DLLTOOL_FOR_TARGET
AS_FOR_TARGET
AR_FOR_TARGET
+GM2_FOR_TARGET
GDC_FOR_TARGET
GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
+RANLIB_PLUGIN_OPTION
+AR_PLUGIN_OPTION
+PKG_CONFIG_PATH
+GDCFLAGS
READELF
OTOOL
OBJDUMP
extra_host_zlib_configure_flags
extra_host_libiberty_configure_flags
stage1_languages
+host_libs_picflag
+PICFLAG
host_shared
+gcc_host_pie
+host_pie
extra_linker_plugin_flags
extra_linker_plugin_configure_flags
islinc
extra_mpfr_configure_flags
gmpinc
gmplibs
+PGO_BUILD_LTO_CFLAGS
+PGO_BUILD_USE_CFLAGS
+PGO_BUILD_GEN_CFLAGS
HAVE_CXX11_FOR_BUILD
HAVE_CXX11
do_compare
+GDC
GNATMAKE
GNATBIND
ac_ct_CXX
LDFLAGS
CFLAGS
CC
-extra_liboffloadmic_configure_flags
target_subdir
host_subdir
build_subdir
enable_option_checking
with_build_libsubdir
with_system_zlib
+with_zstd
enable_as_accelerator_for
enable_offload_targets
enable_offload_defaulted
enable_gold
enable_ld
+enable_gprofng
enable_compressed_debug_sections
+enable_default_compressed_debug_sections_algorithm
+enable_year2038
enable_libquadmath
enable_libquadmath_support
enable_libada
+enable_libgm2
enable_libssp
enable_libstdcxx
-enable_liboffloadmic
enable_bootstrap
+enable_pgo_build
with_mpc
with_mpc_include
with_mpc_lib
-with_mpfr_dir
with_mpfr
with_mpfr_include
with_mpfr_lib
-with_gmp_dir
with_gmp
with_gmp_include
with_gmp_lib
enable_lto
enable_linker_plugin_configure_flags
enable_linker_plugin_flags
+enable_host_pie
enable_host_shared
enable_stage1_languages
enable_objc_gc
GFORTRAN_FOR_TARGET
GOC_FOR_TARGET
GDC_FOR_TARGET
+GM2_FOR_TARGET
AR_FOR_TARGET
AS_FOR_TARGET
DLLTOOL_FOR_TARGET
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
--enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --enable-gprofng[=ARG] build gprofng [ARG={yes,no}]
--enable-compressed-debug-sections={all,gas,gold,ld,none}
Enable compressed debug sections for gas, gold or ld
by default
+ --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
+ Default compression algorithm for
+ --enable-compressed-debug-sections.
+ --enable-year2038 enable support for timestamps past the year 2038
--disable-libquadmath do not build libquadmath directory
--disable-libquadmath-support
disable libquadmath support for Fortran
--enable-libada build libada directory
+ --enable-libgm2 build libgm2 directory
--enable-libssp build libssp directory
--disable-libstdcxx do not build libstdc++-v3 directory
- --enable-liboffloadmic=ARG
- build liboffloadmic [ARG={no,host,target}]
--enable-bootstrap enable bootstrapping [yes if native build]
+ --enable-pgo-build[=lto]
+ enable the PGO build
--disable-isl-version-check
disable check for isl version
--enable-lto enable link time optimization support
--enable-linker-plugin-flags=FLAGS
additional flags for configuring and building linker
plugins [none]
+ --enable-host-pie build position independent host executables
--enable-host-shared build host code as shared libraries
--enable-stage1-languages[=all]
choose additional languages to build during stage1.
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
--with-system-zlib use installed libz
+ --with-zstd Support zstd compressed debug sections
+ (default=auto)
--with-mpc=PATH specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include plus
--with-mpc-lib=PATH/lib
--with-mpc-include=PATH specify directory for installed MPC include files
--with-mpc-lib=PATH specify directory for the installed MPC library
- --with-mpfr-dir=PATH this option has been REMOVED
--with-mpfr=PATH specify prefix directory for installed MPFR package.
Equivalent to --with-mpfr-include=PATH/include plus
--with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
specify directory for installed MPFR include files
--with-mpfr-lib=PATH specify directory for the installed MPFR library
- --with-gmp-dir=PATH this option has been REMOVED
--with-gmp=PATH specify prefix directory for the installed GMP
package. Equivalent to
--with-gmp-include=PATH/include plus
GOC for the target
GDC_FOR_TARGET
GDC for the target
+ GM2_FOR_TARGET
+ GM2 for the target
AR_FOR_TARGET
AR for the target
AS_FOR_TARGET
# these libraries are used by various programs built for the host environment
#f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libcody libdecnumber gmp mpfr mpc isl libelf libiconv libctf"
+host_libs="gettext libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libcody libdecnumber gmp mpfr mpc isl libiconv libctf libsframe libgrust "
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools c++tools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gm2tools gotools c++tools"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
target-libgloss \
target-newlib \
target-libgomp \
- target-liboffloadmic \
target-libatomic \
target-libitm \
target-libstdc++-v3 \
target-libffi \
target-libobjc \
target-libada \
+ target-libgm2 \
target-libgo \
+ target-libgrust \
target-libphobos \
target-zlib"
noconfigdirs="$noconfigdirs zlib"
fi
+# Don't compile the bundled readline/libreadline.a if --with-system-readline
+# is provided.
+if test x$with_system_readline = xyes ; then
+ noconfigdirs="$noconfigdirs readline"
+fi
+
+
+# Check whether --with-zstd was given.
+if test "${with_zstd+set}" = set; then :
+ withval=$with_zstd;
+fi
+
+
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto* | *-*-nacl*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl* | *-*-haiku*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
;;
esac
+# Check whether --enable-gprofng was given.
+if test "${enable_gprofng+set}" = set; then :
+ enableval=$enable_gprofng; enable_gprofng=$enableval
+else
+ enable_gprofng=yes
+fi
+
+if test "$enable_gprofng" = "yes"; then
+ case "${target}" in
+ x86_64-*-linux* | i?86-*-linux* | aarch64-*-linux*)
+ configdirs="$configdirs gprofng"
+ ;;
+ esac
+fi
+
+
# PR gas/19109
# Decide the default method for compressing debug sections.
# Provide a configure time option to override our default.
fi
+# Select default compression algorithm.
+# Check whether --enable-default_compressed_debug_sections_algorithm was given.
+if test "${enable_default_compressed_debug_sections_algorithm+set}" = set; then :
+ enableval=$enable_default_compressed_debug_sections_algorithm;
+else
+ default_compressed_debug_sections_algorithm=
+fi
+
+
# Configure extra directories which are host specific
case "${host}" in
;;
esac
+# Default to --disable-year2038 until we can handle differences between
+# projects that use gnulib (which understands year 2038) and projects that
+# do not (like BFD).
+# Check whether --enable-year2038 was given.
+if test "${enable_year2038+set}" = set; then :
+ enableval=$enable_year2038; ENABLE_YEAR2038=$enableval
+else
+ ENABLE_YEAR2038=no
+fi
+
+enable_year2038=
+if test "${ENABLE_YEAR2038}" = "no" ; then
+ enable_year2038=no
+fi
# Check whether --enable-libquadmath was given.
if test "${enable_libquadmath+set}" = set; then :
noconfigdirs="$noconfigdirs gnattools"
fi
+# Check whether --enable-libgm2 was given.
+if test "${enable_libgm2+set}" = set; then :
+ enableval=$enable_libgm2; ENABLE_LIBGM2=$enableval
+else
+ ENABLE_LIBGM2=no
+fi
+
+if test "${ENABLE_LIBGM2}" != "yes" ; then
+ noconfigdirs="$noconfigdirs gm2tools"
+fi
+
# Check whether --enable-libssp was given.
if test "${enable_libssp+set}" = set; then :
enableval=$enable_libssp; ENABLE_LIBSSP=$enableval
noconfigdirs="$noconfigdirs target-libstdc++-v3"
fi
-# If this is accelerator compiler and its target is intelmic we enable
-# target liboffloadmic by default. If this is compiler with offloading
-# for intelmic we enable host liboffloadmic by default. Otherwise
-# liboffloadmic is disabled by default.
-# Check whether --enable-liboffloadmic was given.
-if test "${enable_liboffloadmic+set}" = set; then :
- enableval=$enable_liboffloadmic; case "$enableval" in
- no | host | target)
- enable_liboffloadmic=$enableval ;;
- *)
- as_fn_error $? "--enable-liboffloadmic=no/host/target" "$LINENO" 5 ;;
-esac
-else
- if test x"$enable_as_accelerator_for" != x; then
- case "${target}" in
- *-intelmic-* | *-intelmicemul-*)
- enable_liboffloadmic=target
- extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
- ;;
- *)
- enable_liboffloadmic=no
- ;;
- esac
-else
- case "${enable_offload_targets}" in
- *-intelmic-* | *-intelmicemul-*)
- enable_liboffloadmic=host
- extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
- ;;
- *)
- enable_liboffloadmic=no
- ;;
- esac
-fi
-fi
-
-
-
# Enable libgomp by default on hosted POSIX systems, and a few others.
if test x$enable_libgomp = x ; then
case "${target}" in
fi
fi
-# Disable liboffloadmic on unsupported systems.
-if test -d ${srcdir}/liboffloadmic; then
- if test x$enable_liboffloadmic != xno; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for liboffloadmic support" >&5
-$as_echo_n "checking for liboffloadmic support... " >&6; }
- if (srcdir=${srcdir}/liboffloadmic; \
- . ${srcdir}/configure.tgt; \
- test -n "$UNSUPPORTED")
- then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- noconfigdirs="$noconfigdirs target-liboffloadmic"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- fi
-fi
-
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
esac
# Disable libstdc++-v3 for some systems.
-# Allow user to override this if they pass --enable-libstdc++-v3
+# Allow user to override this if they pass --enable-libstdcxx
if test "${ENABLE_LIBSTDCXX}" = "default" ; then
case "${target}" in
*-*-vxworks*)
i[3456789]86-*-*)
libgloss_dir=i386
;;
+ loongarch*-*-*)
+ libgloss_dir=loongarch
+ ;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
libgloss_dir=m68hc11
;;
*-*-dragonfly*)
;;
*-*-freebsd*)
- if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
+ if test "x$with_gmp" = x \
&& ! test -d ${srcdir}/gmp \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
wasm32-*-*)
noconfigdirs="$noconfigdirs ld"
;;
+ loongarch*-*-linux*)
+ ;;
+ loongarch*-*-*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
alpha*-linux*)
host_makefile_frag="config/mh-alpha-linux"
;;
- hppa*-hp-hpux10*)
- host_makefile_frag="config/mh-pa-hpux10"
- ;;
hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CPP_FOR_BUILD="${CPP_FOR_BUILD-\$(CPP)}"
+ CPP_FOR_BUILD="${CPP_FOR_BUILD-\$(CC_FOR_BUILD) -E}"
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
DSYMUTIL_FOR_BUILD=${DSYMUTIL_FOR_BUILD-dsymutil}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GNATMAKE="$ac_cv_prog_GNATMAKE"
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether compiler driver understands Ada" >&5
-$as_echo_n "checking whether compiler driver understands Ada... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether compiler driver understands Ada and is recent enough" >&5
+$as_echo_n "checking whether compiler driver understands Ada and is recent enough... " >&6; }
if ${acx_cv_cc_gcc_supports_ada+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.adb <<EOF
+pragma Warnings (Off);
+with System.CRTL;
+pragma Warnings (On);
+use type System.CRTL.int64;
procedure conftest is begin null; end conftest;
EOF
acx_cv_cc_gcc_supports_ada=no
have_gnat=no
fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gdc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gdc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GDC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GDC"; then
+ ac_cv_prog_GDC="$GDC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GDC="${ac_tool_prefix}gdc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GDC=$ac_cv_prog_GDC
+if test -n "$GDC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC" >&5
+$as_echo "$GDC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GDC"; then
+ ac_ct_GDC=$GDC
+ # Extract the first word of "gdc", so it can be a program name with args.
+set dummy gdc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GDC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_GDC"; then
+ ac_cv_prog_ac_ct_GDC="$ac_ct_GDC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GDC="gdc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GDC=$ac_cv_prog_ac_ct_GDC
+if test -n "$ac_ct_GDC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GDC" >&5
+$as_echo "$ac_ct_GDC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_GDC" = x; then
+ GDC="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ GDC=$ac_ct_GDC
+ fi
+else
+ GDC="$ac_cv_prog_GDC"
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the D compiler works" >&5
+$as_echo_n "checking whether the D compiler works... " >&6; }
+if ${acx_cv_d_compiler_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.d <<EOF
+module conftest; int main() { return 0; }
+EOF
+acx_cv_d_compiler_works=no
+if test "x$GDC" != xno; then
+ errors=`(${GDC} -c conftest.d) 2>&1 || echo failure`
+ if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_d_compiler_works=yes
+ fi
+ rm -f conftest.*
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_d_compiler_works" >&5
+$as_echo "$acx_cv_d_compiler_works" >&6; }
+if test "x$GDC" != xno && test x$acx_cv_d_compiler_works != xno; then
+ have_gdc=yes
+else
+ have_gdc=no
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to compare bootstrapped objects" >&5
$as_echo_n "checking how to compare bootstrapped objects... " >&6; }
if ${gcc_cv_prog_cmp_skip+:} false; then :
fi
fi
+# Check whether --enable-pgo-build was given.
+if test "${enable_pgo_build+set}" = set; then :
+ enableval=$enable_pgo_build; enable_pgo_build=$enableval
+else
+ enable_pgo_build=no
+fi
+
+
+# Issue errors and warnings for invalid/strange PGO build combinations.
+case "$have_compiler:$host:$target:$enable_pgo_build" in
+ *:*:*:no) ;;
+
+ # Allow the PGO build only if we aren't building a compiler and
+ # we are in a native configuration.
+ no:$build:$build:yes | no:$build:$build:lto) ;;
+
+ # Disallow the PGO bootstrap if we are building a compiler.
+ yes:*:*:yes | yes:*:*:lto)
+ as_fn_error $? "cannot perform the PGO bootstrap when building a compiler" "$LINENO" 5 ;;
+
+ *)
+ as_fn_error $? "invalid option for --enable-pgo-build" "$LINENO" 5
+ ;;
+esac
+
+if test "$enable_pgo_build" != "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports -fprofile-generate" >&5
+$as_echo_n "checking whether the compiler supports -fprofile-generate... " >&6; }
+ old_CFLAGS="$CFLAGS"
+ PGO_BUILD_GEN_CFLAGS="-fprofile-generate"
+ CFLAGS="$CFLAGS $PGO_BUILD_CFLAGS"
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ PGO_BUILD_GEN_CFLAGS=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$old_CFLAGS"
+ if test -n "$PGO_BUILD_GEN_CFLAGS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ PGO_BUILD_USE_CFLAGS="-fprofile-use"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ as_fn_error $? "cannot perform the PGO build without -fprofile-generate" "$LINENO" 5
+ fi
+
+ if test "$enable_pgo_build" = "lto"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports -flto=jobserver -ffat-lto-objects" >&5
+$as_echo_n "checking whether the compiler supports -flto=jobserver -ffat-lto-objects... " >&6; }
+ old_CFLAGS="$CFLAGS"
+ PGO_BUILD_LTO_CFLAGS="-flto=jobserver -ffat-lto-objects"
+ CFLAGS="$CFLAGS $PGO_BUILD_LTO_CFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ PGO_BUILD_LTO_CFLAGS=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$old_CFLAGS"
+ if test -n "$PGO_BUILD_LTO_CFLAGS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: LTO is disabled for the PGO build" >&5
+$as_echo "$as_me: WARNING: LTO is disabled for the PGO build" >&2;}
+ fi
+ fi
+fi
+
+
+
+
# Used for setting $lt_cv_objdir
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
# Check for GMP, MPFR and MPC
-gmplibs="-lmpc -lmpfr -lgmp"
+require_gmp=no
+require_mpc=no
+if test -d ${srcdir}/gcc ; then
+ require_gmp=yes
+ require_mpc=yes
+fi
+if test -d ${srcdir}/gdb ; then
+ if test "x$enable_gdb" != xno; then
+ require_gmp=yes
+ fi
+fi
+
+gmplibs="-lmpfr -lgmp"
+if test x"$require_mpc" = "xyes" ; then
+ gmplibs="-lmpc $gmplibs"
+fi
gmpinc=
have_gmp=no
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
-# Check whether --with-mpfr-dir was given.
-if test "${with_mpfr_dir+set}" = set; then :
- withval=$with_mpfr_dir; as_fn_error $? "The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH" "$LINENO" 5
-fi
-
-
-
# Check whether --with-mpfr was given.
if test "${with_mpfr+set}" = set; then :
withval=$with_mpfr;
# Specify a location for gmp
-# Check whether --with-gmp-dir was given.
-if test "${with_gmp_dir+set}" = set; then :
- withval=$with_gmp_dir; as_fn_error $? "The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH" "$LINENO" 5
-fi
-
-
-
# Check whether --with-gmp was given.
if test "${with_gmp+set}" = set; then :
withval=$with_gmp;
have_gmp=yes
fi
-if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
+if test "x$require_gmp" = xyes && test "x$have_gmp" = xno; then
have_gmp=yes
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
# Check for the recommended and required versions of GMP.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of gmp.h" >&5
$as_echo_n "checking for the correct version of gmp.h... " >&6; }
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "gmp.h"
int
fi
# Check for the MPC header version.
- if test x"$have_gmp" = xyes ; then
+ if test "x$require_mpc" = xyes && test x"$have_gmp" = xyes ; then
# Check for the recommended and required versions of MPC.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of mpc.h" >&5
$as_echo_n "checking for the correct version of mpc.h... " >&6; }
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of the gmp/mpfr/mpc libraries" >&5
-$as_echo_n "checking for the correct version of the gmp/mpfr/mpc libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of the gmp/mpfr libraries" >&5
+$as_echo_n "checking for the correct version of the gmp/mpfr libraries... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include <mpc.h>
+#include <mpfr.h>
int
main ()
{
mpfr_t n;
mpfr_t x;
- mpc_t c;
int t;
mpfr_init (n);
mpfr_init (x);
mpfr_subnormalize (x, t, MPFR_RNDN);
mpfr_clear(n);
mpfr_clear(x);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }; have_gmp=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$saved_LIBS"
+ fi
+
+ # Now check the MPC library
+ if test "x$require_mpc" = xyes && test x"$have_gmp" = xyes; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of the mpc libraries" >&5
+$as_echo_n "checking for the correct version of the mpc libraries... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <mpc.h>
+int
+main ()
+{
+
+ mpc_t c;
mpc_init2 (c, 53);
mpc_set_ui_ui (c, 1, 1, MPC_RNDNN);
mpc_cosh (c, c, MPC_RNDNN);
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- as_fn_error $? "Building GCC requires GMP 4.2+, MPFR 3.1.0+ and MPC 0.8.0+.
+ if test -d ${srcdir}/gcc ; then
+ as_fn_error $? "Building GCC requires GMP 4.2+, MPFR 3.1.0+ and MPC 0.8.0+.
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
you obtained GMP, MPFR and/or MPC from a vendor distribution package,
make sure that you have installed both the libraries and the header
files. They may be located in separate packages." "$LINENO" 5
+ else
+ as_fn_error $? "Building GDB requires GMP 4.2+, and MPFR 3.1.0+.
+Try the --with-gmp and/or --with-mpfr options to specify
+their locations. If you obtained GMP and/or MPFR from a vendor
+distribution package, make sure that you have installed both the libraries
+and the header files. They may be located in separate packages." "$LINENO" 5
+ fi
fi
fi
fi
fi
+case $target in
+ *-darwin2* | *-darwin1[56789]*)
+ # For these versions, we default to using embedded rpaths.
+ if test "x$enable_darwin_at_rpath" != "xno"; then
+ poststage1_ldflags="$poststage1_ldflags -nodefaultrpaths"
+ fi
+ ;;
+ *-darwin*)
+ # For these versions, we only use embedded rpaths on demand.
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ poststage1_ldflags="$poststage1_ldflags -nodefaultrpaths"
+ fi
+ ;;
+esac
# GCC GRAPHITE dependency isl.
+# Handle --enable-host-pie
+# If host PIE executables are the default (or must be forced on) for some host,
+# we must pass that configuration to the gcc directory.
+gcc_host_pie=
+# Check whether --enable-host-pie was given.
+if test "${enable_host_pie+set}" = set; then :
+ enableval=$enable_host_pie; host_pie=$enableval
+ case $host in
+ *-*-darwin2*)
+ if test x$host_pie != xyes ; then
+ # for Darwin20+ this is required.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIE executables are required for the configured host, host-pie setting ignored." >&5
+$as_echo "$as_me: WARNING: PIE executables are required for the configured host, host-pie setting ignored." >&2;}
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ fi ;;
+ *) ;;
+ esac
+else
+ case $host in
+ *-*-darwin2*)
+ # Default to PIE (mandatory for aarch64).
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ ;;
+ *) host_pie=no ;;
+ esac
+fi
+
+
+
+
+
# Enable --enable-host-shared.
# Checked early to determine whether jit is an 'all' language
# Check whether --enable-host-shared was given.
if test "${enable_host_shared+set}" = set; then :
enableval=$enable_host_shared; host_shared=$enableval
+ case $host in
+ x86_64-*-darwin* | aarch64-*-darwin*)
+ if test x$host_shared != xyes ; then
+ # PIC is the default, and actually cannot be switched off.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIC code is required for the configured host; host-shared setting ignored." >&5
+$as_echo "$as_me: WARNING: PIC code is required for the configured host; host-shared setting ignored." >&2;}
+ host_shared=yes
+ fi ;;
+ *-*-darwin*)
+ if test x$host_pie = xyes -a x$host_shared != xyes ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIC code is required for PIE host executables host-shared setting ignored." >&5
+$as_echo "$as_me: WARNING: PIC code is required for PIE host executables host-shared setting ignored." >&2;}
+ host_shared=yes
+ fi ;;
+ *) ;;
+ esac
else
- host_shared=no
+ case $host in
+ # 64B x86_64 and Aarch64 Darwin default to PIC.
+ x86_64-*-darwin* | aarch64-*-darwin*) host_shared=yes ;;
+ # 32B and powerpc64 Darwin must use PIC to link PIE exes.
+ *-*-darwin*) host_shared=$host_pie ;;
+ *) host_shared=no;;
+ esac
fi
+
+if test x$host_shared = xyes; then
+ case $host in
+ *-*-darwin*)
+ # Since host shared is the default for 64b Darwin, and also enabled for
+ # host_pie, ensure that we present the PIE flag when host_pie is active.
+ if test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+ fi
+ ;;
+ *)
+ PICFLAG=-fPIC
+ ;;
+ esac
+elif test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+else
+ PICFLAG=
+fi
+
+
+
+# If we are building PIC/PIE host executables, and we are building dependent
+# libs (e.g. GMP) in-tree those libs need to be configured to generate PIC
+# code.
+host_libs_picflag=
+if test "$host_shared" = "yes" -o "$host_pie" = "yes"; then
+host_libs_picflag='--with-pic'
+fi
+
+
# By default, C and C++ are the only stage 1 languages.
stage1_languages=,c,
;;
esac
+ # Disable D if no preexisting GDC is available.
+ case ${add_this_lang}:${language}:${have_gdc} in
+ yes:d:no)
+ # Specifically requested language; tell them.
+ as_fn_error $? "GDC is required to build $language" "$LINENO" 5
+ ;;
+ all:d:no)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: GDC is required to build $language" >&5
+$as_echo "$as_me: WARNING: GDC is required to build $language" >&2;}
+ add_this_lang=unsupported
+ ;;
+ *:d:no)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+
# Disable jit if -enable-host-shared not specified
# but not if building for Mingw. All code in Windows
# is position independent code (PIC).
*) stage1_languages="${stage1_languages}${language}," ;;
esac
# We need to bootstrap any supporting libraries.
- bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
+ bootstrap_target_libs=`echo "${bootstrap_target_libs}${target_libs}," | sed "s/ /,/g"`
;;
esac
;;
fi
esac
-# Disable libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
+# Disable libitm, libsanitizer, libvtv if we're not building C++
case ,${enable_languages}, in
*,c++,*)
# Disable libitm, libsanitizer if we're not building libstdc++
esac
;;
*)
- noconfigdirs="$noconfigdirs target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
+ noconfigdirs="$noconfigdirs target-libitm target-libsanitizer target-libvtv"
+ ;;
+esac
+
+case ,${enable_languages}, in
+ *,rust,*)
+ case " ${noconfigdirs} " in
+ *\ target-libstdc++-v3\ *)
+ # Disable target libgrust if we're not building target libstdc++.
+ noconfigdirs="$noconfigdirs target-libgrust"
+ ;;
+ esac
;;
esac
# Sometimes we have special requirements for the host libiberty.
extra_host_libiberty_configure_flags=
-extra_host_zlib_configure_flags=
case " $configdirs " in
- *" lto-plugin "* | *" libcc1 "*)
+ *" lto-plugin "* | *" libcc1 "* | *" gdbserver "*)
# When these are to be built as shared libraries, the same applies to
# libiberty.
extra_host_libiberty_configure_flags=--enable-shared
;;
+esac
+
+
+# Sometimes we have special requirements for the host zlib.
+extra_host_zlib_configure_flags=
+case " $configdirs " in
*" bfd "*)
# When bfd is to be built as a shared library, the same applies to
# zlib.
esac
-
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
+ loongarch*-*linux* | loongarch*-*gnu*)
+ target_makefile_frag="config/mt-loongarch-gnu"
+ ;;
+ loongarch*-*elf*)
+ target_makefile_frag="config/mt-loongarch-elf"
+ ;;
mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
target_makefile_frag="config/mt-sde"
;;
bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
fi
+# If we are building libatomic and the list of enabled languages includes the
+# D frontend, bootstrap it.
+if echo " ${target_configdirs} " | grep " libatomic " > /dev/null 2>&1; then
+ case ,${enable_languages}, in
+ *,d,*)
+ bootstrap_target_libs=${bootstrap_target_libs}target-libatomic,
+ ;;
+ esac
+fi
+
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
/^@unless /d
/^@endunless /d"
+if test "$enable_pgo_build" != "no"; then
+ extrasub_build="$extrasub_build
+/^@if pgo-build\$/d
+/^@endif pgo-build\$/d"
+fi
+
# Create the serialization dependencies. This uses a temporary file.
# Check whether --enable-serial-configure was given.
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
+if test "x${enable_serial_build_configure}" = xyes || test "x${enable_serial_host_configure}" = xyes || test "x${enable_serial_target_configure}" = xyes; then
echo '# serdep.tmp' > serdep.tmp
+fi
olditem=
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
# files altogether, and which should be passed on to subconfigures.
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
-baseargs=
+hbaseargs=
+bbaseargs=
tbaseargs=
keep_next=no
skip_next=no
*\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
- baseargs="$baseargs '$ac_arg'"
+ hbaseargs="$hbaseargs '$ac_arg'"
+ bbaseargs="$bbaseargs '$ac_arg'"
tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
esac
skip_targ=no
+ skip_barg=no
case $ac_arg in
--with-* | --without-*)
*[-_]lib)
lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
;;
+ *[-_]prefix)
+ lib=`echo "$libopt" | sed 's,[-_]prefix$,,'`
+ ;;
+ *[-_]type)
+ lib=`echo "$libopt" | sed 's,[-_]type$,,'`
+ ;;
*)
lib=$libopt
;;
skip_targ=yes
fi
;;
+ libintl | libiconv)
+ # We don't want libintl (and co.) in anything but the host arguments.
+ skip_targ=yes
+ skip_barg=yes
+ ;;
esac
;;
esac
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
- baseargs="$baseargs '$ac_arg'"
+ hbaseargs="$hbaseargs '$ac_arg'"
+ bbaseargs="$bbaseargs '$ac_arg'"
tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
*\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
- baseargs="$baseargs '$ac_arg'"
+ hbaseargs="$hbaseargs '$ac_arg'"
+ if test X"$skip_barg" = Xno; then
+ bbaseargs="$bbaseargs '$ac_arg'"
+ fi
if test X"$skip_targ" = Xno; then
tbaseargs="$tbaseargs '$ac_arg'"
fi
done
# Remove the initial space we just introduced and, as these will be
# expanded by make, quote '$'.
-baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+hbaseargs=`echo "x$hbaseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+bbaseargs=`echo "x$bbaseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
# Add in --program-transform-name, after --program-prefix and
# --program-suffix have been applied to it. Autoconf has already
EOF_SED
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
-baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+hbaseargs="$hbaseargs --program-transform-name='${gcc_transform_name}'"
+bbaseargs="$bbaseargs --program-transform-name='${gcc_transform_name}'"
tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
- baseargs="$baseargs --silent"
+ bbaseargs="$bbaseargs --silent"
+ hbaseargs="$hbaseargs --silent"
tbaseargs="$tbaseargs --silent"
fi
-baseargs="$baseargs --disable-option-checking"
+
+bbaseargs="$bbaseargs --disable-option-checking"
+hbaseargs="$hbaseargs --disable-option-checking"
tbaseargs="$tbaseargs --disable-option-checking"
+if test "$enable_year2038" = no; then
+ baseargs="$baseargs --disable-year2038"
+ tbaseargs="$tbaseargs --disable-year2038"
+fi
+
# Record and document user additions to sub configure arguments.
# desired. We can't even use the same cache file for all build-side
# libraries, as they're compiled differently; some with C, some with
# C++ or with different feature-enabling options.
-build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
+build_configargs="$build_configargs --cache-file=./config.cache ${bbaseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
-host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
+host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${hbaseargs}"
target_configargs="$target_configargs ${tbaseargs}"
mep*)
FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
;;
+ # The VxWorks support for shared libraries is getting in
+ # incrementally. Make sure it doesn't get activated implicitly:
+ *vxworks*)
+ if test "${enable_shared-unset}" = unset ; then
+ enable_shared=no
+ # So the build of libraries knows ...
+ target_configargs="${target_configargs} --disable-shared"
+ # So gcc knows ...
+ host_configargs="${host_configargs} --disable-shared"
+ fi
+ ;;
esac
# Makefile fragments.
+
+
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
+
+GDCFLAGS=${GDCFLAGS-${CFLAGS}}
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -plugin option" >&5
+$as_echo_n "checking for -plugin option... " >&6; }
+
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+plugin_option=
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test "${AR}" = "" ; then
+ as_fn_error $? "Required archive tool 'ar' not found on PATH." "$LINENO" 5
+fi
+touch conftest.c
+${AR} $plugin_option rc conftest.a conftest.c
+if test "$?" != 0; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
+$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
+ plugin_option=
+fi
+rm -f conftest.*
+if test -n "$plugin_option"; then
+ PLUGIN_OPTION="$plugin_option"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $plugin_option" >&5
+$as_echo "$plugin_option" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+AR_PLUGIN_OPTION=
+RANLIB_PLUGIN_OPTION=
+if test -n "$PLUGIN_OPTION"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ AR_PLUGIN_OPTION="$PLUGIN_OPTION"
+ fi
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB_PLUGIN_OPTION="$PLUGIN_OPTION"
+ fi
+fi
+
+
+
# Target tools.
# Check whether --with-build-time-tools was given.
+if test -n "$GM2_FOR_TARGET"; then
+ ac_cv_prog_GM2_FOR_TARGET=$GM2_FOR_TARGET
+elif test -n "$ac_cv_prog_GM2_FOR_TARGET"; then
+ GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GM2_FOR_TARGET"; then
+ for ncn_progname in gm2; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GM2_FOR_TARGET+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GM2_FOR_TARGET"; then
+ ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GM2_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in gm2; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GM2_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET"; then
+ for ncn_progname in gm2; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GM2_FOR_TARGET+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GM2_FOR_TARGET"; then
+ ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GM2_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_GM2_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GM2_FOR_TARGET+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GM2_FOR_TARGET"; then
+ ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GM2_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_GM2_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET" ; then
+ set dummy gm2
+ if test $build = $target ; then
+ GM2_FOR_TARGET="$2"
+ else
+ GM2_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ GM2_FOR_TARGET="$ac_cv_prog_GM2_FOR_TARGET"
+fi
+
+
+
cat > conftest.c << \EOF
#ifdef __GNUC__
gcc_yay;
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gm2" >&5
+$as_echo_n "checking where to find the target gm2... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GM2_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GM2_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,m2,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GM2_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gm2 -B$$r/$(HOST_SUBDIR)/gcc/'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$GM2_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GM2_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GM2_FOR_TARGET='$(GM2)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ld" >&5
$as_echo_n "checking where to find the target ld... " >&6; }
if test "x${build}" != "x${host}" ; then
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2-compiler-boot/M2Version*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2-compiler-boot/SYSTEM*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2version*"
case "$target" in
hppa*64*-*-hpux*) ;;
- hppa*-*-hpux*) compare_exclusions="$compare_exclusions | */libgcc/lib2funcs* | gcc/function-tests.o" ;;
powerpc*-ibm-aix*) compare_exclusions="$compare_exclusions | *libgomp*\$(objext)" ;;
esac