-RELEASEDVERSION = -- will be replaced by "make dist" --
-VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags || echo $(RELEASEDVERSION))
-GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags); echo -$${v\#*-}; } )
+-include dracut-version.sh
+
+DRACUT_MAIN_VERSION ?= $(shell env GIT_CEILING_DIRECTORIES=$(CWD)/.. git describe --abbrev=0 --tags --always 2>/dev/null || :)
+ifeq ($(DRACUT_MAIN_VERSION),)
+DRACUT_MAIN_VERSION = $(DRACUT_VERSION)
+endif
+DRACUT_FULL_VERSION ?= $(shell env GIT_CEILING_DIRECTORIES=$(CWD)/.. git describe --tags --always 2>/dev/null || :)
+ifeq ($(DRACUT_FULL_VERSION),)
+DRACUT_FULL_VERSION = $(DRACUT_VERSION)
+endif
+
+HAVE_SHELLCHECK ?= $(shell which shellcheck >/dev/null 2>&1 && echo yes)
+HAVE_SHFMT ?= $(shell which shfmt >/dev/null 2>&1 && echo yes)
+HAVE_RPMBUILD ?= $(shell which rpmbuild >/dev/null 2>&1 && echo yes)
-include Makefile.inc
+KVERSION ?= $(shell uname -r)
+
prefix ?= /usr
libdir ?= ${prefix}/lib
datadir ?= ${prefix}/share
sysconfdir ?= ${prefix}/etc
bindir ?= ${prefix}/bin
mandir ?= ${prefix}/share/man
-CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64
+CFLAGS ?= -O2 -g -Wall -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
-man1pages = lsinitrd.1
+man1pages = man/lsinitrd.1
-man5pages = dracut.conf.5
+man5pages = man/dracut.conf.5
-man7pages = dracut.cmdline.7 \
- dracut.bootup.7
+man7pages = man/dracut.cmdline.7 \
+ man/dracut.bootup.7 \
+ man/dracut.modules.7
-man8pages = dracut.8 \
- dracut-catimages.8 \
- mkinitrd.8 \
- modules.d/98systemd/dracut-cmdline.service.8 \
- modules.d/98systemd/dracut-initqueue.service.8 \
- modules.d/98systemd/dracut-mount.service.8 \
- modules.d/98systemd/dracut-pre-mount.service.8 \
- modules.d/98systemd/dracut-pre-pivot.service.8 \
- modules.d/98systemd/dracut-pre-trigger.service.8 \
- modules.d/98systemd/dracut-pre-udev.service.8
+man8pages = man/dracut.8 \
+ man/dracut-catimages.8 \
+ modules.d/98dracut-systemd/dracut-cmdline.service.8 \
+ modules.d/98dracut-systemd/dracut-initqueue.service.8 \
+ modules.d/98dracut-systemd/dracut-mount.service.8 \
+ modules.d/98dracut-systemd/dracut-shutdown.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-udev.service.8
manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
+.PHONY: install clean archive rpm srpm testimage test all check AUTHORS CONTRIBUTORS doc dracut-version.sh
-.PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
+all: dracut-version.sh dracut.pc dracut-install src/skipcpio/skipcpio dracut-util
-all: dracut-version.sh dracut-install
+%.o : %.c
+ $(CC) -c $(CFLAGS) $(CPPFLAGS) $(KMOD_CFLAGS) $< -o $@
DRACUT_INSTALL_OBJECTS = \
install/dracut-install.o \
install/hashmap.o\
install/log.o \
+ install/strv.o \
install/util.o
# deps generated with gcc -MM
install/hashmap.h
install/log.o: install/log.c install/log.h install/macro.h install/util.h
install/util.o: install/util.c install/util.h install/macro.h install/log.h
+install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
+ $(CC) $(LDFLAGS) -o $@ $(DRACUT_INSTALL_OBJECTS) $(LDLIBS) $(FTS_LIBS) $(KMOD_LIBS)
+
+logtee: src/logtee/logtee.c
+ $(CC) $(LDFLAGS) -o $@ $<
dracut-install: install/dracut-install
ln -fs $< $@
-indent:
- indent -i8 -nut -br -linux -l120 install/dracut-install.c
+SKIPCPIO_OBJECTS = src/skipcpio/skipcpio.o
+skipcpio/skipcpio.o: src/skipcpio/skipcpio.c
+skipcpio/skipcpio: $(SKIPCPIO_OBJECTS)
+
+UTIL_OBJECTS = src/util/util.o
+util/util.o: src/util/util.c
+util/util: $(UTIL_OBJECTS)
+
+dracut-util: src/util/util
+ cp -a $< $@
+
+.PHONY: indent-c
+indent-c:
+ astyle -n --quiet --options=.astylerc $(wildcard *.[ch] */*.[ch] src/*/*.[ch])
+
+.PHONY: indent
+indent: indent-c
+ifeq ($(HAVE_SHFMT),yes)
+ shfmt -w -s .
+endif
doc: $(manpages) dracut.html
endif
%: %.xml
- xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+ @rm -f -- "$@"
+ xsltproc -o "$@" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
%.xml: %.asc
- asciidoc -d manpage -b docbook -o $@ $<
-
-dracut.html: dracut.asc $(manpages)
- asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
+ @rm -f -- "$@"
+ asciidoc -a "version=$(DRACUT_FULL_VERSION)" -d manpage -b docbook -o "$@" $<
+
+dracut.8: man/dracut.8.asc \
+ man/dracut.usage.asc
+
+dracut.html: man/dracut.asc $(manpages) dracut.css man/dracut.usage.asc
+ @rm -f -- dracut.xml
+ asciidoc -a "mainversion=$(DRACUT_MAIN_VERSION)" \
+ -a "version=$(DRACUT_FULL_VERSION)" \
+ -a numbered \
+ -d book -b docbook -o dracut.xml man/dracut.asc
+ @rm -f -- dracut.html
xsltproc -o dracut.html --xinclude -nonet \
- --stringparam html.stylesheet \
- http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
+ --stringparam custom.css.source dracut.css \
+ --stringparam generate.css.header 1 \
http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
- rm dracut.xml
+ @rm -f -- dracut.xml
+
+dracut.pc: Makefile.inc Makefile
+ @echo "Name: dracut" > dracut.pc
+ @echo "Description: dracut" >> dracut.pc
+ @echo "Version: $(DRACUT_FULL_VERSION)" >> dracut.pc
+ @echo "dracutdir=$(pkglibdir)" >> dracut.pc
+ @echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+ @echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
-install: dracut-version.sh
+install: all
mkdir -p $(DESTDIR)$(pkglibdir)
mkdir -p $(DESTDIR)$(bindir)
mkdir -p $(DESTDIR)$(sysconfdir)
mkdir -p $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(mandir)/man5 $(DESTDIR)$(mandir)/man7 $(DESTDIR)$(mandir)/man8
install -m 0755 dracut.sh $(DESTDIR)$(bindir)/dracut
install -m 0755 dracut-catimages.sh $(DESTDIR)$(bindir)/dracut-catimages
- install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(bindir)/mkinitrd
install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd
install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
+ install -m 0755 dracut-init.sh $(DESTDIR)$(pkglibdir)/dracut-init.sh
install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
endif
if [ -n "$(systemdsystemunitdir)" ]; then \
mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
- ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
- mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+ ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+ mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
ln -s ../dracut-shutdown.service \
- $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+ $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
for i in \
dracut-cmdline.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do \
- ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+ ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
ln -s ../$$i \
$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
done \
if [ -f install/dracut-install ]; then \
install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
fi
+ if [ -f src/skipcpio/skipcpio ]; then \
+ install -m 0755 src/skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
+ fi
+ if [ -f dracut-util ]; then \
+ install -m 0755 dracut-util $(DESTDIR)$(pkglibdir)/dracut-util; \
+ fi
mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
- install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
- install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
+ install -m 0755 install.d/50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
+ install -m 0755 install.d/51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
mkdir -p $(DESTDIR)${bashcompletiondir}
- install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
- install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+ install -m 0644 shell-completion/bash/dracut $(DESTDIR)${bashcompletiondir}/dracut
+ install -m 0644 shell-completion/bash/lsinitrd $(DESTDIR)${bashcompletiondir}/lsinitrd
+ mkdir -p $(DESTDIR)${pkgconfigdatadir}
+ install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
dracut-version.sh:
- @echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
+ @rm -f dracut-version.sh
+ @printf "#!/bin/sh\n# shellcheck disable=SC2034\nDRACUT_VERSION=%s\n" "$(DRACUT_FULL_VERSION)" > dracut-version.sh
clean:
$(RM) *~
$(RM) */*/*~
$(RM) $(manpages:%=%.xml) dracut.xml
$(RM) test-*.img
- $(RM) dracut-*.rpm dracut-*.tar.bz2
+ $(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
$(RM) dracut-version.sh
$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
+ $(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
+ $(RM) dracut-util util/util $(UTIL_OBJECTS)
$(RM) $(manpages) dracut.html
+ $(RM) dracut.pc
$(MAKE) -C test clean
-dist: dracut-$(VERSION).tar.bz2
-
-dracut-$(VERSION).tar.bz2: doc
- git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
- mkdir -p dracut-$(VERSION)
- cp $(manpages) dracut.html dracut-$(VERSION)
- git show $(VERSION):Makefile | sed 's/^RELEASEDVERSION =.*/RELEASEDVERSION = $(VERSION)/' > dracut-$(VERSION)/Makefile
- tar --owner=root --group=root -rf dracut-$(VERSION).tar dracut-$(VERSION)/*.[0-9] dracut-$(VERSION)/dracut.html dracut-$(VERSION)/Makefile
- rm -fr dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
- bzip2 -9 dracut-$(VERSION).tar
- rm -f dracut-$(VERSION).tar
+dist: dracut-$(DRACUT_MAIN_VERSION).tar.xz
+
+dracut-$(DRACUT_MAIN_VERSION).tar.xz: doc syncheck
+ @echo "DRACUT_VERSION=$(DRACUT_MAIN_VERSION)" > dracut-version.sh
+ git archive --format=tar $(DRACUT_MAIN_VERSION) --prefix=dracut-$(DRACUT_MAIN_VERSION)/ > dracut-$(DRACUT_MAIN_VERSION).tar
+ mkdir -p dracut-$(DRACUT_MAIN_VERSION)
+ for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(DRACUT_MAIN_VERSION)/$${i%/*}"; cp "$$i" "dracut-$(DRACUT_MAIN_VERSION)/$$i"; done
+ tar --owner=root --group=root -rf dracut-$(DRACUT_MAIN_VERSION).tar $$(find dracut-$(DRACUT_MAIN_VERSION) -type f)
+ rm -fr -- dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut-$(DRACUT_MAIN_VERSION)
+ xz -9 dracut-$(DRACUT_MAIN_VERSION).tar
+ rm -f -- dracut-$(DRACUT_MAIN_VERSION).tar
+
+ifeq ($(HAVE_RPMBUILD),yes)
+rpm: dracut-$(DRACUT_MAIN_VERSION).tar.xz syncheck
+ rpmbuild=$$(mktemp -d -p /var/tmp rpmbuild-dracut.XXXXXX); src=$$(pwd); \
+ cp dracut-$(DRACUT_MAIN_VERSION).tar.xz "$$rpmbuild"; \
+ LC_MESSAGES=C $$src/tools/git2spec.pl $(DRACUT_MAIN_VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+ (cd "$$rpmbuild"; \
+ wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+ rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+ --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
+ --define "_rpmdir $$PWD" -ba dracut.spec; ) && \
+ ( mv "$$rpmbuild"/{,$$(uname -m)/}*.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
-rpm: dracut-$(VERSION).tar.bz2
+srpm: dracut-$(DRACUT_MAIN_VERSION).tar.xz syncheck
rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
- cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
- LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
- (cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+ cp dracut-$(DRACUT_MAIN_VERSION).tar.xz "$$rpmbuild"; \
+ LC_MESSAGES=C $$src/tools/git2spec.pl $(DRACUT_MAIN_VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+ (cd "$$rpmbuild"; \
+ [ -f $$src/lgpl-2.1.txt ] && cp $$src/lgpl-2.1.txt . || wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+ rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
--define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
- --define "_rpmdir $$PWD" -ba dracut.spec; ) && \
- ( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
+ --define "_rpmdir $$PWD" -bs dracut.spec; ) && \
+ ( mv "$$rpmbuild"/*.src.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
+else
+.PHONY: rpm srpm
+rpm: syncheck
+srpm: syncheck
+endif
syncheck:
@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
[ "$${i##*/}" = "module-setup.sh" ] && continue; \
read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
- [ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
+ [ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi; \
+ [ $$V ] && echo "checking for echo -n: $$i"; if grep -Fq 'echo -n ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains echo -n"; fi \
done;exit $$ret
- @ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
- modules.d/*/module-setup.sh; do \
+ @ret=0;for i in *.sh modules.d/*/*.sh modules.d/*/module-setup.sh; do \
[ $$V ] && echo "bash syntax check: $$i"; bash -n "$$i" ; ret=$$(($$ret+$$?)); \
done;exit $$ret
+ifeq ($(HAVE_SHELLCHECK),yes)
+ifeq ($(HAVE_SHFMT),yes)
+ shellcheck $$(shfmt -f .)
+else
+ find . -name '*.sh' -print0 | xargs -0 shellcheck
+endif
+endif
check: all syncheck rpm
@[ "$$EUID" == "0" ] || { echo "'check' must be run as root! Please use 'sudo'."; exit 1; }
@$(MAKE) -C test check
testimage: all
- ./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
- @echo wrote test-$(shell uname -r).img
+ ./dracut.sh -N -l -a debug -f test-$(KVERSION).img $(KVERSION)
+ @echo wrote test-$(KVERSION).img
+
+debugtestimage: all
+ ./dracut.sh --debug -l -a debug -f test-$(KVERSION).img $(KVERSION)
+ @echo wrote test-$(KVERSION).img
testimages: all
- ./dracut.sh -l -a debug --kernel-only -f test-kernel-$(shell uname -r).img $(shell uname -r)
- @echo wrote test-$(shell uname -r).img
- ./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
+ ./dracut.sh -l -a debug --kernel-only -f test-kernel-$(KVERSION).img $(KVERSION)
+ @echo wrote test-$(KVERSION).img
+ ./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(KVERSION)
@echo wrote test-dracut.img
+debughostimage: all
+ ./dracut.sh --debug -H -l -f test-$(KVERSION).img $(KVERSION)
+ @echo wrote test-$(KVERSION).img
+
hostimage: all
- ./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
- @echo wrote test-$(shell uname -r).img
+ ./dracut.sh -H -l -f test-$(KVERSION).img $(KVERSION)
+ @echo wrote test-$(KVERSION).img
+
+efi: all
+ ./dracut.sh --uefi -H -l -f linux-$(KVERSION).efi $(KVERSION)
+ @echo wrote linux-$(KVERSION).efi
AUTHORS:
- git shortlog --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+ git shortlog --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
+
+CONTRIBUTORS:
+ @git shortlog $(DRACUT_MAIN_VERSION).. --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo "- $$rest";done
-dracut.html.sign: dracut-$(VERSION).tar.bz2
- gpg-sign-all dracut-$(VERSION).tar.bz2 dracut.html
+dracut.html.sign: dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut.html
+ gpg-sign-all dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut.html
upload: dracut.html.sign
- kup put dracut-$(VERSION).tar.bz2 dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+ kup put dracut-$(DRACUT_MAIN_VERSION).tar.xz dracut-$(DRACUT_MAIN_VERSION).tar.sign /pub/linux/utils/boot/dracut/
kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/
projects / thirdparty / dracut.git / blobdiff