files are named foo.op.
+all-object-suffixes += .op
object-suffixes += .op
CPPFLAGS-.op = -DPROF $(pic-default)
CFLAGS-.op = -pg
ifndef ASFLAGS
ASFLAGS := $(filter -g% -fdebug-prefix-map=%,$(CFLAGS))
endif
-ASFLAGS += $(ASFLAGS-config) $(asflags-cpu)
+ASFLAGS += -Werror=undef $(ASFLAGS-config) $(asflags-cpu)
ifndef BUILD_CC
BUILD_CC = $(CC)
ifeq ($(sysd-sorted-done),t)
-include $(common-objpfx)soversions.mk
ifndef avoid-generated
-# This lets add-ons give more-specific matches that override defaults
-# in the top-level file.
$(common-objpfx)shlib-versions.v.i: \
$(wildcard $(+sysdep_dirs:=/shlib-versions) \
$(subdir-srcdirs:=/shlib-versions)) \
$(..)shlib-versions
-soversions-default-setname = $(patsubst %, %,\
- $(filter-out %_default,\
- $(oldest-abi:%=GLIBC_%)))
$(common-objpfx)soversions.i: $(..)scripts/soversions.awk \
$(common-objpfx)shlib-versions.v
- $(AWK) -v default_setname='$(soversions-default-setname)' \
- -v cpu='$(config-machine)' \
- -v vendor='$(config-vendor)' \
- -v os='$(config-os)' \
- -f $^ > $@T
+ $(AWK) -f $^ > $@T
mv -f $@T $@
$(common-objpfx)soversions.mk: $(common-objpfx)soversions.i $(..)Makeconfig
(while read which lib number setname; do \
eval seen_$$which=1; \
- test x"$$which" != xABI || echo abi-name = "$$lib"; \
test x"$$which" = xDEFAULT || continue; \
case $$number in \
[0-9]*) echo "$$lib.so-version=.$$number"; \
echo "all-sonames+=$$lib=$$lib.so\$$($$lib.so-version)";;\
- *) echo "$$lib.so-version=\$$(if \$$(abi-$(default-abi)-$$lib-soname),\$$(abi-$(default-abi)-$$lib-soname),$$number)"; \
+ *) echo "$$lib.so-version=$$number"; \
echo "all-sonames+=$$lib=\$$($$lib.so-version)";;\
esac; \
done; \
postclean-generated += soversions.mk soversions.i \
shlib-versions.v shlib-versions.v.i
-# Generate the header containing the names of all shared libraries.
-# We use a stamp file to avoid unnecessary recompilations.
-before-compile += $(common-objpfx)gnu/lib-names.h
+before-compile += $(common-objpfx)libc-modules.h
+common-generated += libc-modules.h libc-modules.stmp
ifeq ($(soversions.mk-done),t)
-$(common-objpfx)gnu/lib-names.h: $(common-objpfx)gnu/lib-names.stmp; @:
-$(common-objpfx)gnu/lib-names.stmp: $(..)scripts/lib-names.awk \
- $(common-objpfx)soversions.i
- $(make-target-directory)
- { \
- echo '/* This file is automatically generated.';\
- echo ' It defines macros to allow user program to find the shared'; \
- echo ' library files which come as part of GNU libc. */'; \
- echo '#ifndef __GNU_LIB_NAMES_H'; \
- echo '#define __GNU_LIB_NAMES_H 1'; \
- echo ''; \
- $(if $(abi-includes), \
- $(foreach h,$(abi-includes), echo '#include <$(h)>';) \
- echo '';) \
- $(if $(abi-variants), \
- $(foreach v,$(abi-variants),\
- $(if $(abi-$(v)-condition),\
- echo '#if $(abi-$(v)-condition)'; \
- ($(foreach s,$(all-sonames), \
- $(if $(abi-$(v)-$(firstword $(subst =, ,$(s)))-soname),\
- echo $(firstword $(subst =, ,$(s)))=$(abi-$(v)-$(firstword $(subst =, ,$(s)))-soname);, \
- echo $(s);))) \
- | LC_ALL=C $(AWK) -v multi=1 -f $(firstword $^) | LC_ALL=C sort;) \
- $(if $(abi-$(v)-condition),echo '#endif';)), \
- ($(foreach s,$(all-sonames), echo $(s);)) \
- | LC_ALL=C $(AWK) -f $(firstword $^) | LC_ALL=C sort;) \
- echo ''; \
- echo '#endif /* gnu/lib-names.h */'; \
- } > ${@:stmp=T}
+# Generate a header with macro definitions for use with the IS_IN macro.
+# These are the possible values for the MODULE_NAME macro defined when building
+# sources, to identify which module the translation unit is going to be built
+# into.
+$(common-objpfx)libc-modules.h: $(common-objpfx)libc-modules.stmp; @:
+$(common-objpfx)libc-modules.stmp: $(..)scripts/gen-libc-modules.awk \
+ $(common-objpfx)soversions.i
+ $(AWK) -v buildlist="$(subst -,_,$(built-modules))" -f $^ > ${@:stmp=T}
$(move-if-change) ${@:stmp=T} ${@:stmp=h}
touch $@
+
endif
-common-generated += gnu/lib-names.h gnu/lib-names.stmp
+# Build the tunables list header early since it could be used by any module in
+# glibc.
+ifneq (no,$(have-tunables))
+before-compile += $(common-objpfx)dl-tunable-list.h
+common-generated += dl-tunable-list.h dl-tunable-list.stmp
+
+$(common-objpfx)dl-tunable-list.h: $(common-objpfx)dl-tunable-list.stmp; @:
+$(common-objpfx)dl-tunable-list.stmp: \
+ $(..)scripts/gen-tunables.awk \
+ $(..)elf/dl-tunables.list \
+ $(wildcard $(subdirs:%=$(..)%/dl-tunables.list)) \
+ $(wildcard $(sysdirs:%=%/dl-tunables.list))
+ $(AWK) -f $^ > ${@:stmp=T}
+ $(move-if-change) ${@:stmp=T} ${@:stmp=h}
+ touch $@
+endif
# The name under which the run-time dynamic linker is installed.
# We are currently going for the convention that `/lib/ld.so.1'
ifeq ($(build-shared),yes)
libm = $(common-objpfx)math/libm.so$(libm.so-version)
+libmvec = $(common-objpfx)mathvec/libmvec.so$(libmvec.so-version)
else
libm = $(common-objpfx)math/libm.a
+libmvec = $(common-objpfx)mathvec/libmvec.a
+endif
+
+ifeq ($(build-shared),yes)
+libsupport = $(common-objpfx)support/libsupport_nonshared.a
+else
+libsupport = $(common-objpfx)support/libsupport.a
endif
# These are the subdirectories containing the library source. The order
stdlib stdio-common libio malloc string wcsmbs time dirent \
grp pwd posix io termios resource misc socket sysvipc gmon \
gnulib iconv iconvdata wctype manual shadow gshadow po argp \
- crypt localedata timezone rt conform debug \
- $(add-on-subdirs) dlfcn elf
+ crypt localedata timezone rt conform debug mathvec support \
+ dlfcn elf
ifndef avoid-generated
# sysd-sorted itself will contain rules making the sysd-sorted target