GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
+RANLIB_PLUGIN_OPTION
+AR_PLUGIN_OPTION
+PKG_CONFIG_PATH
GDCFLAGS
READELF
OTOOL
extra_host_libiberty_configure_flags
stage1_languages
host_libs_picflag
+PICFLAG
host_shared
+gcc_host_pie
+host_pie
extra_linker_plugin_flags
extra_linker_plugin_configure_flags
islinc
enable_option_checking
with_build_libsubdir
with_system_zlib
+with_zstd
enable_as_accelerator_for
enable_offload_targets
enable_offload_defaulted
enable_gold
enable_ld
+enable_gprofng
enable_compressed_debug_sections
+enable_default_compressed_debug_sections_algorithm
+enable_year2038
enable_libquadmath
enable_libquadmath_support
enable_libada
enable_lto
enable_linker_plugin_configure_flags
enable_linker_plugin_flags
+enable_host_pie
enable_host_shared
enable_stage1_languages
enable_objc_gc
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
--enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --enable-gprofng[=ARG] build gprofng [ARG={yes,no}]
--enable-compressed-debug-sections={all,gas,gold,ld,none}
Enable compressed debug sections for gas, gold or ld
by default
+ --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
+ Default compression algorithm for
+ --enable-compressed-debug-sections.
+ --enable-year2038 enable support for timestamps past the year 2038
--disable-libquadmath do not build libquadmath directory
--disable-libquadmath-support
disable libquadmath support for Fortran
--enable-linker-plugin-flags=FLAGS
additional flags for configuring and building linker
plugins [none]
+ --enable-host-pie build position independent host executables
--enable-host-shared build host code as shared libraries
--enable-stage1-languages[=all]
choose additional languages to build during stage1.
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
--with-system-zlib use installed libz
+ --with-zstd Support zstd compressed debug sections
+ (default=auto)
--with-mpc=PATH specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include plus
--with-mpc-lib=PATH/lib
noconfigdirs="$noconfigdirs readline"
fi
+
+# Check whether --with-zstd was given.
+if test "${with_zstd+set}" = set; then :
+ withval=$with_zstd;
+fi
+
+
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto* | *-*-nacl*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl* | *-*-haiku*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
- | aarch64*-*-* | mips*-*-* | s390*-*-* | loongarch*-*-*)
+ | aarch64*-*-* | tilegx*-*-* | mips*-*-* | s390*-*-* | loongarch*-*-*)
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
;;
esac
+# Check whether --enable-gprofng was given.
+if test "${enable_gprofng+set}" = set; then :
+ enableval=$enable_gprofng; enable_gprofng=$enableval
+else
+ enable_gprofng=yes
+fi
+
+if test "$enable_gprofng" = "yes"; then
+ case "${target}" in
+ x86_64-*-linux* | i?86-*-linux* | aarch64-*-linux*)
+ configdirs="$configdirs gprofng"
+ ;;
+ esac
+fi
+
+
# PR gas/19109
# Decide the default method for compressing debug sections.
# Provide a configure time option to override our default.
fi
+# Select default compression algorithm.
+# Check whether --enable-default_compressed_debug_sections_algorithm was given.
+if test "${enable_default_compressed_debug_sections_algorithm+set}" = set; then :
+ enableval=$enable_default_compressed_debug_sections_algorithm;
+else
+ default_compressed_debug_sections_algorithm=
+fi
+
+
# Configure extra directories which are host specific
case "${host}" in
;;
esac
+# Default to --disable-year2038 until we can handle differences between
+# projects that use gnulib (which understands year 2038) and projects that
+# do not (like BFD).
+# Check whether --enable-year2038 was given.
+if test "${enable_year2038+set}" = set; then :
+ enableval=$enable_year2038; ENABLE_YEAR2038=$enableval
+else
+ ENABLE_YEAR2038=no
+fi
+
+enable_year2038=
+if test "${ENABLE_YEAR2038}" = "no" ; then
+ enable_year2038=no
+fi
# Check whether --enable-libquadmath was given.
if test "${enable_libquadmath+set}" = set; then :
hppa*64*-*-hpux*)
noconfigdirs="$noconfigdirs target-libffi"
;;
+ hppa*-hp-hpux11*)
+ ;;
+ hppa*-*-hpux*)
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
ia64*-*-*vms*)
noconfigdirs="$noconfigdirs target-libffi"
;;
h8500-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ hppa1.1-*-osf* | hppa1.1-*-bsd* )
+ ;;
hppa*64*-*-hpux*)
noconfigdirs="$noconfigdirs gdb"
;;
+ hppa*-*-hpux11*)
+ noconfigdirs="$noconfigdirs gdb ld"
+ ;;
hppa*64*-*-linux*)
;;
hppa*-*-linux*)
tic6x-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ tilepro*-*-* | tilegx*-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
;;
+# Handle --enable-host-pie
+# If host PIE executables are the default (or must be forced on) for some host,
+# we must pass that configuration to the gcc directory.
+gcc_host_pie=
+# Check whether --enable-host-pie was given.
+if test "${enable_host_pie+set}" = set; then :
+ enableval=$enable_host_pie; host_pie=$enableval
+ case $host in
+ *-*-darwin2*)
+ if test x$host_pie != xyes ; then
+ # for Darwin20+ this is required.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIE executables are required for the configured host, host-pie setting ignored." >&5
+$as_echo "$as_me: WARNING: PIE executables are required for the configured host, host-pie setting ignored." >&2;}
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ fi ;;
+ *) ;;
+ esac
+else
+ case $host in
+ *-*-darwin2*)
+ # Default to PIE (mandatory for aarch64).
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ ;;
+ *) host_pie=no ;;
+ esac
+fi
+
+
+
+
+
# Enable --enable-host-shared.
# Checked early to determine whether jit is an 'all' language
# Check whether --enable-host-shared was given.
x86_64-*-darwin* | aarch64-*-darwin*)
if test x$host_shared != xyes ; then
# PIC is the default, and actually cannot be switched off.
- echo configure.ac: warning: PIC code is required for the configured target, host-shared setting ignored. 1>&2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIC code is required for the configured host; host-shared setting ignored." >&5
+$as_echo "$as_me: WARNING: PIC code is required for the configured host; host-shared setting ignored." >&2;}
+ host_shared=yes
+ fi ;;
+ *-*-darwin*)
+ if test x$host_pie = xyes -a x$host_shared != xyes ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PIC code is required for PIE host executables host-shared setting ignored." >&5
+$as_echo "$as_me: WARNING: PIC code is required for PIE host executables host-shared setting ignored." >&2;}
host_shared=yes
fi ;;
*) ;;
esac
else
case $host in
+ # 64B x86_64 and Aarch64 Darwin default to PIC.
x86_64-*-darwin* | aarch64-*-darwin*) host_shared=yes ;;
- *) host_shared=no ;;
+ # 32B and powerpc64 Darwin must use PIC to link PIE exes.
+ *-*-darwin*) host_shared=$host_pie ;;
+ *) host_shared=no;;
esac
fi
+if test x$host_shared = xyes; then
+ case $host in
+ *-*-darwin*)
+ # Since host shared is the default for 64b Darwin, and also enabled for
+ # host_pie, ensure that we present the PIE flag when host_pie is active.
+ if test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+ fi
+ ;;
+ *)
+ PICFLAG=-fPIC
+ ;;
+ esac
+elif test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+else
+ PICFLAG=
+fi
+
+
+
# If we are building PIC/PIE host executables, and we are building dependent
# libs (e.g. GMP) in-tree those libs need to be configured to generate PIC
# code.
host_libs_picflag=
-if test "$host_shared" = "yes";then
+if test "$host_shared" = "yes" -o "$host_pie" = "yes"; then
host_libs_picflag='--with-pic'
fi
baseargs="$baseargs --silent"
tbaseargs="$tbaseargs --silent"
fi
+
baseargs="$baseargs --disable-option-checking"
tbaseargs="$tbaseargs --disable-option-checking"
+if test "$enable_year2038" = no; then
+ baseargs="$baseargs --disable-year2038"
+ tbaseargs="$tbaseargs --disable-year2038"
+fi
+
# Record and document user additions to sub configure arguments.
+GDCFLAGS=${GDCFLAGS-${CFLAGS}}
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -plugin option" >&5
+$as_echo_n "checking for -plugin option... " >&6; }
+
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+plugin_option=
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test "${AR}" = "" ; then
+ as_fn_error $? "Required archive tool 'ar' not found on PATH." "$LINENO" 5
+fi
+touch conftest.c
+${AR} $plugin_option rc conftest.a conftest.c
+if test "$?" != 0; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
+$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
+ plugin_option=
+fi
+rm -f conftest.*
+if test -n "$plugin_option"; then
+ PLUGIN_OPTION="$plugin_option"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $plugin_option" >&5
+$as_echo "$plugin_option" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+AR_PLUGIN_OPTION=
+RANLIB_PLUGIN_OPTION=
+if test -n "$PLUGIN_OPTION"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ AR_PLUGIN_OPTION="$PLUGIN_OPTION"
+ fi
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB_PLUGIN_OPTION="$PLUGIN_OPTION"
+ fi
+fi
+
+
# Target tools.
projects / thirdparty / gcc.git / blobdiff