#define REQ_ADD_SERVER3 60
#define REQ_ADD_PEER3 61
#define REQ_SHUTDOWN 62
-#define N_REQUEST_TYPES 63
+#define REQ_ONOFFLINE 63
+#define REQ_ADD_SOURCE 64
+#define REQ_NTP_SOURCE_NAME 65
+#define REQ_RESET_SOURCES 66
+#define REQ_AUTH_DATA 67
+#define REQ_CLIENT_ACCESSES_BY_INDEX3 68
+#define REQ_SELECT_DATA 69
+#define REQ_RELOAD_SOURCES 70
+#define REQ_DOFFSET2 71
+#define REQ_MODIFY_SELECTOPTS 72
+#define REQ_MODIFY_OFFSET 73
+#define REQ_LOCAL3 74
+#define N_REQUEST_TYPES 75
/* Structure used to exchange timespecs independent of time_t size */
typedef struct {
/* This is used in tv_sec_high for 32-bit timestamps */
#define TV_NOHIGHSEC 0x7fffffff
+/* Structure for 64-bit integers (not requiring 64-bit alignment) */
+typedef struct {
+ uint32_t high;
+ uint32_t low;
+} Integer64;
+
/* 32-bit floating-point format consisting of 7-bit signed exponent
and 25-bit signed coefficient without hidden bit.
The result is calculated as: 2^(exp - 25) * coef */
int32_t stratum;
Float distance;
int32_t orphan;
+ Float activate;
int32_t EOR;
} REQ_Local;
int32_t EOR;
} REQ_Ac_Check;
+/* Source types in NTP source requests */
+#define REQ_ADDSRC_SERVER 1
+#define REQ_ADDSRC_PEER 2
+#define REQ_ADDSRC_POOL 3
+
/* Flags used in NTP source requests */
#define REQ_ADDSRC_ONLINE 0x1
#define REQ_ADDSRC_AUTOOFFLINE 0x2
#define REQ_ADDSRC_REQUIRE 0x40
#define REQ_ADDSRC_INTERLEAVED 0x80
#define REQ_ADDSRC_BURST 0x100
+#define REQ_ADDSRC_NTS 0x200
+#define REQ_ADDSRC_COPY 0x400
+#define REQ_ADDSRC_EF_EXP_MONO_ROOT 0x800
+#define REQ_ADDSRC_EF_EXP_NET_CORRECTION 0x1000
+#define REQ_ADDSRC_IPV4 0x2000
+#define REQ_ADDSRC_IPV6 0x4000
typedef struct {
- IPAddr ip_addr;
+ uint32_t type;
+ uint8_t name[256];
uint32_t port;
int32_t minpoll;
int32_t maxpoll;
int32_t min_samples;
int32_t max_samples;
uint32_t authkey;
+ uint32_t nts_port;
Float max_delay;
Float max_delay_ratio;
Float max_delay_dev_ratio;
Float asymmetry;
Float offset;
uint32_t flags;
- uint32_t reserved[4];
+ int32_t filter_length;
+ uint32_t cert_set;
+ Float max_delay_quant;
+ uint32_t reserved[1];
int32_t EOR;
} REQ_NTP_Source;
} REQ_Dfreq;
typedef struct {
- int32_t sec;
- int32_t usec;
+ Float doffset;
int32_t EOR;
} REQ_Doffset;
typedef struct {
uint32_t first_index;
uint32_t n_clients;
+ uint32_t min_hits;
+ uint32_t reset;
int32_t EOR;
} REQ_ClientAccessesByIndex;
int32_t EOR;
} REQ_NTPData;
+typedef struct {
+ IPAddr ip_addr;
+ int32_t EOR;
+} REQ_NTPSourceName;
+
+typedef struct {
+ IPAddr ip_addr;
+ int32_t EOR;
+} REQ_AuthData;
+
+typedef struct {
+ uint32_t index;
+ int32_t EOR;
+} REQ_SelectData;
+
+/* Mask and options reuse the REQ_ADDSRC flags */
+typedef struct {
+ IPAddr address;
+ uint32_t ref_id;
+ uint32_t mask;
+ uint32_t options;
+ int32_t EOR;
+} REQ_Modify_SelectOpts;
+
+typedef struct {
+ IPAddr address;
+ uint32_t ref_id;
+ Float new_offset;
+ int32_t EOR;
+} REQ_Modify_Offset;
+
/* ================================================== */
#define PKT_TYPE_CMD_REQUEST 1
domain socket.
Version 6 (no authentication) : changed format of client accesses by index
- (using new request/reply types) and manual timestamp, new fields and flags
- in NTP source request and report, new commands: ntpdata, refresh,
- serverstats
+ (two times), delta offset, and manual timestamp, added new fields and
+ flags to NTP source request and report, made length of manual list constant,
+ added new commands: authdata, ntpdata, onoffline, refresh, reset,
+ selectdata, serverstats, shutdown, sourcename
*/
#define PROTO_VERSION_NUMBER 6
#define PROTO_VERSION_PADDING 6
/* The maximum length of padding in request packet, currently
- defined by MANUAL_LIST */
-#define MAX_PADDING_LENGTH 396
+ defined by CLIENT_ACCESSES_BY_INDEX3 */
+#define MAX_PADDING_LENGTH 484
/* ================================================== */
REQ_ReselectDistance reselect_distance;
REQ_SmoothTime smoothtime;
REQ_NTPData ntp_data;
+ REQ_NTPSourceName ntp_source_name;
+ REQ_AuthData auth_data;
+ REQ_SelectData select_data;
+ REQ_Modify_SelectOpts modify_select_opts;
+ REQ_Modify_Offset modify_offset;
} data; /* Command specific parameters */
/* Padding used to prevent traffic amplification. It only defines the
#define RPY_NTP_DATA 16
#define RPY_MANUAL_TIMESTAMP2 17
#define RPY_MANUAL_LIST2 18
-#define N_REPLY_TYPES 19
+#define RPY_NTP_SOURCE_NAME 19
+#define RPY_AUTH_DATA 20
+#define RPY_CLIENT_ACCESSES_BY_INDEX3 21
+#define RPY_SERVER_STATS2 22
+#define RPY_SELECT_DATA 23
+#define RPY_SERVER_STATS3 24
+#define RPY_SERVER_STATS4 25
+#define RPY_NTP_DATA2 26
+#define N_REPLY_TYPES 27
/* Status codes */
#define STT_SUCCESS 0
#define STT_BADSUBNET 7
#define STT_ACCESSALLOWED 8
#define STT_ACCESSDENIED 9
-/* Deprecated */
-#define STT_NOHOSTACCESS 10
+#define STT_NOHOSTACCESS 10 /* Deprecated */
#define STT_SOURCEALREADYKNOWN 11
#define STT_TOOMANYSOURCES 12
#define STT_NORTC 13
#define STT_INVALIDAF 17
#define STT_BADPKTVERSION 18
#define STT_BADPKTLENGTH 19
+#define STT_INVALIDNAME 21
typedef struct {
int32_t EOR;
#define RPY_SD_MD_PEER 1
#define RPY_SD_MD_REF 2
-#define RPY_SD_ST_SYNC 0
-#define RPY_SD_ST_UNREACH 1
+#define RPY_SD_ST_SELECTED 0
+#define RPY_SD_ST_NONSELECTABLE 1
#define RPY_SD_ST_FALSETICKER 2
#define RPY_SD_ST_JITTERY 3
-#define RPY_SD_ST_CANDIDATE 4
-#define RPY_SD_ST_OUTLIER 5
-
-#define RPY_SD_FLAG_NOSELECT 0x1
-#define RPY_SD_FLAG_PREFER 0x2
-#define RPY_SD_FLAG_TRUST 0x4
-#define RPY_SD_FLAG_REQUIRE 0x8
+#define RPY_SD_ST_UNSELECTED 4
+#define RPY_SD_ST_SELECTABLE 5
typedef struct {
IPAddr ip_addr;
typedef struct {
IPAddr ip;
uint32_t ntp_hits;
+ uint32_t nke_hits;
uint32_t cmd_hits;
uint32_t ntp_drops;
+ uint32_t nke_drops;
uint32_t cmd_drops;
int8_t ntp_interval;
+ int8_t nke_interval;
int8_t cmd_interval;
int8_t ntp_timeout_interval;
- int8_t pad;
uint32_t last_ntp_hit_ago;
+ uint32_t last_nke_hit_ago;
uint32_t last_cmd_hit_ago;
} RPY_ClientAccesses_Client;
} RPY_ClientAccessesByIndex;
typedef struct {
- uint32_t ntp_hits;
- uint32_t cmd_hits;
- uint32_t ntp_drops;
- uint32_t cmd_drops;
- uint32_t log_drops;
+ Integer64 ntp_hits;
+ Integer64 nke_hits;
+ Integer64 cmd_hits;
+ Integer64 ntp_drops;
+ Integer64 nke_drops;
+ Integer64 cmd_drops;
+ Integer64 log_drops;
+ Integer64 ntp_auth_hits;
+ Integer64 ntp_interleaved_hits;
+ Integer64 ntp_timestamps;
+ Integer64 ntp_span_seconds;
+ Integer64 ntp_daemon_rx_timestamps;
+ Integer64 ntp_daemon_tx_timestamps;
+ Integer64 ntp_kernel_rx_timestamps;
+ Integer64 ntp_kernel_tx_timestamps;
+ Integer64 ntp_hw_rx_timestamps;
+ Integer64 ntp_hw_tx_timestamps;
+ Integer64 reserved[4];
int32_t EOR;
} RPY_ServerStats;
uint32_t total_tx_count;
uint32_t total_rx_count;
uint32_t total_valid_count;
+ uint32_t total_good_count;
+ uint32_t total_kernel_tx_ts;
+ uint32_t total_kernel_rx_ts;
+ uint32_t total_hw_tx_ts;
+ uint32_t total_hw_rx_ts;
uint32_t reserved[4];
int32_t EOR;
} RPY_NTPData;
+typedef struct {
+ uint8_t name[256];
+ int32_t EOR;
+} RPY_NTPSourceName;
+
+#define RPY_AD_MD_NONE 0
+#define RPY_AD_MD_SYMMETRIC 1
+#define RPY_AD_MD_NTS 2
+
+typedef struct {
+ uint16_t mode;
+ uint16_t key_type;
+ uint32_t key_id;
+ uint16_t key_length;
+ uint16_t ke_attempts;
+ uint32_t last_ke_ago;
+ uint16_t cookies;
+ uint16_t cookie_length;
+ uint16_t nak;
+ uint16_t pad;
+ int32_t EOR;
+} RPY_AuthData;
+
+#define RPY_SD_OPTION_NOSELECT 0x1
+#define RPY_SD_OPTION_PREFER 0x2
+#define RPY_SD_OPTION_TRUST 0x4
+#define RPY_SD_OPTION_REQUIRE 0x8
+
+typedef struct {
+ uint32_t ref_id;
+ IPAddr ip_addr;
+ uint8_t state_char;
+ uint8_t authentication;
+ uint8_t leap;
+ uint8_t pad;
+ uint16_t conf_options;
+ uint16_t eff_options;
+ uint32_t last_sample_ago;
+ Float score;
+ Float lo_limit;
+ Float hi_limit;
+ int32_t EOR;
+} RPY_SelectData;
+
typedef struct {
uint8_t version;
uint8_t pkt_type;
RPY_Activity activity;
RPY_Smoothing smoothing;
RPY_NTPData ntp_data;
+ RPY_NTPSourceName ntp_source_name;
+ RPY_AuthData auth_data;
+ RPY_SelectData select_data;
} data; /* Reply specific parameters */
} CMD_Reply;
projects / thirdparty / chrony.git / blobdiff