libgcov-util.o-warn = -Wno-error
libgcov-driver-tool.o-warn = -Wno-error
libgcov-merge-tool.o-warn = -Wno-error
+gimple-match.o-warn = -Wno-unused-variable -Wno-unused-parameter
+generic-match.o-warn = -Wno-unused-variable -Wno-unused-parameter
# All warnings have to be shut off in stage1 if the compiler used then
# isn't gcc; configure determines that. WARN_CFLAGS will be either
$(shell expr $(range) + $(write_entries_to_file_split) - 1), $(1))" \
| tr ' ' '\012' >> $(2)))
+# The jit documentation looks better if built with sphinx, but can be
+# built with texinfo if sphinx is not available.
+# configure sets "doc_build_sys" to "sphinx" or "texinfo" accordingly
+doc_build_sys=@doc_build_sys@
+
# --------
# UNSORTED
# --------
gimple-iterator.o \
gimple-fold.o \
gimple-low.o \
+ gimple-match.o \
+ generic-match.o \
gimple-pretty-print.o \
gimple-ssa-isolate-paths.o \
gimple-ssa-strength-reduction.o \
graphds.o \
graphite.o \
graphite-blocking.o \
- graphite-clast-to-gimple.o \
graphite-isl-ast-to-gimple.o \
graphite-dependences.o \
graphite-interchange.o \
incpath.o \
init-regs.o \
internal-fn.o \
+ ipa-chkp.o \
ipa-cp.o \
ipa-devirt.o \
ipa-polymorphic-call.o \
reload1.o \
reorg.o \
resource.o \
+ rtl-chkp.o \
rtl-error.o \
rtl.o \
rtlhash.o \
asan.o \
tsan.o \
ubsan.o \
+ sanopt.o \
tree-call-cdce.o \
tree-cfg.o \
tree-cfgcleanup.o \
tree-outof-ssa.o \
tree-parloops.o \
tree-phinodes.o \
+ tree-chkp.o \
+ tree-chkp-opt.o \
tree-predcom.o \
tree-pretty-print.o \
tree-profile.o \
# front-end checking.
TREECHECKING = @TREECHECKING@
+# The full name of the driver on installation
+FULL_DRIVER_NAME=$(target_noncanonical)-gcc-$(version)$(exeext)
+
MOSTLYCLEANFILES = insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attr-common.h insn-attrtab.c insn-dfatab.c \
insn-latencytab.c insn-opinit.c insn-opinit.h insn-preds.c insn-constants.h \
- tm-preds.h tm-constrs.h checksum-options \
+ tm-preds.h tm-constrs.h checksum-options gimple-match.c generic-match.c \
tree-check.h min-insn-modes.c insn-modes.c insn-modes.h \
genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-input.list \
- xgcc$(exeext) cpp$(exeext) \
+ xgcc$(exeext) cpp$(exeext) $(FULL_DRIVER_NAME) \
$(EXTRA_PROGRAMS) gcc-cross$(exeext) \
$(SPECS) collect2$(exeext) gcc-ar$(exeext) gcc-nm$(exeext) \
gcc-ranlib$(exeext) \
gengtype$(exeext) *.[0-9][0-9].* *.[si] *-checksum.c libbackend.a \
libcommon-target.a libcommon.a libgcc.mk
+# This symlink makes the full installation name of the driver be available
+# from within the *build* directory, for use when running the JIT library
+# from there (e.g. when running its testsuite).
+$(FULL_DRIVER_NAME): ./xgcc
+ $(LN) -s $< $@
+
#\f
# Language makefile fragments.
$(srcdir)/../config/codeset.m4 \
$(srcdir)/../config/extensions.m4 \
$(srcdir)/../config/gettext-sister.m4 \
+ $(srcdir)/../config/gcc-plugin.m4 \
$(srcdir)/../config/iconv.m4 \
$(srcdir)/../config/lcmessage.m4 \
$(srcdir)/../config/lib-ld.m4 \
.PRECIOUS: insn-config.h insn-flags.h insn-codes.h insn-constants.h \
insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
insn-attr.h insn-attr-common.h insn-attrtab.c insn-dfatab.c \
- insn-latencytab.c insn-preds.c
+ insn-latencytab.c insn-preds.c gimple-match.c generic-match.c
# Dependencies for the md file. The first time through, we just assume
# the md file itself and the generated dependency file (in order to get
false; \
fi
+gimple-match.c: s-match gimple-match-head.c ; @true
+generic-match.c: s-match generic-match-head.c ; @true
+
+s-match: build/genmatch$(build_exeext) $(srcdir)/match.pd
+ $(RUN_GEN) build/genmatch$(build_exeext) --gimple $(srcdir)/match.pd \
+ > tmp-gimple-match.c
+ $(RUN_GEN) build/genmatch$(build_exeext) --generic $(srcdir)/match.pd \
+ > tmp-generic-match.c
+ $(SHELL) $(srcdir)/../move-if-change tmp-gimple-match.c \
+ gimple-match.c
+ $(SHELL) $(srcdir)/../move-if-change tmp-generic-match.c \
+ generic-match.c
+ $(STAMP) s-match
+
GTFILES = $(CPP_ID_DATA_H) $(srcdir)/input.h $(srcdir)/coretypes.h \
$(host_xm_file_list) \
$(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) $(srcdir)/bitmap.h \
$(srcdir)/libfuncs.h $(SYMTAB_H) \
$(srcdir)/real.h $(srcdir)/function.h $(srcdir)/insn-addr.h $(srcdir)/hwint.h \
$(srcdir)/fixed-value.h \
- $(srcdir)/output.h $(srcdir)/cfgloop.h \
+ $(srcdir)/output.h $(srcdir)/cfgloop.h $(srcdir)/cfg.h \
$(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/ipa-ref.h $(srcdir)/cgraph.h \
$(srcdir)/reload.h $(srcdir)/caller-save.c $(srcdir)/symtab.c \
$(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(srcdir)/gimple.h \
$(srcdir)/gimple-ssa.h \
+ $(srcdir)/tree-chkp.c \
$(srcdir)/tree-ssanames.c $(srcdir)/tree-eh.c $(srcdir)/tree-ssa-address.c \
$(srcdir)/tree-cfg.c \
$(srcdir)/tree-dfa.c \
$(srcdir)/asan.c \
$(srcdir)/ubsan.c \
$(srcdir)/tsan.c \
+ $(srcdir)/sanopt.c \
$(srcdir)/ipa-devirt.c \
$(srcdir)/internal-fn.h \
@all_gtfiles@
$(RTL_H) $(GGC_H) errors.h
build/vec.o : vec.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(VEC_H) \
$(GGC_H) toplev.h $(DIAGNOSTIC_CORE_H)
+build/hash-table.o : hash-table.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
+ $(HASH_TABLE_H) $(GGC_H) toplev.h $(DIAGNOSTIC_CORE_H)
build/gencondmd.o : build/gencondmd.c $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) insn-constants.h \
$(filter-out insn-flags.h, $(RTL_H) $(TM_P_H) $(FUNCTION_H) $(REGS_H) \
$(COMMON_TARGET_DEF) $(BCONFIG_H) $(SYSTEM_H) errors.h
build/genmddump.o : genmddump.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h
+build/genmatch.o : genmatch.c $(BCONFIG_H) $(SYSTEM_H) \
+ coretypes.h errors.h $(HASH_TABLE_H) hash-map.h $(GGC_H)
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(COMPILER_FOR_BUILD), and associated libraries,
$(genprogerr:%=build/gen%$(build_exeext)): $(BUILD_ERRORS)
# Remaining build programs.
-genprog = $(genprogerr) check checksum condmd
+genprog = $(genprogerr) check checksum condmd match
# These programs need libs over and above what they get from the above list.
build/genautomata$(build_exeext) : BUILD_LIBS += -lm
+# For stage1 and when cross-compiling use the build libcpp which is
+# built with NLS disabled. For stage2+ use the host library and
+# its dependencies.
+ifeq ($(build_objdir),$(build_libobjdir))
+BUILD_CPPLIB = $(build_libobjdir)/libcpp/libcpp.a
+else
+BUILD_CPPLIB = $(CPPLIB) $(LIBIBERTY)
+build/genmatch$(build_exeext): BUILD_LIBDEPS += $(LIBINTL_DEP) $(LIBICONV_DEP)
+build/genmatch$(build_exeext): BUILD_LIBS += $(LIBINTL) $(LIBICONV)
+endif
+
+build/genmatch$(build_exeext) : $(BUILD_CPPLIB) \
+ $(BUILD_ERRORS) build/vec.o build/hash-table.o
+
# These programs are not linked with the MD reader.
build/gengtype$(build_exeext) : build/gengtype-lex.o build/gengtype-parse.o \
build/gengtype-state.o build/version.o build/errors.o
configfiles.texi collect2.texi headerdirs.texi funding.texi \
gnu.texi gpl_v3.texi fdl.texi contrib.texi languages.texi \
sourcebuild.texi gty.texi libgcc.texi cfg.texi tree-ssa.texi \
- loop.texi generic.texi gimple.texi plugins.texi optinfo.texi
+ loop.texi generic.texi gimple.texi plugins.texi optinfo.texi \
+ match-and-simplify.texi
TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi \
gcc-common.texi gcc-vers.texi
-rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
-$(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
-if [ "$(GCC_INSTALL_NAME)" != "$(target_noncanonical)-gcc-$(version)" ]; then \
- rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-$(version)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(FULL_DRIVER_NAME); \
( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-$(version)$(exeext) ); \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(FULL_DRIVER_NAME) ); \
fi
-if [ ! -f gcc-cross$(exeext) ] \
&& [ "$(GCC_INSTALL_NAME)" != "$(GCC_TARGET_INSTALL_NAME)" ]; then \
projects / thirdparty / gcc.git / blobdiff