m4_include([config/isl.m4])
AC_INIT(move-if-change)
-AC_PREREQ(2.64)
AC_DISABLE_OPTION_CHECKING
progname=$0
# these libraries are used by various programs built for the host environment
#f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv libctf"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
target-libstdc++-v3 \
target-libsanitizer \
target-libvtv \
- target-libmpx \
target-libssp \
target-libquadmath \
target-libgfortran \
target-libffi \
target-libobjc \
target-libada \
- target-libgo"
+ target-libgo \
+ target-libphobos \
+ target-zlib"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
fi
-# Enable libmpx on supported systems by request.
-if test -d ${srcdir}/libmpx; then
- if test x$enable_libmpx = x; then
- AC_MSG_CHECKING([for libmpx support])
- if (srcdir=${srcdir}/libmpx; \
- . ${srcdir}/configure.tgt; \
- test "$LIBMPX_SUPPORTED" != "yes")
- then
- AC_MSG_RESULT([no])
- noconfigdirs="$noconfigdirs target-libmpx"
- else
- AC_MSG_RESULT([yes])
- fi
- fi
-fi
-
# Disable libhsail-rt on unsupported systems.
if test -d ${srcdir}/libhsail-rt; then
if test x$enable_libhsail_rt = x; then
powerpc-*-aix* | rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libssp"
;;
+ pru-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
rl78-*-*)
# libssp uses a misaligned load to trigger a fault, but the RL78
# doesn't fault for those - instead, it gives a build-time error
esac
fi
+# Disable D on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=d.
+case ,${enable_languages}, in
+ *,d,*)
+ ;;
+ *)
+ case "${target}" in
+ *-*-darwin*)
+ unsupported_languages="$unsupported_languages d"
+ ;;
+ esac
+ ;;
+esac
+
+# Disable libphobos on unsupported systems.
+# For testing, you can override this with --enable-libphobos.
+if test -d ${srcdir}/libphobos; then
+ if test x$enable_libphobos = x; then
+ AC_MSG_CHECKING([for libphobos support])
+ if (srcdir=${srcdir}/libphobos; \
+ . ${srcdir}/configure.tgt; \
+ test "$LIBPHOBOS_SUPPORTED" != "yes")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libphobos"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable Fortran for some systems.
case "${target}" in
mmix-*-*)
powerpc*-*-*)
libgloss_dir=rs6000
;;
+ pru-*-*)
+ libgloss_dir=pru
+ ;;
sparc*-*-*)
libgloss_dir=sparc
;;
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
+ amdgcn*-*-*)
+ ;;
arm-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ nfp-*-*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof sim"
+ noconfigdirs="$noconfigdirs $target_libraries"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof"
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ wasm32-*-*)
+ noconfigdirs="$noconfigdirs ld"
+ ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
+ GDC_FOR_BUILD=${GDC_FOR_BUILD-gdc}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
GOC_FOR_BUILD="\$(GOC)"
+ GDC_FOR_BUILD="\$(GDC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
AC_LANG_PUSH(C++)
- AC_LINK_IFELSE([
+ AC_LINK_IFELSE([AC_LANG_SOURCE([
#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
#error -static-libstdc++ not implemented
#endif
-int main() {}],
+int main() {}])],
[AC_MSG_RESULT([yes]); have_static_libs=yes],
[AC_MSG_RESULT([no])])
AC_LANG_POP(C++)
bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
fi
-# If we are building libmpx and $BUILD_CONFIG contains bootstrap-mpx,
-# bootstrap it.
-if echo " ${target_configdirs} " | grep " libmpx " > /dev/null 2>&1; then
- case "$BUILD_CONFIG" in
- *bootstrap-mpx* )
- bootstrap_target_libs=${bootstrap_target_libs}target-libmpx,
- ;;
- esac
-fi
-
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
# extrasub-{build,host,target} not because there is any reason to split
# the substitutions up that way, but only to remain below the limit of
# 99 commands in a script, for HP-UX sed.
-# Do not nest @if/@endif pairs, because configure will not warn you at all.
+
+# Do not nest @if/@endif or @unless/@endunless pairs, because
+# configure will not warn you at all.
case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
yes:yes:*\ gold\ *:*,c++,*) ;;
extrasub_build="$extrasub_build
/^@if build-$module\$/d
/^@endif build-$module\$/d
+/^@unless build-$module\$/,/^@endunless build-$module\$/d
/^@if build-$module-$bootstrap_suffix\$/d
-/^@endif build-$module-$bootstrap_suffix\$/d"
+/^@endif build-$module-$bootstrap_suffix\$/d
+/^@unless build-$module-$bootstrap_suffix\$/,/^@endunless build-$module-$bootstrap_suffix\$/d"
done
extrasub_host=
for module in ${configdirs} ; do
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
+/^@unless $module\$/,/^@endunless $module\$/d
/^@if $module-$host_bootstrap_suffix\$/d
-/^@endif $module-$host_bootstrap_suffix\$/d"
+/^@endif $module-$host_bootstrap_suffix\$/d
+/^@unless $module-$host_bootstrap_suffix\$/,/^@endunless $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
extrasub_target="$extrasub_target
/^@if target-$module\$/d
/^@endif target-$module\$/d
+/^@unless target-$module\$/,/^@endunless target-$module\$/d
/^@if target-$module-$target_bootstrap_suffix\$/d
-/^@endif target-$module-$target_bootstrap_suffix\$/d"
+/^@endif target-$module-$target_bootstrap_suffix\$/d
+/^@unless target-$module-$target_bootstrap_suffix\$/,/^@endunless target-$module-$target_bootstrap_suffix\$/d"
done
# Do the final fixup along with target modules.
extrasub_target="$extrasub_target
-/^@if /,/^@endif /d"
+/^@if /,/^@endif /d
+/^@unless /d
+/^@endunless /d"
# Create the serialization dependencies. This uses a temporary file.
AC_SUBST(DLLTOOL_FOR_BUILD)
AC_SUBST(GFORTRAN_FOR_BUILD)
AC_SUBST(GOC_FOR_BUILD)
+AC_SUBST(GDC_FOR_BUILD)
AC_SUBST(LDFLAGS_FOR_BUILD)
AC_SUBST(LD_FOR_BUILD)
AC_SUBST(NM_FOR_BUILD)
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(OTOOL, otool)
NCN_STRICT_CHECK_TOOLS(READELF, readelf)
AC_SUBST(CC)
AC_SUBST(CXX)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
+NCN_STRICT_CHECK_TARGET_TOOLS(GDC_FOR_TARGET, gdc)
ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJCOPY_FOR_TARGET, objcopy)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OTOOL_FOR_TARGET, otool)
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
[gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
[gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
+GCC_TARGET_TOOL(gdc, GDC_FOR_TARGET, GDC,
+ [gcc/gdc -B$$r/$(HOST_SUBDIR)/gcc/], d)
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
GCC_TARGET_TOOL(objcopy, OBJCOPY_FOR_TARGET, OBJCOPY, [binutils/objcopy])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
+GCC_TARGET_TOOL(otool, OTOOL_FOR_TARGET, OTOOL)
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])