TEST=all-gcc
# Make sure you have a recent enough gcc (with ada support) in your path so
# that --enable-werror-always will work.
-# To use, create a sibling directory to the gcc sources and cd into this.
+# To use, create a build directory with plenty of free disk space - a build of
+# all configurations can take 450GB.
+# By default, this file assumes the build directory is in a sibling directory
+# to the gcc sources, but you can override GCC_SRC_DIR to specify where to
+# find them. GCC_SRC_DIR is used in the directory below the build directory,
+# hence the two ".." in the default value; if overriding it, it's easiest to
+# supply an absolute path.
+GCC_SRC_DIR=../../gcc
+
# Use -j / -l make arguments and nice to assure a smooth resource-efficient
# load on the build machine, e.g. for 24 cores:
# svn co svn://gcc.gnu.org/svn/gcc/branches/foo-branch gcc
# mkdir multi-mk; cd multi-mk
# nohup nice make -j25 -l36 -f ../gcc/contrib/config-list.mk > make.out 2>&1 &
#
+# Alternatively, if building against an existing gcc source tree:
+#
+# cd /somewhere/with/plenty/of/disk/space
+# mkdir multi-mk; cd multi-mk
+# nohup nice make \
+# -j25 -l36 \
+# -f /path/to/contrib/config-list.mk \
+# GCC_SRC_DIR=/path/to/gcc/source/tree \
+# > make.out 2>&1 &
+#
+
# v850e1-elf is rejected by config.sub
-LIST = aarch64-elf aarch64-linux-gnu \
- alpha-linux-gnu alpha-freebsd6 alpha-netbsd alpha-openbsd \
- alpha64-dec-vms alpha-dec-vms am33_2.0-linux \
+LIST = aarch64-elf aarch64-linux-gnu aarch64-rtems \
+ alpha-linux-gnu alpha-netbsd alpha-openbsd \
+ alpha64-dec-vms alpha-dec-vms \
+ amdgcn-amdhsa \
arc-elf32OPT-with-cpu=arc600 arc-elf32OPT-with-cpu=arc700 \
arc-linux-uclibcOPT-with-cpu=arc700 arceb-linux-uclibcOPT-with-cpu=arc700 \
arm-wrs-vxworks arm-netbsdelf \
arm-linux-androideabi arm-uclinux_eabi arm-eabi arm-rtems \
- arm-symbianelf avr-rtems avr-elf \
+ arm-symbianelf avr-elf \
bfin-elf bfin-uclinux bfin-linux-uclibc bfin-rtems bfin-openbsd \
+ bpf-unknown-none \
c6x-elf c6x-uclinux cr16-elf cris-elf cris-linux crisv32-elf crisv32-linux \
+ csky-elf csky-linux-gnu \
epiphany-elf epiphany-elfOPT-with-stack-offset=16 fido-elf \
- fr30-elf frv-elf frv-linux h8300-elf h8300-rtems hppa-linux-gnu \
+ fr30-elf frv-elf frv-linux ft32-elf h8300-elf hppa-linux-gnu \
hppa-linux-gnuOPT-enable-sjlj-exceptions=yes hppa64-linux-gnu \
hppa2.0-hpux10.1 hppa64-hpux11.3 \
hppa64-hpux11.0OPT-enable-sjlj-exceptions=yes hppa2.0-hpux11.9 \
i686-pc-linux-gnu i686-apple-darwin i686-apple-darwin9 i686-apple-darwin10 \
i486-freebsd4 i686-freebsd6 i686-kfreebsd-gnu \
- i686-netbsdelf9 i686-knetbsd-gnu i686-openbsd i686-openbsd3.0 \
- i686-elf i686-kopensolaris-gnu i686-symbolics-gnu i686-pc-msdosdjgpp \
- i686-lynxos i686-nto-qnx \
- i686-rtems i686-solaris2.10 i686-wrs-vxworks \
+ i686-netbsdelf9 \
+ i686-openbsd i686-elf i686-kopensolaris-gnu i686-symbolics-gnu \
+ i686-pc-msdosdjgpp i686-lynxos i686-nto-qnx \
+ i686-rtems i686-solaris2.11 i686-wrs-vxworks \
i686-wrs-vxworksae \
i686-cygwinOPT-enable-threads=yes i686-mingw32crt ia64-elf \
ia64-freebsd6 ia64-linux ia64-hpux ia64-hp-vms iq2000-elf lm32-elf \
- lm32-rtems lm32-uclinux m32c-rtems m32c-elf m32r-elf m32rle-elf m32r-rtems \
+ lm32-rtems lm32-uclinux m32c-rtems m32c-elf m32r-elf m32rle-elf \
m32r-linux m32rle-linux m68k-elf m68k-netbsdelf \
m68k-openbsd m68k-uclinux m68k-linux m68k-rtems \
- mcore-elf mep-elf microblaze-linux microblaze-elf \
+ mcore-elf microblaze-linux microblaze-elf \
mips-netbsd \
mips64el-st-linux-gnu mips64octeon-linux mipsisa64r2-linux \
mipsisa32r2-linux-gnu mipsisa64r2-sde-elf mipsisa32-elfoabi \
mipsel-elf mips64-elf mips64vr-elf mips64orion-elf mips-rtems \
mips-wrs-vxworks mipstx39-elf mmix-knuth-mmixware mn10300-elf moxie-elf \
moxie-uclinux moxie-rtems \
- msp430-elf \
+ msp430-elf msp430-elfbare \
nds32le-elf nds32be-elf \
nios2-elf nios2-linux-gnu nios2-rtems \
+ nvptx-none \
pdp11-aout \
powerpc-darwin8 \
powerpc-darwin7 powerpc64-darwin powerpc-freebsd6 powerpc-netbsd \
- powerpc-eabispe powerpc-eabisimaltivec powerpc-eabisim ppc-elf \
+ powerpc-eabisimaltivec powerpc-eabisim ppc-elf \
powerpc-eabialtivec powerpc-xilinx-eabi powerpc-eabi \
- powerpc-rtems powerpc-linux_spe \
- powerpc-linux_paired powerpc64-linux_altivec \
+ powerpc-rtems \
+ powerpc64-linux_altivec \
powerpc-wrs-vxworks powerpc-wrs-vxworksae powerpc-wrs-vxworksmils \
powerpc-lynxos powerpcle-elf \
- powerpcle-eabisim powerpcle-eabi rs6000-ibm-aix4.3 rs6000-ibm-aix5.1.0 \
- rs6000-ibm-aix5.2.0 rs6000-ibm-aix5.3.0 rs6000-ibm-aix6.0 \
+ powerpcle-eabisim powerpcle-eabi \
+ riscv32-unknown-linux-gnu riscv64-unknown-linux-gnu \
+ rs6000-ibm-aix5.3.0 rs6000-ibm-aix6.1 rs6000-ibm-aix7.1 \
rl78-elf rx-elf s390-linux-gnu s390x-linux-gnu s390x-ibm-tpf sh-elf \
- shle-linux sh-netbsdelf sh-superh-elf sh5el-netbsd sh64-netbsd sh64-linux \
- sh64-elfOPT-with-newlib sh-rtems sh-wrs-vxworks sparc-elf \
+ shle-linux sh-netbsdelf sh-superh-elf \
+ sh-rtems sh-wrs-vxworks sparc-elf \
sparc-leon-elf sparc-rtems sparc-linux-gnu \
sparc-leon3-linux-gnuOPT-enable-target=all sparc-netbsdelf \
- sparc64-sun-solaris2.10OPT-with-gnu-ldOPT-with-gnu-asOPT-enable-threads=posix \
+ sparc64-sun-solaris2.11OPT-with-gnu-ldOPT-with-gnu-asOPT-enable-threads=posix \
sparc-wrs-vxworks sparc64-elf sparc64-rtems sparc64-linux sparc64-freebsd6 \
- sparc64-netbsd sparc64-openbsd spu-elf \
+ sparc64-netbsd sparc64-openbsd \
tilegx-linux-gnu tilegxbe-linux-gnu tilepro-linux-gnu \
v850e-elf v850-elf v850-rtems vax-linux-gnu \
- vax-netbsdelf vax-openbsd x86_64-apple-darwin \
+ vax-netbsdelf vax-openbsd visium-elf x86_64-apple-darwin \
x86_64-pc-linux-gnuOPT-with-fpmath=avx \
x86_64-elfOPT-with-fpmath=sse x86_64-freebsd6 x86_64-netbsd \
- x86_64-knetbsd-gnu x86_64-w64-mingw32 \
- x86_64-mingw32OPT-enable-sjlj-exceptions=yes xstormy16-elf xtensa-elf \
- xtensa-linux \
- i686-interix3OPT-enable-obsolete
+ x86_64-w64-mingw32 \
+ x86_64-mingw32OPT-enable-sjlj-exceptions=yes x86_64-rtems \
+ xstormy16-elf xtensa-elf \
+ xtensa-linux
LOGFILES = $(patsubst %,log/%-make.out,$(LIST))
all: $(LOGFILES)
empty=
-#Check for the presence of the MAINTAINERS file to make sure we are in a
-#suitable current working directory.
-make-log-dir: ../gcc/MAINTAINERS
- mkdir log
+#Check for the presence of the MAINTAINERS file to make sure we've located
+#the gcc sources.
+make-log-dir: $(GCC_SRC_DIR)/MAINTAINERS
+ -mkdir log
$(LIST): make-log-dir
-mkdir $@
( \
cd $@ && \
TGT=`echo $@ | awk 'BEGIN { FS = "OPT" }; { print $$1 }'` && \
- TGT=`../../gcc/config.sub $$TGT` && \
+ TGT=`$(GCC_SRC_DIR)/config.sub $$TGT` && \
case $$TGT in \
- *-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*) \
+ *-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix* | bpf-*-*) \
ADDITIONAL_LANGUAGES=""; \
;; \
*) \
ADDITIONAL_LANGUAGES=",go"; \
;; \
esac && \
- ../../gcc/configure \
+ $(GCC_SRC_DIR)/configure \
--target=$(subst SCRIPTS,`pwd`/../scripts/,$(subst OPT,$(empty) -,$@)) \
--enable-werror-always ${host_options} \
--enable-languages=all,ada$$ADDITIONAL_LANGUAGES; \